Switchable Polymer Materials Controlled by Rotaxane Macromolecular Switches

Tunable Nano-Bending Structures of Loosened/Tightened Lassos with Bi-Stable Vibration-Induced Emissions for Multi-Manipulations of White-Light Emissions and Sensor Applications

The first tunable nano-bending structures of [1]rotaxane containing a single-fluorophoric N,N'-diphenyl-dihydrodibenzo[a,c]phenazine (DPAC) moiety (i.e., [1]RA) are developed as a loosened lasso structure to feature the bright white-light emission [CIE (0.27, 0.33), Φ = 21.2%] in THF solution, where bi-stable states of bending and twisted structures of DPAC unit in [1]RA produce cyan and orange emissions at 480 and 600 nm, respectively. With acid/base controls, tunable loosened/tightened nano-loops of corresponding [1]rotaxanes (i.e., [1]RA/[1]RB) can be achieved via the shuttling of macrocycles reversibly, and thus to adjust their respective white-light/cyan emissions, where the cyan emission of [1]RB is obtained due to the largest conformational constraint of DPAC moiety in its bending form of [1]RB with a tightened lasso structure. Additionally, the non-interlocked analog M-Boc only shows the orange emission, revealing the twisted form of DPAC fluorophore in M-Boc without any conformational constraint. Moreover, the utilization of solvents (with different viscosities and polarities), temperatures, and water fractions could serve as effective tools to adjust the bi-stable vibration-induced emission (VIE) colors of [1]rotaxanes. Finally, tuning ratiometric emission colors of adaptive conformations of DPAC moieties by altering nano-bending structures in [1]rotaxanes and external stimuli can be further developed as intelligent temperature and viscosity sensor materials.

Architectural Editing of Polyesters and Polyurethanes via Palladium(II)-Catalyzed [3,3]-Sigmatropic Oxo-Rearrangements

Architecture underlies the thermomechanical properties of polymers. Yet, few strategies are available to tune a polymer's architecture after it is prepared without altering its chemical composition. The ability to edit the architecture of a polymer would dramatically expand the accessible architecture-property space of polymeric materials. Herein, we disclose a backbone rearrangement approach to tune the short-chain branching of polymers. Specifically, we demonstrate that palladium(II)-catalyzed [3,3]-sigmatropic oxo-rearrangements can transform branched polyesters and polyurethanes to their linear counterparts. While the effects on materials properties are generally subtle in the case of polyesters, more dramatic changes are observed in the case of polyurethanes: two polyurethanes undergo a soluble-to-insoluble transition, and one exhibits a dramatic increase in both strain at break and toughness after rearrangement. Additionally, the incorporation of alkenes in the polymer backbone through the rearrangement enables facile deconstruction via ethenolysis. In all, we disclose a powerful and broad-scope strategy to edit the architecture of polymer backbones and thereby tune their physical and chemical properties.

Exciplex Formation by Complexation of an Electron-Accepting Guest in an Electron-Donating Pillar[5]arene Host Liquid

We present a novel system, a liquid-state pillar[5]arene decorated with tri(ethylene oxide) chains, that brings electron-donor and electron-acceptor molecules into proximity for efficient exciplex formation. The electron-accepting guests exhibit a blue-purple emission from a localized excited state upon excitation in common solvents. However, directly dissolving the guests in the electron-donating pillar[5]arene liquid (a bulk system) results in visible green emission from the formed exciplexes. In the bulk system, the guest molecules are always surrounded by excess pillar[5]arene molecules, resulting in the formation of mainly inclusion-type exciplexes. In the bulk system, energy migration occurs between the pillar[5]arene molecules. Excitation of the pillar[5]arenes results in a more intense green exciplex emission than that observed upon direct excitation of the guests. In summary, the pillar[5]arene liquid is a novel system for achieving efficient exciplex formation and energy migration that is different from typical solvent and solid systems.

Synthesis of 'Impossible' Rotaxanes

'Impossible' rotaxanes, which are constituted by interlocked components without obvious binding motifs, have attracted the interest of the mechanically interlocked molecules (MIMs) community. Within the synthetic efforts reported in the last decades towards the preparation of MIMs, some innovative protocols for accessing 'impossible' rotaxanes have been developed. This short review highlights different selected synthetic examples of 'impossible' rotaxanes, as well as suggests some future directions of this research area.

