Fe-Based Metal–Organic Frameworks for Highly Selective Photocatalytic Benzene Hydroxylation to Phenol

Photocatalytic Oxidation of Benzene to Phenol with O2 over WO3 Treated by Vacuum-Sealed Annealing

Photocatalytic oxidation of benzene to phenol using molecular O2 is one of the most promising sustainable approaches for the green synthesis of phenol. Introducing oxygen vacancies (OVs) on semiconductor surfaces by defect engineering is a promising strategy to enhance the efficiency of benzene oxidation to produce phenol due to the unique functions of OVs in facilitating the charge separation and activation of molecular O2. Herein, a vacuum-sealed annealing strategy has been well developed to generate abundant surface OVs on semiconductors, such as WO3. The well-sealed quartz vial creates a well-controlled low-pressure condition for the formation of OVs without the need for external energy for maintaining the vacuum state. Moreover, the gaseous species generated during the thermal annealing process help mitigate stress-induced defects, particularly bulk defects. The vacuum-sealed annealed WO3 with sufficient OVs and reduced bulk defects shows a better photocatalytic performance in the one-step oxidation of benzene to phenol with O2, compared to the WO3 synthesized through thermal annealing in Ar and H2 atmospheres. The present vacuum-sealed annealing strategy is found to be further applicable to engineer a wide range of semiconducting photocatalysts with abundant OVs to optimize their properties for efficient photocatalysis and other OV-promoted systems.

Photocatalytic Semi-Hydrogenation of Acetylene to Polymer-Grade Ethylene with Molecular and Metal-Organic Framework Cobaloximes

The semi-hydrogenation of acetylene in ethylene-rich gas streams is a high-priority industrial chemical reaction for producing polymer-grade ethylene. Traditional thermocatalytic routes for acetylene reduction to ethylene, despite progress, still require high temperatures and high H2 consumption, possess relatively low selectivity, and use a noble metal catalyst. Light-powered strategies are starting to emerge, given that they have the potential to use directly the abundant and sustainable solar irradiation, but are ineffective. Here an efficient, >99.9% selective, visible-light powered, catalytic conversion of acetylene to ethylene is reported. The catalyst is a homogeneous molecular cobaloxime that operates in tandem with a photosensitizer at room temperature and bypasses the use of non-environmentally friendly and flammable H2 gas feed. The reaction proceeds through a cobalt-hydride intermediate with ≈100% conversion of acetylene under competitive (ethylene co-feed) conditions after only 50 min, and with no evolution of H2 or over-hydrogenation to ethane. The cobaloxime is further incorporated as a linker in a metal-organic framework; the result is a heterogeneous catalyst for the conversion of acetylene under competitive (ethylene co-feed) conditions that can be recycled up to six times and remains catalytically active for 48 h, before significant loss of performance is observed.

Confined Cu Single Sites in ZSM-5 for Photocatalytic Hydroxylation of Benzene to Phenol

Zeolites with band-like charge transport properties have exhibited their potential activities in sensing, optics, and electronics. Herein, a precisely designed Cu@ZSM-5 catalyst is presented with an ultra-wide bandgap of 4.27 eV, showing excellent photocatalytic activity in hydroxylation of benzene with benzene conversion 27.9% and phenol selectivity 97.6%. The SXRD and Rietveld refinement results illustrate that Cu@ZSM-5 has an average of 0.8 Cu atoms per unit cell and the single Cu atoms located in the cross-section of the sinusoidal and straight channels. XANES and EXAFS further demonstrate that the Cu atoms have an oxidation state of +2, coordinated with three OMFI-framework atoms and one ─OH group. Detailed characterizations demonstrate that the Cu@ZSM-5 with tailored bandgap is able to enhance the photoinduced electron-hole separation and hence promote selective hydroxylation of benzene to phenol via the superoxide radical route. This work may open a new way for designing electrically conductive zeolite-supported photocatalysts.

Synthesis of Fe3O4 Derived from Acid Mine Drainage (AMD) Sludge and Catalytic Degradation of Tetracycline

Acid mine drainage (AMD) sludge is waste generated in the process of acid mine wastewater treatment, and the use of AMD sludge to prepare Fe3O4 to activate H2O2 degradation pollutants is an effective means of resource utilization. In this study, the heterogeneous catalyst Fe3O4-based composites were synthesized by a one-step method using AMD sludge as a raw material, and the Fe3O4-based materials before and after catalysis were characterized by powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The effects of several key factors (pH values, H2O2 content, TC concentration, and Fe3O4 content) of tetracycline (TC) degradation were evaluated. The results revealed that the TC removal rate reached up to 95% within 120 min under optimal conditions (pH 3; H2O2, 5 mmol/L; TC concentration, 25 mg/L; Fe3O4 content, 1g/L). Moreover, •OH and •O2- radicals were generated during the Fenton-like degradation process, and the plausible degradation mechanism was discussed. Besides, the Fe3O4 catalyst exhibited fantastic stability after five cycles. In conclusion, this study is expected to promote the resource utilization of industrial sludge and provide a new material for the treatment of antibiotic-contaminated wastewater.

