Phase and Morphology Transformation of MnO2 Induced by Ionic Liquids toward Efficient Water Oxidation

Tailoring the Compositions and Nanostructures of Trimetallic Prussian Blue Analog-Derived Carbides for Water Oxidation

The electrochemical splitting of water for hydrogen production faces a major challenge due to its anodic oxygen evolution reaction (OER), necessitating research on the rational design and facile synthesis of OER catalysts to enhance catalytic activity and stability. This study proposes a ligand-induced MOF-on-MOF approach to fabricate various trimetallic MnFeCo-based Prussian blue analog (PBA) nanostructures. The addition of [Fe(CN)6]3- transforms them from cuboids with protruding corners (MnFeCoPBA-I) to core-shell configurations (MnFeCoPBA-II), and finally to hollow structures (MnFeCoPBA-III). After pyrolysis at 800 °C, they are converted into corresponding PBA-derived carbon nanomaterials, featuring uniformly dispersed Mn2Co2C nanoparticles. A comparative analysis demonstrates that the Fe addition enhances catalytic activity, while Mn-doped materials exhibit excellent stability. Specifically, the optimized MnFeCoNC-I-800 demonstrates outstanding OER performance in 1.0 m KOH solution, with an overpotential of 318 mV at 10 mA cm-2, maintaining stability for up to 150 h. Theoretical calculations elucidate synergistic interactions between Fe dopants and the Mn2Co2C matrix, reducing barriers for oxygen intermediates and improving intrinsic OER activity. These findings offer valuable insights into the structure-morphology relationships of MOF precursors, advancing the development of highly active and stable MOF-derived OER catalysts for practical applications.

Manganese-based nanomaterials promote synergistic photo-immunotherapy: green synthesis, underlying mechanisms, and multiple applications

Single phototherapy and immunotherapy have individually made great achievements in tumor treatment. However, monotherapy has difficulty in balancing accuracy and efficiency. Combining phototherapy with immunotherapy can realize the growth inhibition of distal metastatic tumors and enable the remote monitoring of tumor treatment. The development of nanomaterials with photo-responsiveness and anti-tumor immunity activation ability is crucial for achieving photo-immunotherapy. As immune adjuvants, photosensitizers and photothermal agents, manganese-based nanoparticles (Mn-based NPs) have become a research hotspot owing to their multiple ways of anti-tumor immunity regulation, photothermal conversion and multimodal imaging. However, systematic studies on the synergistic photo-immunotherapy applications of Mn-based NPs are still limited; especially, the green synthesis and mechanism of Mn-based NPs applied in immunotherapy are rarely comprehensively discussed. In this review, the synthesis strategies and function of Mn-based NPs in immunotherapy are first introduced. Next, the different mechanisms and leading applications of Mn-based NPs in immunotherapy are reviewed. In addition, the advantages of Mn-based NPs in synergistic photo-immunotherapy are highlighted. Finally, the challenges and research focus of Mn-based NPs in combination therapy are discussed, which might provide guidance for future personalized cancer therapy.

Electric-field-assisted proton coupling enhanced oxygen evolution reaction

The discovery of Mn-Ca complex in photosystem II stimulates research of manganese-based catalysts for oxygen evolution reaction (OER). However, conventional chemical strategies face challenges in regulating the four electron-proton processes of OER. Herein, we investigate alpha-manganese dioxide (α-MnO2) with typical MnIV-O-MnIII-HxO motifs as a model for adjusting proton coupling. We reveal that pre-equilibrium proton-coupled redox transition provides an adjustable energy profile for OER, paving the way for in-situ enhancing proton coupling through a new "reagent"- external electric field. Based on the α-MnO2 single-nanowire device, gate voltage induces a 4-fold increase in OER current density at 1.7 V versus reversible hydrogen electrode. Moreover, the proof-of-principle external electric field-assisted flow cell for water splitting demonstrates a 34% increase in current density and a 44.7 mW/cm² increase in net output power. These findings indicate an in-depth understanding of the role of proton-incorporated redox transition and develop practical approach for high-efficiency electrocatalysis.

