Engineering Crystal Facet of α-MnO2 Nanowire for Highly Efficient Catalytic Oxidation of Carcinogenic Airborne Formaldehyde

Selective activation of dioxygen to singlet oxygen over La-Si co-doped TiO2 microspheres for photocatalytic degradation of formaldehyde

Volatile Organic Compounds (VOCs) are highly harmful to human beings and other organisms, and thus the elimination of VOCs is extremely urgent. Here, La-Si co-doped TiO2 microsphere photocatalysts, which were prepared by a hydrothermal method, exhibited high photocatalytic activity in the decomposition of formaldehyde compared with TiO2. The improved activity can be attributed to the promoted separation efficiency and density of the charge carriers, as verified by the electrochemical results in combination with density functional theory calculations. In addition, the Si dopant changed the microstructure and surface acidity, while the addition of La promoted the separation efficiency of charge carriers. More interestingly, it was found that singlet oxygen was the key species in the activation of molecular dioxygen, and it played a pivotal role in the photocatalytic decomposition of formaldehyde. This work provides a novel strategy for the selective activation of dioxygen for use in the decomposition of formaldehyde.

Co-doped cryptomelane-type manganese oxide in situ grown on a nickel foam substrate for high humidity ozone decomposition

Monolithic catalysts with excellent O3 catalytic decomposition performance were prepared by in situ loading of Co-doped KMn8O16 on the surface of nickel foam. The triple-layer structure with Co-doped KMn8O16/Ni6MnO8/Ni foam was grown spontaneously on the surface of nickel foam by tuning the molar ratio of KMnO4 to Co(NO3)2·6H2O precursors. Importantly, the formed Ni6MnO8 structure between KMn8O16 and nickel foam during in situ synthesis process effectively protected nickel foam from further etching, which significantly enhanced the reaction stability of catalyst. The optimum amount of Co doping in KMn8O16 was available when the molar ratio of Mn to Co species in the precursor solution was 2:1. And the Mn2Co1 catalyst had abundant oxygen vacancies and excellent hydrophobicity, thus creating outstanding O3 decomposition activity. The O3 conversion under dry conditions and relative humidity of 65%, 90% over a period of 5 hr was 100%, 94% and 80% with the space velocity of 28,000 hr-1, respectively. The in situ constructed Co-doped KMn8O16/Ni foam catalyst showed the advantages of low price and gradual applicability of the preparation process, which provided an opportunity for the design of monolithic catalyst for O3 catalytic decomposition.

Tuning the crystallinity of the MnOx catalysts to promote toluene catalytic oxidation

In this paper, the MnOx catalysts with excellent toluene oxidation performance were prepared by a simple precipitation method. The physicochemical properties of the prepared MnOx catalysts were investigated by XRD, BET, H2-TPR, O2-TPD and XPS. The obtained results revealed that the crystallinity of the prepared MnOx catalysts could be effectively regulated by changing the (NH4)2CO3/Mn(NO3)2 molar ratio, and thus affecting the oxygen vacancy concentration of the prepared MnOx catalysts. The prepared MnOx-4 catalyst with the (NH4)2CO3/Mn(NO3)2 molar ratio of 4.0 had the poor crystallinity and small grain size, which effectively promoted the oxygen defects in the MnOx catalyst to be formed. At the same time, the MnOx-4 catalyst had a large specific surface area, the highest low temperature reducibility and the largest number of oxygen vacancies and surface adsorbed oxygen species, which allowed more surface oxygen species to participate in the redox reaction, and promoted the toluene deep oxidation. Therefore, when the (NH4)2CO3/Mn(NO3)2 molar ratio was 4.0, the prepared MnOx-4 catalyst exhibited an excellent toluene catalytic oxidation performance and robust catalytic stability. What's more, the toluene oxidation conversion on the MnOx-4 catalyst reached 99% at 230°C, and the MnOx-4 catalyst showed excellent resistance to water vapour.

Oxygen vacancy-rich K-Mn3O4@CeO2 catalyst for efficient oxidation degradation of formaldehyde at near room temperature

Synthesis of catalysts with high catalytic degradation activity for formaldehyde (HCHO) at room temperature is highly desirable for indoor air quality control. Herein, a novel K-Mn3O4@CeO2 catalyst with excellent catalytic oxidation activity toward HCHO at near room temperature was reported. In particular, the K addition in K-Mn3O4@CeO2 considerably enhanced the oxidation activity, and importantly, 99.3 % conversion of 10 mL of a 40 mg/L HCHO solution at 30 °C for 14 h was achieved, with simultaneous strong cycling stability. Moreover, the addition of K species considerably influenced the chemical valence state of Mn from +4 (ε-MnO2) to +8/3 (Mn3O4) on the surface of CeO2, which obviously changed the tunnel structure and the number of oxygen vacancies. One part of K species is uniformly dispersed on K-Mn3O4@CeO2, and the other part exists in the tunnel structure of Mn3O4@CeO2, which is mainly used to balance the negative charge of the tunnel and prevent collapse of the structure, providing enough active sites for the catalytic oxidation of HCHO. We observed a phase transition from tunneled KMnO2 to Mn3O4 to tunneled MnO2 with the decreasing K+ content, in which K-Mn3O4@CeO2 exhibited higher HCHO oxidation activity. In addition, K-Mn3O4@CeO2 exhibited lower oxygen vacancy formation and HCHO adsorption energies in aqueous solution based on density functional theory calculations. This is because the K species provide more active oxygen species and richer oxygen vacancies on the surface of K-Mn3O4@CeO2, promote the mobility of lattice oxygen and the room-temperature reduction properties of oxygen species, and enhance the ability of the catalyst to replenish the consumed oxygen species. Finally, a possible HCHO catalytic oxidation pathway on the surface of K-Mn3O4@CeO2 catalyst is proposed.

Bamboo-like MnO2⋅Co3O4: High-performance catalysts for the oxidative removal of toluene

The manganese-cobalt mixed oxide nanorods were fabricated using a hydrothermal method with different metal precursors (KMnO4 and MnSO4·H2O for MnOx and Co(NO3)2⋅6H2O and CoCl2⋅6H2O for Co3O4). Bamboo-like MnO2⋅Co3O4 (B-MnO2⋅Co3O4 (S)) was derived from repeated hydrothermal treatments with Co3O4@MnO2 and MnSO4⋅H2O, whereas Co3O4@MnO2 nanorods were derived from hydrothermal treatment with Co3O4 nanorods and KMnO4. The study shows that manganese oxide was tetragonal, while the cobalt oxide was found to be cubic in the crystalline arrangement. Mn surface ions were present in multiple oxidation states (e.g., Mn4+ and Mn3+) and surface oxygen deficiencies. The content of adsorbed oxygen species and reducibility at low temperature declined in the sequence of B-MnO2⋅Co3O4 (S) > Co3O4@MnO2 > MnO2 > Co3O4, matching the changing trend in activity. Among all the samples, B-MnO2⋅Co3O4 (S) showed the preeminent catalytic performance for the oxidation of toluene (T10% = 187°C, T50% = 276°C, and T90% = 339°C). In addition, the B-MnO2⋅Co3O4 (S) sample also exhibited good H2O-, CO2-, and SO2-resistant performance. The good catalytic performance of B-MnO2⋅Co3O4 (S) is due to the high concentration of adsorbed oxygen species and good reducibility at low temperature. Toluene oxidation over B-MnO2⋅Co3O4 (S) proceeds through the adsorption of O2 and toluene to form O*, OH*, and H2C(C6H5)* species, which then react to produce benzyl alcohol, benzoic acid, and benzaldehyde, ultimately converting to CO2 and H2O. The findings suggest that B-MnO2⋅Co3O4 (S) has promising potential for use as an effective catalyst in practical applications.

