Beyond Ordered Materials: Understanding Catalytic Sites on Amorphous Solids

Influence of Nitrogen-Doped Carbon Dots on H• Radical-Mediated Au-H Formation in the Hydrogenation of 4-Nitrophenol Using NCDs-Au Nanohybrids

The hydrogenation of 4-nitrophenol using carbon dot-stabilized gold (Au) nanoparticles is well-studied, with Au-H species known to catalyze the reaction. However, the impact of specific nitrogen moieties in nitrogen-doped carbon dots on Au-H formation and catalytic activity remains unexplored. These nitrogen species, acting as surface ligands, may influence the catalytic properties through the generation of Au-H species via H• radicals. In this regard, modulation of the catalytic properties of Au nanoparticles has been explored by conjugating their surface with nitrogen-doped carbon dots (NCDs). Three distinct nanohybrid formulations comprising NCDs and Au nanoparticles (i.e., NCDs-Au) have been prepared, where the NCDs were derived from different carbon sources (e.g., citric acid and l-malic acid) and varying mole ratios of the nitrogen source (i.e., urea). The impact of NCDs on Au nanoparticle-mediated catalysis has been investigated using the model reaction of hydrogenation of 4-nitrophenol (4-NP) in the presence of NaBH4. The fractions of different nitrogen species (such as pyrrolic, pyridinic, and amidic) in the different NCDs-Au nanohybrids were quantified through XPS analysis, and their roles in catalytic performance have been studied. Further, the size, shape, crystallinity, defects, and exposed facets of the NCDs-Au nanohybrids have also been assessed (through XRD, HRTEM, and Raman studies), and their structure-activity relationships have been corroborated. The hydrogenation of 4-NP is proposed to happen through the formation of gold-hydride (Au-H) species facilitated by H• radicals, as confirmed by EPR analysis. The NCDs-Au nanohybrid, synthesized from NCDs derived from a 1:3 molar ratio of l-malic acid and urea (MU13-Au), exhibits superior catalytic efficiency with a rate constant of 1.013 min-1, attributed to its abundant defects and a notably high relative content of catalytically favorable pyridinic nitrogen species compared to other tested nanohybrids.

Comparison of methods for the NMR measurement of motionally averaged dipolar couplings

Motionally averaged dipolar couplings are an important tool for understanding the complex dynamics of catalysts, polymers, and biomolecules. While there is a plethora of solid-state NMR pulse sequences available for their measurement, in can be difficult to gauge the methods' strengths and weaknesses. In particular, there has not been a comprehensive comparison of their performance in natural abundance samples, where 1H homonuclear dipolar couplings are important and the use of large MAS rotors may be required for sensitivity reasons. In this work, we directly compared some of the more common methods for measuring C-H dipolar couplings in natural abundance samples using L-alanine (L-Ala) and the N-formyl-L-methionyl-L-leucyl-L-phenylalanine (fMLF) tripeptide as model systems. We evaluated their performance in terms of accuracy, resolution, sensitivity, and ease of implementation. We found that, despite the presence of 1H homonuclear dipolar interactions, all methods, with the exception of REDOR, were able to yield the reasonable dipolar coupling strengths for both mobile and static moieties. Of these methods, PDLF provides the most convenient workflow and precision at the expense of low sensitivity. In low-sensitivity cases, MAS-PISEMA and DIPSHIFT appear to be the better options.

Phase Engineered CuxS-Ag2S with Photothermoelectric Activity for Enhanced Multienzyme Activity and Dynamic Therapy

The insufficient exposure sites and active site competition of multienzyme are the two main factors to hinder its therapeutic effect. Here, a phase-junction nanomaterial (amorphous-crystalline CuxS-Ag2S) is designed and prepared through a simple room temperature ion-exchange process. A small amount of Ag+ is added into Cu7S4 nanocrystals, which transforms Cu7S4 into amorphous phased CuxS and produces crystalline Ag2S simultaneously. In this structure, the overhanging bonds on the amorphous CuxS surface provide abundant active sites for optimizing the therapeutic activity. Meanwhile, the amorphous state enhances the photothermal effect through non-radiative relaxation, and due to its low thermal resistance, phase-junction CuxS-Ag2S forms a significant temperature gradient to unlock the optimized thermo-electrodynamic therapy. Furthermore, benefiting from the high asymmetry of the amorphous state, the material forms a spin-polarized state that can effectively inhibit electron-hole recombination. In this way, the thermoelectric effect can facilitate the enzyme-catalyzed cycle by providing electrons and holes, enabling an enhanced coupling of thermoelectric therapy with multienzyme activity, which induces excellent anti-tumor performance. More importantly, the catalytic process simulated by density-functional theory proves that Ag+ alleviates the burden on the Cu sites through favorable adsorption of O2 and prevents active site competition.

