Catalysis by Supported Single Metal Atoms

A high oxidase-like activity, bimetallic single-atom nanozyme FeCe/NC prepared by FeCe-ZIF-8 approach for sensing tannic acid in tea

To improve the activity of single-atom nanozymes (SAzymes) for applications in food analysis, a new bimetal SAzyme FeCe/NC was developed. Its oxidase-like activity is 40% higher than that of single metal SAzyme Fe/NC. Based on a series of characterization investigations, the catalytic mechanism is that it directly catalyzed O2 to generate •OH, O2 •-and 1O2. It could directly catalyze oxidation 3,3',5,5'-tetramethylbenzidine (TMB) to blue oxTMB, thereunder, a FeCe/NC SAzyme-TMB colorimetric method for the detection of tannic acid (TA) was constructed after the optimization of catalytic conditions. The method has a high R2 of 0.995, a low limit of detection (LOD) of 0.26 μmol/L, and high stability. The detection performance was validated by the real samples (tea). Therefore, the prepared bimetallic SAzyme FeCe/NC can be applied for TA detection without the addition of H2O2, and will have broad applications in the areas of food, feed, and life science.

Single-atom nanozymes: Emerging talent for sensitive detection of heavy metals

In recent years, the increasingly severe pollution of heavy metals has posed a significant threat to the environment and human safety. Heavy metal ions are highly non-biodegradable, with a tendency to accumulate through biomagnification. Consequently, accurate detection of heavy metal ions is of paramount importance. As a new type of synthetic nanomaterials, single-atom nanozymes (SANs) boast exceptional enzyme-like properties, setting them apart from natural enzymes. This unique feature affords SANs with a multitude of advantages such as dispersed active sites, low cost and variety of synthetic methods over natural enzymes, making them an enticing prospect for various applications in industrial, medical and biological fields. In this paper, we systematically summarize the synthetic methods and catalytic mechanisms of SANs. We also briefly review the analytical methods for heavy metal ions and present an overall overview of the research progress in recent years on the application of SANs in the detection of environmental heavy metal ions. Eventually, we propose the existing challenges and provide a vision for the future.

Tuning catalytic performance of platinum single atoms by choosing the shape of cerium dioxide supports

The local coordination environment of single atom catalysts (SACs) often determines their catalytic performance. To understand these metal-support interactions, we prepared Pt SACs on cerium dioxide (CeO2) cubes, octahedra and rods, with well-structured exposed crystal facets. The CeO2 crystals were characterized by SEM, TEM, pXRD, and N2 sorption, confirming the shape-selective synthesis, identical bulk structure, and variations in specific surface area, respectively. EPR, XPS, TEM and XANES measurements showed differences in the oxygen vacancy density following the trend rods > octahedra > cubes. AC-HAADF-STEM, XPS and CO-DRIFTS measurements confirmed the presence of only single Pt2+ sites, with different surface platinum surface concentrations. We then compared the performance of the three catalysts in ammonia borane hydrolysis. Precise monitoring of reaction kinetics between 30-80 °C gave Arrhenius plots with hundreds of data points. All plots showed a clear inflection point, the temperature of which (rods > octahedra > cubes) correlates to the energy barrier of ammonia borane diffusion to the Pt sites. These activity differences reflect variations in the - facet dependent - degree of stabilization of intermediates by surface oxygen lone pairs and surface-metal binding strength. Our results show how choosing the right macroscopic support shape can give control over single atom catalysed reactions on the microscopic scale.

Atomically dispersed single-atom catalysts (SACs) and enzymes (SAzymes): synthesis and application in Alzheimer's disease detection

Alzheimer's disease (AD) is a progressive neurodegenerative disorder characterized by cognitive decline and memory loss. Conventional diagnostic methods, such as neuroimaging and cerebrospinal fluid analysis, typically detect AD at advanced stages, limiting the efficacy of therapeutic interventions. Early detection is crucial for improving patient condition by enabling timely administration of treatments that may decelerate disease progression. In this context, single-atom catalysts (SACs) and single-atom nanozymes (SAzymes) have emerged as promising tools offering highly sensitive and selective detection of Alzheimer's biomarkers. SACs, consisting of isolated metal atoms on a support surface, deliver unparalleled atomic efficiency, increased reactivity, and reduced operational costs, although certain challenges in terms of stability, aggregation, and other factors persist. The advent of SAzymes, which integrate SACs with natural metalloprotease catalysts, has further advanced this field by enabling controlled electronic exchange, synergistic productivity, and enhanced biosafety. Particularly, M-N-C SACs with M-Nx active sites mimic the selectivity and sensitivity of natural metalloenzymes, providing a robust platform for early detection of AD. This review encompasses the advancements in SACs and SAzymes, highlighting their pivotal role in bridging the gap between conventional enzymes and nanozyme and offering enhanced catalytic efficiency, controlled electron transfer, and improved biosafety for Alzheimer's detection.

Effect of External Electric Field on Nitrogen Activation on a Trimetal Cluster

Efficient nitrogen (N2) fixation and activation under mild conditions are crucial for modern society. External electric fields (Felectric) can significantly affect N2 activation. In this work, the effect of Felectric on N2 activation by Nb3 clusters supported in a sumanene bowl was studied by density functional theory calculations. Four typical systems at different stages of N-N activation were studied, including two intermediates and two transition states. The impact of Felectric on various properties related to N2 activation was investigated, including the N-N bond length, overlap population density of states (OPDOS), total energy of the system, adsorption energy of N2, decomposition of energy changes, and electron transfer. The sumanene not only functions as a support and protective substrate, but also serves as a donor or acceptor under different Felectric conditions. Negative Felectric is beneficial to N-N bond activation because it promotes electron transfer to the N-N region and improves the d-π* orbital hybridization between metals and N2 in the activation process. Positive Felectric improves d-π* orbital hybridization only when the N-N is nearly dissociated. The microscopic mechanism of Felectric's effects provides insight into N2 activation and theoretical guidance for the design of catalytic reaction conditions for nitrogen reduction reactions (NRR).

Porous alumina nanosheet-supported asymmetric platinum clusters for efficient diboration of alkynes

Precisely designing asymmetrical structures is an effective strategy to optimize the performance of metallic catalysts. Asymmetric Pt clusters were attached to defect-rich porous alumina nanosheets (Pt clu/dp-Al2O3) using a pyrolysis technique coupled with wet impregnation. These Pt-functionalized nanosheets feature a high concentration of active sites, demonstrating remarkable cycling performance and catalytic activity in alkyne diboration. The conversion yield and selectivity can reach up to 97% and 95%, correspondingly.

Sulfur Modified Carbon-Based Single-Atom Catalysts for Electrocatalytic Reactions

Efficient and sustainable energy development is a powerful tool for addressing the energy and environmental crises. Single-atom catalysts (SACs) have received high attention for their extremely high atom utilization efficiency and excellent catalytic activity, and have broad application prospects in energy development and chemical production. M-N4 is an active center model with clear catalytic activity, but its catalytic properties such as catalytic activity, selectivity, and durability need to be further improved. Adjustment of the coordination environment of the central metal by incorporating heteroatoms (e.g., sulfur) is an effective and feasible modification method. This paper describes the precise synthetic methods for introducing sulfur atoms into M-N4 and controlling whether they are directly coordinated with the central metal to form a specific coordination configuration, the application of sulfur-doped carbon-based single-atom catalysts in electrocatalytic reactions such as ORR, CO2RR, HER, OER, and other electrocatalytic reaction are systematically reviewed. Meanwhile, the effect of the tuning of the electronic structure and ligand configuration parameters of the active center due to doped sulfur atoms with the improvement of catalytic performance is introduced by combining different characterization and testing methods. Finally, several opinions on development of sulfur-doped carbon-based SACs are put forward.