Revealing the key role of interfacial oxygen activation over CoMn2O4@MnO2 in the catalytic oxidation of acetone

The accumulation of intermediate products on the catalyst surface caused by insufficient oxygen activity is an important reason for the poor activity of catalysts towards oxygenated volatile organic compounds (OVOCs). CoMn2O4@MnO2 heterogeneous catalysts were fabricated to decipher the interfacial oxygen activation mechanism for efficient acetone oxidation. Experimental and theoretical explorations revealed that oxygen vacancies were easily formed at the interface. Gaseous oxygen tended to adsorb on the interfacial vacancies while bonding with adjacent Mn sites, resulting in the stretching of O-O bonds. Rapid electron transfer at the interface led to the charge accumulation on the two oxygen atoms inducing electrostatic repulsion. These factors are conducive to the O-O bond breaking and gaseous oxygen activation. The obtained CoMn2O4@0.8MnO2 exhibited excellent catalytic performance with 90 % of acetone conversion at 159 °C, better than CoMn2O4 and MnO2. The acetone oxidation on CoMn2O4@0.8MnO2 not only avoided the accumulation of aldehydes, but also realized the rapid degradation of acetate into formate, achieving the shortest degradation pathway due to the rapid interfacial oxygen activation. CoMn2O4@0.8MnO2 also exhibited better catalytic activity for other OVOCs (ethyl acetate, ethylene oxide, methanol). This work provides new insights for the mechanism of interfacial oxygen activation and the design of heterogeneous catalyst for efficient OVOC oxidation.

Predominance of aminated water interfaces on transition-metal nanoparticulate to enhance synergetic removal of carbonyls and inhibition of CO2 production

In the context of the air quality co-benefits of carbon neutrality, conventional strategies for the end-of-pipe control aimed at reducing volatile organic compounds (VOCs) to carbon dioxide (CO2) require a more realistic revision. This study explored the synergetic removal of carbonyls with low carbon emission by amine-functionalized manganese dioxide (MnO2), obtained through a method involving freezing-thawing cycles. Molecular-level characterization revealed that an ordered array of interfacial water dimers (H5O2+, a class of water-proton clusters) on the MnO2 surface enhanced the robust bonding of metal sites with amino groups. Amine-functionalized MnO2 can be negatively charged under environmental acidity to further interfacial proton-coupled electron transfers. This cooperativity in interfacial chemical processes promoted the selective conversion of carbonyl carbons to bicarbonated amides (NH3+HCO3-), serving as a reservoir of CO2. In comparison to a commercially used 2,4-dinitrophenylhydrazine (DNPH) control, this approach achieved nearly complete removal of a priority carbonyl mixture containing formaldehyde, acetaldehyde, and acetone synergically. The formation of secondary organic compounds in the gas phase and CO2 off-gas were suppressed.

Sintering Evolving Mn2O3-LaMnO3 Perovskite Heterointerfaces as Highly Active and Durable Catalysts for Catalytic Removal of Volatile Organic Compounds

Improving the catalyst performance for the thermal oxidation reaction faces the daunting challenge of the activity-stability trade-off. Herein, an evolved heterointerface was constructed on spherical Mn2O3 nanocatalysts to achieve exceptional stability while maintaining adequate activity by simply introducing La. The generation of the active Mn3O4-Mn2O3 heterointerfaces by La doping was experimentally observed, which further segregates to the surface during thermal aging and forms epitaxially grown heterostructured LaMnO3-Mn2O3 with Mn atoms. The former can act as highly active sites for the deep oxidation of VOCs due to the richness in oxygen vacancies and Mn4+ ions, while the latter acts as the diffusion barrier to inhibit grain growth and produce advantageous reactive electronic structures around the interface. The La-modified Mn2O3 oxide reached 90% conversion in toluene oxidation at 286 °C under the high WHSV of 240,000 mL g-1 h-1 and slightly increased to 327 °C after thermal aging at 800 °C. This work provides a versatile strategy for fabricating effective oxidation catalysts with high low-temperature activity and antisintering properties for industrial applications.

One-Step Hydrothermal Synthesis of Glucose-Induced Low Crystallinity NiCo-Based Layered Double Hydroxides for High-Performance Asymmetric Supercapacitors

In order to improve the electrochemical performance of NiCo-based layered double hydroxide (NiCoLDH), the synthesis of low-crystallinity NiCoLDH was induced by the adsorption of glucose and NiCoLDH. The results showed that glucose could not only effectively regulate the pore structure and morphology of NiCoLDH, but also had a regular effect on crystallinity. Pure phase NiCoLDH had higher crystallinity. When the mass of glucose is 0.05 g, the prepared NiCoLDH-0.05 is a short-range ordered structure embedded in the amorphous matrix. The crystallinity of the product decreases further with the further increase of glucose mass. Since the ordered structures have higher electrical conductivity, and amorphous structures have more defects and active sites, the structure of NiCoLDH-0.05 is conducive to achieving the best electrochemical performance. Electrochemical test results show that NiCoLDH-0.05 has a high specific capacitance, about 12 times that of the pure phase NiCoLDH, the mass of glucose is higher than or below 0.05 g, the specific capacitance will be further reduced. NiCoLDH-0.05 and activated carbon assembled into an asymmetric supercapacitor have a power density of 400 W kg-1 at an energy density of 32.7 Wh kg-1. This study provides a new idea for obtaining excellent electrochemical properties by adjusting LDH crystallinity.

Unveiling the role of oxygen vacancy of manganese oxide coating on Ni foam to magnetocaloric catalytic oxidation of toluene

Using a pulsed-voltage technique, the manganese oxide (MnOx) coating on Ni foam (NF) was regulated to encourage magnetocaloric oxidation, which lowers volatile organic compounds (VOCs). The MnOx/NF was obtained by electrodeposition of MnOx onto NF. Subsequently, MnOx/NF-PV was obtained by pulsed-voltage modification. According to the structural characterization, the pulsed-voltage modification changed the interaction between the coating and the support, resulting in increased toluene adsorption capacity, oxygen desorption capability, oxygen vacancy (OV) quantity of MnOx/NF-PV. The MnOx/NF-PV exhibits excellent catalytic performance, with a 90 % conversion of toluene at 170 °C, where OV play an important role as electronic intermediates in magnetocaloric oxidation reactions. Furthermore, compared to traditional thermal catalysis, electromagnetic induction heating (EMIH) can promote the reactivity of OV in magnetocaloric catalysts by increasing the activation and dissociation of oxygen species and thus catalytic activity, which was demonstrated in the 18O isotope exchange experiment.

Enhancing Ozone Decomposition in Humid Environments through Carbon Doping to Disrupt the Hydrogen Bond Network in Mullite YMn2O5

The strong adsorption of water molecules at the active site of the catalyst presents significant challenges in ozone decomposition, particularly at room temperature and in humid environments. To address this issue, we doped carbon atoms into the Mn-mullite YMn2O5 catalyst to replace oxygen, resulting in efficient and stable ozone decomposition under highly humid conditions. Utilizing DFT calculations, our study demonstrated that carbon doping disrupts hydrogen bond networks on the catalyst surface, thereby reducing water adsorption. Furthermore, carbon doping regulated the electronic structure of active sites, fundamentally reversing the adsorption strength of water and ozone molecules, which avoids the decline in catalytic activity caused by competitive water adsorption. Experimentally, under room temperature and relative humidity (RH) 50%, the carbon-doped YMn2O5 catalyst maintained 100% conversion in decomposing 100 ppm of ozone for at least 24 h, surpassing the most reported catalysts against water poisoning. Furthermore, the utilization of a carbon-doped mullite-loaded air cleaner demonstrated promising application in degrading ozone. The approach of enhancing catalyst water resistance through carbon doping, which disrupts hydrogen bonds, provided valuable insights into the design of stable and efficient room-temperature ozonolysis catalysts.

Design of Mn-based nanozymes with multiple enzyme-like activities for identification/quantification of glyphosate and green transformation of organophosphorus

A Mn-based nanozyme, Mn-uNF/Si, with excellent alkali phosphatase-like activity was designed by in-situ growth of ultrathin Mn-MOF on the surface of silicon spheres, and implemented as an effective solid Lewis-Brønsted acid catalyst for broad-spectrum dephosphorylation. H218O-mediated GC-MS studies confirmed the cleavage sites and the involvement of H2O in the new bonds. DRIFT NH3-IR and in-situ ATR-FTIR confirmed the coexistence of Lewis-Brønsted acid sites and the adjustment of adsorption configurations at the interfacial sites. In addition, a green transformation route of "turning waste into treasure" was proposed for the first time ("OPs→PO43-→P food additive") using edible C. reinhardtii as a transfer station. By alkali etching of Mn-uNF/Si, a nanozyme Mn-uNF with laccase-like activity was obtained. Intriguingly, glyphosate exhibits a laccase-like fingerprint-like response (+,-) of Mn-uNF, and a non-enzyme amplified sensor was thus designed, which shows a good linear relationship with Glyp in a wide range of 0.49-750 μM, with a low LOD of 0.61 μM, as well as high selectivity and anti-interference ability under the co-application of phosphate fertilizers and multiple pesticides. This work provides a controllable methodology for the design of bifunctional nanozymes, which sheds light on the highly efficient green transformation of OPs, and paves the way for the selective recognition and quantification of glyphosate. Mechanistically, we also provided deeper insights into the structure-activity relationship at the atomic scale.

