Direct Detection of Electron Transfer Reactions Underpinning the Tin-Catalyzed Electrochemical Reduction of CO2 using Fourier-Transformed ac Voltammetry

Highly Stable Layered Coordination Polymer Electrocatalyst toward Efficient CO2 -to-CH4 Conversion

Cu2+ -based materials, a class of promising catalysts for the electrocatalytic carbon dioxide reduction reaction (CO2 RR) to value-added chemicals, usually undergo inevitable and uncontrollable reorganization processes during the reaction, resulting in catalyst deactivation or the new active sites formation and bringing great challenges to exploring their structure-performance relationships. Herein, a facile strategy is reported for constructing Cu2+ and 3, 4-ethylenedioxythiophene (EDOT) coordination to stabilize Cu2+ ions to prepare a novel layered coordination polymer (CuPEDOT). CuPEDOT enables selective reduction of CO2 to CH4 with 62.7% Faradaic efficiency at the current density of 354 mA cm-2 in a flow cell, and the catalyst is stable for at least 15 h. In situ spectroscopic characterization and theoretical calculations reveal that CuPEDOT catalyst can maintain the Cu2+ -EDOT coordination structurally stable in CO2 RR and significantly promote the further hydrogenation of *CO intermediates, favoring the formation of CH4 instead of dimerization to C2 products. The strong coordination between EDOT and Cu2+ prevents the reduction of Cu2+ ions during CO2 RR. The finding of this work provides a new perspective on designing molecularly stable, highly active catalysts for CO2 RR.

Selective CO2 electrolysis to CO using isolated antimony alloyed copper

Renewable electricity-powered CO evolution from CO₂ emissions is a promising first step in the sustainable production of commodity chemicals, but performing electrochemical CO₂ reduction economically at scale is challenging since only noble metals, for example, gold and silver, have shown high performance for CO₂-to-CO. Cu is a potential catalyst to achieve CO₂ reduction to CO at the industrial scale, but the C-C coupling process on Cu significantly depletes CO* intermediates, thus limiting the CO evolution rate and producing many hydrocarbon and oxygenate mixtures. Herein, we tune the CO selectivity of Cu by alloying a second metal Sb into Cu, and report an antimony-copper single-atom alloy catalyst (Sb₁Cu) of isolated Sb-Cu interfaces that catalyzes the efficient conversion of CO₂-to-CO with a Faradaic efficiency over 95%. The partial current density reaches 452 mA cm^-2 with approximately 91% CO Faradaic efficiency, and negligible C₂₊ products are observed. In situ spectroscopic measurements and theoretical simulations reason that the atomic Sb-Cu interface in Cu promotes CO₂ adsorption/activation and weakens the binding strength of CO*, which ends up with enhanced CO selectivity and production rates.

Natural oxidase-mimicking copper-organic frameworks for targeted identification of ascorbate in sensitive sweat sensing

Sweat sensors play a significant role in personalized healthcare by dynamically monitoring biochemical markers to detect individual physiological status. The specific response to the target biomolecules usually depends on natural oxidase, but it is susceptible to external interference. In this work, we report tryptophan- and histidine-treated copper metal-organic frameworks (Cu-MOFs). This amino-functionalized copper-organic framework shows highly selective activity for ascorbate oxidation and can serve as an efficient ascorbate oxidase-mimicking material in sensitive sweat sensors. Experiments and calculation results elucidate that the introduced tryptophan/histidine fundamentally regulates the adsorption behaviors of biomolecules, enabling ascorbate to be selectively captured from complex sweat and further efficiently electrooxidized. This work provides not only a paradigm for specifically sweat sensing but also a significant understanding of natural oxidase-inspired MOF nanoenzymes for sensing technologies and beyond.

