Photocatalytic Platforms for Removal of Ammonia from Gaseous and Aqueous Matrixes: Status and Challenges

Enhanced photocatalytic ammonia oxidation over WO3@TiO2 heterostructures by constructing an interfacial electric field

WO3 nanorods and xWO3@TiO2 (WO3/TiO2 mass ratio (x) = 1-5) photocatalysts were synthesized using the hydrothermal and sol-gel methods, respectively. The photocatalytic activities of xWO3@TiO2 for NH3 oxidation first increased and then decreased with a rise in TiO2 content. Among them, the heterostructured 3WO3@TiO2 photocatalyst showed the highest NH3 conversion (58 %) under the simulated sunlight irradiation, which was about two times higher than those of WO3 and TiO2. Furthermore, the smallest amounts of by-products (i.e., NO and NO2) were produced over 3WO3@TiO2. The enhancement in photocatalytic performance (i.e., NH3 conversion and N2 selectivity) of 3WO3@TiO2 was mainly attributed to the formed interfacial electric field between WO3 and TiO2, which promoted efficient separation and transfer of photogenerated charge carriers. Based on the results of reactive species trapping and active radical detection, photocatalytic oxidation of NH3 over 3WO3@TiO2 was governed by the photogenerated holes and superoxide radicals. This work combines two strategies of morphological regulation and interfacial electric field construction to simultaneously improve light utilization and photogenerated charge separation efficiency, which promotes the development of full-spectrum photocatalysts for the removal of ammonia.

Enhanced photocatalytic ammonia oxidation activity and nitrogen selectivity over Ag/AgCl/N-TiO2 photocatalyst

The removal of ammonia (NH3) emitted from agricultural and industrial activities is of great significance to protect human health and ecological environment. Photocatalytic NH3 oxidation to N2 under mild conditions is a promising strategy. However, developing visible light photocatalysts for NH3 oxidation is still in its infancy. Here, we fabricate N-TiO2 and Ag/AgCl/N-TiO2 photocatalysts by sol-gel and photodeposition methods, respectively. The introduction of N not only endows TiO2 with visible light response (absorption edge at 460 nm) but also results in the formation of heterophase junction (anatase and rutile). Thus, N-TiO2 shows 2.0 and 1.8 times higher than those over anatase TiO2 and commercial TiO2 for NH3 oxidation under full spectrum irradiation. Meanwhile, surface modification of Ag can simultaneously enhance visible light absorption (generating localized surface plasmon resonance effect) and charge separation efficiency. Therefore, the photocatalytic activity of Ag/AgCl/N-TiO2 is further improved. Furthermore, the presence of N and Ag also enhances the selectivity of N2 product owing to the change of reaction pathway. This work simultaneously regulates photocatalytic conversion efficiency and product selectivity, providing some guidance for developing highly efficient photocatalysts for NH3 elimination.

An update on sustainabilities and challenges on the removal of ammonia from aqueous solutions: A state-of-the-art review

An insightful attempt has been made in this review and the primary objective was to meticulously provide an update on the sustainabilities, advances and challenges pertaining the removal of ammonia from water and wastewater. Specifically, ammonia is a versatile compound that prevails in various spheres of the environment, and if not properly managed, this chemical species could pose severe ecological pressure and toxicity to different receiving environments and its biota. The notorious footprints of ammonia could be traced to anoxic conditions, an infestation of aquatic ecosystems, hyperactivity, convulsion, and methaemoglobin, popularly known as the "blue baby syndrome". In this review, latest updates regarding the sustainabilities, advancements and challenges for the removal of ammonia from aqueous solutions, i.e., river and waste waters, are briefly elucidated in light of future perspectives. Viable routes and ideal hotspots, i.e., wastewater and drinking water, for ammonia removal under the cost-effective options have been unpacked. Key mechanisms for the removal of ammonia were grossly bioremediation, oxidation, adsorption, filtration, precipitation, and ion exchange. Finally, this review denoted biological nutrient removal, struvite precipitation, and breakpoint chlorination as the most effective and promising technologies for the removal of ammonia from aquatic environments, although at the expense of energy and operational cost. Lastly, the future perspective, avenues of exploitation, and technical facets that deserve in-depth exploration are duly underscored.

