Layered Double Hydroxide onto Perovskite Oxide-Decorated ZnO Nanorods for Modulation of Carrier Transfer Behavior in Photoelectrochemical Water Oxidation

Polymeric viologen-based electron transfer mediator for improving the photoelectrochemical water splitting on Sb2Se3 photocathode

The photogenerated charge carrier separation and transportation of inside photocathodes can greatly influence the performance of photoelectrochemical (PEC) H2 production devices. Coupling TiO2 with p-type semiconductors to construct heterojunction structures is one of the most widely used strategies to facilitate charge separation and transportation. However, the band position of TiO2 could not perfectly match with all p-type semiconductors. Here, taking antimony selenide (Sb2Se3) as an example, a rational strategy was developed by introducing a viologen electron transfer mediator (ETM) containing polymeric film (poly-1,1'-dially-[4,4'-bipyridine]-1,1'-diium, denoted as PV2+) at the interface between Sb2Se3 and TiO2 to regulate the energy band alignment, which could inhibit the recombination of photogenerated charge carriers of interfaces. With Pt as a catalyst, the constructed Sb2Se3/PV2+/TiO2/Pt photocathode showed a superior PEC hydrogen generation activity with a photocurrent density of -18.6 mA cm-2 vs. a reversible hydrogen electrode (RHE) and a half-cell solar-to-hydrogen efficiency (HC-STH) of 1.54% at 0.17 V vs. RHE, which was much better than that of the related Sb2Se3/TiO2/Pt photocathode without PV2+ (-9.8 mA cm-2, 0.51% at 0.10 V vs. RHE).

Direct Z-Scheme Heterostructure of Vertically Oriented SnS2 Nanosheet on BiVO4 Nanoflower for Self-Powered Photodetectors and Water Splitting

The construction of nanostructured Z-scheme heterostructure is a powerful strategy for realizing high-performance photoelectrochemical (PEC) devices such as self-powered photodetectors and water splitting. Considering the band structure and internal electric field direction, BiVO4 is a promising candidate to construct SnS2 -based heterostructure. Herein, the direct Z-scheme heterostructure of vertically oriented SnS2 nanosheet on BiVO4 nanoflower is rationally fabricated for efficient self-powered PEC photodetectors. The Z-scheme heterostructure is identified by ultraviolet photoelectron spectroscopy, photoluminescence spectroscopy, PEC measurement, and water splitting. The SnS2 /BiVO4 heterostructure shows a superior photodetection performance such as excellent photoresponsivity (10.43 mA W-1 ), fast response time (6 ms), and long-term stability. Additionally, by virtue of efficient Z-scheme charge transfer and unique light-trapping nanostructure, the SnS2 /BiVO4 heterostructure also displays a remarkable photocatalytic hydrogen production rate of 54.3 µmol cm-2 h-1 in Na2 SO3 electrolyte. Furthermore, the synergistic effect between photo-activation and bias voltage further improves the PEC hydrogen production rate of 360 µmol cm-2 h-1 at 0.8 V, which is an order of magnitude above the BiVO4 . The results provide useful inspiration for designing direct Z-scheme heterostructures with special nanostructured morphology to signally promote the performance of PEC devices.

Bi2 Te3 /Bi2 Se3 /Bi2 S3 Cascade Heterostructure for Fast-Response and High-Photoresponsivity Photodetector and High-Efficiency Water Splitting with a Small Bias Voltage

Large-scale multi-heterostructure and optimal band alignment are significantly challenging but vital for photoelectrochemical (PEC)-type photodetector and water splitting. Herein, the centimeter-scale bismuth chalcogenides-based cascade heterostructure is successfully synthesized by a sequential vapor phase deposition method. The multi-staggered band alignment of Bi₂ Te₃ /Bi₂ Se₃ /Bi₂ S₃ is optimized and verified by X-ray photoelectron spectroscopy. The PEC photodetectors based on these cascade heterostructures demonstrate the highest photoresponsivity (103 mA W^-1 at -0.1 V and 3.5 mAW^-1 at 0 V under 475 nm light excitation) among the previous reports based on two-dimensional materials and related heterostructures. Furthermore, the photodetectors display a fast response (≈8 ms), a high detectivity (8.96 × 10⁹ Jones), a high external quantum efficiency (26.17%), and a high incident photon-to-current efficiency (27.04%) at 475 nm. Due to the rapid charge transport and efficient light absorption, the Bi₂ Te₃ /Bi₂ Se₃ /Bi₂ S₃ cascade heterostructure demonstrates a highly efficient hydrogen production rate (≈0.416 mmol cm^-2  h^-1 and ≈14.320 µmol cm^-2  h^-1 with or without sacrificial agent, respectively), which is far superior to those of pure bismuth chalcogenides and its type-II heterostructures. The large-scale cascade heterostructure offers an innovative method to improve the performance of optoelectronic devices in the future.