Acid-activated α-MnO2 for photothermal co-catalytic oxidative degradation of propane: Activity and reaction mechanism

In order to further reduce the energy consumption of the conventional thermal catalytic oxidation system and improve the degradation efficiency of pollutants, photothermal synergistic catalytic oxidation (PTSCO) system was constructed in this paper with propane as simulated pollutant representing VOCs, and then the modified α-MnO2 catalysts were prepared by using the acid activation method, which were used for the catalytic oxidation of propane in PTSCO. The α-MnO2 with appropriate acid concentration possessed excellent low-temperature reducibility, abundant active oxygen species, fast oxygen migration rate and a large number of acid sites. The optimal catalyst, H0.05-MnO2, had a T90 of 204 °C in the PTSCO system, which reduced by more than 30 °C relative to the α-MnO2 (T90 of 235 °C). Moreover, H0.05-MnO2 demonstrated excellent water resistance and long-term stability (T = 45 h). It was shown that the combination of photocatalysis and thermocatalysis can improve propane degradation by examining the kinetics of propane degradation in the PTSCO system and the conformational relationship of propane degradation by catalysts. Furthermore, a multi-pathway synergistic mechanism between photocatalysis and thermocatalysis in the PTSCO system was proposed. This work provided a theoretical basis for the preparation of high-performance catalysts and the catalytic degradation of propane.

Oxidative stress modulating nanomaterials and their biochemical roles in nanomedicine

Many pathological conditions are predominantly associated with oxidative stress, arising from reactive oxygen species (ROS); therefore, the modulation of redox activities has been a key strategy to restore normal tissue functions. Current approaches involve establishing a favorable cellular redox environment through the administration of therapeutic drugs and redox-active nanomaterials (RANs). In particular, RANs not only provide a stable and reliable means of therapeutic delivery but also possess the capacity to finely tune various interconnected components, including radicals, enzymes, proteins, transcription factors, and metabolites. Here, we discuss the roles that engineered RANs play in a spectrum of pathological conditions, such as cancer, neurodegenerative diseases, infections, and inflammation. We visualize the dual functions of RANs as both generator and scavenger of ROS, emphasizing their profound impact on diverse cellular functions. The focus of this review is solely on inorganic redox-active nanomaterials (inorganic RANs). Additionally, we deliberate on the challenges associated with current RANs-based approaches and propose potential research directions for their future clinical translation.

Unraveling the Fluoride-Induced Interface Reconstruction Across Lead-Based Hierarchical MnO2 Anode in Zinc Electrowinning

Although the hierarchical manganese dioxide film electrode shows promise as a durable and catalytically active anode for zinc electrowinning, it often fails and deactivates when it is exposed to fluoride-rich environments. The lack of understanding regarding the mechanism behind fluoride-induced irreversible interface reconstruction hinders their practical application in large-scale energy-saving and pollution-reduction efforts. Here, we conducted multidimensional operando investigations to gain insights into the dynamic evolution across the film electrode interface with temporal and spatial resolution. Our findings reveal that electroosmosis of F- initially triggers structural collapse and subsequent reconstruction of [MnO6] units, followed by interaction with the spontaneous oxide film at the surface of lead substrate. Experimental studies and theoretical calculations indicate that F- facilitates the irreversible transformation of γ-MnO2 into more stable yet protective catalytic dual-defective α-MnO2. Additionally, lower levels of F- at the interface promote a change in microenvironmental pH within porous PbSO4, triggering the development of microporous corrosion-resistant β-PbO2 as the dominant phase. The combined effects of MnO2 and interphase evolution effectively explain the abnormally elevated oxygen evolution overpotential. Then, the proposed appropriate application scenarios based on the corrosion behavior will serve as a practical guide for the implementation of the hierarchical manganese dioxide film electrode.

Boosting the removal of diesel soot particles by regulating the Pr-O strength over transition metal doped Pr6O11 catalysts

The content of active lattice oxygen and oxygen vacancies is crucial for the catalytic oxidation of soot. Herein, we adjust the Pr-O bond strength in Pr6O11 by doping several common transition metals (Mn, Fe, Co, Ni) to promote the formation of oxygen vacancies and the activation of lattice oxygen. This strategy does not compromise its crystal structure, allowing for improved catalytic performance while maintaining stability. The Mn-doped Pr6O11 catalyst shows the best soot catalytic oxidation performance. Its T50 (the temperature of soot conversion reaching 50 %) value is 396 °C under loose contact. Further characterizations and density functional theory (DFT) calculations demonstrate that PMO possesses a large specific surface area. Additionally, the weakening the strength of the Pr-O bond leaded to an increase in oxygen vacancies, which in turn enhanced the redox ability of catalyst. This work will provide a reference for the development of Pr-based catalysts for soot combustion.

Cation-Induced Self-Assembly of α-MnO2 Nanowires into High-Purity Self-Standing Three-Dimensional Network Aerogels for Catalytic Decomposition of Carcinogenic Formaldehyde at Ambient Temperature

Formaldehyde (HCHO), a ubiquitous gaseous pollutant in indoor environments, threatens human health under long-term exposure, necessitating its effective elimination. Due to its advantages in enhancing mass transfer and effectively exposing active sites, aerogels with a three-dimensional (3D) interconnected network structure are expected to achieve efficient and stable decomposition of HCHO at ambient temperature. However, how to realize the self-assembly of transition metal oxides to construct high-purity 3D network aerogels is still a huge challenge. Herein, the cation-induced self-assembly strategy was developed to construct high-purity self-standing 3D network manganese dioxide aerogels. The interaction between cations and the surface groups of nanowires is crucial for successful self-assembly, which leads to the cross-winding of nanowires with each other, forming a 3D-structured network. The K+-induced 3D-MnO2 exhibited excellent catalytic performance for HCHO, which could continuously and steadily decompose HCHO into CO2 and H2O at ambient temperature. Thanks to the 3D interconnected network structure, on the one hand, it provides a large specific surface area and porosity, reducing mass transfer resistance and promoting the adsorption of HCHO and O2 molecules. On the other hand, it is more important to fully expose the active sites, which can generate more surface active oxygen species and achieve effective recycling and regeneration. Importantly, 3D-MnO2 has a strong ability to capture and activate water molecules in the atmosphere, which could be further involved in the replenishment of the consumed hydroxyl groups. This study proposes a strategy for self-assembly of transition metal oxides through cation-induction, which provides a new catalyst design approach for the room temperature decomposition of VOCs.

Efficacious destruction of typical aromatic hydrocarbons over CoMn/Ni foam monolithic catalysts with boosted activity and water resistance

Developing cost-effective monolith catalyst with superior low-temperature activity is critical for oxidative efficacious removal of industrial volatile organic compounds (VOCs). However, the complexity of the industrial flue gas conditions demands the need for high moisture tolerance, which is challenging. Herein, CoMn-Metal Organic Framework (CoMn-MOF) was in situ grown on Ni foam (NiF) at room temperature to synthesize the cost-effective monolith catalyst. The optimized catalyst, Co1Mn1/NiF, exhibited excellent performance in toluene oxidation (T90 = 239 °C) due to the substitution of manganese into the cobalt lattice. This substitution weakened the Co-O bond strength, creating more oxygen vacancies and increasing the active oxygen species content. Additionally, experimentally and computationally evidence revealed that the mutual inhibiting effect of three typical aromatic hydrocarbons (benzene, toluene and m-xylene) over the Co1Mn1/NiF catalyst was attributed to the competitive adsorption occurring on the active site. Furthermore, the Co1Mn1/NiF catalyst also presents outstanding water resistance, particularly at a concentration of 3 vol%, where the activity is even enhanced. This was attributed to the lower water adsorption and dissociation energy derived from the interaction between the bimetals. Results demonstrate that the dissociation of water vapor enables more reactive oxygen species to participate in the reaction which reduces the formation of intermediates and facilitates the reaction. This investigation provides new insights into the preparation of oxygen vacancy-rich monolith catalysts with high water resistance for practical applications.

