Photonic Encryption Platform via Dual-Band Vectorial Metaholograms in the Ultraviolet and Visible

Advanced lithography materials: From fundamentals to applications

The semiconductor industry has long been driven by advances in a nanofabrication technology known as lithography, and the fabrication of nanostructures on chips relies on an important coating, the photoresist layer. Photoresists are typically spin-coated to form a film and have a photolysis solubility transition and etch resistance that allow for rapid fabrication of nanostructures. As a result, photoresists have attracted great interest in both fundamental research and industrial applications. Currently, the semiconductor industry has entered the era of extreme ultraviolet lithography (EUVL) and expects photoresists to be able to fabricate sub-10 nm structures. In order to realize sub-10 nm nanofabrication, the development of photoresists faces several challenges in terms of sensitivity, etch resistance, and molecular size. In this paper, three types of lithographic mechanisms are reviewed to provide strategies for designing photoresists that can enable high-resolution nanofabrication. The discussion of the current state of the art in optical lithography is presented in depth. Practical applications of photoresists and related recent advances are summarized. Finally, the current achievements and remaining issues of photoresists are discussed and future research directions are envisioned.

Multi-Dimensional Multiplexed Metasurface Holography by Inverse Design

Multi-dimensional multiplexed metasurface holography extends holographic information capacity and promises revolutionary advancements for vivid imaging, information storage, and encryption. However, achieving multifunctional metasurface holography by forward design method is still difficult because it relies heavily on Jones matrix engineering, which places high demands on physical knowledge and processing technology. To break these limitations and simplify the design process, here, an end-to-end inverse design framework is proposed. By directly linking the metasurface to the reconstructed images and employing a loss function to guide the update of metasurface, the calculation of hologram can be omitted; thus, greatly simplifying the design process. In addition, the requirements on the completeness of meta-library can also be significantly reduced, allowing multi-channel hologram to be achieved using meta-atoms with only two degrees of freedom, which is very friendly to processing. By exploiting the proposed method, metasurface hologram containing up to 12 channels of multi-wavelength, multi-plane, and multi-polarization is designed and experimentally demonstrated, which exhibits the state-of-the-art information multiplexing capacity of the metasurface composed of simple meta-atoms. This method is conducive to promoting the intelligent design of multifunctional meta-devices, and it is expected to eventually accelerate the application of meta-devices in colorful display, imaging, storage and other fields.

Solution to the issue of high-order diffraction images for cylindrical computer-generated holograms

The cylindrical computer-generated hologram (CCGH), featuring a 360° viewing zone, has garnered widespread attention. However, the issue of high-order diffraction images due to pixelated structure in CCGH has not been previously reported and solved. For a cylindrical model offering a 360° viewing zone in the horizontal direction, the high-order diffraction images always overlap with the reconstruction image, leading to quality degradation. Furthermore, the 4f system is commonly used to eliminate high-order diffraction images in planar CGH, but its implementation is predictably complex for a cylindrical model. In this paper, we propose a solution to the issue of high-order diffraction images for CCGH. We derive the cylindrical diffraction formula from the outer hologram surface to the inner object surface in the spectral domain, and based on this, we subsequently analyze the effects brought by the pixel structure and propose the high-order diffraction model. Based on the proposed high-order diffraction model, we use the gradient descent method to optimize CCGH accounting for all diffraction orders simultaneously. Furthermore, we discuss the issue of circular convolution due to the periodicity of the Fast Fourier Transform (FFT) in cylindrical diffraction. The correctness of the proposed high-order diffraction model and the effectiveness of the proposed optimization method are demonstrated by numerical simulation. To our knowledge, this is the first time that the issue of high-order diffraction images in CCGH has been proposed, and we believe our solution can offer valuable guidance to practitioners in the field.

A water-soluble label for food products prevents packaging waste and counterfeiting

Sustainability, humidity sensing and product origin are important features of food packaging. While waste generated from labelling and packaging causes environmental destruction, humidity can result in food spoilage during delivery and counterfeit-prone labelling undermines consumer trust. Here we introduce a food label based on a water-soluble nanocomposite ink with a high refractive index that addresses these issues. By patterning the nanocomposite ink using nanoimprint lithography, the resultant metasurface shows bright and vivid structural colours. This method makes it possible to quickly and inexpensively create patterns on large surfaces. A QR code is also developed that can provide up-to-date information on food products. Microprinting hidden in the QR code protects against counterfeiting, cannot be physically detached or replicated and may be used as a humidity indicator. Our proposed food label can reduce waste while ensuring customers receive accurate product information.

Switchable Two-Dimensional AND and Exclusive OR Operation Based on Dual-Wavelength Metasurfaces

Logic operation serves as the foundation and core element of computing networks; it will bring huge vitality to advanced information processing with its adaptation in the optical domain. As fundamental logic operations, AND and exclusive OR (XOR) operations serve a multitude of purposes, such as their ability to cooperate in enabling image processing and interpretation. Here, we propose and experimentally demonstrate a wavelength multiplexed AND and XOR function based on metasurfaces. By combining two cosine gratings with distinct frequencies and an initial phase difference of π/2, we extract the similarities and differences between two input images simultaneously by illuminating them with 445 and 633 nm wavelengths. Additionally, we explore its potential in information encryption, where overall security is enhanced by distributing distinct parts of initial information and encoded keys to different receivers. This design possesses the benefits of convenient mode switching and high-quality imaging, facilitating advanced applications in pattern recognition, machine vision, medical diagnosis, etc.

