Selective Activation of Benzyl Alcohol Coupled with Photoelectrochemical Water Oxidation via a Radical Relay Strategy

Solar-driven highly selective conversion of glycerol to dihydroxyacetone using surface atom engineered BiVO4 photoanodes

Dihydroxyacetone is the most desired product in glycerol oxidation reaction because of its highest added value and large market demand among all possible oxidation products. However, selectively oxidative secondary hydroxyl groups of glycerol for highly efficient dihydroxyacetone production still poses a challenge. In this study, we engineer the surface of BiVO4 by introducing bismuth-rich domains and oxygen vacancies (Bi-rich BiVO4-x) to systematically modulate the surface adsorption of secondary hydroxyl groups and enhance photo-induced charge separation for photoelectrochemical glycerol oxidation into dihydroxyacetone conversion. As a result, the Bi-rich BiVO4-x increases the glycerol oxidation photocurrent density of BiVO4 from 1.42 to 4.26 mA cm-2 at 1.23 V vs. reversible hydrogen electrode under AM 1.5 G illumination, as well as the dihydroxyacetone selectivity from 54.0% to 80.3%, finally achieving a dihydroxyacetone production rate of 361.9 mmol m-2 h-1 that outperforms all reported values. The surface atom customization opens a way to regulate the solar-driven organic transformation pathway toward a carbon chain-balanced product.

Selective Oxidation of Alcohol to Valuable Aldehydes Using Water as a Promoter in a Photoelectrochemical Cell

Artificial photoelectrochemistry (PEC) has emerged as a promising and efficient technology for the sustainable conversion of solar energy into chemicals. In this study, we present a refined PEC process that enables the highly selective and stable production of piperonal and other valuable aldehydes through the oxidation of the corresponding alcohols. By employing Fe2O3 or TiO2 as the photoanode material and 2,2,6,6-tetramethylpiperidinooxy (TEMPO) as a redox mediator in an H2O/acetonitrile solution, we achieve 100% selectivity and a >95% Faradaic efficiency for piperonal production from piperonyl alcohol (PA) oxidation. Remarkably, we reveal the enhancing effect on the PA oxidation reactivity of appropriate-amount water in the solvent as it plays a crucial role in inhibiting the photoelectron-hole recombination efficiency and facilitating charge transfer. Mechanistic analysis suggests that TEMPO-mediated PA oxidation involves the formation of •O2- radicals by the reduction of oxygen on the cathode, resulting in water as the sole byproduct. Furthermore, our PEC oxidation system exhibits applications on the 100%-selective production of various conjugated aldehydes, including 4-anisaldehyde, cuminaldehyde, and the vitamin B6 derivative. By implementing a TiO2//Fe2O3 dual-photoanode system, we achieve an enhanced piperonal production rate of 31.2 μmol h-1 cm-2 at 1.0 V vs Ag/Ag+ and demonstrate its stability over a 102 h cyclic test, ensuring near-quantitative yield. This research illuminates the potential of the PEC strategy as a generally applicable method for the efficient production of high-value aldehydes.

Unraveling the pyridinic nitrogen vacancy in carbon nitride for photo-self Fenton-like purification of organic contaminants

This work reports a carbon nitride with pyridinic nitrogen-vacancy (N2CV-CN), which purifies organic contaminants via an in-situ photo-self Fenton-like reaction. Experiments and calculations demonstrated that the nitrogen-vacancy induces lone-paired (LP) and symmetry-unpaired electrons, promoting the formation of low-energy LP-π hybridized orbitals and helping to overcome the pairing energy required for oxygen to accept electrons. Furthermore, the nitrogen-vacancy accelerates film and intra-particle diffusion rates of organic contaminants on N2CV-CN, creating beneficial conditions for reactive oxide species to mineralize organic contaminants. Under sunlight and atmospheric oxygen, a photo-self Fenton-like reaction involving proton-coupled electron transfer occurred on the surface of N2CV-CN. Furthermore, by integrating photocatalysis with flocculation, about 99.1 % suspended substance, 45.5 % chemical oxygen demand, and 38.4 % biological oxygen demand were reduced from polluted river-water. Constructing N2CV-CN and understanding its crucial role offer theoretical and methodological insights into the in-situ purification of contaminated water bodies.

Nanoconfinement Enables Photoelectrochemical Selective Oxidation of Glycerol via the Microscale Fluid Effect

The glycerol oxidation reaction (GOR) run with photoelectrochemical cells (PECs) is one of the most promising ways to upgrade biomass because it is thermodynamically favorable, while irreversible overoxidation leads to unsatisfactory product selectivities. Herein, a tunable one-dimensional nanoconfined environment was introduced into the GOR process, which accelerated mass transfer of glycerol via the microscale fluid effect and changed the main oxidation product from formic acid (FA) to glyceraldehyde (GLD), which led to retention of the heavier multicarbon products. The rate of glycerol diffusion in the nanochannels increased by a factor of 4.92 with decreasing inner diameters. The main product from the PEC-selective oxidation of glycerol changed from the C1 product FA to the C3 product GLD with a great selectivity of 60.7%. This work provides a favorable approach for inhibiting further oxidation of multicarbon products and illustrates the importance of microenvironmental regulation in biomass oxidation.

Advances and challenges in the modification of photoelectrode materials for photoelectrocatalytic water splitting

With the increasing consumption of fossil fuels, the development of clean and renewable alternative fuels has become a top priority. Hydrogen (H2) is an ideal primary clean energy source for its extremely high gravimetric energy density, carbon-free combustion, and abundant natural resources. Photoelectrocatalytic (PEC) water splitting is among the most promising approaches for converting sunlight and water into H2. However, the cost-effectiveness and the overall solar to hydrogen conversion efficiency of PEC water splitting are still big challenges. In the past few decades, several studies have been devoted to this technology, and it is essential to develop economical photoelectrocatalysts with high conversion efficiency. Therefore, there is an urgent need for a comprehensive and updated review of recent advances in the design, manufacture, and modification of efficient PEC water splitting systems. This review first starts with the basic mechanism of photoelectrochemical water splitting. Then the problems in PEC water splitting are discussed, and the methods of photoelectrode modulation such as nanostructure fabrication, doping engineering, surface modification, and heterojunction construction are introduced. Finally, the critical challenges and future trends/perspectives in the PEC water splitting are discussed.

