Quaternized Silk Nanofibrils for Electricity Generation from Moisture and Ion Rectification

Moisture-based green energy harvesting over 600 hours via photocatalysis-enhanced hydrovoltaic effect

Harvesting the energy from the interaction between hygroscopic materials and atmospheric water can generate green and clean energy. However, the ion diffusion process of moisture-induced dissociation leads to the disappearance of the ion concentration gradient gradually, and there is still a lack of moisture-based power generation devices with truly continuous operation, especially the duration of the current output still needs to be extended. Here, we propose a design for reconstructing the ion concentration gradient by coupling photocatalytic hydrogen evolution reaction with hydrovoltaic effect, to report a moisture-enabled electric generator (MEG) with continuous current output. We show that the introduction of the photocatalytic layer not only absorbs light energy to greatly increase the power generation of the MEG (500% power density enhancement), but more importantly, the photocatalytic hydrogen evolution process consumes the pre-stacked ions to restore the ion concentration gradient, allowing the MEG to continuously output current for more than 600 hours, which is 1 to 2 orders of magnitude higher than the great majority of existed MEGs in terms of the current output duration.

Silk Nanofibers/Carbon Nanotube Conductive Aerogel

Natural silk nanofibers (SNF) are attractive conductive substrates due to their high aspect ratio, outstanding mechanical strength, excellent biocompatibility, and controllable degradability. However, the inherently non-conductivity severely restricts the potential sensor application of SNF-based aerogels. In this work, the conductive nanofibrous aerogels with low-density achieved through freeze-drying by dispersing carbon nanotubes (CNT) into SNF suspension. The addition of CNT significantly increases the conductivity with improved mechanical properties of composite aerogels. SEM results reveal that the distinct hierarchical structure comprising micropores and nanofibrous networks within the pores is formed when CNT content reached 30%. Furthermore, increased cell viability suggested the excellent biocompatibility of SNF-CNT-based conductive aerogel for tissue-engineering applications. Subsequently, the elastic water-borne polyurethane (WPU) is incorporated to SNF-CNT system to construct aerogel with good sensing properties. The introduction of WPU demonstrates enhanced compressive performances and an exceptionally high elastic recovery ratio of 99.8%, thereby exhibiting a stable and lossless strain-sensing signal output at 5% strain. This study provides a feasible choice and strategy for exploring the potential application of SNF in functional aerogels.

Recent Advances in Fibrous Materials for Hydroelectricity Generation

Depleting fossil energy sources and conventional polluting power generation pose a threat to sustainable development. Hydroelectricity generation from ubiquitous and spontaneous phase transitions between liquid and gaseous water has been considered a promising strategy for mitigating the energy crisis. Fibrous materials with unique flexibility, processability, multifunctionality, and practicability have been widely applied for fibrous materials-based hydroelectricity generation (FHG). In this review, the power generation mechanisms, design principles, and electricity enhancement factors of FHG are first introduced. Then, the fabrication strategies and characteristics of varied constructions including 1D fiber, 1D yarn, 2D fabric, 2D membrane, 3D fibrous framework, and 3D fibrous gel are demonstrated. Afterward, the advanced functions of FHG during water harvesting, proton dissociation, ion separation, and charge accumulation processes are analyzed in detail. Moreover, the potential applications including power supply, energy storage, electrical sensor, and information expression are also discussed. Finally, some existing challenges are considered and prospects for future development are sincerely proposed.

Natural Deep Eutectic Solvent-Assisted Construction of Silk Nanofibrils/Boron Nitride Nanosheets Membranes with Enhanced Heat-Dissipating Efficiency

Natural polymer-derived nanofibrils have gained significant interest in diverse fields. However, production of bio-nanofibrils with the hierarchical structures such as fibrillar structures and crystalline features remains a great challenge. Herein, an all-natural strategy for simple, green, and scalable top-down exfoliation silk nanofibrils (SNFs) in novel renewable deep eutectic solvent (DES) composed by amino acids and D-sorbitol is innovatively developed. The DES-exfoliated SNFs with a controllable fibrillar structures and intact crystalline features, novelty preserving the hierarchical structure of natural silk fibers. Owing to the amphiphilic nature, the DES-exfoliated SNFs show excellent capacity of assisting the exfoliation of several 2D-layered materials, i.e., h-BN, MoS2, and WS2. More importantly, the SNFs-assisted dispersion of BNNSs with a concentration of 59.3% can be employed to construct SNFs/BNNSs nanocomposite membranes with excellent mechanical properties (tensile strength of 416.7 MPa, tensile modulus of 3.86 GPa and toughness of 1295.4 KJ·m-3) and thermal conductivity (in-plane thermal conductivity coefficient of 3.84 W·m-1·K-1), enabling it to possess superior cooling efficiency compared with the commercial silicone pad.

