Carbon-Based Materials for Electrochemical Reduction of CO2 to C2+ Oxygenates: Recent Progress and Remaining Challenges

Electrochemical CO2 Reduction on Cu-Based Monatomic Alloys: A DFT Study

In recent years, single-atom alloy catalysts (SAAs) have received much attention due to the combination of structural features of both single-atom and alloy catalysts, as well as their efficient catalytic activity, high selectivity, and high stability in various chemical reactions. In this work, we designed a series of Cu-based SAAs by doping isolated 3d transition metal (TM1) atoms on the surface of Cu(111) (TM1 = Fe, Co, Ru, Rh, Os and Ir), in which Ir1/Cu(111) SAAs are considered to be the most stable among 3d-series SAAs due to their optimal binding energy (Eb). The density of states of SAAs have been systematically investigated to further discuss structural properties. Based on density functional theory calculations, the activity and selectivity of Ir1/Cu(111) SAAs are investigated for electrocatalytic CO2 reduction reaction (CO2RR). The initial hydrogenation of CO2 on Ir1/Cu(111) SAAs can form *CO intermediates, which will be further to CH4 production by the pathway of *CO → *CHO → *CHOH → *CH2OH → *CH2 → *CH3 → CH4. This study provides theoretical insights for the rational design of selective Cu-based monatomic alloy catalysts.

Reactive capture and electrochemical conversion of CO2 with ionic liquids and deep eutectic solvents

Ionic liquids (ILs) and deep eutectic solvents (DESs) have tremendous potential for reactive capture and conversion (RCC) of CO2 due to their wide electrochemical stability window, low volatility, and high CO2 solubility. There is environmental and economic interest in the direct utilization of the captured CO2 using electrified and modular processes that forgo the thermal- or pressure-swing regeneration steps to concentrate CO2, eliminating the need to compress, transport, or store the gas. The conventional electrochemical conversion of CO2 with aqueous electrolytes presents limited CO2 solubility and high energy requirement to achieve industrially relevant products. Additionally, aqueous systems have competitive hydrogen evolution. In the past decade, there has been significant progress toward the design of ILs and DESs, and their composites to separate CO2 from dilute streams. In parallel, but not necessarily in synergy, there have been studies focused on a few select ILs and DESs for electrochemical reduction of CO2, often diluting them with aqueous or non-aqueous solvents. The resulting electrode-electrolyte interfaces present a complex speciation for RCC. In this review, we describe how the ILs and DESs are tuned for RCC and specifically address the CO2 chemisorption and electroreduction mechanisms. Critical bulk and interfacial properties of ILs and DESs are discussed in the context of RCC, and the potential of these electrolytes are presented through a techno-economic evaluation.

Linkage Engineering in Covalent Organic Frameworks for Metal-Free Electrocatalytic C2H4 Production from CO2

Electrocatalytic carbon dioxide reduction reaction (CO2RR) to produce ethylene (C2H4) is conducive to sustainable development of energy and environment. At present, most electrocatalysts for C2H4 production are limited to the heavy metal copper, meanwhile, achieving metal-free catalysis remains a challenge. Noted piperazine with sp3 N hybridization is beneficial to CO2 capture, but CO2RR performance and mechanism have been lacking. Herein, based on linkage engineering, we construct a novel high-density sp3 N catalytic array via introducing piperazine into the crystalline and microporous aminal-linked covalent organic frameworks (COFs). Thanks to its high sp3 N density, strong CO2 capture capacity and great hydrophilicity, aminal-linked COF successfully achieves the conversion of CO2 to C2H4 with a Faraday efficiency up to 19.1 %, which is stand out in all reported metal-free COF electrocatalysts. In addition, a series of imine-linked COFs are synthesized and combined with DFT calculations to demonstrate the critical role of sp3 N in enhancing the kinetics of CO2RR. Therefore, this work reveals the extraordinary potential of linkage engineering in COFs to break through some catalytic bottlenecks.

Low-coordinated copper facilitates the *CH2CO affinity at enhanced rectifying interface of Cu/Cu2O for efficient CO2-to-multicarbon alcohols conversion

The carbon-carbon coupling at the Cu/Cu2O Schottky interface has been widely recognized as a promising approach for electrocatalytic CO2 conversion into value-added alcohols. However, the limited selectivity of C2+ alcohols persists due to the insufficient control over rectifying interface characteristics required for precise bonding of oxyhydrocarbons. Herein, we present an investigation into the manipulation of the coordination environment of Cu sites through an in-situ electrochemical reconstruction strategy, which indicates that the construction of low-coordinated Cu sites at the Cu/Cu2O interface facilitates the enhanced rectifying interfaces, and induces asymmetric electronic perturbation and faster electron exchange, thereby boosting C-C coupling and bonding oxyhydrocarbons towards the nucleophilic reaction process of *H2CCO-CO. Impressively, the low-coordinated Cu sites at the Cu/Cu2O interface exhibit superior faradic efficiency of 64.15  ±  1.92% and energy efficiency of ~39.32% for C2+ alcohols production, while maintaining stability for over 50 h (faradic efficiency >50%, total current density = 200 mA cm-2) in a flow-cell electrolyzer. Theoretical calculations, operando synchrotron radiation Fourier transform infrared spectroscopy, and Raman experiments decipher that the low-coordinated Cu sites at the Cu/Cu2O interface can enhance the coverage of *CO and adsorption of *CH2CO and CH2CHO, facilitating the formation of C2+ alcohols.

