Environmentally Friendly and Biodegradable Ultrasensitive Piezoresistive Sensors for Wearable Electronics Applications

Celastrol reduces lung inflammation induced by multiwalled carbon nanotubes in mice via NF-κb-signaling pathway

Multiwalled carbon nanotubes (MWCNTs) have numerous applications in the field of carbon nanomaterials. However, the associated toxicity concerns have increased significantly because of their widespread use. The inhalation of MWCNTs can lead to nanoparticle deposition in the lung tissue, causing inflammation and health risks. In this study, celastrol, a natural plant medicine with potent anti-inflammatory properties, effectively reduced the number of inflammatory cells, including white blood cells, neutrophils, and lymphocytes, and levels of inflammatory cytokines, such as IL-1β, IL-6, and TNF-α, in mice lungs exposed to MWCNTs. Moreover, celastrol inhibited the activation of the NF-κB-signaling pathway. This study confirmed these findings by demonstrating comparable reductions in inflammation upon exposure to MWCNTs in mice with the deletion of NF-κB (P50-/-). These results indicate the utility of celastrol as a promising pharmacological agent for preventing MWCNT-induced lung tissue inflammation.

Recent Progress in Advanced Polyester Elastomers for Tissue Engineering and Bioelectronics

Polyester elastomers are highly flexible and elastic materials that have demonstrated considerable potential in various biomedical applications including cardiac, vascular, neural, and bone tissue engineering and bioelectronics. Polyesters are desirable candidates for future commercial implants due to their biocompatibility, biodegradability, tunable mechanical properties, and facile synthesis and fabrication methods. The incorporation of bioactive components further improves the therapeutic effects of polyester elastomers in biomedical applications. In this review, novel structural modification methods that contribute to outstanding mechanical behaviors of polyester elastomers are discussed. Recent advances in the application of polyester elastomers in tissue engineering and bioelectronics are outlined and analyzed. A prospective of the future research and development on polyester elastomers is also provided.

A review of medical wearables: materials, power sources, sensors, and manufacturing aspects of human wearable technologies

Wearable technology is a promising and revolutionary technology that is changing some aspects of our standard of living to a great extent, including health monitoring, sport and fitness, performance tracking, education, and entertainment. This article presents a comprehensive literature review of over 160 articles related to state-of-the-art human wearable technologies. We provide a thorough understanding of the materials, power sources, sensors, and manufacturing processes, and the relationships between these to capture opportunities for enhancement and challenges to overcome in wearables. As a result of our review, we have determined the need for the development of a comprehensive, robust manufacturing system alongside specific standards and regulations that take into account wearables' unique characteristics. Seeing the whole picture will provide a frame reference and road map for researchers and industries through the design, manufacturing, and commercialisation of effective, portable, self-powered, multi-sensing ultimate future wearable devices and create opportunities for new innovations and applications.

Advances in Biodegradable Electronic Skin: Material Progress and Recent Applications in Sensing, Robotics, and Human-Machine Interfaces

The rapid growth of the electronics industry and proliferation of electronic materials and telecommunications technologies has led to the release of a massive amount of untreated electronic waste (e-waste) into the environment. Consequently, catastrophic environmental damage at the microbiome level and serious human health diseases threaten the natural fate of the planet. Currently, the demand for wearable electronics for applications in personalized medicine, electronic skins (e-skins), and health monitoring is substantial and growing. Therefore, "green" characteristics such as biodegradability, self-healing, and biocompatibility ensure the future application of wearable electronics and e-skins in biomedical engineering and bioanalytical sciences. Leveraging the biodegradability, sustainability, and biocompatibility of natural materials will dramatically influence the fabrication of environmentally friendly e-skins and wearable electronics. Here, the molecular and structural characteristics of biological skins and artificial e-skins are discussed. The focus then turns to the biodegradable materials, including natural and synthetic-polymer-based materials, and their recent applications in the development of biodegradable e-skin in wearable sensors, robotics, and human-machine interfaces (HMIs). Finally, the main challenges and outlook regarding the preparation and application of biodegradable e-skins are critically discussed in a near-future scenario, which is expected to lead to the next generation of biodegradable e-skins.

Different methods of synthesizing poly(glycerol sebacate) (PGS): A review

Poly(glycerol sebacate) (PGS) is a biodegradable elastomer that has attracted increasing attention as a potential material for applications in biological tissue engineering. The conventional method of synthesis, first described in 2002, is based on the polycondensation of glycerol and sebacic acid, but it is a time-consuming and energy-intensive process. In recent years, new approaches for producing PGS, PGS blends, and PGS copolymers have been reported to not only reduce the time and energy required to obtain the final material but also to adjust the properties and processability of the PGS-based materials based on the desired applications. This review compiles more than 20 years of PGS synthesis reports, reported inconsistencies, and proposed alternatives to more rapidly produce PGS polymer structures or PGS derivatives with tailor-made properties. Synthesis conditions such as temperature, reaction time, reagent ratio, atmosphere, catalysts, microwave-assisted synthesis, and PGS modifications (urethane and acrylate groups, blends, and copolymers) were revisited to present and discuss the diverse alternatives to produce and adapt PGS.

