Emerging MXene@Metal-Organic Framework Hybrids: Design Strategies toward Versatile Applications

Bimetallic conductive molecular 2D metal-organic framework @ 2D MXene nanosheet heterostructure for lithium storage

Two-dimensional metal-organic frameworks (2D MOFs) have been considered to be one type of potential cathodes for lithium storage due to their regular channels and devisable redox-active sites. However, the relatively low electrical conductivity and weak long-term cyclability hindered their development. Herein, we report an optimized bimetallic conductive 2D MOF (Co1.5Ni1.5(HHTP)2) for enhanced lithium-ion storage. Specifically, the optimal 2D MOF electrode demonstrates a reversible capacity of 615.2 mAh/g at 0.2 A/g and the specific energy density up to 826 Wh Kg-1 after 100 cycles. Moreover, a heterostructure (Co1.5Ni1.5(HHTP)2@MXene) was constructed by stacking Co1.5Ni1.5(HHTP)2 MOF on the 2D Ti3C2 MXene nanosheets to improve the rate performance and cycling stability. The heterostructure electrode kept 74.1 % of the initial capacity with nearly 100 % coulombic efficiency even at 2000 cycles. Ex situ characterizations and density functional theory calculations were carried out to reveal the redox mechanism of the 2D conductive MOF. Electronic states study unveils that the quinoid oxygens and the metal centers are responsible for the redox reaction during lithiation/delithiation process, the composited 2D MXene can promote the electron transfer. The development of bimetallic mixed conductive 2D MOF @ 2D MXene heterogeneity offers valuable insights into the design of electrode materials for lithium storage.

In situ construction of 3D 1T-VS2/V2C heterostructures for enhanced polysulfide trapping and catalytic conversion in lithium-sulfur batteries

Lithium-sulfur (Li-S) batteries represent a promising next-generation energy storage solution, yet their performance is hindered by the insulating nature of sulfur and the detrimental shuttle effect. This study presents the in-situ synthesis of metal-phase 1T-VS2 as a modified separator material on a two-dimensional Mxene substrate V2C (VSC). The synergistic effect of strong adsorption by V2C and highly conductive catalysis provided by 1T-VS2 significantly enhances the transport of ions and electrons between lithium polysulfide and the interface. The combinations of experimental data and density functional theory (DFT) indicate that 1T-VS2, which is characterized by its high density of defective active sites and high conductivity, not only effectively improves the adsorption of lithium polysulfides, but also dramatically lowers the redox energy barrier of Li2S, thereby accelerating the chemical reaction kinetics. As a result, the Li-S cells assembled by the VSC-modified separator exhibit an impressive initial capacity of 1131 mAh/g at 1 C with a capacity decay rate of only 0.05% per cycle. In addition, even after 100 cycles and at a high sulfur loading of 5.6 mg cm-2, the cells maintain a discharge capacity of 817 mAh/g. Impressively, the VSC continues to deliver excellent cycling and rate performance even when the environmental temperature is reduced to 0 °C. These findings offer valuable insights into the potential for the advancement of highly practical Li-S batteries.

Excellent bisphenol A removal performance triggered by electron-transfer regime on cobalt phosphide embedded in nitrogen, sulfur-doped carbon/MXene

The non-radical pathway dominated by the electron transfer process (ETP) has gained considerable attention for the removal of organic contaminants in persulfate-based advanced oxidation processes. Rationally designing new catalysts with optimized composition and structural merits and further elucidating the enhanced removal mechanism are of great importance. In this work, we successfully synthesized a nitrogen-sulfur co-doped carbon encapsulated cobalt phosphide (Co2P) on both sides of MXene nanosheets (MZPC) to degrade bisphenol A (BPA) from organic wastewater. The results indicated that BPA was degraded by 98.2 % in a mere 5 min using 0.1 g L-1 of peroxymonosulfate (PMS) and 0.05 g L-1 of the optimized catalyst (MZPC-9), exhibiting an excellent pseudo-first-order kinetics rate constant (k = 1.485 min-1). Uniformly dispersed Co2P nanoparticles (approximately 9.4 nm, calculated using the Scherrer equation) on both sides of MXene exhibited enhanced binding affinity with PMS, forming the MZPC-9-PMS* metastable complexes with potent oxidative capability. The resultant MZPC-9-PMS* complexes induced the polymerization reaction of BPA and achieved 81 % total organic carbon (TOC) removal. This study offers a novel perspective on the design of metal active centers to enhance the ETP-dominated non-radical pathway for pollutant degradation.

An electrochemical aptamer-sensing strategy based on a Ti3C2Tx MXene synergistic Ti-MOF amplification signal for highly sensitive detection of zearalenone

A refined electrochemical aptamer sensing technique using PEI@Ti-MOF@Ti3C2Tx-MXene was developed for the sensitive detection of ZEN in food samples. A titanium-based metal-organic skeleton (NH2-MIL-125) was synthesized in situ using 2-aminoterephthalic acid as the organic ligand and tetrabutyl titanate as the metal center, followed by the simultaneous hybridization of Ti3C2Tx-MXene to synthesize a Ti-MOF@Ti3C2Tx-MXene composite material. These composites were subsequently functionalized with PEI and covalently linked to form a sensing platform on gold electrodes. Integrating a metal-organic framework (MOF) with MXene materials not only improved the electrochemical properties compared to those of individual elements but also decreased the stacking effect and increased the number of binding sites for the aptamer. The limit of detection (LOD) of this sensor was 1.64 fg mL-1. Additionally, the sensor could efficaciously detect ZEN in cornmeal and beer samples, exhibiting outstanding stability, reproducibility, and selectivity. This highlighted its effectiveness in applications in quality supervision and food safety.