Enhancing C2+ product selectivity in CO2 electroreduction by enriching intermediates over carbon-based nanoreactors

Electrochemical CO2 reduction reaction (CO2RR) to multicarbon (C2+) products faces challenges of unsatisfactory selectivity and stability. Guided by finite element method (FEM) simulation, a nanoreactor with cavity structure can facilitate C-C coupling by enriching *CO intermediates, thus enhancing the selectivity of C2+ products. We designed a stable carbon-based nanoreactor with cavity structure and Cu active sites. The unique geometric structure endows the carbon-based nanoreactor with a remarkable C2+ product faradaic efficiency (80.5%) and C2+-to-C1 selectivity (8.1) during the CO2 electroreduction. Furthermore, it shows that the carbon shell could efficiently stabilize and highly disperse the Cu active sites for above 20 hours of testing. A remarkable C2+ partial current density of-323 mA cm-2 was also achieved in a flow cell device. In situ Raman spectra and density functional theory (DFT) calculation studies validated that the *COatop intermediates are concentrated in the nanoreactor, which reduces the free energy of C-C coupling. This work unveiled a simple catalyst design strategy that would be applied to improve C2+ product selectivity and stability by rationalizing the geometric structures and components of catalysts.

Recent advance of nanomaterials modified electrochemical sensors in the detection of heavy metal ions in food and water

As one of the main pollutants, heavy metal ions can accumulate in the human body and cause a cascade of damage. Electrochemical sensors provide great prospects for tracing heavy metal ions because of their properties of high sensitivity, low detection limits and fast response. Electrode surface modification materials play a key role in enhancing the performance of electrochemical sensors. Herein, we summarize in detail the recent work on electrochemical sensors modified by carbon nanomaterials (graphene and its derivatives, carbon nanofibers and carbon nanotubes), metal nanomaterials (gold, silver, bismuth and iron), complexes (MOFs, ZIFs and MXenes) and their composites for the detection of heavy metal ions (mainly include Cd(II), Hg(II), Pb(II), As(III), Cu(II) and Zn(II)) in food and water. The synthetic strategies, mechanisms, innovations, advantages, challenges and prospects of various electrode modification nanomaterials for the detection of heavy metal ions in food and water are discussed.

Strategies for Enhancing the Photocatalytic and Electrocatalytic Efficiency of Covalent Triazine Frameworks for CO2 Reduction

Converting carbon dioxide (CO2) into fuel and high-value-added chemicals is considered a green and effective way to solve global energy and environmental problems. Covalent triazine frameworks (CTFs) are extensively utilized as an emerging catalyst for photo/electrocatalytic CO2 reduction reaction (CO2RR) recently recognized for their distinctive qualities, including excellent thermal and chemical stability, π-conjugated structure, rich nitrogen content, and a strong affinity for CO2, etc. Nevertheless, single-component CTFs have the problems of accelerated recombination of photoexcited electron-hole pairs and restricted conductivity, which limit their application for photo/electrocatalytic CO2RR. Therefore, emphasis will then summarize the strategies for enhancing the photocatalytic and electrocatalytic efficiency of CTFs for CO2RR in this paper, including atom doping, constructing a heterojunction structure, etc. This review first illustrates the synthesis strategies of CTFs and the advantages of CTFs in the field of photo/electrocatalytic CO2RR. Subsequently, the mechanism of CTF-based materials in photo/electrocatalytic CO2RR is described. Lastly, the challenges and future prospects of CTFs in photo/electrocatalytic CO2RR are addressed, which offers a fresh perspective for the future development of CTFs in photo/electrocatalytic CO2RR.

Efficient photoreduction of carbon dioxide to ethanol using diatomic nitrogen-doped black phosphorus

Successful conversion of CO2 into C2 products requires the development of new catalysts that overcome the difficulties in efficient light harvesting and CO-CO coupling. Herein, density functional theory (DFT) is used to assess the photoreduction properties of nitrogen-doped black phosphorus. The geometric structure, redox potential, first step of hydrogenation activation, CO desorption, and CO-CO coupling are systematically calculated, based on which the diatomic nitrogen-doped black phosphorus (N2@BPV) stands out. The calculated results of the CO2RR pathway demonstrate that N2@BPV has excellent selectivity and high activity for CH3CH2OH production. The results of the time-dependent ab initio nonadiabatic molecular dynamics simulation show that the diatomic N active sites of N2@BPV facilitate charge separation and inhibit electron-hole recombination. In addition, the activation mechanism of CO2 is studied. The main reason for CO2 activation is attributed to the imbalance in electron transfer that destroys the symmetry of CO2. We expect that our study will offer some theoretical guidance in CO2 conversion.

Screening Efficient C-N Coupling Catalysts for Electrosynthesis of Acetamide and Output Ammonia through a Cascade Strategy of Electrochemical CO2 and N2 Reduction Using Cu-Based Nitrogen-Carbon Nanosheets

Due to the limitation of the high-value-added products obtained from electrocatalytic CO2 reduction within an acid environment, introducing additional elements can expand the diversity of the products obtained during the CO2 reduction reaction (CO2RR) and nitrogen reduction reaction (NRR). Thus, coelectroreduction of CO2 and N2 is a new strategy for producing acetamide (CH3CONH2) via both C-C and C-N bond coupling using Cu-based nitrogen-carbon nanosheets. CO2 can reduce to CO, and a key ketene (*C═C═O) can be generated from *CO*CO dimerization; this ketene is postulated as an intermediate in the formation of acetamide. However, most studies focus on promoting the C-C bond formation. Here, we propose that C-N bond coupling can form acetamide through the interaction of *C═C═O with NH3. The acetamide is formed via a nucleophilic attack between *NH3 and the *C═C═O intermediate. The C-N coupling mechanism was successfully applied to expand the variety of nitrogen-containing products obtained from CO2 and N2 coreduction. Thus, we successfully screened Cu2-based graphite and Cu-based C3N4 as catalysts that can produce C2+ compounds by integrating CO dimerization with acetamide synthesis. In addition, we observed that Cu2-based C2N and Cu-based C3N4 catalysts are suitable for the NRR. Cu-based C3N4 showed high CO2RR and NRR activities with small negative limiting potential (UL) values of -0.83 and -0.58 V compared to those of other candidates, respectively. The formation of *COHCOH from *COHCO was considered the rate-determining step (RDS) during acetamide electrosynthesis. The limiting potential value of Cu2-based C2N was only -0.46 V for NH3 synthesis, and the formation of *NNH was via the RDS via an alternating path. The adsorption energy difference analysis both CO2 and N2 compare with the hydrogen evolution reaction (HER), suggesting that Cu2-based C2N exhibited the highest CO2RR and NRR selectivity among the 13 analyzed catalysts. The results of this study provide innovative insights into the design principle of Cu-based nitrogen-carbon electrocatalysts for generating highly efficient C-N coupling products.