Research progress on the catalytic and thermal decomposition of ammonium dinitramide (ADN)

Ammonium dinitramide (NH4N(NO3)2, ADN) is regarded as a promising oxidizer due to its low signature and high specific impulse. Generally, ADN undergoes exothermic decomposition above 140 °C accompanied by the byproduct of ammonium nitrate (AN). The inevitable endothermic decomposition of AN decreases the overall heat release, and so there is a need to develop efficient catalysts to guide ADN decomposition along desired pathways with a lower decomposition temperature and higher heat release. A suitable catalyst should be able to withstand the harsh conditions in a thruster to achieve a stable thrust force, which poses a huge obstacle for manufacturing a stable and active catalyst. This review gives a comprehensive summary of the thermal and catalytic decomposition pathways of ADN for the first time, which is expected to deepen the understanding of its reaction mechanism and provide useful guidance for designing prospective catalysts toward efficient ADN decomposition.

Crystal-Phase Engineering in Heterogeneous Catalysis

The performance of a chemical reaction is critically dependent on the electronic and/or geometric structures of a material in heterogeneous catalysis. Over the past century, the Sabatier principle has already provided a conceptual framework for optimal catalyst design by adjusting the electronic structure of the catalytic material via a change in composition. Beyond composition, it is essential to recognize that the geometric atomic structures of a catalyst, encompassing terraces, edges, steps, kinks, and corners, have a substantial impact on the activity and selectivity of a chemical reaction. Crystal-phase engineering has the capacity to bring about substantial alterations in the electronic and geometric configurations of a catalyst, enabling control over coordination numbers, morphological features, and the arrangement of surface atoms. Modulating the crystallographic phase is therefore an important strategy for improving the stability, activity, and selectivity of catalytic materials. Nonetheless, a complete understanding of how the performance depends on the crystal phase of a catalyst remains elusive, primarily due to the absence of a molecular-level view of active sites across various crystal phases. In this review, we primarily focus on assessing the dependence of catalytic performance on crystal phases to elucidate the challenges and complexities inherent in heterogeneous catalysis, ultimately aiming for improved catalyst design.

Generation of Amorphous Silica Surfaces with Controlled Roughness

Amorphous silica (a-SiO2) surfaces, when grafted with select metals on the active sites of the functionalized surfaces, can act as useful heterogeneous catalysts. From a molecular modeling perspective, one challenge has been generating a-SiO2 slab models with controllable surface roughness to facilitate the study of the effect of surface morphology on the material properties. Previous computational methods either generate relatively flat surfaces or periodically corrugated surfaces that do not mimic the full range of potential surface roughness of the amorphous silica material. In this work, we present a new method, inspired by the capillary fluctuation theory of interfaces, in which rough silica slabs are generated by cleaving a bulk amorphous sample using a cleaving plane with Fourier components randomly generated from a Gaussian distribution. The width of this Gaussian distribution (and thus the degree of surface roughness) can be tuned by varying the surface roughness parameter α. Using the van Beest, Kramer, and van Santen (BKS) force field, we create a large number of silica slabs using cleaving surfaces of varying roughness (α) and using two different system sizes. These surfaces are then characterized to determine their roughness (mean-squared displacement), density profile, and ring size distribution. This analysis shows a higher concentration of surface defects (under-/overcoordinated atoms and strained rings) as the surface roughness increases. To examine the effect of the roughness on surface reactivity, we re-equilibriate a subset of these slabs using the reactive force field ReaxFF and then expose the slabs to water and observe the formation of surface silanols. We observe that the rougher surfaces exhibit higher silanol concentrations as well as bimodal acidity.

The Role of In Situ/Operando IR Spectroscopy in Unraveling Adsorbate-Induced Structural Changes in Heterogeneous Catalysis

Heterogeneous catalysts undergo thermal- and/or adsorbate-induced dynamic changes under reaction conditions, which consequently modify their catalytic behavior. Hence, it is increasingly crucial to characterize the properties of a catalyst under reaction conditions through the so-called "operando" approach. Operando IR spectroscopy is probably one of the most ubiquitous and versatile characterization methods in the field of heterogeneous catalysis, but its potential in identifying adsorbate- and thermal-induced phenomena is often overlooked in favor of other less accessible methods, such as XAS spectroscopy and high-resolution microscopy. Without detracting from these techniques, and while aware of the enormous value of a multitechnique approach, the purpose of this Review is to show that IR spectroscopy alone can provide relevant information in this field. This is done by discussing a few selected case studies from our own research experience, which belong to the categories of both "single-site"- and nanoparticle-based catalysts.