Facilitating Ion Storage and Transport Pathways by In Situ Constructing 1D Carbon Nanotube Electric Bridges between 2D MXene Interlayers

Multiple van der Waals (vdW) gaps invoke abundant opportunities for contriving artificial architectures and tailoring desired properties via the intercalation route beyond the reach of conventional concepts. Intriguingly, the electrochemical intercalation strategy can precisely and reversibly tune the intercalation stage of charged functional species. This study presents a valid structural editing protocol facilitated by electrochemical intercalation to engineer MXene interlayers, ultimately incorporating in situ constructed carbon nanotube (CNT) electric bridges for enhanced ion storage and transport pathways. The method allows for the precise modulation of electrochemical forces to tailor materials for specific applications. Deep intercalation and in situ growth processes establish robust anchoring sites and connectivity hubs between MXenes and CNTs, ensuring structural homogeneity and stability in advanced electrode materials. The results demonstrate the effectiveness of electrochemistry-mediated interlayer nanoengineering in MXenes, offering a versatile approach to design vdW heterostructures with tailored functionalities for energy storage and conversion applications. This work highlights the potential of electrochemical modulation in advancing materials engineering strategies for next-generation energy storage technologies.

Sustainable ZIF-67/Mo-MXene-Derived Nanoarchitecture Synthesis: An Enhanced Durable Performance of Lithium-Selenium Batteries

Selenium-based electrodes have garnered attention for their high electrical conductivity, compatibility with carbonate electrolytes, and volumetric capacity comparable to sulfur electrodes. However, real-time application is hindered by rapid capacity deterioration from the "shuttle effect" of polyselenides and volume fluctuations. To address these challenges, a hybrid Se@ZIF-67/Mo-MXene-derived (Se@Co-NC/Mo2C) nanoarchitecture is developed via an economically viable in situ electrostatic self-assembly of ZIF-67 and Mo2C nanosheets. The catalytic effects and porous framework of Co-NC/Mo2C enhance electrode attributes, promoting superior adsorption and conversion of lithium polyselenides and facile ion/electron transport within the electrode, resulting in stable electrochemical performance. Lithium-selenium batteries (LSeBs) exhibit remarkable characteristics, boasting high specific capacity and exceptional durability. The Se@Co-NC/Mo2C electrode delivers a reversible capacity of 503.5 mAh g-1 at 0.5 C with 98% capacity retention, 100% Coulombic efficiency, and exceptional cyclic durability through 8600 cycles. In sustainability tests at 10C/1C charging/discharging, the Se@Co-NC/Mo2C electrode demonstrates an optimistic and stable capacity of ≈370.6 mAh g-1 with 93% capacity retention at the 3100th cycle in a carbonate-based electrolyte and ≈181.3 mAh g-1 with 92% capacity retention after 5000 cycles in an ether-based electrolyte, indicating exceptional stability for practical rechargeable batteries. This cost-effective and efficient approach holds significant potential for high-performance and durable LSeBs.

Recent advances of MXene@MOF composites for catalytic water splitting and wastewater treatment approaches

MXenes are a group of 2D material which have been derived from the layered transition metal nitrides and carbides and have the characteristics like electrical conductivity, high surface area and variable surface chemical composition. Self-assembly of clusters/metal ions and organic linkers forms metal organic framework (MOF). Their advantages of ultrahigh porosity, highly exposed active sites and many pore architectures have garnered them a lot of attention. But poor conductivity and instability plague several conventional MOF. To address the issue, MOF can be linked with MXenes that have rich surface functional groups and excellent electrical conductivity. In this review, different etching methods for exfoliation of MXene along with the synthesis methods of MXene/MOF composites are reviewed, including hydrothermal method, solvothermal method, in-situ growth method, and self-assembly method. Moreover, application of these MXene/MOF composites for catalytic water splitting and wastewater treatment were also discussed in details. In addition to increasing a single MOF conductivity and stability, MXenes can add a variety of new features, such the template effect. Due to these benefits, MXene/MOF composites can be effectively used in several applications, including photocatalytic/electrocatalytic water splitting, adsorption and degradation of pollutants from wastewater. Finally, the authors explored the current challenges and the future opportunities to improve the efficiency of MXene/MOF composites.

Multimodal Affinity-Modulated Efficient Separation of Lysozyme with a Hierarchical MXene@MOF Hybrid Framework

The development of abiotic protein affinity adsorbents remains challenging for the accurate acquisition and analysis of specific protein species. Inspired by bacterial cell walls, a hierarchical hybrid framework is fabricated through the oriented growth of an Fe-based metal organic framework (MOF) on V2C MXene for the efficient separation of lysozyme (Lys). After directed evolution of adsorptive materials, the MXene@MOF composite rich in hydroxyl groups (termed as MX@MOF-DH) is found exerting exceptional affinity for Lys. Benefiting from hydrogen-bonding, coordination, and electrostatic interaction-mediated multimodal and multivalent affinity, MX@MOF-DH reveals rapid adsorption rate (5 min), superb enrichment factor (83.1), and favorable binding capacity (609.7 mg g-1), which outperforms other latest adsorbents. Moreover, femtomolar sensitivity is achieved even in the presence of high-abundant interfering proteins, as confirmed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometer analysis. This work not only provides an efficient approach for selective enrichment of lysozyme but also paves an avenue to construct the protein affinity reagents for specific biological medicine and analysis applications.