Force-controlled release of small molecules with a rotaxane actuator

Force-controlled release of small molecules offers great promise for the delivery of drugs and the release of healing or reporting agents in a medical or materials context1-3. In polymer mechanochemistry, polymers are used as actuators to stretch mechanosensitive molecules (mechanophores)4. This technique has enabled the release of molecular cargo by rearrangement, as a direct5,6 or indirect7-10 consequence of bond scission in a mechanophore, or by dissociation of cage11, supramolecular12 or metal complexes13,14, and even by 'flex activation'15,16. However, the systems described so far are limited in the diversity and/or quantity of the molecules released per stretching event1,2. This is due to the difficulty in iteratively activating scissile mechanophores, as the actuating polymers will dissociate after the first activation. Physical encapsulation strategies can be used to deliver a larger cargo load, but these are often subject to non-specific (that is, non-mechanical) release3. Here we show that a rotaxane (an interlocked molecule in which a macrocycle is trapped on a stoppered axle) acts as an efficient actuator to trigger the release of cargo molecules appended to its axle. The release of up to five cargo molecules per rotaxane actuator was demonstrated in solution, by ultrasonication, and in bulk, by compression, achieving a release efficiency of up to 71% and 30%, respectively, which places this rotaxane device among the most efficient release systems achieved so far1. We also demonstrate the release of three representative functional molecules (a drug, a fluorescent tag and an organocatalyst), and we anticipate that a large variety of cargo molecules could be released with this device. This rotaxane actuator provides a versatile platform for various force-controlled release applications.

Exploiting the Mechanical Bond Effect for Enhanced Molecular Recognition and Sensing

The ubiquity of charged species in biological and industrial processes has resulted in ever-increasing interest in their selective recognition, detection, and environmental remediation. Building on the established coordination chemistry principles of the chelate and macrocyclic effects, and host preorganization, supramolecular chemists seek to construct specific 3D binding cavities reminiscent of biotic systems to enhance host-guest binding affinity and selectivity. Mechanically interlocked molecules (MIMs) present a wholly unique platform for synthetic host design, wherein topologies afforded by the mechanical bond enable the decoration of 3D cavities for non-covalent interactions with a range of target guest geometries. Notably, MIM host systems exhibit mechanical bond effect augmented affinities and selectivities for a variety of charged guest species, compared to non-interlocked acyclic and macrocycle host analogs. Furthermore, the modular nature of MIM synthesis facilitates incorporation of optical and electrochemical reporter groups, enabling fabrication of highly sensitive and specific molecular sensors. This review discusses the development of recognition and sensing MIMs, from the first reports in the late 20th century through to the present day, delineating how their topologically preorganized and dynamic host cavities enhance charged guest recognition and sensing, demonstrating the mechanical bond effect as a potent tool in future chemosensing materials.

Kinetically controlled synthesis of rotaxane geometric isomers

Geometric isomerism in mechanically interlocked systems-which arises when the axle of a mechanically interlocked molecule is oriented, and the macrocyclic component is facially dissymmetric-can provide enhanced functionality for directional transport and polymerization catalysis. We now introduce a kinetically controlled strategy to control geometric isomerism in [2]rotaxanes. Our synthesis provides the major geometric isomer with high selectivity, broadening synthetic access to such interlocked structures. Starting from a readily accessible [2]rotaxane with a symmetrical axle, one of the two stoppers is activated selectively for stopper exchange by the substituents on the ring component. High selectivities are achieved in these reactions, based on coupling the selective formation reactions leading to the major products with inversely selective depletion reactions for the minor products. Specifically, in our reaction system, the desired (major) product forms faster in the first step, while the undesired (minor) product subsequently reacts away faster in the second step. Quantitative 1H NMR data, fit to a detailed kinetic model, demonstrates that this effect (which is conceptually closely related to minor enantiomer recycling and related processes) can significantly improve the intrinsic selectivity of the reactions. Our results serve as proof of principle for how multiple selective reaction steps can work together to enhance the stereoselectivity of synthetic processes forming complex mechanically interlocked molecules.

