A Review on MXene Synthesis, Stability, and Photocatalytic Applications

Revealing the potential of quantum dot nanomaterials in photocatalytic applications

The practical fabrication of quantum dot materials, including their size, shape, form, crystallinity, and chemical composition, is a crucial research area in the field of photocatalysis. Quantum dots can effectively enhance the separation and transfer of carriers and expand the utilization of visible light when used in heterogeneous junctions with wide bandgap semiconductors. Additionally, they exhibit excellent photosensitivity properties that significantly improve the material's capacity for absorbing visible light. This paper systematically presents an overview of the outstanding optical properties exhibited by quantum dots based on both domestic and international research on photocatalytic materials. Furthermore, it summarizes the research content, characteristics, and current challenges associated with common types of quantum dots and photocatalytic materials while highlighting their applications in environmental remediation and energy production. Finally, this paper anticipates future trends in the development of photocatalysis by providing valuable insights into more efficient semiconductor materials that are cost-effective yet environmentally friendly.

Novel BiOI/LaOXI〈IX〉 heterojunction with enhanced visible-light driven photocatalytic performance: unveiling the mechanism of interlayer electron transition

Improving visible light absorption plays an important role in the utilization of solar power for photocatalysis. Using first-principles calculations within the HSE06 functional, we propose that the semiconductor heterojunction BiOI/LaOXI〈IX〉 extends the optical absorption to the near-infrared range, boosts the absorption coefficient from 1.28 × 105 cm-1 to above 2.20 × 105 cm-1 in the visible light range, and increases the conversion efficiency of solar power up to 9.48%. The enhanced optical absorption derives from the significant interlayer transition and excitonic effect which benefit from polarized LaOXI with a flat band in the highest valence band (VB). In BiOI/LaOClI〈ICl 〉, the electrostatic potential difference (ΔΦ) modifies the band edge positions to meet the requirements for photocatalytic overall water splitting, while the polarized electric field (Ep) accelerates the separation of photogenerated carriers and regulates the overpotentials of photogenerated carriers following a direct Z-scheme strategy. In addition, BiOI/LaOXI〈IX〉 is dynamically and thermodynamically stable. Furthermore, only a low external potential is needed to drive the redox reaction. Our theoretical results suggest that BiOI/LaOXI〈IX〉 could be a potential photocatalyst for overall water splitting with enhanced visible light absorption.

Enrichment and detection of polycyclic aromatic hydrocarbon in tea and coffee using phenyl-functionalized NiFe2O4@Ti3C2TX based magnetic solid-phase extraction

Polycyclic aromatic hydrocarbons (PAHs) are commonly found in various environmental matrices and have received significant attention due to their toxic effects on ecosystems and environmental health. In this study, a specific magnetic composite material derived from MXene, known as phenyl-functionalized NiFe2O4@Ti3C2TX, was designed and synthesized using a simple method. This composite material was used to develop an effective magnetic solid-phase extraction (MSPE) method for enriching trace polycyclic aromatic hydrocarbons (PAHs) in tea and coffee samples. The eluted PAHs were analyzed via gas chromatography-tandem mass spectrometry. Under optimal conditions, this method exhibited excellent linear relationships for 16 PAHs within the ranges of 0.001-25 and 0.0005-25 μg/L, with correlation coefficients exceeding 0.9979. The limits of detection for the target PAHs ranged from 0.1 to 0.3 ng/L. The effectiveness of the proposed method was evaluated by analyzing tea and coffee samples, and the satisfactory spiked recoveries of PAHs ranged from 84.5% to 112.6%.

MXene-based composites in smart wound healing and dressings

MXenes, a class of two-dimensional materials, exhibit considerable potential in wound healing and dressing applications due to their distinctive attributes, including biocompatibility, expansive specific surface area, hydrophilicity, excellent electrical conductivity, unique mechanical properties, facile surface functionalization, and tunable band gaps. These materials serve as a foundation for the development of advanced wound healing materials, offering multifunctional nanoplatforms with theranostic capabilities. Key advantages of MXene-based materials in wound healing and dressings encompass potent antibacterial properties, hemostatic potential, pro-proliferative attributes, photothermal effects, and facilitation of cell growth. So far, different types of MXene-based materials have been introduced with improved features for wound healing and dressing applications. This review covers the recent advancements in MXene-based wound healing and dressings, with a focus on their contributions to tissue regeneration, infection control, anti-inflammation, photothermal effects, and targeted therapeutic delivery. We also discussed the constraints and prospects for the future application of these nanocomposites in the context of wound healing/dressings.