Surface acidic sites strengthened core-shell HC@MnO2 for enhanced gaseous ammonia adsorption

As a common gaseous pollutant in atmospheric environment, ammonia (NH3) not only contributes to the formation of haze, but also disturb the nitrogen balance in ecosystem through atmospheric nitrogen deposition. Therefore, the control of NH3 emission has important environmental significance. Adsorption is the most commonly used technology for NH3 purification in practice, and efficient adsorbents are the key to adsorption method. Herein, a core-shell structured HC@MnO2 adsorbent was constructed by in-situ growth of layered δ-MnO2 on hydrochar (HC) surface, and its surface acidic sites were further strengthened. The enhancement of surface acidic sites significantly improved the adsorption performance of HC@MnO2 for NH3, reaching 34.49 mg NH3/g, which was superior to commercial carbon-based materials (whose adsorption capacity was 8.47 times that of Coal-based activated carbon, 14.25 times that of Coconut shell activated carbon, and 12.77 times that of Bamboo charcoal). Moreover, the operating parameters and adsorption kinetics were detailly investigated. The adsorption of HC@MnO2 on NH3 was in accordance with pseudo-second-order adsorption kinetics model. Large surface area of core-shell structure and abundant surface acidic sites of δ-MnO2 are the decisive reasons for the excellent adsorption performance of HC@MnO2. Importantly, the enhancement of surface stronger Brønsted acidic sites is the key to improve NH3 adsorption performance of HC@MnO2. Finally, the thermal regeneration and recycling performance of HC@MnO2-H were also investigated. This study provides a suggestive for further research on low-cost composite materials with excellent NH3 adsorption performance.

Valorization of Fibrous Plant-Based Food Waste as Biosorbents for Remediation of Heavy Metals from Wastewater-A Review

Mobilization of heavy metals in the environment has been a matter of concern for several decades due to their toxicity for humans, environments, and other living organisms. In recent years, use of inexpensive and abundantly available biosorbents generated from fibrous plant-based food-waste materials to remove heavy metals has garnered considerable research attention. The aim of this review is to investigate the applicability of using fibrous plant-based food waste, which comprises different components such as pectin, hemicellulose, cellulose, and lignin, to remove heavy metals from wastewater. This contribution confirms that plant-fiber-based food waste has the potential to bind heavy metals from wastewater and aqueous solutions. The binding capacities of these biosorbents vary depending on the source, chemical structure, type of metal, modification technology applied, and process conditions used to improve functionalities. This review concludes with a discussion of arguments and prospects, as well as future research directions, to support valorization of fibrous plant-based food waste as an efficient and promising strategy for water purification.

Selective oxidation of ammonia to dinitrogen gas by facile Co2+/PMS/chloridion process through reactive chlorine radicals

The selective oxidation of ammonia to dinitrogen gas in some special wastewater is of paramount significance, but still a challenge. In this study, chlorine radical (Cl•)-mediated oxidation process was developed to realize the selective oxidation of NH₄⁺-N to N₂, in which Cl• was generated in Co²⁺/peroxymonosulfate (PMS)/chloridion (Cl^-) system. The effect of various operational parameters on the efficiency and selectivity of ammonia oxidation to N₂ was investigated, such as PMS concentration, Co²⁺ concentration, Cl^- concentration and pH value. The experiment results showed that Cl•-mediated NH₄⁺-N oxidation reaction exhibited high NH₄⁺-N removal efficiency and considerable selectivity to N₂ in the range of pH from 2.0 to 6.5. The removal efficiency of NH₄⁺-N was 90.39%, and the selectivity of NH₄⁺-N to N₂ achieved up to 97.16%. The possible mechanism for high efficient and selective oxidation of NH₄⁺-N to N₂ was tentatively proposed. The process developed in this study could provide a novel technology for the treatment and selective oxidation of ammonium in some special types of ammonium-containing wastewater.

Visualization of Electrochemically Accessible Sites in Flow-through Mode for Maximizing Available Active Area toward Superior Electrocatalytic Ammonia Oxidation

Active chlorine species-mediated electrocatalytic oxidation is a promising strategy for ammonia removal in decentralized wastewater treatment. Flow-through electrodes (FTEs) provide an ideal platform for this strategy because of enhanced mass transport and sufficient electrochemically accessible sites. However, limited insight into spatial distribution of electrochemically accessible sites within FTEs inhibits the improvement of reactor efficiency and the reduction of FTE costs. Herein, a microfluidic-based electrochemical system is developed for the operando observation of microspatial reactions within pore channels, which reveals that reactions occur only in the surface layer of the electrode thickness. To further quantify the spatial distribution, finite element simulations demonstrate that over 75.0% of the current is accumulated in the 20.0% thickness of the electrode surface. Based on these findings, a gradient-coated method for the active layer was proposed and applied to a Ti/RuO₂ porous electrode with an optimized pore diameter of ∼25 μm, whose electrochemically accessible surface area was 381.7 times that of the planar electrode while alleviating bubble entrapment. The optimized reactor enables complete ammonia removal with an energy consumption of 60.4 kWh kg^-1 N, which was 24.2% and 39.9% less than those with pore diameters of ∼3 μm and ∼90 μm, respectively.