The influence of crystal facet on the catalytic performance of MOFs-derived NiO with different morphologies for the total oxidation of propane: The defect engineering dominated by solvent regulation effect

Crystal facet and defect engineering are crucial for designing heterogeneous catalysts. In this study, different solvents were utilized to generate NiO with distinct shapes (hexagonal layers, rods, and spheres) using nickel-based metal-organic frameworks (MOFs) as precursors. It was shown that the exposed crystal facets of NiO with different morphologies differed from each other. Various characterization techniques and density functional theory (DFT) calculations revealed that hexagonal-layered NiO (NiO-L) possessed excellent low-temperature reducibility and oxygen migration ability. The (111) crystal plane of NiO-L contained more lattice defects and oxygen vacancies, resulting in enhanced propane oxidation due to its highest O2 adsorption energy. Furthermore, the higher the surface active oxygen species and surface oxygen vacancy concentrations, the lower the C-H activation energy of the NiO catalyst and hence the better the catalytic activity for the oxidation of propane. Consequently, NiO-L exhibited remarkable catalytic activity and good stability for propane oxidation. This study provided a simple strategy for controlling NiO crystal facets, and demonstrated that the oxygen defects could be more easily formed on NiO(111) facets, thus would be beneficial for the activation of C-H bonds in propane. In addition, the results of this work can be extended to the other fields, such as propane oxidation to propene, fuel cells, and photocatalysis.

Crystal phase-driven performance of MnO2 in aqueous phase low-temperature thermal catalysis: Synergistic interactions between Mn3+ and surface lattice oxygen

Catalytic oxidation at mild conditions is crucial for mitigating the high pressure and high temperature challenges associated with current catalytic wet air oxidation (CWAO) technologies in wastewater treatment. Among potential materials for catalytic oxidation reactions, polycrystalline MnO2 existed in natural minerals holds considerable promise. However, the relationships between different crystal phases of MnO2 and their catalytic activity sources in aqueous phase remain uncertain and subject to debate. In this research, we synthesized various MnO2 crystal phases, comprising α-, β-, δ-, γ-, ε-, and λ-MnO2, and assessed their catalytic oxidation efficiency during low-temperature heating for treatment of organic pollutants. Our findings demonstrate that λ-MnO2 exhibits the highest catalytic activity, followed by δ-MnO2, γ-MnO2, α-MnO2, ε-MnO2, and β-MnO2. The variations in catalytic activity among different MnO2 are attributed to variances in their oxygen vacancy abundance and redox activity. Furthermore, we identified the primary active species, which include Mn3+ and superoxide radicals (•O2-) generated by surface lattice oxygen of MnO2. This research highlights the critical role of crystal phases in influencing oxygen vacancy content, redox activity, and overall catalytic performance, providing valuable insights for the rational design of MnO2 catalysts tailored for effective organic pollutant degradation in CWAO applications.

Facet-engineering strategy of phosphogypsum for production of mineral slow-release fertilizers with efficient nutrient fixation and delivery

Phosphogypsum (PG) presents considerable potential for agricultural applications as a secondary primary resource. However, it currently lacks environmentally friendly, economically viable, efficient, and sustainable reuse protocols. This study firstly developed a PG-based mineral slow-release fertilizer (MSRFs) by internalization and fixation of urea within the PG lattice via facet-engineering strategy. The molecular dynamics simulations demonstrated that the binding energy of urea to the (041) facet of PG surpassed that of the (021) and (020) facets, with urea's desorption energy on the (041) facet notably higher than on the (021) and (020) facets. Guided by these calculations, we selectively exposed the (041) dominant facet of PG, and then achieving complete urea fixation within the PG lattice to form urea-PG (UPG). UPG exhibited a remarkable 48-fold extension in N release longevity in solution and a 45.77% increase in N use efficiency by plants compared to conventional urea. The facet-engineering of PG enhances the internalization and fixation efficiency of urea for slow N delivery, thereby promoting nutrient uptake for plant growth. Furthermore, we elucidated the intricate interplay between urea and PG at the molecular level, revealing the involvement of hydrogen and ionic bonding. This specific bonding structure imparts exceptional thermal stability and water resistance to the urea within UPG under environmental conditions. This study has the potential to provide insights into the high-value utilization of PG and present innovative ideas for designing efficient MSRFs.

Efficient and Durable Oxidation Removal of Formaldehyde over Layered Double Hydroxide Catalysts at Room Temperature

Room temperature catalytic oxidation (RTCO) using non-noble metals has emerged as a highly promising technique for removal of formaldehyde (HCHO) under ambient conditions; however, non-noble catalysts still face the challenges related to poor water resistance and low stability under harsh conditions. In this study, we synthesized a series of layered double hydroxides (LDHs) incorporating various dual metals (MgAl, ZnAl, NiAl, NiFe, and NiTi) for formaldehyde oxidation at ambient temperature. Among the synthesized catalysts, the NiTi-LDH catalyst showed an HCHO removal efficiency and CO2 yield close to 100.0%, and exceptional water resistance and chemical stability on running 1300 min. The abundant hydroxyl groups in LDHs directly bonded with HCHO, leading to the production of CO2 and H2O, thus inhibiting the formation of CO, even in the absence of O2 and H2O. The coexistence of O2 effectively reduced the reaction barrier for H2O molecule dissociation, facilitating the formation of hydroxyl groups and their subsequent backfill on the catalyst surface. The mechanisms underlying the involvement and regeneration of hydroxyl groups in room temperature oxidation of formaldehyde were elucidated with the combined in situ DRIFTS, HCHO-TPD-MS, and DFT calculations. This work not only demonstrates the potential of LDH catalysts in environmental applications but also advances the understanding of the fundamental processes involved in room temperature oxidation of formaldehyde.

Weakening Mn-O Bond Strength in Mn-Based Perovskite Catalysts to Enhance Propane Catalytic Combustion

Exploring highly efficient and robust non-noble metal catalysts for VOC abatement is crucial but challenging. Mn-based perovskites are a class of redox catalysts with good thermal stability, but their activity in the catalytic combustion of light alkanes is insufficient. In this work, we modulated the Mn-O bond strength in a Mn-based perovskite via defect engineering, over which the catalytic activity of propane combustion was significantly enhanced. It demonstrates that the oxygen vacancy concentration and the Mn-O bond strength can be efficiently modulated by finely tuning the Ni content in SmNixMn1-xO3 perovskite catalysts (SNxM1-x), which in turn can enhance the redox ability and generate more active oxygen species. The SN0.10M0.90 catalyst with the lowest Mn-O bond strength exhibits the lowest apparent activation energy, over which the propane conversion rate increases by 3.6 times compared to that on the SmMnO3 perovskite catalyst (SM). In addition, a SN0.10M0.90/cordierite monolithic catalyst can also exhibit a remarkable catalytic performance and deliver excellent long-term durability (1000 h), indicating broad prospects in industrial applications. Moreover, the promotional effect of Ni substitution was further unveiled by density functional theory (DFT) calculations. This work brings a favorable guidance for the exploration of highly efficient perovskite catalysts for light alkane elimination.

In-Depth Understanding of the Oxidative Compatibility of Volatile Organic Compounds with Mn2O3 and Pt-Loaded Catalysts

Designing suitable catalysts for efficiently degrading volatile organic compounds (VOCs) is a great challenge due to the distinct variety and nature of VOCs. Herein, the suitability of different typical VOCs (toluene and acetone) over Pt-based catalysts and Mn2O3 was investigated carefully. The activity of Mn2O3 was inferior to Pt-loaded catalysts in toluene oxidation but showed superior ability for destroying acetone, while Pt loading could boost the catalytic activity of Mn2O3 for both acetone and toluene. This suitability could be determined by the physicochemical properties of the catalysts and the structure of the VOC since toluene destruction activity is highly reliant on Pt0 in the metallic state and linearly correlated with the amount of surface reactive oxygen species (Oads), while the crucial factor that affects acetone oxidation is the mobility of lattice oxygen (Olat). The Pt/Mn2O3 catalyst shows highly active Pt-O-Mn interfacial sites, favoring the generation of Oads and promoting Mn-Olat mobility, leading to its excellent performance. Therefore, the design of abundant active sites is an effective means of developing highly adaptive catalysts for the oxidation of different VOCs.

