Self-Supported Earth-Abundant Nanoarrays as Efficient and Robust Electrocatalysts for Energy-Related Reactions

Insightful Understanding of Synergistic Oxygen Reduction on PtCo3(111) Toward Zinc-Air Batteries

Theory-guided materials design is an effective strategy for designing catalysts with high intrinsic activity whilst minimizing the usage of expensive metals like platinum. As proof-of-concept, herein it demonstrates that using density functional theory (DFT) calculations and experimental validation that intermetallic PtCo3 alloy nanoparticles offer enhanced electrocatatalytic performance for the oxygen reduction reaction (ORR) compared to Pt nanoparticles. DFT calculations established that PtCo3(111) surfaces possess better intrinsic ORR activity compared to Pt(111) surfaces, owing to the synergistic action of adjacent Pt and Co active sites which optimizes the binding strength of ORR intermediates to boost overall ORR kinetics. With this understanding, a PtCo3/NC catalyst, comprising PtCo3 nanoparticles exposing predominantly (111) facets dispersed on an N-doped carbon support, is successfully fabricated. PtCo3/NC demonstrates a high specific activity (3.4 mA cm-2 mgPt -1), mass activity (0.67 A mgPt -1), and cycling stability for the ORR in 0.1 M KOH, significantly outperforming a commercial 20 wt.% Pt/C catalyst. Moreover, a zinc-air battery (ZAB) assembled with PtCo3/NC as the air-electrode catalyst delivered an open-circuit voltage of 1.47 V, a specific capacity of 775.1 mAh gZn -1 and excellent operation durability after 200 discharge/charge cycles, vastly superior performance to a ZAB built using commercial Pt/C+IrO2 as the air-electrode catalyst.

Scalable Design of Ru-Embedded Carbon Fabric Using Conventional Carbon Fiber Processing for Robust Electrocatalysts

Metal-carbon composites are extensively utilized as electrochemical catalysts but face critical challenges in mass production and stability. We report a scalable manufacturing process for ruthenium surface-embedded fabric electrocatalysts (Ru-SFECs) via conventional fiber/fabric manufacturing. Ru-SFECs have excellent catalytic activity and stability toward the hydrogen evolution reaction, exhibiting a low overpotential of 11.9 mV at a current density of 10 mA cm-2 in an alkaline solution (1.0 M aq KOH solution) with only a slight overpotential increment (6.5%) after 10,000 cycles, whereas under identical conditions, that of commercial Pt/C increases 6-fold (from 1.3 to 7.8 mV). Using semipilot-scale equipment, a protocol is optimized for fabricating continuous self-supported electrocatalytic electrodes. Tailoring the fiber processing parameters (tension and temperature) can optimize the structural development, thereby achieving good catalytic performance and mechanical integrity. These findings underscore the significance of self-supporting catalysts, offering a general framework for stable, binder-free electrocatalytic electrode design.

A microelectrode electrochemical sensing platform based on heteroatoms doped carbon nanotubes arrays with peroxidase-like activity for in-situ detection in live cell

In this work, we developed a new strategy to fabricate a series of transition metallic nanoparticles (NPs) embedded on B, N co-doped carbon nanotubes (CNTs) arrays modified flexible carbon fiber electrodes (M@BNCNTs/CF, M = Co, Fe, Ni) via facile inkjet printing assisted with chemical vapor deposition using Ionic liquid as solvent of printing ink and heteroatom dopants. Furthermore, Pt NPs via impregnation-thermal reduction process was anchored on the surface of Co@BNCNTs/CF (Pt-Co@BNCNTs/CF), which holds enhanced peroxidase-like activity and could be directly used as freestanding electrode to detect H2O2, exhibiting a low detection limit of 0.19 μM with wide linear range (0.5 μM-9.4 mM), and high sensitivity (1679 μA cm-2 mM-1). The excellent sensing performance of Pt-Co@BNCNTs/CF is attributed to the Pt, Co NPs anchored on CNTs with great catalytic activity, and the doping B, N would cause graphitic carbon with more defects to improve its inherent reactivity toward H2O2. Besides, CNTs arrays with high surface area also enlarge the exposure of active sites. Moreover, the Pt-Co@NBCNTs/CF microelectrode has been successfully applied in monitoring H2O2 secreted from human colonic cancer cells and normal colonic epithelial cells, which could offer crucial data for distinguishing various cell types and identifying cancer cells from normal cells. This work opens a new horizon to fabricate flexible miniaturized sensing device for extracellular analysis and offers an extended strategy to fabricate other metallic NPs embedded in heteroatoms doped CNTs functionalized flexible fiber electrode, by choosing diverse metal ions and ILs as inkjet printing precursors.

Recent progress in hierarchical nanostructures for Ni-based industrial-level OER catalysts

Exploring efficient and low-cost oxygen evolution reaction (OER) electrocatalysts reaching the industrial level current density is crucial for hydrogen production via water electrolysis. In this feature article, we summarize the recent progress in hierarchical nanostructures for the industrial-level OER. The contents mainly concern (i) the design of a hierarchical structure; (ii) a Ni-based hierarchical structure for the industrial current density OER; and (iii) the surface reconstruction of the hierarchical structure during the OER process. The work provides valuable guidance and insights for the manufacture of hierarchical nanomaterials and devices for industrial applications.

Electrochemical Sensors Based on Transition Metal Materials for Phenolic Compound Detection

Electrochemical sensors have been recognized as crucial tools for monitoring comprehensive chemical information, especially in the detection of a significant class of molecules known as phenolic compounds. These compounds can be present in water as hazardous analytes and trace contaminants, as well as in living organisms where they regulate their metabolism. The sensitive detection of phenolic compounds requires highly efficient and cost-effective electrocatalysts to enable the development of high-performance sensors. Therefore, this review focuses on the development of advanced materials with excellent catalytic activity as alternative electrocatalysts to conventional ones, with a specific emphasis on transition metal-based electrocatalysts for the detection of phenolic compounds. This research is particularly relevant in diverse sectors such as water quality, food safety, and healthcare.

