Acid-Stable and Active M–N–C Catalysts for the Oxygen Reduction Reaction: The Role of Local Structure

Engineering of single atomic Fe-N4 sites on hollow carbon cages to achieve highly reversible MoS2 anodes for Li-ion batteries

Although the single atom electrocatalysts have been demonstrated as efficient catalysts for promoting Li2S/Na2S formation and decomposition in Li-S/Na-S batteries, the functional morphological and structural engineering capable of exposing more active sites is regarded as an essential factor to further enhance the catalytic activity. Here, we have synthesized a single atomically dispersed Fe sites embedded within hollow nitrogen doped carbon cages (Fe-N-HCN) using Fe3O4 spheres as an oxidant and sacrificial template, which is used as a high-efficiency catalyst for boosting the reversible capacity of MoS2 anode in lithium-ion batteries (LIBs). As expected, the electrochemical reaction of MoS2/Fe-N-HCN anode exhibits higher reversibility than pure MoS2 electrodes. Moreover, density functional theory is also employed to reveal that Fe-N-HCN can be effectively adsorbed and catalyze the rapid decomposition of Li2S. The hollow carbon cage structure can facilitate the exposure of the active Fe-N4 sites and favor the mass transfer during the electrochemical reactions, thus the synergistic effect of the Fe-N4 site and the hollow carbon cage structure together improve the catalytic activity for the conversion reaction of MoS2 anode.

Main Group SnN4O Single Sites with Optimized Charge Distribution for Boosting the Oxygen Reduction Reaction

Transition metal single-atom catalysts (SACs) have been regarded as possible alternatives to platinum-based materials due to their satisfactory performance of the oxygen reduction reaction (ORR). By contrast, main-group metal elements are rarely studied due to their unfavorable surface and electronic states. Herein, a main-group Sn-based SAC with penta-coordinated and asymmetric first-shell ligands is reported as an efficient and robust ORR catalyst. The introduction of the vertical oxygen atom breaks the symmetric charge balance, modulating the binding strength to oxygen intermediates and decreasing the energy barrier for the ORR process. As expected, the prepared Sn SAC exhibits outstanding ORR activity with a high half-wave potential of 0.912 V (vs RHE) and an excellent mass activity of 13.1 A mgSn-1 at 0.850 V (vs RHE), which surpasses that of commercial Pt/C and most reported transition-metal-based SACs. Additionally, the reported Sn SAC shows excellent ORR stability due to the strong interaction between Sn sites and the carbon support with oxygen atom as the bridge. The excellent ORR performance of Sn SAC was also proven by both liquid- and solid-state zinc-air battery (ZAB) measurements, indicating its great potential in practical applications.

Tuning Two-Dimensional Phthalocyanine Dual Site Metal-Organic Framework Catalysts for the Oxygen Reduction Reaction

Metal-organic frameworks (MOFs) offer an interesting opportunity for catalysis, particularly for metal-nitrogen-carbon (M-N-C) motifs by providing an organized porous structural pattern and well-defined active sites for the oxygen reduction reaction (ORR), a key need for hydrogen fuel cells and related sustainable energy technologies. In this work, we leverage electrochemical testing with computational models to study the electronic and structural properties in the MOF systems and their relationship to ORR activity and stability based on dual transitional metal centers. The MOFs consist of two M1 metals with amine nodes coordinated to a single M2 metal with a phthalocyanine linker, where M1/M2 = Co, Ni, or Cu. Co-based metal centers, in particular Ni-Co, demonstrate the highest overall activity of all nine tested MOFs. Computationally, we identify the dominance of Co sites, relative higher importance of the M2 site, and the role of layer M1 interactions on the ORR activity. Selectivity measurements indicate that M1 sites of MOFs, particularly Co, exhibit the lowest (<4%), and Ni demonstrates the highest (>46%) two-electron selectivity, in good agreement with computational studies. Direct in situ stability characterization, measuring dissolved metal ions, and calculations, using an alkaline stability metric, confirm that Co is the most stable metal in the MOF, while Cu exhibits notable instability at the M1. Overall, this study reveals how atomistic coupling of electronic and structural properties affects the ORR performance of dual site MOF catalysts and opens new avenues for the tunable design and future development of these systems for practical electrochemical applications.

