CO2-Promoted Reactions: An Emerging Concept for the Synthesis of Fine Chemicals and Pharmaceuticals

Carbon dioxide capture and functionalization by bis(N-heterocyclic carbene)-borylene complexes

Derivatives of free monocoordinated borylenes have attracted considerable interest due to their ability to exhibit transition-metal-like reactivity, in particular small molecules capture. However, such complexes are rare as the formation is either endergonic, or the resulting adduct is a transient intermediate that is prone to reaction. Here, we present the synthesis of two bis(N-heterocyclic carbene)-borylene complexes capable of capturing and functionalizing carbon dioxide. The capture and subsequent functionalization of CO2 by the bis(NHC)-disilylamidoborylene 1 is demonstrated by the formation of the bis(NHC)-isocyanatoborylene-carbon dioxide complex 3. Reversible capture of CO2 is observed using the bis(NHC)-mesitylborylene 2, and the persistent bis(NHC)-mesitylborylene-carbon dioxide adduct 4 can be stabilized by hydrogen bonding with boric acid. The reactions of 4 with ammonia-borane and aniline demonstrate that the captured CO2 can be further functionalized.

Zn-MOF as a Single Catalyst with Dual Lewis Acidic and Basic Reaction Sites for CO2 Fixation

Continuous increase in carbon dioxide (CO2) emissions are causing imbalances in the environment, which impact biodiversity and human health. The conversion of CO2 to cyclic carbonates by means of metal-organic frameworks (MOFs) as a heterogeneous catalyst is a prominent strategy for rectifying this imbalance. Herein, we have developed nitrogen-rich Zn (II) based metal-organic framework, [Zn(CPMT)(bipy)]n (CPMT = 1-(4-carboxyphenyl)-5-mercapto-1H-tetrazole; bipy = 4,4'-bipyridine), synthesized via a mixed ligand strategy. This Zn-MOF showed high chemical stability in both acidic and basic conditions, and in organic solvents for a long time. On account of the concurrent presence of acid-base active sites and strong chemical stability under abrasive conditions, this Zn-MOF was employed as an effective catalyst for the coupling of CO2 and epoxides, under atmospheric pressure, mild temperature, and neat conditions. This Zn-MOF shows remarkable activity by producing high yields of epichlorohydrin carbonate (98%) and styrene carbonate (82%) at atmospheric CO2 pressure, 70 °C temperature, and 24 h reaction time, with turnover numbers (TON) of 217 and 181, respectively. The Zn-MOF could be reused for up to seven cycles with structural and framework integrity. Overall, this work demonstrates the synthesis of a novel and highly efficient MOF for CO2 conversion.

Photoredox-Catalyzed α-C-H Monoalkylation of Symmetric Polyols in the Presence of CO2

Achieving the selective modification of symmetric poly-hydroxylated compounds presents a significant challenge due to the presence of identical active sites. Herein, we address this challenge through the design of a ternary catalytic system that includes a photoredox catalyst, a hydrogen atom transfer promotor and a carbonation catalyst. This catalytic system enables the reversible carbonation of acyclic polyols under CO2 atmosphere, which modulates the reactivity of its distinct C-H bonds toward hydrogen atom transfers. An exquisite selectivity for the monoalkylation is achieved in a variety of unprotected light polyols, yielding valuable building blocks in short reaction times. Mechanistic and computational studies demonstrate that the formation of an intramolecular hydrogen bond between the transient carbonate and the free alcohol is pivotal for the kinetic and thermodynamic activation of a specific alcohol.

Nickel-Catalyzed Reductive Allylation of Aldehydes with Allylic Alcohols in the Presence of CO2

CO2-assisted and Ni-catalyzed direct reductive allylation of aldehydes utilizing allylic alcohols as allylic precursor has been reported. Various homoallyl alcohols could be synthesized in excellent yield with enhanced regioselectivity and stereoselectivity for alkyl- and aryl-substituted aldehydes under mild conditions. For different substrates, proper collocation of the catalytic precursor and ligand is crucial. Preliminary mechanistic studies supported the reaction pathway through a sequential allyl hydrocarbonate formation/allylnickelation/coordination insertion process by the Ni(I)/Ni(III) catalytic cycle, which has been proven by cyclic voltammetry analysis.