C2 Product Formation over the C1 Product and HER on the 111 Plane of Specific Cu Alloy Nanoparticles Identified through Multiparameter Optimization

C2 products are more desirable than C1 products during CO2 electroreduction (CO2ER) because the former possess higher energy density and greater industrial value. For CO2ER, Cu is a well-known catalyst, but the selectivity toward C2 products is still a big challenge for researchers due to complex intermediates, different final products, and large space of the catalyst due to its morphology, plane, size, host surface etc. Using density functional theory (DFT) calculations, we find that alloying of Cu nanoparticles can help to enhance the selectivity toward C2 products during CO2ER with a low overpotential. By a systematic investigation of 111 planes (which prefer the C1 product in the case of bulk Cu), the alloys show the generation of C2 products via *CO-*CO dimerization (* indicates adsorbed state). It also suppresses the counter-pathway of hydrogenation of *CO to *CHO, which leads to C1 products. Further, we find that *CH2CHO is the bifurcating intermediate to distinguish between ethanol and ethylene as the final product. We have used simple graphical construction to identify the catalyst for CO2ER over HER, and vice versa. We have also defined the case of hydrogen poisoning and projected a parity plot to recognize the catalyst for C2 product evolution over the C1 product. Our study reveals that Cu-Ag and Cu-Zn catalysts selectively promote ethanol production on 111 planes. Moreover, an edge-doped 2SO2 graphene nanoribbon as the host layer further lowers the barrier and selectively promotes ethanol on Cu38- and Cu79-based alloys. This work provides new theoretical insights into designing Cu-based nanoalloy catalysts for C2 product formation on the 111 plane.

Polymer Modification Strategy to Modulate Reaction Microenvironment for Enhanced CO2 Electroreduction to Ethylene

Modulation of the microenvironment on the electrode surface is one of the effective means to improve the efficiency of electrocatalytic carbon dioxide reduction (eCO2 RR). To achieve high conversion rates, the phase boundary at the electrode surface should be finely controlled to overcome the limitation of CO2 solubility in the aqueous electrolyte. Herein, we developed a simple and efficient method to structure electrocatalyst with a superhydrophobic surface microenvironment by one-step co-electrodeposition of Cu and polytetrafluoroethylene (PTFE) on carbon paper. The super-hydrophobic Cu-based electrode displayed a high ethylene (C2 H4 ) selectivity with a Faraday efficiency (FE) of 67.3 % at -1.25 V vs. reversible hydrogen electrode (RHE) in an H-type cell, which is 2.5 times higher than a regular Cu electrode without PTFE. By using PTFE as a surface modifier, the activity of eCO2 RR is enhanced and water (proton) adsorption is inhibited. This strategy has the potential to be applied to other gas-conversion electrocatalysts.

Anode Reaction Control for a Single-Compartment Electrochemical CO2 Reduction Reactor with a Surface-Activated Diamond Cathode

The electrochemical reaction of carbon dioxide (CO2 ) in aqueous electrolyte solutions is attracting increasing attention for sustainable chemical production. Boron-doped diamond (BDD) electrodes have been previously shown to be very effective for the stable electrochemical production of formic acid from CO2 . Typically, the electrochemical production of formic acid by CO2 reduction (CO2 R) reaction is performed with a dual-compartment flow reactor equipped with a membrane separator. The problems caused by the membrane separator, such as scaling-up, complicated operational control and materials costs can be solved using a membrane free single-compartment reactor. Here we demonstrate anode reaction control for a single-compartment CO2 R flow reactor using a surface-activated BDD cathode and achieve a Faradaic efficiency for formic acid production of over 70 %.

Piezo-photocatalysis for efficient charge separation to promote CO2 photoreduction in nanoclusters

The substantial emissions of CO2 greenhouse gases have resulted in severe environmental problems, and research on the implementation of semiconductor materials to minimize CO2 is currently a highly discussed subject. Effective separation of interface charges is a major challenge for efficient piezo-photocatalytic systems. Meanwhile, the ultrasmall-sized metal nanoclusters can shorten the distance of electron transport. Herein, we synthesized Au25(p-MBA)18 nanoclusters (Au25 NCs) modified red graphitic carbon nitride (RCN) nanocatalysts with highly exposed Au active sites by in-situ seed growth method. The loading of Au25 NCs on the RCN surface provides more active sites and creates a long-range ordered electric field. It allows for the direct utilization of the piezoelectric field to separate photogenerated carriers during photo-piezoelectric excitation. Based on the above advantages, the rate of CO2 reduction to CO over Au25 NCs/RCN (111.95 μmol g-1 h-1) was more than triple compared to that of pristine RCN. This paper has positive implication for further application of metal clusters loaded semiconductor for piezo-photocatalytic CO2 reduction.

