Bottlebrush Polymer Excipients Enhance Drug Solubility: Influence of End-Group Hydrophilicity and Thermoresponsiveness

A general synthesis of cyclic bottlebrush polymers with enhanced mechanical properties via graft-through ring expansion metathesis polymerization

Bottlebrush polymers represent an important class of macromolecular architectures, with applications ranging from drug delivery to organic electronics. While there is an abundance of literature describing the synthesis, structure, and applications of linear bottlebrush polymers using ring-opening metathesis polymerization (ROMP), there are comparatively less reports on their cyclic counterparts. This lack of research is primarily due to the difficulty in synthesizing cyclic bottlebrush polymers, as extensions of typical routes towards linear bottlebrush polymers (i.e., "grafting-through" polymerizations of macromonomers with ROMP) produce only ultrahigh molar mass cyclic bottlebrush polymers with poor molar mass control. Herein, we report a ring-expansion metathesis polymerization (REMP) approach to cyclic bottlebrush polymers via a "grafting-through" approach utilizing the active pyr-CB6 initiator developed in our lab. The resulting polymers, characterized via GPC-MALS-IV, are shown to have superior molar mass control across a range of target backbone lengths. The cyclic materials are also found to have superior mechanical properties when compared to their linear counterparts, as assessed by ball-mill grinding and compression testing experiments.

Modifying the Backbone Chemistry of PEG-Based Bottlebrush Block Copolymers for the Formation of Long-Circulating Nanoparticles

Nanoparticle physicochemical properties have received great attention in optimizing the performance of nanoparticles for biomedical applications. For example, surface functionalization with small molecules or linear hydrophilic polymers is commonly used to tune the interaction of nanoparticles with proteins and cells. However, it is challenging to control the location of functional groups within the shell for conventional nanoparticles. Nanoparticle surfaces composed of shape-persistent bottlebrush polymers allow hierarchical control over the nanoparticle shell but the effect of the bottlebrush backbone on biological interactions is still unknown. The synthesis is reported of novel heterobifunctional poly(ethylene glycol) (PEG)-norbornene macromonomers modified with various small molecules to form bottlebrush polymers with different backbone chemistries. It is demonstrated that micellar nanoparticles composed of poly(lactic acid) (PLA)-PEG bottlebrush block copolymer (BBCP) with neutral and cationic backbone modifications exhibit significantly reduced cellular uptake compared to conventional unmodified BBCPs. Furthermore, the nanoparticles display long blood circulation half-lives of ≈22 hours and enhanced tumor accumulation in mice. Overall, this work sheds light on the importance of the bottlebrush polymer backbone and provides a strategy to improve the performance of nanoparticles in biomedical applications.

Unveiling the Architectural Impact on the Salt-Tunable Adhesion Performance and Toughness of Polyzwitterions

Developing tough adhesives with superior strength and ductility is challenging yet highly sought-after. In this work, we address a strategic approach to achieving diverse toughness and performance by meticulously harnessing weak electrostatic interactions. Two polyzwitterions (PZIs), derived from sulfobetaine methacrylate (SBMA), of different topologies: bottlebrush (BB-PSBMA) and linear (L-PSBMA), were designed. BB-PSBMA was synthesized using a rational "grafting-from" strategy, while L-PSBMA was prepared via atom transfer radical polymerization. Despite their architectural disparities, both PZIs demonstrated a comparable substantial lap-shear adhesion strength of ∼0.4 MPa. Intriguingly, the introduction of NaCl during adhesive preparation revealed contrasting adhesion behaviors. BB-PSBMA transitioned from a strong-brittle to strong-ductile adhesive upon the addition of 70 mM NaCl, evidenced by a 77.4% increase in the work of debonding, i.e., toughness. Further increases in NaCl concentration continued to impart the ductile properties to BB-PSBMA. Conversely, L-PSBMA adhesive predominantly transformed from strong-brittle to ductile regardless of the salt content. We propose a synergistic mechanism involving viscosity-governed optimal adhesion-cohesion balance and mechanical energy dissipation through sacrificial electrostatic association to elucidate the strong and ductile nature of the BB-PSBMA adhesive at 70 mM NaCl. Our findings emphasize the significance of precise control over architecture and salt concentration is necessary in constructing adhesives with enhanced toughness and performance.