Crystal-Phase Engineering in Heterogeneous Catalysis

The performance of a chemical reaction is critically dependent on the electronic and/or geometric structures of a material in heterogeneous catalysis. Over the past century, the Sabatier principle has already provided a conceptual framework for optimal catalyst design by adjusting the electronic structure of the catalytic material via a change in composition. Beyond composition, it is essential to recognize that the geometric atomic structures of a catalyst, encompassing terraces, edges, steps, kinks, and corners, have a substantial impact on the activity and selectivity of a chemical reaction. Crystal-phase engineering has the capacity to bring about substantial alterations in the electronic and geometric configurations of a catalyst, enabling control over coordination numbers, morphological features, and the arrangement of surface atoms. Modulating the crystallographic phase is therefore an important strategy for improving the stability, activity, and selectivity of catalytic materials. Nonetheless, a complete understanding of how the performance depends on the crystal phase of a catalyst remains elusive, primarily due to the absence of a molecular-level view of active sites across various crystal phases. In this review, we primarily focus on assessing the dependence of catalytic performance on crystal phases to elucidate the challenges and complexities inherent in heterogeneous catalysis, ultimately aiming for improved catalyst design.

Structural Transformation by Crystal Engineering Endows Aqueous Zinc-Ion Batteries with Ultra-long Cyclability

Manganese oxide is a promising cathode material for aqueous zinc batteries. However, its weak structural stability, low electrical conductivity, and sluggish reaction kinetics lead to rapid capacity fading. Herein, a crystal engineering strategy is proposed to construct a novel MnO₂ cathode material. Both experimental results and theoretical calculations demonstrate that Al-doping plays a crucial role in phase transition and doping-superlattice structure construction, which stabilizes the structure of MnO₂ cathode materials, improves conductivity, and accelerates ion diffusion dynamics. As a result, 1.98% Al-doping MnO₂ (AlMO) cathode shows an incredible 15 000 cycle stability with a low capacity decay rate of 0.0014% per cycle at 4 A g^-1 . Additionally, it provides superior specific capacity of 311.2 mAh g^-1 at 0.1 A g^-1 and excellent rate performance (145.2 mAh g^-1 at 5.0 A g^-1 ). To illustrate the potential of 1.98%AlMO to be applied in actual practice, flexible energy storage devices are fabricated and measured. These discoveries provide a new insight for structural transformation via crystal engineering, as well as a new avenue for the rational design of electrode material in other battery systems.

Ni-Doped MnO2 Nanosheet Arrays for Efficient Urea Oxidation

Urea oxidation reaction (UOR), with a low thermodynamic potential, offers great promise for replacing anodic oxygen evolution reaction of electrolysis systems such as water splitting, carbon dioxide reduction, etc., thus reducing the overall energy consumption. To promote the sluggish kinetics of UOR, highly efficient electrocatalysts are required, and Ni-based materials have been widely investigated. However, most of these reported Ni-based catalysts suffer from large overpotentials, as they generally undergo self-oxidation to form NiOOH species at high potentials, which act as catalytically active sites for UOR. Herein, Ni-doped MnO₂ (Ni-MnO₂) nanosheet arrays were successfully prepared on nickel foam. The as-fabricated Ni-MnO₂ shows distinct UOR behavior with most of the previously reported Ni-based catalysts, as urea oxidation on Ni-MnO₂ proceeds before the formation of NiOOH. Notably, a low potential of 1.388 V vs reversible hydrogen electrode was required to achieve a high current density of 100 mA cm^-2 on Ni-MnO₂. It is suggested that both Ni doping and nanosheet array configuration are responsible for the high UOR activities on Ni-MnO₂. The introduction of Ni modifies the electronic structure of Mn atoms, and more Mn³⁺ species are generated in Ni-MnO₂, contributing to its outstanding UOR performance.

Effect of Proton Transfer on Electrocatalytic Water Oxidation by Manganese Phosphates

The effect of proton transfer on water oxidation has hardly been measurably established in heterogeneous electrocatalysts. Herein, two isomorphous manganese phosphates (NH₄ MnPO₄  ⋅ H₂ O and KMnPO₄  ⋅ H₂ O) were designed to form an ideal platform to study the effect of proton transfer on water oxidation. The hydrogen-bonding network in NH₄ MnPO₄  ⋅ H₂ O has been proven to be solely responsible for its better activity. The differences of the proton transfer kinetics in the two materials indicate a fast proton hopping transfer process with a low activation energy in NH₄ MnPO₄  ⋅ H₂ O. In addition, the hydrogen-bonding network can effectively promote the proton transfer between adjacent Mn sites and further stabilize the Mn^III -OH intermediates. The faster proton transfer results in a higher proportion of zeroth-order in [H⁺ ] for OER. Thus, proton transfer-affected electrocatalytic water oxidation has been measurably observed to bring detailed insights into the mechanism of water oxidation.

