Probing the Mechanism of Aqueous CO2 Reduction on Post-Transition-Metal Electrodes using ATR-IR Spectroelectrochemistry

Advances in the Stability of Catalysts for Electroreduction of CO2 to Formic Acid

The electroreduction of CO2 to high-value products is a promising approach for achieving carbon neutrality. Among these products, formic acid stands out as having the most potential for industrialization due to its optimal economic value in terms of consumption and output. In recent years, the Faraday efficiency of formic acid from CO2 electroreduction has reached 90~100 %. However, this high selectivity cannot be maintained for extended periods under high currents to meet industrial requirements. This paper reviews excellent work from the perspective of catalyst stability, summarizing and discussing the performance of typical catalysts. Strategies for preparing stable and highly active catalysts are also briefly described. This review may offer a useful data reference and valuable guidance for the future design of long-stability catalysts.

Unveiled the Structure-Selectivity Relationship for Carbon Dioxide Reduction Triggered by Bi-Doped Cu-Based Nanocatalysts

To investigate synergistic effect between geometric and electronic structures on directing CO2RR selectivity, water phase synthetic protocol and surface architecture engineering strategy are developed to construct monodispersed Bi-doped Cu-based nanocatalysts. The strongly correlated catalytic directionality and Bi3+ dopant can be rationalized by the regulation of [*COOH]/[*CO] adsorption capacities through the appropriate doping of Bi3+ electronic modulator, resulting in volcano relationship between FECO/TOFCO and surface EVBM values. Spectroscopic study reveals that the dual-site binding mode ([Cu─μ─C(═O)O─Bi3+]) enabled by Cu1Bi3+ 2 motif in single-phase Cu150Bi1 nanocatalyst drives CO2-to-CO conversion. In contrast, the study of dynamic Bi speciation and phase transformation in dual-phase Cu50Bi1 nanocatalyst unveils that the Bi0-Bi0 contribution emerges at the expense of BOC phase, suggesting metallic Bi0 phase acting as [H]˙ formation center switches CO2RR selectivity toward CO2-to-HCOO- conversion via [*OCHO] and [*OCHOK] intermediates. This work provides significant insight into how geometric architecture cooperates with electronic effect and catalytic motif/phase to guide the selectivity of electrocatalytic CO2 reduction through the distinct surface-bound intermediates and presents molecular-level understanding of catalytic mechanism for CO/HCOO- formation.

Importance of Site Diversity and Connectivity in Electrochemical CO Reduction on Cu

Electrochemical CO2 reduction on Cu is a promising approach to produce value-added chemicals using renewable feedstocks, yet various Cu preparations have led to differences in activity and selectivity toward single and multicarbon products. Here, we find, surprisingly, that the effective catalytic activity toward ethylene improves when there is a larger fraction of less active sites acting as reservoirs of *CO on the surface of Cu nanoparticle electrocatalysts. In an adaptation of chemical transient kinetics to electrocatalysis, we measure the dynamic response of a gas diffusion electrode (GDE) cell when the feed gas is abruptly switched between Ar (inert) and CO. When switching from Ar to CO, CO reduction (COR) begins promptly, but when switching from CO to Ar, COR can be maintained for several seconds (delay time) despite the absence of the CO reactant in the gas phase. A three-site microkinetic model captures the observed dynamic behavior and shows that Cu catalysts exhibiting delay times have a less active *CO reservoir that exhibits fast diffusion to active sites. The observed delay times and the estimated *CO reservoir sizes are affected by catalyst preparation, applied potential, and microenvironment (electrolyte cation identity, electrolyte pH, and CO partial pressure). Notably, we estimate that the *CO reservoir surface coverage can be as high as 88 ± 7% on oxide-derived Cu (OD-Cu) at high overpotentials (-1.52 V vs SHE) and this increases in reservoir coverage coincide with increased turnover frequencies to ethylene. We also estimate that *CO can travel substantial distances (up to 10s of nm) prior to desorption or reaction. It appears that active C-C coupling sites by themselves do not control selectivity to C2+ products in electrochemical COR; the supply of CO to those sites is also a crucial factor. More generally, the overall activity of Cu electrocatalysts cannot be approximated from linear combinations of individual site activities. Future designs must consider the diversity of the catalyst network and account for intersite transportation pathways.