Controlled Surface Modification of Cobalt Phosphide with Sulfur Tunes Hydrogenation Catalysis

Transition metal phosphides have shown promise as catalysts for water splitting and hydrotreating, especially when a small amount of sulfur is incorporated into the phosphides. However, the effect of sulfur on catalysis is not well understood. In part, this is because conventional preparation methods of sulfur-doped transition metal phosphides lead to sulfur both inside and at the surface of the material. Here, we present an alternative method of modifying cobalt phosphide (CoP) with sulfur using molecular S-transfer reagents, namely, phosphine sulfides (SPR3). SPR3 added sulfur to the surface of CoP and using a series of SPR3 reagents having different P═S bond strengths enabled control over the amount and type of sulfur transferred. Our results show that there is a distribution of different sulfur sites possible on the CoP surface with S-binding strengths in the range of 69 to 84 kcal/mol. This provides fundamental information on how sulfur binds to an amorphous CoP surface and provides a basis to assess how number and type of sulfur on CoP influences catalysis. For the catalytic hydrogenation of cinnamaldehyde, intermediate amounts of sulfur with intermediate binding strengths at the surface of CoP were optimal. With some but not too much sulfur, CoP exhibited a higher hydrogenation productivity and a decreased formation of secondary reaction products. Our work provides important insight into the S-effect on the catalysis by transition metal phosphides and opens new avenues for catalyst design.

Application of Oxygen-Group-Based Amorphous Nanomaterials in Electrocatalytic Water Splitting

Environmentally friendly energy sources (e.g., hydrogen) require an urgent development targeting to address the problem of energy scarcity. Electrocatalytic water splitting is being explored as a convenient catalytic reaction in this context, and promising amorphous nanomaterials (ANMs) are receiving increasing attention due to their excellent catalytic properties.Oxygen group-based amorphous nanomaterials (O-ANMs) are an important component of the broad family of ANMs due to their unique amorphous structure, large number of defects, and abundant randomly oriented bonds, O-ANMs induce the generation of a larger number of active sites, which favors a better catalytic activity. Meanwhile, amorphous materials can disrupt the inherent features of conventional crystalline materials regarding electron transfer paths, resulting in higher flexibility. O-ANMs mainly include VIA elements such as oxygen, sulfur, selenium, tellurium, and other transition metals, most of which are reported to be free of noble metals and have comparable performance to commercial catalysts Pt/C or IrO2 and RuO2 in electrocatalysis. This review covers the features and reaction mechanism of O-ANMs, the synthesis strategies to prepare O-ANMs, as well as the application of O-ANMs in electrocatalytic water splitting. Last, the challenges and prospective remarks for future development in O-ANMs for electrocatalytic water splitting are concluded.

Upcycling air pollutants to fuels and chemicals via electrochemical reduction technology

The intensification of fossil fuel usage results in significant air pollution levels. Efforts have been put into developing efficient technologies capable of converting air pollution into valuable products, including fuels and valuable chemicals (e.g., CO₂ to hydrocarbon and syngas and NO_x to ammonia). Among the strategic efforts to mitigate the excessive concentration of CO₂ and NO_x pollutants in the atmosphere, the electrochemical reduction technology of CO₂ (CO₂RR) and NO_x (NO_xRR) emerges as one of the most promising approaches. It is even more attractive if CO₂RR and NO_xRR are paired with renewables to store intermittent electricity in the form of chemical feedstocks. This review provides an overview of the electrochemical reduction process to convert CO₂ to C₁ and/or C₂₊ chemicals and NO_x to ammonia (NH₃) with a focus on electrocatalysts, electrolytes, electrolyzer, and catalytic reactor designs toward highly selective electrochemical conversion of the desired products. While the attempts in these aspects are enormous, economic consideration and environmental feasibility for actual implementation are not comprehensively provided. We discuss CO₂RR and NO_xRR from the life cycle and techno-economic analyses to perceive the feasibility of the current achievements. The remaining challenges associated with the industrial implementation of electrochemical CO₂ and NO_x reduction are additionally provided.

Promoting active site renewal in heterogeneous olefin metathesis catalysts

As an atom-efficient strategy for the large-scale interconversion of olefins, heterogeneously catalysed olefin metathesis sees commercial applications in the petrochemical, polymer and speciality chemical industries1. Notably, the thermoneutral and highly selective cross-metathesis of ethylene and 2-butenes1 offers an appealing route for the on-purpose production of propylene to address the C3 shortfall caused by using shale gas as a feedstock in steam crackers2,3. However, key mechanistic details have remained ambiguous for decades, hindering process development and adversely affecting economic viability4 relative to other propylene production technologies2,5. Here, from rigorous kinetic measurements and spectroscopic studies of propylene metathesis over model and industrial WOx/SiO2 catalysts, we identify a hitherto unknown dynamic site renewal and decay cycle, mediated by proton transfers involving proximal Brønsted acidic OH groups, which operates concurrently with the classical Chauvin cycle. We show how this cycle can be manipulated using small quantities of promoter olefins to drastically increase steady-state propylene metathesis rates by up to 30-fold at 250 °C with negligible promoter consumption. The increase in activity and considerable reduction of operating temperature requirements were also observed on MoOx/SiO2 catalysts, showing that this strategy is possibly applicable to other reactions and can address major roadblocks associated with industrial metathesis processes.

