Fabrication of Mixed-Charge Polypeptide Coating for Enhanced Hemocompatibility and Anti-Infective Effect

On-demand bactericidal and self-adaptive antifouling hydrogels for self-healing and lubricant coatings of catheters

Catheter-related infections are one of the most common nosocomial infections with increasing morbidity and mortality, and robust antibacterial or antifouling catheter coatings remain great challenges for long-term implantation. Herein, multifunctional hydrogel coatings were developed to provide persistent and self-adaptive antifouling and antibacterial effects with self-healing and lubricant capabilities. Polyvinyl alcohol (PVA) with β-cyclodextrin (β-CD) grafts (PVA-Cd) and 4-arm polyethylene glycol (PEG) with adamantane and quaternary ammonium compound (QAC) terminals (QA-PEG-Ad) were crosslinked through host-guest recognitions between adamantane and β-CD moieties to acquire PVEQ coatings. In response to bacterial infections, QACs exhibit reversible transformation between zwitterions (pH 7.4) and cationic lactones (pH 5.5) to generate on-demand bactericidal effect. Highly hydrophilic PEG/PVA backbones and zwitterionic QACs build a lubricate surface and decrease the friction coefficient 10 times compared with that of bare catheters. The antifouling hydrated layer significantly inhibits blood protein adsorption and platelet activation and reveals negligible hemolysis and cytotoxicity. The dynamic host-guest crosslinking achieves full self-healing of cracks in PVEQ hydrogels, and the mechanical profiles were recovered to over 90 % after rejuvenating the broken hydrogels, exhibiting a long-term stability after mechanical stretching, twisting, knotting and compression. After subcutaneous implantation and local bacterial infection, the retrieved PVEQ-coated catheters display no tissue adhesion and 3 log folds lower bacterial number than that of bare catheters. PVEQ coatings effectively prevent the repeated bacterial infections and there are few inflammatory reactions in the surrounding tissue, while substantial lymphoid infiltration and inflammatory cell aggregation occur in muscle tissues around the bare catheter. Thus, this study demonstrates a catheter coating strategy by on-demand bactericidal, self-adaptive antifouling, self-healing and lubricant hydrogels to address medical devices-related infections. STATEMENT OF SIGNIFICANCE: It is estimated over two billion peripheral intravenous catheters are annually used in hospitals around the world, and catheter-associated infection has become a great clinical challenge with rapidly rising morbidity and mortality. Surface coating is considered a promising approach, but substantial challenges remain in the development of coatings that simultaneously satisfy both anti-fouling and antibacterial attributes. Even more, few attempts have been made to design mechanically robust coatings and reversible antibacterial or antifouling capabilities, which are critical for long-term medical implants. To address these challenges, we propose a concise strategy to develop hydrogel coatings from commercially available poly(ethylene glycol) and polyvinyl alcohol. In addition to self-healing and lubricant capabilities, the reversible conversion between zwitterionic and cationic lactones of quaternary ammonium compounds enables on-demand bactericidal and self-adaptive antifouling effects.

Mucus Mimic Hydrogel Coating for Lubricous, Antibiofouling, and Anti-Inflammatory Urinary Catheters

Silicone is a common elastomer used in indwelling urinary catheters, and catheters are widely used in various medical applications due to their exceptional biocompatibility, hypoallergenic properties, and flexibility. However, silicones exhibit hydrophobic characteristics, lack inherent biolubrication, and are susceptible to nonspecific biosubstance adsorption, resulting in complications including but not limited to tissue trauma, postoperative pain, and urinary tract infections (UTIs). The development of effective surface designs for biomedical catheters to mitigate invasive damage and UITs has been a longstanding challenge. Herein, we present a novel approach to prepare a mucus mimic hydrogel coating. A thin layer of hydrogel containing xylitol is fabricated via photopolymerization. The surface modification technique and the interface-initiated hydrogel polymerization method ensure robust interfacial coherence. The resultant coating exhibits a low friction coefficient (CoF ≈ 0.1) for urinary catheter applications. Benefiting from the hydration layer and the antifouling of the xylitol unit, the xylitol hydrogel-coated surfaces (pAAAMXA) demonstrate outstanding antibiofouling properties against proteins (98.9% reduction relative to pristine polydimethylsiloxane (PDMS)). Furthermore, the pAAAMXA shows general adhesion resistance against bacteria primarily responsible for UITs (Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), Methicillin-resistant strains of Staphylococcus aureus (MRSA), and Staphylococcus epidermidis (S. epidermidis)) without compromising biotoxicity (cell viability 98%). In vivo, catheters coated with the mucus mimic hydrogel displayed excellent biocompatibility, resistance to adhesion of bio substance, and anti-inflammatory characteristics. This work describes a promising alternative to conventional silicone catheters, offering potential for clinical interventional procedures with minimized complications.

Mixed-charge hyperbranched polymer nanoparticles with selective antibacterial action for fighting antimicrobial resistance

The escalating menace of antimicrobial resistance (AMR) presents a profound global threat to life and assets. However, the incapacity of metal ions/reactive oxygen species (ROS) or the indiscriminate intrinsic interaction of cationic groups to distinguish between bacteria and mammalian cells undermines the essential selectivity required in these nanomaterials for an ideal antimicrobial agent. Hence, we devised and synthesized a range of biocompatible mixed-charge hyperbranched polymer nanoparticles (MCHPNs) incorporating cationic, anionic, and neutral alkyl groups to effectively combat multidrug-resistant bacteria and mitigate AMR. This outcome stemmed from the structural, antibacterial activity, and biocompatibility analysis of seven MCHPNs, among which MCHPN7, with a ratio of cationic groups, anionic groups, and long alkyl chains at 27:59:14, emerged as the lead candidate. Importantly, owing to inherent differences in membrane potential among diverse species, alongside its nano-size (6 - 15 nm) and high hydrophilicity (Kow = 0.04), MCHPN7 exhibited exceptional selective bactericidal effects over mammalian cells (selectivity index > 564) in vitro and in vivo. By inducing physical membrane disruption, MCHPN7 effectively eradicated antibiotic-resistant bacteria and significantly delayed the emergence of bacterial resistance. Utilized as a coating, MCHPN7 endowed initially inert surfaces with the ability to impede biofilm formation and mitigate infection-related immune responses in mouse models. This research heralds the advent of biocompatible polymer nanoparticles and harbors significant implications in our ongoing combat against AMR. STATEMENT OF SIGNIFICANCE: The escalating prevalence of antimicrobial resistance (AMR) has been acknowledged as one of the most significant threats to global health. Therefore, a series of mixed-charge hyperbranched polymer nanoparticles (MCHPNs) with selective antibacterial action were designed and synthesized. Owing to inherent differences in membrane potential among diverse species and high hydrophilicity (Kow = 0.04), the optimal nanoparticles exhibited exceptional selective bactericidal effects over mammalian cells (selectivity index >564) and significantly delayed the emergence of bacterial resistance. Importantly, they endowed surfaces with the ability to impede biofilm formation and mitigate infection-related immune responses. Furthermore, the above findings focus on addressing the problem of AMR in Post-Pandemic, which will for sure attract attention from both academic and industry research.