High-Performance Flexible Graphene Oxide-Based Moisture-Enabled Nanogenerator via Multilayer Heterojunction Engineering and Power Management System

Recently, there has been a surge of interest in nanogenerators within the scientific community because their immense potential for extracting energy from the surrounding environment. A promising approach involves utilizing ambient moisture as an energy source for portable devices. In this study, moisture-enabled nanogenerators (MENGs) are devised by integrating heterojunctions of graphene oxide (GO) and reduced graphene oxide (rGO). Benefiting from the unique structure, a larger ion concentration gradient is achieved as well as a lower resistance, which leads to enhanced electricity generation. The resulting MENG generates a desirable open-circuit voltage of 0.76 V and a short-circuit current density of 73 µA cm-2 with a maximum power density of 15.8 µW cm-2. Notably, the designed device exhibits a high voltage retention of more than 90% after 3000 bending cycles, suggesting a high potential for flexible applications. Moreover, a large-scale integrated MENG array is developed by incorporating flexible printed circuit technology and connecting it to a power management system. This integrated system can provide ample energy to operate an electronic ink display and drive a heart rate sensor for health monitoring. The outcomes of this research present a novel framework for advancing next-generation self-powered flexible devices, thereby demonstrating significant promise for future wearable electronics.

Biodegradable quaternized silk fibroin sponge with highly uniform pore structure for traumatic hemostasis and anti-infection

Developing a biodegradable sponge with rapid shape recovery and potent antibacterial and coagulation properties for traumatic hemostasis and anti-infection remains challenging. Herein, we fabricated quaternized silk fibroin (SF) sponges by freeze-drying under a constant cooling rate and modification with quaternary ammonium groups. We found the constant cooling rate enabled the sponges with a highly uniform pore structure, which provided excellent self-elasticity and shape recovery. Decoration with quaternary ammonium groups enhanced blood cells adhesion, aggregation, and activation, as well as resistance to infections from Staphylococcus aureus and Escherichia coli. The SF sponge had superior hemostatic capacity to gauze and commercial gelatin sponge in different hemorrhage models. The SF sponge exhibited favorable biodegradability and biocompatibility. Moreover, The SF sponge also promoted host cell infiltration, capillary formation, and tissue ingrowth, suggesting its potential for guiding tissue regeneration. The developed SF sponge holds great application prospects for traumatic hemostasis, anti-infection, and guiding tissue regeneration.

Hierarchical Bilayer Polyelectrolyte Ion Paper Conductor for Moisture-Induced Power Generation

Harvesting energy from air water (atmospheric moisture) promises a sustainable self-powered system without any restrictions from specific environmental requirements (e.g., solar cells, hydroelectric, or thermoelectric devices). However, the present moisture-induced power devices traditionally generate intermittent or bursts of energy, especially for much lower current outputs (generally keeping at nA or μA levels) from the ambient environment, typically suffering from inferior ionic conductivity and poor hierarchical structure design for manipulating sustained air water and ion-charge transport. Here, we demonstrate a universal strategy to design a high-performance bilayer polyelectrolyte ion paper conductor for generating continuous electric power from ambient humidity. The generator can produce a continuous voltage of up to 0.74 V and also an exceptional current of 5.63 mA across a single 1.0 mm-thick ion paper conductor. We discover that the sandwiched LiCl-nanocellulose-engineered paper promises an ion-transport junction between the negatively and positively charged bilayer polyelectrolytes for application in MEGs with both high voltage and high current outputs. Moreover, we demonstrated the universality of this bilayer sandwich nanocellulose-salt engineering strategy with other anions and cations, exhibiting similar power generation ability, indicating that it could be the next generation of sustainable MEGs with low cost, easier operation, and high performance.