Thermal tuning nanoprinting based on liquid crystal tunable dual-layered metasurfaces for optical information encryption

Dynamic tuning metasurfaces represent a significant advancement in optical encryption techniques, enabling highly secure multichannel responses. This paper proposes a liquid crystal (LC) tunable dual-layered metasurface to establish a thermal-encrypted optical platform for information storage. Through the screening of unit cells and coupling of characteristics, a dynamic polarization-dependent beam-steering metasurface is vertically cascaded with an angular multiplexing nanoprinting metasurface, separated by a dielectric layer. By integrating high-birefringence LCs into dual-layered metasurfaces, the cascaded meta-system can achieve dynamic thermal-switching for pre-encoded nanoprinting images. This work provides a promising solution for developing compact dynamic meta-systems for customized optical storage and information encryption.

Spin-Selective Angular Dispersion Control in Dielectric Metasurfaces for Multichannel Meta-Holographic Displays

Angle-dependent next-generation displays have potential applications in 3D stereoscopic and head-mounted displays, image combiners, and encryption for augmented reality (AR) and security. Metasurfaces enable such exceptional functionalities with groundbreaking achievements in efficient displays over the past decades. However, limitations in angular dispersion control make them unfit for numerous nanophotonic applications. Here, we propose a spin-selective angle-dependent all-dielectric metasurface with a unique design strategy to manifest distinct phase information at different incident angles of light. As a proof of concept, the phase masks of two images are encoded into the metasurface and projected at the desired focal plane under different angles of left circularly polarized (LCP) light. Specifically, the proposed multifunctional metasurface generates two distinct holographic images under LCP illumination at angles of +35 and -35°. The presented holographic displays may provide a feasible route toward multifunctional meta-devices for potential AR displays, encrypted imaging, and information storage applications.

Controllable hydrophilic/superhydrophobic patterned coatings for optical information encryption/decryption based on water-triggered opaque to translucent transition

Anti-counterfeiting technologies are crucial for securing the authenticity and proof of commodities, in which the optical information encryption/decryption has attracted extensive attention for its overriding advantages of visibility and convenience. Inspired by the unique transparency transformation phenomenon of Diphylleia grayi petals, a controllable hydrophilic/superhydrophobic patterned coating with water-triggered opaque to translucent transition is proposed through the construction of a superhydrophobic coating, subsequent air plasma etching under a mask, and final hydrophilic modification to introduce stable invisible patterns. The superhydrophobic region exhibits great water repellency with a water contact angle (WCA) at 157°, while the hydrophilic region quickly absorbs water with a WCA at 61°. The patterned coating presents an opaque state for the serious light scattering induced by the rough microstructure and large refractive index difference between the coating and air, while the hydrophilic patterns on the coating transform to translucent after water infiltration for the reduced roughness and close refractive indexes of the coating and water. The information revealing is rapid and reversible, and demonstrates heat and long-term stability and great reusability. The findings conceivably stand out as a new methodology to fabricate controllable superwettable coatings with optical information encryption/decryption capability for application in anti-counterfeiting.

Electron Oscillation-Induced Splitting Electroluminescence from Nano-LEDs for Device-Level Encryption

Data security is a major concern in digital age, which generally relies on algorithm-based mathematical encryption. Recently, encryption techniques based on physical principles are emerging and being developed, leading to the new generation of encryption moving from mathematics to the intersection of mathematics and physics. Here, device-level encryption with ideal security is ingeniously achieved using modulation of the electron-hole radiative recombination in a GaN-light-emitting diode (LED). When a nano-LED is driven in the non-carrier injection mode, the oscillation of confined electrons can split what should be a single light pulse into multiple pulses. The morphology (amplitude, shape, and pulse number) of those history-dependent multiple pulses that act as carriers for transmitted digital information depends highly on the parameters of the driving signals, which makes those signals mathematically uncrackable and can increase the volume and security of transmitted information. Moreover, a hardware and software platform are designed to demonstrate the encrypted data transmission based on the device-level encryption method, enabling recognition of the entire ASCII code table. The device-level encryption based on splitting electroluminescence provides an encryption method during the conversion process of digital signals to optical signals and can improve the security of LED-based communication.

Polarization Reversal of Group IV-VI Semiconductors with Pucker-Like Structure: Mechanism Dissecting and Function Demonstration

Polarization imaging presents advantages in capturing spatial, spectral, and polarization information across various spectral bands. It can improve the perceptual ability of image sensors and has garnered more applications. Despite its potential, challenges persist in identifying band information and implementing image enhancement using polarization imaging. These challenges often necessitate integrating spectrometers or other components, resulting in increased complexities within image processing systems and hindering device miniaturization trends. Here, the characteristics of anisotropic absorption reversal are systematically elucidated in pucker-like group IV-VI semiconductors MX (M = Ge, Sn; X = S, Se) through theoretical predictions and experimental validations. Additionally, the fundamental mechanisms behind anisotropy reversal in different bands are also explored. The photodetector is constructed by utilizing MX as a light-absorbing layer, harnessing polarization-sensitive photoresponse for virtual imaging. The results indicate that the utilization of polarization reversal photodetectors holds advantages in achieving further multifunctional integration within the device structure while simplifying its configuration, including band information identification and image enhancement. This study provides a comprehensive analysis of polarization reversal mechanisms and presents a promising and reliable approach for achieving dual-band image band identification and image enhancement without additional auxiliary components.