Active-site stabilized Bi metal-organic framework-based catalyst for highly active and selective electroreduction of CO2 to formate over a wide potential window

Bismuth-based materials have been validated to be a kind of effective electrocatalyst for electrocatalytic CO2 reduction (ECR) to formate (HCOO-). However, the established studies still encounter the problems of low current density, low selectivity, narrow potential window, and poor catalyst stability. Herein, a bismuth-terephthalate framework (Bi-BDC MOF) material was successfully synthesized. The optimized Bi-BDC-120 °C exhibited excellent activity, selectivity, and durability for formate production. At an operating potential of -1.1 V vs. RHE in 0.1 mol L-1 KHCO3 electrolyte, the ECR catalyzed by Bi-BDC-120 °C achieved a Faraday efficiency (FE) of 97.2% towards formate generation, and the total current density reached about 30 mA cm-2. The operating potential window with FEformate values > 95% ranged in -0.9 to -1.5 V vs. RHE. The density-functional theory (DFT) calculation demonstrated that the (001) crystalline planes of Bi-BDC are preferable for the adsorption of CO2 and the conversion of *OCHO intermediates, thus ultimately promoting the electrocatalytic production of formate. Although the MOF structure of Bi-BDC-120 °C was insufficiently stabilized, the FEformate could be maintained at around 90% after 36 h of ECR operation. The long-term durability for formate production was attributed to the fact that the in situ reconstructed Bi2O2CO3 could retain the Bi-O active sites in the structure. These results offer an opportunity to design CO2 reduction electrocatalysts with high activity and selectivity for potential applications.

Kinetic Understanding of Catalytic Selectivity and Product Distribution of Electrochemical Carbon Dioxide Reduction Reaction

CO₂ can be electrochemically reduced to different products depending on the nature of catalysts. In this work, we report comprehensive kinetic studies on catalytic selectivity and product distribution of the CO₂ reduction reaction on various metal surfaces. The influences on reaction kinetics can be clearly analyzed from the variation of reaction driving force (binding energy difference) and reaction resistance (reorganization energy). Moreover, the CO₂RR product distributions are further affected by external factors such as electrode potential and solution pH. A potential-mediated mechanism is found to determine the competing two-electron reduction products of CO₂ that shifts from thermodynamics-controlled product formic acid at less negative electrode potentials to kinetic-controlled product CO at more negative electrode potentials. Based on detailed kinetic simulations, a three-parameter descriptor is applied to identify the catalytic selectivity of CO, formate, hydrocarbons/alcohols, as well as side product H₂. The present kinetic study not only well explains the catalytic selectivity and product distribution of experimental results but also provides a fast way for catalyst screening.

Recent Progress in Surface-Defect Engineering Strategies for Electrocatalysts toward Electrochemical CO2 Reduction: A Review

Climate change, caused by greenhouse gas emissions, is one of the biggest threats to the world. As per the IEA report of 2021, global CO2 emissions amounted to around 31.5 Gt, which increased the atmospheric concentration of CO2 up to 412.5 ppm. Thus, there is an imperative demand for the development of new technologies to convert CO2 into value-added feedstock products such as alcohols, hydrocarbons, carbon monoxide, chemicals, and clean fuels. The intrinsic properties of the catalytic materials are the main factors influencing the efficiency of electrochemical CO2 reduction (CO2-RR) reactions. Additionally, the electroreduction of CO2 is mainly affected by poor selectivity and large overpotential requirements. However, these issues can be overcome by modifying heterogeneous electrocatalysts to control their morphology, size, crystal facets, grain boundaries, and surface defects/vacancies. This article reviews the recent progress in electrochemical CO2 reduction reactions accomplished by surface-defective electrocatalysts and identifies significant research gaps for designing highly efficient electrocatalytic materials.

Near-Unity Electrochemical CO2 to CO Conversion over Sn-Doped Copper Oxide Nanoparticles