Direct Electrochemical Synthesis of Acetamide from CO2 and N2 on a Single-Atom Alloy Catalyst

The electrochemical conversion of carbon dioxide into value-added compounds not only paves the way toward a sustainable society but also unlocks the potential for electrocatalytic synthesis of amides through the introduction of N atoms. However, it also poses one of the greatest challenges in catalysis: achieving simultaneous completion of C-C coupling and C-N coupling. Here, we have meticulously investigated the catalytic prowess of Cu-based single-atom alloys in facilitating the electrochemical synthesis of acetamide from CO2 and N2. Through a comprehensive screening process encompassing catalyst stability, adsorption capability, and selectivity against the HER, W/Cu(111) SAA has emerged as an auspicious contender. The reaction entails CO2 reduction to CO, C-C coupling leading to the formation of a ketene intermediate *CCO, N2 reduction, and C-N coupling between NH3 and *CCO culminating in the production of acetamide. The W/Cu(111) surface not only exhibits exceptional activity in the formation of acetamide, with a barrier energy of 0.85 eV for the rate-determining CO hydrogenation step, but also effectively suppresses undesired side reactions leading to various C1 and C2 byproducts during CO2 reduction. This work presents a highly effective approach for forming C-C and C-N bonds via coelectroreduction of CO2 and N2, illuminating the reaction mechanism underlying acetamide synthesis from these two gases on single-atom alloy catalysts. The catalyst design strategy employed in this study has the potential to be extended to a range of amide chemicals, thereby broadening the scope of products that can be obtained through CO2/N2 reduction.

Al-Sehemi A, Alargarsamy S, Gajendran P, Ramachandran R. Development of Different Kinds of Electrocatalyst for the Electrochemical Reduction of Carbon Dioxide Reactions: An Overview

Significant advancements have been made in the development of CO2 reduction processes for applications such as electrosynthesis, energy storage, and environmental remediation. Several materials have demonstrated great potential in achieving high activity and selectivity for the desired reduction products. Nevertheless, these advancements have primarily been limited to small-scale laboratory settings, and the considerable technical obstacles associated with large-scale CO2 reduction have not received sufficient attention. Many of the researchers have been faced with persistent challenges in the catalytic process, primarily stemming from the low Faraday efficiency, high overpotential, and low limiting current density observed in the production of the desired target product. The highlighted materials possess the capability to transform CO2 into various oxygenates, including ethanol, methanol, and formates, as well as hydrocarbons such as methane and ethane. A comprehensive summary of the recent research progress on these discussed types of electrocatalysts is provided, highlighting the detailed examination of their electrocatalytic activity enhancement strategies. This serves as a valuable reference for the development of highly efficient electrocatalysts with different orientations. This review encompasses the latest developments in catalyst materials and cell designs, presenting the leading materials utilized for the conversion of CO2 into various valuable products. Corresponding designs of cells and reactors are also included to provide a comprehensive overview of the advancements in this field.

Bimetallic RuNi Electrocatalyst Coated MWCNTs Cathode for an Efficient and Stable Li-CO2 and Li-CO2 Mars Batteries Performance with Low Overpotential

Rechargeable lithium-CO2 (Li-CO2 ) batteries are an attractive energy storage technology that can reduce fossil fuel usage and limit the adverse environmental impact of CO2 emissions. However, the high charge overpotential, unstable cycling, and incomplete understanding of the electrochemical process limit its advancement for practical applications. Herein, we develop a Li-CO2 battery by designing a bimetallic ruthenium-nickel catalyst onto multi-walled carbon nanotubes (RuNi/MWCNTs) catalyst as cathode by solvothermal method, which exhibits a lower overpotential of 1.15 V and a discharge capacity of 15,165 mAh g-1 with outstanding coulombic efficiency of 97.4 %. The battery can also operate at high rates and have a stable cycle of more than 80 cycles at a current density of 200 mA g-1 with a fixed 500 mAh g-1 capacity. Furthermore, Mars exploration is made feasible with the Li-CO2 Mars battery composed of the RuNi/MWCNTs as cathode catalyst, which performs very similarly to that of pure CO2 atmosphere. This approach may simplify the process of developing high-performance Li-CO2 batteries to achieve carbon negativity on Earth and for future interplanetary Mars missions.

Theoretical Study of the Defects and Doping in Tuning the Electrocatalytic Activity of Graphene for CO2 Reduction

The application of graphene-based catalysts in the electrocatalytic CO2 reduction reaction (ECO2RR) for mitigating the greenhouse effect and energy shortage is a growing trend. The unique and extraordinary properties of graphene-based catalysts, such as low cost, high electrical conductivity, structural tunability, and environmental friendliness, have rendered them promising materials in this area. By doping heteroatoms or artificially inducing defects in graphene, its catalytic performance can be effectively improved. In this work, the mechanisms underlying the CO2 reduction reaction on 10 graphene-based catalysts were systematically studied. N/B/O-codoped graphene with a single-atom vacancy defect showed the best performance and substantial improvement in catalytic activity compared with pristine graphene. The specific roles of the doped elements, including B, N, and O, as well as the defects, are discussed in detail. By analysing the geometric and electronic structures of the catalysts, we showed how the doped heteroatoms and defects influence the catalytic reaction process and synergistically promoted the catalytic efficiency of graphene.

Unlocking full and fast conversion in photocatalytic carbon dioxide reduction for applications in radio-carbonylation

Harvesting sunlight to drive carbon dioxide (CO₂) valorisation represents an ideal concept to support a sustainable and carbon-neutral economy. While the photochemical reduction of CO₂ to carbon monoxide (CO) has emerged as a hot research topic, the full CO₂-to-CO conversion remains an often-overlooked criterion that prevents a productive and direct valorisation of CO into high-value-added chemicals. Herein, we report a photocatalytic process that unlocks full and fast CO₂-to-CO conversion (<10 min) and its straightforward valorisation into human health related field of radiochemistry with carbon isotopes. Guided by reaction-model-based kinetic simulations to rationalize reaction optimisations, this manifold opens new opportunities for the direct access to ¹¹C- and ¹⁴C-labeled pharmaceuticals from their primary isotopic sources [¹¹C]CO₂ and [¹⁴C]CO₂.