Polarization-encoded optical secret sharing based on a dielectric metasurface incorporating near-field nanoprinting and far-field holography

Metasurface encryption with high concealment and resolution is promising for information security. To improve the encryption security, a polarization-encoded secret sharing scheme based on dielectric metasurface by combining the secret sharing method with nanoprinting and holography is proposed. In this encryption scheme, the secret image is split into camouflaged holograms of different polarization channels and shares a total of 24-1 encryption channels. Benefiting from the secret sharing mechanism, the secret image cannot be obtained by decoding the hologram with a single shared key. Specifically, the secret hologram of a specific channel in the far field can be obtained by specifying the optical key, acquiring the near-field nanoprinting image to determine the combination order for the shared key, and decoding using multiple shared keys. The secret sharing encryption scheme can not only enhance the security level of metasurface encryption, but also increase the number of information channels by predefining camouflage information. We believe that it has important potential applications in large-capacity optical encryption and information storage.

An ultrahigh-fidelity 3D holographic display using scattering to homogenize the angular spectrum

A three-dimensional (3D) holographic display (3DHD) can preserve all the volumetric information about an object. However, the poor fidelity of 3DHD constrains its applications. Here, we present an ultrahigh-fidelity 3D holographic display that uses scattering for homogenization of angular spectrum. A scattering medium randomizes the incident photons and homogenizes the angular spectrum distribution. The redistributed field is recorded by a photopolymer film with numerous modulation modes and a half-wavelength scale pixel size. We have experimentally improved the contrast of a focal spot to 6 × 106 and tightened its spatial resolution to 0.5 micrometers, respectively ~300 and 4.4 times better than digital approaches. By exploiting the spatial multiplexing ability of the photopolymer and the transmission channel selection capability of the scattering medium, we have realized a dynamic holographic display of 3D spirals consisting of 20 foci across 1 millimeter × 1 millimeter × 26 millimeters with uniform intensity.

Revisiting the Design Strategies for Metasurfaces: Fundamental Physics, Optimization, and Beyond

Over the last two decades, the capabilities of metasurfaces in light modulation with subwavelength thickness have been proven, and metasurfaces are expected to miniaturize conventional optical components and add various functionalities. Herein, various metasurface design strategies are reviewed thoroughly. First, the scalar diffraction theory is revisited to provide the basic principle of light propagation. Then, widely used design methods based on the unit-cell approach are discussed. The methods include a set of simplified steps, including the phase-map retrieval and meta-atom unit-cell design. Then, recently emerging metasurfaces that may not be accurately designed using unit-cell approach are introduced. Unconventional metasurfaces are examined where the conventional design methods fail and finally potential design methods for such metasurfaces are discussed.

Continuous-Spectrum-Polarization Recombinant Optical Encryption with a Dielectric Metasurface

The Jones matrix, with eight degrees of freedom (DoFs), provides a general mathematical framework for the multifunctional design of metasurfaces. Theoretically, the maximum eight DoFs can be further extended in the spectrum dimension to endow unique encryption capabilities. However, the topology and intrinsic spectral responses of meta-atoms constrains the continuous engineering of polarization evolution over wavelength dimension. In this work, a forward evolution strategy to quickly establish the mapping relationships between the solutions of the dispersion Jones matrix and the spectral responses of meta-atoms is reported. Based on the eigenvector transformation method, arbitrary conjugate polarization channels over the continuous-spectrum dimension are successfully reconstructed. As a proof-of-concept, a silicon metadevice is demonstrated for optical information encryption transmission. Remarkably, the arbitrary combination forms of polarization and wavelength dimension increase the information capacity (210 ), and the measured polarization contrasts of the conjugate polarization conversion are >94% in the entire wavelength range (3-4 µm). It is believed that the proposed approach will benefit secure optical and quantum information technologies.

Dielectric diatomic metasurface-assisted versatile bifunctional polarization conversions and incidence-polarization-secured meta-image

Dielectric metasurface empowering efficient light polarization control at the nanoscale, has recently garnered tremendous research interests in the field of high-resolution image encryption and display, particularly at low-loss wavelengths in the visible band. Nevertheless, due to the single fixed polarization conversion function, the image (either positive or negative image) can always be decrypted in a host-uncontrollable manner as long as the user applies an analyzer to select the polarization component of the output light. Here, we resort to half-waveplate- and quarter-waveplate-like silicon nanopillars to form a metamolecule of a dielectric diatomic metasurface, which can yield versatile linearly polarized (LP) and circularly polarized (CP) light upon orthogonally linear-polarized incidences, providing new degrees of freedom for image display and encryption. We show both theoretically and numerically that versatile different paired LP and CP combinations could be achieved by simply adjusting the orientation angles of the two nanopillars. The bifunctional polarization conversion functions make possible that a meta-image can only be seen when incident light is linearly polarized at a specific polarization angle, whereas no image can be discerned for the orthogonal polarization incidence case, indicating the realization of incidence-polarization secured meta-image. This salient feature holds for all individual metamolecules, reaching a remarkable image resolution of 52,916 dots per inch. By fully exploiting all polarization conversions of four designed metamolecules, three-level incidence polarization-secured meta-image can also be expected.

Dual-wavelength UV-visible metalens for multispectral photoacoustic microscopy: A simulation study

Photoacoustic microscopy is advancing with research on utilizing ultraviolet and visible light. Dual-wavelength approaches are sought for observing DNA/RNA- and vascular-related disorders. However, the availability of high numerical aperture lenses covering both ultraviolet and visible wavelengths is severely limited due to challenges such as chromatic aberration in the optics. Herein, we present a groundbreaking proposal as a pioneering simulation study for incorporating multilayer metalenses into ultraviolet-visible photoacoustic microscopy. The proposed metalens has a thickness of 1.4 µm and high numerical aperture of 0.8. By arranging cylindrical hafnium oxide nanopillars, we design an achromatic transmissive lens for 266 and 532 nm wavelengths. The metalens achieves a diffraction-limited focal spot, surpassing commercially available objective lenses. Through three-dimensional photoacoustic simulation, we demonstrate high-resolution imaging with superior endogenous contrast of targets with ultraviolet and visible optical absorption bands. This metalens will open new possibilities for downsized multispectral photoacoustic microscopy in clinical and preclinical applications.