P/M Macromolecular Switch Based on Conformational Control Exerted by an Achiral Side Chain within an Axially Chiral Locked Pendant

Molecular switches, supramolecular chemistry, and polymers can be combined to create stimuli-responsive multichiral materials. Therefore, by acting on the extended/bent conformational composition of an achiral arm, it is possible to create a macromolecular gear, where different supramolecular interactions can be activated/deactivated to control the helical sense of a polymer containing up to five different chiral axial motifs. For this, a chiral allene with a flexible achiral arm was introduced as a pendant in poly(phenylacetylene). Through flexible arm control between extended and bent conformations, it is possible to selectively induce either a P or M helical sense in the polymer, while the relative spatial distribution of the substituents in the allene remains unaltered in two perpendicular planes (configurationally locked). These results show that complex dynamic multichiral materials can be obtained by the polymerization of appropriate monomers that combine chirality, switching properties, and the ability to generate chiral supramolecular assemblies.

Daisy chain architectures: from discrete molecular entities to polymer materials

Daisy chain architectures, made by the self-complementary threading of an axle covalently linked to a macrocycle, represent a particularly intriguing family of supramolecular and mechanically interlocked (macro)molecules. In this review, we discuss their recent history, their modular chemical structures, and the various synthetic strategies to access them. We also detail how their internal sliding motions can be controlled and how their integration within polymers can amplify that motions up to the macroscopic scale. This overview of the literature demonstrates that the peculiar structure and dynamics of daisy chains have already strongly influenced the research on artificial molecular machines, with the potential to be implemented from nanometric switchable devices to mechanically active soft-matter materials.

Mechanically Interlocked [2]Rotaxane Aerogels with Tunable Morphologies and Mechanical Properties

Mechanical bonds have been utilized as promising motifs to construct mechanically interlocked aerogels (MIAs) with mechanical adaptivity and multifunctionality. However, fabricating such aerogels with not only precise chemical structures but also dynamic features remains challenging. Herein, we present MIAs carrying dense [2]rotaxane units, which bestow both the stability and flexibility of the aerogel network. Owing to the stable chemical structure of a [2]rotaxane, MIAs possessing a precise and full-scale mechanically interlocked network could be fabricated with the aid of diverse solvents. In addition, the dynamic nature of the [2]rotaxane resulted in morphologies and mechanical performances of the MIAs that can be dramatically modulated under chemical stimuli. We hope that the structure-property relationship in MIAs will facilitate the development of mechanically interlocked materials and provide novel opportunities toward constructing smart materials with multifunctionalities.

Stimuli-responsive rotaxane-branched dendronized polymers with tunable thermal and rheological properties

Aiming at the creation of polymers with attractive dynamic properties, herein, rotaxane-branched dendronized polymers (DPs) with rotaxane-branched dendrons attached onto the polymer chains are proposed. Starting from macromonomers with both rotaxane-branched dendrons and polymerization site, targeted rotaxane-branched DPs are successfully synthesized through ring-opening metathesis polymerization (ROMP). Interestingly, due to the existence of multiple switchable [2]rotaxane branches within the attached dendrons, anion-induced reversible thickness modulation of the resultant rotaxane-branched DPs is achieved, which further lead to tunable thermal and rheological properties, making them attractive platform for the construction of smart polymeric materials.

Balancing ring and stopper group size to control the stability of doubly threaded [3]rotaxanes

Synthesizing doubly threaded [3]rotaxanes requires the use of larger rings than more traditional singly threaded [2]rotaxanes. A key challenge in accessing stable doubly threaded [3]rotaxanes with large rings is finding the right combination of ring to stopper size. In this study, a series of doubly threaded [3]rotaxanes derived from five different sized macrocycles in the size range of 40-48 atoms and two different stopper groups, which contain 1 or 2 tris(p-t-butylbiphenyl)methyl moieties, were prepared and their kinetic stability examined. These interlocked compounds were synthesized using a metal-templated approach and fully characterized utilizing a combination of mass spectrometry, NMR spectroscopy, and size-exclusion chromatography techniques. The effect of ring size on the stability of the doubly threaded [3]rotaxane was investigated via kinetic stability tests monitored using 1H-NMR spectroscopy. By tightening the macrocycle systematically every 2 atoms from 48 to 40 atoms, a wide range of doubly threaded interlocked molecules could be accessed in which the rate of room temperature slippage of the macrocycle from the dumbbells could be tuned. Using the larger stopper group with a 48-atom ring results in no observable rotaxane, 46-44 atom macrocycles result in metastable rotaxane species with a slippage half-life of ∼5 weeks and ∼9 weeks, respectively, while macrocycles of 42 atoms or smaller yield a stable rotaxane. The smaller sized stopper is not able to fully stabilize any of the [3]rotaxane structures but metastable [3]rotaxanes are obtained with slippage half-lives of 25 ± 2 hours and 13 ± 1 days using macrocycles with 42 or 40 atoms, respectively. These results highlight the dramatic effect that relatively small ring size changes can have on the structure of doubly threaded [3]rotaxanes and lay the synthetic groundwork for a range of higher order doubly threaded interlocked architectures.