Single-Atom based Metal-Organic Framework Photocatalysts for Solar-Fuel Generation

The growing demand for fossil fuels and subsequent CO2 emissions prompted a search for alternate sources of energy and a reduction in CO2. Photocatalysis driven by solar light has been found as a potential research area to tackle both these problems. In this direction, SAC@MOF (Single-atom loaded MOFs) photocatalysis is an emerging field and a promising technology. The unique properties of single-atom catalysts (SACs), such as high catalytic activity and selectivity, are leveraged in these systems. Photocatalysis, focusing on the utilization of Metal-Organic Frameworks (MOFs) as platforms for creating single-atom catalysts (SACs) characterized by metal single-atoms (SAs) as their active sites, are noted for their unparalleled atomic efficiency, precisely defined active sites, and superior photocatalytic performance. The synergy between MOFs and SAs in photocatalytic systems is meticulously examined, highlighting how they collectively enhance photocatalytic efficiency. This review examines SAC@MOF development and applications in environmental and energy sectors, focusing on synthesis and stabilization methods for SACs on MOFs and also characterization techniques vital for understanding these catalysts. The potential of SAC@MOF in CO2 Photoreduction and Photocatalytic H2 evolution is highlighted, emphasizing its role in green energy technologies and advances in materials science and Photocatalysis.

High-area alumina supported Cu-Ce atomic species for water-gas shift reaction

Atomically dispersed cerium species, anchored to high-area alumina by unsaturated penta-coordinated aluminum, strongly interact with atomically dispersed Cu species to provide active centers for water-gas shift reaction (WGSR). The alumina-anchored Ce3+ species stabilize atomically dispersed Cu+ to form Cu+-Ce3+ active complexes and they work synergistically to enhance low-temperature WGSR activity. This work offers alternative approaches to developing low-cost catalysts for the WGSR process.

The Adsorption Behavior of Gas Molecules on Mn/N- and Mn-Doped Graphene

By using density functional theory (DFT), the adsorption behavior of gas molecules on defective graphene doped with manganese and nitrogen were investigated. The geometric structure, electronic structure, and magnetic properties of two substrates were calculated and the sensing mechanism was also analyzed. The results indicate that the MnSV-GP and MnN3-GP have stronger structural stability, in which Mn atoms and their coordination atoms will become the adsorption point for five gas molecules (CH2O, CO, N2O, SO2, and NH3), respectively. Moreover, at room temperature (298 K), the recovery time of the MnSV-GP sensor for N2O gas molecules is approximately 1.1 s. Therefore, it can be concluded that the MnSV-GP matrix as a magnetic gas sensor has a promising potential for detecting N2O. These results also provide a new pathway for the potential application of Mn-doped graphene in the field of gas sensors.

Single Entity Electrocatalysis

Making a measurement over millions of nanoparticles or exposed crystal facets seldom reports on reactivity of a single nanoparticle or facet, which may depart drastically from ensemble measurements. Within the past 30 years, science has moved toward studying the reactivity of single atoms, molecules, and nanoparticles, one at a time. This shift has been fueled by the realization that everything changes at the nanoscale, especially important industrially relevant properties like those important to electrocatalysis. Studying single nanoscale entities, however, is not trivial and has required the development of new measurement tools. This review explores a tale of the clever use of old and new measurement tools to study electrocatalysis at the single entity level. We explore in detail the complex interrelationship between measurement method, electrocatalytic material, and reaction of interest (e.g., carbon dioxide reduction, oxygen reduction, hydrazine oxidation, etc.). We end with our perspective on the future of single entity electrocatalysis with a key focus on what types of measurements present the greatest opportunity for fundamental discovery.

Carbon-based single-atom catalysts derived from biomass: Fabrication and application

Single-atom catalysts (SACs) with active metals dispersed atomically have shown great potential in heterogeneous catalysis due to the high atomic utilization and superior selectivity/stability. Synthesis of SACs using carbon-neutral biomass and its components as the feedstocks provides a promising strategy to realize the sustainable and cost-effective SACs preparation as well as the valorization of underused biomass resources. Herein, we begin by describing the general background and status quo of carbon-based SACs derived from biomass. A detailed enumeration of the common biomass feedstocks (e.g., lignin, cellulose, chitosan, etc.) for the SACs preparation is then offered. The interactions between metal atoms and biomass-derived carbon carriers are summarized to give general rules on how to stabilize the atomic metal centers and rationalize porous carbon structures. Furthermore, the widespread adoption of catalysts in diverse domains (e.g., chemocatalysis, electrocatalysis and photocatalysis, etc.) is comprehensively introduced. The structure-property relationships and the underlying catalytic mechanisms are also addressed, including the influences of metal sites on the activity and stability, and the impact of the unique structure of single-atom centers modulated by metal/biomass feedstocks interactions on catalytic activity and selectivity. Finally, we end this review with a look into the remaining challenges and future perspectives of biomass-based SACs. We expect to shed some light on the forthcoming research of carbon-based SACs derived from biomass, manifestly stimulating the development in this emerging research area.

Synergistic effect between transition metal single atom and SnS2 toward deep CO2 reduction

The electrochemical reduction of CO2 is an efficient channel to facilitate energy conversion, but the rapid design and rational screening of high-performance catalysts remain a great challenge. In this work, we investigated the relationships between the configuration, energy, and electronic properties of SnS2 loaded with transition metal single atom (TM@SnS2) and analyzed the mechanism of CO2 activation and reduction by using density functional theory. The "charge transfer bridge" promoted the adsorption of CO2 on TM@SnS2, thus enhancing the binding of HCOOH∗ to the catalyst for further hydrogenation and reduction to high-value CH4. The research revealed that the binding free energy of COOH∗ on TM@SnS2 formed a "volcano curve" with the limiting potential of CO2 reduction to CH4, and the TM@SnS2 (TM = Cr, Ru, Os, and Pt) at the "volcano top" exhibited a high CH4 activity.

Rational Design of Non-Noble Metal Single-Atom Catalysts in Lithium-Sulfur Batteries through First Principles Calculations

Lithium-sulfur (Li-S) batteries with a high theoretical energy density of 2600 Wh·kg-1 are hindered by challenges such as low S conductivity, the polysulfide shuttle effect, low S reduction conversion rate, and sluggish Li2S oxidation kinetics. Herein, single-atom non-noble metal catalysts (SACs) loaded on two-dimensional (2D) vanadium disulfide (VS2) as the potential host materials for the cathode in Li-S batteries were investigated systematically by using first-principles calculations. Based on the comparisons of structural stability, the ability to immobilize sulfur, electrochemical reactivity, and the kinetics of Li2S oxidation decomposition between these non-noble metal catalysts and noble metal candidates, Nb@VS2 and Ta@VS2 were identified as the potential candidates of SACs with the decomposition energy barriers for Li2S of 0.395 eV (Nb@VS2) and of 0.162 eV (Ta@VS2), respectively. This study also identified an exothermic reaction for Nb@VS2 and the Gibbs free energy of 0.218 eV for Ta@VS2. Furthermore, the adsorption and catalytic mechanisms of the VS2-based SACs in the reactions were elucidated, presenting a universal case demonstrating the use of unconventional graphene-based SACs in Li-S batteries. This study presents a universal surface regulation strategy for transition metal dichalcogenides to enhance their performance as host materials in Li-S batteries.