Stabilizing BiVO4 Photoanode in Bicarbonate Electrolyte for Efficient Photoelectrocatalytic Alcohol Oxidation

In order to expand the application of bismuth vanadate (BiVO4) to the field of photoelectrochemistry, researchers have explored the potential of BiVO4 in catalyzing or degrading organic substances, potentially presenting a green and eco-friendly solution. A study was conducted to investigate the impact of electrolytes on the photocatalysis of benzyl alcohol by BiVO4. The research discovered that, in an acetonitrile electrolyte (pH 9) with sodium bicarbonate, BiVO4 catalyzed benzyl alcohol by introducing saturated V5+. This innovation addressed the issue of benzyl alcohol being susceptible to catalysis in an alkaline setting, as V5+ was prone to dissolution in pH 9 on BiVO4. The concern of the photocorrosion of BiVO4 was mitigated through two approaches. Firstly, the incorporation of a non-aqueous medium inhibited the formation of active material intermediates, reducing the susceptibility of the electrode surface to photocorrosion. Secondly, the presence of saturated V5+ further deterred the leaching of V5+. Concurrently, the production of carbonate radicals by bicarbonate played a vital role in catalyzing benzyl alcohol. The results show that, in this system, BiVO4 has the potential to oxidize benzyl alcohol by photocatalysis.

Organic Upgrading through Photoelectrochemical Reactions: Toward Higher Profits

Aqueous photoelectrochemical (PEC) cells have long been considered a promising technology to convert solar energy into hydrogen. However, the solar-to-H2 (STH) efficiency and cost-effectiveness of PEC water splitting are significantly limited by sluggish oxygen evolution reaction (OER) kinetics and the low economic value of the produced O2 , hindering the practical commercialization of PEC cells. Recently, organic upgrading PEC reactions, especially for alternative OERs, have received tremendous attention, which improves not only the STH efficiency but also the economic effectiveness of the overall reaction. In this review, PEC reaction fundamentals and reactant-product cost analysis of organic upgrading reactions are briefly reviewed, recent advances made in organic upgrading reactions, which are categorized by their reactant substrates, such as methanol, ethanol, glycol, glycerol, and complex hydrocarbons, are then summarized and discussed. Finally, the current status, further outlooks, and challenges toward industrial applications are discussed.

Defect Engineering of WO3 by Rapid Flame Reduction for Efficient Photoelectrochemical Conversion of Methane into Liquid Oxygenates

Photoelectrochemical (PEC) conversion is a promising way to use methane (CH4) as a chemical building block without harsh conditions. However, the PEC conversion of CH4 to value-added chemicals remains challenging due to the thermodynamically favorable overoxidation of CH4. Here, we report WO3 nanotube (NT) photoelectrocatalysts for PEC CH4 conversion with high liquid product selectivity through defect engineering. By tuning the flame reduction treatment, we carefully controlled the oxygen vacancies of WO3 NTs. The optimally reduced WO3 NTs suppressed overoxidation of CH4 showing a high total C1 liquid selectivity of 69.4% and a production rate of 0.174 μmol cm-2 h-1. Scanning electrochemical microscopy revealed that oxygen vacancies can restrain the production of hydroxyl radicals, which, in excess, could further oxidize C1 intermediates to CO2. Additionally, band diagram analysis and computational studies elucidated that oxygen vacancies thermodynamically suppress overoxidation. This work introduces a strategy for understanding and controlling the selectivity of photoelectrocatalysts for direct conversion of CH4 to liquids.

CFD modeling and simulation of benzyl alcohol oxidation coupled with hydrogen production in a continuous-flow photoelectrochemical reactor

Various conversion routes of biomass and its derivative compounds into high-value products has attracted attention from researchers recently. Among these, a solar-driven photoelectrochemical (PEC) oxidation approach of biomass alcohols to aldehydes is particularly of great interest for the potential applications because the reaction is selective and simultaneously accompanied with hydrogen production. Here, we propose a simulation of selective oxidation of benzyl alcohol into benzaldehyde coupled with hydrogen production in a 2-dimensional continuous-flow PEC reactor using COMSOL Multiphysics (5.6). In order to develop and fabricate a simple yet efficient reactor for a practical use, it is crucial to investigate the effects of operating and design parameters of the reactor on the reactions. Our studies demonstrated that the main contributions to product formation were the electrolyte flow velocity and the width of electrolyte channels. The optimized design parameter exhibited good photoelectrochemical performance with uniform potential distribution within the channels which served diffusion of neutral and charged species and electrochemical reaction. The maximum conversion of benzyl alcohol in this work was 48.25% with 100% selectivity of benzaldehyde. These findings are key for the design of the continuous-flow PEC reactor that can be applied to any series of biomass conversion reactions under mild conditions.