Micro-/Nano-Structured Biodegradable Pressure Sensors for Biomedical Applications

The interest in biodegradable pressure sensors in the biomedical field is growing because of their temporary existence in wearable and implantable applications without any biocompatibility issues. In contrast to the limited sensing performance and biocompatibility of initially developed biodegradable pressure sensors, device performances and functionalities have drastically improved owing to the recent developments in micro-/nano-technologies including device structures and materials. Thus, there is greater possibility of their use in diagnosis and healthcare applications. This review article summarizes the recent advances in micro-/nano-structured biodegradable pressure sensor devices. In particular, we focus on the considerable improvement in performance and functionality at the device-level that has been achieved by adapting the geometrical design parameters in the micro- and nano-meter range. First, the material choices and sensing mechanisms available for fabricating micro-/nano-structured biodegradable pressure sensor devices are discussed. Then, this is followed by a historical development in the biodegradable pressure sensors. In particular, we highlight not only the fabrication methods and performances of the sensor device, but also their biocompatibility. Finally, we intoduce the recent examples of the micro/nano-structured biodegradable pressure sensor for biomedical applications.

A Biodegradable and Recyclable Piezoelectric Sensor Based on a Molecular Ferroelectric Embedded in a Bacterial Cellulose Hydrogel

Currently, various electronic devices make our life more and more safe, healthy, and comfortable, but at the same time, they produce a large amount of nondegradable and nonrecyclable electronic waste that threatens our environment. In this work, we explore an environmentally friendly and flexible mechanical sensor that is biodegradable and recyclable. The sensor consists of a bacterial cellulose (BC) hydrogel as the matrix and imidazolium perchlorate (ImClO₄) molecular ferroelectric as the functional element, the hybrid of which possesses a high sensitivity of 4 mV kPa^-1 and a wide operational range from 0.2 to 31.25 kPa, outperforming those of most devices based on conventional functional biomaterials. Moreover, the BC hydrogel can be fully degraded into glucose and oligosaccharides, while ImClO₄ can be recyclable and reused for the same devices, leaving no environmentally hazardous electronic waste.

The status and perspectives of nanostructured materials and fabrication processes for wearable piezoresistive sensors

The wearable sensors have attracted a growing interest in different markets, including health, fitness, gaming, and entertainment, due to their outstanding characteristics of convenience, simplicity, accuracy, speed, and competitive price. The development of different types of wearable sensors was only possible due to advances in smart nanostructured materials with properties to detect changes in temperature, touch, pressure, movement, and humidity. Among the various sensing nanomaterials used in wearable sensors, the piezoresistive type has been extensively investigated and their potential have been demonstrated for different applications. In this review article, the current status and challenges of nanomaterials and fabrication processes for wearable piezoresistive sensors are presented in three parts. The first part focuses on the different types of sensing nanomaterials, namely, zero-dimensional (0D), one-dimensional (1D), two-dimensional (2D), and three-dimensional (3D) piezoresistive nanomaterials. Then, in second part, their fabrication processes and integration are discussed. Finally, the last part presents examples of wearable piezoresistive sensors and their applications.

Highly Sensitive Flexible Pressure Sensors Enabled by Mixing of Silicone Elastomer With Ionic Liquid-Grafted Silicone Oil

Developing highly sensitive flexible pressure sensors has become crucially urgent due to the increased societal demand for wearable electronic devices capable of monitoring various human motions. The sensitivity of such sensors has been shown to be significantly enhanced by increasing the relative dielectric permittivity of the dielectric layers used in device construction via compositing with immiscible ionic conductors. Unfortunately, however, the elastomers employed for this purpose possess inhomogeneous morphologies, and thus suffer from poor long-term durability and unstable electrical response. In this study, we developed a novel, flexible, and highly sensitive pressure sensor using an elastomeric dielectric layer with particularly high permittivity and homogeneity due to the addition of synthesized ionic liquid-grafted silicone oil (denoted LMS-EIL). LMS-EIL possesses both a very high relative dielectric permittivity (9.6 × 105 at 10-1 Hz) and excellent compatibility with silicone elastomers due to the covalently connected structure of conductive ionic liquid (IL) and chloropropyl silicone oil. A silicone elastomer with a relative permittivity of 22 at 10-1 Hz, Young's modulus of 0.78 MPa, and excellent homogeneity was prepared by incorporating 10 phr (parts per hundreds rubber) of LMS-EIL into an elastomer matrix. The sensitivity of the pressure sensor produced using this optimized silicone elastomer was 0.51 kPa-1, which is 100 times higher than that of the pristine elastomer. In addition, a high durability illustrated by 100 loading-unloading cycles and a rapid response and recovery time of approximately 60 ms were achieved. The excellent performance of this novel pressure sensor suggests significant potential for use in human interfaces, soft robotics, and electronic skin applications.