Light-responsive rotaxane-based materials: inducing motion in the solid state

Light-responsive rotaxane-based solid-state materials are ideal scaffolds in order to develop smart materials due to the properties provided by the mechanical bond, such as control over the dynamics of the components upon application of external stimuli. This perspective aims to highlight the relevance of these materials, by pointing out recent examples of photoresponsive materials prepared from a rotaxanated architecture in which motion of the counterparts and/or macroscopic motion of the interlocked materials are achieved. Although further development is needed, these materials are envisioned as privileged scaffolds which will be used for different advanced applications in the area of molecular machinery.

Photoactivated Artificial Molecular Motors

Accurate control of long-range motion at the molecular scale holds great potential for the development of ground-breaking applications in energy storage and bionanotechnology. The past decade has seen tremendous development in this area, with a focus on the directional operation away from thermal equilibrium, giving rise to tailored man-made molecular motors. As light is a highly tunable, controllable, clean, and renewable source of energy, photochemical processes are appealing to activate molecular motors. Nonetheless, the successful operation of molecular motors fueled by light is a highly challenging task, which requires a judicious coupling of thermal and photoinduced reactions. In this paper, we focus on the key aspects of light-driven artificial molecular motors with the aid of recent examples. A critical assessment of the criteria for the design, operation, and technological potential of such systems is provided, along with a perspective view on future advances in this exciting research area.

Controllable Aggregation-Induced Emission and Förster Resonance Energy Transfer Behaviors of Bistable [c2] Daisy Chain Rotaxanes for White-Light Emission and Temperature-Sensing Applications

Bistable [c2] daisy chain rotaxanes with respective extended and contracted forms of [c2]A and [c2]B containing a blue-emissive anthracene (AN) donor and orange-emissive indandione-carbazole (IC) acceptor were successfully synthesized via click reaction. Tunable-emission bistable [c2] daisy chain rotaxanes with fluorescence changes from blue to orange, including bright-white-light emissions, could be modulated by the aggregation-induced emission (AIE) characteristics and Förster resonance energy transfer (FRET) processes through altering water fractions and shuttling processes (i.e., acid/base controls). Accordingly, as a result of excellent fine-tuning AIE (at 60% water content of H₂O/THF) and FRET (with a compatible energy transfer of E_FRET = 33.2%) behaviors after the shuttling process (by adding base), the brightest white-light emission at CIE (0.31, 0.37) with a quantum yield of Φ = 15.64% was obtained in contracted [c2]B with good control of molecular shuttling to possess higher photoluminescence (PL) quantum yields and better energy transfer efficiencies (i.e., the manipulation of reduced PET and enhanced FRET processes) due to their intramolecular aggregations of blue AN donors and orange IC acceptors with a proper water content of 60% H₂O. Furthermore, dynamic light-scattering (DLS) and time-resolved photoluminescence (TRPL) measurements, along with theoretical calculations, were utilized to investigate and confirm AIE and FRET phenomena of bistable [c2] daisy chain rotaxanes. Especially, both bistable [c2] daisy chain rotaxanes [c2]A and [c2]B and noninterlocked monomer M could be exploited for the applications of ratiometric fluorescence temperature sensing due to the temperature effects on the AIE and FRET features. Based on these desirable bistable [c2] daisy chain rotaxane structures, this work provides a potential strategy for the future applications of tunable multicolor emission and ratiometric fluorescence temperature-sensing materials.