Enhancing Performance of Organic Pollutant Degradation via Building Heterojunctions with ZnO Nanowires and Na Doped Conjugated 2,4,6-Triaminopyrimidin-g-C3N4

Organic pollutants were one of the main sources of environmental pollutants. The degradation of organic pollutants through photocatalytic technology was one of the effective solutions. By preparing zinc oxide(ZnO) nanowires modified with sodium-doped conjugated 2,4,6-triaminopyrimidin-g-C3N4 (NaTCN) heterojunction (ZnO/NaTCN), the photocatalytic performance of NaTCN modified with different ratios of ZnO was systematically studied. The photocatalytic performance was studied through the degradation performance of methyl blue (MB) dye. The results showed that 22.5 wt% ZnO/NaTCN had the best degradation effect on MB dye. The degradation rate of MB reached 98.54% in 70 min. After three cycles, it shows good cycling stability (degradation rate is 96.99%) for dye degradation. It was found that there are two types of active species: ·OH and h+, of which h+ is the main active species produced by photocatalytic degradation of dyes. The excellent degradation performance was attributed to the fact that ZnO facilitated the extraction and transport of photogenerated carriers. The doping of sodium facilitated charge transfer. The NaTCN conjugated system promoted the extraction and transfer of photogenerated carriers. It provided guidance for designing efficient composite catalysts for use in other renewable energy fields.

Designing a Se-intercalated MOF/MXene-derived nanoarchitecture for advancing the performance and durability of lithium-selenium batteries

Lithium-selenium batteries have emerged as a promising alternative to lithium-sulfur batteries due to their high electrical conductivity and comparable volume capacity. However, challenges such as the shuttle effect of polyselenides and high-volume fluctuations hinder their practical implementation. To address these issues, we propose synthesizing Fe-CNT/TiO2 catalyst through high-temperature sintering of an amalgamated nanoarchitecture of carbon nanotubes decorated metal-organic framework (MOF) and MXene, optimized for efficient selenium hosting, leveraging the distinctive physicochemical properties. The catalytic features inherent in the porous Se@Fe-CNT/TiO2 nanoarchitecture were instrumental in promoting efficient ion and electron transport, and lithium-polyselenide kinetics, while its inherent porosity could play a crucial role in inhibiting electrode stress during cycling. This nanoarchitecture exhibits remarkable battery performance, retaining 99.7% of theoretical capacity after 425 cycles at 0.5 C rate and demonstrating 95.8% capacity retention after 2000 cycles at 1 C rate, with ∼100% Coulombic efficiency. Additionally, the Se@Fe-CNT/TiO2 electrode exhibited an impressive recovery of 297.5 mAh/g (97.9%) capacity after undergoing 450 cycles at a charging rate of 10 C and a discharging rate of 1 C. This synergistic integration of MOF- and MXene-derived materials unveils new possibilities for high-performance and durable LSeBs, thus advancing electrochemical energy storage systems.

Simultaneous Efficient Photocatalytic Hydrogen Evolution and Degradation of Dye Wastewater without Cocatalysts and Sacrificial Agents Based on g-C3N5 and Hybridized Ni-MOF Derivative-CdS-DETA

Inspired by energy conversion and waste reuse, hybridized Ni-MOF derivative-CdS-DETA/g-C3N5, a type-II heterojunction photocatalyst, is synthesized by a hydrothermal method for simultaneous and highly efficient photocatalytic degradation and hydrogen evolution in dye wastewater. Without the addition of cocatalysts and sacrificial agents, the optimal MOF-CD(2)/CN5 (i.e. Ni-MOF derivative-CdS-DETA (20 wt.%)/g-C3N5) exhibit good bifunctional catalytic activity, with a H2 evolution rate of 2974.4 µmol g-1 h-1 during the degradation of rhodamine B (RhB), and a removal rate of 99.97% for RhB. In the process of H2-evolution-only, triethanolamine is used as a sacrificial agent, exhibiting a high H2 evolution rate (19663.1 µmol g-1 h-1) in the absence of a cocatalyst, and outperforming most similar related materials (such as MOF/g-C3N5, MOF-CdS, CdS/g-C3N5). With the help of type-II heterojunction, holes are scavenged for the oxidative degradation of RhB, and electrons are used in the decomposition of water for H2 evolution during illumination. This work opens a new path for photocatalysts with dual functions of simultaneous efficient degradation and hydrogen evolution.