Metal-organic framework/Nb4C3Tx MXene composites for ultrasensitive detection of dopamine

An easy, in situ growth approach led to the formation of several composites of metal-organic framewoks and Nb4C3Tx MXenes mixed intimately at the submicron scale. The high affinity of MXene surface for dopamine, enhanced by a nanostructuration induced by MOFs, resulted in superior sensing performances. The system exhibited good linearity over the 1-100 nM range, with an excellent limit of detection of 0.2 nM.

Designing a Se-intercalated MOF/MXene-derived nanoarchitecture for advancing the performance and durability of lithium-selenium batteries

Lithium-selenium batteries have emerged as a promising alternative to lithium-sulfur batteries due to their high electrical conductivity and comparable volume capacity. However, challenges such as the shuttle effect of polyselenides and high-volume fluctuations hinder their practical implementation. To address these issues, we propose synthesizing Fe-CNT/TiO2 catalyst through high-temperature sintering of an amalgamated nanoarchitecture of carbon nanotubes decorated metal-organic framework (MOF) and MXene, optimized for efficient selenium hosting, leveraging the distinctive physicochemical properties. The catalytic features inherent in the porous Se@Fe-CNT/TiO2 nanoarchitecture were instrumental in promoting efficient ion and electron transport, and lithium-polyselenide kinetics, while its inherent porosity could play a crucial role in inhibiting electrode stress during cycling. This nanoarchitecture exhibits remarkable battery performance, retaining 99.7% of theoretical capacity after 425 cycles at 0.5 C rate and demonstrating 95.8% capacity retention after 2000 cycles at 1 C rate, with ∼100% Coulombic efficiency. Additionally, the Se@Fe-CNT/TiO2 electrode exhibited an impressive recovery of 297.5 mAh/g (97.9%) capacity after undergoing 450 cycles at a charging rate of 10 C and a discharging rate of 1 C. This synergistic integration of MOF- and MXene-derived materials unveils new possibilities for high-performance and durable LSeBs, thus advancing electrochemical energy storage systems.

Interface-Engineered 2D Heterojunction with Photoelectric Dual Gain: Mxene@MOF-Enhanced SPR Spectroscopy for Direct Sensing of Exosomes

MXene is widely used in the construction of optoelectronic interfaces due to its excellent properties. However, the hydrophilicity and metastable surface of MXene lead to its oxidation behavior, resulting in the degradation of its various properties, which seriously limits its practical application. In this work, a 2D metal-organic framework (2D MOF) with matching 2D morphology, excellent stability performance, and outstanding optoelectronic performance is grown in situ on the MXene surface through heterojunction engineering to suppress the direct contact between reactive molecules and the inner layer material without affecting the original advantages of MXene. The photoelectric dual gain MXene@MOF heterojunction is confirmed. As a photoelectric material, its properties are highly suitable for the demand of interface sensitization layer materials of surface plasmon resonance (SPR). Therefore, using SPR as a platform for the application of this interface material, the performance of MXene@MOF and its potential mechanism to enhance SPR are analyzed in depth using experiments combined with simulation calculations (FDTD/DFT). Finally, the MXene@MOF/peptides-SPR sensor is constructed for rapid and sensitive detection of the cancer marker exosomes to explore its potential in practical applications. This work offers a forward-looking strategy for the design of interface materials with excellent photoelectric performance.

Supramolecular Engineering of Ti3C2Tx MXene -Perylene Diimide Hybrid Electrodes for the Pseudocapacitive Electrochemical Storage of Calcium Ions

The rare combination of metallic conductivity and surface redox activity enables 2D MXenes as versatile charge storage hosts for the design of high-rate electrochemical energy storage devices. However, high charge density metal ions including but not limited to Ca+2 and Mg+2 pose challenges such as sluggish solid-state diffusion and also inhibiting the charge transfer across electrode-electrolyte interfaces. In this work, free-standing hybrid electrode architectures based on 2D titanium carbide-cationic perylene diimide (Ti3C2Tx@cPDI) via supramolecular self-assembly are developed. Secondary bonding interactions such as dipole-dipole and hydrogen bonding between Ti3C2Tx and cPDI are investigated by zeta potential and Fourier-transformed infrared (FTIR) spectroscopy . Ti3C2Tx@cPDI free-standing electrodes show typical volumetric capacitance up to 260 F cm-3 in Mg2+ and Ca2+ aqueous electrolytes at charging times scales from 3 minutes to a few seconds. Three-dimensional (3D) Bode maps are constructed to understand the charge storage dynamics of Ti3C2Tx@cPDI hybrid electrode in an aqueous Ca-ion electrolyte. ,Pseudocapacitance is solely contributed by the nanoscale distribution of redox-active cPDI supramolecular polymers across 2D Ti3C2Tx. This study opens avenues for the design of a wide variety of MXene@redox active organic charge hosts for high-rate pseudocapacitive energy storage devices.