Base-mediated carboxylation of C-nucleophiles with CO2

Carbon dioxide (CO2) is an available, abundant, and renewable C1 resource, which could be converted into value-added chemicals. Due to its inherent thermodynamic stability and kinetic inertness, it is difficult to realize its efficient utilization. Nevertheless, many elegant strategies for the utilization of CO2 have been developed using Lewis bases, frustrated Lewis pairs, hydroxyl-containing compounds, amino-group-containing compounds or transition metal catalysis. Among them, base-mediated carboxylation of C-nucleophiles is an environmentally friendly strategy for CO2 conversion, which is operationally simple, using low-toxicity bases and economical available promoters, without the use of complex ligands or cocatalysts. This review summarizes related work on the base-mediated carboxylation of C-nucleophiles with CO2, based on the effects of nucleophiles, promoters, additives, and solvents. The types of pronucleophile are categorized as follows: hydrocarbon with C(sp3)-H, C(sp2)-H or C(sp)-H bonds, organosilanes, organotin, organoboron, and N-tosylhydrazones. Typical mechanisms and applications of these carboxylation reactions are also depicted. Moreover, mechanistic comprehension of CO2 activation and conversion at a molecular level aims to further expand the repertoire of carboxylation transformations mediated by bases.

One-Pot Synthesis of Dihydropyrans via CO2 Reduction and Domino Knoevenagel/oxa-Diels-Alder Reactions

Catalytic CO₂ reduction with phenylsilane under solvent-free conditions was linked with the one-pot synthesis of 3,4-dihydropyrans from β-dicarbonyl compounds and styrenes. The synthesis includes three processes: (1) bis(silyl)acetal formation from CO₂ and phenylsilane and a domino reaction of (2) Knoevenagel condensation and (3) inverse-electron-demand oxa-Diels-Alder reaction. The first process was catalyzed by a pentanuclear Zn^II complex (0.07 mol %) to generate bis(silyl)acetals, which were hydrolyzed into formaldehyde to be used in the second step.

CO2-Promoted and Nickel-Catalyzed Direct Hydroallylation of Terminal Alkynes with Allylic Alcohols: Access to 1,4-Dienes

CO₂-promoted and Ni-catalyzed direct hydroallylation of terminal alkynes with allylic alcohols has been achieved. Various 1,4-dienes could be synthesized in good yield with excellent Markovnikov selectivity for alkyl- and aryl-substituted terminal alkynes under mild reaction conditions. A gram-scale reaction gives considerable yield. Preliminary mechanistic studies support the reaction pathway through sequential carboxylation/allylnickelation/lithium bicarbonate nickelation/transmetalation in the hydroallylation of alkynes with allylic alcohols in the presence of CO₂.

A Review on Green Hydrogen Valorization by Heterogeneous Catalytic Hydrogenation of Captured CO2 into Value-Added Products

The catalytic hydrogenation of captured CO2 by different industrial processes allows obtaining liquid biofuels and some chemical products that not only present the interest of being obtained from a very low-cost raw material (CO2) that indeed constitutes an environmental pollution problem but also constitute an energy vector, which can facilitate the storage and transport of very diverse renewable energies. Thus, the combined use of green H2 and captured CO2 to obtain chemical products and biofuels has become attractive for different processes such as power-to-liquids (P2L) and power-to-gas (P2G), which use any renewable power to convert carbon dioxide and water into value-added, synthetic renewable E-fuels and renewable platform molecules, also contributing in an important way to CO2 mitigation. In this regard, there has been an extraordinary increase in the study of supported metal catalysts capable of converting CO2 into synthetic natural gas, according to the Sabatier reaction, or in dimethyl ether, as in power-to-gas processes, as well as in liquid hydrocarbons by the Fischer-Tropsch process, and especially in producing methanol by P2L processes. As a result, the current review aims to provide an overall picture of the most recent research, focusing on the last five years, when research in this field has increased dramatically.

Synergistic Effect between CO2 Chemisorption Using Amino-Modified Carbon Nitride and Epoxide Activation by High-Energy Electrons for Plasmon-Assisted Synthesis of Cyclic Carbonates

Photocatalytic CO₂ cycloaddition is a promising approach for CO₂ value-added processes. However, the efficiency of plasmon-assisted CO₂ cycloaddition still needs to be improved and the reaction mechanism is unclear. Herein, g-C₃N₄/Ag (ACN-Ag) hybrids exhibited superior activity of CO₂ cycloaddition by coupling a semiconductor into the plasmonic system, in which the ACN grafting amino group by the formation of carbon vacancies can enhance CO₂ chemisorption; meanwhile, photo-generated electrons from ACN transfer to Ag to form high-energy electrons, which can activate propylene oxide, accelerating the ring-opening step. Importantly, photo-generated electron injection from ACN to Ag and the interaction between Ag nanoparticles and ACN were confirmed by single-particle photoluminescence spectroscopy. The wavelength-dependent activity demonstrated that the plasmon excitation is crucial for the reaction. Moreover, in situ single-particle PL quenching caused by propylene oxide and in situ electron paramagnetic resonance verified the activation of propylene oxide by ACN-Ag. This work is conducive to an in-depth understanding of the mechanism of CO₂ cycloaddition at the single-particle level and provides guidance for the organic synthesis.