Preparation of C3N4 Thin Films for Photo-/Electrocatalytic CO2 Reduction to Produce Liquid Hydrocarbons

Thermal vapor condensation of melamine at various temperatures was used to fabricate thin graphitic carbon nitride (g-C3N4) films on fluorine-doped tin oxide (FTO) coated glass substrates. Photoanodic (n-type) and photocathodic (p-type) responses were observed simultaneously in the g-C3N4 films. The g-C3N4 film formed at 520 °C with the longest average lifetime of the photo-excited electrons shows the best cathodic photocurrent performance, which was then chosen for electrochemical and photoelectrochemical reduction of CO2. When the basic electrolyte (CO2-saturated 0.5 M KHCO3, pH = 7.6) was adopted, CO2 was electrochemically converted into formaldehyde ((54.6 μM/h)) in the liquid product. When the acidic electrolyte (CO2-saturated 0.5 M KCl, pH = 4.1) was adopted, formaldehyde (39.5 μM/h) and ethanol (15.7 μM/h) were generated through photoelectrochemical reduction, stimulated by the presence of sufficient protons from the electrolyte in the reduction process. Therefore, the pure g-C3N4 film has a great potential for CO2 reduction to value-added liquid hydrocarbons products via electrochemical or photoelectrochemical ways.

Alloying strategies for tuning product selectivity during electrochemical CO2 reduction over Cu

Excessive reliance on fossil fuels has led to the release and accumulation of large quantities of CO₂ into the atmosphere which has raised serious concerns related to environmental pollution and global warming. One way to mitigate this problem is to electrochemically recycle CO₂ to value-added chemicals or fuels using electricity from renewable energy sources. Cu is the only metallic electrocatalyst that has been shown to produce a wide range of industrially important chemicals at appreciable rates. However, low product selectivity is a fundamental issue limiting commercial applications of electrochemical CO₂ reduction over Cu catalysts. Combining copper with other metals that actively contribute to the electrochemical CO₂ reduction reaction process can selectively facilitate generation of desirable products. Alloying Cu can alter surface binding strength through electronic and geometric effects, enhancing the availability of surface confined carbon species, and stabilising key reduction intermediates. As a result, significant research has been undertaken to design and fabricate copper-based alloy catalysts with structures that can enhance the selectivity of targeted products. In this article, progress with use of alloying strategies for development of Cu-alloy catalysts are reviewed. Challenges in achieving high selectivity and possible future directions for development of new copper-based alloy catalysts are considered.

Aligned InS Nanorods for Efficient Electrocatalytic Carbon Dioxide Reduction

Electrochemical CO₂ reduction technology can combine renewable energy sources with carbon capture and storage to convert CO₂ into industrial chemicals. However, the catalytic activity under high current density and long-term electrocatalysis process may deteriorate due to agglomeration, catalytic polymerization, element dissolution, and phase change of active substances. Here, we report a scalable and facile method to fabricate aligned InS nanorods by chemical dealloying. The resulting aligned InS nanorods exhibit a remarkable CO₂RR activity for selective formate production at a wide potential window, achieving over 90% faradic efficiencies from -0.5 to -1.0 V vs reversible hydrogen electrode (RHE) under gas diffusion cell, as well as continuously long-term operation without deterioration. In situ electrochemical Raman spectroscopy measurements reveal that the *OCHO* species (Bidentate adsorption) are the intermediates that occurred in the reaction of CO₂ reduction to formate. Meanwhile, the presence of sulfur can accelerate the activation of H₂O to react with CO₂, promoting the formation of *OCHO* intermediates on the catalyst surface. Significantly, through additional coupling anodic methanol oxidation reaction (MOR), the unusual two-electrode electrolytic system allows highly energy-efficient and value-added formate manufacturing, thereby reducing energy consumption.

Unraveling the rate-limiting step of two-electron transfer electrochemical reduction of carbon dioxide

Electrochemical reduction of CO₂ (CO₂ER) has received significant attention due to its potential to sustainably produce valuable fuels and chemicals. However, the reaction mechanism is still not well understood. One vital debate is whether the rate-limiting step (RLS) is dominated by the availability of protons, the conversion of water molecules, or the adsorption of CO₂. This paper describes insights into the RLS by investigating pH dependency and kinetic isotope effect with respect to the rate expression of CO₂ER. Focusing on electrocatalysts geared towards two-electron transfer reactions, we find the generation rates of CO and formate to be invariant with either pH or deuteration of the electrolyte over Au, Ag, Sn, and In. We elucidate the RLS of two-electron transfer CO₂ER to be the adsorption of CO₂ onto the surface of electrocatalysts. We expect this finding to provide guidance for improving CO₂ER activity through the enhancement of the CO₂ adsorption processes by strategies such as surface modification of catalysts as well as careful control of pressure and interfacial electric field within reactors.