Vanadium as a Ti-like mediator boosting electronic transmission in Fe-based MOFs for photocatalytic sterilization

Efficient metal-organic frameworks (MOFs) photocatalytic bactericidal catalysts are urgently needed in water purification. Herein, a Fe-MOF (MIL-88B-NH2(V1Fe5) with promoted electron transport was achieved by vanadium (V) ions doping and V/Fe ratio optimization, showing excellent photocatalytic bactericidal activity againstE. coliunder visible light irradiation (99.92%). The efficient antibacterial mechanism, V as a Ti-like mediator boosting electronic transmission in MIL-88B-NH2(V1Fe5), was revealed by its band structure, transient photocurrent, electrochemical impedance spectroscopy, and scavenger quenching experiments. The enhancement of photocatalytic bactericidal performance of Fe-MOFs by V-ion-doping was confirmed by two other Fe-MOFs, MIL-53-NH2(V1Fe5) and MIL-101-NH2(V1Fe5), with the same metal ions and ligands, both of which have higher performance than the corresponding undoped MOFs. Among them, MIL-88B-NH2(V1Fe5) exhibits the highest photocatalytic bactericidal activity due to its suitable metal clusters ([M(μ3-O)] cluster) and topological structure (three-dimensional rhomboid network structure). This work demonstrated the amplification effect of V ion doping on electron transport in Fe-MOFs photocatalysts.

Selective oxidation of β-keto ester modulated by the d-band centers in D-A conjugated microporous metallaphotoredox catalysts containing M-salen (MZn, Cu and Co) and triazine monomers

Photocatalytic selective oxidation plays an important role in developing green chemistry. However, it is challenging to design an efficient photocatalyst for controlling the selectivity of photocatalytic oxidation reaction and exploring its detailed mechanism. Here, we synthesized three conjugated microporous polymers (CMPs) with D-A structures, named M-SATE-CMPs (MZn, Cu and Co), with different d-band centers based on different metal centers, resulting in the discrepancy in adsorption and activation capacities for the reactants, which produces the selectivity of β-keto esters being catalyzed into α-hydroperoxide β-keto esters (ROOH) or to α-hydroxyl β-keto esters (ROH). Density functional theory (DFT) calculations also demonstrate that the adsorption and activation capacities of the metal active centers in M-SATE-CMPs (MZn, Cu and Co) for ROOH are the key factors to influence the photocatalytic selective oxidation of β-keto ester. This study provides a promising strategy for designing a metallaphotoredox catalyst whose photocatalytic selectivity depends on the d-band center of metal site in the catalyst.

Metal-Organic Framework-Supported Mono Bipyridyl-Iron Hydroxyl Catalyst for Selective Benzene Hydroxylation into Phenol

Direct hydroxylation of benzene to phenol is more appealing in the industry for the economic and environmentally friendly phenol synthesis than the conventional cumene process. We have developed a UiO-metal-organic framework (MOF)-supported mono bipyridyl-Iron(II) hydroxyl catalyst [bpy-UiO-Fe(OH)2] for the selective benzene hydroxylation into phenol using H2O2 as the oxidant. The heterogeneous bpy-UiO-Fe(OH)2 catalyst showed high activity and remarkable phenol selectivity of 99%, giving the phenol mass-specific activity up to 1261 mmolPhOHgFe-1 h-1 at 60 °C. Bpy-UiO-Fe(OH)2 is significantly more active and selective than its homogeneous counterpart, bipyridine-Fe(OH)2. This enhanced catalytic activity of bpy-UiO-Fe(OH)2 over its homogeneous control is attributed to the active site isolation of the bpy-Fe(OH)2 moiety by the solid MOF that prevents intermolecular decomposition. Moreover, the exceptional selectivity of bpy-UiO-Fe(OH)2 in benzene to phenol conversion is originated via shape-selective catalysis, where the confined reaction space within the porous UiO-MOF prevents the formation of larger overoxidized products such as hydroquinone or benzoquinone, leading to the formation of only smaller-sized phenol after monohydroxylation of benzene. Spectroscopic and controlled experiments and theoretical calculations elucidated the reaction pathway, in which the in situ generated •OH radical mediated by bpy-UiO-FeII(OH)2 is the key species for benzene hydroxylation. This work underscores the significance of MOF-supported earth-abundant metal catalysts for sustainable production of fine chemicals.