Beyond Traditional Stimuli: Exploring Salt-Responsive Bottlebrush Polymers-Trends, Applications, and Perspectives

Bottlebrush polymers represent an important class of high-density side-chain-grafted polymers traditionally with high molecular weights, in which one or more polymeric side chains are tethered to each repeating unit of a linear polymer backbone, such that these macromolecules look like "bottlebrushes". The arrangement of molecular brushes is determined by side chains located at a distance considerably smaller than their unperturbed dimensions, leading to substantial monomer congestion and entropically unfavorable extension of both the backbone and the side chains. Traditionally, the conformation and physical properties of polymers are influenced by external stimuli such as solvent, temperature, pH, and light. However, a unique stimulus, salt, has recently gained attention as a means to induce shape changes in these molecular brushes. While the stimulus has been less researched to date, we see that these systems, when stimulated with salts, have the potential to be used in various engineering applications. This potential stems from the unique properties and behaviors these systems show when exposed to different salts, which could lead to new solutions and improvements in engineering processes, thus serving as the primary motivation for this narrative, as we aim to explore and highlight the various ways these systems can be utilized and the benefits they could bring to the field of engineering. This Review aims to introduce the concept of stimuli-responsive bottlebrush polymers, explore the evolutionary trajectory, delve into current trends in salt-responsive bottlebrush polymers, and elucidate how these polymers are addressing a variety of engineering challenges.

Nonlinear Elastic Bottlebrush Polymer Hydrogels Modulate Actomyosin Mediated Protrusion Formation in Mesenchymal Stromal Cells

The nonlinear elasticity of many tissue-specific extracellular matrices is difficult to recapitulate without the use of fibrous architectures, which couple strain-stiffening with stress relaxation. Herein, bottlebrush polymers are synthesized and crosslinked to form poly(ethylene glycol)-based hydrogels and used to study how strain-stiffening behavior affects human mesenchymal stromal cells (hMSCs). By tailoring the bottlebrush polymer length, the critical stress associated with the onset of network stiffening is systematically varied, and a unique protrusion-rich hMSC morphology emerges only at critical stresses within a biologically accessible stress regime. Local cell-matrix interactions are quantified using 3D traction force microscopy and small molecule inhibitors are used to identify cellular machinery that plays a critical role in hMSC mechanosensing of the engineered, strain-stiffening microenvironment. Collectively, this study demonstrates how covalently crosslinked bottlebrush polymer hydrogels can recapitulate strain-stiffening biomechanical cues at biologically relevant stresses and be used to probe how nonlinear elastic matrix properties regulate cellular processes.

Photonic Pigments of Polystyrene-block-Polyvinylpyrrolidone Bottlebrush Block Copolymers via Sustainable Organized Spontaneous Emulsification

Prior studies on photonic pigments of amphiphilic bottlebrush block copolymers (BBCPs) through an organized spontaneous emulsification (OSE) mechanism have been limited to using polyethylene glycol (PEG) as the hydrophilic side chains and toluene as the organic phase. Herein, a family of polystyrene-block-polyvinylpyrrolidone (PS-b-PVP) BBCPs are synthesized with PVP as the hydrophilic block. Biocompatible and sustainable anisole is employed for dissolving the obtained BBCPs followed by emulsification of the solutions in water. Subsequent evaporation of oil-in-water emulsion droplets triggers the OSE mechanism, producing thermodynamically stable water-in-oil-in-water (w/o/w) multiple emulsions with uniform and closely packed internal droplet arrays through the assembly of the BBCPs at the w/o interface. Upon solidification, the homogeneous porous structures are formed within the photonic microparticles that exhibit visible structural colors. The pore diameter is widely tunable (150∼314 nm) by changing the degree of polymerization of BBCP (69∼110), resulting in tunable colors across the whole visible spectrum. This work demonstrates useful knowledge that OSE can be generally used in the fabrication of ordered porous materials with tunable internal functional groups, not only for photonic applications, but also offers a potential platform for catalysis, sensing, separation, encapsulation, etc.