Facilitation of Fenton-Like Reaction of Copper-Nitrogen-Doped Carbon-Based Nanocatalysts by Enhancing Hydroxyl Adsorption on Single-Atom Cu-NxC4- x Sites

Copper-nitrogen-doped carbon-based nanocatalysts (Cu-NCs), containing atomically dispersed Cu-NxC4- x sites, are efficient in boosting the Fenton-like reaction. However, the mechanisms of the Fenton-like reaction, including the pH effect on the products and the effect of the coordination environment on catalytic activity, remain controversial, restricting the development of Cu-NCs. Cu-NCs are experimentally synthesized with Cu-N4 sites and prove that the Fenton-like reaction generates mainly hydroxyl radicals (·OH) in the acidic but ·OH and superoxide radicals (·O2 -) in the neutral. The density functional theory (DFT) calculations reveal that the catalytic activity of Cu-NCs in the Fenton-like reaction is associated with the adsorption strength of ·OH at the Cu site. Further investigation of the effect of the coordination environment of Cu-NCs indicates that the Cu-N2C2 site, which can enhance the ·OH adsorption strength, is an ideal catalyst site for the Fenton-like reaction. These results open the way to facilitating the catalytic activity of Cu-NCs in the Fenton-like reaction.

Structured Catalysts and Catalytic Processes: Transport and Reaction Perspectives

The structure of catalysts determines the performance of catalytic processes. Intrinsically, the electronic and geometric structures influence the interaction between active species and the surface of the catalyst, which subsequently regulates the adsorption, reaction, and desorption behaviors. In recent decades, the development of catalysts with complex structures, including bulk, interfacial, encapsulated, and atomically dispersed structures, can potentially affect the electronic and geometric structures of catalysts and lead to further control of the transport and reaction of molecules. This review describes comprehensive understandings on the influence of electronic and geometric properties and complex catalyst structures on the performance of relevant heterogeneous catalytic processes, especially for the transport and reaction over structured catalysts for the conversions of light alkanes and small molecules. The recent research progress of the electronic and geometric properties over the active sites, specifically for theoretical descriptors developed in the recent decades, is discussed at the atomic level. The designs and properties of catalysts with specific structures are summarized. The transport phenomena and reactions over structured catalysts for the conversions of light alkanes and small molecules are analyzed. At the end of this review, we present our perspectives on the challenges for the further development of structured catalysts and heterogeneous catalytic processes.

Preparation and Application of Single-Atom Cobalt Catalysts in Organic Synthesis and Environmental Remediation

The development of high-performance catalysts plays a crucial role in facilitating chemical production and reducing environmental contamination. Single-atom catalysts (SACs), a class of catalysts that bridge the gap between homogeneous and heterogeneous catalysis, have garnered increasing attention because of their unique activity, selectivity, and stability in many pivotal reactions. Meanwhile, the scarcity of precious metal SACs calls for the arrival of cost-effective SACs. Cobalt, as a common non-noble metal, possesses tremendous potential in the field of single-atom catalysis. Despite their potential, reviews about single-atom Co catalysts (Co-SACs) are lacking. Accordingly, this review thoroughly summarized various preparation methodologies of Co-SACs, particularly pyrolysis; its application in the specific domain of organic synthesis and environmental remediation is discussed as well. The structure-activity relationship and potential catalytic mechanism of Co-SACs are elucidated through some representative reactions. The imminent challenges and development prospects of Co-SACs are discussed in detail. The findings and insights provided herein can guide further exploration and development in this charming area of catalyst design, leading to the realization of efficient and sustainable catalytic processes.

One-Step Pyrolysis Construction of Bimetallic Atom-Cluster Sites for Boosting Bifunctional Catalytic Activity in Zn-Air Batteries

Due to their unique advantages, single atoms and clusters of transition metals are expected to achieve a breakthrough in catalytic activity, but large-scale production of active materials remains a challenge. In this work, a simple solvent-free one-step annealing method is developed and applied to construct diatomic and cluster active sites in activated carbon by utilizing the strong anchoring ability of phenanthroline to metal ions, which can be scaled for mass productions. Benefiting from the synergy between the different metals, the obtained sub-nano-bimetallic atom-cluster catalysts (FeNiAC -NC) exhibit high oxygen reduction reactions (ORR) activity (E1/2 = 0.936 V vs. RHE) and a small ORR/oxygen evolution reaction (OER) potential gap of only 0.594 V. An in-house pouch Zn-air battery is assembled using an FeNiAC -NC catalyst, which demonstrates a stability of 1000 h, outperforming previous reports. The existence of clusters and their effects on catalytic activity is analyzed by density functional theory calculations to reveal the chemistry of nano-bimetallic atom-cluster catalysts.

Porous carbonaceous materials simultaneously dispersing N, Fe and Co as bifunctional catalysts for the ORR and OER: electrochemical performance in a prototype of a Zn-air battery

Infiltration of the mesoporous structure of SBA-15 silica as a hard template with phenanthroline complexes of Fe3+ and Co2+ allowed the simultaneous dispersion of nitrogen, iron and cobalt species on the surface of the obtained carbonaceous CMK-3 silica replica, with potential as bifunctional heterogeneous catalysts for the cathodic oxygen reduction and evolution reactions (ORR and OER). The textural properties and mesopore structure depended on the composition of the material. The carbonaceous FeCoNCMK-3 (1/1), obtained with an Fe/Co molar ratio of 1/1, exhibited an ordered cylindrical mesoporous structure with a high mesopore volume, a rather homogeneous composition in terms of total and surface concentrations of iron and cobalt, and a balanced presence of pyridinic-, pyrrolic- and graphitic-N species. FeCoNCMK-3 (1/1) could improve the ORR kinetics by adsorption and reduction of O2 through the 4-electron mechanism with a current density of -17.37 mA cm-2, Eonset of 1.13 V vs. RHE and E1/2 of 0.75 V when compared to metal-free, monometallic or bimetallic electrocatalysts with a higher amount of cobalt than that of iron. In addition, FeCoNCMK-3 (1/1) exhibited activity for the OER, presenting lower values of Eonset (1.52 V), Ej10 (1.78 V) and the Tafel slope (76.3 mV dec-1) with respect to other catalysts. When evaluated as a cathode in a prototype of a Zn-air battery, FeCoNCMK-3 (1/1) exhibited a high open circuit voltage of 1.41 V, a peak power density of 66.84 mW cm-2, a large specific capacity of 818.88 mA h gZn-1, and cycling for 20 h but with deactivation upon cycling.