Engineering Co-N-Cr Cross-Interfacial Electron Bridges to Break Activity-Stability Trade-Off for Superdurable Bifunctional Single Atom Oxygen Electrocatalysts

Atomically dispersed metal-nitrogen-carbon (M-N-C) catalysts have exhibited encouraging oxygen reduction reaction (ORR) activity. Nevertheless, the insufficient long-term stability remains a widespread concern owing to the inevitable 2-electron byproducts, H2O2. Here, we construct Co-N-Cr cross-interfacial electron bridges (CIEBs) via the interfacial electronic coupling between Cr2O3 and Co-N-C, breaking the activity-stability trade-off. The partially occupied Cr 3d-orbitals of Co-N-Cr CIEBs induce the electron rearrangement of CoN4 sites, lowering the Co-OOH* antibonding orbital occupancy and accelerating the adsorption of intermediates. Consequently, the Co-N-Cr CIEBs suppress the two-electron ORR process and approach the apex of Sabatier volcano plot for four-electron pathway simultaneously. As a proof-of-concept, the Co-N-Cr CIEBs is synthesized by the molten salt template method, exhibiting dominant 4-electron selectively and extremely low H2O2 yield confirmed by Damjanovic kinetic analysis. The Co-N-Cr CIEBs demonstrates impressive bifunctional oxygen catalytic activity (▵E=0.70 V) and breakthrough durability including 100 % current retention after 10 h continuous operation and cycling performance over 1500 h for Zn-air battery. The hybrid interfacial configuration and the understanding of the electronic coupling mechanism reported here could shed new light on the design of superdurable M-N-C catalysts.

Surface engineering for stable electrocatalysis

In recent decades, significant progress has been achieved in rational developments of electrocatalysts through constructing novel atomistic structures and modulating catalytic surface topography, realizing substantial enhancement in electrocatalytic activities. Numerous advanced catalysts were developed for electrochemical energy conversion, exhibiting low overpotential, high intrinsic activity, and selectivity. Yet, maintaining the high catalytic performance under working conditions with high polarization and vigorous microkinetics that induce intensive degradation of surface nanostructures presents a significant challenge for commercial applications. Recently, advanced operando and computational techniques have provided comprehensive mechanistic insights into the degradation of surficial functional structures. Additionally, various innovative strategies have been devised and proven effective in sustaining electrocatalytic activity under harsh operating conditions. This review aims to discuss the most recent understanding of the degradation microkinetics of catalysts across an entire range of anodic to cathodic polarizations, encompassing processes such as oxygen evolution and reduction, hydrogen reduction, and carbon dioxide reduction. Subsequently, innovative strategies adopted to stabilize the materials' structure and activity are highlighted with an in-depth discussion of the underlying rationale. Finally, we present conclusions and perspectives regarding future research and development. By identifying the research gaps, this review aims to inspire further exploration of surface degradation mechanisms and rational design of durable electrocatalysts, ultimately contributing to the large-scale utilization of electroconversion technologies.

Tuning Active Site Flexibility by Defect Engineering of Graphene Ribbon Edge-hosted Fe-N3 Sites

Nitrogen-doped, carbon-supported transition metal catalysts are excellent for several reactions. Structural engineering of M-Nx sites to boost catalytic activity is rarely studied. Here, we demonstrate that the structural flexibility of Fe-N3 site is vital for tuning the electronic structure of Fe atoms and regulating the catalytic transfer hydrogenation (CTH) activity. By introducing carbon defects, we construct Fe-N3 sites with varying Fe-N bond lengths distinguishable by X-ray absorption spectroscopy. We investigate the CTH activity by density-functional theory and microkinetic calculations and reveal that the vertical displacement of the Fe atom out of the plane of the support, induced by the Fe-N3 distortion, raises the Fe3 d z 2 ${3{d}_{{z}^{2}}{\rm \ }}$ orbital and strengthens binding. We propose that the activity is controlled by the relaxation of the reconstructed site, which is further affected by Fe-N bond length, an excellent activity descriptor. We elucidate the origin of the CTH activity and principles for high-performing Fe-N-C catalysts by defect engineering.