Poly(phenylalanine) and poly(3,4-dihydroxy-L-phenylalanine): Promising biomedical materials for building stimuli-responsive nanocarriers

Cancer is a serious threat to human health because of its high annual mortality rate. It has attracted significant attention in healthcare, and identifying effective strategies for the treatment and relief of cancer pain requires urgency. Drug delivery systems (DDSs) offer the advantages of excellent efficacy, low cost, and low toxicity for targeting drugs to tumor sites. In recent decades, copolymer carriers based on poly(phenylalanine) (PPhe) and poly(3,4-dihydroxy-L-phenylalanine) (PDopa) have been extensively investigated owing to their good biocompatibility, biodegradability, and controllable stimulus responsiveness, which have resulted in DDSs with loading and targeted delivery capabilities. In this review, we introduce the synthesis of PPhe and PDopa, highlighting the latest proposed synthetic routes and comparing the differences in drug delivery between PPhe and PDopa. Subsequently, we summarize the various applications of PPhe and PDopa in nanoscale-targeted DDSs, providing a comprehensive analysis of the drug release behavior based on different stimulus-responsive carriers using these two materials. In the end, we discuss the challenges and prospects of polypeptide-based DDSs in the field of cancer therapy, aiming to promote their further development to meet the growing demands for treatment.

Genetically encoded biocompatible anti-coagulant protein-coated coronary artery stents drive endothelialization

In response to the critical demand for advancements in coronary artery stents, this study addresses the challenges associated with arterial recoil and restenosis post-angioplasty and the imperative to encourage rapid re-endothelialization for minimizing thrombosis risks. We employed an innovative approach inspired by mussel adhesion, incorporating placental anticoagulant protein (AnnexinV) on stent design. The introduction of a post-translationally modified catecholic amino acid L-3,4-dihydroxyphenylalanine (L-Dopa), mimicking mussel characteristics, allowed for effective surface modification of Stainless steel stents through genetic code engineering in AnnexinV (AnxDopa). The efficacy of AnxDopa was analyzed through microscale thermophoresis and flow cytometry, confirming AnxDopa's exceptional binding with phosphatidylserine and activated platelets. AnxDopa coated stainless steel demonstrates remarkable bio-, hemo-, and immuno-compatibility, preventing smooth muscle cell proliferation, platelet adhesion, and fibrin formation. It acts as an interface between the stent and biological fluid, which facilitates the anticoagulation and rapid endothelialization. Surface modification of SS verified through XPS analysis and contact angle measurement attests to the efficacy of AnxDopa mediated surface modification. The hydrophilic nature of the AnxDopa-coated surface enhanced the endothelialization through increased protein absorption. This approach represents a significant stride in developing coronary stents with improved biocompatibility and reduced restenosis risks, offering valuable contributions to scientific and clinical realms alike.

Fucoidan- and Ciprofloxacin-Doped Plasma-Activated Polymer Coatings on Biodegradable Zinc: Hemocompatibility and Drug Release

Blood-contacting medical devices such as biodegradable metallic bone implant materials are expected to show excellent hemocompatibility both in vitro and in vivo. Different approaches are being studied and used to modify biomaterial surfaces for enhanced biocompatibility and hemocompatibility. However, the composition of degradable biomaterial must address several drawbacks at once. Iron-reinforced zinc material was used as a metallic substrate with improved mechanical properties when compared with those of pure zinc. Poly(lactic) acid (PLA) or polyethylenimine (PEI) was selected as a polymeric matrix for further doping with antibiotic ciprofloxacin (CPR) and marine-sourced polysaccharide fucoidan (FU), which are known for their antibacterial and potential anticoagulant properties, respectively. Radiofrequency air plasma was employed to induce metallic/polymer-coated surface activation before further modification with FU/CPR. Sample surface morphology and composition were studied and evaluated (contact angle measurements, AFM, SEM, and FT-IR) along with the hemolysis ratio and platelet adhesion test. Successful doping of the polymer layer by FU/CRP was confirmed. While PEI induced severe hemolysis over 12%, the PLA-coated samples exhibited even lower hemolysis (∼2%) than uncoated samples while the uncoated samples showed the lowest platelet adhesion. Moreover, gradual antibiotic release from PLA determined by the electrochemical methods using screen-printed carbon electrodes was observed after 24, 48, and 72 h, making the PLA-coated zinc-based material an attractive candidate for biodegradable material design.

Biocompatible quaternary pullulan functionalized 2D MoS2 glycosheet-based non-leaching and infection-resistant coatings for indwelling medical implants

Medical implants are frequently used in medicine and reconstructive surgery to treat various pathological and anatomical conditions. However, over time, biofilm formation on the surface of these implants can cause recurrent infections and subsequent inflammatory responses in the host, resulting in tissue damage, necrosis, and re-hospitalization. To address these implant-associated infections, the best approach is to create antimicrobial coatings. Here, we report the fabrication of a biocompatible, non-leaching, and contact-based antibacterial coating for implants using quaternary pullulan functionalized MoS2 (MCP) glycosheets. The cationic MCP glycosheets were coated on the surfaces of polydopamine-modified stainless steel and polyvinyl fluoride substrates through a simple process of electrostatic interaction. The developed coating showed excellent antibacterial activity (>99.5%) against E. coli and S. aureus that remained stable over 30 days without leaching out of the substrates and retained its antibacterial activity. MCP-coated implants did not induce any acute or sub-chronic toxicity to mammalian cells, both in vitro and in vivo. Furthermore, MCP coating prevented S. aureus colonization on stainless steel implants in a mouse model of implant-associated infection. The MCP coating developed in this study represents a simple, safe, and effective antibacterial coating for preventing implant-associated infections.

