Sustainable Biomass Materials for Biomedical Applications

Production of vanillin via oxidation depolymerization of lignin over Fe- and Mn-modified TS-1 zeolites

Converting lignin into specific aromatic chemicals for utilization through depolymerization of lignin is an effective way to achieve high-value applications. There are many depolymerization methods that can do this, but there are problems such as harsh reaction conditions, low depolymerization efficiency and uncontrollable target products that need to be solved. This study reports a novel system for the oxidative depolymerization of alkali lignin using Fe- and Mn- modified TS-1 as a catalyst to assist in the highly selective production of vanillin. We also proposed a possible reaction pathway for the oxidative depolymerization of alkali lignin to produce vanillin catalyzed by Fe-Mn/TS-1 catalyst. The catalytic effects of TS-1, Fe/TS-1, and Fe-Mn/TS-1 catalysts on the oxidative depolymerization of lignin to produce phenolic monomers and vanillin were investigated. The results show that the modified catalysts can effectively improve the efficiency of linkage bond breaking in lignin, especially the β-O-4 bond, in which the inter-band transitions of Fe and Mn play an important role. The synergistic effect of the bimetallic-loaded catalyst (Fe-Mn/TS-1) could catalyze the oxidative depolymerization of lignin more efficiently than the monometallic-loaded catalyst (Fe/TS-1). This lignin oxidative depolymerization system produced 40.59 wt% bio-oil including 12.24 wt% phenolic monomers and 16.17 wt% re-lignin after the addition of Fe-Mn/TS-1 catalyst, owning the highest phenolic monomer yield. Surprisingly, this lignin oxidative depolymerization system exhibited high yield for vanillin (8.36 wt%) production. These results demonstrated that the Fe-Mn/TS-1 catalytic system has potential to produce vanillin from lignin under mild conditions.

Fabrication and Optimization of Pickering Emulsion Stabilized by Lignin Nanoparticles for Curcumin Encapsulation

To develop reversible pH-responsive emulsifiers of natural origin, alkali lignin (AL) was used to develop oil-in-water Pickering emulsions. AL was first modified to synthesize quaternized alkali lignin (QAL), which displayed pH-responsive properties and demonstrated solubility in both acidic and alkaline solutions. In contrast, QAL exhibited insolubility and formed particles in neutral solutions, thereby making it a suitable candidate for utilization as an emulsifier in doubly pH-responsive Pickering emulsions. At pH 5-9, the emulsions were stable. Above or below this pH range, the system demulsifies, resulting in a reversible Pickering emulsifier with two pH-controlled transitions. On the basis of this pH-dependent behavior, lignin-based Pickering emulsions (LPE) could be subjected to several cycles of emulsification-demulsification by alternating the pH of the aqueous phase between basic and acidic, while the droplet size and storage stability were maintained. Curcumin was used as a drug model to study the loading/release behavior of LPE, finding that 50.08% of curcumin could be encapsulated in LPE. The in vitro release of curcumin was pH-dependent. In addition, LPE exhibited an outstanding protective effect against the ultraviolet-induced degradation of curcumin.

Water Extracts from Industrial Hemp Waste Inhibit the Adhesion and Development of Candida Biofilm and Showed Antioxidant Activity on HT-29 Colon Cancer Cells

The evolution of regulatory perspectives regarding the health and nutritional properties of industrial hemp-based products (Cannabis sativa L.) has pushed research to focus on the development of new methods for both the extraction and formulation of the bioactive compounds present in hemp extracts. While the psychoactive and medicinal properties of hemp-derived cannabinoid extracts are well known, much less has been investigated on the functional and antimicrobial properties of hemp extracts. Within the hemp value chain, various agricultural wastes and by-products are generated. These materials can be valorised through eco-innovations, ultimately promoting sustainable economic development. In this study, we explored the use of waste from industrial light cannabis production for the extraction of bioactive compounds without the addition of chemicals. The five extracts obtained were tested for their antimicrobial activity on both planktonic and sessile cells of pathogenic strains of the Candida albicans, Candida parapsilosis, and Candida tropicalis species and for their antioxidant activity on HT-29 colon cancer cells under oxidative stress. Our results demonstrated that these extracts display interesting properties both as antioxidants and in hindering the development of fungal biofilm, paving the way for further investigations into the sustainable valorisation of hemp waste for different biomedical applications.