Interface Engineering-Modulated Nanoscale Bimetallic CoFe-MIL-88A In-Situ-Grown on 2D V2CTx MXene for Electrocatalytic Nitrogen Reduction

The electrochemical nitrogen reduction reaction (eNRR) provides a sustainable green development route for the nitrogen-neutral cycle. In this work, bimetallic CoFe-MIL-88A with two active sites (Fe, Co) were immobilized on a 2D V2CTx MXene surface by in situ growth method to achieve the purpose of the control interface. A large number of heterostructures are formed between small CoFe-MIL-88A and V2CTx, which regulate the electron transfer between the catalyst interfaces. The adsorption and activation of nitrogen on the active sites were enhanced, and the NRR reaction kinetics was accelerated. CoFe-MIL-88A is tightly arranged on V2CTx, which makes CoFe-MIL-88A/V2CTx have better hydrophobicity and can significantly inhibit the hydrogen evolution reaction. The synergistic effect of multicatalytic active sites and multi-interface structure of CoFe-MIL-88A/V2CTx MXene is propitious to nitrogen efficiently and stably to convert into ammonia under environmental conditions with superior selectivity and good catalytic activity. The NH3 yield rate is 29.47 μg h-1 mgcat-1 at -0.3 V vs RHE, and the Faradaic efficiency (FE) is 28.86% at -0.1 V vs RHE. The catalytic mechanism was verified to conform to the distal pathway. This work will provide a new way to develop an MXene-based electrocatalyst for eNRR.

Progress and Perspective in harnessing MXene-carbon-based composites (0-3D): Synthesis, performance, and applications

MXene is recognized as a promising catalyst for versatile applications due to its abundant metal sites, physicochemical properties, and structural formation. This comprehensive review offers an in-depth analysis of the incorporation of carbon into MXene, resulting in the formation of MXene-carbon-based composites (MCCs). Pristine MXene exhibits numerous outstanding characteristics, such as its atomically thin 2D structure, hydrophilic surface nature, metallic electrical conductivity, and substantial specific surface area. The introduction of carbon guides the assembly of MCCs through electrostatic self-assembly, pairing positively charged carbon with negatively charged MXene. These interactions result in increased interlayer spacing, reduced ion/electron transport distances, and enhanced surface hydrophilicity. Subsequent sections delve into the synthesis methods for MCCs, focusing on MXene integrated with various carbon structures, including 0D, 1D, 2D, and 3D carbon. Comprehensive discussions explore the distinctive properties of MCCs and the unique advantages they offer in each application domain, emphasizing the contributions and advancements they bring to specific fields. Furthermore, this comprehensive review addresses the challenges encountered by MCCs across different applications. Through these analyses, the review promotes a deeper understanding of exceptional characteristics and potential applications of MCCs. Insights derived from this review can serve as guidance for future research and development efforts, promoting the widespread utilization of MCCs across a broad spectrum of disciplines and spurring future innovations.

MXene-supported MIL-88A(Fe) as persulfate activator for removal of tetracycline

The poor conductivity, poor stability, and agglomeration of iron-based metal organic framework MIL-88A(Fe) limit its application as persulfate (PS) activator in water purification. Herein, MXene-supported MIL-88A(Fe) composites (M88A/MX) were synthesized to enhance its adsorption and catalytic capability for tetracycline (TC) removal. Scanning electron microscope (SEM), X-ray diffractometer (XRD), Fourier transform infrared spectrometer (FT-IR), and X-ray photoelectron spectroscopy (XPS) were used to characterize prepared materials, confirming the successful attachment of MIL-88A(Fe) to the surface of MXene. M88A/MX-0.2 composites, prepared with 0.2 g MXene addition, exhibit optimal degradation efficiency, reaching 98% under conditions of 0.2 g/L M88A/MX-0.2, 1.0 mM PS, 20 ppm TC, and pH 5. The degradation rate constants of M88A/MX-0.2 were 0.03217 min-1, which was much higher than that of MIL-88A(Fe) (0.00159 min-1) and MXene (0.00626 min-1). The removal effects of reaction parameters, such as dosage of M88A/MX-0.2 and PS; initial solution pH; and the presence of the common co-existing constituents (humic acid and the inorganic anions) were investigated in detail. Additionally, the reuse of M88A/MX-0.2 showed that the composites had good cycling stability by recurrent experiments. The results of electron paramagnetic resonance (EPR) and quenching experiments indicated that ·OH, ·SO4-, and ·O2- were involved in the M88A/MX-0.2/PS system where persulfate oxidation process was activated with prepared M88A/MX-0.2. In addition, the intermediates of photocatalytic degradation were determined by HPLC-MS, and the possible degradation pathways of the target molecules were inferred. This study offered a new avenue for sulfate-based degradation of Fe-based metal organic framework.