Metal-Organic-Framework-Based Nanoarrays for Oxygen Evolution Electrocatalysis

The development of highly active and stable electrode materials for the oxygen evolution reaction (OER) is essential for the widespread application of electrochemical energy conversion systems. In recent years, various metal-organic frameworks (MOFs) with self-supporting array structures have been extensively studied because of their high porosity, abundant metal sites, and flexible and adjustable structures. This review provides an overview of the recent progress in the design, preparation, and applications of MOF-based nanoarrays for the OER, beginning with the introduction of the architectural advantages of the nanoarrays and the characteristics of MOFs. Subsequently, the design principles of robust and efficient MOF-based nanoarrays as OER electrodes are highlighted. Furthermore, detailed discussions focus on the composition, structure, and performance of pristine MOF nanoarrays (MOFNAs) and MOF-based composite nanoarrays. On the one hand, the effects of the two components of MOFs and several modification methods are discussed in detail for MOFNAs. On the other hand, the review emphasizes the use of MOF-based composite nanoarrays composed of MOFs and other nanomaterials, such as oxides, hydroxides, oxyhydroxides, chalcogenides, MOFs, and metal nanoparticles, to guide the rational design of efficient OER electrodes. Finally, perspectives on current challenges, opportunities, and future directions in this research field are provided.

Selectively Adsorbed p-Aminothiophenol Molecules Improve the Electrocatalytic and Photo-Electrocatalytic Hydrogen Evolution on Au/TiO2

Electrocatalytic hydrogen evolution reaction (HER) is receiving increasing attention as an effective process to produce clean energy. The commonly used precious metal catalysts can be hybridized with semiconductors to form heterostructures for the improvement of catalytic efficiency and reduction of cost. It will be promising to further improve the efficiency of heterostructure-based nanocatalysts in electrocatalytic and photocatalytic HER using a simple and effective method. Herein, we improve the efficiency of Au/TiO2 in electrocatalytic and photo-electrocatalytic HER by selectively adsorbing p-aminothiophenol (PATP) molecules. The PATP molecules are adsorbed on the gold surface by using a simple solution-based method and favor the charge separation at the Au-TiO2 interface. We also compare the PATP molecules with other thiophenol molecules in the enhancement of electrocatalytic HER. The PATP-induced enhancement in electrocatalysis is then further investigated by density functional theory (DFT) calculations, and this enhancement is attributed to a reduction in Gibbs energy of adsorbed hydrogen after surface adsorption of PATP molecules. This work provides a simple, cost-effective, and highly efficient approach to improve the electrocatalytic and photo-electrocatalytic efficiency of Au/TiO2, and this approach could be easily extended to other heterostructure-based nanocatalysts for performance enhancement and may be used in many other catalytic reactions.

Electrospun CuCoN0.6 coating necklace-like N-doped carbon nanofibers for high performance lithium-sulfur batteries

Freestanding electrodes with high energy density and cycle stability have attracted attention on the development of lithium-sulfur (Li-S) batteries. However, both severe shuttle effect and sluggish conversion kinetics hinder their practical applications. Herein, we employed the electrospinning and subsequent nitridation processes to prepare a necklace-like structure of CuCoN_0.6 nanoparticles anchored on N-doped carbon nanofibers (CuCoN_0.6/NC) as freestanding sulfur host for Li-S batteries. Such bimetallic nitride boosts chemical adsorption and catalytic activity throughout detailed theoretical calculation and experimental electrochemical characterization. The three-dimensional conductive necklace-like framework could provide abundant cavities for realizing high sulfur utilization and alleviating the volume variation, as well as fast lithium-ions diffusion and electron transfer. The Li-S cell with the S@CuCoN_0.6/NC cathode delivers a stable cycling performance with a capacity attenuation rate of 0.076% per cycle after 150cycles at 2.0C and an exceptional capacity retention of 657 mAh g^-1 even at a high sulfur loading of 6.8 mg cm^-2 over 100cycles. The facile and scalable method can help promote the widespread application of fabrics.

Oxyanion Engineering Suppressed Iron Segregation in Nickel-Iron Catalysts Toward Stable Water Oxidation

Nickel-iron catalysts represent an appealing platform for electrocatalytic oxygen evolution reaction (OER) in alkaline media because of their high adjustability in components and activity. However, their long-term stabilities under high current density still remain unsatisfactory due to undesirable Fe segregation. Herein, a nitrate ion (NO₃ ^- ) tailored strategy is developed to mitigate Fe segregation, and thereby improve the OER stability of nickel-iron catalyst. X-ray absorption spectroscopy combined with theoretical calculations indicate that introducing Ni₃ (NO₃ )₂ (OH)₄ with stable NO₃ ^- in the lattice is conducive to constructing the stable interface of FeOOH/Ni₃ (NO₃ )₂ (OH)₄ via the strong interaction between Fe and incorporated NO₃ ^- . Time of flight secondary ion mass spectrometry and wavelet transformation analysis demonstrate that the NO₃ ^- tailored nickel-iron catalyst greatly alleviates Fe segregation, exhibiting a considerably enhanced long-term stability with a six-fold improvement over FeOOH/Ni(OH)₂ without NO₃ ^- modification. This work represents a momentous step toward regulating Fe segregation for stabilizing the catalytic performances of nickel-iron catalysts.

