Negative Electrocatalytic Effects of p-Doping Niobium and Tantalum on MoS2 and WS2 for the Hydrogen Evolution Reaction and Oxygen Reduction Reaction

Engineered Two-Dimensional Transition Metal Dichalcogenides for Energy Conversion and Storage

Designing efficient and cost-effective materials is pivotal to solving the key scientific and technological challenges at the interface of energy, environment, and sustainability for achieving NetZero. Two-dimensional transition metal dichalcogenides (2D TMDs) represent a unique class of materials that have catered to a myriad of energy conversion and storage (ECS) applications. Their uniqueness arises from their ultra-thin nature, high fractions of atoms residing on surfaces, rich chemical compositions featuring diverse metals and chalcogens, and remarkable tunability across multiple length scales. Specifically, the rich electronic/electrical, optical, and thermal properties of 2D TMDs have been widely exploited for electrochemical energy conversion (e.g., electrocatalytic water splitting), and storage (e.g., anodes in alkali ion batteries and supercapacitors), photocatalysis, photovoltaic devices, and thermoelectric applications. Furthermore, their properties and performances can be greatly boosted by judicious structural and chemical tuning through phase, size, composition, defect, dopant, topological, and heterostructure engineering. The challenge, however, is to design and control such engineering levers, optimally and specifically, to maximize performance outcomes for targeted applications. In this review we discuss, highlight, and provide insights on the significant advancements and ongoing research directions in the design and engineering approaches of 2D TMDs for improving their performance and potential in ECS applications.

Noble metal-free CZTS electrocatalysis: synergetic characteristics and emerging applications towards water splitting reactions

This review provides a comprehensive overview of the production and modification of CZTS nanoparticles (NPs) and their application in electrocatalysis for water splitting. Various aspects, including surface modification, heterostructure design with carbon nanostructured materials, and tunable electrocatalytic studies, are discussed. A key focus is the synthesis of small CZTS nanoparticles with tunable reactivity, emphasizing the sonochemical method's role in their formation. Despite CZTS's affordability, it often exhibits poor hydrogen evolution reaction (HER) behavior. Carbon materials like graphene, carbon nanotubes, and C60 are highlighted for their ability to enhance electrocatalytic activity due to their unique properties. The review also discusses the amine functionalization of graphene oxide/CZTS composites, which enhances overall water splitting performance. Doping with non-noble metals such as Fe, Co., and Ni is presented as an effective strategy to improve catalytic activity. Additionally, the synthesis of heterostructures consisting of CZTS nanoparticles attached to MoS2-reduced graphene oxide (rGO) hybrids is explored, showing enhanced HER activity compared to pure CZTS and MoS2. The growing demand for energy and the need for efficient renewable energy sources, particularly hydrogen generation, are driving research in this field. The review aims to demonstrate the potential of CZTS-based electrocatalysts for high-performance and cost-effective hydrogen generation with low environmental impact. Vacuum-based and non-vacuum-based methods for fabricating CZTS are discussed, with a focus on simplicity and efficiency. Future developments in CZTS-based electrocatalysts include enhancing activity and stability, improving charge transfer mechanisms, ensuring cost-effectiveness and scalability, increasing durability, integrating with renewable energy sources, and gaining deeper insight into reaction processes. Overall, CZTS-based electrocatalysts show great promise for sustainable hydrogen generation, with ongoing research focused on improving performance and advancing their practical applications.

Nb Doping and Alloying of 2D WS2 by Atomic Layer Deposition for 2D Transition Metal Dichalcogenide Transistors and HER Electrocatalysts

We utilize plasma-enhanced atomic layer deposition to synthesize two-dimensional Nb-doped WS2 and NbxW1-xSy alloys to expand the range of properties and improve the performance of 2D transition metal dichalcogenides for electronics and catalysis. Using a supercycle deposition process, films are prepared with compositions spanning the range from WS2 to NbS3. While the W-rich films form crystalline disulfides, the Nb-rich films form amorphous trisulfides. Through tuning the composition of the films, the electrical resistivity is reduced by 4 orders of magnitude compared to pure ALD-grown WS2. To produce Nb-doped WS2 films, we developed a separate ABC-type supercycle process in which a W precursor pulse precedes the Nb precursor pulse, thereby reducing the minimum Nb content of the film by a factor of 3 while maintaining a uniform distribution of the Nb dopant. Initial results are presented on the electrical and electrocatalytic performances of the films. Promisingly, the NbxW1-xSy films of 10 nm thickness and composition x ≈ 0.08 are p-type semiconductors and have a low contact resistivity of (8 ± 1) × 102 Ω cm to Pd/Au contacts, demonstrating their potential use in contact engineering of 2D TMD transistors.

Computational investigation of single and multiple boron atom doped WS2 monolayers for superior electrocatalytic reduction of nitrogen

The efficient conversion of nitrogen into ammonia plays a significant role in our modern society. Therefore, the design and development of associated catalysts have become an area of major research interest. Nowadays, an increasing number of studies have been exploring single-atom or double-atom metal-free electrocatalysts for the N2 reduction reaction, where regulating the precise number of catalyst atoms anchored on the substrate posed a real challenge. Herein, with density functional theory (DFT) simulations, this study investigated the activity of single and multiple B atom doped monolayer WS2 catalysts and observed superior efficiencies for nitrogen fixation and reduction. Computational results reveal that these novel catalysts have excellent thermodynamic stability, suitable adsorption of N2, superior catalytic activity and high selectivity for the nitrogen reduction reaction. Notably, this study clearly illustrates that the steric hindrance arising from the adjacent atoms of catalytic sites can be an effective route for manipulating the catalytic performance, offering new insights for the synthesis of high efficiency catalysts. In summary, this series of novel boron doped monolayer WS2 catalysts does not require precise control of the number of catalytic atoms on the substrate, making their preparation easier.