Drug-Polymer Nanodroplet Formation and Morphology Drive Solubility Enhancement of GDC-0810

Nanodroplet formation is important to achieve supersaturation of active pharmaceutical ingredients (APIs) in an amorphous solid dispersion. The aim of the current study was to explore how polymer composition, architecture, molar mass, and surfactant concentration affect polymer-drug nanodroplet morphology with the breast cancer API, GDC-0810. The impact of nanodroplet size and morphology on dissolution efficacy and drug loading capacity was explored using polarized light microscopy, dynamic light scattering, and cryogenic transmission electron microscopy. Poly(N-isopropylacrylamide-stat-N,N-dimethylacrylamide) (PND) was synthesized as two linear derivatives and two bottlebrush derivatives with carboxylated or PEGylated end-groups. Hydroxypropyl methylcellulose acetate succinate grade MF (HPMCAS-MF) and poly(vinylpyrrolidone-co-vinyl acetate) (PVPVA) were included as commercial polymer controls. We report the first copolymerization synthesis of a PVPVA bottlebrush copolymer, which was the highest performing excipient in this study, maintaining 688 μg/mL GDC-0810 concentration at 60 wt % drug loading. This is likely due to strong polymer-drug noncovalent interactions and the compaction of GDC-0810 along the PVPVA bottlebrush backbone. Overall, it was observed that the most effective formulations had a hydrodynamic radius less than 25 nm with tightly compacted nanodroplet morphologies.

Research progress on the conformational properties of comb-like polymers in dilute solutions

As a special type of branched polymers, comb-like polymers simultaneously possess the structural characteristics of a linear backbone profile and crowded sidechain branches/grafts, and such structural uniqueness leads to reduced interchain entanglement, enhanced molecular orientation, and unique stimulus-response behavior, which greatly expands the potential applications in the fields of super-soft elastomers, molecular sensors, lubricants, photonic crystals, etc. In principle, all these molecular features can be traced back to three structural parameters, i.e., the degree of polymerization of the backbone (Nb), the degree of polymerization of the graft sidechain (Ng), and the grafting density (σ). Consequently, it is of great importance to understand the correlation mechanism between the structural characteristics and physicochemical properties, among which, the conformational properties in dilute solution have received the most attention due to its central position in polymer science. In the past decades, the development of synthetic chemistry and characterization techniques has greatly stimulated the progress of this field, and a number of experiments have been executed to verify the conformational properties; however, due to the complexity of the structural parameters and the diversity of the chemical design, the achieved experimental progress displays significant controversies compared with the theoretical predictions. This review aims to provide a full picture of recent research progress on this topic, specifically, (1) first, a few classical theoretical models regarding the chain conformation are introduced, and the quasi-two-parameter (QTP) theory for the conformation analysis is highlighted; (2) second, the research progress of the static conformation of comb-like polymers in dilute solution is discussed; (3) third, the research progress of the dynamic conformation in dilute solution is further discussed. The key issues, existing controversies and future research directions are also highlighted. We hope that this review can provide insightful information for the understanding of the conformational properties of comb-like polymers, open a new door for the regulation of conformational behavior in related applications, and promote related theoretical and experimental research in the community.

Marriage of Organic and Grubbs Catalysts for Tandem Synthesis of Bottlebrush Polyesters

Bottlebrush polymers (BBPs) have gained wide attention for their special characters, such as rigid main/side chains, stemming from the exceedingly high graft density. This study aims to provide a simple synthetic approach to BBPs with polyester side chains by merging ring-opening alternating copolymerization (ROAP) and ring-opening metathesis polymerization (ROMP). A simple phosphazene base (tBuP1) is employed for the ROAP of phthalic anhydride and epoxide, after which Grubbs third-generation catalyst (G3) is added to in situ switch on ROMP of the macromonomer, i.e., norbornenyl-ended alternating polyester. The compatibility of tBuP1 with G3 and well-controlled ROMP is evidenced by DOSY-NMR of mixed catalysts, characterization of BBPs, and side-chain degradation. The method can also be extended to BBPs with one-step synthesized block copolyesters side chains. These results highlight the strength of the non-nucleophilic organobase catalyst for convenient construction of complex (degradable) polymers with compositional diversity.

Water-soluble polyphosphonate-based bottlebrush copolymers via aqueous ring-opening metathesis polymerization