A phase transition-induced photocathodic p-CuFeO2 nanocolumnar film by reactive ballistic deposition

Vertical nanocolumnar Cu–Fe–O electrodes synthesized by the reactive ballistic deposition technique followed by heat treatment in an Ar atmosphere undergo a switch for conductivity at elevated temperatures.

Boosting photoelectrochemical activity of bismuth vanadate by implanting oxygen-vacancy-rich cobalt (oxy)hydroxide

Surface charge recombination is regarded as a detrimental factor that severely downgrades the photoelectrochemical (PEC) performance of bismuth vanadate (BiVO₄). In this work, we demonstrate defect-rich cobalt (oxy)hydroxides (Co(O)OH) as an excellent cocatalyst nanolayer sheathed on BiVO₄ to substantially improve the PEC water oxidation activity. The self-transformation of metal-organic framework produces an ultrathin Co(O)OH layer rich in oxygen vacancies, which could serve as a powerful hole extraction engine to promote the charge transfer/separation efficiency as well as an excellent oxygen evolution reaction catalyst to accelerate the surface water oxidation kinetics. As a result, the BiVO₄/Co(O)OH hybrid photoanode achieves remarkably inhibited surface charge recombination and presents a prominent photocurrent density of 4.2 mA cm^-2 at 1.23 V vs. RHE, which is around 2.6-fold higher than that of the pristine BiVO₄. Moreover, the Co(O)OH cocatalyst nanolayer significantly reduces the onset potential of BiVO₄ photoanodes by 200 mV. This work provides a versatile strategy for rationally preparing oxygen-vacancy-rich cocatalysts on various photoanodes toward high-efficient PEC water oxidation.

Synthesis of Nano-ZnO/Diatomite Composite and Research on Photoelectric Application

The key to the commercialization of sustainable energy conversion technologies is the development of high-performance catalysts. The discovery of a stable, efficient, and low-cost multi-function catalysts is the key. We used a simple green precipitation method to load nanozinc oxide particles onto a diatomite substrate. The ZnO is nano-sized. This precipitation method produces ZnO nanoparticles in situ on diatomite. The catalysts degraded 90% of Methylene blue solution and also degraded gaseous benzene and gaseous acetone. Not only can the catalysts be used for the organic degradation of wastewater, but it also has the potential to degrade volatile organic compounds. Photocatalytic efficiency is closely related to the generation and separation of photogenerated electrons and holes. The effective suppression of the recombination rate of photoliving carriers and thus improvement of the photocatalytic activity, has become a key research area. At present, photocatalysis is an effective technology to inhibit photogenerated carrier recombination, which is often studied in sewage treatment. Photoelectrochemical decomposition of water reduces the recombination of photogenerated electrons and holes by applying an external bias, thus improving the quantum efficiency for the complete mineralization of organic pollutants. The composite catalysts were used for oxygen and hydrogen extraction reactions, and a comparison of the catalysts with various loading ratios showed that the photoelectrochemical decomposition of water activity of the composite catalysts are due to pure ZnO, and the efficiency is highest when the loading ratio is 10%. This work provides new methods for the design and further optimization of the preparation of photoelectrochemical decomposition of water catalysts.

Transition metal-based layered double hydroxides for photo(electro)chemical water splitting: a mini review

The conversion of solar energy into usable chemical fuels, such as hydrogen gas, via photo(electro)chemical water splitting is a promising approach for creating a carbon neutral energy ecosystem. The deployment of this technology industrially and at scale requires photoelectrodes that are highly active, cost-effective, and stable. To create these new photoelectrodes, transition metal-based electrocatalysts have been proposed as potential cocatalysts for improving the performance of water splitting catalysts. Layered double hydroxides (LDHs) are a class of clays with brucite like layers and intercalated anions. Transition metal-based LDHs are increasingly popular in the field of photo(electro)chemical water splitting due to their unique physicochemical properties. This article aims to review recent advances in transition metal-based LDHs for photo(electro)chemical water splitting. This article provides a brief overview of the research in a format approachable for the general scientific audience. Specifically, this review examines the following areas: (i) routes for synthesis of transition metal-based LDHs, (ii) recent developments in transition metal-based LDHs for photo(electro)chemical water splitting, and (iii) an overview of the structure-property relationships therein.