Unleashing the power of boron: enhancing nitrogen reduction reaction through defective ReS2 monolayers

Density functional theory (DFT) calculations were utilized to investigate the electrocatalytic potential of single boron (B) atom doping in defective ReS2 monolayers as an active site. Our investigation revealed that B-doped defective ReS2, containing S and S-Re-S defects, demonstrated remarkable conductivity, and emerged as an exceptionally active catalyst for nitrogen reduction reactions (NRR), exhibiting limiting potentials of 0.63 and 0.53 V, respectively. For both cases, we determined the potential by examining the hydrogenation of adsorbed N2* to N2H*. Although the competing hydrogen evolution reaction (HER) process appeared dominant in the S-Re-S defect case, its impact was minimal. The outstanding NRR performance can be ascribed to the robust chemical interactions between B and N atoms. The adsorption of N2 on B weakens the N-N bond, thereby facilitating the formation of NH3. Moreover, we verified the selectivity and stability of the catalysts for NRR. Our findings indicate that B-doped defective ReS2 monolayers hold considerable promise for electrocatalysis in a variety of applications.

Engineering the Local Atomic Configuration in 2H TMDs for Efficient Electrocatalytic Hydrogen Evolution

The introduction of heteroatoms is a widely employed strategy for electrocatalysis of transition metal dichalcogenides (TMDs). This approach activates the inactive basal plane, effectively boosting the intrinsic catalytic activity. However, the effect of atomic configurations incorporated within the TMDs' lattice on catalytic activity is not thoroughly understood owing to the lack of controllable synthetic approaches for highly doped TMDs. In this study, we demonstrate a facile approach to realizing heavily doped MoS₂ with a high doping concentration above 16% via intermediate-reaction-mediated chemical vapor deposition. As the V doping concentration increased, the incorporated V atoms coalesced in a manner that enabled both the basal plane activation and electrical conductivity enhancement of MoS₂. This accelerated the kinetics of the hydrogen evolution reaction (HER) through the reduced Gibbs free energy of hydrogen adsorption, as evidenced by experimental and theoretical analyses. Consequently, the coalesced V-doped MoS₂ exhibited superior HER performance, with an overpotential of 100 mV at 10 mA cm^-2, surpassing the pristine and single-atom-doped counterparts. This study provides an intriguing pathway for engineering the atomic doping configuration of TMDs to develop efficient 2D nanomaterial-based electrocatalysts.

Significantly Stabilizing Hydrogen Evolution Reaction Induced by Nb-Doping Pt/Co(OH)2 Nanosheets

High stability and efficiency of electrocatalysts are crucial for hydrogen evolution reaction (HER) toward water splitting in an alkaline media. Herein, a novel nano-Pt/Nb-doped Co(OH)₂ (Pt/NbCo(OH)₂ ) nanosheet is designed and synthesized using water-bath treatment and solvothermal reduction approaches. With nano-Pt uniformly anchored onto NbCo(OH)₂ nanosheet, the synthesized Pt/NbCo(OH)₂ shows outstanding electrocatalytic performances for alkaline HER, achieving a high stability for at least 33 h, a high mass activity of 0.65 mA µg^-1 Pt, and a good catalytic activity with a low overpotential of 112 mV at 10 mA cm^-2 . Both experimental and theoretical results prove that Nb-doping significantly optimizes the hydrogen adsorption free energy to accelerate the Heyrovsky step for HER, and boosts the adsorption of H₂ O, which further enhances the water activation. This study provides a new design methodology for the Nb-doped electrocatalysts in an alkaline HER field by facile and green way.

Combining Highly Dispersed Amorphous MoS3 with Pt Nanodendrites as Robust Electrocatalysts for Hydrogen Evolution Reaction

Surface modification of electrocatalysts to obtain new or improved electrocatalytic performance is currently the main strategy for designing advanced nanocatalysts. In this work, highly dispersed amorphous molybdenum trisulfide-anchored Platinum nanodendrites (denoted as Pt-a-MoS₃  NDs) are developed as efficient hydrogen evolution electrocatalysts. The formation mechanism of spontaneous in situ polymerization MoS₄ ^2- into a-MoS₃ on Pt surface is discussed in detail. It is verified that the highly dispersed a-MoS₃ enhances the electrocatalytic activity of Pt catalysts under both acidic and alkaline conditions. The potentials at the current density of 10 mA cm^-2 (η₁₀ ) in 0.5 m sulfuric acid (H₂ SO₄ ) and 1 m potassium hydroxide (KOH) electrolyte are -11.5 and -16.3 mV, respectively, which is significantly lower than that of commercial Pt/C (-20.2 mV and -30.7 mV). This study demonstrates that such high activity benefits from the interface between highly dispersed a-MoS₃ and Pt sites, which act as the preferred adsorption sites for the efficient conversion of hydrion (H⁺ ) to hydrogen (H₂ ). Additionally, the anchoring of highly dispersed clusters to Pt substrate greatly enhances the corresponding electrocatalytic stability.