Crystallization Pathways and Evolution of Morphologies and Structural Defects of α-MnO2 under Air Annealing

Manganese dioxide nanomaterials have wide applications in many areas from catalysis and Li-ion batteries to gas sensing. Understanding the crystallization pathways, morphologies, and formation of defects in their structure is particularly important but still a challenging issue. Herein, we employed an arsenal of X-ray diffraction (XRD), scanning electron microscopy (SEM), neutron diffraction, positron annihilation spectroscopies, and ab initio calculations to investigate the evolution of the morphology and structure of α-MnO₂ nanomaterials prepared via reduction of KMnO₄ solution with C₂H₅OH prior to being annealed in air at 200-600 °C. We explored a novel evolution that α-MnO₂ nucleation can be formed even at room temperature and gradually developed to α-MnO₂ nanorods at above 500 °C. We also found the existence of H⁺ or K⁺ ions in the [1 × 1] tunnels of α-MnO₂ and observed the simultaneous presence of Mn and O vacancies in α-MnO₂ crystals at low temperatures. Increasing the temperature removed these O vacancies, leaving only the Mn vacancies in the samples.

Phase Engineering of Metastable Transition Metal Dichalcogenides via Ionic Liquid Assisted Synthesis

Metallic group VIB transition metal dichalcogenides (1T-TMDs) have attracted great interest because of their outstanding performance in electrocatalysis, supercapacitors, batteries, and so on, whereas the strict fabrication conditions and thermodynamical metastability of 1T-TMDs greatly restrict their extensive applications. Therefore, it is significant to obtain stable and high-concentration 1T-TMDs in a simple and large-scale strategy. Herein, we report a facile and large-scale synthesis of high-concentration 1T-TMDs via an ionic liquid (IL) assisted hydrothermal strategy, including 1T-MoS₂ (the obtained MoS₂ sample was denoted as MoS₂-IL), 1T-WS₂, 1T-MoSe₂, and 1T-WSe₂. More importantly, we found that IL can adsorb on the surface of 1T-MoS₂, where the steric hindrance, π-π stacking, and hydrogen bonds of ionic liquid collectively induce the formation of the 1T-MoS₂. In addition, DFT calculation reveals that electrons are transferred from [BMIM]SCN (1-butyl-3-methylimidazolium thiocyanate) to 1T-MoS₂ layers by hydrogen bonds, which enhances the stability of 1T-MoS₂, so the MoS₂-IL performs with high stability for 180 days at room temperature without obvious change. Furthermore, the MoS₂-IL exhibits excellent HER performance with an overpotential of 196 mV at 10 mA cm^-2 in acid conditions.

Deciphering the Space Charge Effect of the p-n Junction between Copper Sulfides and Molybdenum Selenides for Efficient Water Electrolysis in a Wide pH Range

Space charge transfer is crucial for an efficient electrocatalytic process, especially for narrow-band-gap metal sulfides/selenides. Herein, we designed and synthesized a core-shell structure which is an ultrathin MoSe₂ nanosheet coated CuS hollow nanoboxes (CuS@MoSe₂) to form an open p-n junction structure. The space charge effect in the p-n junction region will greatly improve electron mass transfer and conduction, and also have abundant active interfaces. It was used as a bifunctional electrocatalyst for water oxidation at a wide pH range. It exhibits a low overpotential of 49 mV for the HER and 236 mV for the OER at a current density of 10 mA·cm^-2 in acidic pH, 72 mV for the HER and 219 mV at 10 mA·cm^-2 for the OER in alkaline pH, and 62 mV for the HER and 230 mV at 10 mA·cm^-2 for the OER under neutral conditions. The experimental results and density functional theory calculations testify that the p-n junction in CuS@MoSe₂ designed and synthesized has a strong space charge region with a synergistic effect. The built-in field can boost the electron transport during the electrocatalytic process and can stabilize the charged active center of the p-n junction. This will be beneficial to improve the electrocatalytic performance. This work provides the understanding of semiconductor heterojunction applications and regulating the electronic structure of active sites.