Porous materials as effective chemiresistive gas sensors

Chemiresistive gas sensors (CGSs) have revolutionized the field of gas sensing by providing a low-power, low-cost, and highly sensitive means of detecting harmful gases. This technology works by measuring changes in the conductivity of materials when they interact with a testing gas. While semiconducting metal oxides and two-dimensional (2D) materials have been used for CGSs, they suffer from poor selectivity to specific analytes in the presence of interfering gases and require high operating temperatures, resulting in high signal-to-noise ratios. However, nanoporous materials have emerged as a promising alternative for CGSs due to their high specific surface area, unsaturated metal actives, and density of three-dimensional inter-connected conductive and pendant functional groups. Porous materials have demonstrated excellent response and recovery times, remarkable selectivity, and the ability to detect gases at extremely low concentrations. Herein, our central emphasis is on all aspects of CGSs, with a primary focus on the use of porous materials. Further, we discuss the basic sensing mechanisms and parameters, different types of popular sensing materials, and the critical explanations of various mechanisms involved throughout the sensing process. We have provided examples of remarkable performance demonstrated by sensors using these materials. In addition to this, we compare the performance of porous materials with traditional metal-oxide semiconductors (MOSs) and 2D materials. Finally, we discussed future aspects, shortcomings, and scope for improvement in sensing performance, including the use of metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and porous organic polymers (POPs), as well as their hybrid counterparts. Overall, CGSs using porous materials have the potential to address a wide range of applications, including monitoring water quality, detecting harmful chemicals, improving surveillance, preventing natural disasters, and improving healthcare.

Synthesis of Hierarchical CF@Fe3O4 Fibers Decorated with MoS2 Layers Forming Core-Sheath Microstructure toward Tunable and Efficient Electromagnetic Wave Absorption

Hierarchical structural design has been verified as a feasible strategy to fabricate effective electromagnetic wave (EMW) absorbers, so we designed hierarchical core-sheath composites with magnetic particles and dielectric layers. In this work, a hierarchical structure of carbon fiber (CF)@Fe3O4@MoS2 (CPDF7-M) was prepared by introducing Fe3O4 and depositing MoS2 layers on the surface of fibers. Due to the synergistic effects from the CF@Fe3O4 increasing the conductive and magnetic loss and the outer MoS2 layers improving the impedance matching, the optimal reflection loss (RL) value was -63.1 dB at 2.7 mm and the effective absorption bandwidth (EAB) was 9.1 GHz covering the X and Ku band. Moreover, the EAB values were adjusted with a specific MoS2 loading at different thicknesses, which provided the necessary reference for the construction of efficient and flexible absorbers in the EMW absorption fields.

Optically Active MXenes in Van der Waals Heterostructures

The vertical integration of distinct 2D materials in van der Waals (vdW) heterostructures provides the opportunity for interface engineering and modulation of electronic as well as optical properties. However, scarce experimental studies reveal many challenges for vdW heterostructures, hampering the fine-tuning of their electronic and optical functionalities. Optically active MXenes, the most recent member of the 2D family, with excellent hydrophilicity, rich surface chemistry, and intriguing optical properties, are a novel 2D platform for optoelectronics applications. Coupling MXenes with various 2D materials into vdW heterostructures can open new avenues for the exploration of physical phenomena of novel quantum-confined nanostructures and devices. Therefore, the fundamental basis and recent findings in vertical vdW heterostructures composed of MXenes as a primary component and other 2D materials as secondary components are examined. Their robust designs and synthesis approaches that can push the boundaries of light-harvesting, transition, and utilization are discussed, since MXenes provide a unique playground for pursuing an extraordinary optical response or unusual light conversion features/functionalities. The recent findings are finally summarized, and a perspective for the future development of next-generation vdW multifunctional materials enriched by MXenes is provided.

Defective porphyrin-based metal-organic framework nanosheets derived from V2CTx MXene as a robust bioplatform for impedimetric aptasensing 17β-estradiol

An electrochemical aptasensor was prepared for the efficient, sensitive, and selective detection of 17β-estradiol. The sensor was based on a defective two-dimensional porphyrin-based metal-organic framework derived from V₂CT_x MXene. The resulting metal-organic framework nanosheets benefited from the advantages of V₂CT_x MXene nanosheets and porphyrin-based metal-organic framework, two-dimensional porphyrin-based metal-organic framework nanosheets demonstrated amplified electrochemical response and enhanced aptamer-immobilization ability compared with V₂CT_x MXene nanosheets. The sensor's detection limit was ultralow at 0.81 fg mL^-1 (2.97 fM), and the 17β-estradiol concentration range was wide, thereby outperforming most reported aptasensors. The high selectivity, superior stability and reproducibility, and excellent regeneration performance of the constructed aptasensor indicated its remarkable potential application for 17β-estradiol determination in diverse real samples. This aptasensing strategy can be used to analyze other targets by replacing the corresponding aptamer.

Recent strategies for constructing hierarchical multicomponent nanoparticles/metal-organic framework hybrids and their applications

Hybrid nanoparticles with unique tailored morphologies and compositions can be utilized for numerous applications owing to their combination of inherent properties as well as the structural and supportive functions of each component. Controlled encapsulation of nanoparticles within nanospaces (NPNSs) of metal-organic frameworks (MOFs) (denoted as NPNS@MOF) can generate a large number of hybrid nanomaterials, facilitating superior activity in targeted applications. In this review, recent strategies for the fabrication of NPNS@MOFs with a hierarchical architecture, tailorability, unique intrinsic properties, and superior catalytic performance are summarized. In addition, the latest and most important examples in this sector are emphasized since they are more conducive to the practical applicability of NPNS@MOF nanohybrids.