Highly Dispersed Ni Atoms and O3 Promote Room-Temperature Catalytic Oxidation

Transition metal oxides are promising catalysts for catalytic oxidation reactions but are hampered by low room-temperature activities. Such low activities are normally caused by sparse reactive sites and insufficient capacity for molecular oxygen (O2) activation. Here, we present a dual-stimulation strategy to tackle these two issues. Specifically, we import highly dispersed nickel (Ni) atoms onto MnO2 to enrich its oxygen vacancies (reactive sites). Then, we use molecular ozone (O3) with a lower activation energy as an oxidant instead of molecular O2. With such dual stimulations, the constructed O3-Ni/MnO2 catalytic system shows boosted room-temperature activity for toluene oxidation with a toluene conversion of up to 98%, compared with the O3-MnO2 (Ni-free) system with only 50% conversion and the inactive O2-Ni/MnO2 (O3-free) system. This leap realizes efficient room-temperature catalytic oxidation of transition metal oxides, which is constantly pursued but has always been difficult to truly achieve.

Less Is More: Selective-Atom-Removal-Derived Defective MnOx Catalyst for Efficient Propane Oxidation

Defect manipulation in metal oxide is of great importance in boosting catalytic performance for propane oxidation. Herein, a selective atom removal strategy was developed to construct a defective manganese oxide catalyst, which involved the partial etching of a Mg dopant in MnOx. The resulting MgMnOx-H catalysts exhibited superior low-temperature catalytic activity (T50 = 185 °C, T90 = 226 °C) with a propane conversion rate of 0.29 μmol·gcat.-1·h-1 for the propane oxidation reaction, which is 4.8 times that of pristine MnOx. Meanwhile, a robust hydrothermal stability was guaranteed at 250 °C for 30 h of reaction time. The comprehensive experimental characterizations revealed that the catalytic performance improvement was closely related to the defective structures including the abundant (metal and oxygen) vacancies, distorted crystals, valence imbalance, etc., which prominently weakened the Mn-O bond and stimulated the mobility of surface lattice oxygen, leading to the elevation in the intrinsic oxidation activity. This work exemplifies the significance of defect engineering for the promotion of the oxidation ability of metal oxide, which will be valuable for the further development of efficient non-noble metal catalysts for propane oxidation.

Redox-induced controllable engineering of MnO2-MnxCo3-xO4 interface to boost catalytic oxidation of ethane

Multicomponent oxides are intriguing materials in heterogeneous catalysis, and the interface between various components often plays an essential role in oxidations. However, the underlying principles of how the hetero-interface affects the catalytic process remain largely unexplored. Here we report a unique structure design of MnCoOx catalysts by chemical reduction, specifically for ethane oxidation. Part of the Mn ions incorporates with Co oxides to form spinel MnxCo3-xO4, while the rests stay as MnO2 domains to create the MnO2-MnxCo3-xO4 interface. MnCoOx with Mn/Co ratio of 0.5 exhibits an excellent activity and stability up to 1000 h under humid conditions. The synergistic effects between MnO2 and MnxCo3-xO4 are elucidated, in which the C2H6 tends to be adsorbed on the interfacial Co sites and subsequently break the C-H bonds on the reactive lattice O of MnO2 layer. Findings from this study provide valuable insights for the rational design of efficient catalysts for alkane combustion.

Machine-Learning-Assisted Descriptors Identification for Indoor Formaldehyde Oxidation Catalysts

The development of highly efficient catalysts for formaldehyde (HCHO) oxidation is of significant interest for the improvement of indoor air quality. Up to 400 works relating to the catalytic oxidation of HCHO have been published to date; however, their analysis for collective inference through conventional literature search is still a challenging task. A machine learning (ML) framework was presented to predict catalyst performance from experimental descriptors based on an HCHO oxidation catalysts database. MnOx, CeO2, Co3O4, TiO2, FeOx, ZrO2, Al2O3, SiO2, and carbon-based catalysts with different promoters were compiled from the literature. Notably, 20 descriptors including reaction catalyst composition, reaction conditions, and catalyst physical properties were collected for data mining (2263 data points). Furthermore, the eXtreme Gradient Boosting algorithm was employed, which successfully predicted the conversion efficiency of HCHO with an R-square value of 0.81. Shapley additive analysis suggested Pt/MnO2 and Ag/Ce-Co3O4 exhibited excellent catalytic performance of HCHO oxidation based on the analysis of the entire database. Validated by experimental tests and theoretical simulations, the key descriptor identified by ML, i.e., the first promoter, was further described as metal-support interactions. This study highlights ML as a useful tool for database establishment and the catalyst rational design strategy based on the importance of analysis between experimental descriptors and the performance of complex catalytic systems.

Activating Inert Crystal Face via Facet-Dependent Quench-Engineering for Electrocatalytic Water Oxidation

Developing a facile strategy to activate the inert crystal face of an electrocatalyst is critical to full-facet utilization, yet still challenging. Herein, the electrocatalytic activity of the inert crystal face is activated by quenching Co3O4 cubes and hexagonal plates with different crystal faces in Fe(NO3)3 solution, and the regulation mechanism of facet-dependent quench-engineering is further revealed. Compared to the Co3O4 cube with exposed {100} facet, the Co3O4 hexagonal plate with exposed {111} facet is more responsive to quenching, accompanied by a rougher surface, richer defect, and more Fe doping. Theoretical calculations indicate that the {111} facet has a more open structure with lower defect formation energy and Fe doping energy, ensuring its electronic and coordination structure is easier to optimize. Therefore, quench-engineering largely increases the catalytic activity of {111) facet for oxygen evolution reaction by 13.2% (the overpotential at 10 mA cm-2 decreases from 380 to 330 mV), while {100} facet only increases by 7.6% (from 393 to 363 mV). The quenched Co3O4 hexagonal plate exhibits excellent electrocatalytic activity and stability in both zinc-air battery and water-splitting. The work reveals the influence mechanism of crystal face on quench-engineering and inspires the activation of the inert crystal face.

Cooperative and Bifunctional Adsorbent-Catalyst Materials for In-situ VOCs Capture-Conversion

Volatile organic compounds (VOCs) are gases that are emitted into the air from products or processes and are major components of air pollution that significantly deteriorate air quality and seriously affect human health. Different types of metals, metal oxides, mixed-metal oxides, polymers, activated carbons, zeolites, metal-organic frameworks (MOFs) and mixed-matrixed materials have been developed and used as adsorbent or catalyst for diversified VOCs detection, removal, and destruction. In this comprehensive review, we first discuss the general classification of VOCs removal materials and processes and outline the historical development of bifunctional and cooperative adsorbent-catalyst materials for the removal of VOCs from air. Subsequently, particular attention is devoted to design of strategies for cooperative adsorbent-catalyst materials, along with detailed discussions on the latest advances on these bifunctional materials, reaction mechanisms, long-term stability, and regeneration for VOCs removal processes. Finally, challenges and future opportunities for the environmental implementation of these bifunctional materials are identified and outlined with the intent of providing insightful guidance on the design and fabrication of more efficient materials and systems for VOCs removal in the future.

Regulating Ir-O Covalency to Boost Acidic Oxygen Evolution Reaction

The unsatisfactory oxygen evolution reaction (OER) activity of IrO2 has intensively raised the cost and energy consumption of hydrogen generation from proton exchange membrane water electrolyzers. Here, the acidic OER activity of the rutile IrO2 is significantly enhanced by the incorporation of trivalent metals (e.g., Gd, Nd, and Pr) to increase the Ir-O covalency, while the high-valence (pentavalent or higher) metal incorporation decreases the Ir-O covalency resulting in worse OER activity. Experimental and theoretical analyses indicate that enhanced Ir-O covalency activates lattice oxygen and triggers lattice oxygen-mediated mechanism to enhance OER kinetics, which is verified by the finding of a linear relationship between the natural logarithm of intrinsic activity and Ir-O covalency described by charge transfer energy. By regulating the Ir-O covalency, the obtained Gd-IrO2-δ merely needs 260 mV of overpotential to reach 10 mA cm-2 and shows impressive stability during a 200-h test in 0.5 м H2SO4. This work provides an effective strategy for significantly enhancing the OER activity of the widely used IrO2 electrocatalysts through the rational regulation of Ir-O covalency.