Identification and Mechanism Elucidation of Anti-Inflammatory Peptides in Jinhua Ham: An Integrative In Silico and In Vitro Study

This study aimed to effectively identify anti-inflammatory peptides in Jinhua ham, a dry-cured meat product made from the hind legs of pigs by curing and fermenting processes, and elucidate their anti-inflammatory mechanism. The investigation involved a combination of chromatographic purification, in silico screening, and in vitro validation. The first peak of JHP (JHP-P1) was purified using two-part exchange chromatography, in which 3350 peptides were identified by nano-HPLC-MS/MS, among which QLEELKR and EAEERADIAESQVNKLR showed significant anti-inflammatory potential (prediction scores: 0.759 and 0.841). In molecular docking and in vitro RAW264.7 cell experiments, these peptides displayed a strong affinity for Toll-like receptor 4-myeloid differentiation-2 (TLR4-MD-2), specifically binding around Arg 380, Lys 475, His 401, Gln 423, Asp 426, etc. This binding inhibited TLR4 expression and prevented trimer formation about TLR4-MD-2 and lipopolysaccharide (LPS), strongly inhibiting the inflammatory cascade. JHP suppressed LPS-induced cytokine overproduction and partially inhibited the phosphorylation of proteins in the MAPK/NF-κB pathway. These results demonstrated that combining in silico methods (activity prediction and molecular docking) is an effective strategy for screening anti-inflammatory peptides. This study provided a theoretical basis for identifying more anti-inflammatory peptides and applying them in functional foods.

Surface Engineering of Central Venous Catheters via Combination of Antibacterial Endothelium-Mimicking Function and Fibrinolytic Activity for Combating Blood Stream Infection and Thrombosis

Long-term blood-contacting devices (e.g., central venous catheters, CVCs) still face the highest incidence of blood stream infection and thrombosis in clinical application. To effectively address these complications, this work reports a dual-functional surface engineering strategy for CVCs by organic integration of endothelium-mimicking and fibrinolytic functions. In this proposal, a lysine (Lys)/Cu2+ -incorporated zwitterionic polymer coating (defined as PDA/Lys/Cu-SB) is designed and robustly fabricated onto commercial CVCs using a facile two-step process. Initially, adhesive ene-functionalized dopamine is covalently reacted with Lys and simultaneously coordinated with bactericidal Cu2+ ions, leading to the deposition of a PDA/Lys/Cu coating on CVCs through mussel foot protein inspired surface chemistry. Next, zwitterionic poly(sulfobetaine methacrylate) (pSB) brushes are grafted onto the PDA/Lys/Cu coating to endow lubricant and antifouling properties. In the final PDA/Lys/Cu-SB coating, endothelium-mimicking function is achieved by combining the catalytic generation of nitric oxide from the chelated Cu2+ with antifouling pSB brushes, which led to significant prevention of thrombosis, and bacterial infection in vivo. Furthermore, the immobilized Lys with fibrinolytic activity show remarkably enhanced long-term anti-thrombogenic properties as evidenced in vivo by demonstrating the capability to lyse nascent clots. Therefore, this developed strategy provides a promising solution for long-term blood-contacting devices to combat thrombosis and infection.

A robust mixed-charge zwitterionic polyurethane coating integrated with antibacterial and anticoagulant functions for interventional blood-contacting devices

Antifouling coatings based on zwitterionic polymers have been widely applied for surface modification of interventional blood-contacting devices to combat thrombosis and infection. However, the weak adhesion stability of the zwitterionic coating to the device surface is still the key challenge. In this work, biocompatible mixed-charge zwitterionic polyurethane (MPU) polymers, that bear equal amounts of cationic quaternary amine groups and anionic carboxyl groups, were developed and further uniformly dip-coated onto a thermoplastic polyurethane (TPU) substrate with a commercial aliphatic isocyanate cross-linker (AIC). During the curing process, AIC not only crosslinks MPU chains into a polymer network but also reacts with hydroxyl groups of TPU to interlink the polymer network to the substrate, resulting in a cross-linking reinforced MPU coating (CMPU) with excellent mechanical robustness and adhesion strength. Taking advantage of the mixed-charge feature, the final zwitterionic CMPU coating exhibits both excellent antifouling and antibacterial activities against protein adsorption and bacterial growth, respectively, which is beneficial for effectively inhibiting the occurrence of in vivo infection. Moreover, anticoagulation studies show that CMPU-coated TPU catheters can also prevent the formation of blood clots in ex vivo rabbit blood circuits without anticoagulants. Hence, the designed CMPU coating has immense potential to address thrombosis and infection for interventional blood-contacting devices.

Brush Polymer Coatings with Hydrophilic Main-Chains for Improving Surface Antibacterial Properties

Polymer coatings with improved surface antibacterial properties are of great importance for the application and development of implantable medical devices. Herein, we report the design, preparation, and antibacterial properties of a series of brush polymers (Dex-KEs) with hydrophilic dextran main-chains and mixed-charge polypeptide (KE) side-chains. Dex-KEs showed higher bactericidal activity and antifouling and antibiofilm properties than maleic acid modified dextran (Dex-Ma), KE, Dex-Ma/KE blend coatings, and brush polymer coatings with hydrophobic main-chains (AcDex-KEs). They also showed negligible in vitro cytotoxicity toward different mammalian cells and good in vivo biocompatibility. Dex-KE-coated implants exhibited potent in vivo resistance to bacterial infection before or after implantation.

Felix D, Yeh HH, Luo HD, Moskalev I, Wang Q, Wang R, Grecov D, Fazli L, Lange D, Kizhakkedathu JN. Robust Nanoparticle-Derived Lubricious Antibiofilm Coating for Difficult-to-Coat Medical Devices with Intricate Geometry

A major medical device-associated complication is the biofilm-related infection post-implantation. One promising approach to prevent this is to coat already commercialized medical devices with effective antibiofilm materials. However, developing a robust high-performance antibiofilm coating on devices with a nonflat geometry remains unmet. Here, we report the development of a facile scalable nanoparticle-based antibiofilm silver composite coating with long-term activity applicable to virtually any objects including difficult-to-coat commercially available medical devices utilizing a catecholic organic-aqueous mixture. Using a screening approach, we have identified a combination of the organic-aqueous buffer mixture which alters polycatecholamine synthesis, nanoparticle formation, and stabilization, resulting in controlled deposition of in situ formed composite silver nanoparticles in the presence of an ultra-high-molecular-weight hydrophilic polymer on diverse objects irrespective of its geometry and chemistry. Methanol-mediated synthesis of polymer-silver composite nanoparticles resulted in a biocompatible lubricious coating with high mechanical durability, long-term silver release (∼90 days), complete inhibition of bacterial adhesion, and excellent killing activity against a diverse range of bacteria over the long term. Coated catheters retained their excellent activity even after exposure to harsh mechanical challenges (rubbing, twisting, and stretching) and storage conditions (>3 months stirring in water). We confirmed its excellent bacteria-killing efficacy (>99.999%) against difficult-to-kill bacteria (Proteus mirabilis) and high biocompatibility using percutaneous catheter infection mice and subcutaneous implant rat models, respectively, in vivo. The developed coating approach opens a new avenue to transform clinically used medical devices (e.g., urinary catheters) to highly infection-resistant devices to prevent and treat implant/device-associated infections.