Electrochemical CNT filter functionalized with metal-organic framework for one-step antimonite decontamination

Currently, there is a lack of advanced nanotechnology designed to efficiently remove antimony (Sb) from contaminated water systems. Sb most commonly appears as antimonite (Sb(III)) or as the anion antimonate (Sb(V)). Sb(III) is approximately ten times more toxic than Sb(V), and Sb(III) is also harder to eliminate because of its motility and charge neutrality. The work presented here developed an electrochemical filtration technology for the direct elimination of Sb(III) from contaminated water. The primary components of the filtration system are an electroactive carbon nanotube (CNT) membrane that are functionalized with the Sb-specific UiO-66(Zr), an organometallic framework. In an electric field, the UiO-66(Zr)/CNT nanohybrid filter enabled in situ transformation of Sb(III) to less harmful Sb(V). The Sb(V) was then effectively adsorbed by the UiO-66(Zr). The removal efficiency (90.5%) and rate constant (k₁ = 0.0272 min^-1) toward Sb(III) removal was 1.3 and 1.4 times greater than that of CNT filter. The filter's abundance of available adsorption sites, flow-through construction, and electrochemical activity combined to rapidly remove Sb(III) from water. The underlying functioning of the nanohybrid filter was determined with a series of process experiments and structural characterizations. The filter was effective over a broad range of pH values and in a variety of complex aqueous environments. Once loaded with Sb, the UiO-66(Zr)/CNT filter could be washed with a dilute NaOH solution to efficiently refresh its activity. The results of this work offer a direct, efficient strategy that integrates nanotechnology, electrochemistry, and membrane separation to remove antimony and potentially other heavy metals from contaminated water.

Collaborative Interface Optimization Strategy Guided Ultrafine RuCo and MXene Heterostructure Electrocatalysts for Efficient Overall Water Splitting

Developing highly active and robust electrocatalysts for the hydrogen/oxygen evolution reaction (HER/OER) is crucial for the large-scale utilization of green hydrogen. In this study, a collaborative interface optimization guided strategy was employed to prepare a metal-organic framework (MOF) derived heterostructure electrocatalyst (MXene@RuCo NPs). The obtained electrocatalyst requires overpotentials of only 20 mV for the HER and 253 mV for the OER to deliver a current density of 10 mA/cm² in alkaline media, respectively, and it also exhibits great performance at high current density. Experiments and theoretical calculations reveal that the doped Ru introduces second active sites and decreases the diameter of nanoparticles, which greatly enhances the number of active sites. More importantly, the MXene/RuCo NPs heterogeneous interfaces in the catalysts exhibit great synergistic effects, decreasing the work function of the catalyst and improving the charge transfer rate, thus reducing the energy barrier of the catalytic reaction. This work represents a promising strategy for the development of MOF-derived highly active catalysts to achieve efficient energy conversion in industrial applications.

Interfacial Engineering of Bimetallic Ni/Co-MOFs with H-Substituted Graphdiyne for Ammonia Electrosynthesis from Nitrate

The electrochemical synthesis of ammonia is highly dependent on the coupling reaction between nitrate and water, for which an electrocatalyst with a multifunctional interface is anticipated to promote the deoxygenation and hydrogenation of nitrate with water. Herein, by engineering the surface of bimetallic Ni/Co-MOFs (NiCoBDC) with hydrogen-substituted graphdiyne (HsGDY), a hybrid nanoarray of NiCoBDC@HsGDY with a multifunctional interface has been achieved toward scale-up of the nitrate-to-ammonia conversion. On the one hand, a partial electron transfers from Ni²⁺ to the coordinatively unsaturated Co²⁺ on the surface of NiCoBDC, which not only promotes the deoxygenation of *NO₃ on Co²⁺ but also activates the water-dissociation to *H on Ni²⁺. On the other hand, the conformal coated HsGDY facilitates both electrons and NO₃^- ions gathering on the interface between NiCoBDC and HsGDY, which moves forward the rate-determining step from the deoxygenation of *NO₃ to the hydrogenation of *N with both *H on Ni²⁺ and *H₂O on Co²⁺. As a result, such a NiCoBDC@HsGDY nanoarray delivers high NH₃ yield rates with Faradaic efficiency above 90% over both wide potential and pH windows. When assembled into a galvanic Zn-NO₃^- battery, a power density of 3.66 mW cm^-2 is achieved, suggesting its potential in the area of aqueous Zn-based batteries.

Metal-Organic Framework Composites and Their Derivatives as Efficient Electrodes for Energy Storage Applications: Recent Progress and Future Perspectives

Metal-organic frameworks (MOFs) have been important electrochemical energy storage (EES) materials because of their rich species, large specific surface area, high porosity and rich active sites. Nevertheless, the poor conductivity, low mechanical and electrochemical stability of pristine MOFs have hindered their further applications. Although single component MOF derivatives have higher conductivity, self-aggregation often occurs during preparation. Composite design can overcome the shortcomings of MOFs and derivatives and create synergistic effects, resulting in improved electrochemical properties for EES. In this review, recent applications of MOF composites and derivatives as electrodes in different types of batteries and supercapacitors are critically discussed. The advantages, challenges, and future perspectives of MOF composites and derivatives have been given. This review may guide the development of high-performance MOF composites and derivatives in the field of EES.