Highly Ordered Monolayers of μm-Sized Polystyrene Spheres Studied by Grazing-Incidence Small-Angle X-ray Scattering, Simulations, and Geometrical Calculations

Unraveling the two-dimensional (2D) structural ordering of colloidal particles assembled at a flat surface is essential for understanding and optimizing their physical properties. So far, grazing-incidence small-angle X-ray scattering (GISAXS) has been widely used to determine crystallographic information on 2D self-assembled structures of nanosize objects. However, solving the structure of 2D lattices consisting of micrometer (μm)-sized objects still remains a challenge using scattering methods. Here, a model 2D SCALMS (supported catalytically active liquid metal solution) template is fabricated from μm-sized polystyrene (PS) spheres that form a monolayer on top of the flat solid support. GISAXS patterns of the sample were collected for rotation angles around its surface normal in steps of 3°. For every rotation angle, different Bragg-type interference maxima along the out-of-plane (qz) direction were observed. On the basis of simulations of GISXAS patterns of single domains of ordered particle arrangements using the distorted wave Born approximation (DWBA) and validation against a simple geometrical scattering model, the interference maxima could nicely be interpreted to originate from a monolayer of the μm-sized spherical particles which are arranged in domains of hexagonal 2D paracrystalline order. This novel GISAXS evaluation technique serves as a proof of principle for determining the μm-size periodicity of 2D crystalline domains and demonstrates its potential to spatially resolve the relative orientations of such domains with respect to a reference direction.

Modeling Interfacial Dynamics on Single Atom Electrocatalysts: Explicit Solvation and Potential Dependence

ConspectusSingle atom electrocatalysts, with noble metal-free composition, maximal atom efficiency, and exceptional reactivity toward various energy and environmental applications, have become a research hot spot in the recent decade. Their simplicity and the isolated nature of the atomic structure of their active site have also made them an ideal model catalyst system for studying reaction mechanisms and activity trends. However, the state of the single atom active sites during electrochemical reactions may not be as simple as is usually assumed. To the contrary, the single atom electrocatalysts have been reported to be under greater influence from interfacial dynamics, with solvent and electrolyte ions perpetually interacting with the electrified active center under an applied electrode potential. These complexities render the activity trends and reaction mechanisms derived from simplistic models dubious.In this Account, with a few popular single atom electrocatalysis systems, we show how the change in electrochemical potential induces nontrivial variation in the free energy profile of elemental electrochemical reaction steps, demonstrate how the active centers with different electronic structure features can induce different solvation structures at the interface even for the same reaction intermediate of the simplest electrochemical reaction, and discuss the implication of the complexities on the kinetics and thermodynamics of the reaction system to better address the activity and selectivity trends. We also venture into more intriguing interfacial phenomena, such as alternative reaction pathways and intermediates that are favored and stabilized by solvation and polarization effects, long-range interfacial dynamics across the region far beyond the contact layer, and the dynamic activation or deactivation of single atom sites under operation conditions. We show the necessity of including realistic aspects (explicit solvent, electrolyte, and electrode potential) into the model to correctly capture the physics and chemistry at the electrochemical interface and to understand the reaction mechanisms and reactivity trends. We also demonstrate how the popular simplistic design principles fail and how they can be revised by including the kinetics and interfacial factors in the model. All of these rich dynamics and chemistry would remain hidden or overlooked otherwise. We believe that the complexity at an electrochemical interface is not a curse but a blessing in that it enables deeper understanding and finer control of the potential-dependent free energy landscape of electrochemical reactions, which opens up new dimensions for further design and optimization of single atom electrocatalysts and beyond. Limitations of current methods and challenges faced by the theoretical and experimental communities are discussed, along with the possible solutions awaiting development in the future.

Ethylene Methoxycarbonylation over Heterogeneous Pt1/MoS2 Single-Atom Catalyst: Metal-Support Concerted Catalysis

Ethylene methoxycarbonylation (EMC) to methyl propanoate (MP) is an industrially important reaction and commercially uses a homogeneous Pd-phosphine organometallic complex as the catalyst and corrosive strong acid as the promoter. In this work, we develop a Pt1/MoS2 heterogeneous single-atom catalyst (SAC) which exhibits high activity, selectivity, and good recyclability for EMC reaction without need of any liquid acid. The production rate of MP achieves 0.35 gMP gcat-1 h-1 with MP selectivity of 91.1% at 1 MPa CO, 1 MPa C2H4, and 160 °C, which can be doubled at 2 MPa CO and corresponds to 320.1 molMP molPt-1 h-1, at least 1 order of magnitude higher than the earlier reported heterogeneous catalyst and even comparable to some of homogeneous catalyst. Advanced characterizations and DFT calculations reveal that all the Pt single atoms are located at the Mo vacancies along the Mo edge of the MoS2 nanosheets, forming pocket-like Mo-S-Pt1-S-Mo ensembles with uniform and well-defined structure. Methanol is first adsorbed and dissociated on Mo sites, and the produced H spillovers to the adjacent Pt site forming Pt-H species which then activate ethylene, forming Pt-ethyl species. Meanwhile, CO adsorbed on the other Mo site reacts with the Pt-ethyl species, yielding propionyl species, and this carbonylation is the rate-determining step. The final methoxylation step proceeds via the nucleophilic attack of propionyl species by -OCH3 affording the final product MP. Such a metal-support concerted catalysis enabled by the Mo-S-Pt1-S-Mo multisite ensemble opens a new avenue for SACs to promote the multimolecular reactions that prevail in homogeneous catalysis.

A replacement strategy for regulating local environment of single-atom Co-SxN4-x catalysts to facilitate CO2 electroreduction

The performances of single-atom catalysts are governed by their local coordination environments. Here, a thermal replacement strategy is developed for the synthesis of single-atom catalysts with precisely controlled and adjustable local coordination environments. A series of Co-SxN4-x (x = 0, 1, 2, 3) single-atom catalysts are successfully synthesized by thermally replacing coordinated N with S at elevated temperature, and a volcano relationship between coordinations and catalytic performances toward electrochemical CO2 reduction is observed. The Co-S1N3 catalyst has the balanced COOH*and CO* bindings, and thus locates at the apex of the volcano with the highest performance toward electrochemical CO2 reduction to CO, with the maximum CO Faradaic efficiency of 98 ± 1.8% and high turnover frequency of 4564 h-1 at an overpotential of 410 mV tested in H-cell with CO2-saturated 0.5 M KHCO3, surpassing most of the reported single-atom catalysts. This work provides a rational approach to control the local coordination environment of the single-atom catalysts, which is important for further fine-tuning the catalytic performance.

Emerging Xene-Based Single-Atom Catalysts: Theory, Synthesis, and Catalytic Applications

In recent years, the emergence of novel 2D monoelemental materials (Xenes), e.g., graphdiyne, borophene, phosphorene, antimonene, bismuthene, and stanene, has exhibited unprecedented potentials for their versatile applications as well as addressing new discoveries in fundamental science. Owing to their unique physicochemical, optical, and electronic properties, emerging Xenes have been regarded as promising candidates in the community of single-atom catalysts (SACs) as single-atom active sites or support matrixes for significant improvement in intrinsic activity and selectivity. In order to comprehensively understand the relationships between the structure and property of Xene-based SACs, this review represents a comprehensive summary from theoretical predictions to experimental investigations. Firstly, theoretical calculations regarding both the anchoring of Xene-based single-atom active sites on versatile support matrixes and doping/substituting heteroatoms at Xene-based support matrixes are briefly summarized. Secondly, controlled synthesis and precise characterization are presented for Xene-based SACs. Finally, current challenges and future opportunities for the development of Xene-based SACs are highlighted.