Regulable Polyelectrolyte-Surfactant Complex for Antibacterial Biomedical Catheter Coating via a Readily Scalable Route

Constructing multifunctional surfaces is one of the practical approaches to address catheter-related multiple complications but is generally time-consuming and substrate-dependent. Herein, a novel anti-adhesion, antibacterial, low friction, and robustness coating on medical catheters are developed via a universal and readily scalable method based on a regulable polyelectrolyte surfactant complex. The complex is rapidly assembled in one step by electrostatic and hydrophobic interactions between organosilicon quaternary ammonium surfactant (N⁺ _Si ) and adjustable polyelectrolyte with cross-linkable, anti-adhesive, and anionic groups. The alcohol-soluble feature of the complex is conducive to the rapid formation of coatings on any medical device with arbitrary shapes via dip coating. Different from the conventional polyelectrolyte-surfactant complex coating, the regulated complex coating with nonleaching mode could be stable in harsh conditions (high concentration salt solution, organic reagents, etc.) because of the cross-linked structure while improving the biocompatibility and reducing the adhesion of various bacteria, proteins, and blood cells. The coated catheter exhibits good antibacterial infection in vitro and in vivo, owing to the synergistic effect of N⁺ _Si and zwitterionic groups. Therefore, the rationally designed complex supplies a facile coating approach for the potential development in combating multiple complications of the medical catheter.

Antibacterial brush polypeptide coatings with anionic backbones

Preventing initial colonization of bacteria on biomaterial surfaces is crucial to address the medical device-associated infection issues. Antimicrobial peptide (AMP) or cationic polymer modified surfaces have shown promising potentials to inhibit the initial colonization of bacteria by contact killing. However, their development has been impeded because of bacterial adhesion and high cytotoxicity. Herein, we report a series of brush polypeptide coatings with anionic backbones and cationic AMP mimetic side-chains that displayed superior bactericidal activity, antibacterial adhesion property, and biocompatibility. The cationic side-chain density played an important role in the bioactivities of the brush polypeptide modified surfaces. Brush polypeptide coating with low side-chain density exhibited improved bactericidal activity and antibacterial adhesion property, ascribing to the cooperative effects of adjacent side-chains and backbones/side-chains, respectively. It also showed negligible hemolysis/cytotoxicity in vitro and potent anti-infection property (≥99.9% bactericidal efficacy) in vivo. Brush polymers with anionic backbones and cationic side-chains can be used as a promising design motif to potentiate both antibacterial property and biocompatibility of coatings for combating device-associated infections. STATEMENT OF SIGNIFICANCE: Device-associated infections (DAIs) have led to increased medical cost, pain, and even mortality of patients. Antimicrobial peptide and cationic polymer coatings provide an important strategy to combat DAIs by preventing initial colonization of bacteria on biomaterial surfaces. Nevertheless, they have suffered bacterial adhesion and cytotoxicity issues. Herein, we developed a brush polypeptide coating with anionic backbones and cationic side-chains. The brush polypeptide coating showed superior bactericidal and antibacterial adhesion properties outperforming conventional antibacterial coatings based on antimicrobial peptide (i.e., melittin), lysozyme (i.e., lysostaphin), cationic polymer, anionic polymer, and the blends of cationic/anionic polymers. It also showed good biocompatibility and potent anti-infection property, making it a promising candidate to combat the DAIs.

"Self-Defensive" Antifouling Zwitterionic Hydrogel Coatings on Polymeric Substrates

In biomedicine fields, biofouling can easily occur on devices such as sensors and catheters, causing some iatrogenic infections, which menace the lives and health of patients greatly. Therefore, it is of great significance to solve the problems of bacterial infection on the surfaces of medical devices. In this paper, "self-defensive" and antifouling zwitterionic hydrogel coatings were prepared by network interpenetration of the hydrogel and the polymeric substrates. The zwitterionic polysulfobetaine methacrylate (PSBMA) hydrogel coatings resisted most of the bacteria to adhere on the substrates. When a few bacteria were lucky to escape the antifouling defense and adhered to the coatings, gentamicin sulfate (GS) would be released under the trigger of a weakly acidic environment caused by bacterial metabolism to kill these bacteria. Simultaneously, the coatings of the bacteria-adhering sites would be degraded by hyaluronidase secreted by these bacteria and peeled off to remove the bacteria and renew the antifouling surfaces. The antifouling properties and mechanism of the self-defensive behavior of the hydrogel coatings on polymeric substrates were investigated. Furthermore, the in vitro and in vivo antibacterial performances, as well as the biocompatibility of the coatings, were demonstrated. The results suggested that the self-defensive antifouling zwitterionic hydrogel coatings hold great potential to be used on the surfaces of polymeric medical devices.

Impact of Charge Composition and Distribution on the Antibacterial Properties of Polypeptide Coatings

Inspired by the charge composition and distribution of proteins and peptides, we designed and prepared a series of brush polypeptides with positive and negative charges separately distributed in the side chains and the backbones. The brush polypeptides can self- or co-deposit on various substrates forming ultrathin and stable coatings. They showed potent bactericidal activity and antibiofilm property, outperforming conventional linear polypeptide coatings with randomly distributed positive and negative charges. Keeping the balance of positive/negative charges and increasing the numbers of positive/negative charges can further improve the antibacterial property of brush polypeptide coatings without sacrificing their biocompatibility.