Speed Tuning of the Formation/Dissociation of a Metallorotaxane

Switching between the formation/dissociation of rotaxanes is important to control the function of various types of rotaxane-based materials. We have developed a convenient and simple strategy, the so-called "accelerator addition", to make a static rotaxane dynamic without apparently affecting the chemical structure. As an interlocked molecule that enables tuning of the formation/dissociation speed, a metallorotaxane was quantitatively generated by the complexation of a triptycene-based dumbbell-shaped mononuclear complex, [PdL₂ ]²⁺ (L=2,3-diaminotriptycene), with 27C9. As a result of the inertness of the Pd²⁺ -based coordination structure, the metallorotaxane was slowly formed (the static state). This rotaxane formation was accelerated 27 times simply by adding Br^- as an accelerator (the dynamic state). A similar drastic acceleration was also demonstrated during the dissociation process when Cs⁺ was added to the metallorotaxane to form the free axle [PdL₂ ]²⁺ and the 27C9-Cs⁺ complex.

Solvent effects on the motion of a crown ether/amino rotaxane

Solvents have been recognized as a significant factor for modulating the shuttle of rotaxanes and regulating their functions regarding molecular machines by a lot of published studies. The mechanism of the effects of solvents on the motion of crown ether/amino rotaxanes, however, remains unclear. In this work, a rotaxane, formed by dibenzo-24-crown-8 (C[8]) and a dumbbell-shaped axle with two positively charged amino groups, was investigated at the atom level. Two-dimensional free-energy landscapes characterizing the conformational change of C[8] and the shuttling motions in chloroform and water were mapped. The results indicated that the barriers in water were evidently lower than those in chloroform. By analyzing the trajectories, there was no obvious steric effect during shuttling. Instead, the main driving force of shuttling was verified from electrostatic interactions, especially strong hydrogen bonding interactions between the axle and water, which resulted in the fast shuttling rate of the rotaxane. All in all, the polarity and hydrogen bond-forming ability of solvents are the main factors in affecting the shuttling rate of a crown ether/amino rotaxane. In addition, C[8] would adopt S-shaped conformations during shuttling except for situating in the amino sites with C-shaped ones adopted due to π-π stacking interactions. The results of this research improve the comprehension of the solvent modulation ability for shuttling in crown ether-based rotaxanes and illustrate the effects of structural modifications on motions. These new insights are expected to serve the efficient design and construction of molecular machines.

Rotaxane nanomachines in future molecular electronics

As the electronics industry is integrating more and more new molecules to utilize them in logic circuits and memories to achieve ultra-high efficiency and device density, many organic structures emerged as promising candidates either in conjunction with or as an alternative to conventional semiconducting materials such as but not limited to silicon. Owing to rotaxane's mechanically interlocked molecular structure consisting of a dumbbell-shaped molecule threaded through a macrocycle, they could be excellent nanomachines in molecular switches and memory applications. As a nanomachine, the macrocycle of rotaxane can move reversibly between two stations along its axis under external stimuli, resulting in two stable molecular configurations known as "ON" and "OFF" states of the controllable switch with distinct resistance. There are excellent reports on rotaxane's structure, properties, and function relationship and its application to molecular electronics (Ogino, et al., 1984; Wu, et al., 1991; Bissell, et al., 1994; Collier, et al., 1999; Pease, et al., 2001; Chen, et al., 2003; Green, et al., 2007; Jia, et al., 2016). This comprehensive review summarizes [2]rotaxane and its application to molecular electronics. This review sorts the major research work into a multi-level pyramid structure and presents the challenges of [2]rotaxane's application to molecular electronics at three levels in developing molecular circuits and systems. First, we investigate [2]rotaxane's electrical characteristics with different driving methods and discuss the design considerations and roles based on voltage-driven [2]rotaxane switches that promise the best performance and compatibility with existing solid-state circuits. Second, we examine the solutions for integrating [2]rotaxane molecules into circuits and the limitations learned from these devices keep [2]rotaxane active as a molecular switch. Finally, applying a sandwiched crossbar structure and architecture to [2]rotaxane circuits reduces the fabrication difficulty and extends the possibility of reprogrammable [2]rotaxane arrays, especially at a system level, which eventually promotes the further realization of [2]rotaxane circuits.