Photocatalytic Cleavage of C(sp3 )-N Bond in Trialkylamines to Dialkylamines and Olefins

Development of a new and green strategy for C(sp³ )-N bond cleavage is very interesting. Herein, photocatalytic cleavage of the C(sp³ )-N bond of trialkylamines was achieved, with concurrent formation of dialkylamines and olefins. It was found that a rationally designed 2D-Bi₂ WO₆ @1D-LaPO₄ heterostructure was very efficient for the reaction due to its high light collection efficiency and unique catalytic properties. The strategy could be used for different trialkylamines, including triethylamine, tri-n-propylamine, and ethyl-di-isopropylamine. The mechanistic investigation indicated that the catalyst with heterostructure was not only favorable for charge carrier separation but also rendered excited electrons with high reduction capacity. This work opens a way for C(sp³ )-N bond cleavage of trialkylamines.

Direct and Selective Electrocarboxylation of Styrene Oxides with CO2 for Accessing β-Hydroxy Acids

Highly selective and direct electroreductive ring-opening carboxylation of epoxides with CO2 in an undivided cell is reported. This reaction shows broad substrate scopes within styrene oxides under mild conditions, providing practical and scalable access to important synthetic intermediate β-hydroxy acids. Mechanistic studies show that CO2 functions not only as a carboxylative reagent in this reaction but also as a promoter to enable efficient and chemoselective transformation of epoxides under additive-free electrochemical conditions. Cathodically generated α-radical and α-carbanion intermediates lead to the regioselective formation of α-carboxylation products.

Carbon dioxide enhances sulphur-selective conjugate addition reactions

Sulphur-selective conjugate addition reactions play a central role in synthetic chemistry and chemical biology. A general tool for conjugate addition reactions should provide high selectivity in the presence of competing nucleophilic functional groups, namely nitrogen nucleophiles. We report CO₂-mediated chemoselective S-Michael addition reactions where CO₂ can reversibly control the reaction pHs, thus providing practical reaction conditions. The increased chemoselectivity for sulphur-alkylation products was ascribed to CO₂ as a temporary and traceless protecting group for nitrogen nucleophiles, while CO₂ efficiently provide higher conversion and selectivity sulphur nucleophiles on peptides and human serum albumin (HSA) with various electrophiles. This method offers simple reaction conditions for cysteine modification reactions when high chemoselectivity is required.

CO2 -Promoted Direct Acylation of Amines and Phenols by the Activation of Inert Thioacid Salts

Herein a carbon dioxide-promoted synthetic approach for the direct amidation between unactivated thioacid salts and amines under mild conditions was developed for a wide range of substrates. The method afforded amides in good to excellent yields under transition-metal-free and activation-reagent-free conditions, in sharp contrast to early methodologies on amide synthesis based on transition-metal catalysis. The method offered a greener and transition metal-free protocol applicable to pharmaceuticals preparations. Phenolic compounds were also found to be suitable acylation substrates with potassium thiosulfide KHS as the only byproduct. Moreover, this approach was applied to amide synthesis of valuable bio-active molecules such as moclobemide, melatonin, and a fungicide. Insights into the reaction mechanism involving carbon dioxide were provided through NMR spectroscopy and computational calculations. A plausible mechanism was proposed that involves weak interactions between carbon dioxide and potassium thioacetate in a dynamic equilibrium state formation of a six-membered ring.