Activity And Stability of Single- And Di-Atom Catalysts for the O2 Reduction Reaction

Efficient and inexpensive catalysts for the O2 reduction reaction (ORR) are needed for the advancement of renewable energy technologies. In this study, we designed a computational catalyst-screening method to identify single and di-atom metal dopants from first-row transition elements supported on defect-containing nitrogenated graphene surfaces for the ORR. Based on formation-energy calculations and micro-kinetic modelling of reaction pathways using intermediate binding free energies, we have identified four potentially interesting single-atom catalysts (SACs) and fifteen di-atom catalysts (DACs) with relatively high estimated catalytic activity at 0.8 V vs RHE. Among the best SACs, MnNC shows high stability in both acidic and alkaline media according to our model. For the DACs, we found four possible candidates, MnMn, FeFe, CoCo, and MnNi doped on quad-atom vacancy sites having considerable stability over a wide pH range. The remaining SACs and DACs with high activity are either less stable or show a stability region at an alkaline pH.

Design of Efficient Oxygen Reduction Reaction Catalysts with Single Transition Metal Atom on N-Doped Graphdiyne

The revelation of the underlying structure-property relationship of single-atom catalysts (SACs) is a fundamental issue in the oxygen reduction reaction (ORR). Here we present systematic theoretical and experimental investigations of various N-doped graphdiyne (NGDY) supported transition metals (TMs) to shed light on this relationship. Calculation results indicate that the TMs' comprehensive activities follow the order of Pd@NGDY > Ni@NGDY > Co@NGDY > Fe@NGDY, which fits well with our experimental conclusion. Moreover, detailed structure-property relationship (194 in total) analysis suggests that the key-species binding stability (ΔG*OH), the d-orbital center (εd/εd-a) and charge transfer (ΔQTM/ΔQTM-a) of the active metal before/after reactants adsorption and the bond length of TM-O (LTM-O) as descriptors can well reflect the intermediate binding stability or ORR activity on different TM-SACs. Specifically, the change trend of catalytic activity is opposite to that of intermediate binding stability, meaning that too strongly bonded *OOH, *O, and *OH intermediates are unfavorable for ORR.

Novel 2D carbon material T-graphene supported 3d transition metal single atoms as efficient oxygen reduction catalysts

Carbon-based support anchored 3d transition metal (TM) single atom catalysts (SACs) have been widely considered as promising candidates for the oxygen reduction reaction (ORR), and their intrinsic activity is closely related to the geometric and electronic structures of the supports. T-graphene was predicted to have high conductivity and stability, so it may be also a promising support for loading SACs for electrocatalysis. Here, we systematically evaluate the ORR activity of T-graphene supported TM single atoms (TMN4-Tgra and TMC4-Tgra, TM = Sc-Zn) and their graphene supported counterparts (TMN4-Gra and TMC4-Gra). The TM(dxz)-O(px), TM(dyz)-O(py) and TM(dz2)-O(pz + s) orbital hybridizations between the active central metal and the *OH intermediate determine the ORR activity. Compared to graphene, T-graphene increases the d-band center (especially the β-spin state) of single atoms and reduces the *OH adsorption strength, which thus improves the ORR activity of the catalysts located in the left leg of the ORR activity volcano plot. Interestingly, we found that for the catalysts with different TMs anchored on the same support, the adsorption strength of oxygen intermediates increases with the increase of the d-band center of the active site, while for the catalysts with the same metal anchored on different supports, the adsorption strength of oxygen intermediates weakens with the increase of the d-band center of the active site, which can serve as a d-band center dependence law on supports and active sites for designing ORR catalysts.

-SR removal or -R removal? A mechanistic revisit on the puzzle of ligand etching of Au25(SR)18 nanoclusters during electrocatalysis

