Development of Novel Lignin-Based Targeted Polymeric Nanoparticle Platform for Efficient Delivery of Anticancer Drugs

Applications of polymeric nanoparticles in drug delivery for glioblastoma

Glioblastoma (GBM) remains one of the most aggressive and treatment-resistant brain tumors, necessitating innovative therapeutic approaches. Polymer-based nanotechnology has emerged as a promising solution, offering precise drug delivery, enhanced blood-brain barrier (BBB) penetration, and adaptability to the tumor microenvironment (TME). This review explores the diverse applications of polymeric nanoparticles (NPs) in GBM treatment, including delivery of chemotherapeutics, targeted therapeutics, immunotherapeutics, and other agents for radiosensitization and photodynamic therapy. Recent advances in targeted delivery and multifunctional polymer highlight their potential to overcome the challenges that GBM brought, such as heterogeneity of the tumor, BBB limitation, immunosuppressive TME, and consideration of biocompatibility and safety. Meanwhile, the future directions to address these challenges are also proposed. By addressing these obstacles, polymer-based nanotechnology represents a transformative strategy for improving GBM treatment outcomes, paving the way for more effective and patient-specific therapies.

Facile Preparation of a Multifunctional Hydrogel Composite Dressing via Dual Self-Redox Mechanism for Accelerated Infected Wound Healing

The management of infected wound healing remains a formidable challenge primarily due to the absence of an ideal wound dressing that can not only effectively inhibit persistent bacterial infection and mitigate excessive inflammation but also possess appropriate mechanical strength, moderate adhesiveness, and favorable self-healability to maintain its protective function and facilitate easy change. In this study, we present an effective strategy for the preparation of a novel composite hydrogel under mild conditions, without the need for additives. This is achieved by incorporating resveratrol (RSV)-loaded alkali lignin nanoparticles (ARNPs) into an advanced polyacrylamide-based hydrogel matrix. The utilization of ARNPs facilitated the sustained release of RSV, thereby enhancing its bioavailability. The polymerization of acrylamide was gently triggered by free radicals generated through a novel dual self-redox mechanism involving silver ions (Ag+), catechols, and ammonium persulfate in neutral and at room temperature, without the requirement of cross-linkers. The dual self-redox reactions played a dominant role in facilitating the gelation process and imparting the desired properties to the resulting hydrogels. The obtained product exhibited exceptional antibacterial properties, favorable anti-inflammatory activity, superior tensile strength, moderate adhesiveness, and reliable self-healability, thereby accelerating the closure of infected wounds. Collectively, this study synergistically integrated RSV-sustained release nanoparticles and a specially designed multifunctional hydrogel into a single system in a conveniently manipulable manner. This composite wound dressing material holds promise for promoting the healing of infected wounds and has potential applications in other complex wound treatments.

Pineapple Agro-Industrial Biomass to Produce Biomedical Applications in a Circular Economy Context in Costa Rica

Pineapple is a highly demanded fruit in international markets due to its unique appearance and flavor, high fiber content, vitamins, folic acid, and minerals. It makes pineapple production and processing a significant source of income for producing countries, such as Costa Rica. This review collects bibliographic information dating back to the beginnings of pineapple production in Costa Rica to the state of the market today. It details the impacts of its production chain and proposes a biorefinery as a solution to environmental problems. Besides the potentiality of new sustainable markets to contribute to the post-COVID-19 economy in Costa Rica is highlighted. The general characteristics of pineapple by-products -cellulose, hemicellulose, lignin, and other high-value products like bromelain y saponin- are described, as well as the primary processes for their ex-traction via biorefinery and main applications in the medical field. Finally, a brief description of the main works in the literature involving modeling and simulation studies of pineapple by-products properties is included.