Site-Averaged Ab Initio Kinetics: Importance Learning for Multistep Reactions on Amorphous Supports

Single-atom centers on amorphous supports include catalysts for polymerization, partial oxidation, metathesis, hydrogenolysis, and more. The disordered environment makes each site different, and the kinetics exponentially magnifies these differences to make ab initio site-averaged kinetics calculations extremely difficult. This work extends the importance learning algorithm for efficient and precise site-averaged kinetics estimates to ab initio calculations and multistep reaction mechanisms. Specifically, we calculate site-averaged proton transfer relaxation rates on an ensemble of cluster models representing Brønsted acid sites on silica-alumina. We include direct and water-assisted proton transfer pathways and simultaneously estimate the water adsorption and activation enthalpies for forward and backward proton transfers. We use density functional theory (DFT) to obtain a site-averaged rate, somewhat like a turnover frequency, for the proton transfer relaxation rate. Finally, we show that importance learning can provide orders-of-magnitude acceleration over standard sampling methods for site-averaged rate calculations in cases where the rate is dominated by a few highly active sites.

1H chemical shift anisotropy: a high sensitivity solid-state NMR dynamics probe for surface studies?

Dynamics play significant roles in chemistry and biochemistry-molecular motions impact both large- and small-scale chemical reactions in addition to biochemical processes. In many systems, including heterogeneous catalysts, the characterization of dynamics remains a challenge. The most common approaches involve the solid-state NMR measurement of anisotropic interactions, in particular ²H quadrupolar coupling and ¹H-X dipolar coupling, which generally require isotope enrichment. Due to the high sensitivity of ¹H NMR, ¹H chemical shift anisotropy (CSA) is a particularly enticing, and underexplored, dynamics probe. We carried out ¹H CSA and ¹H-¹³C dipolar coupling measurements in a series of model supported complexes to understand how ¹H CSA can be leveraged to gain dynamic information for heterogeneous catalysts. Mathematical descriptions are given for the dynamic averaging of the CSA tensor, and its dependence on orientation and asymmetry. The variability of the orientation of the tensor in the molecular frame, in addition to its magnitude and asymmetry, negatively impacts attempts to extract quantitative dynamic information. Nevertheless, ¹H CSA measurements can reveal useful qualitative insights into the motions of a particularly dilute site, such as from a surface species.

Direct Coupling of Methane and Carbon Dioxide on Tantalum Cluster Cations

Understanding molecular-scale reaction mechanisms is crucial for the design of modern catalysts with industrial prospect. Through joint experimental and computational studies, we investigate the direct coupling reaction of CH₄ and CO₂ , two abundant greenhouse gases, mediated by Ta_1,4 ⁺ ions to form larger oxygenated hydrocarbons. Coherent with proposed elementary steps, we expose products of CH₄ dehydrogenation [Ta_1,4 CH₂ ]⁺ to CO₂ in a ring electrode ion trap. Product analysis and reaction kinetics indicate a predisposition of the tetramers for C-O coupling with a conversion to products of CH₂ O, whereas atomic cations enable C-C coupling yielding CH₂ CO. Selected experimental findings are supported by thermodynamic computations, connecting structure, electronic properties, and catalyst function. Moreover, the study of bare Ta_1,4 ⁺ compounds indicates that methane dehydrogenation is a significant initial step in the direct coupling reaction, enabling new, yet unknown reaction pathways.

Influence of the Synthesis Protocol on the Catalytic Performance of PHI-Type Zeolites for the Dehydration of Lactic Acid

Acrylic acid is an important basic chemical and a key starting compound for a variety of consumer products. Today, acrylic acid is still produced from fossil-based propene. If acrylic acid were produced from bio-based lactic acid, this would be an important step towards sustainability. The gas-phase dehydration reaction of lactic acid to acrylic acid was performed over eight-membered ring PHI-type zeolites in the Na+ and K+-form. A few variations in the synthesis procedure of PHI-type zeolite made a big difference in the performance during the catalytic reaction due to differences in the physical and chemical properties, especially the accessibility of the pores. The catalysts were characterized with ICP-OES, XRD, CO2 physisorption, SEM and 27Al MAS NMR. The calcination resulted in a partial collapse of the PHI structure. In the case of Na,K-PHI with a low surface area, the catalysis tends to take place on the outer surface, while in the case of Na,K-PHI with a high surface area the catalysis can also take place within the pore system. This has a considerable influence on the selectivity of the catalysts.