Interfacial Se-O Bonds Modulating Spatial Charge Distribution in FeSe2/Nb:Fe2O3 with Rapid Hole Extraction for Efficient Photoelectrochemical Water Oxidation

Surface engineering is an effective strategy to improve the photoelectrochemical (PEC) catalytic activity of hematite, and the defect states with abundant coordinative unsaturation atoms can serve as anchoring sites for constructing intimate connections between semiconductors. On this basis, we anchored an ultrathin FeSe2 layer on Nb5+-doped Fe2O3 (FeSe2/Nb:Fe2O3) via interfacial Se-O chemical bonds to tune the surface potential. Density functional theory (DFT) calculations indicate that amorphous FeSe2 decoration could generate electron delocalization over the composite photoanodes so that the electron mobility was improved to a large extent. Furthermore, electrons could be transferred via the newly formed Se-O bonds at the interface and holes were collected at the surface of electrode for PEC water oxidation. The desired charge redistribution is in favor of suppressing charge recombination and extracting effective holes. Later, work function calculations and Mott-Schottky (M-S) plots demonstrate that a type-II heterojunction was formed in FeSe2/Nb:Fe2O3, which further expedited carrier separation. Except for spatial carrier modulation, the amorphous FeSe2 layer also provided abundant active sites for intermediates adsorption according to the d band center results. In consequence, the target photoanodes attained an improved photocurrent density of 2.42 mA cm-2 at 1.23 V versus the reversible hydrogen electrode (RHE), 2.5 times as that of the bare Fe2O3. This study proposed a defect-anchoring method to grow a close-connected layer via interfacial chemical bonds and revealed the spatial charge distribution effects of FeSe2 on Nb:Fe2O3, giving insights into rational designation in composite photoanodes.

Anchoring Bi2S3 quantum dots on flower-like TiO2 nanostructures to boost photoredox coupling of H2 evolution and oxidative organic transformation

The rational integration of semiconductor quantum dots (QDs) with anatase TiO2 nanostructures is a promising strategy to develop efficient photocatalysts. Herein, Bi2S3QD/TiO2 photocatalyst was constructed by controllably depositing Bi2S3 QDs on flower-like TiO2 nanostructures and used for the photocatalytic redox-coupling reaction of H2 evolution and oxidative transformation of benzyl alcohol. The abundant amino groups in TiO2 nanostructures served as the anchoring sites for uniform growth of Bi2S3 QDs. The anchoring of Bi2S3 QDs onto TiO2 nanostructures not only enhanced the photoabsorption ability and the photogenerated charge separation efficiency but also afforded powerful photogenerated charge carriers and abundant active sites for the photocatalytic reaction. As a result, the Bi2S3QD/TiO2 photocatalyst exhibited a favorable performance in the redox-coupling reaction, providing the high production rates of H2 up to 4.75 mmol·gcat-1·h-1 and benzaldehyde up to 6.12 mmol·gcat-1·h-1, respectively, as well as an excellent stability in the long-term photocatalytic reaction. Meanwhile, a trace amount of water in the reaction system could act as a promoter to accelerate the photocatalytic redox-coupling reaction. The photocatalytic mechanism following S-scheme heterojunction was proposed according to the systematic characterizations and experimental results. This work offers some insight into the rational construction of efficient and cost-effective photocatalysts for the conversion of solar to chemical energy.

Covalent organic frameworks bearing Ni active sites for free radical-mediated photoelectrochemical organic transformations

Photoelectrochemical (PEC) organic transformations occurring at anodes are a promising strategy for circumventing the sluggish kinetics of the oxygen evolution reaction. Here, we report a free radical-mediated reaction instead of direct hole transfer occurring at the solid/liquid interface for PEC oxidation of benzyl alcohol (BA) to benzaldehyde (BAD) with high selectivity. A bismuth vanadate (BiVO4) photoanode coated with a 2,2'-bipyridine-based covalent organic framework bearing single Ni sites (Ni-TpBpy) was developed to drive the transformation. Experimental studies reveal that the reaction at the Ni-TpBpy/BiVO4 photoanode followed first-order reaction kinetics, boosting the formation of surface-bound ·OH radicals, which suppressed further BAD oxidation and provided a nearly 100% selectivity and a rate of 80.63 μmol hour-1 for the BA-to-BAD conversion. Because alcohol-to-aldehyde conversions are involved in the valorizations of biomass and plastics, this work is expected to open distinct avenues for producing key intermediates of great value.

Plasmon-Induced Radical-Radical Heterocoupling Boosts Photodriven Oxidative Esterification of Benzyl Alcohol over Nitrogen-Doped Carbon-Encapsulated Cobalt Nanoparticles

Selective oxidation of alcohols under mild conditions remains a long-standing challenge in the bulk and fine chemical industry, which usually requires environmentally unfriendly oxidants and bases that are difficult to separate. Here, a plasmonic catalyst of nitrogen-doped carbon-encapsulated metallic Co nanoparticles (Co@NC) with an excellent catalytic activity towards selective oxidation of alcohols is demonstrated. With light as only energy input, the plasmonic Co@NC catalyst effectively operates via combining action of the localized surface-plasmon resonance (LSPR) and the photothermal effects to achieve a factor of 7.8 times improvement compared with the activity of thermocatalysis. A high turnover frequency (TOF) of 15.6 h-1 is obtained under base-free conditions, which surpasses all the reported catalytic performances of thermocatalytic analogues in the literature. Detailed characterization reveals that the d states of metallic Co gain the absorbed light energy, so the excitation of interband d-to-s transitions generates energetic electrons. LSPR-mediated charge injection to the Co@NC surface activates molecular oxygen and alcohol molecules adsorbed on its surface to generate the corresponding radical species (e.g., ⋅O2 - , CH3 O⋅ and R-⋅CH-OH). The formation of multi-type radical species creates a direct and forward pathway of oxidative esterification of benzyl alcohol to speed up the production of esters.