Bimetallic electrocatalysts have emerged as a viable strategy to tune the electrocatalytic CO₂ reduction reaction (eCO₂RR) for the selective production of valuable base chemicals and fuels. However, obtaining high product selectivity and catalyst stability remain challenging, which hinders the practical application of eCO₂RR. In this work, it was found that a small doping concentration of tin (Sn) in copper oxide (CuO) has profound influence on the catalytic performance, boosting the Faradaic efficiency (FE) up to 98% for carbon monoxide (CO) at -0.75 V versus RHE, with prolonged stable performance (FE > 90%) for up to 15 h. Through a combination of ex situ and in situ characterization techniques, the in situ activation and reaction mechanism of the electrocatalyst at work was elucidated. In situ Raman spectroscopy measurements revealed that the binding energy of the crucial adsorbed *CO intermediate was lowered through Sn doping, thereby favoring gaseous CO desorption. This observation was confirmed by density functional theory, which further indicated that hydrogen adsorption and subsequent hydrogen evolution were hampered on the Sn-doped electrocatalysts, resulting in boosted CO formation. It was found that the pristine electrocatalysts consisted of CuO nanoparticles decorated with SnO₂ domains, as characterized by ex situ high-resolution scanning transmission electron microscopy and X-ray photoelectron spectroscopy measurements. These pristine nanoparticles were subsequently in situ converted into a catalytically active bimetallic Sn-doped Cu phase. Our work sheds light on the intimate relationship between the bimetallic structure and catalytic behavior, resulting in stable and selective oxide-derived Sn-doped Cu electrocatalysts.

Waste-Derived Copper-Lead Electrocatalysts for CO2 Reduction

It remains a real challenge to control the selectivity of the electrocatalytic CO2 reduction (eCO2R) reaction to valuable chemicals and fuels. Most of the electrocatalysts are made of non-renewable metal resources, which hampers their large-scale implementation. Here, we report the preparation of bimetallic copper-lead (CuPb) electrocatalysts from industrial metallurgical waste. The metal ions were extracted from the metallurgical waste through simple chemical treatment with ammonium chloride, and CuxPby electrocatalysts with tunable compositions were fabricated through electrodeposition at varying cathodic potentials. X-ray spectroscopy techniques showed that the pristine electrocatalysts consist of Cu0, Cu1+ and Pb2+ domains, and no evidence for alloy formation was found. We found a volcano-shape relationship between eCO2R selectivity toward two electron products, such as CO, and the elemental ratio of Cu and Pb. A maximum Faradaic efficiency towards CO was found for Cu9.00Pb1.00, which was four times higher than that of pure Cu, under the same electrocatalytic conditions. In situ Raman spectroscopy revealed that the optimal amount of Pb effectively improved the reducibility of the pristine Cu1+ and Pb2+ domains to metallic Cu and Pb, which boosted the selectivity towards CO by synergistic effects. This work provides a framework of thinking to design and tune the selectivity of bimetallic electrocatalysts for CO2 reduction through valorization of metallurgical waste.

SrO-layer insertion in Ruddlesden-Popper Sn-based perovskite enables efficient CO2 electroreduction towards formate

Tin (Sn)-based oxides have been proved to be promising catalysts for the electrochemical CO2 reduction reaction (CO2RR) to formate (HCOO-). However, their performance is limited by their reductive transformation into metallic derivatives during the cathodic reaction. This paper describes the catalytic chemistry of a Sr2SnO4 electrocatalyst with a Ruddlesden-Popper (RP) perovskite structure for the CO2RR. The Sr2SnO4 electrocatalyst exhibits a faradaic efficiency of 83.7% for HCOO- at -1.08 V vs. the reversible hydrogen electrode with stability for over 24 h. The insertion of the SrO-layer in the RP structure of Sr2SnO4 leads to a change in the filling status of the anti-bonding orbitals of the Sn active sites, which optimizes the binding energy of *OCHO and results in high selectivity for HCOO-. At the same time, the interlayer interaction between interfacial octahedral layers and the SrO-layers makes the crystalline structure stable during the CO2RR. This study would provide fundamental guidelines for the exploration of perovskite-based electrocatalysts to achieve consistently high selectivity in the CO2RR.

Using Light and Electrons to Bend Carbon Dioxide: Developing and Understanding Catalysts for CO2 Conversion to Fuels and Feedstocks