CB[7]- and CB[8]-Based [2]-(Pseudo)rotaxanes with Triphenylphosphonium-Capped Threads: Serendipitous Discovery of a New High-Affinity Binding Motif

The synthesis of new triphenylphosphonium-capped cucurbit[7]uril (CB[7])- and cucurbit[8]uril (CB[8])-based [2]rotaxanes was achieved by a simultaneous threading-capping strategy. While the use of CB[7] produced the designed [2]rotaxane, attempts to obtain the CB[8] analogue were unsuccessful due to the unexpected strong interaction found between the host and the phosphonium caps leading to pseudo-heteroternary host–guest complexes. This unusual binding motif has been extensively studied experimentally, with results in good agreement with those obtained by dispersion-corrected DFT methods.

Controlling catalyst activity, chemoselectivity and stereoselectivity with the mechanical bond

Mechanically interlocked molecules, such as rotaxanes and catenanes, are receiving increased attention as scaffolds for the development of new catalysts, driven by both their increasing accessibility and high-profile examples of the mechanical bond delivering desirable behaviours and properties. In this Review, we survey recent advances in the catalytic applications of mechanically interlocked molecules organized by the effect of the mechanical bond on key catalytic properties, namely, activity, chemoselectivity and stereoselectivity, and focus on how the mechanically bonded structure leads to the observed behaviour. Our aim is to inspire future investigations of mechanically interlocked catalysts, including those outside of the supramolecular community.

Maximizing the [c2]daisy chain to lasso ratio through competitive self-templating clipping reactions

Self-templating two-component coupling reactions allowed the isolation of two threaded products with different molecular sizes: a lasso-type [1]rotaxane and a [c2]daisy chain rotaxane. Their distribution in the final reaction mixture varies as a factor of the concentration of the reactants. Through this methodology we obtained a large 84-membered cyclic multistation [2]rotaxane.

Sigmatropic Rearrangements of Polymer Backbones: Vinyl Polymers from Polyesters in One Step

Polymer modification is a fundamental scientific challenge, as a means of both upcycling plastics and extracting a stimulus response from them. To date, the overwhelming majority of polymer modifications has focused on the polymer periphery. Herein, we demonstrate nearly quantitative, scission-free modification of polymer backbones, namely, a metamorphosis of polyesters into vinyl polymers resembling commodity materials via the Ireland-Claisen sigmatropic rearrangement. The glass transition temperature (T_g) and thermal stability of the polyesters undergo dramatic changes post-transformation. Beyond polymer modification, our work advances the application of retrosynthetic analysis in polymer synthesis; the nontraditional production of vinyl polymers from lactones opens the door to a slew of previously inaccessible materials.

Topology-transformable block copolymers based on a rotaxane structure: change in bulk properties with same composition

The topology of polymers affects their characteristic features, i.e., their microscopic structure and macroscopic properties. However, the topology of a polymer is usually fixed during the construction of the polymer chain and cannot be transformed after its determination during the synthesis. In this study, topology-transformable block copolymers that are connected via rotaxane linkages are introduced. We will present systems in which the topology transformation of block copolymers changes their 1) microphase-separated structures and 2) macroscopic mechanical properties. The combination of a rotaxane structure at the junction point and block copolymers that spontaneously form microphase-separated structures in the bulk provides access to systems that cannot be attained using conventional covalent bonds.

Self-Assembly of Stimuli-Responsive [2]Rotaxanes by Amidinium Exchange

Advances in supramolecular chemistry are often underpinned by the development of fundamental building blocks and methods enabling their interconversion. In this work, we report the use of an underexplored dynamic covalent reaction for the synthesis of stimuli-responsive [2]rotaxanes. The formamidinium moiety lies at the heart of these mechanically interlocked architectures, because it enables both dynamic covalent exchange and the binding of simple crown ethers. We demonstrated that the rotaxane self-assembly follows a unique reaction pathway and that the complex interplay between crown ether and thread can be controlled in a transient fashion by addition of base and fuel acid. Dynamic combinatorial libraries, when exposed to diverse nucleophiles, revealed a profound stabilizing effect of the mechanical bond as well as intriguing reactivity differences between seemingly similar [2]rotaxanes.