Flower-Like Amorphous MoO3- x Stabilized Ru Single Atoms for Efficient Overall Water/Seawater Splitting

Benefitting from the maximum atom utilization efficiency, special size quantum effects and tailored active sites, single-atom catalysts (SACs) have been promising candidates for bifunctional catalysts toward water splitting. Besides, due to the unique structure and properties, some amorphous materials have been found to possess better performance than their crystalline counterparts in electrocatalytic water splitting. Herein, by combining the advantages of ruthenium (Ru) single atoms and amorphous substrates, amorphous molybdenum-based oxide stabilized single-atomic-site Ru (Ru SAs-MoO_{3- x} /NF) catalysts are conceived as a self-supported electrode. By virtue of the large surface area, enhanced intrinsic activity and fast reaction kinetics, the as-prepared Ru SAs-MoO_{3- x} /NF electrode effectively drives both oxygen evolution reaction (209 mV @ 10 mA cm^-2 ) and hydrogen evolution reaction (36 mV @ 10 mA cm^-2 ) in alkaline media. Impressively, the assembled electrolyzer merely requires an ultralow cell voltage of 1.487 V to deliver the current density of 10 mA cm^-2 . Furthermore, such an electrode also exhibits a great application potential in alkaline seawater electrolysis, achieving a current density of 100 mA cm^-2 at a low cell voltage of 1.759 V. In addition, Ru SAs-MoO_{3- x} /NF only has very small current density decay in the long-term constant current water splitting test.

Recent Advances in Water-Splitting Electrocatalysts Based on Electrodeposition

Green hydrogen is being considered as a next-generation sustainable energy source. It is created electrochemically by water splitting with renewable electricity such as wind, geothermal, solar, and hydropower. The development of electrocatalysts is crucial for the practical production of green hydrogen in order to achieve highly efficient water-splitting systems. Due to its advantages of being environmentally friendly, economically advantageous, and scalable for practical application, electrodeposition is widely used to prepare electrocatalysts. There are still some restrictions on the ability to create highly effective electrocatalysts using electrodeposition owing to the extremely complicated variables required to deposit uniform and large numbers of catalytic active sites. In this review article, we focus on recent advancements in the field of electrodeposition for water splitting, as well as a number of strategies to address current issues. The highly catalytic electrodeposited catalyst systems, including nanostructured layered double hydroxides (LDHs), single-atom catalysts (SACs), high-entropy alloys (HEAs), and core-shell structures, are intensively discussed. Lastly, we offer solutions to current problems and the potential of electrodeposition in upcoming water-splitting electrocatalysts.

3D Hierarchical-Architectured Nanoarray Electrode for Boosted and Sustained Urea Electro-Oxidation

Exploring active and durable Ni-based materials with optimized electronic and architectural engineering to promote the urea oxidation reaction (UOR) is pivotal for the urea-related technologies. Herein a 3D self-supported hierarchical-architectured nanoarray electrode (CC/MnNi@NC) is proposed in which 1D N-doped carbon nanotubes (N-CNTs) with 0D MnNi nanoparticles (NPs) encapsulation are intertwined into 2D nanosheet aligned on the carbon cloth for prominently boosted and sustained UOR electrocatalysis. From combined experimental and theoretical investigations, Mn-alloying can regulate Ni electronic state with downshift of the d-band center, facilitating active Ni³⁺ species generation and prompting the rate-determining step (*COO intermediate desorption). Meanwhile, the micro/nano-hierarchical nanoarray configuration with N-CNTs encapsulating MnNi NPs can not only endow strong operational durability against metal corrosion/agglomeration and enrich the density of active sites, but also accelerate electron transfer, and more intriguingly, promote mass transfer as a result of desirable superhydrophilic and quasi-superaerophobic characteristics. Therefore, with such elegant integration of 0D, 1D and 2D motifs into 3D micro/nano-hierarchical architecture, the resulting CC/MnNi@NC can deliver admirable UOR performance, favorably comparable to the best-performing UOR electrocatalysts reported thus far. This work opens a fresh prospect in developing advanced electrocatalysts via electronic manipulation coupled with architectural engineering for various energy conversion technologies.

Directional editing of self-supported nanoarray electrode for adaptive paired-electrolysis

Anodic oxidation assisted hydrogen production under mild conditions powered by renewable electricity represents a sustainable approach to energy conversion systems. Here, we fabricated a versatile and universal self-supported nanoarray platform that can be intelligently edited to achieve adaptive electrocatalysis for alcohol oxidation reactions and hydrogen evolution reaction (HER). The obtained self-supported nanoarray electrocatalysts exhibit excellent catalytic activity due to the integration of multiple merits of rich nanointerface-reconstruction and self-supported hierarchical structures. Particularly, the membrane-free pair-electrolysis system coupling HER and ethylene glycol oxidation reaction (EGOR) required an applied voltage of only 1.25 V to drive the current density of 10 mA cm^-2, which is about 510 mV lower than that of the overall water splitting, showing the capability to simultaneously produce H₂ and formate with high Faradic efficiency and stability. This work demonstrates a catalytic self-supported nanoarray platform for energy-efficient production of high-purity H₂ and value-added chemicals.

Nanostructure Engineering and Electronic Modulation of a PtNi Alloy Catalyst for Enhanced Oxygen Reduction Electrocatalysis in Zinc-Air Batteries

PtNi nanoalloys have demonstrated electrocatalysis superior to that of benchmark Pt/C catalysts for the oxygen reduction reaction (ORR), yet the underlying mechanisms remain underexplored. Herein, a PtNi/NC catalyst comprising PtNi nanoparticles (∼5.2 nm in size) dispersed on N-doped carbon frameworks was prepared using a simple pyrolysis strategy. Benefiting from the individual components and a hierarchical structure, the PtNi/NC catalyst exhibited outstanding ORR activity and stability (E_1/2 = 0.82 V vs RHE and 8 mV negative shift after 20000 cycles), outperforming a commercial 20 wt % Pt/C catalyst (E_1/2 = 0.81 V and 32 mV negative shift). A prototype zinc-air battery constructed using PtNi/NC as the air electrode catalyst achieved highly enhanced electrochemical performance, outperforming a battery constructed using Pt/C as the ORR catalyst. Density functional theory calculations revealed that the improved ORR activity of the PtNi nanoalloys originated from charge redistribution with a suitable metal d-band center to promote the formation of the ORR intermediates.