Boosting the Efficiency of Photoactive Rod-Shaped Nanomotors via Magnetic Field-Induced Charge Separation

Photocatalytic nanomotors have attracted a lot of attention because of their unique capacity to simultaneously convert light and chemical energy into mechanical motion with a fast photoresponse. Recent discoveries demonstrate that the integration of optical and magnetic components within a single nanomotor platform offers novel advantages for precise motion control and enhanced photocatalytic performance. Despite these advancements, the impact of magnetic fields on energy transfer dynamics in photocatalytic nanomotors remains unexplored. Here, we introduce dual-responsive rod-like nanomotors, made of a TiO2/NiFe heterojunction, able to (i) self-propel upon irradiation, (ii) align with the direction of an external magnetic field, and (iii) exhibit enhanced photocatalytic performance. Consequently, when combining light irradiation with a homogeneous magnetic field, these nanomotors exhibit increased velocities attributed to their improved photoactivity. As a proof-of-concept, we investigated the ability of these nanomotors to generate phenol, a valuable chemical feedstock, from benzene under combined optical and magnetic fields. Remarkably, the application of an external magnetic field led to a 100% increase in the photocatalytic phenol generation in comparison with light activation alone. By using various state-of-the-art techniques such as photoelectrochemistry, electrochemical impedance spectroscopy, photoluminescence, and electron paramagnetic resonance, we characterized the charge transfer between the semiconductor and the alloy component, revealing that the magnetic field significantly improved charge pair separation and enhanced hydroxyl radical generation. Consequently, our work provides valuable insights into the role of magnetic fields in the mechanisms of light-driven photocatalytic nanomotors for designing more effective light-driven nanodevices for selective oxidations.

Method validation and characterization of stress degradation products of azelastine hydrochloride using LC-UV/PDA and LC-Q/TOF-MS studies

RATIONALE

Azelastine HCl is a second-generation H1 -receptor antagonist approved by the US Food and Drug Administration (US FDA) for treating seasonal allergic rhinitis and non-allergic vasomotor rhinitis. This study encompasses the validation of a liquid chromatography-ultra violet photo diode array (LC-UV/PDA) method for the drug and its extension to liquid chromatography/quadrupole time-of-flight mass spectrometry (LC-Q/TOF-MS) studies for identification and characterization of various stress degradation products of the drug.

METHODS

Stress degradation of azelastine HCl was undertaken under the International Council for Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH) prescribed conditions of hydrolytic, photolytic, oxidative, and thermal stress. The degraded drug solutions were analyzed using Ultra Performance Liquid Chromatography (UPLC) employing a C18 (100 × 4.6 mm; 2.6 μ, Kinetex) column by isocratic elution. Detection wavelength was 241 nm. The degradation products were identified and characterized using UPLC-MS/TOF studies, and an attempt was made to isolate one of the degradation products by solvent extraction.

RESULTS

The drug was found to significantly degrade under acidic/alkaline/neutral photolytic, oxidative, and alkaline hydrolytic conditions. Six degradation products (I-VI) were identified through LC-Q/TOF-MS studies that were adequately resolved from the drug with the developed UPLC method. All degradation products (I-VI) were ionized in the total ion chromatogram (TIC) in the LC-MS studies, and these were identified and characterized, and the degradation pathway of the drug was postulated. One of the oxidation products isolated from the degraded drug solution was characterized through differential scanning calorimetry, Fourier-transform infrared spectroscopy, and nuclear magnetic resonance spectral data.

CONCLUSIONS

Six degradation products generated from stress degradation studies on azelastine HCl were adequately resolved through LC-UV/PDA studies followed by method validation. These were successfully identified and characterized through LC-Q/TOF-MS studies, and the degradation pathways for the generation of these products from the drug have been postulated.

An iron-containing POM-based hybrid compound as a heterogeneous catalyst for one-step hydroxylation of benzene to phenol

It is a major challenge to perform one-pot hydroxylation of benzene to phenol under mild conditions, which replaces the environmentally harmful cumene method. Thus, finding highly efficient heterogeneous catalysts that can be recycled is extremely significant. Herein, a (POM)-based hybrid compound {[FeII(pyim)2(C2H5O)][FeII(pyim)2(H2O)][PMoV2MoVI9VIV3O42]}·H2O (pyim = 2-(2-pyridyl)benzimidazole) (Fe2-PMo11V3) was successfully prepared by hydrothermal synthesis using typical Keggin POMs, iron ions and pyim ligands. Single-crystal diffraction shows that the Fe-pyim unit in Fe2-PMo11V3 forms a stable double-supported skeleton by Fe-O bonding to the polyacid anion. Remarkably, due to the introduction of vanadium, Fe2-PMo11V3 forms a divanadium-capped conformation. Benzene oxidation experiments indicated that Fe2-PMo11V3 can catalyze the benzene hydroxylation reaction to phenol in a mixed solution of acetonitrile and acetic acid containing H2O2 at 60 °C, affording a phenol yield of about 16.2% and a selectivity of about 94%.