The enhanced water splitting activity of a ZnO-based photoanode by modification with self-doped lanthanum ferrite

The difficult separation and transfer of photoexcited charge carriers in composite photoelectrodes is a decisive factor limiting the efficiencies of semiconductor-based photoelectrochemical water splitting systems. Herein, to further enhance the photoelectrochemical properties of ZnO-based photoanodes, we constructed composite ZnO nanoarray photoanodes with Fe-self-doped lanthanum ferrite (denoted as La1-xFe1+xO3/ZnO NRs), which had the effect of killing two birds with one stone. This improvement strategy differs from the previously popular multi-step modification process, and integrates the dual benefits of a heterojunction and cocatalyst using the same material, the doped LaFeO3, which bypasses the shortcomings of multi-step charge transfer. Gratifyingly, benefitting from the suitable energy bands and excellent electrocatalytic oxygen evolution activity of La0.9Fe1.1O3, the photoanode exhibits outstanding bulk charge separation and surface charge utilization efficiencies, as well as achieving a photocurrent density that is over three times higher than that of pristine ZnO NRs, with a small onset potential (0.33 V vs. RHE). This electrode modification concept provides guidance for the development of other highly active photoelectrodes.

Self-Driven Multiplex Reaction: Reactant and Product Diffusion via a Transpiration-Inspired Capillary

When dealing with reactions of a liquid reactant and a solid catalyst, macroreactors with vigorous stirring equipment may be dangerous and cause wastage of energy. Reducing the diffusion distance and promoting reactants to reach the catalyst surface for efficient reaction remain the key challenges. Here, inspired by capillary-driven water motion in plants, we propose to implement a self-driven multiplex reaction (SMR) in nanocatalyst-loaded microchannels. Unlike the classical capillary rise, the droplet in SMR has variable pressure difference, leading to tunable flow velocity for controlling the reaction rate without any auxiliary equipment. The SMR in microchannels contributes to an increase in the reaction rate by more than 2 orders of magnitude compared to that in macroreactors. Specifically, this strategy reduces the reaction volume by 170 times, the catalyst usage by about 12 times, and the energy consumption by 50 times. This apparatus with a small volume and less catalyst content promises to provide an efficient strategy for the precise manipulation of chemical reactions.

A highly selective and recyclable sensor for the electroanalysis of phosphothioate pesticides using silver-doped ZnO nanorods arrays

Silver-doped ZnO nanorods (Ag/ZnO) arrays have in-situ grown onto indium tin oxide (ITO) via the one-pot hydrothermal route towards a highly selective and recyclable electroanalysis of phosphothioate pesticides (PTs) with phoxim (Phox) as a model. It was discovered that the Ag/ZnO arrays-modified electrode could obtain a steady and sharp electrochemical output of solid-state Ag/AgCl at a low potential (i.e., 0.12 V). More importantly, the achieved Ag/AgCl signals could decrease selectively induced by sulfide (S)-containing Phox by the specific Cl-S displacement reaction, which would trigger AgCl into non-electroactive Ag-Phox complex. The Ag/ZnO arrays-modified sensors present a linear range from 0.050 to 700.0 μM for the detection of Phox, with a limit of detection down to 0.010 μM. The practical applicability of the developed electroanalysis strategy was successfully employed to detect Phox in the tap water and cabbage samples. Moreover, the photocatalytic performances of the Ag/ZnO arrays were subsequently verified for the degradation of Phox, displaying the higher photocatalytic efficiency than pure ZnO nanorods. Besides, the as-developed sensor can allow for the recyclable detection of Phox by the Ag/ZnO-photocatalyzed removal of Phox after each of the detection cycles. Therefore, the sensors platform based on Ag/ZnO arrays can be expected to have potential for the electrochemical monitoring and photocatalytic degradation of toxic pesticides in the food and environmental fields.