In-situ observation of silk nanofibril assembly via graphene plasmonic infrared sensor

Silk nanofibrils (SNFs), the fundamental building blocks of silk fibers, endow them with exceptional properties. However, the intricate mechanism governing SNF assembly, a process involving both protein conformational transitions and protein molecule conjunctions, remains elusive. This lack of understanding has hindered the development of artificial silk spinning techniques. In this study, we address this challenge by employing a graphene plasmonic infrared sensor in conjunction with multi-scale molecular dynamics (MD). This unique approach allows us to probe the secondary structure of nanoscale assembly intermediates (0.8-6.2 nm) and their morphological evolution. It also provides insights into the dynamics of silk fibroin (SF) over extended molecular timeframes. Our novel findings reveal that amorphous SFs undergo a conformational transition towards β-sheet-rich oligomers on graphene. These oligomers then connect to evolve into SNFs. These insights provide a comprehensive picture of SNF assembly, paving the way for advancements in biomimetic silk spinning.

Versatile Deprotonation-Induced Exfoliation and Functionalization of Biological Nanofibrils for Actuation and Fluorescence

Biological nanofibrils not only are characteristic of many species of biomasses but also serve as a promising type of sustainable nanomaterials for various applications. However, their production has long relied on an invasive and energy-consuming mechanical shear. A noninvasive and versatile approach remains challenging to exfoliate different types of biomasses into nanofibrils. In this study, we showed a versatile and nonaggressive intercalative deprotonation agent of organic base, which could efficiently deprotonate various biomasses for energy-saving exfoliation and functionalization, including cellulose, chitin, and silk. Both carboxylic nanofibrils and nanofibrils with pristine chemical structures could be produced in high yields through manual shaking or sonication. By further grafting photoresponsive groups via transesterification, intelligent NFs were generated featuring ultraviolet-responsive fluorescence and hydrophilicity. These responsive fluorescence and actuation behaviors promised their potential as green encryption and anticounterfeiting nanomaterials.

Bacterial cellulose/multi-walled carbon nanotube composite films for moist-electric energy harvesting

Generation of renewable and clean electricity energy from ubiquitous moisture for the power supply of portable electronic devices has become one of the most promising energy collection methods. However, the modest electrical output and transient power supply characteristics of existing moist-electric generator (MEG) severely limit its commercial application, leading to an urgent demand of developing a MEG with high electrical output and continuous power generation capacity. In this work, it is demonstrated that a flexible bacterial cellulose (BC)/Multi-walled carbon nanotube (MWCNT) double-layer (BM-dl) film prepared by vacuum filtration can maintain the moisture concentration difference in the film MEG. Unlike previous studies on cellulose based MEG, BM-dl film has a heterogeneous structure, resulting in a maximum output power density of 0.163 μW/cm2, an extreme voltage of 0.84 V, and current of 2.21 μA at RH = 90 %. BM-dl MEG can generate a voltage of 0.55 V continuously for 45 h in a natural environment (RH = 63-77 %, T = 26-27 °C), which is in a leading level among existing reported cellulose-based MEGs. In summary, this study provides new ideas for innovative design of MEG, which is highly competitive in terms of energy supply for the Internet of Things and wearable devices.

Study on the Rectification of Ionic Diode Based on Cross-Linked Nanocellulose Bipolar Membranes

Nanocellulose-based membranes have attracted intense attention in bioelectronic devices due to their low cost, flexibility, biocompatibility, degradability, and sustainability. Herein, we demonstrate a flexible ionic diode using a cross-linked bipolar membrane fabricated from positively and negatively charged cellulose nanofibrils (CNFs). The rectified current originates from the asymmetric charge distribution, which can selectively determine the direction of ion transport inside the bipolar membrane. The mechanism of rectification was demonstrated by electrochemical impedance spectroscopy with voltage biases. The rectifying behavior of this kind of ionic diode was studied by using linear sweep voltammetry to obtain current-voltage characteristics and the time dependence of the current. In addition, the performance of cross-linked CNF diodes was investigated while changing parameters such as the thickness of the bipolar membranes, the scanning voltage range, and the scanning rate. A good long-term stability due to the high density cross-linking of the diode was shown in both current-voltage characteristics and the time dependence of current.