Engineered disorder in CO2 photocatalysis

Light harvesting, separation of charge carriers, and surface reactions are three fundamental steps that are essential for an efficient photocatalyst. Here we show that these steps in the TiO2 can be boosted simultaneously by disorder engineering. A solid-state reduction reaction between sodium and TiO2 forms a core-shell c-TiO2@a-TiO2-x(OH)y heterostructure, comprised of HO-Ti-[O]-Ti surface frustrated Lewis pairs (SFLPs) embedded in an amorphous shell surrounding a crystalline core, which enables a new genre of chemical reactivity. Specifically, these SFLPs heterolytically dissociate dihydrogen at room temperature to form charge-balancing protonated hydroxyl groups and hydrides at unsaturated titanium surface sites, which display high reactivity towards CO2 reduction. This crystalline-amorphous heterostructure also boosts light absorption, charge carrier separation and transfer to SFLPs, while prolonged carrier lifetimes and photothermal heat generation further enhance reactivity. The collective results of this study motivate a general approach for catalytically generating sustainable chemicals and fuels through engineered disorder in heterogeneous CO2 photocatalysts.

Metal-based adsorbents for water eutrophication remediation: A review of performances and mechanisms

Controlling eutrophication requires satisfying stringent phosphorus concentration standards. Metal-based adsorbents can effectively remove excess phosphorus from water bodies and achieve ultra-low phosphorus concentration control for wastewater. This review focuses on the material properties and phosphorus removal mechanism of metal-based adsorbents (Fe, Al, Ca, Mg, La). There are significant differences in physical and chemical properties of different metal materials, due to the different preparation methods and synthetic materials. The main factors affecting phosphorus removal performance include particle size, crystal structure and pH_PZC. Smaller particle size, more disordered crystal structure and higher pH_PZC are more favorable for phosphorus removal. The main mechanism of phosphorus removal by metal-based adsorbents is ligand exchange, which makes it exhibit excellent adsorption capacity, fast kinetics and well selectivity for phosphate. In addition, in order to improve the phosphorus removal performance, the surface properties of the adsorbent (e.g., surface charge, surface area, and functional groups) can be effectively improved by dispersion of biochar carriers or combination of multiple metal materials. In further studies, we should improve the absorption capacity of the adsorbent under high pH conditions and the resistance to coexisting ion interference. Finally, in order to ensure the effective application of metal-based adsorbents in the phosphorus removal field, experimental scale should be expanded in future work to suit the actual water body conditions.

Computational Aspects of Single-Molecule Kinetics for Coupled Catalytic Cycles: A Spectral Analysis

Catalysis from single active sites is analyzed using methods developed from single-molecule kinetics. Using a stochastic Markov-state description, the observable properties of general catalytic networks of reactions are expressed using an eigenvalue decomposition of the transition matrix for the Markov process. By the use of a sensitivity analysis, the necessary eigenvalues and eigenvectors are related to the energies of controlling barriers and wells located along the reaction routes. A generalization of the energetic span theory allows the eigenvalues to be computed from several activation energies corresponding to distinct barrier-well pairings. The formalism is demonstrated for model problems and for a physically realistic mechanism for an alkene hydrogenation reaction on a single-atom catalyst. The spectral analysis permits a hierarchy of timescales to be identified from the single-molecule signal, which correspond to specific relaxation modes in the network.

Synergistic Effects in the Activity of Nano-Transition-Metal Clusters Pt12M (M = Ir, Ru or Rh) for NO Dissociation

The dissociation of environmentally hazardous NO through dissociative adsorption on metallic clusters supported by oxides, is receiving growing attention. Building on previous research on monometallic M 13  clusters [J. Phys. Chem. C, 2019, 123(33), 20314-20318], this work considers bimetallic Pt 12 M (M = Rh, Ru or Ir) clusters. The adsorption energy and activation energy of NO dissociation on the clusters have been calculated in vacuum using Koh,-Sham DFT, while their trends were rationalized using reactivity indices such as molecular electrostatic potential and global Fermi softness. The results shown that doping of the Pt clusters lowered the adsorption energy as well as the activation energy for NO dissociation. Furthermore, reactivity indices were calculated as a first estimate of the performance of the clusters in realistic amorphous silica pores (MCM-41) through  ab initio  molecular dynamics simulations.