Tuning the Hydroxyl Density of MXene to Regulate the Electrochemical Performance of Anchored Cobalt Phthalocyanine for CO2 Reduction

Precise electronic state regulation through coordination environment optimization by metal-support interaction is a promising strategy to facilitate catalysis reaction, while the limited density of functional groups in the bulk substrate restricts the regulation degree. Herein, different sizes of Ti₃C₂T_x MXene with hydroxyl (-OH) terminal including the MXene layer (ML-OH, 3 μm), the MXene nanosheet (MNS-OH, 600 nm), and the MXene quantum dot (MQD-OH, 8 nm) were prepared to anchor CoPc, and the effect of -OH density on the performance of electrochemical CO₂ reduction was systematically investigated. Notably, a linear relationship was established by plotting reactivity vs hydroxyl density. With the highest -OH density, CoPc/MQD-OH exhibits a superior Faradaic efficiency for CO formation (FE_CO) of ∼100% at -0.9 to -1.0 V vs RHE and a high FE_CO of >90% over a wide potential window from -0.8 to -1.4 V. The mechanism exploration shows that the axial coordination interaction of the -OH terminal with Co increases the electron density of the Co site, thus promoting the adsorption and activation of CO₂. This work provides a new insight into designing of molecular catalysts with high efficiency and tunable structure for other electrochemical conversions.

Revisiting the Role of Discharge Products in Li-CO2 Batteries

Rechargeable lithium-carbon dioxide (Li-CO2 ) batteries are promising devices for CO2 recycling and energy storage. However, thermodynamically stable and electrically insulating discharge products (DPs) (e.g., Li2 CO3 ) deposited at cathodes require rigorous conditions for completed decomposition, resulting in large recharge polarization and poor battery reversibility. Although progress has been achieved in cathode design and electrolyte optimization, the significance of DPs is generally underestimated. Therefore, it is necessary to revisit the role of DPs in Li-CO2 batteries to boost overall battery performance. Here, a critical and systematic review of DPs in Li-CO2 batteries is reported for the first time. Fundamentals of reactions for formation and decomposition of DPs are appraised; impacts on battery performance including overpotential, capacity, and stability are demonstrated; and the necessity of discharge product management is highlighted. Practical in situ/operando technologies are assessed to characterize reaction intermediates and the corresponding DPs for mechanism investigation. Additionally, achievable control measures to boost the decomposition of DPs are evidenced to provide battery design principles and improve the battery performance. Findings from this work will deepen the understanding of electrochemistry of Li-CO2 batteries and promote practical applications.

Cutting-Edge Electrocatalysts for CO2RR

A world-wide growing concern relates to the rising levels of CO₂ in the atmosphere that leads to devastating consequences for our environment. In addition to reducing emissions, one alternative strategy is the conversion of CO₂ (via the CO₂ Reduction Reaction, or CO₂RR) into added-value chemicals, such as CO, HCOOH, C₂H₅OH, CH₄, and more. Although this strategy is currently not economically feasible due to the high stability of the CO₂ molecule, significant progress has been made to optimize this electrochemical conversion, especially in terms of finding a performing catalyst. In fact, many noble and non-noble metal-based systems have been investigated but achieving CO₂ conversion with high faradaic efficiency (FE), high selectivity towards specific products (e.g., hydrocarbons), and maintaining long-term stability is still challenging. The situation is also aggravated by a concomitant hydrogen production reaction (HER), together with the cost and/or scarcity of some catalysts. This review aims to present, among the most recent studies, some of the best-performing catalysts for CO₂RR. By discussing the reasons behind their performances, and relating them to their composition and structural features, some key qualities for an "optimal catalyst" can be defined, which, in turn, will help render the conversion of CO₂ a practical, as well as economically feasible process.

Electrochemical Aptasensor Based on ZnO-Au Nanocomposites for the Determination of Ochratoxin A in Wine and Beer

Ochratoxin A (OTA) is positively correlated with an increased risk of developing cancer in nephrotoxic and hepatotoxic patients. Therefore, it is of great significance for the highly sensitive, highly selective, and timely detection of OTA. We described here an electrochemical aptasensor for OTA analysis, which took advantage of the favorable properties of gold nanoparticles (AuNPs) functionalized zinc oxide (ZnO) composites and the intercalative binding between methylene blue (MB) and nucleic acid. There were two label-free aptamers: one to capture OTA and another serving as complementary DNA (cDNA), enabling connection to the ZnO-Au composite’s immobilized electrode. Once OTA was present, the aptamer could capture OTA and detach from the electrode interface, thus, preventing MB from accessing electrode surface for efficient electron transfer; a decreased peak current was monitored by differential pulse voltammetry. The aptasensor presented nice analytical performance for OTA detection in the range of 0.1–30,000 pg·mL−1, with a detection limit of 0.05 pg·mL−1. Moreover, the developed biosensor could be applied to actual sample (wine and beer) analysis.