Our global society generates an unwieldy amount of CO₂ per unit time. Therefore, the capture of this greenhouse gas must involve a diverse set of strategies. One solution to this problem is the conversion of CO₂ into a more useful chemical species. Again, a multiplicity of syntheses and products will be necessary. No matter how elegant the chemistry is, commercial markets often have little use for a small set of compounds made in tremendous yield. Following this reasoning, the Bocarsly Research Group seeks to develop new electrochemical and photochemical processes that may be of utility in the conversion of CO₂ to organic compounds. We focus on investigating proton-coupled charge transfer mechanisms that produce both C1 and carbon-carbon bonded products (C2+).In early work, we considered the reduction of CO₂ to formate at electrocatalytic indium and tin electrodes. These studies demonstrated the key role of surface oxides in catalyzing the reduction of CO₂. This work generated efficient systems for the formation of formate and paved the way to studies using non-copper, intermetallic electrocatalysts for the generation of C2+ species. Most notable is the efficient formation of oxalate at an oxidized Cr₃Ga electrode. Oxalate has recently been suggested as a potential nonfossil, alternate organic feedstock.Separately, we have focused on the electrocatalytic effects of pyridine on the reduction of CO₂ in aqueous electrolyte. These studies demonstrated that electrodes that normally yield a low hydrogen overpotential (Pd and Pt) show suppressed H₂ evolution and strongly enhanced activity for CO₂ reduction in the presence of pyridinium. Methanol was observed to form in high Faradaic yield at low overpotential using this system. The 6-electron, 6-proton reduction of CO₂ in the presence of pyridinium was intriguing, and significant effort was placed on understanding the mechanism of this reaction both on metal electrodes and on semiconducting photocathodes. P-GaP electrodes were found to provide exceptional behavior for the formation of methanol using only light as the energy source.The pyridinium studies highlighted the role of protons in the overall reduction of CO₂, stimulating our interest in the chemistry of MnBr(bpy)(CO)₃ and related compounds. This complex was reported to electrochemically reduce CO₂ to CO. We saw these reports as an opportunity to study the detailed nature of the proton-coupled electron transfer (PCET) mechanism associated with CO₂ reduction. Our investigation of this system revealed the role of hydrogen-bonding in CO₂ reduction and pointed the way for the construction of a photochemical process for CO generation using a [(bpy)(CO)₃Mn(CN)Mn(bpy)(CO)₃]⁺ photocatalyst.Based on our studies to date, it appears likely that heterogeneous systems can be assembled to convert CO₂ into products that are "beyond C2 products." This may open up new practical chemistry in the area of fossil-based replacements for both synthesis and fuels. Systems with pragmatic efficiencies are close to reality. Electrochemical reactors using heterogeneous electrocatalysts show the stability and product selectivity needed to generate industrial opportunities. Continued growth of mechanistic understanding is expected to facilitate the chemical design of cogent systems for the taming of CO₂.

Highly efficient and stable indium single-atom catalysts for electrocatalytic reduction of CO2 to formate

Indium single-atom catalysts display a large total current density (38.94 to 81.08 mA cm^-2) over an extensive potential window (-0.91 to -1.41 V vs. RHE) for electrocatalytic CO₂ reduction to formate with high selectivity (85.2% faradaic efficiency at -1.31 V).

Transient Effects Caused by Gas Depletion during Carbon Dioxide Electroreduction

The novel use of carbon dioxide (CO₂) electroreduction to generate carbon-based products which do not contribute to the greenhouse effect has promoted the vision of carbon dioxide as a renewable feedstock for future clean fuel production. Depending on the material choice for the electrocatalysis, a certain variety of products is expected from the carbon dioxide reduction reaction (CO2RR). However, as the CO₂ concentration in areas close to the working electrode (relative to the diffusive boundary layer) decreases as it is being consumed and transformed into other products, the generation of H₂ is favored to the detriment of CO₂ electroreduction. Therefore, the extent to which H₂ is produced can be used as a metric to evaluate the efficiency of CO2RR. This article proposes a model that accounts for the modes in which aqueous gas depletion evolves over time and affects the long-term CO₂ electroreduction and the corresponding pH evolution near the electrode's surface. For the latter, two main contributions are distinguished: gas depletion due to CO₂ consumption and ion generation in areas close to the electrocatalyst surface. pH is then suggested as an accurate and indirect means to measure CO₂ concentration in a liquid electrolyte. We conclude that CO₂ depletion causes a strong decay in the electrochemical reaction efficiency. In the end, we discuss several methods which may delay the onset of the adverse effects caused by gas depletion, such as the utilization of pulsed electroreduction, cycling the applied current to electrodes on and off periodically.

Formic acid generating in-situ H2 and CO2 for nitrite reduction in aqueous phase

The aim of this work is to explore and to understand the effect of pH, concentrations and presence of oxygen traces on reduction nitrite in drinking water with Pd/γ-Al2O3, using...