Bright-Field and Edge-Enhanced Imaging Using an Electrically Tunable Dual-Mode Metalens

The imaging of microscopic biological samples faces numerous difficulties due to their small feature sizes and low-amplitude contrast. Metalenses have shown great promise in bioimaging as they have access to the complete complex information, which, alongside their extremely small and compact footprint and potential to integrate multiple functionalities into a single device, allow for miniaturized microscopy with exceptional features. Here, we design and experimentally realize a dual-mode metalens integrated with a liquid crystal cell that can be electrically switched between bright-field and edge-enhanced imaging on the millisecond scale. We combine the concepts of geometric and propagation phase to design the dual-mode metalens and physically encode the required phase profiles using hydrogenated amorphous silicon for operation at visible wavelengths. The two distinct metalens phase profiles include (1) a conventional hyperbolic metalens for bright-field imaging and (2) a spiral metalens with a topological charge of +1 for edge-enhanced imaging. We demonstrate the focusing and vortex generation ability of the metalens under different states of circular polarization and prove its use for biological imaging. This work proves a method for in vivo observation and monitoring of the cell response and drug screening within a compact form factor.

Integrated metasurfaces for re-envisioning a near-future disruptive optical platform

Metasurfaces have been continuously garnering attention in both scientific and industrial fields, owing to their unprecedented wavefront manipulation capabilities using arranged subwavelength artificial structures. To date, research has mainly focused on the full control of electromagnetic characteristics, including polarization, phase, amplitude, and even frequencies. Consequently, versatile possibilities of electromagnetic wave control have been achieved, yielding practical optical components such as metalenses, beam-steerers, metaholograms, and sensors. Current research is now focused on integrating the aforementioned metasurfaces with other standard optical components (e.g., light-emitting diodes, charged-coupled devices, micro-electro-mechanical systems, liquid crystals, heaters, refractive optical elements, planar waveguides, optical fibers, etc.) for commercialization with miniaturization trends of optical devices. Herein, this review describes and classifies metasurface-integrated optical components, and subsequently discusses their promising applications with metasurface-integrated optical platforms including those of augmented/virtual reality, light detection and ranging, and sensors. In conclusion, this review presents several challenges and prospects that are prevalent in the field in order to accelerate the commercialization of metasurfaces-integrated optical platforms.

Ultra-broadband holography in visible and infrared regions with full-polarization nondispersive response

Holography is promising to fully record and reconstruct the fundamental properties of light, while the limitations of working bandwidth, allowed polarization states, and dispersive response impede further advances in the integration level and functionality. Here, we propose an ultra-broadband holography based on twisted nematic liquid crystals (TNLCs), which can efficiently work in both the visible and infrared regions with a working spectrum of over 1000 nm. The underlying physics is that the electric field vector of light through TNLCs can be parallelly manipulated in the broad spectral range, thus enabling to build the ultra-broadband TNLC hologram by dynamic photopatterning. Furthermore, by introducing a simple nematic liquid crystal (NLC) element, the cascaded device allows for an excellent nondispersive polarization-maintaining performance that can adapt to full-polarization incidence. We expect our proposed methodology of holography may inspire new avenues for usages in polarization imaging, augmented/virtual reality display, and optical encryption.

Spin-isolated ultraviolet-visible dynamic meta-holographic displays with liquid crystal modulators

Wearable displays or head-mounted displays (HMDs) have the ability to create a virtual image in the field of view of one or both eyes. Such displays constitute the main platform for numerous virtual reality (VR)- and augmented reality (AR)-based applications. Meta-holographic displays integrated with AR technology have potential applications in the advertising, media, and healthcare sectors. In the previous decade, dielectric metasurfaces emerged as a suitable choice for designing compact devices for highly efficient displays. However, the small conversion efficiency, narrow bandwidth, and costly fabrication procedures limit the device's functionalities. Here, we proposed a spin-isolated dielectric multi-functional metasurface operating at broadband optical wavelengths with high transmission efficiency in the ultraviolet (UV) and visible (Vis) regimes. The proposed metasurface comprised silicon nitride (Si₃N₄)-based meta-atoms with high bandgap, i.e., ∼ 5.9 eV, and encoded two holographic phase profiles. Previously, the multiple pieces of holographic information incorporated in the metasurfaces using interleaved and layer stacking techniques resulted in noisy and low-efficiency outputs. A single planar metasurface integrated with a liquid crystal was demonstrated numerically and experimentally in the current work to validate the spin-isolated dynamic UV-Vis holographic information at broadband wavelengths. In our opinion, the proposed metasurface can have promising applications in healthcare, optical security encryption, anti-counterfeiting, and UV-Vis nanophotonics.

Chiro-Optoelectronic Encodable Multilevel Thin Film Electronic Elements with Active Bio-Organic Electrolyte Layer

It is suggested that chiral photonic bio-enabled integrated thin-film electronic elements can pave the base for next-generation optoelectronic processing, including quantum coding for encryption as well as integrated multi-level logic circuits. Despite recent advances, thin-film electronics for encryption applications with large-scale reconfigurable and multi-valued logic systems are not reported to date. Herein, highly secure optoelectronic encryption logic elements are demonstrated by facilitating the humidity-sensitive helicoidal organization of chiral nematic phases of cellulose nanocrystals (CNCs) as an active electrolyte layer combined with printed organic semiconducting channels. The ionic-strength controlled tunable photonic band gap facilitates distinguishable and quantized 13-bit electric signals triggered by repetitive changes of humidity, voltage, and the polarization state of the incident light. As a proof-of-concept, the integrated circuits responding to circularly polarized light and humidity are demonstrated as unique physically unclonable functional devices with high-level logic rarely achieved. The convergence between functional nanomaterials and the multi-valued logic thin-film electronic elements can provide optoelectronic counterfeiting, imaging, and information processing with multilevel logic nodes.