Targeted Anti-Biofilm Therapy: Dissecting Targets in the Biofilm Life Cycle

Biofilm is a crucial virulence factor for microorganisms that causes chronic infection. After biofilm formation, the bacteria present improve drug tolerance and multifactorial defense mechanisms, which impose significant challenges for the use of antimicrobials. This indicates the urgent need for new targeted technologies and emerging therapeutic strategies. In this review, we focus on the current biofilm-targeting strategies and those under development, including targeting persistent cells, quorum quenching, and phage therapy. We emphasize biofilm-targeting technologies that are supported by blocking the biofilm life cycle, providing a theoretical basis for design of targeting technology that disrupts the biofilm and promotes practical application of antibacterial materials.

Zwitterionic Polypeptoids: A Promising Class of Antifouling Bioinspired Materials

Biofouling caused by protein adsorption and microbial colonization remains a great challenge in many applications. In this work, we synthesized a new type of zwitterionic polypeptoid containing carboxybetaine (CB) moieties (PeptoidCB) through thiol-ene chemistry of poly(N-allylglycine) (PNAG). The zwitterionic antifouling hydrogel was subsequently prepared by co-mixing PeptoidCB with agarose, which exhibited excellent resistance to non-specific protein adsorption and bacterial adhesion. Further, PeptoidCB-modified block copolypeptoids with amphiphilic structure were synthesized to form nanoparticles in an aqueous solution with neglected protein adsorption. The ability of PeptoidCB to resist non-specific protein adsorption and bacterial adhesion makes it a promising candidate for biomedical and industrial applications.

Imidazolium-Based Polypeptide Coating with a Synergistic Antibacterial Effect and a Biofilm-Responsive Property

Surface modification with cationic polymer coatings represented an important strategy to address the medical device-related infection issues. However, limited antibacterial activities and high cytotoxicity have hampered their development. Herein, we report a facile method to enhance the surface antibacterial activity by construction of an imidazolium-based polypeptide with fosfomycin counteranions (i.e., S₄-PIL-FS). The polypeptide coating displayed a synergistic antibacterial effect from the combination of membrane disruption and inhibition of initial cell wall synthesis, leading to higher in vitro and in vivo surface antibacterial activities than cationic polypeptide or fosfomycin sodium alone. S₄-PIL-FS also showed a decrease in the hemolytic ratio and cytotoxicity toward different mammalian cells. Moreover, we observed an interesting biofilm-responsive property of S₄-PIL-FS originating from the esterase-induced cleavages of side-chain ester bonds that enabled an antibiofilm property of the cationic polypeptide coating.

Single-Chain Nanoparticle-Based Coatings with Improved Bactericidal Activity and Antifouling Properties

Dual-function antibacterial surfaces have exhibited promising potential in addressing implant-associated infections. However, both bactericidal and antifouling properties need to be further improved prior to practical uses. Herein, we report the preparation and properties of a linear block copolymer coating (LP-KF) and a single-chain nanoparticle coating (NP-KF) with poly(ethylene glycol) (PEG) and cationic polypeptide segments. NP-KF with cyclic PEG segments and densely charged polypeptide segments was expected to display improved bactericidal and antifouling properties. LP-KF was prepared by the combination of ring-opening polymerization of N-carboxyanhydride (NCA) monomers and subsequent deprotection. NP-KF was prepared by intramolecular cross-linking of LP-KF in diluted solutions. Both LP-KF- and NP-KF-coated PDMS surfaces were prepared by dipping with polydopamine-coated surfaces. They showed superior in vitro bactericidal activity against both Staphylococcus aureus and Escherichia coli with >99.9% killing efficacy, excellent protein adsorption resistance, antibacterial adhesion, and low cytotoxicity. The NP-KF coating showed higher bactericidal activity and antifouling properties than its linear counterpart. It also showed significant anti-infective property and histocompatibility in vivo, which makes it a good candidate for implants and biomedical device applications.

A sulfonate-based polypeptide toward infection-resistant coatings

Multifunctional coatings have gained significant attention for their promising potential to address the issue of medical device-related infections. However, they usually have multiple components in one layer which decreases the density of functional groups on surfaces and hence reduces the biological properties. Herein, we report a mono-component and sulfonate-based anionic polypeptide coating with on-demand antibacterial activity, antifouling property, and biocompatibility. The anionic polypeptide was prepared by ring-opening polymerization of L-cysteine-based N-carboxyanhydride (NCA) with allyl groups and a subsequent thiol-ene reaction to incorporate the sulfonate pendants. It adopted a 17.1-19.5% β-sheet conformation and self-assembled into a spherical nanoparticle. The polypeptide coating showed excellent in vitro antibacterial activity against both Gram-positive (i.e., S. aureus) and Gram-negative bacteria (i.e., E. coli) with >99% killing efficacy after acidic solution treatment and prominent antifouling property and biocompatibility after weak base treatment. An in vivo study revealed that the sulfonate-based polypeptide-coated polydimethylsiloxane (PDMS) exhibited good anti-infection property and histocompatibility.

A tailored extracellular matrix (ECM) - Mimetic coating for cardiovascular stents by stepwise assembly of hyaluronic acid and recombinant human type III collagen

Collagen, a central component of the extracellular matrix (ECM), has been widely applied in tissue engineering, among others, for wound healing or bone and nerve regeneration. However, the inherent thrombogenic properties of collagen hinder the application in blood-contacting devices. Herein, a brand-new recombinant human type III collagen (hCOLIII) was explored that does not present binding sites for platelets while retaining the affinity for endothelial cells. The hCOLIII together with hyaluronic acid (HA) were deposited on the substrates via layer-by-layer assembly to form an ECM-mimetic multilayer coating. In vitro platelet adhesion and ex vivo blood circulation tests demonstrated prominent thromboprotective properties for the hCOLIII-based ECM-mimetic coating. In addition, the coating effectively guided the vascular cell fate by supporting the proliferation of endothelial cells and inhibiting the proliferation of smooth muscle cells by differentiating them to a more contractile phenotype. A polylactic acid (PLA) stent coated with hCOLIII-based ECM-mimetic coating was implanted in the abdominal aorta of rabbits to investigate the healing of the neointima. The enhanced endothelialization, suppressed inflammatory response, inhibition of excessive neointimal hyperplasia, and the superior thromboprotection strongly indicated the prospect of the hCOLIII-based ECM-mimetic coating as a tailored blood-contacting material for cardiovascular stents.