Different crystalline manganese dioxide and biochar co-conditioning aerobic composting: Reduced ammonia volatilization and improved organic fertilizer quality

Aerobic composting is a sustainable and effective waste disposal method. However, it can generate massive amounts of ammonia (NH3) via volatilization. Effectively reducing NH3 volatilization is vital for advancing aerobic composting and protecting the ecological environment. Herein, two crystal types of MnO2 (α-MnO2 and δ-MnO2) are combined with biochar (hydrochar (WHC) and pyrochar (WPC), respectively) and used as conditioners for the aerobic composting of chicken manure. Results reveal that α-MnO2 (34.6%) can more effectively reduce NH3 accumulation than δ-MnO2 (27.1%). Moreover, the combination of WHC and MnO2 better reduces NH3 volatilization (48.5-58.9%) than the combination of WPC and MnO2 (15.8-40.1%). The highest NH3 volatilization reduction effect (58.9%) is achieved using the combination of WHC and δ-MnO2. Because the added WHC and δ-MnO2 promote the humification of the compost, the humic acid to fulvic acid ratio (HA/FA ratio) dramatically increases. The combination of WHC and δ-MnO2 doubled the HA/FA ratio and resulted in a net economic benefit of 130.0 RMB/t. Therefore, WHC and δ-MnO2 co-conditioning can promote compost decomposition, improving the quality of organic fertilizers and substantially reducing NH3 volatilization.

Strong metal oxide-zeolite interactions during selective catalytic reduction of nitrogen oxides

In response to the stricter EU VII emission standards and the "150 ℃ challenge", selective catalytic reduction by ammonia (NH3-SCR) catalysts for motor vehicles are required to achieve high NO conversion below 200 °C. Compounding metal oxides with zeolites is an important strategy to design the low-temperature SCR catalysts. Here, we original prepared Cu-SSZ-13 @ MnGdOx (Cu-Z @ MGO), which achieved over 90% NO conversion and 95% N2 selectivity at 150 ℃. It has been demonstrated that a uniform mesoporous loaded layer of MGO grows on Cu-Z, and a recrystallization zone appears at the MGO-Cu-Z interface. We discover that the excellent low-temperature SCR activity derives from the strong metal oxide-zeolite interaction (SMZI) effects. The SMZI effects cause the anchor and high dispersion of MGO on the surface of Cu-Z. Driven by the SMZI effects, the Mn3+/Mn4+ redox cycle ensures the low and medium temperature-SCR activity and the Cu2+/Cu+ redox cycle guarantees the medium and high temperature-SCR activity. The introduction of MGO improves the reaction activity of -NH2 species adsorbed at Mn sites at 150 ℃, achieving a cycle of reduction and oxidation reactions at low temperatures. This strategy of inducing SMZI effects of metal oxides and zeolites paves a way for development of high-performance catalysts.

Constructing α-MnO2/Mn2O3 heterojunction for formaldehyde oxidation

Constructing heterojunctions with oxygen defect-rich structures and abundant phase interfaces poses an appealing yet challenging task in the development of non-precious metal oxide catalysts for formaldehyde (HCHO) oxidation. Herein, we present a simple and efficient method for fabricating highly active manganese oxide heterojunction catalysts for HCHO oxidation. This method involves the hydrothermal synthesis of a nanostructured α-MnO2/γ-MnOOH composite, followed by mechanical milling-induce phase transformation of γ-MnOOH to Mn2O3. Importantly, mechanical milling not only creates the heterojunction but also imparts oxygen defect-rich structures and an abundant phase interface to the catalyst. The resulting α-MnO2/Mn2O3 heterojunction exhibits outstanding performance in HCHO oxidation, comparable to the best non-precious metal oxide catalysts reported thus far. It achieves a 100% conversion of 100 ppm HCHO under a gas hourly space velocity of 120 L gcat-1 h-1 at 80 °C, corresponding to a mass-specific reaction rate of 8.92 μmol g-1 min-1 and an area-specific reaction rate of 0.18 μmol m-2 min-1. Based on the control experiments using in situ diffuse reflectance infrared Fourier transform spectroscopy combined with online gas chromatography, we gained insights into the mechanism of HCHO oxidation over the α-MnO2/Mn2O3 catalyst and the functional roles played by its component phases.

Monolithic Catalyst of Ni Foam-Supported MnOx for Boosting Magnetocaloric Oxidation of Toluene

Catalytic oxidation has been considered an effective technique for volatile organic compound degradation. Development of metal foam-based monolithic catalysts coupling electromagnetic induction heating (EMIH) with efficiency and low energy is critical yet challenging in industrial applications. Herein, a Mn18.2-NF monolithic catalyst prepared by electrodeposition exhibited superior toluene catalytic activity under EMIH conditions, and the temperature of 90% toluene conversion decreased by 89 °C compared to that in resistance furnace heating. Relevant characterizations proved that the skin effect induced by EMIH encouraged activation of gaseous oxygen, leading to superior low-temperature redox properties of Mn18.2-NF under the EMIH condition. In situ Fourier transform infrared spectroscopy results showed that skin effect-induced activation of oxidizing species further accelerated the conversion of intermediates. As a result, the Mn18.2-NF monolithic catalyst under EMIH demonstrated remarkable performance for the toluene oxidation, surpassing the conventional nonprecious metal catalyst and other reported monolithic catalysts.

Design of bifunctional ultrathin MnO2 nanofilm with laccase-like activity for sensing environmental pollutants containing phenol groups

Laccase-catalyzed oxidative reactions are increasingly examined as a reliable approach to environmental analysis and remediation, and it is urgent to widen metal category to compensate huge gap in the number of studies on copper- and non-copper laccase mimics. Herein, two-dimensional ultrathin MnO2 nanofilm (Mn-uNF) was designed via a chemical deposition and alkali etching process. Similar to Cu-laccase, Mn-uNF can oxidize phenols via a one-electron-transfer reaction of Mn(III) and accelerate the MnIII/MnIV state cycle through an unconventional oxygen reduction process. The excellent laccase-like performance of Mn-uNF can be ascribed to the abundant atomically dispersed Vo-assisted Mn(III) and surface -OH species, which was confirmed by characterizations and DFT calculation. Further, a facile dual-function colorimetric platform was designed for array sensing of o-, m-, and p-dihydroxybenzene isomers and one-step discrimination of tetracyclines containing phenol groups. These findings provide reasonable guidance for the design of a nanozyme with active Mn sites as a new family member of highly efficient copper-free laccase mimics.

Direct and integrating sampling in terahertz receivers from wafer-scalable InAs nanowires

Terahertz (THz) radiation will play a pivotal role in wireless communications, sensing, spectroscopy and imaging technologies in the decades to come. THz emitters and receivers should thus be simplified in their design and miniaturized to become a commodity. In this work we demonstrate scalable photoconductive THz receivers based on horizontally-grown InAs nanowires (NWs) embedded in a bow-tie antenna that work at room temperature. The NWs provide a short photoconductivity lifetime while conserving high electron mobility. The large surface-to-volume ratio also ensures low dark current and thus low thermal noise, compared to narrow-bandgap bulk devices. By engineering the NW morphology, the NWs exhibit greatly different photoconductivity lifetimes, enabling the receivers to detect THz photons via both direct and integrating sampling modes. The broadband NW receivers are compatible with gating lasers across the entire range of telecom wavelengths (1.2-1.6 μm) and thus are ideal for inexpensive all-optical fibre-based THz time-domain spectroscopy and imaging systems. The devices are deterministically positioned by lithography and thus scalable to the wafer scale, opening the path for a new generation of commercial THz receivers.

Acetone Efficient Degradation under Simulated Humid Conditions by Mn-O-Pt Interaction Taming-Triggered Water Dissociation Intensification

As a generally existing component in industrial streams, H2O usually inhibits the catalytic degradation efficiency of volatile organic compounds (VOCs) greatly. Here, we propose a novel strategy that accelerates the H2O dissociation and facilitates positive feedbacks during VOC oxidation by fabricating citric acid (CA)-assisted Pt(K)-Mn2O3/SiO2 (Pt-Mn/KS-xCA). Results reveal that the complexation of carboxyl groups of citric acid with Mn cations leads to the formation of small Mn2O3 (4.1 ± 0.2 nm) and further enhances the Mn-O-Pt interaction (strengthened by the Si-O-Mn interaction), which can transfer more electrons from Pt-Mn/KS-6CA to H2O, thus facilitating its breaking of covalent bonds. It subsequently produces abundant surface hydroxyl groups, improving the adsorption and activation abilities of acetone reactant and ethanol intermediate. Attributing to these, the acetone turnover frequency value of Pt-Mn/KS-6CA is 1.8 times higher than that of Pt-Mn/KS at 160 °C, and this multiple changes to 6.3 times in the presence of H2O. Remarkably, acetone conversion over Pt-Mn/KS-6CA increases by up to 14% in the presence of H2O; but it decreases by up to 26% for Pt-Mn/KS due to its weak dissociation ability and high adsorption capacity toward H2O. This work sheds new insights into the design of highly efficient catalytic materials for VOC degradation under humid conditions.