Construction of Co2 P-Ni3 S2 /NF Heterogeneous Structural Hollow Nanowires as Bifunctional Electrocatalysts for Efficient Overall Water Splitting

Designing efficient and stable transition metal-based catalysts for electrocatalytic water splitting is vital for the development of hydrogen production. Herein, a facile synthetic strategy is developed to fabricate transition metal-based heterogeneous structural Co2 P-Ni3 S2 hollow nanowires supported on nickel foam (Co2 P-Ni3 S2 /NF). Owing to the multiple active sites provided by transition metal compounds, large surface area of the unique hollow nanowire morphology, and the synergistic effect of Co2 P-Ni3 S2 heterostructure interfaces, Co2 P-Ni3 S2 /NF requires ultralow overpotentials of 110, 164 mV for HER and 331.7, 358.3 mV for OER at large current densities of 100, 500 mA cm-2 in alkaline medium, respectively. Importantly, the two-electrode electrolyzer assembled by Co2 P-Ni3 S2 /NF displays a cell voltage of 1.54 V at 10 mA cm-2 and operates stably over 24 h at 100 mA cm-2 , which performs better than reported transition metal-based bifunctional electrocatalysts. This work presents a successful fabrication of transition metal-based bifunctional HER/OER electrocatalysts at large-current density and brings new inspiration for developing applicable energy conversion materials.

Investigation of BiVO4-based advanced oxidation system for decomposition of organic compounds and production of reactive sulfate species

Growth of population and expansion of industries lead to increasing contamination of environment with various organic pollutants. If not properly cleaned, wastewater contaminates freshwater resources, aquatic environment and has huge negative impact on ecosystems, quality of drinking water and human health, therefore new and effective purification systems are in demand. In this work bismuth vanadate-based advanced oxidation system (AOS) for the decomposition of organic compounds and production of reactive sulfate species (RSS) was investigated. Pure and Mo-doped BiVO₄ coatings were synthesized using sol-gel process. Composition and morphology of coatings were characterized using X-ray diffraction and scanning electron microscopy techniques. Optical properties were analyzed using UV-vis spectrometry. Photoelectrochemical performance was studied using linear sweep voltammetry, chronoamperometry and electrochemical impedance spectroscopy. It was shown that increase in Mo content affects the morphology of BiVO₄ films, reduces charge transfer resistance and enhances the photocurrent in the solutions of sodium borate buffer (with and without glucose) and Na₂SO₄. Mo-doping of 5-10 at.% leads to 2- to 3-fold increase in photocurrents. Faradaic efficiencies of RSS formation ranged between 70 and 90 % for all samples irrespective of Mo content. All studied coatings demonstrated high stability in long-lasting photoelectrolysis. In addition, effective light-assisted bactericidal performance of the films in deactivation of Gram positive Bacillus sp. bacteria was demonstrated. Advanced oxidation system designed in this work can be applied in sustainable and environmentally friendly water purification systems.

Selectively Permeable FeOOH Amorphous Layer Coating CdS for Enhancing Photocatalytic Conversion of Benzyl Alcohol and Selectivity to Benzaldehyde

The development of new strategies to improve reaction efficiency and light utilization is one of the biggest challenges in photosynthetic chemistry. Dynamics control, particularly tuning the adsorption/desorption of reactants and products, is an ideal way to improve the conversion and selectivity in catalytic reactions, but it is rarely studied for photocatalytic organic synthesis. This study concerns the design of an amorphous FeOOH coating to decorate CdS photocatalyst to control the adsorption and desorption of reactants and products to improve reaction efficiency for the photocatalytic conversion of benzyl alcohol (BA) into benzaldehyde (BAD). The best conversion of the core-shell photocatalyst is 74.1 % in 2 h, together with >99.9 % selectivity to BAD, and the photocatalyst exhibits response above 600 nm, which is the longest active wavelength reported for the reaction. Further data illustrate that the amorphous FeOOH coating enables selective sorption of BA/BAD molecules by H-bonding interactions, which may result in the excellent performance. Construction of amorphous coating layers and understanding the selective permeability may provide a new strategy for the design of more efficient photocatalytic systems for organic synthesis.

Mechanism insight into the facet-dependent photoaging of polystyrene microplastics on hematite in freshwater

Hematite, as an extensive natural mineral with multiple crystal facets, profoundly affects the migration and transformation of pollutants in the natural environment. However, little is known about the photochemical behavior of microplastics on different facets of hematite in the aquatic environment. In this work, the photoaging of polystyrene microplastics (PS-MPs) on different crystal planes ({001}, {100}, and {012} facets) and related mechanisms were studied. Two-dimensional correlation spectroscopy analysis illustrated that the reaction pathways of PS-MPs photoaging on hematite tended to preferential chemical oxidization. The stronger performance of PS-MPs photoaging, expressed by particle size reduction and surface oxidation, was observed on the {012} crystal facet. Under irradiation, {012} facet-dominated hematite with a narrower bandgap (1.93 eV) reinforced the photogenerated charge carrier separation, and the lower activation energy barrier (1.41 eV calculated from density functional theory) led to effective •OH formation from water oxidation. These findings elucidate the underlying photoaging mechanism of MPs on hematite with different mineralogical phases.

Chelated Ion-Exchange Strategy toward BiOCl Mesoporous Single-Crystalline Nanosheets for Boosting Photocatalytic Selective Aromatic Alcohols Oxidation

The photoresponse and photocatalytic efficiency of bismuth oxychloride (BiOCl) are greatly limited by rapid recombination of photogenerated carriers. The construction of porous single-crystal BiOCl photocatalyst can effectively alleviate this issue and provide accessible active sites. Herein, a facile chelated ion-exchange strategy is developed to synthesize BiOCl mesoporous single-crystalline nanosheets (BiOCl MSCN) using acetic acid and ammonia solution respectively as chelating agent and ionization promoter. The strong chelation between acetate ions and Bi³⁺ ions introduces acetate ions into the precipitated product to exchange with Cl^- ions, resulting in large lattice mismatch, strain release, and formation of void-like mesopores. The prepared BiOCl MSCN photocatalyst exhibits excellent catalytic performance with 99% conversion and 98% selectivity for oxidation of benzyl alcohol to benzaldehyde and superior general adaptability for various aromatic alcohols. The theoretical calculations and characterizations confirm that the superior performance is mainly attributed to the abundant oxygen vacancies, plenty of accessible adsorption/active sites and fast charge transport path without grain boundaries.