Advanced Zinc-Air Batteries with Free-Standing Hierarchical Nanostructures of the Air Cathode for Portable Applications

It is today advanced that the development of a free-standing (binderless) air cathode via direct growth of nonprecious metal electrocatalysts onto the surface of the conductive collector would be a cutting-edge strategy to reduce the interfacial resistance, improve the mechanical stability, and reduce the final weight and the cost of manufacturing. Here, for Zn-air batteries (ZABs), we propose an innovative binderless noble-metal-free hierarchical nanostructured bifunctional air cathode in which high-density MnO_x nanorods (NRs) are directly grown on carbon nanotubes (CNTs) themselves synthesized on a microfibrous carbon paper (CP) substrate. All carbon/MnO_x air cathodes achieved specific capacities very close to the theoretical value of 820 mAh g_Zn^-1. A very stable voltage gap between the charge and discharge processes along hundred cycles was obtained, demonstrating the stability and good bifunctional electrocatalytic activities of these cathodes toward the oxygen reduction reaction/oxygen evolution reaction in a real ZAB device. As a proof-of-concept for handheld electronic applications, a ZAB assembled with CP/MnO_x NRs as the air electrode and a Zn plate anode operated a timer for 14 days successfully, whereas two ZAB-based CNTs/MnO_x cathodes connected in series powered a 2 V light-emitting diode (LED) bulb and a 3 V multimeter. The proposed strategy and results may pave the way for the rational design of hierarchical free-standing bifunctional electrocatalysts for ZABs, other metal-air batteries, and fuel cells.

Recent Progress on Transition Metal Based Layered Double Hydroxides Tailored for Oxygen Electrode Reactions

The oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), namely, so-called oxygen electrode reactions, are two fundamental half-cell reactions in the energy storage and conversion devices, e.g., zinc–air batteries and fuel cells. However, the oxygen electrode reactions suffer from sluggish kinetics, large overpotential and complicated reaction paths, and thus require efficient and stable electrocatalysts. Transition-metal-based layered double hydroxides (LDHs) and their derivatives have displayed excellent catalytic performance, suggesting a major contribution to accelerate electrochemical reactions. The rational regulation of electronic structure, defects, and coordination environment of active sites via various functionalized strategies, including tuning the chemical composition, structural architecture, and topotactic transformation process of LDHs precursors, has a great influence on the resulting electrocatalytic behavior. In addition, an in-depth understanding of the structural performance and chemical-composition-performance relationships of LDHs-based electrocatalysts can promote further rational design and optimization of high-performance electrocatalysts. Finally, prospects for the design of efficient and stable LDHs-based materials, for mass-production and large-scale application in practice, are discussed.

A mild reduction of Co-doped MnO2 to create abundant oxygen vacancies and active sites for enhanced oxygen evolution reaction

Efficient and non-precious-metal-based catalysts (e.g., manganese-based oxides) for the oxygen evolution reaction (OER) remain a substantial challenge. Creation of oxygen vacancies of manganese-based oxides with the aim to enhance their intrinsic activities is rarely reported, and there is a critical requirement for a mild and facile synthesis strategy to create abundant oxygen vacancies on manganese-based oxides. Herein, Co-doped MnO₂ nanowires were reduced by NaBH₄ solution at room temperature; then, MnCo₂O_4.5 nanosheets with abundant oxygen vacancies and active sites were formed on the surface of Co-doped MnO₂ nanowires. Benefiting from the reduction strategy, the fabricated hierarchical Co-doped-MnO₂@MnCo₂O_4.5 nanowire/nanosheet nanocomposites exhibit higher catalytic activity (an overpotential of 250 mV at a current density of 10 mA cm^-2 in 1.0 M KOH solution) than pristine Co-doped MnO₂ nanowires. The calculated TOF of Co-doped-MnO₂@MnCo₂O_4.5 is 0.034 s^-1 at the overpotential of 300 mV, which is 136-fold higher than that of Co-doped-MnO₂. The excellent OER performance was attributed to the synergistic advantages of abundant oxygen vacancies and active sites over the hierarchical nanowire-nanosheet architectures.

The effects of Fe-doping on MnO2: phase transitions, defect structures and its influence on electrical properties