Reticular framework materials for photocatalytic organic reactions

Photocatalytic organic reactions, harvesting solar energy to produce high value-added organic chemicals, have attracted increasing attention as a sustainable approach to address the global energy crisis and environmental issues. Reticular framework materials, including metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), are widely considered as promising candidates for photocatalysis owing to their high crystallinity, tailorable pore environment and extensive structural diversity. Although the design and synthesis of MOFs and COFs have been intensively developed in the last 20 years, their applications in photocatalytic organic transformations are still in the preliminary stage, making their systematic summary necessary. Thus, this review aims to provide a comprehensive understanding and useful guidelines for the exploration of suitable MOF and COF photocatalysts towards appropriate photocatalytic organic reactions. The commonly used reactions are categorized to facilitate the identification of suitable reaction types. From a practical viewpoint, the fundamentals of experimental design, including active species, performance evaluation and external reaction conditions, are discussed in detail for easy experimentation. Furthermore, the latest advances in photocatalytic organic reactions of MOFs and COFs, including their composites, are comprehensively summarized according to the actual active sites, together with the discussion of their structure-property relationship. We believe that this study will be helpful for researchers to design novel reticular framework photocatalysts for various organic synthetic applications.

Metal-organic frameworks as photocatalysts in energetic and environmental applications

Metal-organic frameworks (MOFs) are an exciting new class of porous materials with great potential for photocatalytic applications in the environmental and energy sectors. MOFs provide significant advantages over more traditional materials when used as photocatalysts due to their high surface area, adaptable topologies, and functional ability. In this article, we summarize current developments in the use of MOFs as photocatalysts for a variety of applications, such as CO2 reduction, water splitting, pollutant degradation, and hydrogen production. We discuss the fundamental properties of MOFs that make them ideal for photocatalytic applications, as well as strategies for improving their performance. The opportunities and challenges presented by this rapidly expanding field are also highlighted.

Enabling Specific Benzene Oxidation by Tuning the Adsorption Behavior on Au Loaded MgAl Layered Double Hydroxides

Direct and selective oxidation of benzene to phenol is a long-term goal in industry. Although great efforts have been made in homogenous catalysis, it still remains a huge challenge to drive this reaction via heterogeneous catalysts under mild conditions. Herein, a single-atom Au loaded MgAl-layered double hydroxide (Au1 -MgAl-LDH) with a well-defined structure, in which the Au single atoms are located on the top of Al3+ with Au-O4 coordination as revealed by extended x-ray-absorption fine-structure (EXAFS)and density-functional theory (DFT)calculation is reported. The photocatalytic results prove the Au1 -MgAl-LDH is capable of driving benzene oxidation reaction with O2 in water, and exhibits a high selectivity of 99% for phenol. While contrast experiment shows a ≈99% selectivity for aliphatic acid with Au nanoparticle loaded MgAl-LDH (Au-NP-MgAl-LDH). Detailed characterizations confirm that the origin of the selectivity difference can be attributed to the profound adsorption behavior of substrate benzene with Au single atoms and nanoparticles. For Au1 -MgAl-LDH, single Au-C bond is formed in benzene activation and result in the production of phenol. While for Au-NP-MgAl-LDH, multiple AuC bonds are generated in benzene activation, leading to the crack of CC bond.

g-C3N4-modified Zr-Fc MOFs as a novel photocatalysis-self-Fenton system toward the direct hydroxylation of benzene to phenol

In order to explore a green, economic, and sustainable phenol production process, a heterojunction semiconductor materials g-C₃N₄/Zr-Fc MOF was synthesized via an in situ synthesis method. With the synergistic effect of photocatalysis and the Fenton effect, the composite could effectively catalyze the direct hydroxylation of benzene to phenol under visible light irradiation. The yield of phenol and the selectivity were 13.84% and 99.38% under the optimal conditions, respectively, and it could still maintain high photocatalytic activity after 5 photocatalytic cycles. Therefore, the designed photocatalysis-self-Fenton system has great potential in the field of the direct hydroxylation of benzene to phenol.