Photoelectrochemical Epoxidation of Cyclohexene on an α-Fe2O3 Photoanode Using Water as the Oxygen Source

This study developed a safe and sustainable route for the epoxidation of cyclohexene using water as the source of oxygen at room temperature and ambient pressure. Here, we optimized the cyclohexene concentration, volume of solvent/water (CH₃CN, H₂O), time, and potential on the photoelectrochemical (PEC) cyclohexene oxidation reaction of the α-Fe₂O₃ photoanode. The α-Fe₂O₃ photoanode epoxidized cyclohexene to cyclohexene oxide with a 72.4 ± 3.6% yield and a 35.2 ± 1.6% Faradaic efficiency of 0.37 V vs Fc/Fc⁺ (0.8 V_Ag/AgCl) under 100 mW cm^-2. Furthermore, the irradiation of light (PEC) decreased the applied voltage of the electrochemical cell oxidation process by 0.47 V. This work supplies an energy-saving and environment-benign approach for producing value-added chemicals coupled with solar fuel generation. Epoxidation with green solvents via PEC methods has a high potential for different oxidation reactions of value-added and fine chemicals.

Boosting photoelectrochemical water splitting of bismuth vanadate photoanode via novel co-catalysts of amorphous manganese oxide with variable valence states

Bismuth vanadate (BVO) is a promising photoanode while suffers from sluggish oxygen evolution kinetics. Herein, an ultra-thin manganese oxide (MnO_x) is selected as co-catalyst to modify the surface of BVO photoanode by a facile spray pyrolysis method. The photoelectrochemical measurements demonstrate that surface charge transport efficiency (η_surface) of MnO_x modified BVO photoanode (BVO/MnO_x) is strikingly increased from 6.7 % to 22.3 % at 1.23 V_RHE (reversible hydrogen electrode (V_RHE)). Moreover, the η_surface can be further boosted to 51.3 % at 1.23 V_RHE after applying Ar plasma on the BVO/MnO_x sample_, which is around 7 times higher comparing with that of pristine BVO samples. Additional characterizations reveal that the remarkable PEC performance of the Ar-plasma treated BVO/MnO_x photoanode (BVO/MnO_x/Ar plasma) could be attributed to the increased charge carrier density, extended carrier lifetime and additional exposed Mn³⁺ active sites on the BVO surface. This investigation could provide a new understanding for the design of BVO photoanode with superior PEC performance based on the modification of MnO_x and plasma surface treatment.

Photodehydration of Ethanol Mediated by CuCl2-Ethanol Complex

Biomass ethanol is regarded as a renewable resource but it is not economically viable to transform it to high-value industrial chemicals at present. Herein, a simple, green, and low-cost CuCl₂-ethanol complex is reported for ethanol dehydration to produce ethylene and acetal simultaneously with high selectivity under sunlight irradiation. Under N₂ atmosphere, the generation rates of ethylene and acetal were 165 and 3672 μmol g^-1 h^-1, accounting for 100% in gas products and 97% in liquid products, respectively. An outstanding apparent quantum yield of 13.2% (365 nm) and the maximum conversion rate of 32% were achieved. The dehydration reactions start from the photoexcited CuCl₂-ethanol complex, and then go through the energy transfer (EnT) and ligand to metal charge transfer (LMCT) mechanisms to produce ethylene and acetal, respectively. The formation energies of the CuCl₂-ethanol complex and the key intermediate radicals (e.g., ·OH, CH₃CH₂·, and CH₃CH₂O·) were validated to clarify the mechanisms. Different from previous CuCl₂-based oxidation and addition reactions, this work is anticipated to supply new insights into the dehydration reaction of ethanol to produce useful chemical feedstocks.

Constructing a Photocatalyst for Selective Oxidation of Benzyl Alcohol to Benzaldehyde by Photo-Fenton-like Catalysis

A photoactive metal-organic framework (MOF), [K(H₂O)][Cu(DPNDI)][Cu(DPNDI)(CH₃CN)(H₂O)] [Cu_1.5(DPNDI)_1.5H_1.5P₂W₁₈O₆₂]·2H₂O (Cu(Ι)W-DPNDI), was prepared by combining a functional photosensitizer N, N'-bis(4-pyridylmethyl)naphthalene diimide (DPNDI), copper(I) ions, and an oxidation catalyst [P₂W₁₈O₆₂]^6- into a single framework via a hydrothermal process. Cu(Ι)W-DPNDI exhibited a stable structure, strong light absorption capacity, a suitable band gap, and photoelectric properties, which provided favorable conditions for photocatalysis. In the confined space, the well-aligned Cu(I) ions and POM polyanions played a synergetic effect in the electron-transfer process and reactive oxygen species generation. By coupling photocatalysis and heterogeneous Fenton-like catalysis, Cu(Ι)W-DPNDI displayed high efficiency for the selective oxidation of aromatic alcohols, with up to >99% selectivity and 75% yield.

Manipulating the surface states of BiVO4 through electrochemical reduction for enhanced PEC water oxidation

Bismuth vanadate (BiVO₄) is a prospective candidate for photoelectrochemical (PEC) water oxidation, but its commercial application is limited due to the serious surface charge recombination. In this work, we propose a novel and effective electrochemical reduction strategy combined with co-catalyst modification to manipulate the surface states of the BiVO₄ photoanode. Specifically, an ultrathin amorphous structure is formed on the surface of BiVO₄ after electrochemical reduction ascribed to the breaking of the surface metal-O bonds. Photoelectrochemical measurements and first-principles calculation show that the electrochemical reduction treatment can effectively reduce the surface energy, thereby passivating the recombined surface states (r-ss) and increasing the mobility of photogenerated holes. In addition, the FeOOH co-catalyst layer further increases the intermediate surface states (i-ss) of BiVO₄, stabilizes the surface structure and enhances its PEC performance. Benefiting from the superior charge transfer efficiency and the excellent water oxidation kinetics, the -0.8/BVO/Fe photoanode achieves 2.02 mA cm^-2 photocurrent at 1.23 V_RHE (2.4 times that of the original BiVO₄); meanwhile, the onset potential shifts 90 mV to the cathode. These results provide a new surface engineering tactic to modify the surface states of semiconductor photoanodes for high-efficiency PEC water oxidation.