Oxidation-absorption process for simultaneous removal of NOx and SO2 over Fe/Al2O3@SiO2 using vaporized H2O2

3% Fe/Al₂O₃ and 3% Fe/Al₂O₃@SiO₂ were prepared to investigate the performance in simultaneous removal of NO_x and SO₂ using vaporized H₂O₂. Certain paraments were changed to explore the activity of catalysts, including temperature, H₂O₂ concentration, GHSV and coexistence gases component. A 24-h durability test was conducted on 3% Fe/Al₂O₃@SiO₂. Moreover, a series of characterizations were employed to analyze the physical and chemical properties of catalysts, including XRD, BET, SEM, TEM, FTIR and XPS. Compared with 3% Fe/Al₂O₃, 3% Fe/Al₂O₃@SiO₂ exhibited more excellent catalytic activity, which could achieve the peak removal efficiency of 100% for SO₂ and 93.76% for NO_x. Moreover, 3% Fe/Al₂O₃@SiO₂ kept stable simultaneous removal efficiency in a 24-h test. The characterization results indicated that the BET area was greatly improved and the core-shell structure was synthesized with the formation of more micropores and mesopores by the coating of SiO₂, which could improve the activity of catalyst at high temperature and high SO₂ concentration. Besides, the mechanism of SO₂ molecules on simultaneous removal was investigated. On one hand, a part of H₂O₂ was consumed by SO₂ molecules without catalyst, which resulted in the drop of NO_x removal by the decrease of oxidants. The main products were sulfites and bisulfites, which were broken down into SO₂ over the catalyst. On the other hand, the presence of SO₂ was beneficial for NO_x removal by increasing oxygen vacancies on the catalyst surface and facilitating the absorption of NO₂ by NaOH solution.

Understanding methanol dissociative adsorption and oxidation on amorphous oxide films

Interactions between a transition metal (oxide) catalyst and a support can tailor the number and nature of active sites, for instance in the methanol oxidation reaction. We here use ambient...

Unraveling the Function of Metal-Amorphous Support Interactions in Single-Atom Electrocatalytic Hydrogen Evolution

Amorphization of support in single-atoms catalysts is a less researched concept for promoting catalytic kinetics through modulating the metal-support interaction (MSI). We modeled single-atom ruthenium (Ru SAs ) supported on amorphous cobalt/nickel (oxy)hydroxide (Ru-a-CoNi) to explore the favorable MSI between Ru SAs and amorphous skeleton for alkaline hydrogen evolution reaction (HER). Differing from the usual crystal counterpart (Ru-c-CoNi), the electrons on Ru SAs are facilitated to exchange among local configurations (Ru-O-Co/Ni) of Ru-a-CoNi since flexibly amorphous configuration induces the possible d-d electrons transfer and medium-to-long range p-π orbitals coupling, further intensifying the MSI. It enables Ru-a-CoNi with enhanced water dissociation, alleviated oxophilicity, and rapid hydrogen migration, which results in superior durability and HER activity of Ru-a-CoNi, wherein only 15 mV can deliver 10 mA cm - 2 , significantly lower than 58 mV of Ru-c-CoNi.

Determining the Three-Dimensional Structures of Silica-Supported Metal Complexes from the Ground Up

The immobilization of molecularly precise metal complexes to substrates, such as silica, provides an attractive platform for the design of active sites in heterogeneous catalysts. Specific steric and electronic variations of the ligand environment enable the development of structure-activity relationships and the knowledge-driven design of catalysts. At present, however, the three-dimensional environment of the precatalyst, much less the active site, is generally not known for heterogeneous single-site catalysts. We explored the degree to which NMR-based surface-to-complex interatomic distances could be used to solve the three-dimensional structures of three silica-supported metal complexes. The structure solution revealed unexpected features related to the environment around the metal that would be difficult to discern otherwise. This approach appears to be highly robust and, due to its simplicity, is readily applied to most single-site catalysts with little extra effort.

Catalytic Activity of High-Surface-Area Amorphous MgO Obtained from Upsalite

The first aim of the research was to synthesize a pure Upsalite, which is an amorphous form of MgCO3, by modifying a procedure described in the literature, so that it would be the precursor of a high-surface, amorphous magnesium oxide. The results indicate that within the studied reaction conditions, the type of alcohol used as the reactant has the most pronounced effect on the yield of reaction. From the two alcohols that led to the highest yield of Upsalite, methanol gave a substantially larger surface area (794 vs. 191 m2 g−1). The optimized synthesis conditions of Upsalite were used to obtain MgO via thermolysis, whose activity in the transfer hydrogenation reaction (THR) from ethanol, 2-propanol and 2-pentanol to various carbonyl compounds was determined. The optimal conditions for the thermolysis were as follows: vacuum, T = 673 K as the final temperature, and a heating rate of 2 deg min−1. The high-surface, amorphous magnesia (SBET = 488 m2 g−1) was found to be a very selective catalyst to 4-t-butylcyclohexanone in THR, which led to a diastereoselectivity of over 94% to the E-isomer of 4-t-butylcyclohexanol for more than 3 h, with conversions of up to 97% with either 2-propanol or 2-pentanol as the hydrogen donor. In the case of acrolein and 2-n-propylacrolein being used as the hydrogen acceptors, the unsaturated alcohol (UOL) was the main product of the reaction, with higher UOL yields noted for ethanol than 2-propanol.