Accelerating Electrochemical Water Oxidation Activity by Tailoring Morphology and Electronic Structure of Nickel Organic Framework Nanoarrays with a Fe Etching Effect

Fe-mediated nickel organic framework nanoarrays (NiFe-MOFs NAs) on carbon cloth were successfully constructed from ultrathin nanosheets via an etching effect. This strategy also combined the dissolution and coordination effect of acidic ligand (2,6-naphthalenedicarboxylic acid, NDC) to a self-sacrificial template of Ni(OH)₂ NAs. Benefiting from the strong Fe etching effect, dense and thick brick-like Ni-NDC nanoplates were tailored into loose and ultrathin NiFe-NDC nanosheets with abundant squamous nanostructures, which were still tightly attached to carbon cloth. As a consequence, more coordinatively unsaturated metal sites (CUMSs) that served as active centers were exposed to accelerate oxygen production. Meanwhile, the electronic structure of active Ni centers was modulated by the incorporation of Fe atoms. The charge density redistribution between Ni and Fe ultimately optimized the energy barrier of the adsorption/desorption of oxygenated intermediates, promoting the kinetics for water oxidation.

Acceleration of the semi-hydrogenation of alkynes over an N-doped porous carbon sphere-confined ultrafine PdCu bimetallic nanoparticle catalyst

Selective hydrogenation of alkynes to obtain alkenes is a key reaction in petrochemical and fine chemical industries. However, the development of stable and highly selective catalysts with uniformly dispersed active sites is still immensely challenging for the semi-hydrogenation of alkynes. In this study, N-doped porous carbon nanospheres (NPCNs) were synthesized by the nanoemulsion self-assembly and subsequently carbonization method. Ultrafine PdCu bimetallic nanoparticles (NPs) were uniformly dispersed and immobilized on NPCNs. The obtained PdCu/NPCNs catalyst exhibited an open framework and abundant active sites originating from ultrafine PdCu NPs. In the semi-hydrogenation of alkynes, the PdCu/NPCNs catalyst exhibited a remarkable performance and stability, outperforming most of the classical catalysts. The excellent performance was related to the introduction of a secondary metal Cu, which can regulate the electronic state of Pd active sites to further enhance the hydrogenation activity and selectivity. Hence, the facile approach reported herein may be useful for constructing highly dispersed bimetallic NP-based catalysts for selective hydrogenation of alkynes in the petrochemical industry.

Oriented intergrowth of the catalyst layer in membrane electrode assembly for alkaline water electrolysis

The application of membrane electrode assemblies is considered a promising approach for increasing the energy efficiency of conventional alkaline water electrolysis. However, previous investigations have mostly focused on improving membrane conductivity and electrocatalyst activity. This study reports an all-in-one membrane electrode assembly obtained by de novo design. The introduction of a porous membrane readily enables the oriented intergrowth of ordered catalyst layers using solvothermal methods, leading to the formation of an all-in-one MEA for alkaline water electrolysis. This all-in-one MEA features ordered catalyst layers with large surface areas, a low-tortuosity pore structure, integrated catalyst layer/membrane interfaces, and a well-ordered OH^- transfer channel. Owing to this design, a high current density of 1000 mA cm^-2 is obtained at 1.57 V in 30 wt% KOH, resulting in a 94% energy efficiency. This work highlights the prospects of all-in-one membrane electrode assemblies in designing next-generation high-performance alkaline water electrolysis.

Ni5P4-NiP2-Ni2P Nanocomposites Tangled with N-Doped Carbon for Enhanced Electrochemical Hydrogen Evolution in Acidic and Alkaline Solutions

Heterostructured non-precious metal phosphides have attracted increasing attention in the development of high-performance catalysts for hydrogen evolution reaction (HER), particularly in acidic media. Herein, a catalyst composed of ternary Ni5P4-NiP2-Ni2P nanocomposites and N-doped carbon nanotubes/carbon particulates (Ni5P4-NiP2-Ni2P/NC) was prepared from a Ni-containing hybrid precursor through approaches of a successive carbonization and phosphating reaction. Benefiting from the synergistic effect from three-component nickel phosphides and the support role of porous carbon network, the Ni5P4-NiP2-Ni2P/N-doped carbon catalyst presents the promising HER performance with overpotentials of 168 and 202 mV at the current density of 10 mA cm−2 and Tafel slopes of 69.0 and 74 mV dec−1 in both acidic and alkaline solutions, respectively, which surpasses the Ni2P/N-doped carbon counterpart. This work provides an effective strategy for the preparation and development of highly efficient HER non-precious metal electrocatalysts by creating heterostructure in acidic and alkaline media.

Recent Advances in Self-Supported Semiconductor Heterojunction Nanoarrays as Efficient Photoanodes for Photoelectrochemical Water Splitting

Growth of semiconductor heterojunction nanoarrays directly on conductive substrates represents a promising strategy toward high-performance photoelectrodes for photoelectrochemical (PEC) water splitting. By controlling the growth conditions, heterojunction nanoarrays with different morphologies and semiconductor components can be fabricated, resulting in greatly enhanced light-absorption properties, stabilities, and PEC activities. Herein, recent progress in the development of self-supported heterostructured semiconductor nanoarrays as efficient photoanode catalysts for water oxidation is reviewed. Synthetic methods for the fabrication of heterojunction nanoarrays with specific compositions and structures are first discussed, including templating methods, wet chemical syntheses, electrochemical approaches and chemical vapor deposition (CVD) methods. Then, various heterojunction nanoarrays that have been reported in recent years based on particular core semiconductor scaffolds (e.g., TiO₂ , ZnO, WO₃ , Fe₂ O₃ , etc.) are summarized, placing strong emphasis on the synergies generated at the interface between the semiconductor components that can favorably boost PEC water oxidation. Whilst strong progress has been made in recent years to enhance the visible-light responsiveness, photon-to-O₂ conversion efficiency and stability of photoanodes based on heterojunction nanoarrays, further advancements in all these areas are needed for PEC water splitting to gain any traction alongside photovoltaic-electrochemical (PV-EC) systems as a viable and cost-effective route toward the hydrogen economy.