The composition of Mn_1−xFe_xO₂ (x = 0–0.15) was synthesized by a hydrothermal method at 140 °C for 5 hours of reaction time. Investigations were carried out including XRD, FTIR, Raman spectroscopy, FESEM, and TEM for crystallographic phase analysis. Furthermore, XPS and XAS were used to analyze the oxidation states of Mn and dopant Fe in the octahedron sites. For electrical characterizations, an impedance analyzer was used to explore the conductivity and dielectric properties. It was discovered that the undoped MnO₂ possessed an α-MnO₂ structure performing (2 × 2) tunnel permitting K⁺ insertion and had a nanorod morphology. The Fe ion that was doped into MnO₂ caused a phase transformation from α-MnO₂ to Ramsdellite R-MnO₂ after x = 0.15 was reached and the tunnel dimension changed to (2 × 1). Furthermore, this caused increased micro-strain and oxygen vacancies. An oxidation state analysis of Mn and substituted Fe in the octahedron sites found mixed 3+ and 4+ states. Electrical characterization revealed that the conductivity of Fe-doped MnO₂ is potentially electron influenced by the oxidation state of the cations in the octahedron sites, the micro-strain, the dislocation density, and the movement of K⁺ ions in the tunnel.

Phase transformation from initially α-MnO₂ to R-MnO₂ due to Fe-doping cause modification of interatomic distances affects to the electrical properties.

A controlled synthesis of γ-MnOOH nanorods via a facile hydrothermal method for high-performance Li-ion batteries

A hydrothermal reduction route was used for the controlled production of MnOOH nanostructures. The formed γ-MnOOH nanorods can be used as one of the high performance anodes for the preparation of lithium ion batteries.

Selectivity-tunable oxidation of tetrahydro-β-carboline over an OMS-2 composite catalyst: preparation and catalytic performance

Controlling the reaction selectivity of organic transformations without losing high conversion is always a challenge in catalytic processes. In this work, a H3PO4·12WO3/OMS-2 nanocomposite catalyst ([PW]-OMS-2) was prepared through the oxidation of a Mn(ii) salt with sodium phosphotungstate by KMnO4. Comprehensive characterization indicates that different Mn2+ precursors significantly affected the crystalline phase and morphology of the as-synthesized catalysts and only MnSO4·H2O as the precursor could lead to a cryptomelane phase. Moreover, [PW]-OMS-2 demonstrated excellent catalytic activity toward aerobic oxidative dehydrogenation of tetrahydro-β-carbolines due to mixed crystalline phases, enhanced surface areas, rich surface oxygen vacancies and labile lattice oxygen species. In particular, β-carbolines and 3,4-dihydro-β-carbolines could be obtained from tetrahydro-β-carbolines with very high selectivity (up to 99%) over [PW]-OMS-2 via tuning the reaction solvent and temperature. Under the present catalytic system, scalable synthesis of a β-carboline was achieved and the composite catalyst showed good stability and recyclability. This work not only clarified the structure-activity relationship of the catalyst, but also provided a practical pathway to achieve flexible, controllable synthesis of functional N-heterocycles.

Co/Co9S8@carbon nanotubes on a carbon sheet: facile controlled synthesis, and application to electrocatalysis in oxygen reduction/oxygen evolution reactions, and to a rechargeable Zn-air battery

A facile strategy to fabricate Co/Co₉S₈ nanoparticles-encapsulated in carbon nanotubes, on an N-doped porous graphene sheet (Co/Co₉S₈@CNTs) via pyrolysis of a mixture of Co(NO₃)₂, melamine and l-cysteine is reported.

Effect of Absorbed Sulfate Poisoning on the Performance of Catalytic Oxidation of VOCs over MnO2

Manganese oxides have displayed vast potential for future development in the field of catalytic abatement of volatile organic compounds (VOCs) because of their low cost, high stability, and enhanced catalytic activity. Manganese sulfate and manganese chloride are widely used as reaction sources to prepare manganese oxides. As reported, absorbed chloride usually affects the performance of catalysts. However, the effect of absorbed sulfate on catalysts has been overlooked at present. Herein, the poisoning effect of absorbed sulfate on MnO₂ catalyst in the catalytic oxidation of VOCs has been uncovered. Manganese sulfate-derived MnO₂ catalyst exhibits a significantly enhanced performance after repeated washing by water, which indicates that absorbed sulfate has an adverse effect on MnO₂ catalyst for removal of VOCs. The blocking of the surface oxygen species and active sites is considered as the reason for sulfate poisoning. Hence, elimination of absorbed sulfate by thorough washing or other effective method is essential for preparing high-performance manganese sulfate-derived manganese oxide catalysts.