Rational Design of Flexible, Self-Supporting, and Binder-Free Prussian White/KetjenBlack/MXene Composite Electrode for Sodium-Ion Batteries with Boosted Electrochemical Performance

Due to their cost-effectiveness, abundant resources, and suitable working potential, sodium-ion batteries are anticipated to establish themselves as a leading technology in the realm of grid energy storage. However, sodium-ion batteries still encounter challenges, including issues related to low energy density and constrained cycling performance. In this study, a self-supported electrode composed of Prussian white/KetjenBlack/MXene (TK-PW) is proposed. In the TK-PW electrode, the MXene layer is coated with Prussian white nanoparticles and KetjenBlack with high conductivity, which is conducive to rapid Na+ dynamics and effectively alleviates the expansion of the electrode. Notably, the electrode preparation method is uncomplicated and economically efficient, enabling large-scale production. Electrochemical testing demonstrates that the TK-PW electrode retains 74.9% of capacity after 200 cycles, with a discharge capacity of 69.7 mAh·g-1 at 1000 mA·g-1. Furthermore, a full cell is constructed, employing a hard carbon anode and TK-PW cathode to validate the practical application potential of the TK-PW electrode.

Advances in MXene surface functionalization modification strategies for CO2 reduction

MXenes, 2D transition metal carbides and nitrides, show great potential in electrocatalytic CO2 reduction reaction (ECO2RR) applications owing to their tunable structure, abundant surface functional groups, large specific surface area and remarkable conductivity. However, the ECO2RR has a complex pathway involving various reaction intermediates. The reaction process yields various products alongside a competitive electrolytic water-splitting reaction. These factors limit the application of MXenes in ECO2RRs. Therefore, this review begins by examining the functionalized modification of MXenes to enhance their catalytic activity and stability via the regulation of interactions between carriers and the catalytic centre. The review firstly covers the synthesis methods and characterisation techniques for functionalized MXenes reported in recent years. Secondly, it presents the methods applied for the functionalized modification of carriers through surface loading of single atoms, clusters, and nanoparticles and construction of composites. These methods regulate the stability, active sites, and metal-carrier electronic interactions. Finally, the article discusses the challenges, opportunities, pressing issues, and future prospects related to MXene-based electrocatalysts.

Research Progress on Ti3C2Tx-Based Composite Materials in Antibacterial Field

The integration of two-dimensional Ti3C2Tx nanosheets and other materials offers broader application options in the antibacterial field. Ti3C2Tx-based composites demonstrate synergistic physical, chemical, and photodynamic antibacterial activity. In this review, we aim to explore the potential of Ti3C2Tx-based composites in the fabrication of an antibiotic-free antibacterial agent with a focus on their systematic classification, manufacturing technology, and application potential. We investigate various components of Ti3C2Tx-based composites, such as metals, metal oxides, metal sulfides, organic frameworks, photosensitizers, etc. We also summarize the fabrication techniques used for preparing Ti3C2Tx-based composites, including solution mixing, chemical synthesis, layer-by-layer self-assembly, electrostatic assembly, and three-dimensional (3D) printing. The most recent developments in antibacterial application are also thoroughly discussed, with special attention to the medical, water treatment, food preservation, flexible textile, and industrial sectors. Ultimately, the future directions and opportunities are delineated, underscoring the focus of further research, such as elucidating microscopic mechanisms, achieving a balance between biocompatibility and antibacterial efficiency, and investigating effective, eco-friendly synthesis techniques combined with intelligent technology. A survey of the literature provides a comprehensive overview of the state-of-the-art developments in Ti3C2Tx-based composites and their potential applications in various fields. This comprehensive review covers the variety, preparation methods, and applications of Ti3C2Tx-based composites, drawing upon a total of 171 English-language references. Notably, 155 of these references are from the past five years, indicating significant recent progress and interest in this research area.