Ring-opening metathesis polymerization (ROMP) is a versatile method for synthesizing complex macromolecules from various functional monomers. In this work, we report the synthesis of water-soluble and degradable bottlebrush polymers, based on polyphosphoesters (PPEs) via ROMP. First, PPE-macromonomers were synthesized via organocatalytic anionic ring-opening polymerization of 2-ethyl-2-oxo-1,3,2-dioxaphospholane using N-(hydroxyethyl)-cis-5-norbornene-exo-2,3-dicarboximide as the initiator and 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) as the catalyst. The resulting norbornene-based macromonomers had degrees of polymerization (DPn) ranging from 25 to 243 and narrow molar mass dispersity (Đ ≤ 1.10). Subsequently, these macromonomers were used in ROMP with the Grubbs 3rd-generation bispyridyl complex (Ru-G3) to produce a library of well-defined bottlebrush polymers. The ROMP was carried out either in dioxane or in aqueous conditions, resulting in well-defined and water-soluble bottlebrush PPEs. Furthermore, a two-step protocol was employed to synthesize double hydrophilic diblock bottlebrush copolymers via ROMP in water at neutral pH-values. This general protocol enabled the direct combination of PPEs with ROMP to synthesize well-defined bottlebrush polymers and block copolymers in water. Degradation of the PPE side chains was proven resulting in low molar mass degradation products only. The biocompatible and biodegradable nature of PPEs makes this pathway promising for designing novel biomedical drug carriers or viscosity modifiers, as well as many other potential applications.

Applied machine learning as a driver for polymeric biomaterials design

Polymers are ubiquitous to almost every aspect of modern society and their use in medical products is similarly pervasive. Despite this, the diversity in commercial polymers used in medicine is stunningly low. Considerable time and resources have been extended over the years towards the development of new polymeric biomaterials which address unmet needs left by the current generation of medical-grade polymers. Machine learning (ML) presents an unprecedented opportunity in this field to bypass the need for trial-and-error synthesis, thus reducing the time and resources invested into new discoveries critical for advancing medical treatments. Current efforts pioneering applied ML in polymer design have employed combinatorial and high throughput experimental design to address data availability concerns. However, the lack of available and standardized characterization of parameters relevant to medicine, including degradation time and biocompatibility, represents a nearly insurmountable obstacle to ML-aided design of biomaterials. Herein, we identify a gap at the intersection of applied ML and biomedical polymer design, highlight current works at this junction more broadly and provide an outlook on challenges and future directions.

Degradable Bottlebrush Polypeptides and the Impact of their Architecture on Cell Uptake, Pharmacokinetics, and Biodistribution In Vivo

Bottlebrush polymers are highly promising as unimolecular nanomedicines due to their unique control over the critical parameters of size, shape and chemical function. However, since they are prepared from biopersistent carbon backbones, most known bottlebrush polymers are non-degradable and thus unsuitable for systemic therapeutic administration. Herein, we report the design and synthesis of novel poly(organo)phosphazene-g-poly(α-glutamate) (PPz-g-PGA) bottlebrush polymers with exceptional control over their structure and molecular dimensions (Dh ≈ 15-50 nm). These single macromolecules show outstanding aqueous solubility, ultra-high multivalency and biodegradability, making them ideal as nanomedicines. While well-established in polymer therapeutics, it has hitherto not been possible to prepare defined single macromolecules of PGA in these nanosized dimensions. A direct correlation was observed between the macromolecular dimensions of the bottlebrush polymers and their intracellular uptake in CT26 colon cancer cells. Furthermore, the bottlebrush macromolecular structure visibly enhanced the pharmacokinetics by reducing renal clearance and extending plasma half-lives. Real-time analysis of the biodistribution dynamics showed architecture-driven organ distribution and enhanced tumor accumulation. This work, therefore, introduces a robust, controlled synthesis route to bottlebrush polypeptides, overcoming limitations of current polymer-based nanomedicines and, in doing so, offers valuable insights into the influence of architecture on the in vivo performance of nanomedicines.

Self-Aggregation in Aqueous Media of Amphiphilic Diblock and Random Block Copolymers Composed of Monomers with Long Side Chains

Amphiphilic diblock copolymers and hydrophobically modified random block copolymers can self-assemble into different structures in a selective solvent. The formed structures depend on the copolymer properties, such as the ratio between the hydrophilic and the hydrophobic segments and their nature. In this work, we characterize by cryogenic transmission electron microscopy (cryo-TEM) and dynamic light scattering (DLS) the amphiphilic copolymers poly(2-dimethylamino ethyl methacrylate)-b-poly(lauryl methacrylate) (PDMAEMA-b-PLMA) and their quaternized derivatives QPDMAEMA-b-PLMA at different ratios between the hydrophilic and the hydrophobic segments. We present the various structures formed by these copolymers, including spherical and cylindrical micelles, as well as unilamellar and multilamellar vesicles. We also examined by these methods the random diblock copolymers poly(2-(dimethylamino) ethyl methacrylate)-b-poly(oligo(ethylene glycol) methyl ether methacrylate) (P(DMAEMA-co-Q_6/12DMAEMA)-b-POEGMA), which are partially hydrophobically modified by iodohexane (Q₆) or iodododecane (Q₁₂). The polymers with a small POEGMA block did not form any specific nanostructure, while a polymer with a larger POEGMA block formed spherical and cylindrical micelles. This nanostructural characterization could lead to the efficient design and use of these polymers as carriers of hydrophobic or hydrophilic compounds for biomedical applications.