Versatile Tools for Understanding Electrosynthetic Mechanisms

Electrosynthesis is a popular, green alternative to traditional organic methods. Understanding the mechanisms is not trivial yet is necessary to optimize reaction processes. To this end, a multitude of analytical tools is available to identify and quantitate reaction products and intermediates. The first portion of this review serves as a guide that underscores electrosynthesis fundamentals, including instrumentation, electrode selection, impacts of electrolyte and solvent, cell configuration, and methods of electrosynthesis. Next, the broad base of analytical techniques that aid in mechanism elucidation are covered in detail. These methods are divided into electrochemical, spectroscopic, chromatographic, microscopic, and computational. Technique selection is dependent on predicted reaction pathways and electrogenerated intermediates. Often, a combination of techniques must be utilized to ensure accuracy of the proposed model. To conclude, future prospects that aim to enhance the field are discussed.

A Facile Strategy for Constructing a Carbon-Particle-Modified Metal-Organic Framework for Enhancing the Efficiency of CO2 Electroreduction into Formate

Electrocatalytic reduction of CO₂ by metal-organic frameworks (MOFs) has been widely investigated, but insufficient conductivity limits application. Herein, a porous 3D In-MOF {(Me₂ NH₂ )[In(BCP)]⋅2 DMF}_n (V11) with good stability was constructed with two types of channels (1.6 and 1.2 nm diameter). V11 exhibits moderate catalytic activity in CO₂ electroreduction with 76.0 % of Faradaic efficiency for formate (FE_HCOO- ). Methylene blue molecules of suitable size and pyrolysis temperature were introduced and transformed into carbon particles (CPs) after calcination. The performance of the obtained CPs@V11 is significantly improved both in FE_HCOO- (from 76.0 % to 90.1 %) and current density (2.2 times). Control experiments show that introduced CPs serve as accelerant to promote the charges and mass transfer in framework, and benefit to sufficiently expose active sites. This strategy can also work on other In-MOFs, demonstrating the universality of this method for electroreduction of CO₂ .

In Situ Characterization for Boosting Electrocatalytic Carbon Dioxide Reduction

The electrocatalytic reduction of carbon dioxide into organic fuels and feedstocks is a fascinating method to implement the sustainable carbon cycle. Thus, a rational design of advanced electrocatalysts and a deep understanding of reaction mechanisms are crucial for the complex reactions of carbon dioxide reduction with multiple electron transfer. In situ and operando techniques with real-time monitoring are important to obtain deep insight into the electrocatalytic reaction to reveal the dynamic evolution of electrocatalysts' structure and composition under experimental conditions. In this paper, the reaction pathways for the CO₂ reduction reaction (CO₂ RR) in the generation of various products (e.g., C₁ and C₂ ) via the proposed mechanisms are introduced. Moreover, recent advances in the development and applications of in situ and operando characterization techniques, from the basic working principles and in situ cell structure to detailed applications are discussed. Suggestions and future directions of in situ/operando analysis are also addressed.

Mechanistic insights into the spontaneous reaction between CO2 and La2–xSrxCuO4

Layered perovskites such as La2–xSrxCuO4 are active electrocatalysts for CO2 reduction, but they suffer from structural instability under catalytic conditions. This structural instability is found to arise from the reaction of CO2 with surface sites. Variable scan rate voltammetry shows the growth of a Cu-based redox couple when potentials cathodic of 0.6 V vs. RHE are applied in the presence of CO2. Electrochemical impedance spectroscopy identifies a redox active surface state at this voltage, whose concentration is increased by electrochemical reduction in the presence of CO2. In situ spectroelectrochemical FTIR identifies surface bound carbonates as being involved in the formation of these surface sites. The orthorhombic lattice for La2CuO4 is found to uniquely enable binding bidentate binding of carbonate ions to the surface through reaction with CO2. The incorporation of Sr(II) induces a transition to a tetragonal lattice, for which only monodentate carbonate ions are observed. It is proposed that the binding of carbonate ions in a bidentate fashion generates sufficient strain at the surface to result in amorphization at the surface, yielding the observed Cu(II)/Cu(I) redox couple.