Homogeneous Catalytic CO2 Hydrogenation by [Fe]-Hydrogenase Bioinspired Complexes: A Computational Study

Computational modeling at the DLPNO-CCSD(T)/CBS//M06-L/def2-TZVP level of theory was used to propose four different iron catalysts whose structures were inspired on the [Fe]-hydrogenase active site: [Fe(^MeP^NNH^NP)(acmp)] (C(1), ^MeP^NNH^NP = 2,6-bis(dimethylphosphine), acmp = acylmethylpyridine), [Fe(C^NNH^NC)(acmp)] (C(2), C^NNH^NC = 2,6-bis(methylimidazol-2-ylidene)), [Fe(^MeP^NN^NP)(acmp)] (D(1), ^MeP^NN^NP = 2,6-bis((dimethylphosphine)pyridine)), and [Fe(C^NN^NC)(acmp)] (D(2), C^NN^NC = 2,6-bis((methylimidazol-2-ylidene) pyridine)). Through these electronic structure calculations, the catalytic mechanism of the reaction was explored. The intermediates and transition states present along the reaction coordinate were identified and described as to their equilibrium geometries, vibrational frequencies, and energies. Quasi-harmonic corrections were performed considering conditions analogous to those used experimentally. To compare the catalytic activities of the studied catalysts, turnover frequencies (TOFs) were calculated. Based on the explored catalytic cycles and TOF values (D(1) > C(1) > D(2) > C(2)), the most suitable iron catalysts are those with tridentate phosphine pincer-type ligands coordinated to the metal center. These systems are new promising iron catalysts to promote the CO₂ hydrogenation to formic acid without any use of bases or additives.

Acceleration Effect of Bases on Mn Pincer Complex-Catalyzed CO2 Hydroboration

Herein, we report a comprehensive study of CO₂ hydroboration catalyzed by Mn pincer complexes. The traditional metal-ligand cooperation (MLC) mechanism based on the H-Mn-N-Bpin pincer complex is not viable due to the competing abstraction of the Bpin group from the H-Mn-N-Bpin complex by NaO^tBu. Instead, we propose an ionic mechanism based on the H-Mn-N-Na species with a low energy span (22.5 kcal/mol) and unveil the acceleration effect of bases. The X groups in the H-Mn-N-X catalyst models are further modulated, and the steric hindrance and H→B donor-acceptor interactions of the X group increase the energy barrier of the hydride transfer. The hydrogen bond and electrostatic interactions of the X group can accelerate the hydride transfer to HCOOBpin and HCHO molecules except for the nonpolar CO₂ molecule. Based on these discoveries, we designed a pyridine-based Mn pincer catalyst system, which could achieve CO₂ hydroboration in low-temperature and base-free conditions through a metal-ligand cooperation mechanism.

Hydroboration of carbon dioxide with pinacolborane catalyzed by various aluminum hydrides: A comparative mechanistic study

In this work, density functional theory (DFT) calculations was performed to probe the catalytic viability of various neutral, cationic and anionic aluminum hydrides (AlH) in the hydroboration of CO2 with...

Challenges and recent advancements in the transformation of CO2 into carboxylic acids: straightforward assembly with homogeneous 3d metals

Transformation of carbon dioxide (CO2) into valuable organic carboxylic acids is essential for maintaining sustainability. In this review, such CO2 thermo-, photo- and electrochemical transformations under 3d-transition metal catalysis are described from 2017 until 2022.

Zn(II)-Functionalized COF as a Recyclable Catalyst for the Sustainable Synthesis of Cyclic Carbonates and Cyclic Carbamates from Atmospheric CO2

A simple covalent organic framework (COF) bearing β-ketoenamine units as a potential heterogeneous ligand for ZnII-catalyzed fixation and transformation of CO2 into value-added chemicals is reported. Catalytic investigations convincingly demonstrated...

Photocatalytic synthesis of tetra-substituted furans promoted by carbon dioxide

A CO2-promoted transition metal-free photocatalytic synthesis of tetra-substituted furan derivatives from 1,3-diketones as the only starting material.

Basicity as a Thermodynamic Descriptor of Carbanions Reactivity with Carbon Dioxide: Application to the Carboxylation of α,β-Unsaturated Ketones