Surface activation towards manganese dioxide nanosheet arrays via plasma engineering as cathode and anode for efficient water splitting

Developing high-efficiency, low-cost electrocatalysts for water splitting is important but challenging. Two-dimensional nanosheet manganese dioxide (MnO₂) arrays are promising candidates for the design and development of advanced catalysts because of their large surface area. Here, a feasible solution to improve the catalytic activity of MnO₂ materials via decorating the active sites on the surface is proposed. With the help of plasma engineering, we successfully enabled surface activity of the MnO₂ nanosheets by decorating P or Fe species together with rich vacancies on the surface. The decorated P (P-MnO₂) or Fe (Fe-MnO₂) species were highly beneficial for the absorption of protons and OH^- respectively, and rich oxygen vacancies induced the formation of stable Mn³⁺, which contributed to electron and charge transfer. Thus, increased electrochemically active specific areas, accelerated charge transfer, and a proper surface electronic structure could be achieved. On the basis of this activation strategy, the fabricated P-MnO₂ and Fe-MnO₂ showed excellent catalytic performance for the hydrogen evolution and oxygen evolution reactions. To our knowledge, the performance of P-MnO₂ and Fe-MnO₂ outperformed most MnO₂-based electrocatalysts in the field of electrocatalytic water splitting. Surface activation of two-dimensional MnO₂ materials by decorating active species via plasma treatment can provide a feasible route for modulating the performance of earth-abundant electrocatalysts for practical applications.

Alkali-Etched Ni(II)-Based Metal-Organic Framework Nanosheet Arrays for Electrocatalytic Overall Water Splitting

The exploration of efficient electrocatalysts is the central issue for boosting the overall efficiency of water splitting. Herein, pertinently creating active sites and improving conductivity for metal-organic frameworks (MOFs) is proposed to tailor electrocatalytic properties for overall water splitting. An Ni(II)-MOF nanosheet array is presented as an ideal material model and a facile alkali-etched strategy is developed to break its NiO bonds accompanied with the introduction of extra-framework K cations, which contribute to creating highly active open metal sites and largely improving the electrical conductivity. As a result, the assembled defect-Ni-MOF||defect-Ni-MOF electrolyte cell delivers a lower and stable voltage of 1.50 V at 10 mA cm^-2 in alkaline medium for overall water splitting, comparable to the combination of iridium and platinum as benchmark catalysts.

Three-Dimensional Transition Metal Phosphide Heteronanorods for Efficient Overall Water Splitting

The development of low-cost electrocatalysts with excellent activity and durability for both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) poses a huge challenge in water splitting. In this study, a simple and scalable strategy is proposed to fabricate 3 D heteronanorods on nickel foam, in which nickel molybdenum phosphide nanorods are covered with cobalt iron phosphide (P-NM-CF HNRs). As a result of the rational design, the P-NM-CF HNRs have a large surface area, tightly connected interfaces, optimized electronic structures, and synergy between the metal atoms. Accordingly, the P-NM-CF HNRs exhibit a remarkably high catalytic activity for the OER under alkaline conditions and wide-pH HER. For overall water splitting, the catalyst only requires a voltage of 1.53 V to reach a current density of 10 mA cm^-2 in 1 m KOH with prominent stability, and the activity is not degraded after stability testing for 36 h. This new strategy can inspire the design of durable nonprecious-metal catalysts for large-scale industrial water splitting.

Self-Phosphorization of MOF-Armored Microbes for Advanced Energy Storage

Utilization of microbes as the carbon source and structural template to fabricate porous carbon has incentivized great interests owing to their diverse micromorphology and intricate intracellular structure, apart from the obvious benefit of "turning waste into wealth." Challenges remain to preserve the biological structure through the harsh and laborious post-synthetic treatments, and tailor the functionality as desired. Herein, Escherichia coli is directly coated with metal-organic frameworks (MOFs) through in situ assembly to fabricate N, P co-doped porous carbon capsules expressing self-phosphorized metal phosphides. While the MOF coating serves as an armoring layer for facilitating the morphology inheritance from the bio-templates and provides metal sources for generating extra porosity and electrochemically active sites, the P-rich phospholipids and N-rich proteins from the plasma membrane enable carbon matrix doping and further yield metal phosphides. These unique structural and compositional features endow the carbon capsules with great capabilities in suppressing polysulfide shuttling and catalyzing reversible oxygen conversion, ultimately leading to the superb performance of lithium-sulfur batteries and zinc-air batteries. Combining the bio-templating strategy with hierarchical MOF assembly, this work opens a new avenue for the fabrication of highly porous and functional carbon for advanced energy applications.