Interface engineering of Fe2P@CoMnP4 heterostructured nanoarrays for efficient and stable overall water splitting

Electrocatalytic water splitting to generate high-quality hydrogen is an attractive renewable energy storage technology; however, it is still far from becoming a real-world application. In this study, we developed an effective and stable nickel foam-supported Fe₂P@CoMnP₄ heterostructure electrocatalyst for overall water splitting. As expected, the as-obtained Fe₂P@CoMnP₄/NF electrocatalyst exhibits superb bifunctional catalytic activity and only requires extremely low overpotentials of 53 and 249 mV to achieve a current density of 10 mA cm^-2 for the hydrogen and oxygen evolution reactions, respectively. Moreover, a two-electrode electrolyzer assembled using Fe₂P@CoMnP₄/NF as electrodes operates at the low cell voltage of 1.54 V at 10 mA cm^-2, showing excellent long-term stability for 140 h. Theoretical calculations indicate that the surface electronic structure is effectively adjusted by the generated heterointerfaces between the Fe₂P and CoMnP₄ in a two-phase matrix, resulting in a Gibbs free energy of hydrogen adsorption close to zero and high intrinsic activity. This innovative strategy is a valuable route for producing low-cost high-performance bifunctional electrocatalysts for water splitting.

Boosting Charge Transfer Efficiency by Nanofragment MXene for Efficient Photoelectrochemical Water Splitting of NiFe(OH)x Co-Catalyzed Hematite

The use of oxygen evolution co-catalysts (OECs) with hematite photoanodes has received much attention because of the potential to reduce surface charge recombination. However, the low surface charge transfer and bulk charge separation rate of hematite are not improved by decorating with OECs, and the intrinsic drawbacks of hematite still limit efficient photoelectrochemical (PEC) water splitting. Here, we successfully overcame the sluggish oxygen evolution reaction performance of hematite for water splitting by inserting zero-dimensional (0D) nanofragmented MXene (NFMX) as a hole transport material between the hematite and the OEC. The 0D NFMX was fabricated from two-dimensional (2D) MXene sheets and deposited onto the surface of a three-dimensional (3D) hematite photoanode via a centrifuge-assisted method without altering the inherent performance of the 2D MXene sheets. Among many OECs, NiFe(OH)x was selected as the OEC to improve hematite PEC performance in our system because of its efficient charge transport behavior and high stability. Because of the great synergy between NFMX and NiFe(OH)x, NiFe(OH)x/NFMX/Fe2O3 achieved a maximum photocurrent density of 3.09 mA cm-2 at 1.23 VRHE, which is 2.78-fold higher than that of α-Fe2O3 (1.11 mA cm-2). Furthermore, the poor stability of MXene in an aqueous solution for water splitting was resolved by uniformly coating it with NiFe(OH)x, after which it showed outstanding stability for 60 h at 1.23 VRHE. This study demonstrates the successful use of NFMX as a hole transport material combined with an OEC for highly efficient water splitting.

Boosting Reactive Oxygen Species Generation Using Inter-Facet Edge Rich WO3 Arrays for Photoelectrochemical Conversion

Water oxidation reaction leaves room to be improved in the development of various solar fuel productions, because of the kinetically sluggish 4-electron transfer process of oxygen evolution reaction. In this work, we realize reactive oxygen species (ROS), H₂ O₂ and OH⋅, formations by water oxidation with total Faraday efficiencies of more than 90 % by using inter-facet edge (IFE) rich WO₃ arrays in an electrolyte containing CO₃ ^2- . Our results demonstrate that the IFE favors the adsorption of CO₃ ^2- while reducing the adsorption energy of OH⋅, as well as suppresses surface hole accumulation by direct 1-electron and indirect 2-electron transfer pathways. Finally, we present selective oxidation of benzyl alcohol by in situ using the formed OH⋅, which delivers a benzaldehyde production rate of ≈768 μmol h^-1 with near 100 % selectivity. This work offers a promising approach to tune or control the oxidation reaction in an aqueous solar fuel system towards high efficiency and value-added product.

Crystal Facet-Modulated WO3 Nanoplate Photoanode for Photoelectrochemical Glyoxal Semi-oxidation into Glyoxylic Acid

Transforming glyoxal to value-added glyoxylic acid (GA) is highly desirable but challenging due to the uncontrollable over-oxidation. In this work, we report on a first demonstration of semi-oxidation of glyoxal with high selectivity (86.5%) and activity on WO₃ nanoplate photoanode through the photoelectrochemical strategy. The optimization of reactivity was achieved via crystal facet regulation, showing a satisfactory GA production rate of 308.4 mmol m^-2 h^-2, 84.0% faradaic efficiency, and 4.3% total solar-to-glyoxylic acid efficiency on WO₃ with enriched {200} facets at 1.6 V versus RHE. WO₃ with a high {200} facet ratio exhibits more efficient electron-hole transfer kinetics, resulting in the facilitated formation of hydroxyl radicals (^•OH) and glyoxal radicals. Meanwhile, the theoretical calculation results indicate that the high selectivity and activity come from the strong adsorption ability for glyoxal and the low reaction energy for glyoxal radical generation on the (200) facets of WO₃. Moreover, the high energy demand toward oxalic acid production on WO₃ leads to the exciting semi-oxidation process.