Bioinspired and Bioderived Aqueous Electrocatalysis

The development of efficient and sustainable electrochemical systems able to provide clean-energy fuels and chemicals is one of the main current challenges of materials science and engineering. Over the last decades, significant advances have been made in the development of robust electrocatalysts for different reactions, with fundamental insights from both computational and experimental work. Some of the most promising systems in the literature are based on expensive and scarce platinum-group metals; however, natural enzymes show the highest per-site catalytic activities, while their active sites are based exclusively on earth-abundant metals. Additionally, natural biomass provides a valuable feedstock for producing advanced carbonaceous materials with porous hierarchical structures. Utilizing resources and design inspiration from nature can help create more sustainable and cost-effective strategies for manufacturing cost-effective, sustainable, and robust electrochemical materials and devices. This review spans from materials to device engineering; we initially discuss the design of carbon-based materials with bioinspired features (such as enzyme active sites), the utilization of biomass resources to construct tailored carbon materials, and their activity in aqueous electrocatalysis for water splitting, oxygen reduction, and CO₂ reduction. We then delve in the applicability of bioinspired features in electrochemical devices, such as the engineering of bioinspired mass transport and electrode interfaces. Finally, we address remaining challenges, such as the stability of bioinspired active sites or the activity of metal-free carbon materials, and discuss new potential research directions that can open the gates to the implementation of bioinspired sustainable materials in electrochemical devices.

Lignin-Based Materials for Additive Manufacturing: Chemistry, Processing, Structures, Properties, and Applications

The utilization of lignin, the most abundant aromatic biomass component, is at the forefront of sustainable engineering, energy, and environment research, where its abundance and low-cost features enable widespread application. Constructing lignin into material parts with controlled and desired macro- and microstructures and properties via additive manufacturing has been recognized as a promising technology and paves the way to the practical application of lignin. Considering the rapid development and significant progress recently achieved in this field, a comprehensive and critical review and outlook on three-dimensional (3D) printing of lignin is highly desirable. This article fulfils this demand with an overview on the structure of lignin and presents the state-of-the-art of 3D printing of pristine lignin and lignin-based composites, and highlights the key challenges. It is attempted to deliver better fundamental understanding of the impacts of morphology, microstructure, physical, chemical, and biological modifications, and composition/hybrids on the rheological behavior of lignin/polymer blends, as well as, on the mechanical, physical, and chemical performance of the 3D printed lignin-based materials. The main points toward future developments involve hybrid manufacturing, in situ polymerization, and surface tension or energy driven molecular segregation are also elaborated and discussed to promote the high-value utilization of lignin.

Low Overpotential Electrochemical Reduction of CO2 to Ethanol Enabled by Cu/CuxO Nanoparticles Embedded in Nitrogen-Doped Carbon Cuboids

The electrochemical conversion of CO₂ into value-added chemicals is a promising approach for addressing environmental and energy supply problems. In this study, electrochemical CO₂ catalysis to ethanol is achieved using incorporated Cu/Cu_xO nanoparticles into nitrogenous porous carbon cuboids. Pyrolysis of the coordinated Cu cations with nitrogen heterocycles allowed Cu nanoparticles to detach from the coordination complex but remain dispersed throughout the porous carbon cuboids. The heterogeneous composite Cu/Cu_xO-PCC-0h electrocatalyst reduced CO₂ to ethanol at low overpotential in 0.5 M KHCO₃, exhibiting maximum ethanol faradaic efficiency of 50% at -0.5 V vs. reversible hydrogen electrode. Such electrochemical performance can be ascribed to the synergy between pyridinic nitrogen species, Cu/Cu_xO nanoparticles, and porous carbon morphology, together providing efficient CO₂ diffusion, activation, and intermediates stabilization. This was supported by the notably high electrochemically active surface area, rich porosity, and efficient charge transfer properties.

Enhanced Heterogeneous Fenton-like Process for Sulfamethazine Removal via Dual-Reaction-Center Fe-Mo/rGO Catalyst

A heterogeneous Fenton-like catalyst with single redox site has a rate-limiting step in oxidant activation, which limited its application in wastewater purification. To overcome this, a bimetallic doping strategy was designed to prepare a heterogeneous Fenton-like catalyst (Fe-Mo/rGO) with a double-reaction center. Combined with electrochemical impedance spectroscopy and density functional theory calculation, it was confirmed that the formation of an electron-rich Mo center and an electron-deficient Fe center through the constructed Fe-O-Mo and Mo-S-C bonding bridges induced a higher electron transfer capability in the Fe-Mo/rGO catalyst. The designed Fe-Mo/rGO catalyst exhibited excellent sulfamethazine (SMT) degradation efficiency in a broad pH range (4.8-8.4). The catalytic performance was hardly affected by inorganic anions (Cl^-, SO₄^2- and HCO₃^-) in the complicated and variable water environment. Compared to Fe/rGO and Mo/rGO catalysts, the SMT degradation efficiency increased by about 14.6 and 1.6 times in heterogeneous Fenton-like reaction over Fe-Mo/rGO catalyst. The electron spin resonance and radical scavenger experiments proved that ·O₂^-/HO₂· and ¹O₂ dominate the SMT removal in the Fe-Mo/rGO/H₂O₂ system. Fe and Mo, as active centers co-supported on rGO, significantly enhanced the electron transfer between catalyst, oxidant, and pollutants, which accelerated the reactive oxygen species generation and effectively improved the SMT degradation. Our findings offer a novel perspective to enhance the performance of heterogeneous Fenton-like catalysts by accelerating the electron transfer rate in the degradation of organic pollutants.

Carbon fixation of CO2 via cyclic reactions with borane in gaseous atmosphere leading to formic acid (and metaboric acid); A potential energy surface (PES) study

Carbon dioxide (CO₂), a stable gaseous species, occupies the troposphere layer of the atmosphere. Following it, the environment gets warmer, and the ecosystem changes as a consequence of disrupting the natural order of our life. Due to this, in the present reasearch, the possibility of carbon fixation of CO₂ by using borane was investigated. To conduct this, each of the probable reaction channels between borane and CO₂ was investigated to find the fate of this species. The results indicate that among all the channels, the least energetic path for the reaction is reactant complex (RC) to TS (A-1) to Int (A-1) to TS (A-D) to formic acid (and further meta boric acid production from the transformation of boric acid). It shows that use of gaseous borane might lead to controlling these dangerous greenhouse gases which are threatening the present form of life on Earth, our beautiful, fragile home.