Recent advances of metal-organic framework-based and derivative materials in the heterogeneous catalytic removal of volatile organic compounds

Since the environmental hazards of volatile organic compounds (VOCs) are well known, heterogeneous catalysis has become one of the most popular methods to treat VOCs due to its environmental friendliness and simplicity of operation. Although a large number of reports have reviewed the application of catalytic oxidation for the degradation of VOCs, relatively few reports are based on this direction of metal organic frameworks (MOFs) and MOF derivatives. Herein, this paper reviews the recent applications of heterogeneous catalytic technologies in the degradation of VOCs, including photocatalysis, thermal catalysis and other catalytic approaches. The applications of MOFs and their derivatives in VOCs degradation, such as the progress of MOF-derived metal oxides in the treatment of toluene, were highlighted. The mechanisms of VOCs degradation by different catalytic approaches were systematically presented. Finally, we presented the views and directions of VOCs treatment technology development. We hope that this reaction type-oriented review will provide important insights into MOFs and MOF-derived materials for VOCs pollution control.

The MIL100(Fe)/BaTi0.85Zr0.15O3 nanocomposite with the photocatalytic capability for study of tetracycline photodegradation kinetics

The visible light-active nanocomposite with the photocatalytic capability was facile one-pot solvothermal method successfully synthesized. X-ray diffraction (XRD), Thermogravimetry and Derivative Thermogravimetry (TG-DTG), Scanning Electron Microscopy with Energy Dispersive X-ray Analysis (SEM-EDX), Diffuse Reflectance Spectroscopy (UV-Vis DRS), and Fourier Transform Infra-Red (FT-IR) analysis were employed to characterize the synthetized BaTi_0.85Zr_0.15O3, MIL-100(Fe), and the MIL-100(Fe)/BaTi_0.85Zr_0.15O₃ samples. As a result of the Scherrer equations, the size of grains for MIL-100(Fe), BaTi_0.85Zr_0.15O₃, and MIL-100(Fe)/BaTi_0.85Zr_0.15O₃ was estimated to be 40.81, 12.00, and 22.70 nm, respectively. MIL-100(Fe), BaTi_0.85Zr_0.15O₃, and MIL-100(Fe)/BaTi_0.85Zr_0.15O₃ samples showed bandgap values of 1.77, 3.02, and 2.56 determined from their absorption edge wavelengths. In the photodegraded solutions, chemical oxygen demand (COD) data and tetracycline (TC) absorbencies were used to obtain the rate constants of 0.032 min^-1 and 0.030 min^-1, respectively. This corresponds to t_1/2-values of 27.7 min and 21.7 min, respectively, for the degradation and mineralization of TC molecules during photodegradation process.

Collaborative Purification of Tert-Butanol and N2O over Fe/Co-Zeolite Catalysts

N₂O is a greenhouse gas and a candidate oxidant. Volatile organic pollutants (VOCs) have caused great harm to the atmospheric ecological environment. Developing the technique utilizing N₂O as the oxidant to oxidize VOCs to realize the collaborative purification has significant importance and practical value for N₂O emission control and VOC abatement. Therefore, the study of N₂O catalytic oxidation of tert-butanol based on zeolite catalysts was carried out. A series of molecular sieves, including FER, MOR, ZSM-5, Y, and BEA, were selected as the catalyst objects, and the 1.5% wt Fe and Co were, respectively, loaded on the zeolite catalysts via the impregnation method. It was found that the catalytic performance of BEA was the best among the molecular sieves. Comparing the catalytic performance of Fe-BEA under different load gradients (0.25~2%), it was found that 1.5% Fe-BEA possessed the best catalytic activity. A series of characterization methods showed that Fe³⁺ content in 1.5% Fe-BEA was the highest, and more active sites formed to promote the catalytic reaction. The α-O in the reaction eventually oxidized tert-butanol to CO₂ over the active site. The Co mainly existed in the form of Co²⁺ cations over Co-BEA samples; the 2% Co-BEA possessing higher amounts of Co²⁺ exhibited the highest activity among the prepared Co-BEA samples.

Fabrication of Fe-BTC on aramid fabrics for repeated degradation of isoproturon

Catalytic degradation is a promising and ideal technology in environmental remediation. Among them, catalytic oxidation and photocatalysis respectively based on catalysts and photocatalysts both trigger broad interests because of their high removal activity. However, the reusability of the powder catalysts still faces substantial challenges. Here, a simple strategy is proposed to load Fe-BTC catalyst on aramid fabrics (AF) to construct Fe-BTC MOF @ aramid fabric (Fe-BTC@AF) composite materials with layer-by-layer in situ self-assembly methods. The experimental results illustrated that 98% isoproturon could be removed by Fe-BTC@AF₂₀ with oxidant H₂O₂, while the single Fe-BTC@AF₂₀ could photo-degrade 99% isoproturon within 7 h. Meanwhile, it could sustain a high degradation rate of more than 80%, even if it had gone through 5 degradation cycles. Thus, the Fe-BTC@AF composite has a significant advantage in the recycling ability for degradation of isoproturon, which will have potential applications in the efficient removal of organic contaminants in water.