High-efficiency nitrate electroreduction to ammonia on electrodeposited cobalt-phosphorus alloy film

Electrocatalytic eight-electron nitrate (NO₃^-) reduction is a sustainable strategy to degrade NO₃^- and convert it into high value-added ammonia (NH₃) but needs efficient catalysts with high activity and selectivity. Our study shows the use of Ti plate supported cobalt-phosphorus alloy film (Co-P/TP) as a highly active and selective electrocatalyst for ambient NO₃^--to-NH₃ conversion. In 0.2 M Na₂SO₄ with 200 ppm NO₃^-, Co-P/TP offers an NH₃ yield rate of 416.0 ± 7.2 μg h^-1 cm^-2 and a high faradaic efficiency of 93.6 ± 3.3% at -0.6 V and -0.3 V vs. reversible hydrogen electrode, respectively, with good durability. Noticeably, a conversion rate of 86.9% is achieved after 10 h bulk electrolysis.

A comparative study for phosphate adsorption on amorphous FeOOH and goethite (α-FeOOH): An investigation of relationship between the surface chemistry and structure

Eutrophication is generally caused by excess nitrogen and phosphorus being released into surface waters by runoff. Developing adsorbents for adsorbing phosphate within soil buffer zones and/or water treatment columns may be effective methods to mitigate this problem. In this study, an amorphous FeOOH (AF) and a well-crystallized α-FeOOH (CF) was formulated to compare phosphate adsorption behavior. The physicochemical properties between these species showed significant differences in morphology, crystallization, zeta potential, and specific surface area. The AF exhibited higher phosphate uptake than CF. X-ray photoelectron spectroscopy (XPS) verified that the hydroxyl groups within AF were 13.28% higher than that in CF. The triply coordinated hydroxyl groups (μ₃-OH) associated with AF and CF appeared at different positions as shown in the diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analyses, confirming that AF contains more adsorption reactive sites (μ₃-OH). Mechanisms for monodentate formations and a stable six-member ring structure were proposed. The X-ray absorption near the edge structure (XANES) and XPS results suggested that the iron valence in AF was dominated by Fe (III). XANES also demonstrated that the amorphous structure found in the AF was caused by the disordered tetrahedron and octahedron alignments, leading to a higher phosphate adsorption.

Mechanochemical Preparation of Magnetically Separable Fe and Cu-Based Bimetallic Nanocatalysts for Vanillin Production

A highly sustainable method for the preparation of supported iron oxide and copper nanoparticles (NPs) on a biomass-derived carbon by solvent-free mechanochemical process is reported. In-situ mechanochemically obtained extracts from orange peel could behave as a green reducing agent, allowing the formation of Cu metal nanoparticles as well as generating a magnetic phase (magnetite) in the systems via partial Fe3+ reduction. At the same time, orange peel residues also served as template and carbon source, adding oxygen functionalities, which were found to benefit the catalytic performance of mechanochemically synthesized nanomaterials. The series of magnetic Cu-Fe@OP were tested in the oxidation of trans-ferulic acid towards vanillin, remarkably revealing a maximum vanillin yield of 82% for the sample treated at 200 °C.

Characterization of a Molecule Partially Confined at the Pore Mouth of a Zeotype

We investigate the interaction between a molecule and a pore mouth-a critical step in adsorption processes-by characterizing the conformation of a macrocyclic calix[4]arene-Ti^IV complex, which is grafted on the external surface of a zeotype (*-SVY). X-ray absorption and ¹³ C{¹ H} CPMAS NMR spectroscopies independently detect a unique conformation of this complex when it is grafted at crystallographically equivalent locations that lie at the interface of 7 Å hemispherical microporous cavities and the external surface. Electronic structure calculations support the presence of this unique conformation, and suggest that it is brought about by a specific orientation of the macrocycle that maximizes non-covalent interactions between calix[4]arene upper-rim tert-butyl substituents and the microporous-cavity walls. Our comparative study provides a rare "snapshot" of a molecule partially confined at a pore mouth, an essential intermediate for adsorption into micropores, and demonstrates how surrounding environment controls this confinement in a sensitive fashion.

Simulations of the IR and Raman spectra of water confined in amorphous silica slit pores

Water in nano-scale confining environments is a key element in many biological, material, and geological systems. The structure and dynamics of the liquid can be dramatically modified under these conditions. Probing these changes can be challenging, but vibrational spectroscopy has emerged as a powerful tool for investigating their behavior. A critical, evolving component of this approach is a detailed understanding of the connection between spectroscopic features and molecular-level details. In this paper, this issue is addressed by using molecular dynamics simulations to simulate the linear infrared (IR) and Raman spectra for isotopically dilute HOD in D₂O confined in hydroxylated amorphous silica slit pores. The effect of slit-pore width and hydroxyl density on the silica surface on the vibrational spectra is also investigated. The primary effect of confinement is a blueshift in the frequency of OH groups donating a hydrogen bond to the silica surface. This appears as a slight shift in the total (measurable) spectra but is clearly seen in the distance-based IR and Raman spectra. Analysis indicates that these changes upon confinement are associated with the weaker hydrogen-bond accepting properties of silica oxygens compared to water molecules.