Recent Advances and Perspectives of Lewis Acidic Etching Route: An Emerging Preparation Strategy for MXenes

Since the discovery in 2011, MXenes have become the rising star in the field of two-dimensional materials. Benefiting from the metallic-level conductivity, large and adjustable gallery spacing, low ion diffusion barrier, rich surface chemistry, superior mechanical strength, MXenes exhibit great application prospects in energy storage and conversion, sensors, optoelectronics, electromagnetic interference shielding and biomedicine. Nevertheless, two issues seriously deteriorate the further development of MXenes. One is the high experimental risk of common preparation methods such as HF etching, and the other is the difficulty in obtaining MXenes with controllable surface groups. Recently, Lewis acidic etching, as a brand-new preparation strategy for MXenes, has attracted intensive attention due to its high safety and the ability to endow MXenes with uniform terminations. However, a comprehensive review of Lewis acidic etching method has not been reported yet. Herein, we first introduce the Lewis acidic etching from the following four aspects: etching mechanism, terminations regulation, in-situ formed metals and delamination of multi-layered MXenes. Further, the applications of MXenes and MXene-based hybrids obtained by Lewis acidic etching route in energy storage and conversion, sensors and microwave absorption are carefully summarized. Finally, some challenges and opportunities of Lewis acidic etching strategy are also presented.

In Situ Growth of Ni-MOF Nanorods Array on Ti3C2Tx Nanosheets for Supercapacitive Electrodes

For the energy supply of smart and portable equipment, high performance supercapacitor electrode materials are drawing more and more concerns. Conductive Ni-MOF is a class of materials with higher conductivity compared with traditional MOFs, but it continues to lack stability. Specifically, MXene (Ti3C2Tx) has been employed as an electrochemical substrate for its high mechanical stability and abundant active sites, which can be combined with MOFs to improve its electrochemical performance. In this paper, a novel Ni-MOF nanorods array/Ti3C2Tx nanocomposite was prepared via a facile hydrothermal reaction, which makes good use of the advantages of conductive Ni-MOF and high strength Ti3C2Tx. The high density forest-like Ni-MOF array in situ grown on the surface of Ti3C2Tx can provide abundant active electrochemical sites and construct a pathway for effective ion transport. The formation of a "Ti-O···Ni" bond accomplished during an in situ growth reaction endows the strong interfacial interaction between Ni-MOF and Ti3C2Tx. As a result, the Ni-MOF/Ti3C2Tx nanocomposite can achieve a high specific capacitance of 497.6 F·g-1 at 0.5 A·g-1 and remain over 66% of the initial capacitance when the current density increases five times. In addition, the influence of the Ti3C2Tx concentration and reaction time on the morphology and performance of the resultant products were also investigated, leading to a good understanding of the formation process of the nanocomposite and the electrochemical mechanism for a supercapacitive reaction.

2D MXene-Based Biosensing: A Review

MXene emerged as decent 2D material and has been exploited for numerous applications in the last decade. The remunerations of the ideal metallic conductivity, optical absorbance, mechanical stability, higher heterogeneous electron transfer rate, and good redox capability have made MXene a potential candidate for biosensing applications. The hydrophilic nature, biocompatibility, antifouling, and anti-toxicity properties have opened avenues for MXene to perform in vitro and in vivo analysis. In this review, the concept, operating principle, detailed mechanism, and characteristic properties are comprehensively assessed and compiled along with breakthroughs in MXene fabrication and conjugation strategies for the development of unique electrochemical and optical biosensors. Further, the current challenges are summarized and suggested future aspects. This review article is believed to shed some light on the development of MXene for biosensing and will open new opportunities for the future advanced translational application of MXene bioassays.

Graphene-Based Metal-Organic Framework Hybrids for Applications in Catalysis, Environmental, and Energy Technologies

Current energy and environmental challenges demand the development and design of multifunctional porous materials with tunable properties for catalysis, water purification, and energy conversion and storage. Because of their amenability to de novo reticular chemistry, metal-organic frameworks (MOFs) have become key materials in this area. However, their usefulness is often limited by low chemical stability, conductivity and inappropriate pore sizes. Conductive two-dimensional (2D) materials with robust structural skeletons and/or functionalized surfaces can form stabilizing interactions with MOF components, enabling the fabrication of MOF nanocomposites with tunable pore characteristics. Graphene and its functional derivatives are the largest class of 2D materials and possess remarkable compositional versatility, structural diversity, and controllable surface chemistry. Here, we critically review current knowledge concerning the growth, structure, and properties of graphene derivatives, MOFs, and their graphene@MOF composites as well as the associated structure-property-performance relationships. Synthetic strategies for preparing graphene@MOF composites and tuning their properties are also comprehensively reviewed together with their applications in gas storage/separation, water purification, catalysis (organo-, electro-, and photocatalysis), and electrochemical energy storage and conversion. Current challenges in the development of graphene@MOF hybrids and their practical applications are addressed, revealing areas for future investigation. We hope that this review will inspire further exploration of new graphene@MOF hybrids for energy, electronic, biomedical, and photocatalysis applications as well as studies on previously unreported properties of known hybrids to reveal potential "diamonds in the rough".