Contemporary advances in photocatalytic CO2 reduction using single-atom catalysts supported on carbon-based materials

The persistent issue of CO2 emissions and their subsequent impact on the Earth's atmosphere can be effectively addressed through the utilization of efficient photocatalysts. Employing a sustainable carbon cycle via photocatalysis presents a promising technology for simultaneously managing the greenhouse effect and the energy dilemma. However, the efficiency of energy conversion encounters limitations due to inadequate carrier utilization and a deficiency of reactive sites. Single-atom catalysts (SACs) have demonstrated exceptional performance in efficiently addressing the aforementioned challenges. This review article commences with an overview of SAC types, structures, fundamentals, synthesis strategies, and characterizations, providing a logical foundation for the design and properties of SACs based on the correlation between their structure and efficiency. Additionally, we delve into the general mechanism and the role of SACs in photocatalytic CO2 reduction. Furthermore, we furnish a comprehensive survey of the latest advancements in SACs concerning their capacity to enhance efficiency, long-term stability, and selectivity in CO2 reduction. Carbon-structured support materials such as covalent organic frameworks (COFs), graphitic carbon nitride (g-C3N4), metal-organic frameworks (MOFs), covalent triazine frameworks (CTFs), and graphene-based photocatalysts have garnered significant attention due to their substantial surface area, superior conductivity, and chemical stability. These carbon-based materials are frequently chosen as support matrices for anchoring single metal atoms, thereby enhancing catalytic activity and selectivity. The motivation behind this review article lies in evaluating recent developments in photocatalytic CO2 reduction employing SACs supported on carbon substrates. In conclusion, we highlight critical issues associated with SACs, potential prospects in photocatalytic CO2 reduction, and existing challenges. This review article is dedicated to providing a comprehensive and organized compilation of recent research findings on carbon support materials for SACs in photocatalytic CO2 reduction, with a specific focus on materials that are environmentally friendly, readily accessible, cost-effective, and exceptionally efficient. This work offers a critical assessment and serves as a systematic reference for the development of SACs supported on MOFs, COFs, g-C3N4, graphene, and CTFs support materials to enhance photocatalytic CO2 conversion.

The Advances, Challenges, and Perspectives on Electrocatalytic Reduction of Nitrogenous Substances to Ammonia: A Review

Ammonia (NH3) is considered to be a critical chemical feedstock in agriculture, industry, and other fields. However, conventional Haber-Bosch (HB) ammonia (NH3) production suffers from high energy consumption, harsh reaction conditions, and large carbon dioxide emissions. Despite the emergence of electrocatalytic reduction of nitrogenous substances to NH3 under ambient conditions as a new frontier, there are several bottleneck problems that impede the commercialization process. These include low catalytic efficiency, competition with the hydrogen evolution reaction, and difficulties in breaking the N≡N triple bond. In this review, we explore the recent advances in electrocatalytic NH3 synthesis, using nitrogen and nitrate as reactants. We focus on the contribution of the catalyst design, specifically based on molecular-catalyst interaction mechanisms, as well as chemical bond breaking and directional coupling mechanisms, to address the aforementioned problems during electrocatalytic NH3 synthesis. Finally, we discuss the relevant opportunities and challenges in this field.

Facile Hydrogenolysis of Sugars to 1,2-Glycols by Ru@PPh3/OPPh3 Confined Large-Pore Mesoporous Silica

Tandem hydrogenation vis-à-vis hydrogenolysis of xylose to 1,2-glycols remains a major challenge. Although one-pot conversion of xylose to 1,2-glycols requires stringent conditions, a sustainable approach would be quite noteworthy. We have developed a microwave route for the one-pot conversion of pentose (C5) and hexose (C6) sugars into glycol and hexitol, without pressurized hydrogen reactors. A pronounced hydrogenolysis of sugars to glycols is observed by Ru single atom (SA) on triphenylphosphine/phosphine oxide-modified silica (Ru@SiP), in contrast to Ru SA on pristine (Ru@SiC) and 3-aminopropyl-modified silica (Ru@SiN). A promising "ligand effect" was observed through phosphine modification of silica that presents a 70% overall yield of all reduced sugars (xylitol + glycols) from a 99% conversion of xylose with Ru@SiP. A theoretical study by DFT depicts an electronic effect on Ru-SA by triphenylphosphine that promotes the catalytic hydrogenolysis of sugars under mild conditions. Hence, this research represents an important step for glycols from biomass-derived sources.

Active sites of atomically dispersed Pt supported on Gd-doped ceria with improved low temperature performance for CO oxidation

"Single - atom" catalysts (SACs) have been the focus of intense research, due to debates about their reactivity and challenges toward determining and designing "single - atom" (SA) sites. To address the challenge, in this work, we designed Pt SACs supported on Gd-doped ceria (Pt/CGO), which showed improved activity for CO oxidation compared to its counterpart, Pt/ceria. The enhanced activity of Pt/CGO was associated with a new Pt SA site which appeared only in the Pt/CGO catalyst under CO pretreatment at elevated temperatures. Combined X-ray and optical spectroscopies revealed that, at this site, Pt was found to be d-electron rich and bridged with Gd-induced defects via an oxygen vacancy. As explained by density functional theory calculations, this site opened a new path via a dicarbonyl intermediate for CO oxidation with a greatly reduced energy barrier. These results provide guidance for rationally improving the catalytic properties of SA sites for oxidation reactions.

A single transition metal atom anchored on Nb2C as an electrocatalyst for the nitrogen reduction reaction

Nitrogen (N2) reduction to produce ammonia (NH3) under milder conditions is attractive as NH3 has been widely used in various fields. The electrocatalytic nitrogen reduction reaction (NRR) is considered to be a more moderate and green method for ammonia synthesis. Herein, using density functional theory (DFT) computations, we investigated the potential application of single-atom catalysts (SACs) toward the NRR, in which transition metal (TM, TM = Ti, V, Mn, Fe, Co, Y, Zr, Mo) atoms are supported on Nb2C (TM-Nb2C). Through our screening, Fe-Nb2C is highlighted from 8 candidate systems as the superior SAC for the NRR with a low limiting potential of -0.47 V. Meanwhile, a volcano plot between UL (NRR) and the ICOHP values of the N-H bond in *NH2 is established to determine the optimal ICOHP values that can be used as a simple descriptor of the NRR performance of Fe-Nb2C.

Photocatalytic Free Radical-Controlled Synthesis of High-Performance Single-Atom Catalysts

Single-atom catalysts (SACs) have emerged as crucial players in catalysis research, prompting extensive investigation and application. The precise control of metal atom nucleation and growth has garnered significant attention. In this study, we present a straightforward approach for preparing SACs utilizing a photocatalytic radical control strategy. Notably, we demonstrate for the first time that radicals generated during the photochemical process effectively hinder the aggregation of individual atoms. By leveraging the cooperative anchoring of nitrogen atoms and crystal lattice oxygen on the support, we successfully stabilize the single atom. Our Pd1 /TiO2 catalysts exhibit remarkable catalytic activity and stability in the Suzuki-Miyaura cross-coupling reaction, which was 43 times higher than Pd/C. Furthermore, we successfully depose Pd atoms onto various substrates, including TiO2 , CeO2 , and WO3 . The photocatalytic radical control strategy can be extended to other single-atom catalysts, such as Ir, Pt, Rh, and Ru, underscoring its broad applicability.