Moisture-Enabled Electricity from Hygroscopic Materials: A New Type of Clean Energy

Water utilization is accompanied with the development of human beings, whereas gaseous moisture is usually regarded as an underexploited resource. The advances of highly efficient hygroscopic materials endow atmospheric water harvesting as an intriguing solution to convert moisture into clean water. The discovery of hygroelectricity, which refers to the charge buildup at a material surface dependent on humidity, and the following moisture-enabled electric generation (MEG) realizes energy conversion and directly outputs electricity. Much progress has been made since then to optimize MEG performance, pushing forward the applications of MEG into a practical level. Herein, the evolvement and development of MEG are systematically summarized in a chronological order. The optimization strategies of MEG are discussed and comprehensively evaluated. Then, the latest applications of MEG are presented, including high-performance powering units and self-powered devices. In the end, a perspective on the future development of MEG is given for inspiring more researchers into this promising area.

Engineering biomimetic scaffolds by combining silk protein nanofibrils and hyaluronic acid

Nanofibrous scaffolds mimicking important features of the native extracellular matrix (ECM) provide a promising strategy for tissue regeneration. However, 3D scaffolds mimicking natural protein nanofibers and bioactive glycosaminoglycans remain poorly developed. In this study, a biomimetic nanofibrous scaffold composed of natural silk protein nanofibers and glycosaminoglycan hyaluronic acid (HA) was developed. HA functionalization significantly improved the hydrophilicity and bioactivity of silk nanofibers (SNFs). SNFs can be assembled into nanofibrous aerogel scaffolds with low density and desirable shapes on a large scale. More importantly, with the assistance of HA, the silk nanofibrous aerogel scaffolds with ultra-high porosity, natural bioactivity, and structural stability in aqueous environment can be fabricated. In the protease/hyaluronidase solution, the SNF scaffolds with 10.0 % HA can maintain their monolithic shape for >3 weeks. The silk nanofibrous scaffolds not only imitate the composition of ECM but also mimic the hierarchical structure of ECM, providing a favorable microenvironment for cell adhesion and proliferation. These results indicate that this structurally and functionally biomimetic system is a promising tissue engineering scaffold.

Microbial biofilm-based hydrovoltaic technology

Hydrovoltaic electricity generation (HEG) utilizes the latent environmental heat stored in water, and subsequently harvests the electrical energy. However, sustainable HEG has remained extremely challenging due either to complex fabrication and high cost, or to restricted environmental compatibility and renewability. Electroactive microorganisms are environmentally abundant and viable in performing directional electron transport to produce currents. These distinctive features have inspired microbial HEG systems that can convert environmental energy into hygroelectricity upon water circulation from raindrops, waves, and water moisture, and has recently succeeded as proof of concept for becoming a cutting-edge biotechnology. In this review, recent advances in microbial biofilm-based hydrovoltaic technology are highlighted to better understand a promising method of electricity generation from environmental energy with the aim of practical applications.

Natural silk nanofibers as building blocks for biomimetic aerogel scaffolds

Protein nanofibers offer great promise for tissue engineering scaffolds owing to biomimetic architecture and exceptional biocompatibility. Natural silk nanofibrils (SNFs) are promising but unexplored protein nanofibers for biomedical applications. In this study, the SNF-assembled aerogel scaffolds with ECM-mimicking architecture and ultra-high porosity are developed based on a polysaccharides-assisted strategy. The SNFs exfoliated from silkworm silks can be utilized as building blocks to construct 3D nanofibrous scaffolds with tunable densities and desirable shapes on a large scale. We demonstrate that the natural polysaccharides can regulate SNF assembly through multiple binding modes, endowing the scaffolds with structural stability in water and tunable mechanical properties. As a proof of concept, the biocompatibility and biofunctionality of the chitosan-assembled SNF aerogels were investigated. The nanofibrous aerogels have excellent biocompatibility, and their biomimetic structure, ultra-high porosity, and large specific surface area endow the scaffolds with enhanced cell viability to mesenchymal stem cells. The nanofibrous aerogels were further functionalized by SNF-mediated biomineralization, demonstrating their potential as a bone-mimicking scaffold. Our results show the potential of natural nanostructured silks in the field of biomaterials and provide a feasible strategy to construct protein nanofiber scaffolds.