A Composite Microfiber for Biodegradable Stretchable Electronics

Biodegradable stretchable electronics have demonstrated great potential for future applications in stretchable electronics and can be resorbed, dissolved, and disintegrated in the environment. Most biodegradable electronic devices have used flexible biodegradable materials, which have limited conformality in wearable and implantable devices. Here, we report a biodegradable, biocompatible, and stretchable composite microfiber of poly(glycerol sebacate) (PGS) and polyvinyl alcohol (PVA) for transient stretchable device applications. Compositing high-strength PVA with stretchable and biodegradable PGS with poor processability, formability, and mechanical strength overcomes the limits of pure PGS. As an application, the stretchable microfiber-based strain sensor developed by the incorporation of Au nanoparticles (AuNPs) into a composite microfiber showed stable current response under cyclic and dynamic stretching at 30% strain. The sensor also showed the ability to monitor the strain produced by tapping, bending, and stretching of the finger, knee, and esophagus. The biodegradable and stretchable composite materials of PGS with additive PVA have great potential for use in transient and environmentally friendly stretchable electronics with reduced environmental footprint.

A Review: Optimization for Poly(glycerol sebacate) and Fabrication Techniques for Its Centered Scaffolds

Poly(glycerol sebacate) (PGS), an emerging promising thermosetting polymer synthesized from sebacic acid and glycerol, has attracted considerable attention due to its elasticity, biocompatibility, and tunable biodegradation properties. But it also has some drawbacks such as harsh synthesis conditions, rapid degradation rates, and low stiffness. To overcome these challenges and optimize PGS performance, various modification methods and fabrication techniques for PGS-based scaffolds have been developed in recent years. Outlining the current modification approaches of PGS and summarizing the fabrication techniques for PGS-based scaffolds are of great importance to accelerate the development of new materials and enable them to be appropriately used in potential applications. Thus, this review comprehensively overviews PGS derivatives, PGS composites, PGS blends, processing for PGS-based scaffolds, and their related applications. It is envisioned that this review could instruct and inspire the design of the PGS-based materials and facilitate tissue engineering advances into clinical practice.

Poly(Glycerol Sebacate) in Biomedical Applications-A Review of the Recent Literature

Poly(glycerol sebacate) (PGS) continues to attract attention for biomedical applications owing to its favorable combination of properties. Conventionally polymerized by a two-step polycondensation of glycerol and sebacic acid, variations of synthesis parameters, reactant concentrations or by specific chemical modifications, PGS materials can be obtained exhibiting a wide range of physicochemical, mechanical, and morphological properties for a variety of applications. PGS has been extensively used in tissue engineering (TE) of cardiovascular, nerve, cartilage, bone and corneal tissues. Applications of PGS based materials in drug delivery systems and wound healing are also well documented. Research and development in the field of PGS continue to progress, involving mainly the synthesis of modified structures using copolymers, hybrid, and composite materials. Moreover, the production of self-healing and electroactive materials has been introduced recently. After almost 20 years of research on PGS, previous publications have outlined its synthesis, modification, properties, and biomedical applications, however, a review paper covering the most recent developments in the field is lacking. The present review thus covers comprehensively literature of the last five years on PGS-based biomaterials and devices focusing on advanced modifications of PGS for applications in medicine and highlighting notable advances of PGS based systems in TE and drug delivery.

Biodegradable Materials for Sustainable Health Monitoring Devices

The recent advent of biodegradable materials has offered huge opportunity to transform healthcare technologies by enabling sensors that degrade naturally after use. The implantable electronic systems made from such materials eliminate the need for extraction or reoperation, minimize chronic inflammatory responses, and hence offer attractive propositions for future biomedical technology. The eco-friendly sensor systems developed from degradable materials could also help mitigate some of the major environmental issues by reducing the volume of electronic or medical waste produced and, in turn, the carbon footprint. With this background, herein we present a comprehensive overview of the structural and functional biodegradable materials that have been used for various biodegradable or bioresorbable electronic devices. The discussion focuses on the dissolution rates and degradation mechanisms of materials such as natural and synthetic polymers, organic or inorganic semiconductors, and hydrolyzable metals. The recent trend and examples of biodegradable or bioresorbable materials-based sensors for body monitoring, diagnostic, and medical therapeutic applications are also presented. Lastly, key technological challenges are discussed for clinical application of biodegradable sensors, particularly for implantable devices with wireless data and power transfer. Promising perspectives for the advancement of future generation of biodegradable sensor systems are also presented.