Scalable manufacturing of high-index atomic layer-polymer hybrid metasurfaces for metaphotonics in the visible

Metalenses are attractive alternatives to conventional bulky refractive lenses owing to their superior light-modulating performance and sub-micrometre-scale thicknesses; however, limitations in existing fabrication techniques, including high cost, low throughput and small patterning area, have hindered their mass production. Here we demonstrate low-cost and high-throughput mass production of large-aperture visible metalenses using deep-ultraviolet argon fluoride immersion lithography and wafer-scale nanoimprint lithography. Once a 12″ master stamp is imprinted, hundreds of centimetre-scale metalenses can be fabricated using a thinly coated high-index film to enhance light confinement, resulting in a substantial increase in conversion efficiency. As a proof of concept, an ultrathin virtual reality device created with the printed metalens demonstrates its potential towards the scalable manufacturing of metaphotonic devices.

Multicolor and 3D Holography Generated by Inverse-Designed Single-Cell Metasurfaces

Metasurface-generated holography has emerged as a promising route for fully reproducing vivid scenes by manipulating the optical properties of light using ultra-compact devices. However, achieving multiple holographic images using a single metasurface is still difficult due to the capacity limit of a single meta-atom. In this work, an inverse design method based on gradient-descent optimization is presented to encode multiple pieces of holographic information into a single metasurface. The proposed method allows the inverse design of single-cell metasurfaces without the need for complex meta-atom design strategies, facilitating high-throughput fabrication using broadband low-loss materials. By exploiting the proposed design method, both multiplane red-green-blue (RGB) color and three-dimensional (3D) holograms are designed and experimentally demonstrated. Multiplane RGB color holograms with nine distinct holograms are achieved, which demonstrate the state-of-the-art data capacity of a phase-only metasurface. The first experimental demonstration of metasurface-generated 3D holograms with completely independent and distinct images in each plane is also presented. The current research findings provide a viable route for practical metasurface-generated holography by demonstrating the high-density holography produced by a single metasurface. It is expected to ultimately lead to optical storage, display, and full-color imaging applications.

A highly efficient broadband multi-functional metaplate

Due to the considerable potential of ultra-compact and highly integrated meta-optics, multi-functional metasurfaces have attracted great attention. The mergence of nanoimprinting and holography is one of the fascinating study areas for image display and information masking in meta-devices. However, existing methods rely on layering and enclosing, where many resonators combine various functions effectively at the expense of efficiency, design complication, and complex fabrication. To overcome these limitations, a novel technique for a tri-operational metasurface has been suggested by merging PB phase-based helicity-multiplexing and Malus's law of intensity modulation. To the best of our knowledge, this technique resolves the extreme-mapping issue in a single-sized scheme without increasing the complexity of the nanostructures. For proof of concept, a multi-functional metasurface built of single-sized zinc sulfide (ZnS) nanobricks is developed to demonstrate the viability of simultaneous control of near and far-field operations. The proposed metasurface successfully verifies the implementation of a multi-functional design strategy with conventional single-resonator geometry by reproducing two high-fidelity images in the far field and projecting one nanoimprinting image in the near field. This makes the proposed information multiplexing technique a potential candidate for many high-end and multi-fold optical storage, information-switching, and anti-counterfeiting applications.

Nanotransfer-on-Things: From Rigid to Stretchable Nanophotonic Devices

The growing demand for nanophotonic devices has driven the advancement of nanotransfer printing (nTP) technology. Currently, the scope of nTP is limited to certain materials and substrates owing to the temperature, pressure, and chemical bonding requirements. In this study, we developed a universal nTP technique utilizing covalent bonding-based adhesives to improve the adhesion between the target material and substrate. Additionally, the technique employed plasma-based selective etching to weaken the adhesion between the mold and target material, thereby enabling the reliable modulation of the relative adhesion forces, regardless of the material or substrate. The technique was evaluated by printing four optical materials on nine substrates, including rigid, flexible, and stretchable substrates. Finally, its applicability was demonstrated by fabricating a ring hologram, a flexible plasmonic color filter, and extraordinary optical transmission-based strain sensors. The high accuracy and reliability of the proposed nTP method were verified by the performance of nanophotonic devices that closely matched numerical simulation results.

Angular momentum holography via a minimalist metasurface for optical nested encryption

Metasurfaces can perform high-performance multi-functional integration by manipulating the abundant physical dimensions of light, demonstrating great potential in high-capacity information technologies. The orbital angular momentum (OAM) and spin angular momentum (SAM) dimensions have been respectively explored as the independent carrier for information multiplexing. However, fully managing these two intrinsic properties in information multiplexing remains elusive. Here, we propose the concept of angular momentum (AM) holography which can fully synergize these two fundamental dimensions to act as the information carrier, via a single-layer, non-interleaved metasurface. The underlying mechanism relies on independently controlling the two spin eigenstates and arbitrary overlaying them in each operation channel, thereby spatially modulating the resulting waveform at will. As a proof of concept, we demonstrate an AM meta-hologram allowing the reconstruction of two sets of holographic images, i.e., the spin-orbital locked and the spin-superimposed ones. Remarkably, leveraging the designed dual-functional AM meta-hologram, we demonstrate a novel optical nested encryption scheme, which is able to achieve parallel information transmission with ultra-high capacity and security. Our work opens a new avenue for optionally manipulating the AM, holding promising applications in the fields of optical communication, information security and quantum science.