Recent advances in metallic transition metal dichalcogenides as electrocatalysts for hydrogen evolution reaction

Layered metallic transition metal dichalcogenides (MTMDs) exhibit distinctive electrical and catalytic properties to drive basal plane activity, and, therefore, they have emerged as promising alternative electrocatalysts for sustainable hydrogen evolution reactions (HERs). A key challenge for realizing MTMDs-based electrocatalysts is the controllable and scalable synthesis of high-quality MTMDs and the development of engineering strategies that allow tuning their electronic structures. However, the lack of a method for the direct synthesis of MTMDs retaining the structural stability limits optimizing the structural design for the next generation of robust electrocatalysts. In this review, we highlight recent advances in the synthesis of MTMDs comprising groups VB and VIB and various routes for structural engineering to enhance the HER catalytic performance. Furthermore, we provide insight into the potential future directions and the development of MTMDs with high durability as electrocatalysts to generate green hydrogen through water-splitting technology.

Emerging Heterogeneous Supports for Efficient Electrocatalysis

Electrocatalysis plays a fundamental role in many fields, such as metallurgy, medicine, chemical industry, and energy conversion. Anchoring active electrocatalysts with controllable loading and uniform dispersion onto suitable supports has become an attractive topic. This is because the supports can not only have the potential to improve catalytic activity and stability through the interaction between support and catalytic center, but also can reduce precious metal consumption by improving atomic utilization. Herein, recent theoretical and experimental progresses concerning the development of supports to anchor electrocatalytic materials are first reviewed. Next, their controllable syntheses, characterization techniques, metal-support electronic interactions, and structure-performance relationships are presented. Some representative carbon supports and non-carbonaceous supports, as well as recently reported star supports such as 2D supports, single atom catalysts, and self-supported catalysts are also summarized. In addition, the significant role of support in stabilizing and regulating catalytic active sites is particularly emphasized. Finally, challenges, opportunities, key problems, and further promising solutions for supported catalysts are proposed.

MOF-derived nanoarrays as advanced electrocatalysts for water splitting

Developing efficient, nanostructured electrocatalysts with the desired compositions and structures is of great significance for improving the efficiency of water splitting toward hydrogen production. In this regard, metal-organic framework (MOF) derived nanoarrays have attracted great attention as promising electrocatalysts because of their diverse compositions and adjustable structures. In this review, the recent progress in MOF-derived nanoarrays for electrochemical water splitting is summarized, highlighting the structural design of the MOF-derived nanoarrays and the electrocatalytic performance of the derived composite carbon materials, oxides, hydroxides, sulfides, and phosphides. In particular, the structure-performance relationships of the MOF-derived nanoarrays and the modulation strategies toward enhanced catalytic activity for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are discussed, providing insights into the development of advanced catalysts for the HER and OER. The challenges and prospects in this promising field for future industrial applications are also addressed.

Electronic Tuning of Core-Shell CoNi Nanoalloy/N-Doped Few-Layer Graphene for Efficient Oxygen Electrocatalysis in Rechargeable Zinc-Air Batteries

The discovery of highly efficient, durable, and affordable bifunctional ORR/OER electrocatalysts is of great significance for the commercialization of rechargeable metal-air batteries. Herein, we synthesized uniformly sized CoNi alloy nanoparticles encapsulated with N-doped few-layer graphene (N-FLG) sheets via pyrolysis of a CoNi dual metal-organic framework precursor. The developed CoNi/N-FLG catalyst exhibited excellent oxygen reduction activity (comparable to a commercial 20 wt % Pt/C catalyst) and outstanding oxygen evolution activity (superior to a commercial 20 wt % IrO2/C catalyst), thus enabling efficient bifunctional oxygen electrocatalysis and stability when applied in prototype rechargeable zinc-air batteries. The remarkable electrochemical properties of CoNi/N-FLG originate from its unique core-shell structure and favorable electron penetration effects, thereby optimizing the adsorption/desorption strengths of intermediates formed during the oxygen reduction and oxygen evolution reactions.

Facile synthesis of multiphase cobalt-iron spinel with enriched oxygen vacancies as a bifunctional oxygen electrocatalyst

The multiphase cobalt-iron spinel was firstly synthesized via a facile cold plasma method and applied as a bifunctional electrocatalyst for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Compared with the single-phase obtained by the traditional calcination method, the CoFe₂O₄ and Co₃O₄ phase were obtained by the plasma method. The multivalence states of cobalt and iron facilitated electron transport in electrochemical reactions. The plasma sample had a small particle size (5 nm) due to the low operation temperature. Notably, electron impact produced more oxygen vacancies and a larger surface area on Co_xFe_yO₄, which increased the active sites and electronic conductivity. Electrochemical investigations indicated that the multiphase spinel obtained with a quasi-four-electron transfer process showed an onset potential of 0.76 V versus the RHE for the oxygen reduction reaction. In the oxygen evolution reaction, the potential of current density at 10 mA cm^-2 was 1.53 V versus RHE. As for the overall electrocatalytic activity, the multiphase spinel had a ΔE (the difference between E₁₀(OER) and E_1/2(ORR)) of 0.89 V, exhibiting greater bifunctional activity than the other prepared catalysts.