Superelastic and multifunctional fibroin aerogels from multiscale silk micro-nanofibrils exfoliated via deep eutectic solvent

Superelastic silk fibroin (SF)-based aerogels can be used as multifunctional substrates, exhibiting a promising prospect in air filtration, thermal insulation, and biomedical materials. However, fabrication of the superelastic pure SF aerogels without adding synthetic polymers remains challenging. Here, the SF micro-nano fibrils (SMNFs) that preserved mesostructures are extracted from SF fibers as building blocks of aerogels by a controllable deep eutectic solvent liquid exfoliation technique. SMNFs can assemble into multiscale fibril networks during the freeze-inducing process, resulting in all-natural SMNF aerogels (SMNFAs) with hierarchical cellular architectures after lyophilization. Benefiting from these structural features, the SMNFAs demonstrate desirable properties including ultra-low density (as low as 4.71 mg/cm³) and superelasticity (over 85 % stress retention after 100 compression cycles at 60 % strain). Furthermore, the potential applications of superelastic SMNFAs in air purification and thermal insulation are investigated to exhibit their functionality, mechanical elasticity, and structural stability. This work provides a reliable approach for the fabrication of highly elastic SF aerogels and endows application prospects in air purification and thermal insulation opportunities.

Recent Development of Moisture-Enabled-Electric Nanogenerators

Power generation by converting energy from the ambient environment has been considered a promising strategy for developing decentralized electrification systems to complement the electricity supply for daily use. Wet gases, such as water evaporation or moisture in the atmosphere, can be utilized as a tremendous source of electricity by emerging power generation devices, that is, moisture-enabled-electric nanogenerators (MEENGs). As a promising technology, MEENGs provided a novel manner to generate electricity by harvesting energy from moisture, originating from the interactions between water molecules and hydrophilic functional groups. Though the remarkable progress of MEENGs has been achieved, a systematic review in this specific area is urgently needed to summarize previous works and provide sharp points to further develop low-cost and high-performing MEENGs through overcoming current limitations. Herein, the working mechanisms of MEENGs reported so far are comprehensively compared. Subsequently, a systematic summary of the materials selection and fabrication methods for currently reported MEENG construction is presented. Then, the improvement strategies and development directions of MEENG are provided. At last, the demonstrations of the applications assembled with MEENGs are extracted. This work aims to pave the way for the further MEENGs to break through the performance limitations and promote the popularization of future micron electronic self-powered equipment.

Biomimetic Natural Silk Nanofibrous Microspheres for Multifunctional Biomedical Applications

Silk nanofibrils (SNFs) extracted from natural silkworm silk represent a class of high-potential protein nanofiber material with unexplored biomedical applications. In this study, a SNF-assembled microsphere with extracellular matrix (ECM)-mimicking architecture and high specific surface area was developed. The SNFs were exfoliated from silkworm silks through an all-aqueous process and used as the building blocks for constructing the microspheres. Inspired by the structure and bioactive composition of ECM, hyaluronic acid (HA) was used as a bio-glue to regulate SNF assembly. With the assistance of HA, the SNF microspheres with stable fluffy nanofibrous structures were synthesized through electrospray. The biomimetic structure and nature derived composition endow the microspheres with excellent biocompatibility and enhanced osteogenic differentiation-inducing ability to mesenchymal stem cells. As proof of versatility, the SNF microspheres were further functionalized with other molecules and nanomaterials. Taking the advantages of the excellent blood compatibility and modifiability from the molecular level to the nanoscale of SNF microspheres, we demonstrated their versatile applications in protease detection and blood purification. On the basis of these results, we foresee that this natural silk-based nanofibrous microsphere may serve as a superior biomedical material for tissue engineering, early disease diagnosis, and therapeutic devices.