Recent Advances in Defect-Engineered Transition Metal Dichalcogenides for Enhanced Electrocatalytic Hydrogen Evolution: Perfecting Imperfections

Switching to renewable, carbon-neutral sources of energy is urgent and critical for climate change mitigation. Despite how hydrogen production by electrolyzing water can enable renewable energy storage, current technologies unfortunately require rare and expensive platinum group metal electrocatalysts, which limit their economic viability. Transition metal dichalcogenides (TMDs) are low-cost, earth-abundant materials that possess the potential to replace platinum as the hydrogen evolution catalyst for water electrolysis, but so far, pristine TMDs are plagued by poor catalytic performances. Defect engineering is an attractive approach to enhance the catalytic efficiency of TMDs and is not subjected to the limitations of other approaches like phase engineering and surface structure engineering. In this minireview, we discuss the recent progress made in defect-engineered TMDs as efficient, robust, and low-cost catalysts for water splitting. The roles of chalcogen atomic defects in engineering TMDs for improvements to the hydrogen evolution reaction (HER) are summarized. Finally, we highlight our perspectives on the challenges and opportunities of defect engineering in TMDs for electrocatalytic water splitting. We hope to provide inspirations for designing the state-of-the-art catalysts for future breakthroughs in the electrocatalytic HER.

Engineering Vacancies at the 2D Nanocrystals for Robust Bifunctional Electrocatalysts

Hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) through water decomposition are feasible methods to produce green and clean energy. Herein, we report a facile two-step strategy for the preparation of non-noble metal defect-rich nanosheets by an electrochemical process at room temperature. First-principle calculations are used to study the bifunctional catalytic reaction mechanism of defect engineering in transition-metal dichalcogenides (TMDs); from the first-principle calculations, we predicted that the rich S vacancies on the nanosheet promoted electron transfer and reduced the energy barrier of electrocatalysis. As a substantiation, we conducted HER/OER electrochemical characterizations and found that the defect-rich atomic-thick tantalum sulfide is a kind of dual-function electrocatalyst with enhanced comprehensive properties of Tafel slope (39 mV/dec for HER, 38 mV/dec for OER) and low overpotential (0.099 V for HER, 0.153 V for OER) in acidic and alkaline environments, respectively. Likewise, the defect-rich catalysts exhibit high stability in acidic and alkaline solutions, which have potential applications as electrocatalysts for the large-scale production of hydrogen and oxygen.

Snowflake-like Metastable Wurtzite CuGaS2/MoS2 Composite with Superior Electrochemical HER Activity

In the present work, we report the synthesis of wurtzite CuGaS₂ and its composite with MoS₂ and explored their efficacy toward two important applications, viz. electrocatalytic hydrogen evolution reaction (HER) and adsorption of Rhodamine B dye. The CuGaS₂ was synthesized via a low-temperature ethylenediamine-mediated solvothermal method. The obtained products were characterized by various techniques such as X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy to ascertain the phase formation, surface morphology, and elemental oxidation states. The electrocatalytic activity of the wurtzite CuGaS₂ and CuGaS₂/MoS₂ composites toward HER was investigated, wherein the CuGaS₂/MoS₂ composite exhibited superior activity when compared to the pristine sample with a small Tafel slope of 56.2 mV dec^-1 and an overpotential value of -464 mV at the current density of 10 mA cm^-2. On the other hand, the synthesized CuGaS₂ also showed an impressive adsorption behavior toward Rhodamine B dye with 99% adsorption in 60 min, which is relatively better than that observed with the composite material.

Full Composition Tuning of W1-xNbxSe2 Alloy Nanosheets to Promote the Electrocatalytic Hydrogen Evolution Reaction

Composition modulation of transition metal dichalcogenides is an effective way to engineer their crystal/electronic structures for expanded applications. Here, fully composition-tuned W_1-xNb_xSe₂ alloy nanosheets were produced via colloidal synthesis. These nanosheets ultimately exhibited a notable transition between WSe₂ and NbSe₂ hexagonal phases at x = 0.6. As x approaches 0.6, point doping is converted into cluster doping and eventually separated domains of WSe₂ and NbSe₂. Extensive density functional theory calculations predicted the composition-dependent crystal structures and phase transitions, consistently with the experiments. The electrocatalytic activity for the hydrogen evolution reaction (HER) in acidic electrolyte was significantly enhanced at x = 0.2, which was linked with the d-band center. The Gibbs free energy for the H adsorption at various basal and edge sites supported the enhanced HER performance of the metallic alloy nanosheets. We suggested that the dispersed doping structures of Nb atoms resulted in the best HER performance. Our findings highlight the significance of composition tuning in enhancing the catalytic activity of alloys.