Emerging 2D Nanomaterials-Integrated Hydrogels: Advancements in Designing Theragenerative Materials for Bone Regeneration and Disease Therapy

This review highlights recent advancements in the synthesis, processing, properties, and applications of 2D-material integrated hydrogels, with a focus on their performance in bone-related applications. Various synthesis methods and types of 2D nanomaterials, including graphene, graphene oxide, transition metal dichalcogenides, black phosphorus, and MXene are discussed, along with strategies for their incorporation into hydrogel matrices. These composite hydrogels exhibit tunable mechanical properties, high surface area, strong near-infrared (NIR) photon absorption and controlled release capabilities, making them suitable for a range of regeneration and therapeutic applications. In cancer therapy, 2D-material-based hydrogels show promise for photothermal and photodynamic therapies, and drug delivery (chemotherapy). The photothermal properties of these materials enable selective tumor ablation upon NIR irradiation, while their high drug-loading capacity facilitates targeted and controlled release of chemotherapeutic agents. Additionally, 2D-materials -infused hydrogels exhibit potent antibacterial activity, making them effective against multidrug-resistant infections and disruption of biofilm generated on implant surface. Moreover, their synergistic therapy approach combines multiple treatment modalities such as photothermal, chemo, and immunotherapy to enhance therapeutic outcomes. In bio-imaging, these materials serve as versatile contrast agents and imaging probes, enabling their real-time monitoring during tumor imaging. Furthermore, in bone regeneration, most 2D-materials incorporated hydrogels promote osteogenesis and tissue regeneration, offering potential solutions for bone defects repair. Overall, the integration of 2D materials into hydrogels presents a promising platform for developing multifunctional theragenerative biomaterials.

CO2 Photoreduction over Semiconducting 2D Materials with Supported Single Atoms: Recent Progress and Challenges

In the face of the growing energy crisis and environmental challenges, substantial efforts are now directed toward sustainable clean energy as a replacement for traditional fossil fuels. CO2 photoreduction into value-added chemicals and fuels is widely recognized as a promising approach to mitigate current energy and environmental concerns. Photocatalysts comprising single atoms (SAs) supported on two-dimensional (2D) semiconducting materials (SAs-2DSemi) have emerged as a novel frontier due to the combined merits of SA catalysts and 2D materials. In this study, we review advancements in metal SAs confined on 2DSemi substrates, categorized into four groups: (1) metal oxide-based, (2) g-C3N4-based, (3) emerging, and (4) hybridized 2DSemi, for photocatalytic CO2 conversion over the past few years. With a particular focus on highlighting the distinct advantages of SAs-2DSemi, we delve into the synthesis of state-of-the-art catalysts, their catalytic performances, and mechanistic elucidation facilitated by experimental characterizations and theoretical calculations. Following this, we outline the challenges in this field and offer perspectives on harnessing the potential of SAs-2DSemi as promising photocatalysts. This comprehensive review aims to provide valuable insights for the future development of 2D photocatalytic materials involving SAs for CO2 reduction.

MXene-Mediated Catalytic Redox Reactions for Biomedical Applications

Reactive oxygen species (ROS) play a crucial role in orchestrating a myriad of physiological processes within living systems. With the advent of materdicine, an array of nanomaterials has been intricately engineered to influence the redox equilibrium in biological milieus, thereby pioneering a distinctive therapeutic paradigm predicated on ROS-centric biochemistry. Among these, two-dimensional carbides, nitrides, and carbonitrides, collectively known as MXenes, stand out due to their multi-valent and multi-elemental compositions, large surface area, high conductivity, and pronounced local surface plasmon resonance effects, positioning them as prominent contributors in ROS modulation. This review aims to provide an overview of the advancements in harnessing MXenes for catalytic redox reactions in various biological applications, including tumor, anti-infective, and anti-inflammatory therapies. The emphasis lies on elucidating the therapeutic mechanism of MXenes, involving both pro-oxidation and anti-oxidation processes, underscoring the redox-related therapeutic applications facilitated by self-catalysis, photo-excitation, and sono-excitation properties of MXenes. Furthermore, this review highlights the existing challenges and outlines future development trends in leveraging MXenes for ROS-involving disease treatments, marking a significant step towards the integration of these nanomaterials into clinical practice.