A simple method to calculate solution-phase free energies of charged species in computational electrocatalysis

Determining the adsorption potential of adsorbed ions in the field of computational electrocatalysis is of great interest to study their interaction with the electrode material and the solvent, and to map out surface phase diagrams and reaction pathways. Calculating the adsorption potentials of ions with density functional theory and comparing across various ions requires an accurate reference energy of the ion in solution and electrons at the same electrochemical scale. Here we highlight a previously used method for determining the reference free energy of solution phase ions using a simple electrochemical thermodynamic cycle, which allows this free energy to be calculated from that of a neutral gas-phase or solid species and an experimentally measured equilibrium potential, avoiding the need to model solvent around the solution phase ion in the electronic structure calculations. While this method is not new, we describe its use and utility in detail and show that this same method can be used to find the free energy of any ion from any reaction, as long as the half-cell equilibrium potential is known, even for reactions that do not transfer the same number of protons and electrons. To illustrate its usability, we compare the adsorption potentials obtained with DFT of I^*, Br^*, Cl^*, and SO₄^*on Pt(111) and Au(111) and OH^*and Ag^*on Pt(111) with those measured experimentally and find that this simple and computationally affordable method reproduces the experimental trends.

Engineering the atomic arrangement of bimetallic catalysts for electrochemical CO2 reduction

The electrochemical CO2 reduction reaction (CO2RR) to form highly valued chemicals is a sustainable solution to address the environmental issues caused by excessive CO2 emissions. Generally, it is challenging to achieve high efficiency and selectivity simultaneously in the CO2RR due to multi-proton/electron transfer processes and complex reaction intermediates. Among the studied formulations, bimetallic catalysts have attracted significant attention with promising activity, selectivity, and stability. Engineering the atomic arrangement of bimetallic nanocatalysts is a promising strategy for the rational design of structures (intermetallic, core/shell, and phase-separated structures) to improve catalytic performance. This review summarizes the recent advances, challenges, and opportunities in developing bimetallic catalysts for the CO2RR. In particular, we firstly introduce the possible reaction pathways on bimetallic catalysts concerning the geometric and electronic properties of intermetallic, core/shell, and phase-separated structures at the atomic level. Then, we critically examine recent advances in crystalline structure engineering for bimetallic catalysts, aiming to establish the correlations between structures and catalytic properties. Finally, we provide a perspective on future research directions, emphasizing current challenges and opportunities.

Boosting thermo-photocatalytic CO2 conversion activity by using photosynthesis-inspired electron-proton-transfer mediators

Natural photosynthesis proceeded by sequential water splitting and CO2 reduction reactions is an efficient strategy for CO2 conversion. Here, mimicking photosynthesis to boost CO2-to-CO conversion is achieved by using plasmonic Bi as an electron-proton-transfer mediator. Electroreduction of H2O with a Bi electrode simultaneously produces O2 and hydrogen-stored Bi (Bi-Hx). The obtained Bi-Hx is subsequently used to generate electron-proton pairs under light irradiation to reduce CO2 to CO; meanwhile, Bi-Hx recovers to Bi, completing the catalytic cycle. This two-step strategy avoids O2 separation and enables a CO production efficiency of 283.8 μmol g-1 h-1 without sacrificial reagents and cocatalysts, which is 9 times that on pristine Bi in H2 gas. Theoretical/experimental studies confirm that such excellent activity is attributed to the formed Bi-Hx intermediate that improves charge separation and reduces reaction barriers in CO2 reduction.

Scanning electrochemical microscopy screening of CO2 electroreduction activities and product selectivities of catalyst arrays

The electroreduction of CO₂ is one of the most investigated reactions and involves testing a large number and variety of catalysts. The majority of experimental electrocatalysis studies use conventional one-sample-at-a-time methods without providing spatially resolved catalytic activity information. Herein, we present the application of scanning electrochemical microscopy (SECM) for simultaneous screening of different catalysts forming an array. We demonstrate the potential of this method for electrocatalytic assessment of an array consisting of three Sn/SnO_x catalysts for CO₂ reduction to formate (CO2RF). Simultaneous SECM scans with fast scan (1 V s^-1) cyclic voltammetry detection of products (HCOO^-, CO and H₂) at the Pt ultramicroelectrode tip were performed. We were able to consistently distinguish the electrocatalytic activities of the three compositionally and morphologically different Sn/SnO_x catalysts. Further development of this technique for larger catalyst arrays and matrices coupled with machine learning based algorithms could greatly accelerate the CO₂ electroreduction catalyst discovery.