Experimental and Theoretical Insights into Enhanced Hydrogen Evolution over PtCo Nanoalloys Anchored on a Nitrogen-Doped Carbon Matrix

The identification of synergistic effect of Pt-based alloys on hydrogen evolution reaction (HER) requires a combination of experimental studies and theoretical calculations. Here, we present the construction of uniform PtCo nanoparticles grown on N-doped carbon frameworks via pyrolyzing Pt and Co ions adsorbed polyaniline, whereby the nanostructure of the nanoalloys can be effectively tuned by controlling the calcination temperature. As-prepared PtCo@NC-900 shows the optimal HER performance in 0.5 M H2SO4, resulting in a high mass activity of 4.31 A mgPt-1 and excellent operation durability, which far exceeds that of commercial 20 wt % Pt/C (0.30 A mgPt-1). Density functional theory calculations further reveal that the improved HER activity on PtCo(111) is originated from the strong electronic interaction between Pt and Co with favorable electron transfer, allowing for a more suitable binding strength for hydrogen (i.e., ΔG*H = -0.164 eV) compared with that of pristine Pt(111) (-0.287 eV).

Electrodeposition: An efficient method to fabricate self-supported electrodes for electrochemical energy conversion systems

The development of electrocatalysts for energy conversion systems is essential for alleviating environmental problems and producing useful energy sources as alternatives to fossil fuels. Improving the catalytic performance and stability of electrocatalysts is a major challenge in the development of energy conversion systems. Moreover, understanding their electrode structure is important for enhancing the energy efficiency. Recently, binder-free self-supported electrodes have been investigated because the seamless contact between the electrocatalyst and substrate minimizes the contact resistance as well as facilitates fast charge transfer at the catalyst/substrate interface and high catalyst utilization. Electrodeposition is an effective and facile method for fabricating self-supported electrodes in aqueous solutions under mild conditions. Facile fabrication without a polymer binder and controlability of the compositional and morphological properties of the electrocatalyst make electrodeposition methods suitable for enhancing the performance of energy conversion systems. Herein, we summarize recent research on self-supported electrodes fabricated by electrodeposition for energy conversion reactions, particularly focusing on cathodic reactions of electrolyzer system such as hydrogen evolution, electrochemical CO₂ reduction, and electrochemical N₂ reduction reactions. The deposition conditions, morphological and compositional properties, and catalytic performance of the electrocatalyst are reviewed. Finally, the prospective directions of electrocatalyst development for energy conversion systems are discussed.

Formation of Interfacial Cu-[OX ]-Ce Structures with Oxygen Vacancies for Enhanced Electrocatalytic Nitrogen Reduction

Electrochemical nitrogen reduction powered by renewable electricity is a promising strategy to produce ammonia. However, the lack of efficient yet cheap electrocatalysts remains the biggest challenge. Herein, hybrid Cu₂ O-CeO₂ -C nanorods are prepared on copper mesh through a metal-organic framework template route. The Cu-loaded Ce-MOF is thermally converted to Cu₂ O-CeO₂ heterojunctions with interfacial Cu-[O_X ]-Ce structures embedded in carbon. Theoretical calculations reveal the lower formation energy of oxygen vacancies in Cu-[O_X ]-Ce structures than in the Cu₂ O or CeO₂ phase. The Cu-[O_X ]-Ce structures with oxygen vacancies enable the formation of interfacial electron-rich Cu(I) species which show significantly enhanced performance toward electrocatalytic nitrogen reduction with an NH₃ yield of 6.37 × 10^-3  µg s^-1 cm^-2 and a Faradaic efficiency of 18.21% in 0.10 m KOH at -0.3 V versus reversible hydrogen electrode. This work highlights the importance of modulation of charge distribution of Cu-based electrocatalysts to boost the activity toward nitrogen reduction.

Controllable growth of Fe-doped NiS2 on NiFe-carbon nanofibers for boosting oxygen evolution reaction

The construction of high-efficiency and low-cost electrocatalysts toward oxygen evolution reaction (OER) to improve the overall water decomposition performance is a fascinating route to deal with the clean energy application. Herein, Fe-doped NiS₂ crystals grown on the surface of carbon nanofibers (CNFs) encapsulated with NiFe alloy nanoparticles ((Ni,Fe)S₂/NiFe-CNFs) are fabricated through an electrospinning-calcination-vulcanization process, which has been used as a splendid electrocatalyst for OER. Benefitting from the abundant electrochemical active sites from the incorporation of Fe element in NiS₂ and the synergistic effect between NiFe-CNFs and surface sulfides, the obtained (Ni,Fe)S₂/NiFe-CNFs catalyst exhibits highly electrochemical activities and satisfactory durability toward OER in an alkaline medium with a low overpotential of only 287 mV at a high current density of 30 mA cm^-2, and with a little decline in the current retention after 48 h, suggesting its superior OER performance even compared with some noble metal-based electrocatalysts. Additionally, a two-electrode system conducted by using the (Ni,Fe)S₂/NiFe-CNFs and commercial Pt/C as electrodes, only needs a cell voltage of 1.54 V to afford 10 mA cm^-2 for overall water splitting, which is even much better than the RuO₂||Pt/C electrolyzer. This study offers a promising approach to prepare high-efficiency OER catalysts toward overall water splitting.

Amorphous Boron Carbide on Titanium Dioxide Nanobelt Arrays for High-Efficiency Electrocatalytic NO Reduction to NH3

Electrocatalytic NO reduction is regarded as an attractive strategy to degrade the NO contaminant into useful NH₃ , but the lack of efficient and stable electrocatalysts to facilitate such multiple proton-coupled electron-transfer processes impedes its applications. Here, we report on developing amorphous B_2.6 C supported on a TiO₂ nanoarray on a Ti plate (a-B_2.6 C@TiO₂ /Ti) as an NH₃ -producing nanocatalyst with appreciable activity and durability toward the NO electroreduction. It shows a yield of 3678.6 μg h^-1  cm^-2 and a FE of 87.6 %, superior to TiO₂ /Ti (563.5 μg h^-1  cm^-2 , 42.6 %) and a-B_2.6 C/Ti (2499.2 μg h^-1  cm^-2 , 85.6 %). An a-B_2.6 C@TiO₂ /Ti-based Zn-NO battery achieves a power density of 1.7 mW cm^-2 with an NH₃ yield of 1125 μg h^-1  cm^-2 . An in-depth understanding of catalytic mechanisms is gained by theoretical calculations.