Structural Design for EMI Shielding: From Underlying Mechanisms to Common Pitfalls

Modern human civilization deeply relies on the rapid advancement of cutting-edge electronic systems that have revolutionized communication, education, aviation, and entertainment. However, the electromagnetic interference (EMI) generated by digital systems poses a significant threat to the society, potentially leading to a future crisis. While numerous efforts are made to develop nanotechnological shielding systems to mitigate the detrimental effects of EMI, there is limited focus on creating absorption-dominant shielding solutions. Achieving absorption-dominant EMI shields requires careful structural design engineering, starting from the smallest components and considering the most effective electromagnetic wave attenuating factors. This review offers a comprehensive overview of shielding structures, emphasizing the critical elements of absorption-dominant shielding design, shielding mechanisms, limitations of both traditional and nanotechnological EMI shields, and common misconceptions about the foundational principles of EMI shielding science. This systematic review serves as a scientific guide for designing shielding structures that prioritize absorption, highlighting an often-overlooked aspect of shielding science.

Multi-Interface Engineering of MXenes for Self-Powered Wearable Devices

Self-powered wearable devices with integrated energy supply module and sensitive sensors have significantly blossomed for continuous monitoring of human activity and the surrounding environment in healthcare sectors. The emerging of MXene-based materials has brought research upsurge in the fields of energy and electronics, owing to their excellent electrochemical performance, large surface area, superior mechanical performance, and tunable interfacial properties, where their performance can be further boosted via multi-interface engineering. Herein, a comprehensive review of recent progress in MXenes for self-powered wearable devices is discussed from the aspects of multi-interface engineering. The fundamental properties of MXenes including electronic, mechanical, optical, and thermal characteristics are discussed in detail. Different from previous review works on MXenes, multi-interface engineering of MXenes from termination regulation to surface modification and their impact on the performance of materials and energy storage/conversion devices are summarized. Based on the interfacial manipulation strategies, potential applications of MXene-based self-powered wearable devices are outlined. Finally, proposals and perspectives are provided on the current challenges and future directions in MXene-based self-powered wearable devices.

Recent Advancement in Emerging MXene-Based Photocatalytic Membrane for Revolutionizing Wastewater Treatment

MXene-based photocatalytic membranes provide significant benefits for wastewater treatment by effectively combining membrane separation and photocatalytic degradation processes. MXene represents a pioneering 2D photocatalyst with a variable elemental composition, substantial surface area, abundant surface terminations, and exceptional photoelectric performance, offering significant advantages in producing high-performance photocatalytic membranes. In this review, an in-depth overview of the latest scientific progress in MXene-based photocatalytic membranes is provided. Initially, a brief introduction to the structure and photocatalytic capabilities of MXene is provided, highlighting their pivotal role in promoting the photocatalytic process. Subsequently, in pursuit of the optimal MXene-based photocatalytic membrane, critical factors such as the morphology, hydrophilicity, and stability of MXenes are meticulously taken into account. Various preparation strategies for MXene-based photocatalytic membranes, including blending, vacuum filtration, and dip coating, are also discussed. Furthermore, the application and mechanism of MXene-based photocatalytic membranes in micropollutant removal, oil-water separation, and antibacterial are examined. Lastly, the challenges in the development and practical application of MXene-based photocatalytic membranes, as well as their future research direction are delineated.