Photoelectrochemical alcohols oxidation over polymeric carbon nitride photoanodes with simultaneous H2 production

The photoelectrochemical oxidation of organic molecules into valuable chemicals is a promising technology, but its development is hampered by the poor stability of photoanodic materials in aqueous solutions, low faradaic efficiency, low product selectivity, and a narrow working pH range. Here, we demonstrate the synthesis of value-added aldehydes and carboxylic acids with clean hydrogen (H₂) production in water using a photoelectrochemical cell based solely on polymeric carbon nitride (CN) as the photoanode. Isotope labeling measurements and DFT calculations reveal a preferential adsorption of benzyl alcohol and molecular oxygen to the CN layer, enabling fast proton abstraction and oxygen reduction, which leads to the synthesis of an aldehyde at the first step. Further oxidation affords the corresponding acid. The CN photoanode exhibits excellent stability (>40 h) and activity for the oxidation of a wide range of substituted benzyl alcohols with high yield, selectivity (up to 99%), and faradaic efficiency (>90%).

Mechanistic Investigation of Enhanced Catalytic Selectivity toward Alcohol Oxidation with Ce Oxysulfate Clusters

Ceria-based materials have been highly desired in photocatalytic reactions due to their redox properties and strong oxygen storage and transfer ability. Herein, we report the structures of one CeCe₇₀ oxysulfate cluster and four MCe₇₀ clusters (M = Cu, Ni, Co, and Fe) with the same Ce₇₀ core. As noted, single-crystal X-ray diffraction confirmed the structures of CeCe₇₀ and the MCe₇₀ series, while Raman spectroscopy indicated an increase in oxygen defects upon the introduction of Cu and Fe ions. The clusters catalyzed the oxidation of 4-methoxybenzyl alcohol under ultraviolet light. CuCe₇₀ and FeCe₇₀ exhibited enhanced reactivity compared to CeCe₇₀ and improved aldehyde selectivity compared to control experiments. In comparison with their homogeneous congeners, the CeCe₇₀/MCe₇₀ clusters altered the location of radical generation from the bulk solution to the clusters' surfaces. Mechanistic studies highlight the role of oxygen defects and specific transition metal introduction for efficient photocatalysis. The mechanistic pathway in this study provides insight into how to select or design a highly selective catalyst for photocatalysis.

Enhanced photoelectrochemical performance of ZnO/NiFe-layered double hydroxide for water splitting: Experimental and photo-assisted density functional theory calculations

Hydrogen production technologies have attracted considerable attention with the increasing demand for renewable energy. Among them, the combined action of water electrolysis and solar energy has emerged. In this study, a hydrangea ZnO/NiFe-layered double hydroxide (LDH) heterojunction was synthesized using the two-step hydrothermal method. The resulting ZnO/NiFe-LDH improved the range and intensity of light response, thus meeting the requirement of electrocatalysis and photocatalysis in theory. Moreover, ZnO/NiFe-LDH demonstrated excellent activity in the electrochemical performance test in the presence of light. When used as a water splitting catalyst in a full cell, the cell voltage was 1.632 V, and Faradic efficiency was 99.1%. Moreover, from the in situ Raman and theoretical calculation results, it is possible to conclude that the synthesized ZnO/NiFe-LDH has the property of absorbing light energy, and the introduction of light energy can optimize the bandgap structure of the material and enhance the adsorption capacity of the system, thus significantly reducing the energy required for water splitting reaction. In sum, this study introduced a composition strategy for LDH heterojunction materials and presented a theoretical and experimental investigation of the light influence on the material structure and electrochemical reaction. Furthermore, it is believed that an important future direction of hydrogen production is photo-assisted water splitting.

High-performance BiVO4 photoanodes cocatalyzed with bilayer metal-organic frameworks for photoelectrochemical application

In this work, we modified a BiVO₄ photoanode with bilayer Fe-MOF and Ni-MOF as cocatalysts for the first time and obtained a highly efficient BiVO₄ composite photoanode whose photocurrent density was increased by 2.7 times. The optimized BiVO₄/Fe-MOF/Ni-MOF photoanode demonstrated a photocurrent density of 1.80 mA/cm² at 1.23 V vs. a reversible hydrogen electrode (RHE). The onset potential of the BiVO₄/Fe-MOF/Ni-MOF photoanode markedly decreased from 0.9 V to 0.69 V in comparison with the pure BiVO₄ photoanode. It is speculated that Fe-MOF and Ni-MOF led to more reactive oxygen evolution sites and that the bilayer cocatalysts synergistically promoted the separation of photogenerated electron-hole pairs, which may be the influencing factor for the photoelectrochemical performance of the BiVO₄/Fe-MOF/Ni-MOF photoanode being distinctively enhanced. Thus, this work sheds some interesting new light on the construction of a high-efficiency photoanode for photoelectrochemical applications.

Selective Photoelectrocatalytic Glycerol Oxidation to Dihydroxyacetone via Enhanced Middle Hydroxyl Adsorption over a Bi2O3-Incorporated Catalyst

Photoelectrocatalytic (PEC) glycerol oxidation offers a sustainable approach to produce dihydroxyacetone (DHA) as a valuable chemical, which can find use in cosmetic, pharmaceutical industries, etc. However, it still suffers from the low selectivity (≤60%) that substantially limits the application. Here, we report the PEC oxidation of glycerol to DHA with a selectivity of 75.4% over a heterogeneous photoanode of Bi₂O₃ nanoparticles on TiO₂ nanorod arrays (Bi₂O₃/TiO₂). The selectivity of DHA can be maintained at ∼65% under a relatively high conversion of glycerol (∼50%). The existing p-n junction between Bi₂O₃ and TiO₂ promotes charge transfer and thus guarantees high photocurrent density. Experimental combined with theoretical studies reveal that Bi₂O₃ prefers to interact with the middle hydroxyl of glycerol that facilitates the selective oxidation of glycerol to DHA. Comprehensive reaction mechanism studies suggest that the reaction follows two parallel pathways, including electrophilic OH* (major) and lattice oxygen (minor) oxidations. Finally, we designed a self-powered PEC system, achieving a DHA productivity of 1.04 mg cm^-2 h^-1 with >70% selectivity and a H₂ productivity of 0.32 mL cm^-2 h^-1. This work may shed light on the potential of PEC strategy for biomass valorization toward value-added products via PEC anode surface engineering.