Structural Regulation of Oxygen Vacancy-Rich K0.5 Mn2 O4 Cathode by Carbon Hybridization for Enhanced Zinc-Ion Energy Storage

High-voltage manganese-based materials are considered as promising cathode materials for aqueous zinc-ion batteries (AZIBs). Herein, oxygen vacancy-rich K_0.5 Mn₂ O₄ sheets were anchored uniformly onto honeycomb-like interconnected carbon nanoflakes (CNF@K_0.5 Mn₂ O₄ ) for AZIB cathode applications. In the composite, the CNFs provided excellent intergranular electron transport capability, while the oxygen vacancies enhanced the electron transport efficiency inside crystals, and the embedded K ions expanded the interlayer spacing and stabilized the layered crystal structure. A reversible specific capacity of 241 mAh g^-1 could be maintained by the composite at 0.5 A g^-1 for 400 cycles. A combination of ex-situ analytical methods and density functional theory calculations was carried out to elucidate the electrochemical mechanism of reversible zinc storage. In addition, flexible quasi-solid-state batteries of Zn//CNF@K_0.5 Mn₂ O₄ were constructed by substituting the traditional aqueous electrolyte for a quasi-solid-state gel electrolyte, which worked efficiently and exhibited high bending durability.

Approaches to Enhancing Electrical Conductivity of Pristine Metal-Organic Frameworks for Supercapacitor Applications

Metal-organic frameworks (MOFs), known as porous coordination polymers, have attracted intense interest as electrode materials for supercapacitors (SCs) owing to their advantageous features including high surface area, tunable porous structure, structural diversity, etc. However, the insulating nature of most MOFs has impeded their further electrochemical applications. A common solution for this issue is to transform pristine MOFs into more stable and conductive metal compounds/porous carbon materials through pyrolysis, which however losses the inherent merits of MOFs. To find a consummate solution, recently a surge of research devoted to improving the electrical conductivity of pristine MOFs for SCs has been carried out. In this review, the most related research work on pristine MOF-based materials is reviewed and three effective strategies (chemical structure design of conductive MOFs (c-MOFs), composite design, and binder-free structure design) which can significantly increase their conductivity and consequently the electrochemical performance in SCs are proposed. The conductivity enhancement mechanism in each approach is well analyzed. The representative research works on using pristine MOFs for SCs are also critically discussed. It is hoped that the new insights can provide guidance for developing high-performance electrode materials based on pristine MOFs with high conductivity for SCs in the future.

TiVCTx MXene/Chalcogenide Heterostructure-Based High-Performance Magnesium-Ion Battery as Flexible Integrated Units

Magnesium-ion batteries (MIB) have gradually attracted attention owing to their high theoretical capacity, high safety, and low cost. A bimetallic metal-organic framework self-sacrificing template and a co-assembly strategy are used to prepare a high-performance, stable cycling NiSe₂ -CoSe₂ @TiVCT_x (NCSe@TiVC) heterostructure MIB cathode that can be used as a flexible integrated unit to power future self-powered systems. Benefiting from the synergistic effect of TiVCT_x MXene and NCSe, the NCSe@TiVC heterostructure electrode has a discharge-specific capacity of 136 mAh g^-1 at 0.05 A g^-1 and high cycling stability of over 500 cycles; the assembled pouch-cell device as flexible integrated unit exhibits good practicability. The magnesium ion storage mechanism is also validated using quantitative kinetic analysis, ex situ XRD, and XPS techniques. Density functional theory analysis indicates the most stable Mg-atom adsorption sites in the heterostructure. This study broadens the possibilities for applying the TiVCT_x MXene heterostructure to energy storage materials and future self-powered flexible systems.

The Emergence of 2D MXenes Based Zn-Ion Batteries: Recent Development and Prospects

Rechargeable zinc-ion batteries (ZIBs) with exceptional theoretical capacity have garnered significant interest in large-scale electrochemical energy storage devices due to their low cost, abundant material, inherent safety, high specific energy, and ecofriendly nature. Metal carbides/nitrides, known as MXenes, have emerged as a large family of 2D transition metal carbides or carbonitrides with excellent properties, e.g., high electrical conductivity, large surface functional groups (e.g., F, O, and OH), low energy barriers for the diffusion of electrolyte ions with wide interlayer spaces. After a decade of effort, significant development has been achieved in the synthesis, properties, and applications of MXenes. Thus, it has opened up various exciting opportunities to construct advanced MXene-based nanostructures for ZIBs with excellent specific energy and power. Herein, this review summarizes the advances across multiple synthesis routes, related properties, morphological and structural characteristics, and chemistries of MXenes for ZIBs. The recent development of MXene-based electrodes is introduced, and electrolytes for ZIBs are elucidated in detail. MXene-based rocking chair ZIBs, strategies to enhance the performance of MXene-based cathodes, suppress the dendrites in MXene-based anodes, and MXene-based flexible ZIBs are pointed out. A rational design and modification of the MXenes as well as the production of composites with metal oxides exhibits promise in solving issues and enhancing the electrochemical performance of ZIBs. Finally, the present challenges and future prospects for MXene-based ZIBs are discussed.

Metal–organic framework (MOF)-, covalent-organic framework (COF)-, and porous-organic polymers (POP)-catalyzed selective C–H bond activation and functionalization reactions

The review summarizes the state-of-the-art of C–H active transformations over crystalline and amorphous porous materials as new emerging heterogeneous (photo)catalysts.