Functionalized MXene ink enables environmentally stable printed electronics

Establishing dependable, cost-effective electrical connections is vital for enhancing device performance and shrinking electronic circuits. MXenes, combining excellent electrical conductivity, high breakdown voltage, solution processability, and two-dimensional morphology, are promising candidates for contacts in microelectronics. However, their hydrophilic surfaces, which enable spontaneous environmental degradation and poor dispersion stability in organic solvents, have restricted certain electronic applications. Herein, electrohydrodynamic printing technique is used to fabricate fully solution-processed thin-film transistors with alkylated 3,4-dihydroxy-L-phenylalanine functionalized Ti3C2Tx (AD-MXene) as source, drain, and gate electrodes. The AD-MXene has excellent dispersion stability in ethanol, which is required for electrohydrodynamic printing, and maintains high electrical conductivity. It outperformed conventional vacuum-deposited Au and Al electrodes, providing thin-film transistors with good environmental stability due to its hydrophobicity. Further, thin-film transistors are integrated into logic gates and one-transistor-one-memory cells. This work, unveiling the ligand-functionalized MXenes' potential in printed electrical contacts, promotes environmentally robust MXene-based electronics (MXetronics).

Construction of MoB@LDH heterojunction and its derivates through phase and interface engineering for advanced supercapacitor applications

Layered double hydroxide (LDH) has been attracted widespread attention in supercapacitor due to their unique layered structure and associated advantages. However, the inherent limitations of low electrical conductivity and reaction kinetics rate of LDH restrict its widespread application. Various modification techniques, such as heterojunction formation, phosphorization and introduction of phosphorus vacancies, are employed to modify LDH with the goal of improving the electrochemical performance. Preparation of composite materials using MoB MBene as conductive template and phosphorization are the effective ways for enhancing the electrical conductivity of electrode materials. MoB MBene is prepared using a modified method that combines NaOH etching and a high-temperature hydrothermal process. The presence of phosphorus vacancy is beneficial for enhancing the kinetics rate during electrode reactions. Through the synergistic effect of various modification methods, MP2 demonstrates an optimal electrochemical performance with a superior specific capacitance of 1731.19F/g (238.28 mAh g-1) at 1 A/g. It also demonstrates an impressive rate capacity of 81.28 % at 10 A/g and maintains a satisfactory capacitance retention of 88.14 % after 5000 cycles. In addition, a fabricated MP2//AC ASC device achieves an impressive energy density of 39.91 Wh kg-1 at the power density of 948.25 W kg-1 and demonstrates satisfactory cycling stability of 78.76 % after 5000 cycles. This work presents a comprehensive framework for analyzing the impact of material structure, components, and crystal phases on energy storage performance. It also examines the regulatory impact of different modification methods on energy storage mechanisms.

Charge Trapping in Semiconductor Photocatalysts: A Time- and Space-Domain Perspective

Harnessing solar energy to produce value-added fuels and chemicals through photocatalysis techniques holds promise for establishing a sustainable and environmentally friendly energy economy. The intricate dynamics of photogenerated charge carriers lies at the core of the photocatalysis. The balance between charge trapping and band-edge recombination has a crucial influence on the activity of semiconductor photocatalysts. Consequently, the regulation of traps in photocatalysts becomes the key to optimizing their activities. Nevertheless, our comprehension of charge trapping, compared to that of well-studied charge recombination, remains somewhat limited. This limitation stems from the inherently heterogeneous nature of traps at both temporal and spatial scales, which renders the characterization of charge trapping a formidable challenge. Fortunately, recent advancements in both time-resolved spectroscopy and space-resolved microscopy have paved the way for considerable progress in the investigation and manipulation of charge trapping. In this Perspective, we focus on charge trapping in photocatalysts with the aim of establishing a direct link to their photocatalytic activities. To achieve this, we begin by elucidating the principles of advanced time-resolved spectroscopic techniques such as femtosecond time-resolved transient absorption spectroscopy and space-resolved microscopic methods, such as single-molecule fluorescence microscopy and surface photovoltage microscopy. Additionally, we provide an overview of noteworthy research endeavors dedicated to probing charge trapping using time- and space-resolved techniques. Our attention is then directed toward recent achievements in the manipulation of charge trapping in photocatalysts through defect engineering. Finally, we summarize this Perspective and discuss the future challenges and opportunities that lie ahead in the field.