Electroreduction of CO₂ is heavily investigated but its reaction mechanism needs to be further explored. Here, the authors investigate pH dependency and kinetic isotope effect with respect to the rate expression of CO₂ electroreduction to gain further insights into the rate-limiting step.

Advanced Spatiotemporal Voltammetric Techniques for Kinetic Analysis and Active Site Determination in the Electrochemical Reduction of CO2

ConspectusElectrochemical reduction of the greenhouse gas CO₂ offers prospects for the sustainable generation of fuels and industrially useful chemicals when powered by renewable electricity. However, this electrochemical process requires the use of highly stable, selective, and active catalysts. The development of such catalysts should be based on a detailed kinetic and mechanistic understanding of the electrochemical CO₂ reduction reaction (eCO₂RR), ideally through the resolution of active catalytic sites in both time (i.e., temporally) and space (i.e., spatially). In this Account, we highlight two advanced spatiotemporal voltammetric techniques for electrocatalytic studies and describe the considerable insights they provide on the eCO₂RR. First, Fourier transformed large-amplitude alternating current voltammetry (FT ac voltammetry), as applied by the Monash Electrochemistry Group, enables the resolution of rapid underlying electron-transfer processes in complex reactions, free from competing processes, such as the background double-layer charging current, slow catalytic reactions, and solvent/electrolyte electrolysis, which often mask conventional voltammetric measurements of the eCO₂RR. Crucially, FT ac voltammetry allows details of the catalytically active sites or the rate-determining step to be revealed under catalytic turnover conditions. This is well illustrated in investigations of the eCO₂RR catalyzed by Bi where formate is the main product. Second, developments in scanning electrochemical cell microscopy (SECCM) by the Warwick Electrochemistry and Interfaces Group provide powerful methods for obtaining high-resolution activity maps and potentiodynamic movies of the heterogeneous surface of a catalyst. For example, by coupling SECCM data with colocated microscopy from electron backscatter diffraction (EBSD) or atomic force microscopy, it is possible to develop compelling correlations of (precatalyst) structure-activity at the nanoscale level. This correlative electrochemical multimicroscopy strategy allows the catalytically more active region of a catalyst, such as the edge plane of two-dimensional materials and the grain boundaries between facets in a polycrystalline metal, to be highlighted. The attributes of SECCM-EBSD are well-illustrated by detailed studies of the eCO₂RR on polycrystalline gold, where carbon monoxide is the main product. Comparing SECCM maps and movies with EBSD images of the same region reveals unambiguously that the eCO₂RR is enhanced at surface-terminating dislocations, which accumulate at grain boundaries and slip bands. Both FT ac voltammetry and SECCM techniques greatly enhance our understanding of the eCO₂RR, significantly boosting the electrochemical toolbox and the information available for the development and testing of theoretical models and rational catalyst design. In the future, it may be possible to further enhance insights provided by both techniques through their integration with in situ and in operando spectroscopy and microscopy methods.

Highly Selective Tandem Electroreduction of CO2 to Ethylene over Atomically Isolated Nickel-Nitrogen Site/Copper Nanoparticle Catalysts

Herein, an effective tandem catalysis strategy is developed to improve the selectivity of the CO₂ RR towards C₂ H₄ by multiple distinct catalytic sites in local vicinity. An earth-abundant elements-based tandem electrocatalyst PTF(Ni)/Cu is constructed by uniformly dispersing Cu nanoparticles (NPs) on the porphyrinic triazine framework anchored with atomically isolated nickel-nitrogen sites (PTF(Ni)) for the enhanced CO₂ RR to produce C₂ H₄ . The Faradaic efficiency of C₂ H₄ reaches 57.3 % at -1.1 V versus the reversible hydrogen electrode (RHE), which is about 6 times higher than the non-tandem catalyst PTF/Cu, which produces CH₄ as the major carbon product. The operando infrared spectroscopy and theoretic density functional theory (DFT) calculations reveal that the local high concentration of CO generated by PTF(Ni) sites can facilitate the C-C coupling to form C₂ H₄ on the nearby Cu NP sites. The work offers an effective avenue to design electrocatalysts for the highly selective CO₂ RR to produce multicarbon products via a tandem route.