Preparation of nanochitin using deep eutectic solvents

Chitin is an abundant and renewable non-wood biopolymer. Nanochitin is formed by the assembly of chitin molecules, which has the advantages of large tensile strength, high specific surface area, and biodegradability, so it has been widely used. However, the traditional methods of preparing nanochitin have many drawbacks. As the new generation of green solvents, deep eutectic solvents (DESs) have been successfully applied in the fields of chitin dissolution, extraction, and nanochitin preparation. In this review, the relevant knowledge of chitin, nanochitin, and DESs was first introduced. Then, the application status of DESs in the fields of chitin was summarized, with a focus on the preparation of nanochitin using DESs. In conclusion, this review provided a comprehensive analysis of the published literature and proposed insights and development trends in the field of preparation of nanochitin using DESs, aiming to provide guidance and assistance for future researchers.

A supramolecular approach for converting renewable biomass into functional materials

The rational transformation and utilization of biomass have attracted increasing attention because of its high importance in sustainable development and green economy. In this study, we used a supramolecular approach to convert biomass into functional materials. Six biomass raw materials with distinct chemical structures and physical properties were copolymerized with thioctic acid (TA) to afford poly[TA-biomass]s. The solvent-free copolymerization leads to the convenient and quantitative fabrication of biomass-based versatile materials. The non-covalent bonding and reversible solid-liquid transitions in poly[TA-biomass]s endow them with diversified features, including thermal processability, 3D printing, wet and dry adhesion, recyclability, impact resistance, and antimicrobial activity. Benefiting from their good biocompatibility and nontoxicity, these biomass-based materials are promising candidates for biological applications.

Dendronization of chitosan to afford unprecedent thermoresponsiveness and tunable microconfinement

Convenient chemical modification of biomacromolecules to create novel biocompatible functional materials satisfies the current requirements of sustainable chemistry. Dendronization of chitosan with dendritic oligoethylene glycols (OEGs) paves a strategy for the preparation of functional dendronized chitosans (DCSs) with unprecedent thermoresponsive behavior, which inherit biological features from polysaccharides and the topological features from dendritic OEGs. In addition, densely packed dendritic OEG chains around the backbone provide efficient cooperative interactions and form an intriguing confined microenvironment based on the degradable biopolymers. In this perspective, we describe the principle for the preparation of the thermoresponsive DCSs, and focus on the molecular envelop effect from the hydrophobic microconfinement to the encapsulated guest molecules or moieties. Particular attention is put on their capacity to regulate behavior and the functions of the encapsulated guests through thermally-mediated dehydration and collapse of the densely packed dendritic OEGs. We believe that the methodology described here may provide prospects for the fabrication of functional materials from biomacromolecules, especially when used as environmentally friendly nanomaterials or in accurate diagnosis and therapy.

Fabrication and Characterization of a Polydopamine-Modified Bacterial Cellulose and Sugarcane Filter Cake-Derived Hydroxyapatite Composite Scaffold

The search for environmentally friendly and sustainable sources of raw materials has been ongoing for quite a while, and currently, the utilization and applications of agro-industrial biomass residues in biomedicine are being researched. In this study, a polydopamine (PDA)-modified bacterial cellulose (BC) and hydroxyapatite (HA) composite scaffold was fabricated using the freeze-drying method. The as-prepared hydroxyapatite was synthesized via the chemical precipitation method using sugarcane filter cake as a calcium source, as reported in a previous study. X-ray diffraction analysis revealed a carbonated phase of the prepared hydroxyapatite, similar to that of the natural bone mineral. Wide-angle X-ray scattering analysis revealed the successful fabrication of BC/HA composite scaffolds, while X-ray photoelectron spectroscopy suggested that PDA was deposited on the surface of the BC/HA composite scaffolds. In vitro cell viability assays indicated that BC/HA and PDA-modified composite scaffolds did not induce cytotoxicity and were biocompatible with MC3T3-E1 preosteoblasts. PDA-modified composite scaffolds showed enhanced protein adsorption capacity in vitro compared to the unmodified scaffolds. On a concluding note, these results demonstrate that agro-industrial biomass residues have the potential to be used in biomedical applications and that PDA-modified BC/HA composite scaffolds are a promising biomaterial for bone tissue engineering.