All-Biobased Hydrovoltaic-Photovoltaic Electricity Generators for All-Weather Energy Harvesting

Hygroelectricity generators (HEGs) utilize the latent heat stored in environmental moisture for electricity generation, but nevertheless are showing relatively low power densities due to their weak energy harvesting capacities. Inspired by epiphytes that absorb ambient moisture and concurrently capture sunlight for dynamic photosynthesis, we propose herein a scenario of all-biobased hydrovoltaic-photovoltaic electricity generators (HPEGs) that integrate photosystem II (PSII) with Geobacter sulfurreducens (G.s) for simultaneous energy harvesting from both moisture and sunlight. This proof of concept illustrates that the all-biobased HPEG generates steady hygroelectricity induced by moisture absorption and meanwhile creates a photovoltaic electric field which further strengthens electricity generation under sunlight. Under environmental conditions, the synergic hydrovoltaic-photovoltaic effect in HPEGs has resulted in a continuous output power with a high density of 1.24 W/m2, surpassing all HEGs reported hitherto. This work thus provides a feasible strategy for boosting electricity generation via simultaneous energy harvesting from ambient moisture and sunlight.

Mildly Peeling Off and Encapsulating Large MXene Nanosheets with Rigid Biologic Fibrils for Synchronization of Solar Evaporation and Energy Harvest

Efficient and nondestructive liquid exfoliation of MXene with large lateral size has drawn growing research interest due to its outstanding properties and diverse potential applications. The conventional sonication method, though enabling a high production yield of MXene nanosheets, broke them down into submicrometric sizes or even quantum dots, and thus sacrificed their size-dependent properties, chemical stability, and wide applications. Herein, rigid biological nanofibrils in combination of mild manual shake were found to be capable of peeling off MXene nanosheets by attaching on MXene surfaces and localizing the shear force. With comparison to sonication, this efficient and nondestructive exfoliation approach produced the MXene nanosheets with the lateral size up to 4-6 μm and a comparable yield of 64% within 2 h. The resultant MXene nanosheets were encapsulated with these biological fibrils, and thus enabled super colloidal and chemical stability. A steam generation efficiency of ∼86% and a high evaporation rate of 3.3 kg m^-2 h^-1 were achieved on their aerogels under 1-Sun irradiation at ∼25 °C. An evaporation rate of 0.5 kg m^-2 h^-1 still maintained even at the atmospheric temperature of -5 °C. More importantly, an electricity generation up to ∼350 mV also accompanied this solar evaporation under equivalent 5-Sun irradiation. Thus, this fibrous strategy not only provides an efficient and nondestructive exfoliation method of MXene, but also promises synchronization of solar-thermal evaporation and energy harvest.

A Hygroscopic Janus Heterojunction for Continuous Moisture-Triggered Electricity Generators

Moisture-triggered electricity generator (MEG) harvesting energy from the ubiquity of atmospheric moisture is one of the promising potential candidates for renewable power demand. However, MEG device performance is strongly dependent on the moisture concentration, which results in its large fluctuation of the electrical output. Here, a Janus heterojunction MEG device consisting of nanostructured silicon and hygroscopic polyelectrolyte incorporating hydrophilic carbon nanotube mesh is proposed to enable ambient moisture harvesting and continuous stable electrical output delivery. The nanostructured silicon with a large surface/volume ratio provides strong coupling interaction with water molecules for charge generation. A polyelectrolyte of polydiallyl dimethylammonium chloride (PDDA) can facilitate charge selective transporting and enhance the effectiveness of moisture-absorbing in an arid environment simultaneously. The conductive, porous, and hydrophilic carbon nanotube mesh allows water to be ripped through as well as the generated charges being collected timely. As such, any generated charge carriers in the Janus heterojunction can be efficiently swept toward their respective electrodes, because of the device asymmetric contact. A MEG device continuously delivers an open-circuit voltage of 1.0 V, short-circuit current density of 8.2 μA/cm², and output power density of 2.2 μW/cm² under an ambient environment (60% relative humidity, 25 °C), which is a record value over the previously reported values. Furthermore, the infrared thermal measurements also reveal that the moisture-triggered electricity generation power is likely ascribed to surrounding thermal energy collected by the MEG device. Our results provide an insightful rationale for the design of device structure and understanding of the working mechanism of MEG, which is of great importance to promote the efficient electricity conversion induced by moisture in the atmosphere.