Mo2C@C nanofibers film as durable self-supported electrode for efficient electrocatalytic hydrogen evolution

Self-supported electrocatalytic thin films consist 3D conducting network and well-embedded electrocatalysts, which endows the advantage in mass flow kinetics and durability for large-scale water splitting. Synthesis of such self-supported electrode still remains a big challenge due to the difficulty in the control over the 3D conducting network and the simultaneous growth of catalyst with well attachment on the conducting fibers. Herein, a self-supported Mo₂C@carbon nanofibers (Mo₂C@C NF) film has been successfully fabricated with outstanding electrocatalytic performance under optimized pyrolysis temperature and precursors mass ratio conditions. During the carbonation process, the Mo₂C nanoparticles (∼16 nm) were simultaneously grown and well dispersed on the inter-connected carbon nanofibers, which formed a 3D conducting network. The as-formed 3D carbon network was strong enough to support direct electrocatalytic application without additional ink or supporting substrates. This particular electrode structure facilitated easy access to the active catalytic sites, electron transfer, and hydrogen diffusion, resulting in the high hydrogen evolution reaction activity. A low overpotential of 86 mV was needed to achieve 10 mA cm^-2current density with outstanding kinetics metric (Tafel 43 mV dec^-1) in 1 M KOH. Additionally, the self-supported Mo₂C@C NF film, a binder-free electrode, exhibited extraordinary stability of more than 340 h.

Self-Supported Transition Metal-Based Nanoarrays for Efficient Energy Storage

Rechargeable batteries and supercapacitors are currently considered as promising electrochemical energy storage (EES) systems to address the energy and environment issues. Self-supported transition metal (Ni, Co, Mn, Mo, Cu, V)-based materials are promising electrodes for EES devices, which offer highly efficient charge transfer kinetics. This review summarizes the latest development of transition metal-based materials with self-supported structures for EES systems. Special focus has been taken on the synthetic methods, the selection of substrates, architectures and chemical compositions of different self-supported nanoarrays in energy storage systems. Finally, the challenges and opportunities of these materials for future development in this field are briefly discussed. We believe that the advancement in self-supported electrode materials would pave the way towards next-generation EES.

Ni2P nanosheet array for high-efficiency electrohydrogenation of nitrite to ammonia at ambient conditions

Ammonia (NH₃) plays an important role in agriculture and industry. The industry-scale production mainly depends on the Haber-Bosch process suffering from issues of environment pollution and energy consumption. Electrochemical reduction can degrade nitrite (NO₂^-) pollutants in the environment and convert it into more valuable NH₃. Here, Ni₂P nanosheet array on nickel foam is proposed as a 3D electrocatalyst for high-efficiency electrohydrogenation of NO₂^- to NH₃ under ambient reaction conditions. When tested in 0.1 M phosphate buffer saline with 200 ppm NO₂^-, such Ni₂P/NF is able to obtain a large NH₃ yield rate of 2692.2 ± 92.1 μg h^-1 cm^-2 (3282.9 ± 112.3 μg h^-1 mg_cat.^-1), a high Faradic efficiency of 90.2 ± 3.0%, and selectivity of 87.0 ± 1.7% at -0.3 V versus a reversible hydrogen electrode. After 10 h of electrocatalytic reduction, the conversion rate of NO₂^- achieves near 100%. The catalytic mechanism is further investigated by density functional theory calculations.

Recent advances in MoS2-based materials for electrocatalysis

The increasing energy demand and related environmental issues have drawn great attention of the world, thus necessitating the development of sustainable technologies to preserve the ecosystems for future generations. Electrocatalysts...

MOF-on-MOF Strategy to Construct a Nitrogen-Doped Carbon-Incorporated CoP@Fe-CoP Core-Shelled Heterostructure for High-Performance Overall Water Splitting

The design and preparation of efficient and low-cost catalysts for water electrolysis are crucial and highly desirable to produce eco-friendly and sustainable hydrogen fuel. Herein, we prepared nitrogen-doped carbon-incorporated CoP@Fe-CoP core-shelled nanorod arrays grown on Ni foam (CoP@Fe-CoP/NC/NF) through phosphorization of ZIF-67@Co-Fe Prussian blue analogue (ZIF-67@CoFe-PBA). The hierarchical nanorod arrays combined with the core-shelled structure offer favorable mass/electron transport capacity and maximize the active sites, thus enhancing the electrochemically active surface area. The synergistic effect of the bimetallic components and the nitrogen-doped carbon matrix endow the composite with an optimized electronic structure. Benefiting from the above superiorities of morphological and chemical compositions, this self-supported CoP@Fe-CoP/NC/NF heterostructure can drive alkaline hydrogen evolution reaction and oxygen evolution reaction with overpotentials of 97 and 270 mV to yield 100 mA cm^-2, respectively. The two-electrode alkaline electrolyzer constructed by this heterostructure shows a low cell voltage of 1.58 V to yield 10 mA cm^-2, superior to the precious-metal-based electrocatalyst apparatus (IrO₂∥Pt/C). This study offers a feasible and facile approach to develop efficient electrocatalysts for water electrolysis, which applies to other electrochemical energy conversion and storage applications.