Accurate identification of active sites is highly desirable for elucidation of the reaction mechanism and development of efficient catalysts. Despite the promising catalytic performance of thiolated metal nanoclusters (NCs), their actual catalytic sites remain elusive. Traditional first-principles calculations and experimental observations suggested dealkylated S and dethiolated metal, respectively, to be the active centers. However, the real kinetic origin of thiolate etching during the electrocatalysis of NCs is still puzzling. Herein, we conducted advanced first-principles calculations and electrochemical/spectroscopic experiments to unravel the electrochemical etching kinetics of thiolate ligands in prototype Au25(SCH3)18 NC. The electrochemical processes are revealed to be spontaneously facilitated by dethiolation (i.e., desorption of -SCH3), forming the free HSCH3 molecule after explicitly including the solvent effect and electrode potential. Thus, exposed under-coordinated Au atoms, rather than the S atoms, serve as the real catalytic sites. The thermodynamically preferred Au-S bond cleavage arises from the selective attack of H from proton/H2O on the S atom under suitable electrochemical bias due to the spatial accessibility and the presence of S lone pair electrons. Decrease of reduction potential promotes the proton attack on S and significantly accelerates the kinetics of Au-S bond breakage irrespective of the pH of the medium. Our theoretical results are further verified by the experimental electrochemical and spectroscopic data. At more negative electrode potentials, the number of -SR ligands decreased with concomitant increase of the vibrational intensity of S-H bonds. These findings together clarify the atomic-level activation mechanism on the surface of Au25(SR)18 NCs.

Engineering Single-Atom Electrocatalysts for Enhancing Kinetics of Acidic Volmer Reaction

The design of active and low-cost electrocatalyst for hydrogen evolution reaction (HER) is the key to achieving a clean hydrogen energy infrastructure. The most successful design principle of hydrogen electrocatalyst is the activity volcano plot, which is based on Sabatier principle and has been used to understand the exceptional activity of noble metal and design of metal alloy catalysts. However, this application of volcano plot in designing single-atom electrocatalysts (SAEs) on nitrogen doped graphene (TM/N₄C catalysts) for HER has been less successful due to the nonmetallic nature of the single metal atom site. Herein, by performing ab initio molecular dynamics simulations and free energy calculations on a series of SAEs systems (TM/N₄C with TM = 3d, 4d, or 5d metals), we find that the strong charge-dipole interaction between the negatively charged *H intermediate and the interfacial H₂O molecules could alter the transition path of the acidic Volmer reaction and dramatically raise its kinetic barrier, despite its favorable adsorption free energy. Such kinetic hindrance is also experimentally confirmed by electrochemical measurements. By combining the hydrogen adsorption free energy and the physics of competing interfacial interactions, we propose a unifying design principle for engineering the SAEs used for hydrogen energy conversion, which incorporates both thermodynamic and kinetic considerations and allows going beyond the activity volcano model.

Exploring the catalytic activity of graphene-based TM-NxC4-x single atom catalysts for the oxygen reduction reaction via density functional theory calculation

Electrocatalysts for the oxygen reduction reaction (ORR) are extremely crucial for advanced energy conversion technologies, such as fuel cell batteries. A promising ORR catalyst usually should have low overpotentials, rich catalytic sites and low cost. In the past decade, single-atom catalyst (SAC) TM-N₄ (TM = Fe, Co, etc.) embedded graphene matrixes have been widely studied for their promising performance and low cost for ORR catalysis, but the effect of coordination on the ORR activity is not fully understood. In this work, we will employ density functional theory (DFT) calculations to systematically investigate the ORR activity of 40 different 3d transition metal single-atom catalysts (SACs) supported on nitrogen-doped graphene supports, ranging from vanadium to zinc. Five different nitrogen coordination configurations (TM-N_xC_4-x with x = 0, 1, 2, 3, and 4) were studied to reveal how C/N substitution affects the ORR activity. By looking at the stability, free energy diagram, overpotential, and scaling relationship, our calculation showed that partial C substitution can effectively improve the ORR performance of Mn, Co, Ni, and Zn-based SACs. The volcano plot obtained from the scaling relationship indicated that the substitution of N by C could distinctively affect the potential-limiting step in the ORR, which leads to the enhanced or weakened ORR performance. Density of states and d-band center analysis suggested that this coordination-tuned ORR activity can be explained by the shift of the d-band center due to the coordination effect. Finally, four candidates with optimal ORR activity and dynamic stability were proposed from the pool: NiC₄, CoNC₃, CrN₄, and ZnN₃C. Our work provides a feasible designing strategy to improve the ORR activity of graphene-based TM-N₄ SACs by tuning the coordination environment, which may have potential implication in the high-performance fuel cell development.