Photocatalytic degradation of gaseous benzene using metal oxide nanocomposites

Rapid industrial growth has been accompanied by the pollution of hazardous volatile organic pollutants (VOCs) in air. Among various options available for the treatment of VOCs, the use of metal oxide composites as photocatalysts has been adopted preferably due to their potential to induce the synergistic interactions between the metal nanoparticles (NPs) and metal oxides (especially titanium dioxide (TiO₂)). In this context, an in-depth review is offered to describe the fundamental mechanism of metal oxide-based photocatalysis for the oxidation of gaseous benzene as a model VOC. The discussion has been extended further to evaluate their performances in terms of key performance metrics (e.g., quantum yield (QY), space-time yield (STY), and figure of merit (FOM)). The TiO₂-based metallic bi-component photocatalysts (e.g., Sr₂CeO₄/TiO₂) generally exhibited better photodegradation efficiency with enhanced light absorption capability than monometallic-TiO₂ (e.g., Pd-TiO₂) composites or other modified photocatalysts (e.g., metal-organic framework (MOF)-based composites). Finally, we address the current challenges and future perspectives in this highly challenging research field.

Photocatalysis and perovskite oxide-based materials: a remedy for a clean and sustainable future

The massive use of non-renewable energy resources by humankind to fulfill their energy demands is causing severe environmental issues. Photocatalysis is considered one of the potential solutions for a clean and sustainable future because of its cleanliness, inexhaustibility, efficiency, and cost-effectiveness. Significant efforts have been made to design highly proficient photocatalyst materials for various applications such as water pollutant degradation, water splitting, CO2 reduction, and nitrogen fixation. Perovskite photocatalyst materials are gained special attention due to their exceptional properties because of their flexibility in chemical composition, structure, bandgap, oxidation states, and valence states. The current review is focused on perovskite materials and their applications in photocatalysis. Special attention has been given to the structural, stoichiometric, and compositional flexibility of perovskite photocatalyst materials. The photocatalytic activity of perovskite materials in different photocatalysis applications is also discussed. Various mechanisms involved in photocatalysis application from wastewater treatment to hydrogen production are also provided. The key objective of this review is to encapsulate the role of perovskite materials in photocatalysis along with their fundamental properties to provide valuable insight for addressing future environmental challenges.

Facile ammonium oxidation to nitrogen gas in acid wastewater by in situ photogenerated chlorine radicals

The treatment of low-concentration ammonium (e.g., <50 mg L^-1) in highly acidic wastewaters through traditional biological nitrification, physical separation, or chemical stripping remains a huge challenge. Herein, we report that photocatalytic ammonium oxidation using bismuth oxychloride (BiOCl) can successfully occur in Cl^--laden solutions within a pH range of 1.0-6.0. All reactions follow pseudo-zero-order kinetics (with rate constants of 0.27-0.32 mg L^-1 min^-1 at pH 2.0-6.0 and 0.14 mg L^-1 min^-1 at pH 1.0), indicating the saturation of reactive species by the reactants. The interlayer is self-oxidized by the valence band holes (VB h⁺), resulting in the formation of Cl^• and subsequently HClO, which is excited upon UV irradiation to provoke consecutive photoreactions for chlorine radical generation. Compared to the free chlorine, HO^•, Cl^•, and Cl₂^•-, the ClO^• produced using the UV/BiOCl system plays a predominant role in oxidizing ammonium under acidic conditions. BiOCl exhibits good stability because of the compensation of Cl^- from solution and maintains high activity under different conditions (i.e., different cations and co-existing anions, temperatures, and initial substrate concentrations). The successful removal of ammonium from real wastewater using the UV/BiOCl system suggests that this is a promising method for treating diluted ammonium under highly acidic conditions.

Heterojunction photocatalysts for degradation of the tetracycline antibiotic: a review

Antibiotic pollution is a major health issue inducing antibiotic resistance and the inefficiency of actual drugs, thus calling for improved methods to clean water and wastewater. Here we review the recent development of heterojunction photocatalysis and application in degrading tetracycline. We discuss mechanisms for separating photogenerated electron-hole pairs in different heterojunction systems such as traditional, p-n, direct Z-scheme, step-scheme, Schottky, and surface heterojunction. Degradation pathways of tetracycline during photocatalysis are presented. We compare the efficiency of tetracycline removal by various heterojunctions using quantum efficiency, space time yield, and figures of merit. Implications for the treatment of antibiotic-contaminated wastewater are discussed.

Metal–organic framework micromotors: perspectives for environmental applications

Metal–organic framework micromotors possessing a self-propulsion system have been proposed as a new generation of advanced materials for various environmental applications.

Photocatalytic reaction mechanisms at the gas–solid interface for environmental and energy applications

Five gas–solid photocatalytic reactions including the oxidation of NOx, VOCs and NH3, and reduction of CO2 and N2 are summarized. Besides, basic properties of gas molecules, their adsorption and activation, and various reaction pathways are analyzed.