Importance learning estimator for the site-averaged turnover frequency of a disordered solid catalyst

For disordered catalysts such as atomically dispersed "single-atom" metals on amorphous silica, the active sites inherit different properties from their quenched-disordered local environments. The observed kinetics are site-averages, typically dominated by a small fraction of highly active sites. Standard sampling methods require expensive ab initio calculations at an intractable number of sites to converge on the site-averaged kinetics. We present a new method that efficiently estimates the site-averaged turnover frequency (TOF). The new estimator uses the same importance learning algorithm [Vandervelden et al., React. Chem. Eng. 5, 77 (2020)] that we previously used to compute the site-averaged activation energy. We demonstrate the method by computing the site-averaged TOF for a simple disordered lattice model of an amorphous catalyst. The results show that with the importance learning algorithm, the site-averaged TOF and activation energy can now be obtained concurrently with orders of magnitude reduction in required ab initio calculations.

Uniform Mesoporous Amorphous Cobalt-Inherent Silicon Oxide as a Highly Active Heterogeneous Catalyst in the Activation of Peroxymonosulfate for Rapid Oxidation of 2,4-Dichlorophenol: The Important Role of Inherent Cobalt in the Catalytic Mechanism

Amorphous cobalt-inherent silicon oxide (Co-SiOx) was synthesized for the first time and employed as a highly active catalyst in the activation of peroxymonosulfate (PMS) for the rapid oxidation of 2,4-dichlorophenol (2,4-DCP). The characterization results revealed that the 0.15Co-SiOx possessed a high specific surface area of 607.95 m²/g with a uniform mesoporous structure (24.33 nm). The X-ray diffraction patterns indicate that the substituted cobalt atoms enlarge the unit cell parameter of the original SiO₂, and the selected area electron diffraction pattern confirmed the amorphous nature of Co-SiOx. More bulk oxygen vacancies (O_v) existing in the Co-SiOx were identified to be one of the primary contributors to the significantly enhanced catalytic activation of PMS. The cobalt substitution both creates and stabilizes the surficial O_v and forms the adequately active Co(II)-O_v pairs which engine the electron transfer process during the catalytic activities. The active Co(II)-O_v pairs weaken the average electronegativity of Co/Si and Co/O sites, resulting in the prevalent changes in final state energy, which is the main driving cause of the binding energy shifts in the X-ray photoelectron spectroscopy (XPS) spectra of Si and O among all samples. The increase of the relative proportion of Co(III) in the spent Co-SiOx probably causes the binding energy shifts of the Co XPS spectrum compared to that of the Co-SiOx. The amorphous Co-SiOx outperforms stable and quick 2,4-DCP degradation, achieving a much higher kinetic rate of 0.7139 min^-1 at pH = 7.02 than others via sulfate radical advanced oxidation processes (AOPs), photo-Fenton AOPs, H₂O₂ reagent AOPs, and other AOP approaches. The efficient degradation performance makes the amorphous Co-SiOx as a promising catalyst in removing 2,4-DCP or organic-rich pollutants.

Tutorial: structural characterization of isolated metal atoms and subnanometric metal clusters in zeolites

The encapsulation of subnanometric metal entities (isolated metal atoms and metal clusters with a few atoms) in porous materials such as zeolites can be an effective strategy for the stabilization of those metal species and therefore can be further used for a variety of catalytic reactions. However, owing to the complexity of zeolite structures and their low stability under the electron beam, it is challenging to obtain atomic-level structural information of the subnanometric metal species encapsulated in zeolite crystallites. In this protocol, we show the application of a scanning transmission electron microscopy (STEM) technique that records simultaneously the high-angle annular dark-field (HAADF) images and integrated differential phase-contrast (iDPC) images for structural characterization of subnanometric Pt and Sn species within MFI zeolite. The approach relies on the use of a computational model to simulate results obtained under different conditions where the metals are present in different positions within the zeolite. This imaging technique allows to obtain simultaneously the spatial information of heavy elements (Pt and Sn in this work) and the zeolite framework structure, enabling direct determination of the location of the subnanometric metal species. Moreover, we also present the combination of other spectroscopy techniques as complementary tools for the STEM-iDPC imaging technique to obtain global understanding and insights on the spatial distributions of subnanometric metal species in zeolite structure. These structural insights can provide guidelines for the rational design of uniform metal-zeolite materials for catalytic applications.