Recent Advances in the Development of Novel Iron–Copper Bimetallic Photo Fenton Catalysts

Advanced oxidation processes (AOPs) have been postulated as viable, innovative, and efficient technologies for the removal of pollutants from water bodies. Among AOPs, photo-Fenton processes have been shown to be effective for the degradation of various types of organic compounds in industrial wastewater. Monometallic iron catalysts are limited in practical applications due to their low catalytic activity, poor stability, and recyclability. On the other hand, the development of catalysts based on copper oxides has become a current research topic due to their advantages such as strong light absorption, high mobility of charge carriers, low environmental toxicity, long-term stability, and low production cost. For these reasons, great efforts have been made to improve the practical applications of heterogeneous catalysts, and the bimetallic iron–copper materials have become a focus of research. In this context, this review focuses on the compilation of the most relevant studies on the recent progress in the application of bimetallic iron–copper materials in heterogeneous photo–Fenton-like reactions for the degradation of pollutants in wastewater. Special attention is paid to the removal efficiencies obtained and the reaction mechanisms involved in the photo–Fenton treatments with the different catalysts.

Rational Design of a Core-Shell Structured Plasmonic Au@MIL-100(Fe) Nanocomposite for Efficient Photocatalysis

The utilization of solar light to trigger organic syntheses for the production of value-added chemicals has attracted increasing recent research attention. The integration of plasmonic Au NPs (NPs = nanoparticles) with MOFs would provide a new way for the development of highly efficient photocatalytic systems. In this manuscript, a bottle-around-ship strategy was adopted for the successful synthesis of a core-shell structured Au_pvp@MIL-100(Fe) (PVP = polyvinylpyrrolidone) nanocomposite in room temperature. The as-obtained core-shell structured Au_pvp@MIL-100(Fe) show improved photocatalytic performance for benzyl alcohol oxidation under visible light, because of the migration of the surface plasmon resonance (SPR) excited hot electrons from plasmonic Au NPs to MIL-100(Fe), resulting in the production of more active O₂^•- radicals. The removal of the capping agent PVP from Au_pvp@MIL-100(Fe) significantly enhanced the photocatalytic performance, because of an improved charge transfer from plasmonic Au NPs to MIL-100(Fe). This study demonstrates an efficient strategy of fabricating superior photocatalytic systems by a rational coupling of plasmonic Au NPs and photocatalytic active MOFs into a core-shell structured nanocomposite.

Recent Insight in Transition Metal Anchored on Nitrogen-Doped Carbon Catalysts: Preparation and Catalysis Application

The design and preparation of novel, high-efficiency, and low-cost heterogeneous catalysts are important topics in academic and industry research. In the past, inorganic materials, metal oxide, and carbon materials were used as supports for the development of heterogeneous catalysts due to their excellent properties, such as high specific surface areas and tunable porous structures. However, the properties of traditional pristine carbon materials cannot keep up with the sustained growth and requirements of industry and scientific research, since the introduction of nitrogen atoms into carbon materials may significantly enhance a variety of their physicochemical characteristics, which gradually become appropriate support for synthesizing supported transition metal catalysts. In the past several decades, the transition metal anchored on nitrogen-doped carbon catalysts has attracted a tremendous amount of interest as potentially useful catalysts for diverse chemical reactions. Compared with original carbon support, the doping of nitrogen atoms can significantly regulate the physicochemical properties of carbon materials and allow active metal species uniformly dispersed on the support. The various N species in support also play a critical role in accelerating the catalytic performance in some reactions. Besides, the interaction between support and transition metal active sites can offer an anchor site to stabilize metal species during the preparation process and then improve reaction performance, atomic utilization, and stability. In this review, we highlight the recent advances and the remaining challenges in the preparation and application of transition metal anchored on nitrogen-doped carbon catalysts.

Metal-organic framework MIL-100(Fe) as a promising sensor for COVID-19 biomarkers detection