Biological sealing and integration of a fibrinogen-modified titanium alloy with soft and hard tissues in a rat model

Percutaneous or transcutaneous devices are important and unique, and the corresponding biological sealing at the skin-implant interface is the key to their long-term success. Herein, we investigated the surface modification to enhance biological sealing, using a metal sheet and screw bonded by biomacromolecule fibrinogen mediated via pre-deposited synthetic macromolecule polydopamine (PDA) as a demonstration. We examined the effects of a Ti-6Al-4V titanium alloy modified with fibrinogen (Ti-Fg), PDA (Ti-PDA) or their combination (Ti-PDA-Fg) on the biological sealing and integration with skin and bone tissues. Human epidermal keratinocytes (HaCaT), human foreskin fibroblasts (HFF) and preosteoblasts (MC3T3-E1), which are closely related to percutaneous implants, exhibited better adhesion and spreading on all the three modified sheets compared with the unmodified alloy. After three-week subcutaneous implantation in Sprague-Dawley (SD) rats, the Ti-PDA-Fg sheets could significantly attenuate the soft tissue response and promote angiogenesis compared with other groups. Furthermore, in the model of percutaneous tibial implantation in SD rats, the Ti-PDA-Fg screws dramatically inhibited epithelial downgrowth and promoted new bone formation. Hence, the covalent immobilization of fibrinogen through the precoating of PDA is promising for enhanced biological sealing and osseointegration of metal implants with soft and hard tissues, which is critical for an orthopedic percutaneous medical device.

Poly(α-l-lysine)-based nanomaterials for versatile biomedical applications: Current advances and perspectives

Poly(α-l-lysine) (PLL) is a class of water-soluble, cationic biopolymer composed of α-l-lysine structural units. The previous decade witnessed tremendous progress in the synthesis and biomedical applications of PLL and its composites. PLL-based polymers and copolymers, till date, have been extensively explored in the contexts such as antibacterial agents, gene/drug/protein delivery systems, bio-sensing, bio-imaging, and tissue engineering. This review aims to summarize the recent advances in PLL-based nanomaterials in these biomedical fields over the last decade. The review first describes the synthesis of PLL and its derivatives, followed by the main text of their recent biomedical applications and translational studies. Finally, the challenges and perspectives of PLL-based nanomaterials in biomedical fields are addressed.

Mussel patterned with 4D biodegrading elastomer durably recruits regenerative macrophages to promote regeneration of craniofacial bone

Crosstalk between bone marrow mesenchymal stem cells (BMSCs) and macrophages plays vital role in bone healing. By investigating the mechanism of collagen membrane-guided bone regeneration, we found compact structure and rapid membrane degradation compromised the duration of M2 macrophages influx, which restricts the recruitment of BMSCs that is essential for bone healing. To tackle this issue, a biodegrading elastomeric compound consisting of poly(glycerol sebacate) (PGS) and polycaprolactone (PCL) was fabricated into hierarchically porous membrane. The rational design of 3D microstructure enabled sufficient polydopamine (PDA) coating. Without any addition of growth factors, the 3D-patterned PDA membrane enables early and durable influx of M2 macrophages, which in turn promotes BMSCs recruitment and osteogenic differentiation. Furthermore, 4D-morphing of the membrane fully regenerates the dome shaped calvarial bone as well as arc-shape bone in peri-implant alveolar defect without filling xenogenous substitute. This study revealed the superiority of 3D printed microstructures in immunomodulatory materials. The availability of 4D-morphing for PGS/PCL construct expanded their advantages in reconstructing craniofacial bone.

Favorable Antibacterial, Antibiofilm, Antiadhesion to Cells, and Biocompatible Polyurethane by Facile Surface Functionalization

It is of paramount importance to prohibit biofilm formation in a wide range of implant devices, such as thermoplastic polyurethane (PU)-based catheters. It is possible only by means of a multifunctional material that provides fast and effective antibacterial activity, proper biocompatibility, and low bacterial and cell adhesion. In this paper, a facile chemistry approach has been developed to modify biomedical-grade PU with PU species, containing reactive uretdione functional groups for functionalization with the contact-type polyguanidine bactericidal agent and oxidized dextran as an antifouling polymer without sacrificing the thermal and mechanical properties. The resulting PU possesses broad-spectrum contact-active antibacterial activity against Gram-negative and Gram-positive bacteria with fast kinetics. The excellent antifouling capacity was confirmed by low nonspecific protein adsorption and reduced adhesion of fibroblast cells by ≥ 90%. In addition to antiadhesive and antibiofilm properties, high cell viability (>90%) and low hemolysis rate (HR < 1%) verified favorable cytocompatibility. Hence, the strategy followed to functionalize PUs in this paper might be considered to modify PU-based biomedical devices.

The recent advances in surface antibacterial strategies for biomedical catheters

As one of the most common hospital-acquired infections, catheter-related infections (CRIs) which are caused by microbial colonization lead to increasing morbidity and mortality of patients and life threat for medical staffs. In this case, a variety of efforts have been made to design functional materials to limit bacterial colonization and biofilm formation. In this review, we focus on the recent advances in surface modification strategies of biomedical catheters used to prevent CRIs. The tests for the evaluation of the performances of modified catheters are listed. Future prospects of surface antibacterial strategies for biomedical catheters are also outlined.

Universal Intraductal Surface Antifouling Coating Based on an Amphiphilic Copolymer

Surface modification on the inner wall of medical or industrial polymeric catheters with a high length/diameter ratio is highly desired. Herein, a universal and facile method based on an amphiphilic copolymer was developed to immobilize an intraductal surface antifouling coating for a variety of polymeric catheters. A fouling-repelled thin layer was formed by swelling-driven adsorption via directly perfusing an amphiphilic copolymer [polyvinylpyrrolidone-polydimethylsiloxane-polyvinylpyrrolidone (PVP-PDMS-PVP)] solution into catheters. In this copolymer, hydrophobic PDMS was embedded into a shrinking cross-linked network of catheters; also, PVP segments migrated to the surface under driving water to form a hydrophilic antifouling coating. Moreover, because of the coordination between I₂ and pyrrolidone of PVP, the copolymer-modified intraductal surface was then infused with aqueous I₂ to form the PVP-I₂ complex, endowing this coating with bactericidal activity. Notably, diverse catheters with arbitrary shapes (circular, rectangular, triangular, and hexagonal) and different components (silicone, polyurethane, and polyethylene) were also verified to work using this interfacial interpenetration strategy. The findings in this work provide a new avenue toward facile and universal fabrication of intraductal surface antifouling catheters, creating a superior option for decreasing the consumable costs in industrial production and alleviating the pain of replacing catheters for patients.