Defective Indium/Indium Oxide Heterostructures for Highly Selective Carbon Dioxide Electrocatalysis

Electrochemical CO₂ reduction to fuels and chemicals is a promising approach for CO₂ utilization. Developing highly active, selective, and cost-effective electrocatalysts is the key to the large-scale application of this technology. Here, we report that defective indium/indium oxide heterostructures selectively catalyze CO₂ electroreduction into C₁ products in a broad potential range from -0.7 to -1.2 V vs RHE in aqueous media with the faradaic efficiency approaching 100%. This electrocatalyst enables an efficient CO₂-to-formate conversion with excellent selectivity (up to 93%), activity (up to 50.8 mA cm^-2), and durability (>25 h). The collaboration between metallic In and In oxide of the heterostructures attributes to the boosted electrochemical CO₂ reduction: Metallic In mainly facilitates formate production, while In oxide suppresses the competing hydrogen evolution reaction. This study highlights the integration of different functional components/defects into heterostructures as an effective strategy for enhancing CO₂ electrocatalysis.

Surface Nitrogen-Injection Engineering for High Formation Rate of CO2 Reduction to Formate

In this study, we highlight that surface nitrogen-injection engineering brings a high formation rate for CO₂ reduction to formate, which is high level among the reported electrocatalysts. Surface nitrogen-injection engineering can increase the amounts of active sites and optimize the electronic structure simultaneously. Taking an example of SnS₂ precursors, the final-obtained surface N-enriched Sn(S) nanosheets (denoted as N-Sn(S) nanosheets) exhibit a 5-fold of current density and 2.45-fold of Faradaic efficiency than pristine SnS₂ derived Sn(S) nanosheets (denoted as Sn(S) nanosheets). On account of high activity and selectivity, the formation rate of formate is 14 times than that of pristine samples and reaches up to 1358 μmol h^-1 cm^-2. Moreover, this strategy is proven to be general to other metal sulfides, such as CuS and In₂S₃. We anticipate that surface nitrogen-injection engineering offers new avenues to rational design of advanced electrocatalysts for CO₂ reduction reaction.

Mechanisms of Plutonium Redox Reactions in Nitric Acid Solutions

Plutonium (Pu) exhibits a complex redox behavior in aqueous solutions. This is due to the ability of the element to adapt a wide range of oxidation states typically from +3 to +6 and the tendency for dynamic interconversion between the oxidation states that primarily depend upon acid concentration and presence of coordinating ligands. This work interrogates the Pu redox behavior in aqueous nitric acid via a combination of voltammetry and in situ vis-NIR spectroelectrochemistry under controlled potentials to map the interconversion between the various Pu oxidation states. The NIR-spectroelectrochemistry studies used to complement the visible spectroscopy bring a new and more complete perspective into the plutonium redox transformations. This allows elucidation of the mechanisms of the involved redox reactions facilitating an in-depth understanding of the relative stability of the Pu oxidation states as a function of redox potentials and nitric acid concentrations. It is observed that oxidation of Pu(III) results in generation of Pu(IV) and Pu(VI) (the latter as PuO₂²⁺), bypassing the Pu(V) oxidation state. Further, with increasing acid concentrations, the formation of the Pu(VI) species progressively decreases so that the dynamic equilibrium between the Pu(III) and Pu(IV) oxidation states dominates. These findings have significant implications for developing separation processes for used nuclear fuel reprocessing and treatment.

In Situ Spectroscopic Methods for Electrocatalytic CO2 Reduction

Electrochemical reduction of CO2 to value-added chemicals and fuels is a promising approach to store renewable energy while closing the anthropogenic carbon cycle. Despite significant advances in developing new electrocatalysts, this system still lacks enough energy conversion efficiency to become a viable technology for industrial applications. To develop an active and selective electrocatalyst and engineer the reaction environment to achieve high energy conversion efficiency, we need to improve our knowledge of the reaction mechanism and material structure under reaction conditions. In situ spectroscopies are among the most powerful tools which enable measurements of the system under real conditions. These methods provide information about reaction intermediates and possible reaction pathways, electrocatalyst structure and active sites, as well as the effect of the reaction environment on products distribution. This review aims to highlight the utilization of in situ spectroscopic methods that enhance our understanding of the CO2 reduction reaction. Infrared, Raman, X-ray absorption, X-ray photoelectron, and mass spectroscopies are discussed here. The critical challenges associated with current state-of-the-art systems are identified and insights on emerging prospects are discussed.