The development of fast and non-invasive techniques to detect SARS-CoV-2 virus at the early stage of the infection would be highly desirable to control the COVID-19 outbreak. Metal-organic frameworks (MOFs) are porous materials with uniform porous structures and tunable pore surfaces, which would be essential for the selective sensing of the specific COVID-19 biomarkers. However, the use of MOFs materials to detect COVID-19 biomarkers has not been demonstrated so far. In this work, for the first time, we employed the density functional theory calculations to investigate the specific interactions of MOFs and the targeted biomarkers, in which the interactions were confirmed by experiment. The five dominant COVID-19 biomarkers and common exhaled gases are comparatively studied by exposing them to MOFs, namely MIL-100(Al) and MIL-100(Fe). The adsorption mechanism, binding site, adsorption energy, recovery time, charge transfer, sensing response, and electronic structures are systematically investigated. We found that MIL-100(Fe) has a higher sensing performance than MIL-100(Al) in terms of sensitivity and selectivity. MIL-100(Fe) shows sensitive to COVID-19 biomarkers, namely 2-methylpent-2-enal and 2,4-octadiene with high sensing responses as 7.44 x 10⁵ and 9 x 10⁷ which are exceptionally higher than those of the common gases which are less than 6. The calculated recovery times of 0.19 and 1.84 x 10^-4 s are short enough to be a resuable sensor. An experimental study also showed that the MIL-100(Fe) provides a sensitivity toward 2-methylpent-2-enal. In conclusion, we suggest that MIL-100(Fe) could be used as a potential sensor for the exhaled breath analysis. We hope that our research can aid in the development of a biosensor for quick and easy COVID-19 biomarker detection in order to control the current pandemic.

Recent Advances in the Heterogeneous Photocatalytic Hydroxylation of Benzene to Phenol

Phenol is an important chemical material that is widely used in industry. Currently, phenol is dominantly produced by the well−known three−step cumene process, which suffers from severe drawbacks. Therefore, developing a green, sustainable, and economical strategy for the production of phenol directly from benzene is urgently needed. In recent years, the photocatalytic hydroxylation of benzene to phenol, which is economically feasible and could be performed under mild conditions, has attracted more attention, and development of highly efficient photocatalyst would be a key issue in this field. In this review, we systematically introduce the recent achievements of photocatalytic hydroxylation of benzene to phenol from 2015 to mid−2022, and various heterogeneous photocatalysts are comprehensively reviewed, including semiconductors, polyoxometalates (POMs), graphitic carbon nitride (g−C3N4), metal–organic frameworks (MOFs), carbon materials, and some other types of photocatalysts. Much effort is focused on the physical and chemical approaches for modification of these photocatalysts. The challenges and future promising directions for further enhancing the catalytic performances in photocatalytic hydroxylation of benzene are discussed in the end.

A novel SERS substrate of MIL-100(Fe)/AgNFs for sensitive detection of ascorbic acid in cellular media

A novel SERS substrate of MIL-100(Fe)/AgNFs was firstly prepared for sensitive and selective detection of ascorbic acid (L-AA), with a LOD of 10-11 M. A spectral decrease of MIL-100(Fe)/AgNFs towards L-AA solution thanks to the efficient capture and reduction of Fe3+ in MIL-100(Fe) constituted the assay, which was demonstrated to function well in food samples and in cellular media for L-AA sensing.

Metal organic framework-based antibacterial agents and their underlying mechanisms

Bacteria, as the most abundant living organisms, have always been a threat to human life until the development of antibiotics. However, with the wide use of antibiotics over a long time, bacteria have gradually gained tolerance to antibiotics, further aggravating threat to human beings and environmental safety significantly. In recent decades, new bacteria-killing methods based on metal ions, hyperthermia, free radicals, physical pricks, and the coordination of several multi-mechanisms have attracted increasing attention. Consequently, multiple types of new antibacterial agents have been developed. Among them, metal organic frameworks (MOFs) appear to play an increasingly important role. The unique characteristics of MOFs make them suitable multiple-functional platforms. By selecting the appropriate metastable coordination bonds, MOFs can act as reservoirs and release antibacterial metal ions or organic linkers; by constructing a porous structure, MOFs can act as carriers for multiple types of agents and achieve slow and sustained release; and by designing their composition and the pore structure precisely, MOFs can be endowed with properties to produce heat and free radicals under stimulation. Importantly, in combination with other materials, MOFs can act as a platform to kill bacteria effectively through the synergistic effect of multiple types of mechanisms. In this review, we focus on the recent development of MOF-based antibacterial agents, which are classified according to their antibacterial mechanisms.

Photocatalytic degradation of gaseous benzene using metal oxide nanocomposites

Rapid industrial growth has been accompanied by the pollution of hazardous volatile organic pollutants (VOCs) in air. Among various options available for the treatment of VOCs, the use of metal oxide composites as photocatalysts has been adopted preferably due to their potential to induce the synergistic interactions between the metal nanoparticles (NPs) and metal oxides (especially titanium dioxide (TiO₂)). In this context, an in-depth review is offered to describe the fundamental mechanism of metal oxide-based photocatalysis for the oxidation of gaseous benzene as a model VOC. The discussion has been extended further to evaluate their performances in terms of key performance metrics (e.g., quantum yield (QY), space-time yield (STY), and figure of merit (FOM)). The TiO₂-based metallic bi-component photocatalysts (e.g., Sr₂CeO₄/TiO₂) generally exhibited better photodegradation efficiency with enhanced light absorption capability than monometallic-TiO₂ (e.g., Pd-TiO₂) composites or other modified photocatalysts (e.g., metal-organic framework (MOF)-based composites). Finally, we address the current challenges and future perspectives in this highly challenging research field.