Impact of DMPEI on Biofilm Adhesion on Latex Urinary Catheter

BACKGROUND

Microorganisms can migrate from the external environment to the patient's organism through the insertion of catheters. Despite being indispensable medical device, the catheter surface can be colonized by microorganisms and become a starting point for biofilm formation. Therefore, new technologies are being developed in order to modify surfaces to prevent the adhesion and survival of microorganisms. Patents with the use of DMPEI have been filed.

OBJECTIVE

In the present work, we coated latex catheter surfaces with 2 mg mL-1 DMPEI in different solvents, evaluated the wettability of the surface and the anti- biofilm activity of the coated catheter against Escherichia coli, Staphylococcus aureus, and Candida albicans.

METHODS

We coated the inner and outer catheter surfaces with 2 mg mL-1 of DMPEI solubilized in butanol, dimethylformamide, and cyclohexanone and the surfaces were analyzed visually. Contact angle measurement allowed the analysis of the wettability of the surfaces. The CFU mL-1 count evaluated E. coli, S. aureus, and C. albicans adhesion onto the control and treated surfaces.

RESULTS

The contact angle decreased from 50.48º to 46.93º on the inner surface and from 55.83º to 50.91º on the outer surface of latex catheters coated with DMPEI. The catheter coated with DMPEI showed anti-biofilm activity of 83%, 88%, and 93% on the inner surface and 100%, 92%, and 86% on the outer surface for E. coli, S. aureus, and C. albicans, respectively.

CONCLUSION

Latex catheter coated with DMPEI efficiently impaired the biofilm formation both on the outer and inner surfaces, showing a potential antimicrobial activity along with a high anti-biofilm activity for medical devices.

Facile Synthesis of Imidazolium-Based Block Copolypeptides with Excellent Antimicrobial Activity

Antimicrobial polypeptides are promising mimics of antimicrobial peptides (AMPs) with low risks of antimicrobial resistance (AMR). Polypeptides with facile and efficient production, high antimicrobial activity, and low toxicity toward mammalian cells are highly desirable for practical applications. Herein, triblock copolypeptides with chloro groups (PPG_n-PCPBLG_m) and different main-chain lengths were synthesized via an ultrafast ring-opening polymerization (ROP) using a macroinitiator, namely poly(propylene glycol) bis(2-aminopropyl ether), and purified or nonpurified monomer (i.e., CPBLG-NCA). PPG_n-PCPBLG_m with 90 amino acid residues can be readily prepared within 300 s. Imidazolium-based block copolypeptides (PPG_n-PIL_m) were facilely prepared via nucleophilic substitution of PPG_n-PCPBLG_m with NaN₃ and subsequent "click" chemistry. α-Helical PPG_n-PIL_m can self-assemble into nanostructured and cationic micelles which displayed highly potent antimicrobial activity and low hemolysis. The top-performing material, namely PPG₃₄-PIL₇₀, showed low minimum inhibitory concentration (MIC) against both Gram-positive S. aureus and Gram-negative E. coli (25 μg mL^-1). It also displayed low toxicity against mouse embryonic fibroblast (NIH 3T3) and human embryonic kidney (293T) cells at 2× MIC.

Efficient synthesis and excellent antimicrobial activity of star-shaped cationic polypeptides with improved biocompatibility

Antimicrobial peptides (AMPs) have been considered as a promising new tool to combat the antimicrobial resistance (AMR) crisis. However, the high toxicity and high cost of AMPs hampered their further development. Herein, a series of star poly(_L-lysine) (PLL) homo- and copolymers with excellent antimicrobial activity and improved biocompatibility were prepared by the combination of ultra-fast ring opening polymerization (ROP) and side-chain modification. The amine-terminated polyamidoamine dendrimer (Gx-PAMAM) mediated ROP of Nε-tert-butyloxycarbonyl-_L-lysine N-carboxyanhydride (Boc-_L-Lys-NCA) and γ-benzyl-_L-glutamic acid-based N-carboxyanhydride (PBLG-NCA) was able to prepare star PLL homo- and copolymers with 400 residues within 50 min. While the star PLL homopolymers exhibited low minimum inhibitory concentration (MIC = 50-200 μg mL^-1) against both Gram-positive and Gram-negative bacteria (i.e., S. aureus and E. coli), they showed high toxicity against various mammalian cell lines. The star PLL copolymers with low contents of hydrophobic and hydroxyl groups showed enhanced antimicrobial activity (MIC = 25-50 μg mL^-1) and improved mammalian cell viability. Both SEM and CLSM results indicated the antimicrobial mechanism of membrane disruption.

Analysis of Risk Factors and Clinical Indicators in Bloodstream Infections Among Patients with Hematological Malignancy

Purpose

The incidence of bloodstream infection (BSI) is more common in patients with hematological malignancy. It is important to distinguish infectious episodes from noninfectious episodes. The present study was aimed to describe the epidemiology, clinical indexes, and antibiotic use for in-hospital bloodstream infections of hematological malignancy patients.

Patients and Methods

Single-center retrospective research was performed on hematological malignancy patients admitted to our hospital from July 2015 to March 2018. Laboratory and clinical information from 322 febrile patients were acquired. These episodes were divided by blood culture results into two groups: 1) blood culture positive-group, 2) blood culture negative-group.

Results

In the 322 febrile cases, 81 (25.2%) patients were blood culture positive, and among them, Gram-negative (G-) bacteria (51.9%) were more isolated than Gram-positive (G+) bacteria (32.1%) and fungi (7.4%). Gram-negative bacteria were more likely to have drug resistance than G+ bacteria. Independent risk factors revealed that patients with complications, high levels of procalcitonin (PCT), glucose, interleukin-6 (IL-6), and d-dimer (D-D), and low concentration of albumin were correlated with the occurrence of BSI. PCT, IL-6 and D-D performed well in differentiating the positive group from the negative group. Moreover, IL-6 and D-D showed excellent performance in differentiating G- and G+ groups, with the areas under the curve all above 0.8.

Conclusion

We analyzed the risk factors for BSI in patients with hematological malignancy, the distribution of bacteria, antibiotic resistance, and the changes in clinical parameters. This single-center retrospective study may provide clinicians insight into the diagnosis and treatment of BSI.