Electronic Properties and Electrocatalytic Water Splitting Activity for Precious-Metal-Adsorbed Silicene with Nonmetal Doping

Since nonmetal (NM)-doped two-dimensional (2D) materials can effectively modulate their physical properties and chemical activities, they have received a lot of attention from researchers. Therefore, the stability, electronic properties, and electrocatalytic water splitting activity of precious-metal (PM)-adsorbed silicene doped with two NM atoms are investigated based on density functional theory (DFT) in this paper. The results show that NM doping can effectively improve the stability of PM-adsorbed silicene and exhibit rich electronic properties. Meanwhile, by comparing the free energies of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) intermediates of 15 more stable NM-doped systems, it can be concluded that the electrocatalytic water splitting activity of the NM-doped systems is more influenced by the temperature. Moreover, the Si-S2-Ir-doped system exhibits good HER performance when the temperature is 300 K, while the Si-N2-Pt-doped system shows excellent OER activity. Our theoretical study shows that NM doping can effectively promote the stability and electrocatalytic water splitting of PM-adsorbed silicene, which can help in the application of silicene in electrocatalytic water splitting.

Electronic and optical properties of Nb/V-doped WS2 monolayer: a first-principles study

The electronic, dielectric, and optical properties of pure and Nb/V-doped WS₂ monolayer are being investigated using the first-principles density functional theory (DFT). The electronic band structure calculations reveal that the pure and doped WS₂ monolayer is a direct band gap semiconductor. It is seen that the doping not only slightly reduces the band gap but also changes the n-type character of pure WS₂ monolayer to the p-type character. Hence, it may be useful for channel material in field effect transistors (FETs). Moreover, the optical studies reveal that the WS₂ monolayer shows a significantly good optical response. However, a small ultraviolet shift is observed in the optical response of the doped case compared to the pristine WS₂ monolayer. This study suggests that the WS₂ monolayer can be a possible optical material for optoelectronic applications, and it can also be a replacement of MoS₂ -based future electronics and optoelectronics.

Transition Metal Non-Oxides as Electrocatalysts: Advantages and Challenges

The identification of hydrogen as green fuel in the near future has stirred global realization toward a sustainable outlook and thus boosted extensive research in the field of water electrolysis focusing on the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR). A huge class of compounds consisting of transition metal-based nitrides, carbides, chalcogenides, phosphides, and borides, which can be collectively termed transition metal non-oxides (TMNOs), has emerged recently as an efficient class of electrocatalysts in terms of performance and longevity when compared to transition metal oxides (TMOs). Moreover, the superiority of TMNOs over TMOs to effectively catalyze not only OERs but also HERs and ORRs renders bifunctionality and even trifunctionality in some cases and therefore can replace conventional noble metal electrocatalysts. In this review, the crystal structure and phases of different classes of nanostructured TMNOs are extensively discussed, focusing on recent advances in design strategies by various regulatory synthetic routes, and hence diversified properties of TMNOs are identified to serve as next-generation bi/trifunctional electrocatalysts. The challenges and future perspectives of materials in the field of energy conversion and storage aiding toward a better hydrogen economy are also discussed in this review.

RF Sputtered Nb-Doped MoS2 Thin Film for Effective Detection of NO2 Gas Molecules: Theoretical and Experimental Studies

Doping plays a significant role in affecting the physical and chemical properties of two-dimensional (2D) dichalcogenide materials. Controllable doping is one of the major factors in the modification of the electronic and mechanical properties of 2D materials. MoS₂ 2D materials have gained significant attention in gas sensing owing to their high surface-to-volume ratio. However, low response and recovery time hinder their application in practical gas sensors. Herein, we report the enhanced gas response and recovery of Nb-doped MoS₂ gas sensor synthesized through physical vapor deposition (PVD) toward NO₂ at different temperatures. The electronic states of MoS₂ and Nb-doped MOS₂ monolayers grown by PVD were analyzed based on their work functions. Doping with Nb increases the work function of MoS₂ and its electronic properties. The Nb-doped MoS₂ showed an ultrafast response and recovery time of t _rec = 30/85 s toward 5 ppm of NO₂ at their optimal operating temperature (100 °C). The experimental results complement the electron difference density functional theory calculation, showing both physisorption and chemisorption of NO₂ gas molecules on niobium substitution doping in MoS₂.

Green Synthesis of Flowerball-like MoS2/VC Nanocomposite and Its Efficient Catalytic Performance for Oxygen Reduction Either in Alkaline or Acid Media

Opening up electrocatalysts for oxygen reduction reaction (ORR) is essential for practical application in fuel cells and metal-air batteries; however, how to make the catalysts with both good performance and low cost is difficult. Recently, research on the ORR of molybdenum disulfide-based catalysts in alkaline electrolytes has been on the rise. However, the development of MoS2 catalyst for acidic ORR is still in its infancy. Herein, without using reductant and morphology control reagent, we firstly obtained flowerball-like MoS2/Vulcan XC-72R (VC) nanocomposites via hydrothermal method. The designed composite exhibits a nearly 4e− ORR process with 0.78 and 0.92 V onset potentials in 0.1 M KOH and HClO4, respectively. Furthermore, the flowerball-like composite shows utmost electrochemical stability judging by 87 and 80% current retention for about 5.5 h either in alkaline or acid media, long term durability for continuous 10,000 cycles, and stronger resistance to methanol than the commercial Pt/C catalyst. The abundant Mo edges as catalytic active centers of flowerball-like structure, high electron conductivity, and enhanced mass transport in either alkaline or acidic electrolyte are favorable for catalytic performance. The prepared catalyst provides great potential for the substitution of noble metal based catalysts in fuel cells and metal-air batteries.