Mechanism and dynamics of Baeyer-Villiger oxidation of furfural to maleic anhydride in presence of H2O2 and Au clusters

CONTEXT

The increasing demand for fuels and chemicals in the world has prompted the exploration of various forms of renewable energy resources. Using C5-based furfural as the platform to replace the fossil energy resources is greatly attractive because of its abundance and environmental friendliness. Here we study the activity, selectivity, and possible reaction pathways for the Baeyer-Villiger oxidation of furfural over small Au clusters using hydrogen peroxide as oxidant. Furfural reacts with hydrogen peroxide in the presence of the catalysts with 93% selectivity towards maleic anhydride. Natural population analysis, frontier molecular orbital analysis, and spectroscopic analysis are used to illustrate the interaction mechanism between C5H4O2, H2O2, and Au. Reaction pathways leading to the formation of maleic anhydride are also explored. The reaction of C5H4O2 with H2O2 in the absence of a catalyst bears a relatively high transition state energy barrier of 2.98 eV for the first step involving absorption of H atom of H2O2 on the -OH group of C5H4O2. This is in agreement with the blank experiment where there were rare oxidation products observed in the absence of the metal cluster catalysts. On the other hand, transition state energies in the presence of the Au metal clusters are lower and the most feasible pathway is where the substrate and H2O2 co-bind on the Au catalyst and H2O2 molecule transfers an oxygen to the substrate, leading to the cleavage of the O-O bond.

METHODS

DFT calculations were done with B3PW91 functional. 6-311G(df, p) basis set was used for C, O, and H and aug-cc-pVDZ-PP was used for gold atoms. Gaussian 09 software was used for the calculations. Multiwfn 3.7 dev was used for the quantum theory of atoms-in-molecules (QTAIM) investigations.

Realistic Modeling of the Electrocatalytic Process at Complex Solid-Liquid Interface

The rational design of electrocatalysis has emerged as one of the most thriving means for mitigating energy and environmental crises. The key to this effort is the understanding of the complex electrochemical interface, wherein the electrode potential as well as various internal factors such as H-bond network, adsorbate coverage, and dynamic behavior of the interface collectively contribute to the electrocatalytic activity and selectivity. In this context, the authors have reviewed recent theoretical advances, and especially, the contributions to modeling the realistic electrocatalytic processes at complex electrochemical interfaces,  and illustrated the challenges and fundamental problems in this field. Specifically, the significance of the inclusion of explicit solvation and electrode potential as well as the strategies toward the design of highly efficient electrocatalysts are discussed. The structure-activity relationships and their dynamic responses to the environment and catalytic functionality under working conditions are illustrated to be crucial factors for understanding the complexed interface and the electrocatalytic activities. It is hoped that this review can help spark new research passion and ultimately bring a step closer to a realistic and systematic modeling method for electrocatalysis.

Confined synthesis of ternary FeCoMn single-atom nanozyme in N-doped hollow mesoporous carbon nanospheres for synergistic chemotherapy and chemodynamic cancer therapy

Recently, nanozymes show increasing biological applications and promising possibilities for therapeutic intervention, while their mediated therapeutic outcomes are severely compromised due to their insufficient catalytic activity and specificity. Herein, ternary FeCoMn single atoms were incorporated into N-doped hollow mesoporous carbon nanospheres by in situ confinement pyrolysis at 800 °C as high-efficiency nanozyme. The confinement strategy endows the as-prepared nanozyme with the enhanced catalase- and oxidase-like activities. Specifically, the FeCoMn TSAs/N-HCSs nanozyme can decompose intracellular H2O2 to generate O2 and subsequently convert O2 to cytotoxic superoxide radicals (O2∙-), which can initiate cascade enzymatic reactions in tumor microenvironment (TME) for chemodynamic therapy (CDT). Moreover, the cancer therapy was largely enhanced by loading with doxorubicin (DOX). Impressively, the FeCoMn TSAs/N-HCSs nanozyme-mediated CDT and the DOX-induced chemotherapy endow the DOX@FeCoMn TSAs/N-HCSs with effective tumor inhibition, showing the superior therapeutic efficacy.

Generation and identification of 1O2 in catalysts/peroxymonosulfate systems for water purification

Catalysts for peroxymonosulfate (PMS) activation are appealing in the purification of organic wastewater. Singlet oxygen (1O2) is widely recognized as a crucial reactive species for degrading organic contaminants in catalysts/PMS systems due to its adamant resistance to inorganic anions, high selectivity, and broad pH applicability. With the rapid growth of studies on 1O2 in catalysts/PMS systems, it becomes necessary to provide a comprehensive review of its current state. This review highlights recent advancements concerning 1O2 in catalysts/PMS systems, with a primary focus on generation pathways and identification methods. The generation pathways of 1O2 are summarized based on whether (distinguished by the geometric structures of metal species) or not (distinguished by the active sites) the metal element is included in the catalysts. Furthermore, this review thoroughly discusses the influence of metal valence states and metal species with different geometric structures on 1O2 generation. Various potential strategies are explored to regulate the generation of 1O2 from the perspective of catalyst design. Identification methods of 1O2 primarily include electron paramagnetic resonance (EPR), quenching experiments, reaction in D2O solution, and chemical probe tests in catalysts/PMS systems. The principles and applications of these methods are presented comprehensively along with their applicability, possible disagreements, and corresponding solutions. Besides, an identifying procedure on the combination of main identification methods is provided to evaluate the role of 1O2 in catalysts/PMS systems. Lastly, several perspectives for further studies are proposed to facilitate developments of 1O2 in catalysts/PMS systems.

Activated platinum in gallium-based room-temperature liquid metals for enhanced reduction reactions

Room-temperature gallium-based liquid metals (LMs) have recently attracted significant attention worldwide for application in catalysis because of their unique combination of fluidic and catalytic properties. Platinum loading in LMs is expected to enhance the catalytic performance of various reaction systems. However, Pt-loaded methods for Ga-based LMs have not yet been sufficiently developed to improve the catalytic performance and Pt utilization efficiency. In this study, a novel method for the fabrication of Pt-incorporated LMs using Pt sputter deposition (Pt(dep)-LMs) was developed. The Pt(dep)-LMs contained well-dispersed Pt flakes with diameters of 0.89 ± 0.6 μm. The catalytic activity of the Pt(dep)-LM with a Pt loading of ∼0.7 wt% was investigated using model reactions such as methylene blue (MB) reduction and hydrogen production in an acidic aqueous solution. The Pt(dep)-LMs showed a higher MB reduction rate (three times) and hydrogen production (three times) than the LM loaded with conventional Pt black (∼0.7 wt%). In contrast to the Pt(dep)-LMs, solid-based Ga with a Pt loading of ∼0.7 wt% did not catalyze the reactions. These results demonstrate that Pt activation occurred in the Pt(dep)-LMs fabricated by Pt sputtering, and that the fluidic properties of the LMs enhanced the catalytic reduction reactions. Thus, these findings highlight the superior performance of the Pt deposition method and the advantages of using Pt-LM-based catalysts.