Fabrication, characterization and photoelectrochemical properties of CdS/CdSe nanofilm co-sensitized ZnO nanorod arrays on Zn foil substrate

The photoelectrochemical (PEC) performance of ZnO is restricted by its low light absorption ability and high recombination rate of photogenerated carriers. In order to overcome these drawbacks, ZnO/CdS/CdSe heterostructures are prepared on Zn foil substrate using facile three-step methods containing hydrothermal growth, successive ionic layer adsorption reaction (SILAR) and modified chemical bath deposition (CBD). The effects of process parameters containing the number of SILAR cycles of CdS, sensitization sequence of CdS and CdSe, and precursors of CdSe on PEC performance of ZnO/CdS/CdSe heterostructures, and ZnO NRAs on PEC performance of CdS/CdSe co-sensitizer have been scrutinized. Through CdS and CdSe co-sensitization, a layer of CdS/CdSe nanofilm is conformally deposited on ZnO nanorod arrays (NRAs) observed by transmission electron microscopy (TEM). Both the visible-light absorption ability and separation efficiency of photogenerated carriers of ZnO NRAs are significantly enhanced evidenced by UV-vis diffuse reflectance absorption spectra, photoluminescence (PL) spectra and electrochemical impedance spectra. Due to the synergistic effect of ZnO NRAs and CdS/CdSe co-sensitizer, the ZnO/CdS/CdSe heterostructures with five SILAR cycles and one modified CBD cycle (ZnO-CdS5-CdSe) show efficient PEC properties with photocurrent density of 6.244 mA/cm² at -0.2 V vs Ag/AgCl under light illumination of 100 mW/cm², which are 57.28 and 4.73 times higher than those of pristine ZnO NRAs and CdS/CdSe clusters, respectively. Moreover, the photoconversion efficiency and incident photon to current conversion efficiency (IPCE) of the ZnO-CdS5-CdSe photoanode reach 4.381% and 80.92%, respectively. The heterostructures based on Zn foil substrate in this study can be a promising candidate for practical PEC application and other applications such as photocatalytic degradation and solar cell due to its low manufacturing cost, large-scale production and efficient PEC ability.

A promising p-type Co-ZnFe2O4 nanorod film as a photocathode for photoelectrochemical water splitting

A p-type Co-ZnFe₂O₄ film with a one-dimensional (1D) rod-like morphology is fabricated for the first time on fluorine-doped tin oxide (FTO) through a hydrothermal reaction and sintering treatment. The p-type Co-ZnFe₂O₄ is obtained by doping Co ions into n-type ZnFe₂O₄, in which Zn sites are substituted by Co. Compared with the n-type ZnFe₂O₄, the light absorption edge of Co-ZnFe₂O₄ is clearly shifted from 589 to 624 nm, and the positions of the valence/conduction band of Co-ZnFe₂O₄ meet the thermodynamic requirements for water splitting. The photocurrent density of p-type Co-ZnFe₂O₄ is -0.22 mA cm^-2 at 0 V vs. the reversible hydrogen electrode (RHE), which is enhanced 7.33-times vs. that of n-type ZnFe₂O₄ (-0.03 mA cm^-2 at 0 V vs. RHE). This work provides useful insights into tuning the p-n character of semiconductors to realize efficient photoelectrochemical (PEC) water splitting.

Unveiling the Effects of Nanostructures and Core Materials on Charge-Transport Dynamics in Heterojunction Electrodes for Photoelectrochemical Water Splitting

Understanding the photogenerated charge-transport dynamics of metal oxide electrodes is the key to providing a strategy for practical improvement in the photoelectrochemical reaction activity. Here, we analyze the electron transport of a 3D bicontinuous SnO₂/BiVO₄ nanostructured photoelectrode by intensity-modulated photocurrent spectroscopy. We compare this electrode with 3D WO₃/BiVO₄ and planar-type bilayer SnO₂/BiVO₄ electrodes. In the results, we observe an order of magnitude faster electron transport in the 3D electrodes relative to the bilayer electrode. Moreover, we observe trap-limited transport on widely applied WO₃/BiVO₄ electrodes but confirm rapid trap-free transport on 3D SnO₂/BiVO₄. We also characterize the effect of electron transport on the water-splitting reaction. The electron-transport rate is directly related to the charge-separation efficiency in the water-splitting reaction. The fast transport time of the 3D SnO₂/BiVO₄ leads to the achievement of a significantly higher charge separation efficiency of 94%.