Sn(101) Derived from Metal-Organic Frameworks for Efficient Electrocatalytic Reduction of CO2

The synthesis of a specific Sn plane as an efficient electrocatalyst for CO₂ electrochemical reduction to generate fuels and chemicals is still a huge challenge. Density functional theory (DFT) calculations first reveal that the Sn(101) crystal plane is more advantageous for CO₂ electroreduction. A metal-organic framework (MOF) precursor Sn-MOF has been carbonized and then etched to successfully fabricate Sn(101)/SnO₂/C composites with good control of the carbonization time and the concentration of hydrochloric acid. The Sn(101) crystal plane of the catalyst could enhance the faradaic efficiency of formate to as high as 93.3% and catalytic stability up to 20 h. The promotion of the selectivity and activity by Sn(101) advances new possibilities for the rational design of high-activity Sn catalysts derived from MOFs.

Highly Efficient and Selective CO2 Electro-Reduction to HCOOH on Sn Particle-Decorated Polymeric Carbon Nitride

Electrochemical conversion of CO₂ into liquid fuels by efficient and earth-abundant catalysts is of broad interest but remains a great challenge in renewable energy production and environmental remediation. Herein, a Sn particle-decorated polymeric carbon nitride (CN) electrocatalyst was successfully developed for efficient, durable, and highly selective CO₂ reduction to formic acid. High-resolution X-ray photoelectron spectroscopy confirmed that the metallic Sn particles and CN matrix are bound by strong chemical interaction, rendering the composite catalyst a stable structure. More notably, the electronic structure of Sn was well tuned to be highly electron-rich due to the electron transfer from N atoms of CN to Sn atoms via metal-support interactions, which favored the adsorption and activation of CO₂ molecules, promoted charge transport, and thus enhanced the electrochemical conversion of CO₂ . The composite electrocatalyst demonstrated an excellent Faradaic efficiency of formic acid (FE_HCOOH ) up to 96±2 % at the potential of -0.9 V vs. reversible hydrogen electrode, which remained at above 92 % during the electrochemical reaction of 10 h, indicating that the present Sn particle-decorated polymeric carbon nitride electrocatalyst is among the best in comparison with reported Sn-based electrocatalysts.

CO2 electrolysis to multicarbon products at activities greater than 1 A cm-2

Electrolysis offers an attractive route to upgrade greenhouse gases such as carbon dioxide (CO₂) to valuable fuels and feedstocks; however, productivity is often limited by gas diffusion through a liquid electrolyte to the surface of the catalyst. Here, we present a catalyst:ionomer bulk heterojunction (CIBH) architecture that decouples gas, ion, and electron transport. The CIBH comprises a metal and a superfine ionomer layer with hydrophobic and hydrophilic functionalities that extend gas and ion transport from tens of nanometers to the micrometer scale. By applying this design strategy, we achieved CO₂ electroreduction on copper in 7 M potassium hydroxide electrolyte (pH ≈ 15) with an ethylene partial current density of 1.3 amperes per square centimeter at 45% cathodic energy efficiency.

On the Mechanism of Carbon Dioxide Reduction on Sn-Based Electrodes: Insights into the Role of Oxide Surfaces

The electrochemical reduction of carbon dioxide into carbon monoxide, hydrocarbons and formic acid has offered an interesting alternative for a sustainable energy scenario. In this context, Sn-based electrodes have attracted a great deal of attention because they present low price and toxicity, as well as high faradaic efficiency (FE) for formic acid (or formate) production at relatively low overpotentials. In this work, we investigate the role of tin oxide surfaces on Sn-based electrodes for carbon dioxide reduction into formate by means of experimental and theoretical methods. Cyclic voltammetry measurements of Sn-based electrodes, with different initial degree of oxidation, result in similar onset potentials for the CO2 reduction to formate, ca. −0.8 to −0.9 V vs. reversible hydrogen electrode (RHE), with faradaic efficiencies of about 90–92% at −1.25 V (vs. RHE). These results indicate that under in-situ conditions, the electrode surfaces might converge to very similar structures, with partially reduced or metastable Sn oxides, which serve as active sites for the CO2 reduction. The high faradaic efficiencies of the Sn electrodes brought by the etching/air exposition procedure is ascribed to the formation of a Sn oxide layer with optimized thickness, which is persistent under in situ conditions. Such oxide layer enables the CO2 “activation”, also favoring the electron transfer during the CO2 reduction reaction due to its better electric conductivity. In order to elucidate the reaction mechanism, we have performed density functional theory calculations on different slab models starting from the bulk SnO and Sn6O4(OH)4 compounds with focus on the formation of -OH groups at the water-oxide interface. We have found that the insertion of CO2 into the Sn-OH bond is thermodynamically favorable, leading to the stabilization of the tin-carbonate species, which is subsequently reduced to produce formic acid through a proton-coupled electron transfer process. The calculated potential for CO2 reduction (E = −1.09 V vs. RHE) displays good agreement with the experimental findings and, therefore, support the CO2 insertion onto Sn-oxide as a plausible mechanism for the CO2 reduction in the potential domain where metastable oxides are still present on the Sn surface. These results not only rationalize a number of literature divergent reports but also provide a guideline for the design of efficient CO2 reduction electrocatalysts.