Advances in Antitumor Nano-Drug Delivery Systems of 10-Hydroxycamptothecin

10-Hydroxycamptothecin (HCPT) is a natural plant alkaloid from Camptotheca that shows potent antitumor activity by targeting intracellular topoisomerase I. However, factors such as instability of the lactone ring and insolubility in water have limited the clinical application of this drug. In recent years, unprecedented advances in biomedical nanotechnology have facilitated the development of nano drug delivery systems. It has been found that nanomedicine can significantly improve the stability and water solubility of HCPT. NanoMedicines with different diagnostic and therapeutic functions have been developed to significantly improve the anticancer effect of HCPT. In this paper, we collected reports on HCPT nanomedicines against tumors in the past decade. Based on current research advances, we dissected the current status and limitations of HCPT nanomedicines development and looked forward to future research directions.

Cationic Amphiphilic Dendrons with Anticancer Activity

Cancer has become the leading cause of human death worldwide, and there is an urgent need to design and develop new oncology drugs. In this study, we report series of cationic amphiphilic dendrons with different hydrophobic alkyl chains (C_n) and different generations (G_x) and demonstrate their use for anticancer applications. The results revealed that lower-generation dendrons (G₁) with a longer hydrophobic alkyl chain (C₁₂ and C₁₈) have stronger antitumor activity. Among these dendrons, a lead candidate C₁₂-G₁ was identified that demonstrated excellent broad-spectrum antitumor activity in 7 cancer cell lines including highly metastatic tumor cells, while simultaneously, hemolysis was negligible. Mechanistic studies showed that C₁₂-G₁ could lead to cytoplasmic leakage and induce cancer cell necrosis through membrane disruption. In addition, C₁₂-G₁ showed potent inhibition of tumor growth in a B16-F10 melanoma model. In conclusion, these findings demonstrate that the cationic amphiphilic dendron might be a promising agent for anticancer application.

Unravelling the Hydration Barrier of Lignin Oleate Nanoparticles for Acid- and Base-Catalyzed Functionalization in Dispersion State

Lignin nanoparticles (LNPs) are promising renewable nanomaterials with applications ranging from biomedicine to water purification. However, the instability of LNPs under acidic and basic conditions severely limits their functionalization for improved performance. Here, we show that controlling the degree of esterification can significantly improve the stability of lignin oleate nanoparticles (OLNPs) in acidic and basic aqueous dispersions. The high stability of OLNPs is attributed to the alkyl chains accumulated in the shell of the particle, which delays protonation/deprotonation of carboxylic acid and phenolic hydroxyl groups. Owing to the enhanced stability, acid‐ and base‐catalyzed functionalization of OLNPs at pH 2.0 and pH 12.0 via oxirane ring‐opening reactions were successfully performed. We also demonstrated these new functionalized particles as efficient pH‐switchable dye adsorbents and anticorrosive particulate coatings.

Microfluidic Synthesis of Lignin/Chitosan Nanoparticles for the pH-Responsive Delivery of Anticancer Drugs

In this work, lignin/chitosan nanoparticles (Lig/Chi NPs) with controlled structures were synthesized in a simple and scalable microfluidic system. When the positively charged chitosan and the negatively charged lignin solution were blended in a microreactor, Lig/Chi NPs were rapidly formed via the electrostatic coassembly between the amino groups of chitosan and the carboxyl groups of lignin. The ζ potential changes from negative (-13 mV) to positive (+54.5 mV) for Lig NPs and Lig/Chi NPs, respectively. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) results demonstrated that Lig/Chi NPs have an average particle size of about 180 nm, which can be used as nanocarriers for drug delivery. The anticancer drug nanoparticles with docetaxel (DTX) and curcumin (CCM) were prepared by coassembly with Lig/Chi NPs in a microreactor, which had good drug loading efficiency, biocompatibility, and can release drugs in response to pH in the weakly acidic environment of the tumor. The drug release amounts in acidic solutions that simulated the tumor microenvironment were 51% (DTX@Lig/Chi NPs) and 50% (CCM@Lig/Chi NPs), respectively, which were better than the release amounts at pH 7.4, and have an obvious killing effect on HeLa cells.