Single-atom site catalysis in Li-S batteries

With their high theoretical energy density, Li-S batteries are regarded as the ideal battery system for next generation electrochemical energy storage. In the last 15 years, Li-S batteries have made outstanding academic progress. Recently, research studies have placed more emphasis on their practical application aspects, which puts forward strict requirements for the loading of S cathodes and the amount of electrolytes. To meet the above requirements, electrode catalysis design is of crucial significance. Among all the catalysts, single-atom site catalysts (SASCs) are considered to be ideal catalyst materials for the commercialization of Li-S batteries due to their high activity and highest utilization of catalytic sites. This perspective introduces the kinetic mechanism of S cathodes, the basic concept and synthesis strategy of SASCs, and then systematically summarizes the research progress of SASCs for S cathodes and, the related functional interlayers/separators in recent years. Finally, the opportunities and challenges of SASCs in Li-S batteries are summarized and prospected.

Facet-engineered TiO2 drives photocatalytic activity and stability of supported noble metal clusters during H2 evolution

Metal clusters supported on TiO2 are widely used in many photocatalytic applications, including pollution control and production of solar fuels. Besides high photoactivity, stability during the photoreaction is another essential quality of high-performance photocatalysts, however systematic studies on this attribute are absent for metal clusters supported on TiO2. Here we have studied, both experimentally and with first-principles simulation methods, the stability of Pt, Pd and Au clusters prepared by ball milling on nanoshaped anatase nanoparticles preferentially exposing {001} (plates) and {101} (bipyramids) facets during the photogeneration of hydrogen. It is found that Pt/TiO2 exhibits superior stability than Pd/TiO2 and Au/TiO2, and that {001} facet-based photocatalysts always are more stable than their {101} analogous regardless of the considered metal species. The loss of stability associated with cluster sintering, which is facilitated by the transfer of photoexcited carriers from the metal species to the neighbouring Ti and O atoms, most significantly and detrimentally affects the H2-evolution photoactivity.

Drug-Primed Self-Assembly of Platinum-Single-Atom Nanozyme to Regulate Cellular Redox Homeostasis Against Cancer

Single-atom nanozymes (SAzymes) with high catalytic activity exhibit the potential to disequilibrate the reactive oxygen metabolic balance in the tumor microenvironment (TME), which contains several endogenous reductive substances such as glutathione (GSH). Herein, a novel nano-assembly (CDs@Pt SAs/NCs@DOX) is first constructed using drug-primed platinum (Pt) single-atom or nanocluster nanozymes with a Pt loading of 34.8%, which exhibits prominent dual enzymatic activities to mimic peroxidase (POD) and glutathione oxidase (GSHOx). The unique GSHOx-like activity can efficiently scavenge GSH with a relatively low Km (1.04 mm) and high Vmax (7.46 × 10-6  m s-1 ), thus avoiding single oxygen (1 O2 ) depletion. CDs@Pt SAs/NCs@DOX simultaneously demonstrates low-temperature photothermal therapy and TME- or laser-controlled disassembly and drug release, which can effectively regulate cellular redox homeostasis and achieve high tumor growth inhibition. These outcomes may provide promising strategies for the preparation of Pt SAzymes with multiple activities and variable-sized nano-assemblies, allowing for broader applications of SAzymes and nano-assemblies in the biomedical field.

Tip-activated single-atom catalysis: CO oxidation on Au adatom on oxidized rutile TiO2 surface

Single-atom catalysis of carbon monoxide oxidation on metal-oxide surfaces is crucial for greenhouse recycling, automotive catalysis, and beyond, but reports of the atomic-scale mechanism are still scarce. Here, using scanning probe microscopy, we show that charging single gold atoms on oxidized rutile titanium dioxide surface, both positively and negatively, considerably promotes adsorption of carbon monoxide. No carbon monoxide adsorption is observed on neutral gold atoms. Two different carbon monoxide adsorption geometries on gold atoms are identified. We demonstrate full control over the redox state of adsorbed gold single atoms, carbon monoxide adsorption geometry, and carbon monoxide adsorption/desorption by the atomic force microscopy tip. On charged gold atoms, we activate Eley-Rideal oxidation reaction between carbon monoxide and a neighboring oxygen adatom by the tip. Our results provide unprecedented insights into carbon monoxide adsorption and suggest that the gold dual activity for carbon monoxide oxidation after electron or hole attachment is also the key ingredient in photocatalysis under realistic conditions.

Bioinspired CuZn-N/C Single-Atom Nanozyme with High Substrate Specificity for Selective Online Monitoring of Epinephrine in Living Brain

Though many elegant laccase mimics have emerged, these mimics generally have no substrate selectivity as well as low activity, making it difficult to fulfill the demand for monitoring in physiological conditions. Herein, inspired by the Cu-N ligand structure in the active site of natural laccase, we revealed that a carbon nanomaterial with atomically dispersed Cu and Zn atoms (CuZn-N/C) and a well-defined ligand structure could function as an effective laccase mimic for selectively catalyzing epinephrine (EP) oxidation. Catalytic activity of the CuZn-N/C nanozyme was superior to those of Cu-N/C and Zn-N/C and featured a Km value nearly 3-fold lower than that of natural laccase, which indicated that CuZn-N/C has a better affinity for EP. Density functional theory (DFT) revealed the mechanism of the superior catalytic ability of dual-metal CuZn-N/C as follows: (1) the exact distance of the two metal atoms in the CuZn-N/C catalyst makes it suitable for adsorption of the EP molecule, and the CuZn-N/C catalyst can offer the second hydrogen bond that stabilizes the adsorption; (2) molecular orbitals and density of states indicate that the strong interaction between the EP molecule and CuZn-N/C is important for EP catalytic oxidization. Furthermore, a sensitive and selective online optical detection platform (OODP) is constructed for determining EP with a low limit of detection (LOD) of 0.235 μM and a linear range of 0.2-20 μM. The system allows real-time measurement of EP release in the rat brain in vivo following ischemia with dexmedetomidine administration. This work not only provides an idea of designing efficient laccase mimics but also builds a promising chemical platform for better understanding EP-related drug action for ischemic cerebrovascular illnesses and opens up possibilities to explore brain function.

Stabilizing Pt Single Atoms through Pt-Se Electron Bridges on Vacancy-enriched Nickel Selenide for Efficient Electrocatalytic Hydrogen Evolution

Rational design of Pt single-atom catalysts provides a promising strategy to significantly improve the electrocatalytic activity for hydrogen evolution reaction. In this work, we presented a novel and efficient strategy for utilizing the low electron-density region of substrate to effectively trap and confine high electron-density metal atoms. The Pt single-atom catalyst supported by nickel selenide with rich vacancies was prepared via a hydrothermal-impregnation stepwise approach. Through experimental testation and DFT theoretical calculation, we confirm that Pt single atoms are well distributed at cationic vacancies of nickel selenide with loading amount of 3.2 wt. %. Moreover, the atomic Pt combined with the high electronegative Se to form Pt-Se bond as a "bridge" between single atoms and substrate for fast electron translation. This novel catalyst shows an extremely low overpotential of 45 mV at 10 mA cm-2 and an excellent stability over 120 h. Furthermore, the nickel selenide supported Pt SACs exhibits long-term stability for practical application, which maintains a high current density of 390 mA cm-2 over 80 h with a retention of 99 %. This work points a promising direction for designing single atoms catalysts with high catalytic activity and stability for advanced green energy conversion technologies.