A cobalt-doped WS2/WO3 nanocomposite electrocatalyst for the hydrogen evolution reaction in acidic and alkaline media

A simple preparation method of doped nanoflowers produces improved catalytic activity due to the complex structure of the phases and compositions.

Controllable fabrication and photocatalytic performance of nanoscale single-layer MoSe2 islands with substantial edges on an Ag(111) substrate

Two-dimensional (2D) transition metal dichalcogenides (TMDs) are emerging as new electrocatalysts and photocatalysts. The edge sites of 2D TMDs show high catalytic activity and are thus favored at the catalyst surface over TMD inert basal planes. However, 2D TMDs that predominantly expose edges are thermodynamically unfavorable, limiting the number of edge sites at the surface. Herein, we demonstrate a controllable synthesis strategy of single-layer 2D MoSe₂ islands with a lateral size of approximately 5-12 nm on an Ag(111) substrate by pre-deposition of excess Se atoms. The surplus Se atoms react with the Ag(111) substrate and form silver selenide compounds to separate MoSe₂ islands and further prevent MoSe₂ islands from growing up. The nanoscale MoSe₂ islands greatly increase the ratio of exposed edge sites relative to the basal plane sites, which leads to excellent photocatalytic activity for the degradation of a methylene blue (MB) organic pollutant. This work paves the way to limit the size of 2D TMDs at the nanoscale and enables new opportunities for enhancing the catalytic activity of 2D TMD materials.

Robust wrinkled MoS2/N-C bifunctional electrocatalysts interfaced with single Fe atoms for wearable zinc-air batteries

The ability to create highly efficient and stable bifunctional electrocatalysts, capable of oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in the same electrolyte, represents an important endeavor toward high-performance zinc-air batteries (ZABs). Herein, we report a facile strategy for crafting wrinkled MoS₂/N-doped carbon core/shell nanospheres interfaced with single Fe atoms (denoted MoS₂@Fe-N-C) as superior ORR/OER bifunctional electrocatalysts for robust wearable ZABs with a high capacity and outstanding cycling stability. Specifically, the highly crumpled MoS₂ nanosphere core is wrapped with a layer of single-Fe-atom-impregnated, N-doped carbon shell (i.e., Fe-N-C shell with well-dispersed FeN₄ sites). Intriguingly, MoS₂@Fe-N-C nanospheres manifest an ORR half-wave potential of 0.84 V and an OER overpotential of 360 mV at 10 mA⋅cm^-2 More importantly, density functional theory calculations reveal the lowered energy barriers for both ORR and OER, accounting for marked enhanced catalytic performance of MoS₂@Fe-N-C nanospheres. Remarkably, wearable ZABs assembled by capitalizing on MoS₂@Fe-N-C nanospheres as an air electrode with an ultralow area loading (i.e., 0.25 mg⋅cm^-2) display excellent stability against deformation, high special capacity (i.e., 442 mAh⋅g^-1 _Zn), excellent power density (i.e., 78 mW⋅cm^-2) and attractive cycling stability (e.g., 50 cycles at current density of 5 mA⋅cm^-2). This study provides a platform to rationally design single-atom-interfaced core/shell bifunctional electrocatalysts for efficient metal-air batteries.

The Versatile Electronic, Magnetic and Photo-Electro Catalytic Activity of a New 2D MA2 Z4 Family*

The recent successful growth of MoSi₂ N₄ and WSi₂ N₄ monolayers led to the discovery of a new class of the two-dimensional (2D) MA₂ Z₄ materials with no known 3D layered allotropes, which renders great possibilities to integrate diverse properties by proper design of sandwiched "MZ₂ " building blocks and "A-Z" passivation layers. In this work, the dynamic stability, electronic properties, and surface reactivity of the new MA₂ Z₄ family, in which M is Ti, Zr, Hf, V, Nb, Ta, Cr, Mo, W, A refers to Si or Ge, and Z is N, P or As, is theoretically probed. Among the proposed 54 possible combinations, about 42 compositions are dynamically stable, which vary from non-magnetic, anti-ferromagnetic, to ferromagnetic semiconductors, metals and half-metals. In particular, the VB (V, Nb, Ta) MA₂ Z₄ possesses robust intrinsic ferromagnetism that is essential for spintronics applications. In regard to surface activity, most MA₂ Z₄ , particularly N- or P-terminated IVB and VB MA₂ Z₄ , have high catalytic potential for hydrogen evolution, and the ▵G_H of non-magnetic MA₂ Z₄ is highly correlated to the highest occupied p electronic states of the surface Z atoms. The photocatalytic activity is also evaluated. MoSi₂ N₄ and WSi₂ N₄ within 4 % tensile strain are capable of photocatalytic overall water splitting. The findings indicate the new 2D MA₂ Z₄ family has fascinating properties and possesses strong potential for applications but not limited to electronics, spintronics and catalysts, which will stimulate the interests of experimental synthesis.