Sustainable Approach of Functional Biomaterials-Tissue Engineering for Skin Burn Treatment: A Comprehensive Review

Burns are a widespread global public health traumatic injury affecting many people worldwide. Non-fatal burn injuries are a leading cause of morbidity, resulting in prolonged hospitalization, disfigurement, and disability, often with resulting stigma and rejection. The treatment of burns is aimed at controlling pain, removing dead tissue, preventing infection, reducing scarring risk, and tissue regeneration. Traditional burn wound treatment methods include the use of synthetic materials such as petroleum-based ointments and plastic films. However, these materials can be associated with negative environmental impacts and may not be biocompatible with the human body. Tissue engineering has emerged as a promising approach to treating burns, and sustainable biomaterials have been developed as an alternative treatment option. Green biomaterials such as collagen, cellulose, chitosan, and others are biocompatible, biodegradable, environment-friendly, and cost-effective, which reduces the environmental impact of their production and disposal. They are effective in promoting wound healing and reducing the risk of infection and have other benefits such as reducing inflammation and promoting angiogenesis. This comprehensive review focuses on the use of multifunctional green biomaterials that have the potential to revolutionize the way we treat skin burns, promoting faster and more efficient healing while minimizing scarring and tissue damage.

Synthesis and Cytotoxicity Evaluation of Betulin Cycloolefin Derivatives by Ruthenium-Catalyzed Ring-Closing Metathesis

The combination of ring-closing metathesis with betulin enables the design and synthesis of novel biomolecules representing a library of triterpenoid derivatives for potential pharmacological research. In this work, cyclic olefin betulin derivatives were attempted to be prepared by the combination of ring-closing metathesis with betulin. Dicyclohexyl carbodiimide coupling reaction allowed the transformation of betulin into two types of linear olefin derivatives that have different methylene spacer lengths between the olefin and ester groups. Subsequently, betulin-based cycloolefins were synthesized by ring-closing metathesis using Grubbs first-generation catalyst. The influence of different parameters including solvents, temperature, catalysts, and catalyst loading on ring-closing metathesis was investigated. Cytotoxicity results indicated that these betulin-based olefin derivatives, derived from renewable bioresources, have potential applications in the biomedical field.

Computational Design and Manufacturing of Sustainable Materials through First-Principles and Materiomics

Engineered materials are ubiquitous throughout society and are critical to the development of modern technology, yet many current material systems are inexorably tied to widespread deterioration of ecological processes. Next-generation material systems can address goals of environmental sustainability by providing alternatives to fossil fuel-based materials and by reducing destructive extraction processes, energy costs, and accumulation of solid waste. However, development of sustainable materials faces several key challenges including investigation, processing, and architecting of new feedstocks that are often relatively mechanically weak, complex, and difficult to characterize or standardize. In this review paper, we outline a framework for examining sustainability in material systems and discuss how recent developments in modeling, machine learning, and other computational tools can aid the discovery of novel sustainable materials. We consider these through the lens of materiomics, an approach that considers material systems holistically by incorporating perspectives of all relevant scales, beginning with first-principles approaches and extending through the macroscale to consider sustainable material design from the bottom-up. We follow with an examination of how computational methods are currently applied to select examples of sustainable material development, with particular emphasis on bioinspired and biobased materials, and conclude with perspectives on opportunities and open challenges.

Green Drug Discovery: Novel Fragment Space from the Biomass-Derived Molecule Dihydrolevoglucosenone (CyreneTM)

Biomass-derived molecules can provide a basis for sustainable drug discovery. However, their full exploration is hampered by the dominance of millions of old-fashioned screening compounds in classical high-throughput screening (HTS) libraries frequently utilized. We propose a fragment-based drug discovery (FBDD) approach as an efficient method to navigate biomass-derived drug space. Here, we perform a proof-of-concept study with dihydrolevoglucosenone (Cyrene^TM), a pyrolysis product of cellulose. Diverse synthetic routes afforded a 100-membered fragment library with a diversity in functional groups appended. The library overall performs well in terms of novelty, physicochemical properties, aqueous solubility, stability, and three-dimensionality. Our study suggests that Cyrene-based fragments are a valuable green addition to the drug discovery toolbox. Our findings can help in paving the way for new hit drug candidates that are based on renewable resources.