3D printing of tissue engineering scaffolds: a focus on vascular regeneration

Tissue engineering is an emerging means for resolving the problems of tissue repair and organ replacement in regenerative medicine. Insufficient supply of nutrients and oxygen to cells in large-scale tissues has led to the demand to prepare blood vessels. Scaffold-based tissue engineering approaches are effective methods to form new blood vessel tissues. The demand for blood vessels prompts systematic research on fabrication strategies of vascular scaffolds for tissue engineering. Recent advances in 3D printing have facilitated fabrication of vascular scaffolds, contributing to broad prospects for tissue vascularization. This review presents state of the art on modeling methods, print materials and preparation processes for fabrication of vascular scaffolds, and discusses the advantages and application fields of each method. Specially, significance and importance of scaffold-based tissue engineering for vascular regeneration are emphasized. Print materials and preparation processes are discussed in detail. And a focus is placed on preparation processes based on 3D printing technologies and traditional manufacturing technologies including casting, electrospinning, and Lego-like construction. And related studies are exemplified. Transformation of vascular scaffolds to clinical application is discussed. Also, four trends of 3D printing of tissue engineering vascular scaffolds are presented, including machine learning, near-infrared photopolymerization, 4D printing, and combination of self-assembly and 3D printing-based methods.

Antimicrobial and degradable triazolinedione (TAD) crosslinked polypeptide hydrogels

Hydrogels are perfectly suited to support cell and tissue growth in advanced tissue engineering applications as well as classical wound treatment scenarios. Ideal hydrogel materials for these applications should be easy to produce, biocompatible, resorbable and antimicrobial. Here we report the fabrication of degradable covalent antimicrobial lysine and tryptophan containing copolypeptide hydrogels, whereby the hydrogel properties can be independently modulated by the copolypeptide monomer ratio and chiral composition. Well-defined statistical copolypeptides comprising different overall molecular weights as well as ratios of l- and d-lysine and tryptophan at ratios of 35 : 15, 70 : 30 and 80 : 20 were obtained by N-carboxyanhydride (NCA) polymerisation and subsequently crosslinked by the selective reaction of bifunctional triazolinedione (TAD) with tryptophan. Real-time rheology was used to monitor the crosslinking reaction recording the fastest increase and overall modulus for copolypeptides with the higher tryptophan ratio. Water uptake of cylindrical hydrogel samples was dependent on crosslinking ratio but found independent of chiral composition, while enzymatic degradation proceeded significantly faster for samples containing more l-amino acids. Antimicrobial activity on a range of hydrogels containing different polypeptide chain lengths, lysine/tryptophan composition and l/d enantiomers was tested against reference laboratory strains of Gram-negative Escherichia coli (E. coli; ATCC25922) and Gram-positive, Staphylococcus aureus (S. aureus; ATCC25923). log reductions of 2.8-3.4 were recorded for the most potent hydrogels. In vitro leachable cytotoxicity tests confirmed non-cytotoxicity as per ISO guidelines.

Surface Engineering of Cardiovascular Devices for Improved Hemocompatibility and Rapid Endothelialization

Cardiovascular devices have been widely applied in the clinical treatment of cardiovascular diseases. However, poor hemocompatibility and slow endothelialization on their surface still exist. Numerous surface engineering strategies have mainly sought to modify the device surface through physical, chemical, and biological approaches to improve surface hemocompatibility and endothelialization. The alteration of physical characteristics and pattern topographies brings some hopeful outcomes and plays a notable role in this respect. The chemical and biological approaches can provide potential signs of success in the endothelialization of vascular device surfaces. They usually involve therapeutic drugs, specific peptides, adhesive proteins, antibodies, growth factors and nitric oxide (NO) donors. The gene engineering can enhance the proliferation, growth, and migration of vascular cells, thus boosting the endothelialization. In this review, the surface engineering strategies are highlighted and summarized to improve hemocompatibility and rapid endothelialization on the cardiovascular devices. The potential outlook is also briefly discussed to help guide endothelialization strategies and inspire further innovations. It is hoped that this review can assist with the surface engineering of cardiovascular devices and promote future advancements in this emerging research field.

Bioinspired liquid gating membrane-based catheter with anticoagulation and positionally drug release properties

Catheters are indispensable medical devices that are extensively used in daily medical treatment. However, existing catheter materials continue to encounter many problems, such as thrombosis, single functionality, and inadaptability to environmental changes. Inspired by blood vessels, we develop a self-adaptive liquid gating membrane-based catheter with anticoagulation and positionally drug release properties. Our multifunctional liquid gating membrane-based catheter significantly attenuates blood clot formation and can be used as a general catheter design strategy to offer various drugs positionally releasing applications to comprehensively enhance the safety, functionality, and performance of medical catheters' materials.

Functionalized biomaterials to combat biofilms

Pathogenic microbial biofilms that readily form on implantable medical devices or human tissues have posed a great threat to worldwide healthcare. Hopes are focused on preventive strategies towards biofilms, leaving a thought-provoking question: how to tackle the problem of established biofilms? In this review, we briefly summarize the functionalized biomaterials to combat biofilms and highlight current approaches to eradicate pre-existing biofilms. We believe that all of these strategies, alone or in combination, could represent a blueprint for fighting biofilm-associated infections in the postantibiotic era.

Long-Term Efficacy of Biodegradable Metal-Polymer Composite Stents After the First and the Second Implantations into Porcine Coronary Arteries

A biodegradable coronary stent is expected to eliminate the adverse events of an otherwise eternally implanting material after vessel remodeling. Both biocorrodible metals and biodegradable polymers have been tried as the matrix of the new-generation stent. Herein, we utilized a metal-polymer composite material to combine the advantages of the high mechanical strength of metals and the adjustable degradation rate of polymers to prepare the biodegradable stent. After coating polylactide (PLA) on the surface of iron, the degradation of iron was accelerated significantly owing to the decrease of local pH resulting from the hydrolysis of PLA, etc. We implanted the metal-polymer composite stent (MPS) into the porcine artery and examined its degradation in vivo, with the corresponding metal-based stent (MBS) as a control. Microcomputed tomography (micro-CT), coronary angiography (CA), and optical coherence tomography (OCT) were performed to observe the stents and vessels during the animal experiments. The MPS exhibited faster degradation than MBS, and the inflammatory response of MPS was acceptable 12 months after implantation. Additionally, we implanted another MPS after 1-year implantation of the first MPS to investigate the result of the MPS in the second implantation. The feasibility of the biodegradable MPS in second implantation in mammals was also confirmed.

Phosphorylcholine- and cation-bearing copolymer coating with superior antibiofilm and antithrombotic properties for blood-contacting devices

The phosphorylcholine- and cation-bering copolymer coating endowed the blood-contacting devices with superior antibiofilm and antithrombotic ability.