Cathodized copper porphyrin metal-organic framework nanosheets for selective formate and acetate production from CO2 electroreduction

An efficient and selective Cu catalyst for CO2 electroreduction is highly desirable since current catalysts suffer from poor selectivity towards a series of products, such as alkenes, alcohols, and carboxylic acids. Here, we used copper(ii) paddle wheel cluster-based porphyrinic metal-organic framework (MOF) nanosheets for electrocatalytic CO2 reduction and compared them with CuO, Cu2O, Cu, a porphyrin-Cu(ii) complex and a CuO/complex composite. Among them, the cathodized Cu-MOF nanosheets exhibit significant activity for formate production with a faradaic efficiency (FE) of 68.4% at a potential of -1.55 V versus Ag/Ag+. Moreover, the C-C coupling product acetate is generated from the same catalyst together with formate at a wide voltage range of -1.40 V to -1.65 V with the total liquid product FE from 38.8% to 85.2%. High selectivity and activity are closely related to the cathodized restructuring of Cu-MOF nanosheets. With the combination of X-ray diffraction, X-ray photoelectron spectroscopy, high resolution transmission electron microscopy and Fourier transform infrared spectroscopy, we find that Cu(ii) carboxylate nodes possibly change to CuO, Cu2O and Cu4O3, which significantly catalyze CO2 to formate and acetate with synergistic enhancement from the porphyrin-Cu(ii) complex. This intriguing phenomenon provides a new opportunity for the rational design of high-performance Cu catalysts from pre-designed MOFs.

2D Metal Oxyhalide-Derived Catalysts for Efficient CO2 Electroreduction

Electrochemical reduction of CO₂ is a compelling route to store renewable electricity in the form of carbon-based fuels. Efficient electrochemical reduction of CO₂ requires catalysts that combine high activity, high selectivity, and low overpotential. Extensive surface reconstruction of metal catalysts under high productivity operating conditions (high current densities, reducing potentials, and variable pH) renders the realization of tailored catalysts that maximize the exposure of the most favorable facets, the number of active sites, and the oxidation state all the more challenging. Earth-abundant transition metals such as tin, bismuth, and lead have been proven stable and product-specific, but exhibit limited partial current densities. Here, a strategy that employs bismuth oxyhalides as a template from which 2D bismuth-based catalysts are derived is reported. The BiOBr-templated catalyst exhibits a preferential exposure of highly active Bi ( 11¯0 ) facets. Thereby, the CO₂ reduction reaction selectivity is increased to over 90% Faradaic efficiency and simultaneously stable current densities of up to 200 mA cm^-2 are achieved-more than a twofold increase in the production of the energy-storage liquid formic acid compared to previous best Bi catalysts.

Identification of a new substrate effect that enhances the electrocatalytic activity of dendritic tin in CO2 reduction

A Sn electrocatalyst for CO₂ reduction to formate with enhanced selectivity has been developed based on a new substrate effect.

Metal-based heterogeneous electrocatalysts for reduction of carbon dioxide and nitrogen: mechanisms, recent advances and perspective

Recent progress in the development of metal-based heterogeneous electrocatalysts which have been used in the electrochemical reduction of carbon dioxide and nitrogen with superior performance is comprehensively and critically reviewed.