Insight into electrocatalytic activity and mechanism of bimetal niobium-based oxides in situ embedded into biomass-derived porous carbon skeleton nanohybrids for photovoltaics and alkaline hydrogen evolution

Developing highly-efficient multifunctional electrocatalysts for energy conversion devices is of great importance. A sequence of nano-sized bimetal (Al, Cr, Fe) niobium oxide nanoparticles anchored on aloe peel-derived porous carbon skeleton hybrids (AN/APPC, CN/APPC, and FN/APPC) are successfully prepared via co-precipitation avenue and used as electrocatalysts for photovoltaics and alkaline hydrogen evolution reaction. Benefiting from the synergies between nano-sized metal niobium oxides and highly conductive porous carbon skeleton, these robust polycomponent hybrid electrocatalysts exhibit superior catalytic performances for accelerating the triiodide reduction and hydrogen evolution reaction. The solar cell with AN/APPC electrocatalyst achieves an outstanding device efficiency of 7.31%, superior to that with Pt (6.84%), and the AN/APPC electrocatalyst exhibit an overpotential (131.6 mV) when the current density is 10 mA cm^-2 and Tafel slope (54 mV dec^-1) in 1 M KOH for hydrogen evolution reaction. The AN/APPC electrocatalysts illustrate remarkable electrochemical durability in both I₃^-/I^- electrolyte and alkaline media. Furthermore, the catalytic mechanism was clarified both from the electronic structure and work function through first-principle density functional theory (DFT) calculations. This work opens a new avenue for electrocatalysis field via using nano-sized porous bio-carbon skeleton loaded with niobium-based binary metal.

Phase Transitions and Water Splitting Applications of 2D Transition Metal Dichalcogenides and Metal Phosphorous Trichalcogenides

2D layered materials turn out to be the most attractive hotspot in materials for their unique physical and chemical properties. A special class of 2D layered material refers to materials exhibiting phase transition based on environment variables. Among these materials, transition metal dichalcogenides (TMDs) act as a promising alternative for their unique combination of atomic-scale thickness, direct bandgap, significant spin-orbit coupling and prominent electronic and mechanical properties, enabling them to be applied for fundamental studies as catalyst materials. Metal phosphorous trichalcogenides (MPTs), as another potential catalytic 2D phase transition material, have been employed for their unusual intercalation behavior and electrochemical properties, which act as a secondary electrode in lithium batteries. The preparation of 2D TMD and MPT materials has been extensively conducted by engineering their intrinsic structures at the atomic scale. In this study, advanced synthesis methods of preparing 2D TMD and MPT materials are tested, and their properties are investigated, with stress placed on their phase transition. The surge of this type of report is associated with water-splitting catalysis and other catalytic purposes. This study aims to be a guideline to explore the mentioned 2D TMD and MPT materials for their catalytic applications.

Concurrent Vacancy and Adatom Defects of Mo1-xNbxSe2 Alloy Nanosheets Enhance Electrochemical Performance of Hydrogen Evolution Reaction

Earth-abundant transition metal dichalcogenide nanosheets have emerged as an excellent catalyst for electrochemical water splitting to generate H₂. Alloying the nanosheets with heteroatoms is a promising strategy to enhance their catalytic performance. Herein, we synthesized hexagonal (2H) phase Mo_1-xNb_xSe₂ nanosheets over the whole composition range using a solvothermal reaction. Alloying results in a variety of atomic-scale crystal defects such as Se vacancies, metal vacancies, and adatoms. The defect content is maximized when x approaches 0.5. Detailed structure analysis revealed that the NbSe₂ bonding structures in the alloy phase are more disordered than the MoSe₂ ones. Compared to MoSe₂ and NbSe₂, Mo_0.5Nb_0.5Se₂ exhibits much higher electrocatalytic performance for hydrogen evolution reaction. First-principles calculation was performed for the formation energy in the models for vacancies and adatoms, supporting that the alloy phase has more defects than either NbSe₂ or MoSe₂. The calculation predicted that the separated NbSe₂ domain at x = 0.5 favors the concurrent formation of Nb/Se vacancies and adatoms in a highly cooperative way. Moreover, the Gibbs free energy along the reaction path suggests that the enhanced HER performance of alloy nanosheets originates from the higher concentration of defects that favor H atom adsorption.

Structural Engineering of Ultrathin ReS2 on Hierarchically Architectured Graphene for Enhanced Oxygen Reduction

Herein, binary heteronanosheets made of ultrathin ReS₂ nanosheets and reduced graphene oxide (RGO) with either a two-dimensional (2D) "sheet-on-sheet" architecture (2D ReS₂/RGO) or a three-dimensional hierarchical structure (3D ReS₂/RGO) are constructed through rational structure-engineering strategies. In the resultant 3D ReS₂/RGO heteronanosheets, the ultrathin ReS₂ nanosheets are bridged on the RGO surface through Re-O bonds in a vertically oriented manner, which endows the heteronanosheets with open frameworks and a hierarchical porous structure. In sharp contrast to the 2D ReS₂/RGO, the 3D ReS₂/RGO heteronanosheets are featured with abundant active sites and channels for efficient electrolyte ions transport. This, coupled with the strong affinity toward oxygen-containing intermediates intrinsically associated with the binary ReS₂/RGO structure, imparts excellent oxygen reduction performance to the 3D ReS₂/RGO heteronanosheets for potential applications in fuel cells and metal-air batteries.