Direct synthetic routes to functionalised crown ethers

Crown ethers are macrocyclic hosts that can complex a wide range of inorganic and organic cations as well as neutral guest species. Their widespread utilization in several areas of fundamental and applied chemistry strongly relies on strategies for their functionalisation, in order to obtain compounds that could carry out multiple functions and could be incorporated in sophisticated systems. Although functionalised crown ethers are normally synthesised by templated macrocyclisation using appropriately substituted starting materials, the direct addition of functional groups onto a pre-formed macrocyclic framework is a valuable yet underexplored alternative. Here we review the methodologies for the direct functionalisation of aliphatic and aromatic crown ethers sporadically reported in the literature over a period of four decades. The general approach for the introduction of moieties on aliphatic crown ethers involves a radical mediated cross dehydrogenative coupling initiated either by photochemical or thermal/chemical activation, while aromatic crown ethers are commonly derivatised via electrophilic aromatic substitution. Direct functionalization routes can reduce synthetic effort, allow the later modification of crown ether-based architectures, and disclose new ways to exploit these versatile macrocycles in contemporary supramolecular science and technology.

Stereodynamics of E/Z isomerization in rotaxanes through mechanical shuttling and covalent bond rotation

The mechanical bond has opened a new world for structural and dynamic stereochemistry, which is still largely underexplored and whose significance for various applications is becoming increasingly evident. We demonstrate that designed rearrangements involving both covalent and mechanical bonds can be integrated in [2]rotaxanes, leading to interesting consequences in terms of E/Z isomerization mechanisms. Two entirely distinct and concomitant stereomutations, pertaining to the same stereogenic element but involving different kinds of linkages within the molecule, are observed and are thoroughly characterized. The rate of the two processes is affected in opposite ways upon changing solvent polarity; such a phenomenon can be used to selectively modify the rate of each motion and adjust the relative contribution of the two mechanisms to the isomerization. Although the movements are not synchronized, an analysis of the intriguing fundamental implications for transition state theory, reaction pathway bifurcation, and microscopic reversibility was triggered by our experimental observations.

•

Rotaxanes that display E/Z stereoisomerism depending on the ring position

•

Co-existence of two different stereomutations that yield the same product

•

Mutual influence and opposite solvent dependence of the two dynamic processes

•

Fundamental implications for microscopic reversibility and chemical equilibrium

The concurrence and interplay of different movements of molecular components within the same structure play a key role in providing function to naturally occurring molecular machines. Despite the progress made on artificial counterparts, the construction of molecular systems, where two (or more) motions are integrated together to produce an outcome, is still in its infancy. Molecules called rotaxanes, obtained by interlocking a ring with a dumbbell-shaped axle, are an appealing yet underexplored platform for this purpose. Here, we describe rotaxanes where two coexisting and radically different processes—rotation about a covalent bond and translation of the ring along the axle—lead to the same change in the overall molecular shape. These results are significant not only to improve our fundamental understanding of the way molecular components move but also to develop sophisticated artificial nanomachines capable of transforming or transmitting motion.

A Mortise-and-Tenon Joint Inspired Mechanically Interlocked Network

Mortise-and-tenon joints have been widely used for thousands of years in wooden architectures in virtue of their artistic and functional performance. However, imitation of similar structural and mechanical design philosophy to construct mechanically adaptive materials at the molecular level is a challenge. Herein, we report a mortise-and-tenon joint inspired mechanically interlocked network (MIN), in which the [2]rotaxane crosslink not only mimics the joint in structure, but also reproduces its function in modifying mechanical properties of the MIN. Benefiting from the hierarchical energy dissipative ability along with the controllable intramolecular movement of the mechanically interlocked crosslink, the resultant MIN simultaneously exhibits notable mechanical adaptivity and structural stability in a single system, as manifested by decent stiffness, strength, toughness, and deformation recovery capacity.