Electronic Properties of CrB/Co2CO2 Superlattices by Multiple Descriptor-Based Machine Learning Combined with First-Principles

In recent times, newly unveiled 2D materials exhibiting exceptional characteristics, such as MBenes and MXenes, have gained widespread application across diverse domains, encompassing electronic devices, catalysis, energy storage, sensors, and various others. Nonetheless, numerous technical bottlenecks persist in the development of high-performance, structurally flexible, and adjustable electronic device materials. Research investigations have demonstrated that 2D van der Waals superlattices (vdW SLs) structures comprising materials exhibit exceptional electrical, mechanical, and optical properties. In this work, the advantages of both materials are combined and compose the vdW SLs structure of MBenes and MXenes, thus obtaining materials with excellent electronic properties. Furthermore, it integrates machine learning (ML) with first-principles methods to forecast the electrical properties of MBene/MXene superlattice materials. Initially, various configurations of MBene/MXene superlattice materials are explored, revealing that distinct stacking methods exert significant influence on the electronic structure of MBene/MXene materials. Specifically, the BABA-type stacking of CrB (layer A) and Co2CO2 MXene (layer B) is most stable configureation. Subsequently, multiple descriptors of the structure are constructed to predict the density of states  of vdW SLs through the employment of ML techniques. The best model achieves a mean absolute error (MAE) as low as 0.147 eV.

F-free etching and ingenious construction of hydrogel layer-prepared MXene membranes for oily wastewater separation

A strategy for the preparation of hydrogel layer MXene membranes by an F-free method was proposed. It maintained high permeance (2686.1 L m-2 h-1 bar-1) and separation efficiency (99.99%) even after 300 min of emulsion separation. The membrane resisted harsh chemical and microbiological environments and efficiently treated actual oily wastewater.

Au/Ti3C2/g-C3N4 Ternary Composites Boost H2 Evolution Efficiently with Remarkable Long-Term Stability by Synergistic Strategies

The use of novel two-dimensional MXene materials and conventional g-C3N4 photocatalysts to fabricate the composites for hydrogen evolution reaction (HER) has attracted much attention, for which there is plenty of room for the enhancement of hydrogen evolution rates particularly under visible light and photostability. Herein, g-C3N4 was modified by copolymerization of malonamide and melamine and used to fabricate the ternary composites of Au particles and Ti3C2 MXene, and based on the synergistic effect, the composites enhanced the hydrogen evolution rates by 2.1, 99.8, and ∞ times compared with the unmodified g-C3N4 under UV, simulated sunlight, and visible light illumination, respectively. Moreover, the composite exhibited a sustained hydrogen evolution capacity in the cycle test for up to 120 h. Theoretical calculations and experimental results indicated that the hot electrons of Au are injected into the modified g-C3N4 and transferred to Ti3C2 simultaneously along with the photogenerated electrons of the modified g-C3N4 and then further transferred to Au, forming a photogenerated electron transfer channel of Au and modified g-C3N4 → Ti3C2 → Au within the composite. Ti3C2 acts as a bridge for fast separation of photogenerated electrons and holes on Au and modified g-C3N4, playing a key role in the enhanced photocatalytic performance. In addition, the visible light absorption ability of Au also positively contributed to the enhancement of visible light photocatalytic performance by providing hot electrons. Therefore, the selection of suitable cocatalysts for the design of composites is a crucial research direction to improve the photocatalytic performance and photostability of photocatalysts.

Recent advances in two-dimensional nanomaterials for sustainable wearable electronic devices

The widespread adoption of smart terminals has significantly boosted the market potential for wearable electronic devices. Two-dimensional (2D) nanomaterials show great promise for flexible, wearable electronics of next-generation electronic materials and have potential in energy, optoelectronics, and electronics. First, this review focuses on the importance of functionalization/defects in 2D nanomaterials, a discussion of different kinds of 2D materials for wearable devices, and the overall structure-property relationship of 2D materials. Then, in this comprehensive review, we delve into the burgeoning realm of emerging applications for 2D nanomaterial-based flexible wearable electronics, spanning diverse domains such as energy, medical health, and displays. A meticulous exploration is presented, elucidating the intricate processes involved in tailoring material properties for specific applications. Each research direction is dissected, offering insightful perspectives and dialectical evaluations that illuminate future trajectories and inspire fruitful investigations in this rapidly evolving field.