The utilization of carbon dioxide as a raw material represents nowadays an appealing strategy in the renewable energy, organic synthesis, and green chemistry fields. Besides reduction strategies, carbon dioxide can be exploited as a single-carbon-atom building block through its fixation into organic scaffolds with the formation of new C-C bonds (carboxylation processes). In this case, activation of the organic substrate is commonly required, upon formation of a carbanion C^-, being sufficiently reactive toward the addition of CO₂. However, the prediction of the reactivity of C^- with CO₂ is often problematic with the process being possibly associated with unfavorable thermodynamics. In this contribution, we present a thermodynamic analysis combined with density functional theory calculations on 50 organic molecules enabling the achievement of a linear correlation of the standard free energy (ΔG⁰) of the carboxylation reaction with the basicity of the carbanion C^-, expressed as the pK_a of the CH/C^- couple. The analysis identifies a threshold pK_a of ca 36 (in CH₃CN) for the CH/C^- couple, above which the ΔG⁰ of the carboxylation reaction is negative and indicative of a favorable process. We then apply the model to a real case involving electrochemical carboxylation of flavone and chalcone as model compounds of α,β-unsaturated ketones. Carboxylation occurs in the β-position from the doubly reduced dianion intermediates of flavone and chalcone (calculated ΔG⁰ of carboxylation in β = -12.8 and -20.0 Kcalmol^-1 for flavone and chalcone, respectively, associated with pK_a values for the conjugate acids of 50.6 and 51.8, respectively). Conversely, the one-electron reduced radical anions are not reactive toward carboxylation (ΔG⁰ > +20 Kcalmol^-1 for both substrates, in either α or β position, consistent with pK_a of the conjugate acids < 18.5). For all the possible intermediates, the plot of calculated ΔG⁰ of carboxylation vs. pK_a is consistent with the linear correlation model developed. The application of the ΔG⁰ vs. pK_a correlation is finally discussed for alternative reaction mechanisms and for carboxylation of other C=C and C=O double bonds. These results offer a new mechanistic tool for the interpretation of the reactivity of CO₂ with organic intermediates.

A CO2-Catalyzed Transamidation Reaction

Transamidation reactions are often mediated by reactive substrates in the presence of overstoichiometric activating reagents and/or transition metal catalysts. Here we report the use of CO₂ as a traceless catalyst: in the presence of catalytic amounts of CO₂, transamidation reactions were accelerated with primary, secondary, and tertiary amide donors. Various amine nucleophiles including amino acid derivatives were tolerated, showcasing the utility of transamidation in peptide modification and polymer degradation (e.g., Nylon-6,6). In particular, N,O-dimethylhydroxyl amides (Weinreb amides) displayed a distinct reactivity in the CO₂-catalyzed transamidation versus a N₂ atmosphere. Comparative Hammett studies and kinetic analysis were conducted to elucidate the catalytic activation mechanism of molecular CO₂, which was supported by DFT calculations. We attributed the positive effect of CO₂ in the transamidation reaction to the stabilization of tetrahedral intermediates by covalent binding to the electrophilic CO₂.

Ascendancy of Nitrogen Heterocycles in the Computationally Designed Mn(I)PNN Pincer Catalysts on the Hydrogenation of Carbon Dioxide to Methanol

The development of sustainable catalysts to get methanol from CO₂ under milder conditions and without any additives is still considered an arduous task. In many instances, transition-metal-catalyzed carbon dioxide to formic acid formation is more facile than methanol formation. This article provides comprehensive density functional theoretic investigations of six new Mn(I)PNN complexes, which are designed to perform CO₂ to methanol conversion under milder reaction conditions. All these six catalysts have similar structural features except at terminal nitrogen, -N (1), where adenine-inspired nitrogen heterocycles containing pyridine and pyrimidine moieties are attached to instill an electron withdrawing effect on the central metal and thus to facilitate dihydrogen polarization during the catalyst regeneration. All these computationally modeled Mn(I)PNN complexes demonstrate the promising catalytic activity to get methanol through cascade catalytic cycles at 298.15 K. The metal-ligand cooperative (MLC) as well as noncooperative (NC) pathways are investigated for each catalytic cycle. The NC pathway is the preferred pathway for formic acid and formaldehyde formation, whereas methanol formation proceeds through only the MLC pathway. Different nitrogen heterocycles attached to the -N (1) terminal manifested a considerable amount of impact on the Gibbs free energies, overall activation energies, and computed turnover frequencies (TOFs). Among all the catalysts, SPCAT02 provides excellent TOFs for HCO₂H (500 151 h^-1), HCHO (11 912 h^-1), and CH₃OH (2 372 400 h^-1) formation at 50 °C. SPCAT04 is found to be a better catalyst for the selective formation of formic acid formation at room temperature than the rest of the catalysts. The computed TOF results are found reliable upon comparison with experimentally established catalysts. To establish the structure-activity relationship, the activation strain model and Fukui function calculations are performed on all the catalysts. Both these studies provide complementary results. The present study revealed a very important finding that a more electrophilic metal center could facilitate the CO₂ hydrogenation reaction robustly. All computationally designed catalysts could be cheaper and better alternatives to convert CO₂ to methanol under mild reaction conditions in an aqueous medium.