Engineering the Interfacial Microenvironment via Surface Hydroxylation to Realize the Global Optimization of Electrochemical CO2 Reduction

The adsorption and activation of CO₂ on the electrode interface is a prerequisite and key step for electrocatalytic CO₂ reduction reaction (eCO₂ RR). Regulating the interfacial microenvironment to promote the adsorption and activation of CO₂ is thus of great significance to optimize overall conversion efficiency. Herein, a CO₂-philic hydroxyl coordinated ZnO (ZnO-OH) catalyst is fabricated, for the first time, via a facile MOF-assisted method. In comparison to the commercial ZnO, the as-prepared ZnO-OH exhibits much higher selectivity toward CO at lower applied potential, reaching a Faradaic efficiency of 85% at -0.95 V versus RHE. To the best of our knowledge, such selectivity is one of the best records in ZnO-based catalysts reported till date. Density functional theory calculations reveal that the coordinated surficial -OH groups are not only favorable to interact with CO₂ molecules but also function in synergy to decrease the energy barrier of the rate-determining step and maintain a higher charge density of potential active sites as well as inhibit undesired hydrogen evolution reaction. Our results indicate that engineering the interfacial microenvironment through the introduction of CO₂-philic groups is a promising way to achieve the global optimization of eCO₂ RR via promoting adsorption and activation of CO₂.

Review—Recent Progress in Graphene Based Modified Electrodes for Electrochemical Detection of Dopamine

Graphene and its derivatives have been widely used for the electrochemical detection of dopamine (DA) neurotransmitter, thanks to its high surface area and excellent conductivity. Modified graphene and graphene-based nanocomposites have shown improved catalytic activity towards DA detection. Various modification approaches have been taken, including heteroatom doping and association with other nanomaterials. This review summarizes and highlights the recent advances in graphene-based electrodes for the electrochemical detection of DA. It also aims to provide an overview of the advantages of using polymer as a linker platform to form graphene-based nanocomposites applied to electrochemical DA sensors.

Roughness Effect of Cu on Electrocatalytic CO2 Reduction towards C2H4

Electrochemical reduction of CO 2 to produce valuable multi-carbon products is a promising avenue for promoting CO 2 conversion and achieving renewable energy storage, and it has also attracted considerable attention recently. However, the synthesis of Cu electrode with a controllable electrochemical active surface area (ECSA) to understand its role in CO 2 reduction to C 2 H 4 remains challenging. Herein, a series of Cu electrodes with different ECSA is synthesized through a simple oxidation-reduction approach. We reveal that the improved selectivity of C 2 H 4 is proportional to the ECSA of Cu in the low ECSA range, and a further increase in ECSA has a negligible effect on its selectivity. The enlarged surface area could strengthen the local pH effect near the surface of Cu electrode and suppress the generation of C 1 products as well as H 2 . The study provides a feasible strategy to rationally design electrocatalysts with high electrochemical CO 2 reduction performances.

Ultrasmall Cu Nanocrystals Dispersed in Nitrogen-Doped Carbon as Highly Efficient Catalysts for CO2 Electroreduction

The electroreduction of carbon dioxide (CO₂) to a liquid product is a viable method for establishing an artificial carbon cycle. Unfortunately, most electrocatalysts' low efficiency and instability prevent them from being used in practical applications. In the current study, we developed ultrasmall Cu nanocrystals embedded in nitrogen-doped carbon nanosheets (Cu/NC-NSs) for selective CO₂ electroreduction by adjusting the potential. Cu/NC-NSs had 43.7 and 63.5% Faradaic efficiencies for the synthesis of ethanol and formate with applied potentials of -0.37 and -0.77 V vs reversible hydrogen electrode (RHE) using a flow cell architecture, respectively. Moreover, these Cu/NC-NSs show a steady catalytic performance up to 16 h. Density functional theory (DFT) calculations were performed to investigate the reaction mechanism. Furthermore, the synergistic effect formed by nitrogen-doped carbon and highly dispersed copper atoms led to their excellent performance in CO₂ electroreduction.

Catalysis for e-Chemistry: Need and Gaps for a Future De-Fossilized Chemical Production, with Focus on the Role of Complex (Direct) Syntheses by Electrocatalysis

The prospects, needs and limits in current approaches in catalysis to accelerate the transition to e-chemistry, where this term indicates a fossil fuel-free chemical production, are discussed. It is suggested that e-chemistry is a necessary element of the transformation to meet the targets of net zero emissions by year 2050 and that this conversion from the current petrochemistry is feasible. However, the acceleration of the development of catalytic technologies based on the use of renewable energy sources (indicated as reactive catalysis) is necessary, evidencing that these are part of a system of changes and thus should be assessed from this perspective. However, it is perceived that the current studies in the area are not properly addressing the needs to develop the catalytic technologies required for e-chemistry, presenting a series of relevant aspects and directions in which research should be focused to develop the framework system transformation necessary to implement e-chemistry.