Atomic Insights into Synergistic Nitroarene Hydrogenation over Nanodiamond-Supported Pt1 -Fe1 Dual-Single-Atom Catalyst

Fundamental understanding of the synergistic effect of bimetallic catalysts is of extreme significance in heterogeneous catalysis, but a great challenge lies in the precise construction of uniform dual-metal sites. Here, we develop a novel method for constructing Pt1 -Fe1 /ND dual-single-atom catalyst, by anchoring Pt single atoms on Fe1 -N4 sites decorating a nanodiamond (ND) surface. Using this catalyst, the synergy of nitroarenes selective hydrogenation is revealed. In detail, hydrogen is activated on the Pt1 -Fe1 dual site and the nitro group is strongly adsorbed on the Fe1 site via a vertical configuration for subsequent hydrogenation. Such synergistic effect decreases the activation energy and results in an unprecedented catalytic performance (3.1 s-1 turnover frequency, ca. 100 % selectivity, 24 types of substrates). Our findings advance the applications of dual-single-atom catalysts in selective hydrogenations and open up a new way to explore the nature of synergistic catalysis at the atomic level.

Dual-Site Metal Catalysts for Electrocatalytic CO2 Reduction Reaction

Electrocatalytic CO2 reduction reaction (CO2 RR) is a promising and green approach for reducing atmospheric CO2 concentration and achieving high-valued conversion of CO2 under the carbon-neutral policy. In CO2 RR, the dual-site metal catalysts (DSMCs) have received wide attention for their ingenious design strategies, abundant active sites, and excellent catalytic performance attributed to the synergistic effect between dual-site in terms of activity, selectivity and stability, which plays a key role in catalytic reactions. This review provides a systematic summary and detailed classification of DSMCs for CO2 RR, describes the mechanism of synergistic effects in catalytic reactions, and also introduces in situ characterization techniques commonly used in CO2 RR. Finally, the main challenges and prospects of dual-site metal catalysts and even multi-site catalysts for CO2 recycling are analyzed. It is believed that based on the understanding of bimetallic site catalysts and synergistic effects in CO2 RR, well-designed high-performance, low-cost electrocatalysts are promising for achieving CO2 conversion, electrochemical energy conversion and storage in the future.

Tuning the Coordination Environment of Carbon-Based Single-Atom Catalysts via Doping with Multiple Heteroatoms and Their Applications in Electrocatalysis

Carbon-based single-atom catalysts (SACs) are considered to be a perfect platform for studying the structure-activity relationship of different reactions due to the adjustability of their coordination environment. Multi-heteroatom doping has been demonstrated as an effective strategy for tuning the coordination environment of carbon-based SACs and enhancing catalytic performance in electrochemical reactions. Herein, recently developed strategies for multi-heteroatom doping, focusing on the regulation of single-atom active sites by heteroatoms in different coordination shells, are summarized. In addition, the correlation between the coordination environment and the catalytic activity of carbon-based SACs are investigated through representative experiments and theoretical calculations for various electrochemical reactions. Finally, concerning certain shortcomings of the current strategies of doping multi-heteroatoms, some suggestions are put forward to promote the development of carbon-based SACs in the field of electrocatalysis.

Nb2S2C Monolayers with Transition Metal Atoms Embedded at the S Vacancy Are Promising Single-Atom Catalysts for CO Oxidation

Single atoms anchored on stable and robust two-dimensional (2D) materials are attractive catalysts for carbon monoxide (CO) oxidation. Here, 3d (Fe-Zn), 4d (Ru-Cd), and 5d (Os-Hg) transition metal-decorated Nb2S2C monolayers were systematically studied as potential single-atom catalysts for low-temperature CO oxidation reactions by performing first-principles calculations. Sulfur vacancies are essential for stabilizing the transition metals anchored on the surface of defective Nb2S2C. After estimating the structure stability, the aggregation trend of the embedded metal atoms, and adsorption strength of reactants and products, Zn-decorated defective Nb2S2C is predicted to be a promising catalyst to facilitate CO oxidation through the Langmuir-Hinshelwood (LH) mechanism with an energy barrier of only 0.25 eV. Our investigation indicates that defective carbosulfides can be promising substrates to generate efficient and low-cost single-atom catalysts for low-temperature CO oxidation.

In Silico Guided Design of Metal/Semiconductor Photocatalysts: A Case of Cu-Modified TiO2 for Ciprofloxacin Degradation

(1) Background: An increasing use of pharmaceutics imposes a need for the permanent development of efficient strategies, including the tailoring of highly specific new materials for their removal from the environment. Photocatalytic degradation has been the subject of increasing interest of the researchers in the field. (2) Methods: This paper is focused on the investigation of the possibility to deposit a thin metal layer on a TiO2 surface and study its photocatalytic performance for the degradation of ciprofloxacin using a combination of theoretical and experimental methods. (3) Results: Based on the extensive DFT screening of 24 d-metals' adhesion on TiO2, Cu was selected for further work, due to the satisfactory expected stability and good availability. The (Cu)TiO2 was successfully synthesized and characterized with XRD, SEM+EDS and UV-Vis spectrophotometry. The uniformly distributed copper on the TiO2 surface corresponds to the binding on high-affinity oxygen-rich sites, as proposed with DFT calculations. The photocatalytic degradation rate of ciprofloxacin was improved by about a factor of 1.5 compared to the bare non-modified TiO2. (4) Conclusions: The observed result was ascribed to the ability of adsorbed Cu to impede the agglomeration of TiO2 and increase the active catalytic area, and bandgap narrowing predicted with DFT calculations.

Integration of Metal-Organic Frameworks and Metals: Synergy for Electrocatalysis

Electrocatalysis is a highly promising technology widely used in clean energy conversion. There is a continuing need to develop advanced electrocatalysts to catalyze the critical electrochemical reactions. Integrating metal active species, including various metal nanostructures (NSs) and atomically dispersed metal sites (ADMSs), into metal-organic frameworks (MOFs) leads to the formation of promising heterogeneous electrocatalysts that take advantage of both components. Among them, MOFs can provide support and protection for the active sites on guest metals, and the resulting host-guest interactions can synergistically enhance the electrocatalytic performance. In this review, three key concerns on MOF-metal heterogeneous electrocatalysts regarding the catalytic sites, conductivity, and catalytic stability are first presented. Then, rational integration strategies of MOFs and metals, including the integration of metal NSs via surface anchoring, space confining, and MOF coating, as well as the integration of ADMSs either with the metal nodes/linkers or within the pores of MOFs, along with their recent progress on synergistic cooperation for specific electrochemical reactions are summarized. Finally, current challenges and possible solutions in applying these increasingly concerned electrocatalysts are also provided.

Progress in photocatalytic CO2 reduction based on single-atom catalysts

Reduced CO2 emissions, conversion, and reuse are critical steps toward carbon peaking and carbon neutrality. Converting CO2 into high-value carbon-containing compounds or fuels may effectively address the energy shortage and environmental issues, which is consistent with the notion of sustainable development. Photocatalytic CO2 reduction processes have become one of the research focuses, where single-atom catalysts have demonstrated significant benefits owing to their excellent percentage of atom utilization. However, among the crucial challenges confronting contemporary research is the production of efficient, low-cost, and durable photocatalysts. In this paper, we offer a comprehensive overview of the study growth on single-atom catalysts for photocatalytic CO2 reduction reactions, describe several techniques for preparing single-atom catalysts, and discuss the advantages and disadvantages of single-atom catalysts and present the study findings of three single-atom photocatalysts with TiO2, g-C3N4 and MOFs materials as carriers based on the interaction between single atoms and carriers, and finally provide an outlook on the innovation of photocatalytic CO2 reduction reactions.