Potential-Dependent Active Moiety of Fe-N-C Catalysts for the Oxygen Reduction Reaction

The real active moiety of Fe-N-C single-atom catalysts (SACs) during the oxygen reduction reaction (ORR) depends on the applied potential. Here, we examine the ORR activity of various SAC active moieties (Fe-N₄, Fe-(OH)N₄, Fe-(O₂)N₄, and Fe-(OH₂)N₄) over a wide potential window ranging from -0.8 to 1.0 V (vs. SHE) using constant potential density functional theory calculations. We show that the ORR activity of the Fe-N₄ moiety is hindered by the slow *OH protonation, while the Fe-(OH₂)N₄ (0.4 V ≤ U ≤ 1.0 V), *O₂-assisted Fe-N₄ (-0.6 V ≤ U ≤ 0.2 V), and Fe-(OH)N₄ (U = -0.8 V) moieties dominate the ORR activity of the Fe-N-C catalysts at different potential windows. These oxygenated species modified the single-atom Fe sites and can promote *OH protonation by regulating the electron occupancy of the Fe 3d_z² (spin-up) and Fe 3d_xz (spin-down) orbitals. Overall, our findings provide guidance for understanding the active moieties of SACs.

Recent Advances of Electrocatalyst and Cell Design for Hydrogen Peroxide Production

Electrochemical synthesis of H2O2 via a selective two-electron oxygen reduction reaction has emerged as an attractive alternative to the current energy-consuming anthraquinone process. Herein, the progress on electrocatalysts for H2O2 generation, including noble metal, transition metal-based, and carbon-based materials, is summarized. At first, the design strategies employed to obtain electrocatalysts with high electroactivity and high selectivity are highlighted. Then, the critical roles of the geometry of the electrodes and the type of reactor in striking a balance to boost the H2O2 selectivity and reaction rate are systematically discussed. After that, a potential strategy to combine the complementary properties of the catalysts and the reactor for optimal selectivity and overall yield is illustrated. Finally, the remaining challenges and promising opportunities for high-efficient H2O2 electrochemical production are highlighted for future studies.

What is the Real Origin of the Activity of Fe-N-C Electrocatalysts in the O2 Reduction Reaction? Critical Roles of Coordinating Pyrrolic N and Axially Adsorbing Species

Fe-N-C electrocatalysts have emerged as promising substitutes for Pt-based catalysts for the oxygen reduction reaction (ORR). However, their real catalytic active site is still under debate. The underlying roles of different types of coordinating N including pyridinic and pyrrolic N in catalytic performance require thorough clarification. In addition, how to understand the pH-dependent activity of Fe-N-C catalysts is another urgent issue. Herein, we comprehensively studied 13 different N-coordinated FeN_xC configurations and their corresponding ORR activity through simulations which mimic the realistic electrocatalytic environment on the basis of constant-potential implicit solvent models. We demonstrate that coordinating pyrrolic N contributes to a higher activity than pyridinic N, and pyrrolic FeN₄C exhibits the highest activity in acidic media. Meanwhile, the in situ active site transformation to *O-FeN₄C and *OH-FeN₄C clarifies the origin of the higher activity of Fe-N-C in alkaline media. These findings can provide indispensable guidelines for rational design of better durable Fe-N-C catalysts.

Metal-Doped PdH(111) Catalysts for CO2 Reduction

PdH-based catalysts hold promise for both CO₂ reduction to CO and the hydrogen evolution reaction. Density functional theory is used to systematically screen for stability, activity, and selectivity of transition metal dopants in PdH. The transition metal elements Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Y, Zr, Nb, Mo, Ru, Rh, Ag, Cd, Hf, Ta, W, and Re are doped into PdH(111) surface with six different doping configurations: single, dimer, triangle, parallelogram, island, and overlayer. We find that several dopants, such as Ti and Nb, have excellent predicted catalytic activity and CO₂ selectivity compared to the pure PdH hydride. In addition, they display good stability due to their negative doping formation energy. The improved performance can be assigned to reaction intermediates forming two bonds consisting of one C-Metal and one O-Metal bond on the PdH surface, which break the scaling relations of intermediates, and thus have stronger HOCO* binding facilitating CO₂ activation.