Reengineering Waste Boxwood Powder into Light and High-Strength Biodegradable Composites to Replace Petroleum-Based Synthetic Materials

The preparation of biocomposites from renewable and sustainable forestry residues is an effective method to significantly reduce the environmental pollution caused by synthetic materials such as plastics and synthetic fibers. This study is aimed at developing a clean process for the large-scale production of high-performance green biocomposites without involving any chemical adhesive. Adhesive-free biocomposites with superior mechanical properties were prepared using HCl ball milling pretreatment and in situ synthesis. The nano-Fe₃O₄ was uniformly dispersed in the cellulose matrix, and when the matrix was subjected to external forces, the stress concentration effect around the particles absorbed energy, thus effectively improving the mechanical strength of the matrix. The flexural strength and tensile strength of BWP(Fe₃O₄) samples were increased by 159.04 and 175.34%, compared to that of regular wood powder control samples. The lignin melts under high temperature and pressure and then forms a carbonized layer on the surface of the biocomposites during the cooling process, which prevents the rapid penetration of water from the surface and also gives the biocomposites good thermal stability. The results of this research can avoid the harmful volatiles generated by chemical adhesive than that of the traditional fiberboard process and effectively replace petroleum-based synthetic materials prepared using the addition of various chemical additives, making it conform to the concept of environmental protection and sustainability.

A Review on Development of Bio-Inspired Implants Using 3D Printing

Biomimetics is an emerging field of science that adapts the working principles from nature to fine-tune the engineering design aspects to mimic biological structure and functions. The application mainly focuses on the development of medical implants for hard and soft tissue replacements. Additive manufacturing or 3D printing is an established processing norm with a superior resolution and control over process parameters than conventional methods and has allowed the incessant amalgamation of biomimetics into material manufacturing, thereby improving the adaptation of biomaterials and implants into the human body. The conventional manufacturing practices had design restrictions that prevented mimicking the natural architecture of human tissues into material manufacturing. However, with additive manufacturing, the material construction happens layer-by-layer over multiple axes simultaneously, thus enabling finer control over material placement, thereby overcoming the design challenge that prevented developing complex human architectures. This review substantiates the dexterity of additive manufacturing in utilizing biomimetics to 3D print ceramic, polymer, and metal implants with excellent resemblance to natural tissue. It also cites some clinical references of experimental and commercial approaches employing biomimetic 3D printing of implants.

Keratin-Based Nanoparticles with Tumor-Targeting and Cascade Catalytic Capabilities for the Combinational Oxidation Phototherapy of Breast Cancer

Photodynamic therapy (PDT) holds tantalizing prospects of a prominent cancer treatment strategy. However, its efficacy remains limited by virtue of the hypoxic tumor microenvironment and the inadequate tumor-targeted delivery of photosensitizers, and these can be further exacerbated by the lack of development of a well-controlled nitric oxide (NO) release system at the target site. Inspired by Chinese medicine, we propose a revealing new keratin application. Keratin has garnered attention as an NO generator; however, its oncological use has rarely been investigated. We hypothesized that the incorporation of a phenylboronic acid (PBA) targeting ligand/methylene blue (MB) photosensitizer with a keratin NO donor would facilitate precise tumor delivery, enhancing PDT. Herein, we demonstrated that MB@keratin/PBA/d-α-tocopherol polyethylene glycol 1000 succinate (TPGS) nanoparticles (MB@KPTNPs) specifically targeted breast cancer cells and effectively suppressed their growth. Through MB-mediated biometabolism, the endocytic MB@KPTNPs produced a sufficient amount of intracellular NO that reduced the glutathione level while boosting the efficiency of PDT. A therapeutic combination of NO/PDT was therefore achieved, resulting in significant inhibition of both in vivo tumor growth and lung metastasis. These findings underscore the importance of utilizing keratin-based nanoparticles that simultaneously combine targeting of the tumor and self-generating NO with a cascading catalytic ability as a novel oxidation therapeutic strategy for enhancing PDT.