Hydrogen Bonding Principle-Based Molecular Design of a Polymer Excipient and Impacts on Hydrophobic Drug Properties: Molecular Simulation and Experiment

Although some commercial excipients for improving the solubility of highly crystalline drugs are widely used, they still cannot cover all types of hydrophobic drugs. In this regard, with phenytoin as the target drug, related molecular structures of polymer excipients were designed. The optimal repeating units of NiPAm and HEAm were screened out through quantum mechanical simulation and Monte Carlo simulation methods, and the copolymerization ratio was also determined. Using molecular dynamics simulation technology, it was confirmed that the dispersibility and intermolecular hydrogen bonds of phenytoin in the designed copolymer were better than those in the commercial PVP materials. At the same time, the designed copolymers and solid dispersions were also prepared during the experiment, and the improvement of their solubility was confirmed, which is in accordance with the simulation predictions. The new ideas and simulation technology may be used for drug modification and development.

Structural Engineering of Star Block Biodegradable Polymer Unimolecular Micelles for Drug Delivery in Cancer Cells

The present investigation reports the structural engineering of biodegradable star block polycaprolactone (PCL) to tailor-make aggregated micelles and unimolecular micelles to study their effect on drug delivery aspects in cancer cell lines. Fully PCL-based star block copolymers were designed by varying the arm numbers from two to eight while keeping the arm length constant throughout. Multifunctional initiators were exploited for stepwise solvent-free melt ring-opening polymerization of ε-caprolactone and γ-substituted caprolactone to construct star block copolymers having a PCL hydrophobic core and a carboxylic PCL hydrophilic shell, respectively. A higher arm number and a higher degree of branching in star polymers facilitated the formation of unimolecular micelles as opposed to the formation of conventional multimicellar aggregates in lower arm analogues. The dense core of the unimolecular micelles enabled them to load high amounts of the anticancer drug doxorubicin (DOX, ∼12-15%) compared to the aggregated micelles (∼3-4%). The star unimolecular micelle completely degraded leading to 90% release of the loaded drug upon treatment with the lysosomal esterase enzyme in vitro. The anticancer efficacies of these DOX-loaded unimolecular micelles were tested in a breast cancer cell line (MCF-7), and their IC₅₀ values were found to be much lower compared to those of aggregated micelles. Time-dependent cellular uptake studies by confocal microscopy revealed that unimolecular micelles were readily taken up by the cells, and enhancement of the drug concentration was observed at the intracellular level up to 36 h. The present work opens new synthetic strategies for building a next-generation biodegradable unimolecular micellar nanoplatform for drug delivery in cancer research.

Hydrophilic Surface Modification of Cationic Unimolecular Bottlebrush Vectors Moderate pDNA and RNP Bottleplex Stability and Delivery Efficacy

A cationic unimolecular bottlebrush polymer with chemically modified end-groups was synthesized to understand the impact of hydrophilicity on colloidal stability, nucleic acid delivery performance, and toxicity. The bottlebrush polymer template was synthesized using grafting-through techniques and was therefore composed of a polynorbornene backbone with poly(2-(dimethylamino)ethyl methacrylate) side chains with dodecyl trithiocarbonate end-groups. Postpolymerization modification was performed to fully remove the end-groups or install hydroxy and methoxy poly(ethylene glycol) functional groups on the bottlebrush exterior. The bottlebrush family was preformulated with biological payloads of pDNA and CRISPR-Cas9 RNP in both water and PBS to understand binding, aggregation kinetics, cytotoxicity, and delivery efficacy. Increasing end-group hydrophilicity and preformulation of bottleplexes in PBS increased colloidal stability and cellular viability; however, this did not always result in increased transfection efficiency. The bottlebrush family exemplifies how formulation conditions, polymer loading, and end-group functionality of bottlebrushes can be tuned to balance expression with cytotoxicity ratios and result in enhanced overall performance.