Chlorine doping of MoSe2 flakes by ion implantation

The efficient integration of transition metal dichalcogenides (TMDs) into the current electronic device technology requires mastering the techniques of effective tuning of their optoelectronic properties. Specifically, controllable doping is essential. For conventional bulk semiconductors, ion implantation is the most developed method offering stable and tunable doping. In this work, we demonstrate n-type doping in MoSe₂ flakes realized by low-energy ion implantation of Cl⁺ ions followed by millisecond-range flash lamp annealing (FLA). We further show that FLA for 3 ms with a peak temperature of about 1000 °C is enough to recrystallize implanted MoSe₂. The Cl distribution in few-layer-thick MoSe₂ is measured by secondary ion mass spectrometry. An increase in the electron concentration with increasing Cl fluence is determined from the softening and red shift of the Raman-active A_1g phonon mode due to the Fano effect. The electrical measurements confirm the n-type doping of Cl-implanted MoSe₂. A comparison of the results of our density functional theory calculations and experimental temperature-dependent micro-Raman spectroscopy data indicates that Cl atoms are incorporated into the atomic network of MoSe₂ as substitutional donor impurities.

Identifying Metallic Transition-Metal Dichalcogenides for Hydrogen Evolution through Multilevel High-Throughput Calculations and Machine Learning

High-performance electrocatalysts not only exhibit high catalytic activity but also have sufficient thermodynamic stability and electronic conductivity. Although metallic 1T-phase MoS₂ and WS₂ have been successfully identified to have high activity for hydrogen evolution reaction, designing more extensive metallic transition-metal dichalcogenides (TMDs) faces a large challenge because of the lack of a full understanding of electronic and composition attributes related to catalytic activity. In this work, we carried out systematic high-throughput calculation screening for all possible existing two-dimensional TMD (2D-TMD) materials to obtain high-performance hydrogen evolution reaction (HER) electrocatalysts by using a few important criteria, such as zero band gap, highest thermodynamic stability among available phases, low vacancy formation energy, and approximately zero hydrogen adsorption energy. A series of materials-perfect monolayer VS₂ and NiS₂, transition-metal ion vacancy (TM-vacancy) ZrTe₂ and PdTe₂, chalcogenide ion vacancy (X-vacancy) MnS₂, CrSe₂, TiTe₂, and VSe₂-have been identified to have catalytic activity comparable with that of Pt(111). More importantly, electronic structural analysis indicates active electrons induced by defects are mostly delocalized in the nearest-neighbor and next-nearest neighbor range, rather than a single-atom active site. Combined with the machine learning method, the HER-catalytic activity of metallic phase 2D-TMD materials can be described quantitatively with local electronegativity (0.195·LEf + 0.205·LEs) and valence electron number (Vtmx), where the descriptor is ΔG_H* = 0.093 - (0.195·LEf + 0.205·LEs) - 0.15·Vtmx.

Positive and Negative Effects of Dopants toward Electrocatalytic Activity of MoS2 and WS2: Experiments and Theory

Two-dimensional transition-metal dichalcogenides (TMDs) are lately in the scope within the scientific community owing to their exploitation as affordable catalysts for next-generation energy devices. Undoubtedly, only precise tailoring and control over the catalytic properties can ensure high efficiency and successful implementation of such devices in day-to-day practical utilization. However, contrary to theoretical predictions, systematic experimental work dealing with the doped materials and their impact to electrocatalysis are relatively underrated despite the considerable effect that it could bring into this field. Herein, we investigate the effect of four different dopants (i.e., Ti, V, Mn, and Fe) incorporated to both layered MoS₂ and WS₂ as solid-state solution toward their electrocatalytic performance through their evaluation as catalysts for oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER). Our results pointed out that doping by Mn and Fe can enhance the electrocatalytic performance toward ORR, whereas doping by Ti and V revealed poor electrocatalytic effects (inhibition) compared to both undoped MoS₂ and WS₂. Surprisingly, none of the dopants contributed to the improvement of either MoS₂ or WS₂ toward HER activity. Therefore, in addition to the experimental data, density functional theory calculations were performed to further investigate the role of the dopants in the performance of MoS₂ toward HER. According to these calculations, all dopants preferably occupied the edges of the crystal structure and thus could affect the electrocatalytic properties of the initial material. However, the observed ΔG values for hydrogen adsorption revealed that MoS₂ is the best catalyst with a subsequent trend for doped materials following the less negative binding energies V < Ti < Mn < Fe, which was in good agreement with experimentally obtained overpotentials of the respective samples. This study thus elucidates the reasons for negative effects of doping in TMDs. This study brings an insight that not all dopants are beneficial and not all reactions are affected in the same way by dopants in TMDs.

Two-Dimensional Transition Metal Chalcogenides for Alkali Metal Ions Storage

On the heels of exacerbating environmental concerns and ever-growing global energy demand, development of high-performance renewable energy-storage and -conversion devices has aroused great interest. The electrode materials, which are the critical components in electrochemical energy storage (EES) devices, largely determine the energy-storage properties, and the development of suitable active electrode materials is crucial to achieve efficient and environmentally friendly EES technologies albeit the challenges. Two-dimensional transition-metal chalcogenides (2D TMDs) are promising electrode materials in alkali metal ion batteries and supercapacitors because of ample interlayer space, large specific surface areas, fast ion-transfer kinetics, and large theoretical capacities achieved through intercalation and conversion reactions. However, they generally suffer from low electronic conductivities as well as substantial volume change and irreversible side reactions during the charge/discharge process, which result in poor cycling stability, poor rate performance, and low round-trip efficiency. In this Review, recent advances of 2D TMDs-based electrode materials for alkali metal-ion energy-storage devices with the focus on lithium-ion batteries (LIBs), sodium-ion batteries (SIBs), potassium-ion batteries (PIBs), high-energy lithium-sulfur (Li-S), and lithium-air (Li-O₂ ) batteries are described. The challenges and future directions of 2D TMDs-based electrode materials for high-performance LIBs, SIBs, PIBs, Li-S, and Li-O₂ batteries as well as emerging alkali metal-ion capacitors are also discussed.