Nanometal Oxides with Special Surface Physicochemical Properties to Promote Electrochemical Detection of Heavy Metal Ions

Heavy metal ions (HMIs) are one of the major environmental pollution problems currently faced. To monitor and control HMIs, rapid and reliable detection is required. Electrochemical analysis is one of the promising methods for on-site detection and monitoring due to high sensitivity, short response time, etc. Recently, nanometal oxides with special surface physicochemical properties have been widely used as electrode modifiers to enhance sensitivity and selectivity for HMIs detection. In this work, recent advances in the electrochemical detection of HMIs using nanometal oxides, which are attributed to specific crystal facets and phases, surficial defects and vacancies, and oxidation state cycle, are comprehensively summarized and discussed in aspects of synthesis, characterization, electroanalysis application, and mechanism. Moreover, the challenges and opportunities for the development and application of nanometal oxides with functional surface physicochemical properties in electrochemical determination of HMIs are presented.

Nitrogen-doped carbon fibers embedding CoOx nanoframes towards wearable energy storage

As continuous consumption of the world's lithium reserves is causing concern, alternative energy storage solutions based on earth-abundant elements, such as sodium-ion batteries and zinc-air batteries, have been attracting increasing attention. Herein, nanoframes of CoOx are encapsulated into carbonized microporous fibers by electrospinning zeolitic imidazolate frameworks to impart both a sodium-hosting capability and catalytic activities for reversible oxygen conversion. The ultrahigh rate performance of sodium-ion batteries up to 20 A g-1 and ultrastable cycling over 6000 cycles are attributed to a dual-buffering effect from the framework structure of CoOx and the confinement of carbon fibers that effectively accommodates cyclic volume fluctuation. Both in situ Raman and ex situ microscopic analyses unveil the reversible conversion of CoOx during the sodiation/desodiation process. The excellent ORR activity, superior to that of commercial Pt/C, is mainly ascribed to the abundant Co-N-C species and the full exposure of active sites on the microporous framework structure. Flexible and rechargeable sodium-ion full batteries and zinc-air batteries are further demonstrated with great energy efficiency and cycling stability, as well as mechanical deformability.

Thermal and light irradiation effects on the electrocatalytic performance of hemoglobin modified Co3O4-g-C3N4 nanomaterials for the oxygen evolution reaction

The oxygen evolution reaction (OER) plays a key role in the water splitting process and a high energy conversion efficiency is essential for the definitive advance of hydrogen-based technologies. Unfortunately, the green and sustainable development of electrocatalysts for water oxidation is nowadays a real challenge. Herein, a successful mechanochemical method is proposed for the synthesis of a novel hemoglobin (Hb) modified Co₃O₄/g-C₃N₄ composite nanomaterial. The controlled incorporation of cobalt entities as well as Hb functionalization, without affecting the g-C₃N₄ nanoarchitecture, was evaluated using different physicochemical techniques, such as X-ray diffraction, N₂-physisorption, scanning electron microscopy, UV-visible spectroscopy and X-ray photoelectron spectroscopy. The beneficial effect of the resulting ternary bioconjugate together with the influence of the temperature and light irradiation was investigated by electrochemical analysis. At 60 °C and under light exposition, this electrocatalyst requires an overpotential of 370 mV to deliver a current density of 10 mA·cm^-2, showing a Tafel slope of 66 mV·dec^-1 and outstanding long-term stability for 600 OER cycles. This work paves a way for the controlled fabrication of multidimensional and multifunctional bio-electrocatalysts.

Rational phase transformation and morphology design to optimize oxygen evolution property of cobalt tungstate

In this work, a facile and feasible soft template method with the aid of buffer solution is successfully applied to synthesize high-order mesoporous cobalt tungstate for the first time. Attributing to the regulation of reaction solution's pH value and the existence of template, the phenomenon of phase transformation occurs, and high-order mesoporous structure is formed. Because of the variation of phase and morphology, only 448 mV can deliver a current density of 10 mA cm^-2 with a small Tafel slope (61 mV dec^-1) for mesoporous cobalt tungsten oxide hydroxide, while the cobalt tungstate nanoparticles cannot satisfy the basic demand of electrocatalysts. Herein, rational phase transformation and morphology design can significantly affect the property of oxygen evolution, which can provide vast opportunities to turn into candidates for the novel oxygen evolution catalyst.