One-step printable platform for high-efficiency metasurfaces down to the deep-ultraviolet region

A single-step printable platform for ultraviolet (UV) metasurfaces is introduced to overcome both the scarcity of low-loss UV materials and manufacturing limitations of high cost and low throughput. By dispersing zirconium dioxide (ZrO₂) nanoparticles in a UV-curable resin, ZrO₂ nanoparticle-embedded-resin (nano-PER) is developed as a printable material which has a high refractive index and low extinction coefficient from near-UV to deep-UV. In ZrO₂ nano-PER, the UV-curable resin enables direct pattern transfer and ZrO₂ nanoparticles increase the refractive index of the composite while maintaining a large bandgap. With this concept, UV metasurfaces can be fabricated in a single step by nanoimprint lithography. As a proof of concept, UV metaholograms operating in near-UV and deep-UV are experimentally demonstrated with vivid and clear holographic images. The proposed method enables repeat and rapid manufacturing of UV metasurfaces, and thus will bring UV metasurfaces more close to real life.

Ultraviolet-Visible Multifunctional Vortex Metaplates by Breaking Conventional Rotational Symmetry

Metasurfaces have shown remarkable potential to manipulate many of light's intrinsic properties, such as phase, amplitude, and polarization. Recent advancements in nanofabrication technologies and persistent efforts from the research community result in the realization of highly efficient, broadband, and multifunctional metasurfaces. Simultaneous control of these characteristics in a single-layered metasurface will be an apparent technological extension. Here, we demonstrate a broadband multifunctional metasurface platform with the unprecedented ability to independently control the phase profile for two orthogonal polarization states of incident light over dual-wavelength spectra (ultraviolet to visible). In this work, multiple single-layered metasurfaces composed of bandgap-engineered silicon nitride nanoantennas are designed, fabricated, and optically characterized to demonstrate broadband multifunctional light manipulation ability, including structured beam generation and meta-interferometer implementation. We envision the presented metasurface platform opening new avenues for broadband multifunctional applications including ultraviolet-visible spectroscopy, spatially modulated illumination microscopy, optical data storage, and information encoding.

Recent Advances in Ultrathin Chiral Metasurfaces by Twisted Stacking

Artificial chiral nanostructures have been subjected to extensive research for their unique chiroptical activities. Planarized chiral films of ultrathin thicknesses are in particular demand for easy on-chip integration and improved energy efficiency as polarization-sensitive metadevices. Recently, controlled twisted stacking of two or more layers of nanomaterials, such as 2D van der Waals materials, ultrathin films, or traditional metasurfaces, at an angle has emerged as a general strategy to introduce optical chirality into achiral solid-state systems. This method endows new degrees of freedom, e.g., the interlayer twist angle, to flexibly engineer and tune the chiroptical responses without having to change the material or the design, thus greatly facilitating the development of multifunctional metamaterials. In this review, recent exciting progress in planar chiral metasurfaces are summarized and discussed from the viewpoints of building blocks, fabrication methods, as well as circular dichroism and modulation thereof in twisted stacked nanostructures. The review further highlights the ever-growing portfolio of applications of these chiral metasurfaces, including polarization conversion, information encryption, chiral sensing, and as an engineering platform for hybrid metadevices. Finally, forward-looking prospects are provided.

Cholesteric liquid crystal-enabled electrically programmable metasurfaces for simultaneous near- and far-field displays

Metasurfaces can enable polarization multiplexing of light so as to carry more information. Specific polarized light necessitates bulk polarizers and waveplates, which significantly increases the form size of metasurface devices. We propose an electrically programmable metasurface enabled by dual-frequency cholesteric liquid crystals (DF-CLCs) for simultaneous near- and far-field displays. Moreover, the integrated device can be electrically programmed to demonstrate 6 different optical images by engineering the DF-CLCs with frequency-modulated voltage pulses. Such programmable metasurfaces are potentially useful for many applications including information storage, displays, anti-counterfeiting, and so on.

Single-Cell-Driven Tri-Channel Encryption Meta-Displays

Multi-functional metasurfaces have attracted great attention due to the significant possibilities to realize highly integrated and ultra-compact meta-devices. Merging nano-printing and holographic information multiplexing is one of the effective ways to achieve multi-functionality, and such a merger can increase the information encoding capacity. However, the current approaches rely on stacking layers and interleaving, where multiple resonators effectively combine different functionalities on the cost of efficiency, design complexity, and challenging fabrication. To address such challenges, a single meta-nanoresonator-based tri-functional metasurface is proposed by combining the geometric phase-based spin-decoupling and Malus's law intensity modulation. The proposed strategy effectively improves information capacity owing to the orientation degeneracy of spin-decoupling rather than layer stacking or super-cell designs. To validate the proposed strategy, a metasurface demonstrating two helicity-dependent holographic outputs is presented in far-field, whereas a continuous nano-printing image is in near-field. It is also employed on CMOS-compatible and cost-effective hydrogen amorphous silicon providing transparent responses for the whole visible band. As a result, the proposed metasurface has high transmission efficiency in the visible regime and verifies the design strategy without adding extra complexities to conventional nano-pillar geometry. Therefore, the proposed metasurface opens new avenues in multi-functional meta-devices design and has promising applications in anti-counterfeiting, optical storage and displays.​.