Simplified creation of polyester fabric supported Fe-based MOFs by an industrialized dyeing process: Conditions optimization, photocatalytics activity and polyvinyl alcohol removal

MIL-53(Fe) was successfully prepared and deposited on the surface carboxylated polyester (PET) fiber by an optimized conventional solvothermal or industrialized high temperature pressure exhaustion (HTPE) process to develop a PET fiber supported MIL-53(Fe) photocatalyst (MIL-Fe@PET) for the degradation of polyvinyl alcohol (PVA) in water under light emitting diode (LED) visible irradiation. On the basis of several characterizations, MIL-Fe@PET was tested for the photocalytic ability and degradation mechanism. It was found that temperature elevation significantly enhanced the formation and deposition of MIL-53(Fe) with better photocatalytic activity. However, higher temperature than 130°C was not in favor of its photocatalytic activity. Increasing the number of surface carboxyl groups of the modified PET fiber could cause a liner improvement in MIL-53(Fe) loading content and photocatalytic ability. High visible irradiation intensity also dramatically increased photocatalytic ability and PVA degradation efficiency of MIL-Fe@PET. Na₂S₂O₈ was used to replace H₂O₂ as electron acceptor for further promoting PVA degradation in this system. MIL-Fe@PET prepared by HTPE process showed higher MIL-53(Fe) loading content and slightly lower PVA degradation efficiency than that prepared by solvothermal process at the same conditions. These findings provided a practical strategy for the large-scale production of the supported MIL-53(Fe) as a photocatalyst in the future.

MIL series of metal organic frameworks (MOFs) as novel adsorbents for heavy metals in water: A review

With large specific surface area, abundant adsorption sites, flexible pore structure, and good water stability, Materials of Institute Lavoisier frameworks (MILs) have attracted increasing attention as effective environmental adsorbents. This review systematically analyzes and recapitulates recent progress in the synthesis and application of MIL-based adsorbents for the removal of aqueous heavy metal ions. Commonly used solvothermal, microwave, electrochemical, ultrasonic, and mechanochemical syntheses of MILs are first summarized and compared. Instead of focusing on adsorption process parameters, adsorption performances and governing mechanisms of virgin MILs, functional MILs, MIL-based composites, and carbonized MILs to representative metal(loid) ions (chromium, arsenic, lead, cadmium, and mercury) in water under various conditions are then systematically reviewed and discussed. In the end, this work also outlines prospects and future directions to promote the applications of MILs in treating heavy metal contaminated water.

Carbon nanotube filter functionalized with MIL-101(Fe) for enhanced flow-through electro-Fenton

Herein, an electrochemical carbon nanotubes (CNT) filter modified with MIL-101(Fe) has been designed for the electro-Fenton applications by serving as a functional flow-through electrode. Under an electric field, the hybrid filter enabled the in situ generation of H₂O₂via the two-electron oxygen reduction reaction, which promoted the production of HO by the accelerated Fe²⁺/Fe³⁺ cycling of MIL-101(Fe). It was observed that 93.2 ± 1.2% tetracycline and 69.0 ± 0.8% total organic carbon (TOC) were removed in 2 h under the optimized conditions. The electron paramagnetic resonance (EPR) analysis and radical scavenging experiments revealed that HO predominated the tetracycline degradation. As compared to the batch reactor, the performance of the proposed system was improved by 5.6 times owing to the convection-enhanced mass transport. The plausible working mechanism and degradation pathway were also subsequently proposed. The findings reported in this study provide a promising insight for the environmental remediation by integrating nanotechnology and Fenton chemistry.

Lewis acid-triggered photocatalytic hydrogen peroxide production in an aluminum-based metal–organic framework

Al-based MIL-101-NH2, which was previously regarded as having silent photo-features, exhibits photocatalytic H2O2 production via O2 reduction accompanied by efficient suppression of undesired H2O2 decomposition.

Catalytic properties of the ferryl ion in the solid state: a computational review

This review summarises the last findings in the emerging field of heterogeneous catalytic oxidation of light alkanes by ferryl species supported on solid-state systems such as the conversion of methane into methanol by FeO-MOF74.

The enhanced photocatalytic activity of TiO2(B)/MIL-100(Fe) composite via Fe–O clusters

An integrated TiO2(B)/MIL-100(Fe) composite was designed for improving photocatalytic activity via Fe–O–Ti electronic tunnel and Fe–O clusters.