Covalent organic frameworks bearing pillar[6]arene-reduced Au nanoparticles for the catalytic reduction of nitroaromatics

While tremendous advancements in 2D materials anchoring Au nanoparticles have been made, it is an urgent challenge to explore a green and facile approach for obtaining small-size Au nanoparticles. The rise of 2D covalent organic framework (COF) presents more-promising candidates for constructing excellent sites for loading metal nanoparticles. In this study, a novel 2D heterogeneous hybrid nanomaterial (P6-Au-COF) based on COF and pillar[6]arene (P6) reduced Au nanoparticles (P6-Au) is prepared by a simple and green procedure. The Au nanoparticles with an average small diameter of 2-3 nm are homogeneously dispersed on the surface of the COF. The P6-Au-COF hybrid material shows highly catalytic performance for the reduction of nitrophenol isomers when compared with commercial Pd/C catalyst and other reported materials. The P6-Au-COF hybrid material exhibits durable recyclablility and stability during the catalytic reaction. Considering the outstanding merits of the heterogeneous 2D catalyst of P6-Au-COF as well as the simple and green preparation, this research might not only present enormous opportunities for stabilized, high-performance and sustainable catalysts, but be applied in other frontier study of sustainable functionalized nanocomposites and advanced materials.

Two-dimensional bimetallic CoFe selenite via metal-ion assisted self-assembly for enhanced oxygen evolution reaction

A 2D CoFe selenite crystals was used as an efficient OER catalyst, which was obtained in a high yield via a simple metal-ion self-assembly strategy under hydrothermal condition.

High-pressure synthesis of ε-FeOOH from β-FeOOH and its application to the water oxidation catalyst

Research on materials under extreme conditions such as high pressures provides new insights into the evolution and dynamics of the earth and space sciences, but recently, this research has focused on applications as functional materials. In this contribution, we examined high-pressure/high-temperature phases of β-FeO_1−x(OH)_1+xCl_x with x = 0.12 (β-FeOOH) and their catalytic activities of water oxidation, i.e., oxygen evolution reaction (OER). Under pressures above 6 GPa and temperatures of 100–700 °C, β-FeOOH transformed into ε-FeOOH, as in the case of α-FeOOH. However, the established pressure–temperature phase diagram of β-FeOOH differs from that of α-FeOOH, probably owing to its open framework structure and partial occupation of Cl⁻ ions. The OER activities of ε-FeOOH strongly depended on the FeOOH sources, synthesis conditions, and composite electrodes. Nevertheless, one of the ε-FeOOH samples exhibited a low OER overpotential compared with α-FeOOH and its parent β-FeOOH, which are widely used as OER catalysts. Hence, ε-FeOOH is a potential candidate as a next-generation earth-abundant OER catalyst.

Research on materials under extreme conditions such as high pressures provides new insights into the evolution and dynamics of the earth and space sciences, but recently, this research has focused on applications as functional materials.

A facile sequential ion exchange strategy to synthesize CoSe2/FeSe2 double-shelled hollow nanocuboids for the highly active and stable oxygen evolution reaction

Transition metal-based nanostructures have been considered as promising substitutes for rare-earth metal oxide electrocatalysts toward the oxygen evolution reaction (OER). Herein, we report for the first time on a novel multicomponent metal selenide electrocatalyst based on CoSe2/FeSe2 double-shelled hollow nanocuboids (CoSe2/FeSe2 DS-HNCs) with the highly oxidative Co3+ species, which is synthesized via a facile sequential ion exchange strategy. The solid Co-precursor nanocuboids are first converted into the intermediate Co2[Fe(CN)6] with a mesoporous and double-shelled hollow structure produced through a facile ligand exchange at room temperature, and then the final CoSe2/FeSe2 DS-HNCs are obtained by a subsequent Se ion exchange reaction. The intermediate product of Co2[Fe(CN)6] plays an important role not only in constructing a double-shelled hollow structure but also in providing the Fe source for the growth of the final multicomponent metal selenides. Benefiting from the nanosized double-shelled hollow structure and mesoporous double-metal selenide shells with the highly oxidative Co3+ species, the as-prepared CoSe2/FeSe2 DS-HNCs exhibit superior OER performance to state-of-the-art metal selenides, including a small overpotential of 240 mV at a current density of 10 mA cm-2 and the excellent electrochemical durability over 50 h. This work opens up a new avenue towards developing highly active multicomponent noble-metal-free electrocatalysts.

Boosting acetone oxidation efficiency over MnO2 nanorods by tailoring crystal phases

MnO₂ nanorods with different crystal phases (e.g. α-, β- and γ-MnO₂) exhibited distinct crystal-phase dependent catalytic performances for acetone oxidation.