Water evaporation-induced electricity with Geobacter sulfurreducens biofilms

Water evaporation-induced electricity generators (WEGs) have recently attracted extensive research attention as an emerging renewable energy-harvesting technology that harvests electricity directly from water evaporation. However, the low power output, limited available material, complicated fabrication process, and extremely high cost have restricted wide applications of this technology. Here, a facile and efficient WEG prototype based on Geobacter sulfurreducens biofilm was demonstrated. The device can generate continuous electric power with a maximum output power density of ~685.12 μW/cm², which is two orders of magnitude higher than that of previously reported analogous devices. The superior performance of the device is attributed to the intrinsic properties of the G. sulfurreducens biofilm, including its hydrophilicity, porous structure, conductivity, etc. This study not only presents the unprecedented evaporating potential effect of G. sulfurreducens biofilms but also paves the way for developing hydrovoltaic technology with biomaterials.

Toughening Wet-Spun Silk Fibers by Silk Nanofiber Templating

Regenerated silk fibers typically fall short of silkworm cocoon fibers in mechanical properties due to reduced fiber crystal structure and alignment. One approach to address this has been to employ inorganic materials as reinforcing agents. The present study avoids the need for synthetic additives, demonstrating the first use of exfoliated silk nanofibers to control silk solution crystallization, resulting in all-silk pseudocomposite fibers with remarkable mechanical properties. Incorporating only 0.06 wt. % silk nanofibers led to a ∼44% increase in tensile strength (over 600 MPa) and ∼33% increase in toughness (over 200 kJ/kg) compared with fibers without silk nanofibers. These remarkable properties can be attributed to nanofiber crystal seeding in conjunction with fiber draw. The crystallinity nearly doubled from ∼17% for fiber spun from pure silk solution to ∼30% for the silk nanofiber reinforced sample. The latter fiber also shows a high degree of crystal orientation with a Herman's orientation factor of 0.93, a value which approaches that of natural degummed B. mori silk cocoon fiber (0.96). This study provides a strong foundation to guide the development of simple, eco-friendly methods to spin regenerated silk with excellent properties and a hierarchical structure that mimics natural silk. This article is protected by copyright. All rights reserved.

Programmable Asymmetric Nanofluidic Photothermal Textile Umbrella for Concurrent Salt Management and In Situ Power Generation During Long-Time Solar Steam Generation

Although solar-driven seawater desalination affords a highly promising strategy for freshwater-electricity harvesting by employing abundant solar energy and ocean resources, the inevitable salt crystallization on the surface of evaporators causes a sharp decline in evaporation performance and the poor electricity output of most coupled inflexible evaporation-power generation devices limits the scalability and durability in long-time practical applications. Herein, we report a simple programmable nanofluidic photothermal textile umbrella by asymmetrically depositing MoS₂ nanosheets on cotton textiles, which allows for controllable gravity-assisted edge-preferential salt crystallization/harvesting via self-manipulated saline solution transportation in the wet umbrella and simultaneous drenching-induced electrokinetic voltage generation (0.535 V)/storage (charging a capacitor to 12.2 V) in over 120 h of the nonstop solar desalination process (with 7.5 wt % saline solution). Notably, the morphology and salt crystallization areas can be managed via the programmed umbrellas. Moreover, the asymmetric textile umbrellas possess admirable sewable features for large-scale integration to enhance the evaporation and voltage output efficiency. Importantly, this textile umbrella evaporator shows excellent output stability and durability even after 40 times of washing. This work may pave a scalable way to design programmable solar evaporators for sustainable seawater desalination with scalabilities of zero-waste discharge, valuable resource recovery, and energy harvesting.

Unidirectionally Driving Nanofluidic Transportation via an Asymmetric Textile Pump for Simultaneous Salt-Resistant Solar Desalination and Drenching-Induced Power Generation

Solar-driven seawater desalination provides a promising technology for sustainable water energy harvesting. Although tremendous efforts have been dedicated to developing efficient evaporators, the challenge of preventing salt accumulation while simultaneously realizing high-performance steam-electricity cogeneration remains to be addressed. In this work, inspired by the water and solute transportation in plants via the wicking mechanism, a one-way asymmetric nanofluidic photothermal evaporator fabricated by disproportionately depositing photothermal MXene nanosheets on a hydrophilic cotton textile is reported for simultaneous freshwater and power production. By unidirectionally driving dynamic saline transportation via this photothermal cotton textile pump, this evaporator not only enables self-operating salt rejection for stable steam generation but also affords continuous electric power generation induced by the formation of an asymmetric double electrode layer within MXene nanochannels under the drenching state. Specifically, the solar-driven evaporation rate and voltage generation reach 1.38 kg/m²/h (with a conversion efficiency of 83.1%) and 363 mV under 1 sun irradiation, respectively. Notably, this designed nanofluidic system suffers negligible performance depreciation after 30 h of operation and washing 15 times, which indicates its outstanding stability and reusability. This facile design of the asymmetric nanofluidic photothermal system may provide prospective opportunities for scaling up sustainable freshwater and electric power production.