Engineering the Crystal Facet of Monoclinic NiO for Efficient Catalytic Ozonation of Toluene

Modulating oxygen vacancies of catalysts through crystal facet engineering is an innovative strategy for boosting the activity for ozonation of catalytic volatile organic compounds (VOCs). In this work, three kinds of facet-engineered monoclinic NiO catalysts were successfully prepared and utilized for catalytic toluene ozonation (CTO). Density functional theory calculations revealed that Ni vacancies were more likely to form preferentially than O vacancies on the (110), (100), and (111) facets of monoclinic NiO due to the stronger Ni-vacancy formation ability, further affecting O-vacancy formation. Extensive characterizations demonstrated that Ni vacancies significantly promoted the formation of O vacancies and thus reactive oxygen species in the (111) facet of monoclinic NiO, among the three facets. The performance evaluation showed that the monoclinic NiO catalyst with a dominant (111) facet exhibits excellent performance for CTO, achieving a toluene conversion of ∼100% at 30 °C after reaction for 120 min under 30 ppm toluene, 210 ppm ozone, 45% relative humidity, and a space velocity of 120 000 h-1. This outperformed the previously reported noble/non-noble metal oxide catalysts used for CTO at room temperature. This study provided novel insight into the development of highly efficient facet-engineered catalysts for the elimination of catalytic VOCs.

Regulating oxygen vacancies and hydroxyl groups of α-MnO2 nanorods for enhancing post-plasma catalytic removal of toluene

Although nonthermal plasma (NTP) technology has high removal efficiency for volatile organic compounds (VOCs), it has limited carbon dioxide (CO2) selectivity, which hinders its practical application. In this study, α-MnO2 nanorods with tunable oxygen vacancies and hydroxyl groups were synthesized by two-step hydrothermal process to enhance their activity for deep oxidation of toluene. Hydrochloric acid (HCl) was used to assist in synthesis of α-MnO2 nanorods with tunable oxygen vacancies, furtherly, more hydroxyl groups were introduced to HCl-assisted synthesized α-MnO2 by K+ supplement. The results showed that the as-synthesized nanorods exhibited superior activity, improved by nearly 30% removal efficiency of toluene compared to pristine MnO2 at SIE = 339 J/L, and reaching high COx selectivity of 72% at SIE = 483 J/L, successfully promoting the deep oxidation of toluene. It was affirmed that oxygen vacancies played an important role in toluene conversion, improving the conversion of ozone (O3) and resulting in higher mobility of surface lattice oxygen species. Besides, the enhancement of deep oxidation performance was caused by the increase of hydroxyl groups concentration. In-situ DRIFTS experiments revealed that the adsorbed toluene on catalyst surface was oxidized to benzyl alcohol by surface lattice oxygen, and hydroxyl groups were also found participating in toluene adsorption. Overall, this study provides a new approach to designing catalysts for deep oxidation of VOCs.

Avoiding Sabatier's Limitation on Spatially Correlated Pt-Mn Atomic Pair Sites for Oxygen Electroreduction

The development of highly active and low-cost oxygen reduction reaction (ORR) catalysts is crucial for the practical application of hydrogen fuel cells. However, the linear scaling relation (LSR) imposes an inherent Sabatier's limitation for most catalysts including the benchmark Pt with an insurmountable overpotential ceiling, impeding the development of efficient electrocatalysts. To avoid such a limitation, using earth-abundant metal oxides with different crystal phases as model materials, we propose an effective and dynamic reaction pathway through constructing spatially correlated Pt-Mn pair sites, achieving an excellent balance between high activity and low Pt loading. Experimental and theoretical calculations demonstrate that manipulating the intermetallic distance and charge distribution of Pt-Mn pairs can effectively promote O-O bond cleavage at these sites through a bridge configuration, circumventing the formation of *OOH intermediates. Meanwhile, the dynamic adsorption configuration transition from the bridge configuration of O2 to the end-on configuration of *OH improves *OH desorption at the Mn site within such pairs, thereby avoiding Sabatier's limitation. The well-designed Pt-Mn/β-MnO2 exhibits outstanding ORR activity and stability with a half-wave potential of 0.93 V and barely any activity degradation for 70 h. When applied to the cathode of a H2-O2 anion-exchange membrane fuel cell, this catalyst demonstrates a high peak power density of 287 mW cm-2 and 500 h of stability under a cell voltage of 0.6 V. This work reveals the adaptive bonding interactions of atomic pair sites with multiple reactant/intermediates, offering a new avenue for rational design of highly efficient atomic-level dispersed ORR catalysts beyond the Sabatier optimum.

Engineering the crystal facets of α-MnO2 nanorods for electrochemical energy storage: experiments and theory

Crystal facet engineering is an effective strategy for precisely regulating the orientations and electrochemical properties of metal oxides. However, the contribution of each crystal facet to pseudocapacitance is still puzzling, which is a bottleneck that restricts the specific capacitance of metal oxides. Herein, α-MnO2 nanorods with different exposed facets were synthesized through a hydrothermal route and applied to pseudocapacitors. XRD and TEM results verified that the exposure ratio of active crystal facets was significantly increased with the assistance of the structure-directing agents. XPS analysis showed that there was more adsorbed oxygen and Mn3+ on the active crystal facets, which can provide strong kinetics for the electrochemical reaction. Consequently, the α-MnO2 nanorods with {110} and {310} facets exhibited much higher pseudocapacitances of 120.0 F g-1 and 133.0 F g-1 than their α-MnO2-200 counterparts (67.5 F g-1). The theoretical calculations proved that the {310} and {110} facets have stronger adsorption capacity and lower diffusion barriers for sodium ions, which is responsible for the enhanced pseudocapacitance of MnO2. This study provides a strategy to enhance the electrochemical performance of metal oxide, based on facet engineering.

Controlled synthesis of Fe3O4/MnO2 (3 1 0)/ZIF-67 composite with enhanced synergetic effects for the highly selective and efficient adsorption of Cu (II) from simulated copperplating effluents

This study designed a composite material with internal synergistic effects among multiple components to achieve highly selective adsorption of Cu (II). Through controlled synthesis, the Fe3O4/MnO2(3 1 0)/ZIF-67 composite was successfully fabricated, leading to significant improvement in adsorption selectivity, capacity, and adsorption rate. The experimental results showed that the composite is of outstanding selectivity in the adsorption of Cu (II), with a partition coefficient K of Cu (II) that was 2.2-5.3 times higher than that of other coexisting ions. Moreover, the composite exhibited a remarkable adsorption capacity of 1261.0 mg g-1 and a fast adsorption rate of 840.7 mg g-1 h-1 at 298 K. Additionally, its magnetic property facilitated easy separation from wastewater, thereby enhancing its potential for commercial applications. The synergetic effect mechanism was analyzed through characterizations and DFT calculations. Furthermore, the recyclability of the composite was investigated, which showed that after seven cycles, the adsorption efficiency remained at 85% of its initial efficiency. It can be concluded that Fe3O4/MnO2(3 1 0)/ZIF-67 has potential to address challenges posed by heavy metal pollution in copperplating effluents.

Insights into the underpinning effect of graphene in Cu1Mn10 on enhancing the low-temperature catalytic activity for CO oxidation

CO emission is a critical issue of industrial processes such as steel-smelting, cement manufacturing, and waste incineration. Catalytic oxidation based on Cu-Mn binary catalysts shows great potential for efficient removal of CO, whereas their practical applicability is limited by the inferior low-temperature catalytic activity and the high catalyst cost owing to a substantial quantity of Cu. In this study, doping graphene is designed to adjust the electron transfer capability to improve the low-temperature catalytic activity as well as reduce the amount of Cu, and thereby Cu1Mn10 catalysts doped with slight amounts of graphene (x%G-Cu1Mn10, x is 1∼5) were fabricated. It was found that the introduction of graphene could form effective electron transport channels to enhance the intermetallic interaction and oxygen vacancy generation, thus improving the low-temperature catalytic performance of the Cu1Mn10 catalyst. Among all the catalysts, 4%G-Cu1Mn10 exhibited the highest activity, achieving CO conversion of 92% at 110 °C at a weight hourly space velocity of 120,000 mL/(g∙h). The introduction of graphene also enabled the catalyst with excellent catalytic activity and stability at a relative humidity of 70%. Attractively, 4%G-Cu1Mn10 can be further loaded into the polyester fabric, presenting great application potentials in the effective elimination of CO during the dust removal process since the flue gas temperature in the dust collector is just around the T90% and the catalyst that is inside of fabric fiber rather than on the fabric surface can be rarely influenced by the dust. In general, doping graphene provides a facile method to enhance the low-temperature activities of the Cu-Mn binary catalysts and cut down the use of valuable Cu, showing great application potential.