Self-supporting CoP-C nanosheet arrays derived from a metal-organic framework as synergistic catalysts for efficient water splitting

Here, a new strategy that combines accessible active sites and multiphase synergy in a simple process is developed for constructing bifunctional electrocatalysts toward overall water splitting. By using metal-organic framework (MOF) nanosheets hydrothermally grown on pre-oxidized nickel foam (denoted by Co₂(OH)₂(BDC)/NiO/NF) as a precursor, two novel heterogeneous nanosheet arrays including a cobalt phosphide nanoparticle embedded carbon nanotube nanosheet array supported by phosphorized nickel foam (denoted by CoP-CNT/Ni₂P/NF) and a cobalt phosphide nanorod decorated carbon nanosheet array supported by oxidized nickel foam (denoted by CoP-C/NiO/NF) are prepared. Both were confirmed to be highly efficient for hydrogen and oxygen evolution reactions. In particular, CoP-C/NiO/NF exhibits higher catalytic activity toward the hydrogen evolution reaction (η₁₀₀ = -131 mV), promoted by the synergy of oxidized nickel foam. CoP-CNT/Ni₂P/NF performs better in the oxygen evolution reaction (η₅₀ = 301 mV), benefiting mainly from its improved electrochemically active surface area. The two catalysts match well in overall water splitting with satisfactory activity (η₁₀ = 1.57 V) and stability when directly applied in a two-electrode cell. This method will bring new inspiration to maximize the electrocatalytic efficiency of MOF-derived catalysts for energy conversion applications in the future.

Conductive One-Dimensional Coordination Polymers with Tunable Selectivity for the Oxygen Reduction Reaction

Conductive materials involving nonprecious metal coordination complexes as electrocatalysts for the oxygen reduction reaction (ORR) have received increasing attention in recent years. Herein, we reported efficient ORR electrocatalysts containing M-S2N2 sites with tunable selectivity based on simple one-dimensional (1D) coordination polymers (CPs). The 1D CPs were synthesized from M(OAc)2 and 2,5-diamino-1,4-benzenedithiol (DABDT) by a solvent thermal method. Due to their good electrical conductivities (10-6-10-2 S cm-1), the 1D CPs could be used as ORR catalysts in low catalytic amounts without the addition of carbon materials. Cobalt-based CPs showed a well-organized structure of nanosheets with Co-S2N2 sites exposed and exhibited remarkable electrocatalytic ORR activity (Eonset = 0.93 V vs reversible hydrogen electrode (RHE), E1/2 = 0.82 V, n = 3.85, JL = 5.22 mA cm-2, Tafel slope of 63 mV dec-1) in alkaline media. However, nickel-based CPs favored a 2e- ORR process with ∼87% H2O2 selectivity and an Eonset of 0.78 V. This work provides new opportunities for the construction of ORR catalysts based on conductive nonprecious metal CPs.

A Ta-TaS2 monolith catalyst with robust and metallic interface for superior hydrogen evolution

The use of highly-active and robust catalysts is crucial for producing green hydrogen by water electrolysis as we strive to achieve global carbon neutrality. Noble metals like platinum are currently used catalysts in industry for the hydrogen evolution, but suffer from scarcity, high price and unsatisfied performance and stability at large current density, restrict their large-scale implementations. Here we report the synthesis of a type of monolith catalyst consisting of a metal disulfide (e.g., tantalum sulfides) vertically bonded to a conductive substrate of the same metal tantalum by strong covalent bonds. These features give the monolith catalyst a mechanically-robust and electrically near-zero-resistance interface, leading to an excellent hydrogen evolution performance including rapid charge transfer and excellent durability, together with a low overpotential of 398 mV to achieve a current density of 2,000 mA cm^-2 as required by industry. The monolith catalyst has a negligible performance decay after 200 h operation at large current densities. In light of its robust and metallic interface and the various choices of metals giving the same structure, such monolith materials would have broad uses besides catalysis.

Tuning Metal Elements in Open Frameworks for Efficient Oxygen Evolution and Oxygen Reduction Reaction Catalysts

Electrochemical methods are promising technical routes for future clean energy storage and conversion. Most of the electrochemical methods involve oxygen reactions. Unfavorable kinetics and sluggish reactions are the main challenges for these processes. We report here a facile synthesis of highly efficient oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) catalysts. The catalysts are synthesized through the fine-tuning of metal ions (M, specifically Co, Ni, Zn, and Cu) in Prussian blue analogues (PBAs) and thus termed as M-PBAs. The CoNi-PBA-2 catalyst shows the highest activity toward OER with an onset potential at 280 mV and a Tafel slope of 63 mV dec^-1. Zn-PBA catalysts demonstrate high selectivity in two-electron-transfer ORR. The H₂O₂ yield is as high as 88% at 0 V vs RHE. Density functional theory (DFT) calculations also confirm the high selectivity of Zn-PBA toward H₂O₂ in ORR.

Surface Defect Engineering on Perovskite Oxides as Efficient Bifunctional Electrocatalysts for Water Splitting

The design of high-performance and cost-effective electrocatalysts for water splitting is of prime importance for efficient and sustainable hydrogen production. In this work, a surface defect engineering method is developed for optimizing the electrocatalytic activity of perovskite oxides for water electrolysis. A typical ferrite-based perovskite oxide material La_0.6Sr_0.4Co_0.2Fe_0.8O_3-δ (LSCF) is used and regulated by selective acid etching. The optimal parameters for the surface treatment are identified. An efficient bifunctional perovskite oxide, denoted LSCF-30, is prepared by selectively corroding the A-site Sr element in the surface region, which is found to not only increase the exposure and decrease the coordination of B-site metals but also effectively modulate the electronic structure of these metals. The crystal lattice of the perovskite bulk is kept constant during surface engineering, which ensures the structural stability of the perovskite catalyst. The findings demonstrate an effective strategy of surface defect engineering in enhancing the performance of perovskite oxide electrocatalysts for water splitting.