Mesoscale Modeling of Agglomeration of Molecular Bottlebrushes: Focus on Conformations and Clustering Criteria

Using dissipative particle dynamics, we characterize dynamics of aggregation of molecular bottlebrushes in solvents of various qualities by tracking the number of clusters, the size of the largest cluster, and an average aggregation number. We focus on a low volume fraction of bottlebrushes in a range of solvents and probe three different cutoff criteria to identify bottlebrushes belonging to the same cluster. We demonstrate that the cutoff criteria which depend on both the coordination number and the length of the side chain allows one to correlate the agglomeration status with the structural characteristics of bottlebrushes in solvents of various qualities. We characterize conformational changes of the bottlebrush within the agglomerates with respect to those of an isolated bottlebrush in the same solvents. The characterization of bottlebrush conformations within the agglomerates is an important step in understanding the relationship between the bottlebrush architecture and material properties. An analysis of three distinct cutoff criteria to identify bottlebrushes belonging to the same cluster introduces a framework to identify both short-lived transient and long-lived agglomerates; the same approach could be further extended to characterize agglomerates of various macromolecules with complex architectures beyond the specific bottlebrush architecture considered herein.

Tuning the Hydrophilic-Hydrophobic Balance of Molecular Polymer Bottlebrushes Enhances their Tumor Homing Properties

Nanoparticle (NP)-based drug delivery systems are promising in anticancer therapy, capable of delivering cargo with superior selectivity and achieving enhanced tumor accumulation compared to small-molecule therapeutics. As more efforts are being devoted to NP development, molecular polymer bottlebrushes (MPBs) have gained attention as a potential drug delivery vehicle. To date, the influence of various MPB parameters such as size, shape, and surface charge in determining tumor penetrability have been systematically probed. However, the role of amphiphilicity, specifically the hydrophilic-hydrophobic balance, remains unexplored. In this study, a series of MPBs are employed with varied hydrophobicity levels to reveal a dependence between MPB composition, cell association, and tumor homing. The data indicates that increasing levels of hydrophobicity in MPBs (to a certain level) demonstrate only marginal effects in vitro but reveals enhanced tumor homing in a mouse model of ovarian cancer in vivo, where more hydrophilic MPBs exhibit low tissue deposition and low tumor homing. In contrast, more hydrophobic MPBs show significant tumor accumulation and homing due to their engineered hydrophobicity.

Synthesis and Micellization of Bottlebrush Poloxamers

Bottlebrush polymers are characterized by an expansive parameter space, including graft length and spacing along the backbone, and these features impact various structural and physical properties such as molecular diffusion and bulk viscosity. In this work, we report a synthetic strategy for making grafted block polymers with poly(propylene oxide) and poly(ethylene oxide) side chains, bottlebrush analogues of poloxamers. Combined anionic and sequential ring-opening metathesis polymerization yielded low dispersity polymers, at full conversion of the macromonomers, with control over graft length, graft end-groups, and overall molecular weight. A set of bottlebrush poloxamers (BBPs), with identical graft lengths and composition, was synthesized over a range of molecular weights. Dynamic light scattering and transmission electron microscopy were used to characterize micelle formation in aqueous buffer. The critical micelle concentration scales exponentially with overall molecular weight for both linear and bottlebrush poloxamers; however, the bottlebrush architecture shifts micelle formation to a much higher concentration at a comparable molecular weight. Consequently, BBPs can exist in solution as unimers at significantly higher molecular weights and concentrations than the linear analogues.

Molecular bases for temperature sensitivity in supramolecular assemblies and their applications as thermoresponsive soft materials

Thermoresponsive supramolecular assemblies have been extensively explored in diverse formats, from injectable hydrogels to nanoscale carriers, for a variety of applications including drug delivery, tissue engineering and thermo-controlled catalysis. Understanding the molecular bases behind thermal sensitivity of materials is fundamentally important for the rational design of assemblies with optimal combination of properties and predictable tunability for specific applications. In this review, we summarize the recent advances in this area with a specific focus on the parameters and factors that influence thermoresponsive properties of soft materials. We summarize and analyze the effects of structures and architectures of molecules, hydrophilic and lipophilic balance, concentration, components and external additives upon the thermoresponsiveness of the corresponding molecular assemblies.