Thermally Responsive Poly(ethylene oxide)-Based Polyrotaxanes Bearing Hydrogen-Bonding Pillar[5]arene Rings*

Poly(ethylene oxide)s (PEOs) are useful polymers with good water solubility, biological compatibility, and commercial availability. PEOs with various end groups were threaded into pillar[5]arene rings in a mixture of water and methanol to afford pseudopolyrotaxanes. Corresponding polyrotaxanes were also constructed by capping COOH-terminated pseudopolyrotaxanes with bulky amines, in which multiple hydrogen bonds involving the pillar[5]arene OH groups were critically important to prevent dethreading. The number of threaded ring components could be rationally controlled in these materials, providing a simple and versatile method to tune the mechanical and thermal properties. Specifically, a polyrotaxane with a high-molecular-weight axle became elastic upon heating above the melting point of PEOs and exhibited temperature-dependent shape memory property because of the topological confinement and crosslinked hydrogen bonds.

Stimulus-Responsive Supercooled π-Conjugated Liquid and Its Application in Rewritable Media

Herein, we report a stimulus-responsive supercooled π-conjugated liquid and the possibility of its application in rewritable media. Supercooled liquid 1 showed a dramatic change in its photoluminescent color upon the transformation from liquid 1l (yellow emission) to solid 1s (green emission). These phenomena were revealed by fluorescence spectra as well as lifetime decay profiles.

Reversible cyclic-linear topological transformation using a long-range rotaxane switch

A reversible linear-cyclic topological transformation of polymers facilitated by a long-range rotaxane switch.

An orthogonal photoresponsive tristable [3]rotaxane with non-destructive readout

An orthogonal photoresponsive [3]rotaxane is constructed by introducing two orthogonal photoswitchable azobenzene binding sites, and it features reversible photoregulated tristate absorption spectral changes with non-destructive readout capability.

Synthetic strategies towards mechanically interlocked oligomers and polymers

Mechanically interlocked molecules have fascinated chemists for decades. Initially a tantalising synthetic challenge, interlocked molecules have continued to capture the imagination for their aesthetics and, increasingly, for their potential as molecular machines and use in materials applications. Whilst preliminary statistical attempts to prepare these molecules were exceedingly inefficient, a raft of template-directed strategies have now been realised, providing a vast toolbox from which chemists can access interlocked structures in excellent yields. For many envisaged applications it is desirable to move away from small, discrete interlocked molecules and turn to oligomers and polymers instead, either due to the need for multiple mechanical bonds within the desired material, or to exploit an extended scaffold for the organisation and arrangement of individual mechanically interlocked units. In this tutorial-style review we outline the synthetic strategies that have been employed for the synthesis of mechanically interlocked oligomers and polymers, including oligo-/polymerisation of (pseudo)interlocked precursors, metal-organic self-assembly, the use of orthogonal template motifs, iterative approaches and grafting onto polymer backbones.

Woven Polymer Networks via the Topological Transformation of a [2]Catenane

Weaving technology has been widely used to manufacture macroscopic fabrics to meet the artistic and practical needs of humanity for thousands of years. However, the fabrication of molecular fabrics with fascinating topologies and unique mechanical properties represents a significant challenge. Herein, we describe a topological transformation strategy to construct woven polymer networks (WPNs) at the molecular level via ring-opening metathesis polymerization (ROMP) of a zinc-template [2]catenane. The key feature of this approach is the exploitation of the pre-existing catenane crossing points that maintain the dense woven structure and the flexible alkyl chains on the [2]catenane that synergistically work with the crossing points to modulate the physicochemical and mechanical properties of the woven materials. As a result, the WPN possesses a certain degree of flexibility and stretchability, as well as high thermostability and mechanical robustness. Furthermore, we could remove the zinc ions to endow the WPN with more degrees of freedom and then enhance its mechanical behaviors by remetalation. This study not only provides a novel strategy toward woven materials with intriguing structural features and emergent mechanical adaptivities, but also highlights that mechanically interlocked molecules could offer unique opportunities for the construction of smart supramolecular materials with peculiar interlaced topologies at the molecular scale.

Recent advances in higher order rotaxane architectures

Despite dramatic advances in the template-directed synthesis of archetypal [2]rotaxanes, higher order rotaxanes with multiple molecular components (rings or dumbbells) are relatively daunting subjects owing to their synthetic challenges. With unique interlocked architectures, higher order rotaxanes have found applications in artificial molecular machines. In this feature article, we will focus on the recent advances in higher order rotaxanes with well-defined structures. Different types of rotaxane architectures will be described, and their synthetic approaches will be highlighted. Moreover, the stimuli-responsive molecular motion with increasing complexity in these diverse architectures will also be discussed.