Immersion-Triggered Active Switch for Spin-Decoupled Meta-Optics Multi-Display

Meta-optics exhibits many promising applications in various fields of optical displays, imaging, and information encryption. However, heading towards next-generation intelligent displays, its broad implementation is critically restricted by the lack of practical active tuning capability. Beyond the conventional electrical/optical/mechanical/thermal tuning methods, liquid immersion has recently emerged as a facile mechanism for active spectral tuning. To further conquer the challenge in achieving active complicated optical-field manipulation, here, an environment-compliant switch for meta-optics multi-display is originally proposed and experimentally realized via the liquid immersion tuning scheme. By designing the spin-decoupled phase array for left-/right-handed circular polarizations, it flexibly presents quad-fold independent-encoded phase distributions for different medium-relevant and polarization-controlled channels, thus enabling four switchable holographic images through immersion tuning. Such a proposed immersion tuning design is quite a straightforward approach for meta-optics holographic displays, enjoying full-spatial usage, design flexibility, and large-scale facile implementation. Overall, the proposed liquid immersion tuning strategy for a meta-optics multi-display would strongly benefit the practical applications in biochemical sensing, environment-adaptive displays, and information encryption.

Highly Efficient Perfect Vortex Beams Generation Based on All-Dielectric Metasurface for Ultraviolet Light

Featuring shorter wavelengths and high photon energy, ultraviolet (UV) light enables many exciting applications including photolithography, sensing, high-resolution imaging, and optical communication. The conventional methods of UV light manipulation through bulky optical components limit their integration in fast-growing on-chip systems. The advent of metasurfaces promised unprecedented control of electromagnetic waves from microwaves to visible spectrums. However, the availability of suitable and lossless dielectric material for the UV domain hindered the realization of highly efficient UV metasurfaces. Here, a bandgap-engineered silicon nitride (Si3N4) material is used as a best-suited candidate for all-dielectric highly efficient UV metasurfaces. To demonstrate the wavefront manipulation capability of the Si3N4 for the UV spectrum, we design and numerically simulate multiple all-dielectric metasurfaces for the perfect vortex beam generation by combing multiple phase profiles into a single device. For different numerical apertures (NA =0.3 and 0.7), it is concluded that the diffracted light from the metasurfaces with different topological charges results in an annular intensity profile with the same ring radius. It is believed that the presented Si3N4 materials and proposed design methodology for PV beam-generating metasurfaces will be applicable in various integrated optical and nanophotonic applications such as information processing, high-resolution spectroscopy, and on-chip optical communication.

Single Pixel Imaging Key for Holographic Encryption Based on Spatial Multiplexing Metasurface

Compared with the traditional holographic technology, metasurface holography is a promising technology due to the large field angle and high spatial resolution. Thanks to the precise control of phase, amplitude, polarization and so on, metasurface holography provides a flexible platform for light modulation, optical encryption and so on. Besides, the process of image reconstruction by single pixel imaging is similar to a form of encoding and decoding, which is realized by calculating the correlation between a series of modulation patterns and their corresponding intensity signals. In this work, an optical encryption scheme is proposed based on spatial multiplexing metasurface, which depends on the combination of holographic technology and single pixel imaging technology. In the encryption scheme, the image transmitted by single pixel imaging based on metasurface is used as the addressing key of holography. Besides, illuminating different positions of the metasurface can generate different holographic reconstructed images, and there is 50% information overlapped between adjacent sub-holograms. This work makes use of the spatial multiplexing property of metasurface, which can complete different functions, paving the way for the application in the field of optical imaging encryption and information security.

Dielectric Contrast Tailoring for Polarized Photosensitivity toward Multiplexing Optical Communications and Dynamic Encrypt Technology

A selective-area oxidation strategy is developed to polarize high-symmetry 2D layered materials (2DLMs). The dichroic ratio of the derived O-WS₂/WS₂ photodetector reaches ∼8, which is competitive among state-of-the-art polarization photodetectors. Finite-different time-domain simulations consolidate that the polarization-sensitive photoresponse is associated with anisotropic spacial confinement, which gives rise to distinct dielectric contrasts for linearly polarized light of various directions and thus the polarization-dependent near-field distribution. Furthermore, selective-area oxidation treatment brings about dual effects, comprising the in situ formation of seamless in-plane WS₂ homojunctions by thickness tailoring and the formation of out-of-plane O-WS₂/WS₂ heterojunctions. As a consequence, the recombination of photocarriers is markedly suppressed, resulting in outstanding photosensitivity with the optimized responsivity, external quantum efficiency, and detectivity of 0.161 A/W, 49.4%, and 1.4 × 10¹¹ Jones for an O-WS₂/WS₂ photodetector in a self-powered mode. A scheme of multiplexing optical communications is revealed by harnessing the intensity and polarization state of light as independent transmission channels. Furthermore, dynamic encryption by leveraging the polarization state as a secret key is proposed. In the end, broad universality is reinforced through the induction of linear dichroism within 2D WSe₂ crystals. On the whole, this study provides an additional perspective on polarization optoelectronics based on 2DLMs.

Single-sized metasurface for simultaneous pseudo-color nanoprinting and holographic image display

Metasurfaces provide a novel platform for multifunctional devices due to their incomparable competence for the manipulation of different optical properties. Recently, many works have emerged to merge distinct functions into a single metasurface, which effectively increase the information density and capacity of meta-devices. In this work, combining the dual-wavelength polarizer and the orientation degeneracy of the Malus law, we further exploit the design degree of freedom of the metasurface, and realize color control and phase manipulation simultaneously with single-sized nanostructures. We experimentally demonstrate our concept by integrating the function of pseudo-color nanoprinting and holographic image display together. Our research can effectively improve the functionalities of metasurface and promote advanced research of multimode displays, information encryption, optical multiplexing, and many other related fields.