Mechanistic Insights into Selective Acetaldehyde Formation from Ethanol Oxidation on Hematite Photoanodes by Operando Spectroelectrochemistry

This study employed operando spectroelectrochemical l and photoelectrochemical methods to investigate the charge carrier dynamics of photogenerated holes in hematite for ethanol oxidation and its possible over-oxidation. Ethanol oxidation was found to form acetaldehyde with around 100 % initial selectivity and faradaic efficiency. The overoxidation of acetaldehyde was suppressed by being unable to kinetically compete with ethanol oxidation in terms of turnover frequency by a factor of ten. Temperature-dependent rate law analyses were applied to determine the activation energies of these two oxidations. For the ethanol oxidation, the activation energy was 195 meV, compared to 398 meV for acetaldehyde oxidation. These results were correlated with the valence band potential to elucidate the advantage of using hematite for safer and sustainable value-added aldehyde synthesis compared to the industrial method. The dynamics of ethanol oxidation also addressed the challenges in broad-spectrum deep oxidation of organic compounds in water purification using metal oxides.

Alcohols electrooxidation coupled with H2 production at high current densities promoted by a cooperative catalyst

Electrochemical alcohols oxidation offers a promising approach to produce valuable chemicals and facilitate coupled H2 production. However, the corresponding current density is very low at moderate cell potential that substantially limits the overall productivity. Here we report the electrooxidation of benzyl alcohol coupled with H2 production at high current density (540 mA cm-2 at 1.5 V vs. RHE) over a cooperative catalyst of Au nanoparticles supported on cobalt oxyhydroxide nanosheets (Au/CoOOH). The absolute current can further reach 4.8 A at 2.0 V in a more realistic two-electrode membrane-free flow electrolyzer. Experimental combined with theoretical results indicate that the benzyl alcohol can be enriched at Au/CoOOH interface and oxidized by the electrophilic oxygen species (OH*) generated on CoOOH, leading to higher activity than pure Au. Based on the finding that the catalyst can be reversibly oxidized/reduced at anodic potential/open circuit, we design an intermittent potential (IP) strategy for long-term alcohol electrooxidation that achieves high current density (>250 mA cm-2) over 24 h with promoted productivity and decreased energy consumption.

The solvent-free and aerobic oxidation of benzyl alcohol catalyzed by Pd supported on carbon nitride/CeO2 composites

Palladium catalysts supported on carbon nitride/ceria composites showed superior activity during the solvent-free and aerobic oxidation of benzyl alcohol to benzaldehyde.

Photoelectrocatalytic C-H halogenation over an oxygen vacancy-rich TiO2 photoanode

Photoelectrochemical cells are emerging as powerful tools for organic synthesis. However, they have rarely been explored for C-H halogenation to produce organic halides of industrial and medicinal importance. Here we report a photoelectrocatalytic strategy for C-H halogenation using an oxygen-vacancy-rich TiO2 photoanode with NaX (X=Cl-, Br-, I-). Under illumination, the photogenerated holes in TiO2 oxidize the halide ions to corresponding radicals or X2, which then react with the substrates to yield organic halides. The PEC C-H halogenation strategy exhibits broad substrate scope, including arenes, heteroarenes, nonpolar cycloalkanes, and aliphatic hydrocarbons. Experimental and theoretical data reveal that the oxygen vacancy on TiO2 facilitates the photo-induced carriers separation efficiency and more importantly, promotes halide ions adsorption with intermediary strength and hence increases the activity. Moreover, we designed a self-powered PEC system and directly utilised seawater as both the electrolyte and chloride ions source, attaining chlorocyclohexane productivity of 412 µmol h-1 coupled with H2 productivity of 9.2 mL h-1, thus achieving a promising way to use solar for upcycling halogen in ocean resource into valuable organic halides.

Bi-Functional Fe3 O4 /Au/CoFe-LDH Sandwich-Structured Electrocatalyst for Asymmetrical Electrolyzer with Low Operation Voltage

The reduction of the overall electrolysis potential to produce hydrogen is a critical target for fabricating applicable hydrogen evolution cells. Sandwich-structured Fe₃ O₄ /Au/CoFe-LDH is synthesized via a spontaneous galvanic displacement reaction. A series of structural characterizations indicate the successful synthesis of sandwich-structured Fe₃ O₄ /Au/CoFe-LDH electrocatalyst. The trace amount of Au laying between Fe₃ O₄ and CoFe-LDH significantly improves the intrinsic conductivity and catalytic activity of the composite catalyst. In-depth investigations indicate that Fe₃ O₄ and CoFe-LDH are responsible for the electrocatalytic hydrogen evolution reaction (HER) whereas Au is responsible for the electrocatalytic glucose oxidation (GOR). The electrocatalytic tests indicate Fe₃ O₄ /Au/CoFe-LDH offers excellent electrocatalytic activity and stability for both HER and GOR, even at high current density (i.e., 1000 mA cm^-2 ). Further electrochemistry examinations in a two-compartment cell with a two-electrode configuration show that Fe₃ O₄ /Au/CoFe-LDH can significantly reduce the overall potential for this asymmetrical cell, with only 0.48 and 0.89 V required to achieve 10 mA cm^-2 current density with and without iR-compensation, which is the lowest overall potential requirement ever reported. The design and synthesis of Fe₃ O₄ /Au/CoFe-LDH pave a new way to electrochemically produce hydrogen and gluconate under extremely low cell voltage, which can readily match with a variety of solar cells.