Reversible Addition-Fragmentation Chain Transfer Step-Growth Polymerization with Commercially Available Inexpensive Bis-Maleimides

Here, commercially available N-aromatic substituted bismaleimides were used in RAFT step-growth polymerization for the first time. In our initial report (J. Am. Chem. Soc. 2021, 143 (39), 15918-15923), maleimide precursors...

Synthesis of bottlebrush polymers based on poly(N-sulfonyl aziridine) macromonomers

We synthesized bottlebrush polymers with polyaziridine brushes and a polynorbornene backbone by a grafting-through approach. The polyaziridine macromonomer aggregates in solution, but these aggregates disperse over the course of the polymerization.

From macromonomers to bottlebrush copolymers with sequence control: synthesis, properties, and applications

Bottlebrush polymers (BBPs) are a type of comb-like macromolecules with densely grafted polymeric sidechains attached to the polymer backbones, and many intriguing properties and applications have been demonstrated due to...

Molecular bottlebrush with pH-responsive cleavable bonds as a unimolecular vehicle for anticancer drug delivery

Drug delivery systems with targeted and smart properties have emerged as an efficient strategy to overcome the challenges of cancer chemotherapy such as toxic side effects and the development of multidrug resistance. In this study, a biocompatible bottlebrush polymer poly((3-(2-bromo-2-methylpropionate)propyldimethylsilyloxy)ethyl methacrylate)-graft-poly(2-methacryloyloxyethyl phosphorylcholine) P(BIBS-EMA)-g-PMPC with pH-responsive silanol cleavable bond was designed and developed for delivery of doxorubicin. A549 cell line of human lung carcinoma was tested. The synthesized bottlebrush polymer was analyzed and characterized via Fourier transform infrared spectroscopy, FTIR, nuclear magnetic resonance spectroscopy, ¹H NMR, gel permeation chromatography, GPC, dynamic laser light scattering, DLS, and static laser light scattering, SLS, techniques. The cleavage process was also precisely studied to confirm the pH-responsiveness of such bottlebrush polymers. In vitro loading and release studies of doxorubicin as a model drug were examined and the results showed a pH-dependent release manner with a twice higher release rate under cancerous tissue conditions compared to standard physiological conditions. MTT cytotoxicity assay was also performed to prove the biocompatibility of the designed polymeric platform on healthy human cells. Due to the presence of bio-inspired poly(2-methacryloyloxyethyl phosphorylcholine) side chains in the prepared bottlebrush polymer, the formed polymer-drug complex could also exhibit effective internalization into tumor cells. These facts further support the potential use of this carrier in drug delivery applications and for further in vivo studies.

Cationic Bottlebrush Polymers Outperform Linear Polycation Analogues for pDNA Delivery and Gene Expression

Cationic polymer vehicles have emerged as promising platforms for nucleic acid delivery because of their scalability, biocompatibility, and chemical versatility. Advancements in synthetic polymer chemistry allow us to precisely tune chemical functionality with various macromolecular architectures to increase the efficacy of nonviral-based gene delivery. Herein, we demonstrate the first cationic bottlebrush polymer-mediated pDNA delivery by comparing unimolecular, synthetically defined bottlebrush polymers to their linear building blocks. We successfully synthesized poly(2-(dimethylamino)ethyl methacrylate) (pDMAEMA) bottlebrushes through ring-opening metathesis polymerization to afford four bottlebrush polymers with systematic increases in backbone degree of polymerization (N_bb = 13, 20, 26, and 37), while keeping the side-chain degree of polymerization constant (N_sc = 57). Physical and chemical properties were characterized, and subsequently, the toxicity and delivery efficiency of pDNA into HEK293 cells were evaluated. The bottlebrush-pDNA complex (bottleplex) with the highest N_bb, BB_37, displayed up to a 60-fold increase in %EGFP+ cells in comparison to linear macromonomer. Additionally, we observed a trend of increasing EGFP expression with increasing polymer molecular weight. Bottleplexes and polyplexes both displayed high pDNA internalization as measured via payload enumeration per cell; however, quantitative confocal analysis revealed that bottlebrushes were able to shuttle pDNA into and around the nucleus more successfully than pDNA delivered via linear analogues. Overall, a canonical cationic monomer, such as DMAEMA, synthesized in the form of cationic bottlebrush polymers proved to be far more efficient in functional pDNA delivery and expression than linear pDMAEMA. This work underscores the importance of architectural modifications and the potential of bottlebrushes to serve as effective biomacromolecule delivery vehicles.