On the Design of Novel Biofoams Using Lignin, Wheat Straw, and Sugar Beet Pulp as Precursor Material

In this paper, we report the synthesis and characterization of pyrolyzed lignin compacts reinforced with 50 wt % wheat straw (WS) or sugar beet pulp (SBP) fibers. The compacts were pyrolyzed at 300, 500, 700, and 900 °C in an Ar atmosphere. Detailed thermogravimetric analysis (TGA), thermomechanical analysis (TMA), Fourier transform infrared (FTIR) spectroscopy, and microstructure analysis were performed on these samples. FTIR analysis showed that pyrolysis of lignin-WS and lignin-SBP resulted in aromatic char. Scanning electron microscope (SEM) studies showed that foams obtained by pyrolyzing both lignin-50 wt % SBP and lignin-50 wt % WS composites have a cellular structure. X-ray tomography and energy-dispersive spectrometry (EDS) studies showed that pyrolysis of wheat straw caused the formation of mineral-rich nodules in the pyrolyzed lignin matrix, which was responsible for the denser and uniform microstructure of the lignin-WS composites. Due to this reason, the lignin-WS composites were denser and had a better mechanical strength as compared to the lignin-SBP composites. Both the compositions also showed temperature-dependent wettability behavior.

How does bovine serum albumin sustain in saccharomate® derived from pine tree biomass?

Nowadays, research on renewable raw materials and bioresources is a new concern towards the promotion of sustainable process and product development. The use of various plant biomasses such as starch, lignocellulosic and saccharide can be considered as an alternative for using cheaper and less polluting raw materials. In this regard, pine tree biomass, a lignocellulosic forest residue that has various value-added importance and it acts as a model of economic value to the agro-industrial fields. On the other hand, in order to meet and address the challenges of ever-increasing demands of bioresources, there has been significant research interest in deciphering the molecular interactions between proteins and biomass derived substances. No study reports the significance of saccharomate® derived from pine tree biomass on the structural and thermal stability of proteins. There is a sizable interest in the interactions between proteins and biomass derived substances, owing to their utilization and applications. Herein, we used various biophysical techniques such as absorption spectroscopy, fluorescence spectroscopy, circular dichroism (CD) and dynamic light scattering (DLS) to study the impact of pine tree biomass derived saccharomate® (PBDS) on bovine serum albumin (BSA). Further for better understanding of morphological changes of BSA in presence of biomass, Transmission electron microscopy (TEM) was also studied. The present study revealed that the increasing concentration of saccharomate® perturbs structural stability however; the thermal stability of BSA remained unchanged. The transition temperature of BSA remained approximately same in presence of different concentrations of PBDS. Furthermore, the size of BSA increases from 9.22 nm to 135.58 nm in presence of higher concentration of PBDS as revealed by DLS studies. To the best of our knowledge, the results represent first detailed proof of the unusual effect of PBDS on the model protein BSA.

Biomass-Derived Dialdehyde Cellulose Cross-linked Chitosan-Based Nanocomposite Hydrogel with Phytosynthesized Zinc Oxide Nanoparticles for Enhanced Curcumin Delivery and Bioactivity

A sustainable biomass-based nanocomposite hydrogel was formulated, characterized, and applied for curcumin delivery. Phytosynthesized zinc oxide nanoparticles (ZnO NPs) employing musk melon (Cucumis melo) seed extract was embedded in the hydrogel matrices and cross-linked using Dialdehyde cellulose prepared from sugarcane (Saccharum officinarum) bagasse (SCB). Nanoparticle incorporation enhanced the hydrogel's swelling degree to 4048% at pH 4.0. Also, an improved tensile strength of 14.1 ± 0.32 MPa was exhibited by the nanocomposite hydrogel compared to 9.79 ± 0.76 MPa for the pure chitosan cellulose hydrogel. A curcumin loading efficiency of 89.68% with around 30% increased loading was exhibited for the nanocomposite hydrogel. A Fickian diffusion-controlled curcumin release mechanism with maximum release at pH 7.4 was obtained. The synergistic effect on the antimicrobial activity was exhibited against Staphylococcus aureus and Trichophyton rubrum. The in vitro cytotoxicity studies employing L929 cells and A431 cells demonstrated good biocompatibility and enhanced anticancer activity of the curcumin-loaded green nanocomposite hydrogel compared to pure curcumin.