Metabolic Changes of Cholangiocarcinoma Cells in Response to Coniferyl Alcohol Treatment

Cholangiocarcinoma (CCA) is a major cause of mortality in Northeast Thailand with about 14,000 deaths each year. There is an urgent necessity for novel drug discovery to increase effective treatment possibilities. A recent study reported that lignin derived from Scoparia dulcis can cause CCA cell inhibition. However, there is no evidence on the inhibitory effect of coniferyl alcohol (CA), which is recognized as a major monolignol-monomer forming a very complex structure of lignin. Therefore, we aimed to investigate the effect of CA on CCA cell apoptosis. We demonstrated that a half-inhibitory concentration of CA on KKU-100 cells at 48 h and 72 h was 361.87 ± 30.58 and 268.27 ± 18.61 μg/mL, respectively, and on KKU-213 cells 184.37 ± 11.15 and 151.03 ± 24.99 μg/mL, respectively. Furthermore, CA induced CCA cell apoptosis as demonstrated by annexin V/PI staining in correspondence with an increase in the BAX/Bcl-2 ratio. A metabonomic study indicated that CA significantly decreased the intracellular concentrations of glutathione and succinate in KKU-213 cells and increased dihydrogen acetone phosphate levels in KKU-100 cells treated with 200 µg/mL of CA compared to the control group. In conclusion, CA induced cellular metabolic changes which are involved in the antioxidant defense mechanism, glycerophospholipid metabolism and the tricarboxylic acid cycle. CA may serve as a potent anticancer agent for CCA treatment by inducing CCA cellular apoptosis.

Self-Assembled Organic Nanomaterials for Drug Delivery, Bioimaging, and Cancer Therapy

Over the past few decades, tremendous progress has been made in the development of engineering nanomaterials, which opened new horizons in the field of diagnosis and treatment of various diseases. In particular, self-assembled organic nanomaterials with intriguing features including delicate structure tailoring, facile processability, low cost, and excellent biocompatibility have shown outstanding potential in biomedical applications because of the enhanced permeability and retention (EPR) effect and multifunctional properties. In this review, we briefly introduce distinctive merits of self-assembled organic nanomaterials for biomedical applications. The main focus will be placed on summarizing recent advances in self-assembled organic nanomedicine for drug delivery, bioimaging, and cancer phototherapy, followed by highlighting a critical perspective on further development of self-assembled organic nanomaterials for future clinical translation. We believe that the above themes will appeal to researchers from different fields, including material, chemical, and biological sciences, as well as pharmaceutics.

Engineering Lignin Nanomicroparticles for the Antiphotolysis and Controlled Release of the Plant Growth Regulator Abscisic Acid

Lignin is the most abundant aromatic biopolymer in nature and is a major byproduct from the paper industry. The unlocking of lignin's potential for high-value applications has gained increasing attention in recent years. In this study, alkali lignin (AL), with a rigid conjugated structure and amphiphilic property, was used as a sustainable and eco-friendly encapsulation material for the protection and controlled release of photosensitive abscisic acid (ABA), an important and widely used plant growth regulator. Cetyltrimethylammonium bromide (CTAB) was used to induce the formation of AL-CTAB nanomicroparticles by self-assembly. The size and morphology of AL-CTAB particles were modified by changing the AL concentration and the dispersion agent. AL (0.3 M) dissolved in tetrahydrofuran could form a uniform size (300 nm) of particles with a regular spherical structure. Subsequently, ABA was loaded on the prepared nanomicroparticles to synthesize the capsule formulation of ABA@AL-CTAB. The controlled-release behavior and the antiphotolysis performance as well as the thermal stability of ABA@AL-CTAB were proved to be superior. Lasting inhibition of Arabidopsis and rice seed germination by ABA@AL-CTAB under light irradiations implied protection of ABA from photolysis. In addition, ABA@AL-CTAB could effectively regulate plant stomata, thereby increasing plant drought resistance. Overall, lignin is suitable for the preparation of agrochemical formulations with excellent controlled release and antiphotolysis performances.