Broad-Band Polarization-Insensitive Metasurface Holography with a Single-Phase Map

The remarkable potential of metasurface holography promises revolutionary advancements for imaging, chip-integrated augmented/virtual reality (AR/VR) technology, and flat optical displays. The choice of constituent element geometry constrains many potential applications purveyed through polarization-independent optical response. The limited capabilities and degree of freedoms in commonly used meta-atoms restrict the design flexibility to break the conventional trade-off between polarization-insensitivity and bandwidth. Here, we propose a geometric phase-enabled novel design strategy to break this conventional trade-off. The proposed strategy ensures the realization of broad-band polarization-insensitivity through a simplified design procedure. An identical output wavefront manipulation is achieved by adjusting the phase delay freedom of geometric phase engineering under different incident polarization conditions. For proof of concept, a metahologram device is fabricated by an optimized complementary metal-oxide-semiconductor (CMOS)-compatible material of hydrogenated amorphous silicon (a-Si:H). This metahologram device reproduces the required hologram with high image fidelity and efficiency under different polarization scenarios of white light incidence. Due to the simple design strategy, low computational cost, and easy fabrication, the proposed technique can be an excellent candidate for realizing polarization-insensitive metahologram devices.

Single-Step Fabricable Flexible Metadisplays for Sensitive Chemical/Biomedical Packaging Security and Beyond

Secure packaging and transportation of light-sensitive chemical and biomedical test tubes are crucial for environmental protection and public health. Benefiting from the compact form factor and high efficiency of optical metasurfaces, we propose a broad-band polarization-insensitive flexible metasurface for the security of sensitive packages in the transport industry. We employ both the propagation and the geometric phase of novel TiO₂ resin-based anisotropic nanoresonators to demonstrate a flexible and broad-band polarization-insensitive metasurface in the visible domain. The ultraviolet nanoimprint lithographic technique (UV-NIL) is used to fabricate high-index TiO₂ nanoparticle-embedded-resin (nano-PER) structures that are patterned on a flexible substrate. This novel approach provides swift single-step fabrication without secondary fabrication steps such as deposition and etching. Moreover, replicating and transforming patterns over flexible substrates make the proposed technique highly suitable for large-throughput commercial manufacturing. As the proposed metahologram manifests high transmission efficiency in the visible domain, such flexible metaholographic platforms could find several exciting applications in bendable/curved displays, wearable devices, and holographic labeling for interactive displays.

Thermally-curable nanocomposite printing for the scalable manufacturing of dielectric metasurfaces

Metasurfaces consisting of artificially designed meta-atoms have been popularized recently due to their advantages of amplitude and phase of light control. However, the electron beam lithography method for metasurface fabrication has high cost and low throughput, which results in a limitation for the fabrication of metasurfaces. In this study, nanocomposite printing technology is used to fabricate high-efficiency metasurfaces with low cost. To demonstrate the efficiency of the proposed fabrication method, a metahologram is designed and fabricated using a nanocomposite. The metahologram exhibits conversion efficiencies of 48% and 35% at wavelengths of 532 and 635 nm, respectively. The nanocomposite is composed of polymers with nanoparticles, so durability tests are also performed to evaluate the effects of temperature and humidity on the metasurfaces. The test verifies that at temperatures below the glass transition temperature of the base resin, the nanostructures do not collapse, so the efficiency of the metasurfaces remains almost the same. The surrounding humidity does not affect the nanostructures at all. Hence, the durability of the nanocomposite metasurfaces can be further enhanced by replacing the base resin, and this nanocomposite printing method will facilitate practical metasurface use at low cost.

Nanostructured chromium-based broadband absorbers and emitters to realize thermally stable solar thermophotovoltaic systems

The efficiency of traditional solar cells is constrained due to the Shockley-Queisser limit, to circumvent this theoretical limit, the concept of solar thermophotovoltaics (STPVs) has been introduced. The typical design of an STPV system consists of a wideband absorber with its front side facing the sun. The back of this absorber is physically attached to the back of a selective emitter facing a low-bandgap photovoltaic (PV) cell. We demonstrate an STPV system consisting of a wideband absorber and emitter pair achieving a high absorptance of solar radiation within the range of 400-1500 nm (covering the visible and infrared regions), whereas the emitter achieves an emittance of >95% at a wavelength of 2.3 μm. This wavelength corresponds to the bandgap energy of InGaAsSb (0.54 eV), which is the targeted PV cell technology for our STPV system design. The material used for both the absorber and the emitter is chromium due to its high melting temperature of 2200 K. An absorber and emitter pair is also fabricated and the measured results are in agreement with the simulated results. The design achieves an overall solar-to-electrical simulated efficiency of 21% at a moderate temperature of 1573 K with a solar concentration of 3000 suns. Furthermore, an efficiency of 15% can be achieved at a low temperature of 873 K with a solar concentration of 500 suns. The designs are also insensitive to polarization and show negligible degradation in solar absorptance and thermal emittance with a change in the angle of incidence.

Liquid crystal-powered Mie resonators for electrically tunable photorealistic color gradients and dark blacks

Taking inspiration from beautiful colors in nature, structural colors produced from nanostructured metasurfaces have shown great promise as a platform for bright, highly saturated, and high-resolution colors. Both plasmonic and dielectric materials have been employed to produce static colors that fulfil the required criteria for high-performance color printing, however, for practical applications in dynamic situations, a form of tunability is desirable. Combinations of the additive color palette of red, green, and blue enable the expression of further colors beyond the three primary colors, while the simultaneous intensity modulation allows access to the full color gamut. Here, we demonstrate an electrically tunable metasurface that can represent saturated red, green, and blue pixels that can be dynamically and continuously controlled between on and off states using liquid crystals. We use this to experimentally realize ultrahigh-resolution color printing, active multicolor cryptographic applications, and tunable pixels toward high-performance full-color reflective displays.