Surface oxygen vacancy-dependent molecular oxygen activation for propane combustion over α-MnO2

Oxygen vacancies (OV), as the sites of molecular oxygen adsorption and activation, play an important role in the catalytic combustion process of volatile organic compounds (VOCs). Revealing the relationship between OV concentration and molecular oxygen activation behavior is of significance to construct the efficient catalysts. Herein, α-MnO2 with different OV concentrations was prepared to investigate the molecular oxygen activation for C3H8 combustion. It is disclosed that the enhanced OV concentration in α-MnO2 induced the reconfiguration of surface metal atoms, resulting in the transformation of oxygen activation configuration from end-on mode to side-on mode. Oxygen molecules in side-on mode possessed more localized electron density and weaker coordination bond strength with surrounding Mn atoms, which were more favorable to adsorb C3H8 molecules and activate C-H bond for the improved combustion performance. This work provides a new understanding to reveal that the increased OV concentration contributes to more efficient VOCs combustion.

Surface acidic sites strengthened core-shell HC@MnO2 for enhanced gaseous ammonia adsorption

As a common gaseous pollutant in atmospheric environment, ammonia (NH3) not only contributes to the formation of haze, but also disturb the nitrogen balance in ecosystem through atmospheric nitrogen deposition. Therefore, the control of NH3 emission has important environmental significance. Adsorption is the most commonly used technology for NH3 purification in practice, and efficient adsorbents are the key to adsorption method. Herein, a core-shell structured HC@MnO2 adsorbent was constructed by in-situ growth of layered δ-MnO2 on hydrochar (HC) surface, and its surface acidic sites were further strengthened. The enhancement of surface acidic sites significantly improved the adsorption performance of HC@MnO2 for NH3, reaching 34.49 mg NH3/g, which was superior to commercial carbon-based materials (whose adsorption capacity was 8.47 times that of Coal-based activated carbon, 14.25 times that of Coconut shell activated carbon, and 12.77 times that of Bamboo charcoal). Moreover, the operating parameters and adsorption kinetics were detailly investigated. The adsorption of HC@MnO2 on NH3 was in accordance with pseudo-second-order adsorption kinetics model. Large surface area of core-shell structure and abundant surface acidic sites of δ-MnO2 are the decisive reasons for the excellent adsorption performance of HC@MnO2. Importantly, the enhancement of surface stronger Brønsted acidic sites is the key to improve NH3 adsorption performance of HC@MnO2. Finally, the thermal regeneration and recycling performance of HC@MnO2-H were also investigated. This study provides a suggestive for further research on low-cost composite materials with excellent NH3 adsorption performance.

Synergistic Trimetallic Nanocomposites as Visible-NIR-Sunlight-Driven Photocatalysts for Efficient Artificial Photosynthesis

Here, we report monodispersed tricomponent MnNSs-SnO2@Pt and MnNFs-SnO2@Pt nanocomposites prepared by simultaneous SnO2 and Pt nanodot coating on Mn nanospheres (MnNSs) and Mn nanoflowers (MnNFs) for highly efficient CO2 photoreduction in visible-NIR-sunlight irradiation. MnNFs-SnO2@Pt showed higher efficiency with a quantum yield of 3.21% and a chemical yield of 5.45% for CO2 conversion under visible light irradiation for HCOOH formation with 94% selectivity. Similarly, MnNFs-SnO2@Pt displayed significant photocatalytic efficiency in NIR and sunlight irradiation for HCOOH yield. MnNFs-SnO2@Pt nanocomposites also showed robust morphology and sustained structural stability with shelf-life for at least 1 year and were utilized for at least 10 reaction cycles without losing significant photocatalytic efficiency. The high surface area (94.98 m2/g), efficient electron-hole separation, and Pt-nanodot support in MnNFs--SnO2@Pt contributed to a higher photocatalytic efficacy toward CO2 reduction.

Disentangling Local Interfacial Confinement and Remote Spillover Effects in Oxide-Oxide Interactions

Supported oxides are widely used in many important catalytic reactions, in which the interaction between the oxide catalyst and oxide support is critical but still remains elusive. Here, we construct a chemically bonded oxide-oxide interface by chemical deposition of Co3O4 onto ZnO powder (Co3O4/ZnO), in which complete reduction of Co3O4 to Co0 has been strongly impeded. It was revealed that the local interfacial confinement effect between Co oxide and the ZnO support helps to maintain a metastable CoOx state in CO2 hydrogenation reaction, producing 93% CO. In contrast, a physically contacted oxide-oxide interface was formed by mechanically mixing Co3O4 and ZnO powders (Co3O4-ZnO), in which reduction of Co3O4 to Co0 was significantly promoted, demonstrating a quick increase of CO2 conversion to 45% and a high selectivity toward CH4 (92%) in the CO2 hydrogenation reaction. This interface effect is ascribed to unusual remote spillover of dissociated hydrogen species from ZnO nanoparticles to the neighboring Co oxide nanoparticles. This work clearly illustrates the equally important but opposite local and remote effects at the oxide-oxide interfaces. The distinct oxide-oxide interactions contribute to many diverse interface phenomena in oxide-oxide catalytic systems.

Enhancing polyol/sugar cascade oxidation to formic acid with defect rich MnO2 catalysts

Oxidation of renewable polyol/sugar into formic acid using molecular O₂ over heterogeneous catalysts is still challenging due to the insufficient activation of both O₂ and organic substrates on coordination-saturated metal oxides. In this study, we develop a defective MnO₂ catalyst through a coordination number reduction strategy to enhance the aerobic oxidation of various polyols/sugars to formic acid. Compared to common MnO₂, the tri-coordinated Mn in the defective MnO₂ catalyst displays the electronic reconstruction of surface oxygen charge state and rich surface oxygen vacancies. These oxygen vacancies create more Mn^δ+ Lewis acid site together with nearby oxygen as Lewis base sites. This combined structure behaves much like Frustrated Lewis pairs, serving to facilitate the activation of O₂, as well as C-C and C-H bonds. As a result, the defective MnO₂ catalyst shows high catalytic activity (turnover frequency: 113.5 h^-1) and formic acid yield (>80%) comparable to noble metal catalysts for glycerol oxidation. The catalytic system is further extended to the oxidation of other polyols/sugars to formic acid with excellent catalytic performance.

Preparation of a Novel Formaldehyde-Free Impregnated Decorative Paper Containing MnO2 Nanoparticles for Highly Efficient Formaldehyde Removal

The loading of catalytic manganese dioxide (MnO₂) nanoparticles onto an impregnated decorative paper has been an effective method for the removal of indoor formaldehyde (HCHO) pollutants. However, its preparation can present numerous challenges, including instability in dipping emulsions and leaching. In this investigation, a novel and stable formaldehyde-free polyacrylate dipping emulsion containing MnO₂ particles was prepared and then back-coated on a decorative paper. To improve the dispersion and fixation, the MnO₂ was modified with silane. HCHO can undergo physical adsorption on the cellulosic fibers present in the paper, while it can also undergo chemical degradation into CO₂ within the MnO₂ groups. The silane not only enhanced the interfacial adhesion to a polyacrylate resin but also increased the interlayer distance, thereby creating a larger space for HCHO absorption. The impregnated decorative paper back-coated with 10 wt % of silane-modified MnO₂ exhibited a removal efficiency of approximately 90% for HCHO at 20 °C. The removal rate further improved to approximately 100% when the temperature was increased to 60 °C. Moreover, it is worth noting that the release of volatile organic compounds was exceptionally minimal. Additionally, the particleboard bonded with this impregnated decorative paper exhibited an extremely low emission of HCHO, with a value that approached 0 mg·L^-1. Furthermore, the bonding strength of the surface remained unaffected. Therefore, this study provides a simple and eco-friendly method for effectively removing HCHO, which can enhance indoor air quality.