Lignin-Graft-Poly(lactic-co-glycolic) Acid Biopolymers for Polymeric Nanoparticle Synthesis

A lignin-graft-poly(lactic-co-glycolic) acid (PLGA) biopolymer was synthesized with two types of lignin (LGN), alkaline lignin (ALGN) and sodium lignosulfonate (SLGN), at different (A/S)LGN/PLGA ratios (1:2, 1:4, and 1:6 w/w). 1H NMR and Fourier-transform infrared spectroscopy (FT-IR) confirmed the conjugation of PLGA to LGN. The (A/S)LGN-graft-PLGA biopolymers were used to form nanodelivery systems suitable for entrapment and delivery of drugs for disease treatment. The LGN-graft-PLGA NPs were generally small (100-200 nm), increased in size with the amount of PLGA added, monodisperse, and negatively charged (-48 to -60 mV). Small-angle scattering data showed that particles feature a relatively smooth surface and a compact spherical structure with a distinct core and a shell. The core size and shell thickness varied with the LGN/PLGA ratio, and at a 1:6 ratio, the particles deviated from the core-shell structure to a complex internal structure. The newly developed (A/S)LGN-graft-PLGA NPs are proposed as a potential delivery system for applications in biopharmaceutical, food, and agricultural sectors.

Lignin Biopolymers in the Age of Controlled Polymerization

Polymers made from natural biomass are gaining interest due to the rising environmental concerns and depletion of petrochemical resources. Lignin isolated from lignocellulosic biomass is the second most abundant natural polymer next to cellulose. The paper pulp process produces industrial lignin as a byproduct that is mostly used for energy and has less significant utility in materials applications. High abundance, rich chemical functionalities, CO2 neutrality, reinforcing properties, antioxidant and UV blocking abilities, as well as environmental friendliness, make lignin an interesting substrate for materials and chemical development. However, poor processability, low reactivity, and intrinsic structural heterogeneity limit lignins' polymeric applications in high-performance advanced materials. With the advent of controlled polymerization methods such as ATRP, RAFT, and ADMET, there has been a great interest in academia and industry to make value-added polymeric materials from lignin. This review focuses on recent investigations that utilize controlled polymerization methods to generate novel lignin-based polymeric materials. Polymers developed from lignin-based monomers, various polymer grafting technologies, copolymer properties, and their applications are discussed.

Engineering Lignin Stabilized Bimetallic Nanocomplexes: Structure, Mechanistic Elucidation, Antioxidant, and Antimicrobial Potential

Lignin, being a natural antioxidant and antimicrobial underutilized biopolymer derived mainly from agro-waste, is a material of great interest. In this study, lignin was chosen as a matrix to synthesize silver-gold bimetallic and monometallic nanocomplexes to explore the synergistic antioxidant and antimicrobial properties of the lignin stabilized nanoagents. The synthesis of the nanocomplexes was carried out using a one pot method, utilizing lignin as the sole source for reducing, capping, and stabilizing the nanoagents. Further, characterization studies were performed to determine the exact structure of the nanocomplexes. The developed nanocomplexes were found to possess substantial phenolic and flavonoid contents, which contributed to their high antioxidant activity. Further, the antioxidant and antimicrobial activity of the lignin-bimetallic and monometallic nanocomplexes was evaluated and compared with pristine lignin. Moreover, the mechanism behind the antimicrobial activity of the nanocomplexes was elucidated through various methods, namely, reactive oxygen generation, nucleic acid leakage, and DNA cleavage studies. The obtained results were greatly supported by scanning electron microscopy, transmission electron microscopy, and live-dead cell imaging techniques. This study is a contribution in converting waste to value added functional nanomaterials for potential antioxidant and antimicrobial applications.

Design of Controlled Release System for Paracetamol Based on Modified Lignin

The influence of lignin modification on drug release and pH-dependent releasing behavior of oral solid dosage forms was investigated using three different formulations. The first formulation contains microcrystalline cellulose (MCC 101) as the excipient and paracetamol as the active pharmaceutical ingredient (API). The second formulation includes Alcell lignin and MCC 101 as the excipient and paracetamol, and the third formulation consists of carboxylated Alcell lignin, MCC 101 and paracetamol. Direct compaction was carried out in order to prepare the tablets. Lignin can be readily chemically modified due to the existence of different functional groups in its structure. The focus of this investigation is on lignin carboxylation and its influence on paracetamol control release behavior at varying pH. Results suggest that carboxylated lignin tablets had the highest drug release, which is linked to their faster disintegration and lower tablet hardness.