Low-Hysteresis and Ultrasensitive Microcellular Structures for Wearable Electronic Applications

Wearable technologies offer the opportunity to record human physiological signals in real time, in a noninvasive way, and the data can be used to aid in the early detection of abnormal health conditions. Here, we demonstrate how the interconnected porosity can be used to increase the sensitivity and linearity of capacitive pressure sensors. The finite element analysis supports the experimental observation that the movement of air during the dynamic mechanical loading is responsible for the high sensitivity observed (0.18 ± 0.01 kPa^-1) when compared with the solid poly(glycerol sebacate) sensor (0.0042 ± 0.0002 kPa^-1). The porous sensors present strain insensitivity and remarkable linearity over the entire range of applied mechanical pressure (0-6 kPa), capable of detecting both static and dynamic mechanical stimuli (17 nm/s), and a response time of 50 ms, without evidence of fatigue or electrical hysteresis over 10,000 mechanical cycles. The outstanding features of the porous sensors can find a broad range of applications in real-time health monitoring, from demanding movements like walking/running, to small deformations resulting from breathing or heart beating. The ultrasensitive microcellular structures synthesized in this study can be applied to other types of sensing transductions to obtain tunable and function-specific sensors with high sensitivity.

Toward Biodegradable Electronics: Ionic Diodes Based on a Cellulose Nanocrystal-Agarose Hydrogel

Bioderived cellulose nanocrystals (CNCs) are used to create light, flexible, biocompatible, and biodegradable electronic devices. Herein, surface modification of cellulose nanocrystals was employed to fabricate cationic and anionic CNCs. Subsequently, we demonstrated rectification behavior from a fixed junction between two agarose hydrogels doped with cationic and anionic cellulose nanocrystals. The current rectification ratio reaches 70 reproducibly, which is significantly higher than that for analogous diodes generated with microfibrillated cellulose (∼15) and the first polyelectrolyte gel diode (∼40). The current-voltage characteristics of the CNC-hydrogel diode are influenced by concentration, gel thickness, scanning frequency, and applied voltage. The high surface area of CNC resulted in high charge density after surface modification, which in turn resulted in good rectification behavior from only small amounts of dopant material.

Finite Element Modeling in the Design Process of 3D Printed Pneumatic Soft Actuators and Sensors

The modeling of soft structures, actuators, and sensors is challenging, primarily due to the high nonlinearities involved in such soft robotic systems. Finite element modeling (FEM) is an effective technique to represent soft and deformable robotic systems containing geometric nonlinearities due to large mechanical deformations, material nonlinearities due to the inherent nonlinear behavior of the materials (i.e., stress-strain behavior) involved in such systems, and contact nonlinearities due to the surfaces that come into contact upon deformation. Prior to the fabrication of such soft robotic systems, FEM can be used to predict their behavior efficiently and accurately under various inputs and optimize their performance and topology to meet certain design and performance requirements. In this article, we present the implementation of FEM in the design process of directly three-dimensional (3D) printed pneumatic soft actuators and sensors to accurately predict their behavior and optimize their performance and topology. We present numerical and experimental results to show that this approach is very effective to rapidly and efficiently design the soft actuators and sensors to meet certain design requirements and to save time, modeling, design, and fabrication resources.

Flexible Piezoresistive Sensors with Wide-Range Pressure Measurements Based on a Graded Nest-like Architecture

Flexible pressure sensors present great potential in the application of human health monitoring, tactile function of prosthesis, and electronic skin for robotics. These applications require different trade-off between the sensitivity and sensing range, therefore, it is imperative to develop range-specific sensitivities in a single sensor. In this paper, a bioinspired strategy for a resistive pressure sensor using a graded porous material is proposed to measure pressures from several pascals to megapascals. Its fabrication is based on an easily accessible template method. The nest-architecture-based wide-range pressure sensor exhibits adequate sensitivity under an extensive pressure regime (20 Pa to 1.2 MPa). In addition, with rational structural design and subtle engineering of the material properties, the sensor achieves remarkable mechanical stability. To prove the concept, sensors were attached on a bicycle wheel to monitor the tire-pavement pressure and on human skin to detect biosignals such as venous and arterial blood pressure pulses.