Natural Silk Nanofibril Aerogels with Distinctive Filtration Capacity and Heat-Retention Performance

Nanofibrous aerogels have been extensively developed as multifunctional substrates in a wide range of fields. Natural silk nanofibrils (SNFs) are an appealing biopolymer due to their natural abundance, mechanical toughness, biodegradability, and excellent biocompatibility. However, fabricating 3D SNF materials with mechanical flexibility remains a challenge. Herein, SNF-based aerogels with controlled structures and well mechanical resilience were prepared. SNFs were extracted from silkworm silks by mechanical disintegration based on an all-aqueous system. The nanofibrils network and hierarchical cellular structure of the aerogels were tuned by the assembly of SNFs and foreign poly(vinyl alcohol) (PVA). The SNF aerogels exhibited an ultralow density (as low as 2.0 mg·cm^-3) and well mechanical properties with a structure allowing for large deformations. These SNF aerogels demonstrated a reversible compression and stress retention after 100 cycles of compression. Furthermore, the resulting aerogels were used for air filtration and showed efficient filtration performance with a high dust-holding capacity and low resistance. Moreover, an extremely low thermal conductivity of 0.028 W·(m·K)^-1 was achieved by the aerogel, showing its potential for use in heat-retention applications. This study provides a useful strategy for exploring the use of natural silks in 3D aerogels and offers options for developing filtration materials and ultralight heat-retention materials.

Pseudosolvent Intercalator of Chitin: Self-Exfoliating into Sub-1 nm Thick Nanofibrils for Multifunctional Chitinous Materials

Traditionally, energy-intensive and time-consuming postmechanical disintegration processes are inevitable in extracting biopolymer nanofibrils from natural materials and thereby hinder their practical applications. Herein, a new, convenient, scalable, and energy-efficient method for exfoliating nanofibrils (ChNFs) from various chitin sources via pseudosolvent-assisted intercalation process is proposed. These self-exfoliated ChNFs possess controllable thickness from 2.2 to 0.8 nm, average diameter of 4-5 nm, high aspect ratio up to 10³ and customized surface chemistries. Particularly, compared with elementary nanofibrils, ChNFs with few molecular layers thick exhibit greater potential to construct high-performance structural materials, e.g., ductile nanopapers with large elongation up to 70.1% and toughness as high as 30.2 MJ m^-3 , as well as soft hydrogels with typical nonlinear elasticity mimicking that of human-skin. The proposed self-exfoliation concept with unique advantages in the combination of high yield, energy efficiency, scalable productivity, less equipment requirements, and mild conditions opens up a door to extract biopolymer nanofibrils on an industrial scale. Moreover, the present modular ChNFs exfoliation will facilitate researchers to study the effect of thickness on the properties of nanofibrils and provide more insight into the structure-function relationship of biopolymer-based materials.

Biopolymer Nanofibers for Nanogenerator Development

The development of nanogenerators (NGs) with optimal performances and functionalities requires more novel materials. Over the past decade, biopolymer nanofibers (BPNFs) have become critical sustainable building blocks in energy-related fields because they have distinctive nanostructures and properties and can be obtained from abundant and renewable resources. This review summarizes recent advances in the use of BPNFs for NG development. We will begin by introducing various strategies for fabricating BPNFs with diverse structures and performances. Then, we will systematically present the utilization of polysaccharide and protein nanofibers for NGs. We will mainly focus on the use of BPNFs to generate bulk materials with tailored structures and properties for assembling of triboelectric and piezoelectric NGs. The use of BPNFs to construct NGs for the generation of electricity from moisture and osmosis is also discussed. Finally, we illustrate our personal perspectives on several issues that require special attention with regard to future developments in this active field.