Guiding CO2RR Selectivity by Compositional Tuning in the Electrochemical Double Layer

The electrochemical conversion of carbon dioxide to value-added chemicals provides an environmentally benign alternative to current industrial practices. However, current electrocatalytic systems for the CO₂ reduction reaction (CO₂RR) are not practical for industrialization, owing to poor specific product selectivity and/or limited activity. Interfacial engineering presents a versatile and effective method to direct CO₂RR selectivity by fine-tuning the local chemical dynamics. This Account describes interfacial design strategies developed in our laboratory that use electrolyte engineering and porous carbon materials to modify the local composition at the electrode-electrolyte interface.Our first strategy for influencing surface reactivity is to perturb the electrochemical double layer by tuning the electrolyte composition. We approached this investigation by considering how charged molecular additives can organize at the electrode surface and impact CO₂ activation. Using a combination of advanced electrochemical techniques and in situ vibrational spectroscopy, we show that the surfactant properties (the identity of the headgroup, alkyl chain length, and concentration) as well as the electrolyte cation identity can affect how surfactant molecules assemble at a biased electrode. The interplay between the electrolyte cations and the surfactant additives can be regulated to favor specific carbon products, such as HCOO^-, and suppress the parasitic hydrogen evolution reaction (HER). Together, our findings highlight how molecular assemblies can be used to design selective electrocatalytic systems.In addition to the electrolyte design, the local spatial confinement of reaction intermediates presents another strategy to direct CO₂RR selectivity. We were interested in uncovering the role of porous carbon-supported catalysts toward selective carbon product formation. In our initial study, we show that carbon porosity can be optimized to enhance C₂H₄ and CO selectivity in a series of Cu catalysts embedded in a tunable carbon aerogel matrix. These results suggested that local confinement of the active surface plays a role in CO₂ activation and motivated an investigation into probing how this phenomenon can be translated to a planar Cu electrode. Our findings show that carbon modifiers facilitated surface reconstruction and regulated CO₂ diffusion to suppress HER and improve the C_2-3 product selectivity. Given the ubiquity of carbon materials in catalysis, this work demonstrates that carbon plays an active role in regulating selectivity by restricting the diffusion of substrate and reaction intermediates. Our work in tuning the composition of the electrochemical double layer for increased CO₂RR selectivity demonstrates the potential versatility in boosting catalytic performance across an array of catalytic systems.

Applications of Carbon Dots for the Photocatalytic and Electrocatalytic Reduction of CO2

The photocatalytic and electrocatalytic conversion of CO2 has the potential to provide valuable products, such as chemicals or fuels of interest, at low cost while maintaining a circular carbon cycle. In this context, carbon dots possess optical and electrochemical properties that make them suitable candidates to participate in the reaction, either as a single component or forming part of more elaborate catalytic systems. In this review, we describe several strategies where the carbon dots participate, both with amorphous and graphitic structures, in the photocatalysis or electrochemical catalysis of CO2 to provide different carbon-containing products of interest. The role of the carbon dots is analyzed as a function of their redox and light absorption characteristics and their complementarity with other known catalytic systems. Moreover, detailed information about synthetic procedures is also reviewed.

Carbon Nanomaterials (CNMs) and Enzymes: From Nanozymes to CNM-Enzyme Conjugates and Biodegradation

Carbon nanomaterials (CNMs) and enzymes differ significantly in terms of their physico-chemical properties—their handling and characterization require very different specialized skills. Therefore, their combination is not trivial. Numerous studies exist at the interface between these two components—especially in the area of sensing—but also involving biofuel cells, biocatalysis, and even biomedical applications including innovative therapeutic approaches and theranostics. Finally, enzymes that are capable of biodegrading CNMs have been identified, and they may play an important role in controlling the environmental fate of these structures after their use. CNMs’ widespread use has created more and more opportunities for their entry into the environment, and thus it becomes increasingly important to understand how to biodegrade them. In this concise review, we will cover the progress made in the last five years on this exciting topic, focusing on the applications, and concluding with future perspectives on research combining carbon nanomaterials and enzymes.

Heat-treated copper phthalocyanine on carbon toward electrochemical CO2 conversion into ethylene boosted by oxygen reduction

Heat-treated copper phthalocyanine on carbon demonstrates high C2H4 selectivity at a low potential due to the in situ generated OH−.

The Critical Importance of Adopting Whole-of-Life Strategies for Polymers and Plastics

Plastics have been revolutionary in numerous sectors, and many of the positive attributes of modern life can be attributed to their use. However, plastics are often treated only as disposable commodities, which has led to the ever-increasing accumulation of plastic and plastic by-products in the environment as waste, and an unacceptable growth of microplastic and nanoplastic pollution. The catchphrase “plastics are everywhere”, perhaps once seen as extolling the virtues of plastics, is now seen by most as a potential or actual threat. Scientists are confronting this environmental crisis, both by developing recycling methods to deal with the legacy of plastic waste, and by highlighting the need to develop and implement effective whole-of-life strategies in the future use of plastic materials. The importance and topicality of this subject are evidenced by the dramatic increase in the use of terms such as “whole of life”, “life-cycle assessment”, “circular economy” and “sustainable polymers” in the scientific and broader literature. Effective solutions, however, are still to be forthcoming. In this review, we assess the potential for implementing whole-of-life strategies for plastics to achieve our vision of a circular economy. In this context, we consider the ways in which given plastics might be recycled into the same plastic for potential use in the same application, with minimal material loss, the lowest energy cost, and the least potential for polluting the environment.

Process modeling, techno-economic assessment, and life cycle assessment of the electrochemical reduction of CO2: a review

The electrochemical reduction of CO2 has emerged as a promising alternative to traditional fossil-based technologies for the synthesis of chemicals. Its industrial implementation could lead to a reduction in the carbon footprint of chemicals and the mitigation of climate change impacts caused by hard-to-decarbonize industrial applications, among other benefits. However, the current low technology readiness levels of such emerging technologies make it hard to predict their performance at industrial scales. During the past few years, researchers have developed diverse techniques to model and assess the electrochemical reduction of CO2 toward its industrial implementation. The aim of this literature review is to provide a comprehensive overview of techno-economic and life cycle assessment methods and pave the way for future assessment approaches. First, we identify which modeling approaches have been conducted to extend analysis to the production scale. Next, we explore the metrics used to evaluate such systems, regarding technical, environmental, and economic aspects. Finally, we assess the challenges and research opportunities for the industrial implementation of CO2 reduction via electrolysis.