NO disproportionation over defective 1T′-MoS2 monolayers

NO disproportionation can be catalyzed by MoS₂ monolayers loaded with S vacancies. When the MoS₂ sheet is under 3% compressive strain, two NO molecules at a S vacancy can form a NO₂. The left N atom will react with a third NO to afford N₂O under 3% tensile strain.

Recent advances in two-dimensional materials and their nanocomposites in sustainable energy conversion applications

Two-dimensional (2D) materials have a wide platform in research and expanding nano- and atomic-level applications. This study is motivated by the well-established 2D catalysts, which demonstrate high efficiency, selectivity and sustainability exceeding that of classical noble metal catalysts for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and/or hydrogen evolution reaction (HER). Nowadays, the hydrogen evolution reaction (HER) in water electrolysis is crucial for the cost-efficient production of a pure hydrogen fuel. We will also discuss another important point related to electrochemical carbon dioxide and nitrogen reduction (ECR and N2RR) in detail. In this review, we mainly focused on the recent progress in the fuel cell technology based on 2D materials, including graphene, transition metal dichalcogenides, black phosphorus, MXenes, metal-organic frameworks, and metal oxide nanosheets. First, the basic attributes of the 2D materials were described, and their fuel cell mechanisms were also summarized. Finally, some effective methods for enhancing the performance of the fuel cells based on 2D materials were also discussed, and the opportunities and challenges of 2D material-based fuel cells at the commercial level were also provided. This review can provide new avenues for 2D materials with properties suitable for fuel cell technology development and related fields.

Feasibility of using laser-induced breakdown spectroscopy for analyzing deposit formation change of molybdenum disulfide on gas diffusion electrode due to coating method

This study aimed to evaluate the relationship between the performance of electro-catalysis and the uniformity of molybdenum disulfide (MoS₂) on carbon electrodes deposited according to three different coating methods, namely, drop-casting, brushing, and spraying. The electrochemical kinetics can be determined by how uniformly the catalyst is coated throughout the entire surface of the electrodes. Laser-induced breakdown spectroscopy was employed to investigate the uniformity and loading quantity of MoS₂ on the electrode surface. The most uniform coating was achieved with the spraying method followed by brushing and drop-casting.

Two-dimensional MoS2/Fe-phthalocyanine hybrid nanostructures as excellent electrocatalysts for hydrogen evolution and oxygen reduction reactions

Two-dimensional (2D) MoS2 nanostructures have been extensively investigated in recent years because of their fascinating electrocatalytic properties. Herein, we report 2D hybrid nanostructures consisting of 1T' phase MoS2 and Fe-phthalocyanine (FePc) molecules that exhibit excellent catalytic activity toward both the hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR). X-ray absorption spectra revealed an increased Fe-N distance (2.04 Å) in the hybrid complex relative to the isolated FePc. Spin-polarized density functional theory calculations predicted that the Fe center moves toward the MoS2 layer and induces a non-planar structure with an increased Fe-N distance of 2.05 Å, which supports the experimental results. The experiments and calculations consistently show a significant charge transfer from FePc to stabilize the hybrid complex. The excellent HER catalytic performance of FePc-MoS2 is characterized by a low Tafel slope of 32 mV dec-1 at a current density of 10 mA cm-2 and an overpotential of 0.123 V. The ORR catalytic activity is superior to that of the commercial Pt/C catalyst in pH 13 electrolyte, with a more positive half-wave potential (0.89 vs. 0.84 V), a smaller Tafel slope (35 vs. 87 mV·dec-1), and a much better durability (9.3% vs. 40% degradation after 20 h). Such remarkable catalytic activity is ascribed to the HER-active 1T' phase MoS2 and the ORR-active nonplanar Fe-N4 site of FePc.

Carbon doping of WS2 monolayers: Bandgap reduction and p-type doping transport

Chemical doping constitutes an effective route to alter the electronic, chemical, and optical properties of two-dimensional transition metal dichalcogenides (2D-TMDs). We used a plasma-assisted method to introduce carbon-hydrogen (CH) units into WS₂ monolayers. We found CH-groups to be the most stable dopant to introduce carbon into WS₂, which led to a reduction of the optical bandgap from 1.98 to 1.83 eV, as revealed by photoluminescence spectroscopy. Aberration corrected high-resolution scanning transmission electron microscopy (AC-HRSTEM) observations in conjunction with first-principle calculations confirm that CH-groups incorporate into S vacancies within WS₂. According to our electronic transport measurements, undoped WS₂ exhibits a unipolar n-type conduction. Nevertheless, the CH-WS₂ monolayers show the emergence of a p-branch and gradually become entirely p-type, as the carbon doping level increases. Therefore, CH-groups embedded into the WS₂ lattice tailor its electronic and optical characteristics. This route could be used to dope other 2D-TMDs for more efficient electronic devices.