A polarization-sensitive, high on/off ratio and self-powered photodetector based on Nb2CTxand Nd2CTx@MoS2

MXene two-dimensional materials have been widely used in energy storage, catalysis, sensing and other fields, Nb2C as a typical two-dimensional MXene material, its exploration in the field of optoelectronics is still in its infancy, especially Nb2C-based photodetectors are still to be developed. This paper demonstrates that two-dimensional films based on few-layer Nb2C have a photoelectric response in the wavelength range from visible to near-infrared. We have found that the light response performance can be easily adjusted by controlling the thickness of the spin-coated film, and that Nb2C photodetectors show great advantages in terms of wide bandwidth, polarization response, high switching ratio, etc. By adjusting the material concentration and sample thickness, the photocurrent can reach up to 330 nA, the switching ratio can reach 410, and the responsivity can reach 8.3 × 10-4A W-1. In the polarization characteristic test, an extinction ratio of 7.6 can be obtained. By adjusting the content of that doped MoS2quantum dot, the dark current can reach 7.6 × 10-13A, and the switching ratio can reach 3 × 105, which can be increased by 700 times. The above results show that the few-layer Nb2C nanosheets can be used as optoelectronic detectors in the visible to near-infrared bands, which further broadens the application prospects of two-dimensional MXene.

Advancements in MXene-based composites for electronic skins

MXenes are a class of two-dimensional (2D) materials that have gained significant attention in the field of electronic skins (E-skins). MXene-based composites offer several advantages for E-skins, including high electrical conductivity, mechanical flexibility, transparency, and chemical stability. Their mechanical flexibility allows for conformal integration onto various surfaces, enabling the creation of E-skins that can closely mimic human skin. In addition, their high surface area facilitates enhanced sensitivity and responsiveness to external stimuli, making them ideal for sensing applications. Notably, MXene-based composites can be integrated into E-skins to create sensors that can detect various stimuli, such as temperature, pressure, strain, and humidity. These sensors can be used for a wide range of applications, including health monitoring, robotics, and human-machine interfaces. However, challenges related to scalability, integration, and biocompatibility need to be addressed. One important challenge is achieving long-term stability under harsh conditions such as high humidity. MXenes are susceptible to oxidation, which can degrade their electrical and mechanical properties over time. Another crucial challenge is the scalability of MXene synthesis, as large-scale production methods need to be developed to meet the demand for commercial applications. Notably, the integration of MXenes with other components, such as energy storage devices or flexible electronics, requires further developments to ensure compatibility and optimize overall performance. By addressing issues related to material stability, mechanical flexibility, scalability, sensing performance, and power supply, MXene-based E-skins can develop the fields of healthcare monitoring/diagnostics, prosthetics, motion monitoring, wearable electronics, and human-robot interactions. The integration of MXenes with emerging technologies, such as artificial intelligence or internet of things, can unlock new functionalities and applications for E-skins, ranging from healthcare monitoring to virtual reality interfaces. This review aims to examine the challenges, advantages, and limitations of MXenes and their composites in E-skins, while also exploring the future prospects and potential advancements in this field.

A Flexible and Stretchable MXene/Waterborne Polyurethane Composite-Coated Fiber Strain Sensor for Wearable Motion and Healthcare Monitoring

Fiber-based flexible sensors have promising application potential in human motion and healthcare monitoring, owing to their merits of being lightweight, flexible, and easy to process. Now, high-performance elastic fiber-based strain sensors with high sensitivity, a large working range, and excellent durability are in great demand. Herein, we have easily and quickly prepared a highly sensitive and durable fiber-based strain sensor by dip coating a highly stretchable polyurethane (PU) elastic fiber in an MXene/waterborne polyurethane (WPU) dispersion solution. Benefiting from the electrostatic repulsion force between the negatively charged WPU and MXene sheets in the mixed solution, very homogeneous and stable MXene/WPU dispersion was successfully obtained, and the interconnected conducting networks were correspondingly formed in a coated MXene/WPU shell layer, which makes the as-prepared strain sensor exhibit a gauge factor of over 960, a large sensing range of over 90%, and a detection limit as low as 0.5% strain. As elastic fiber and mixed solution have the same polymer constitute, and tight bonding of the MXene/WPU conductive composite on PU fibers was achieved, enabling the as-prepared strain sensor to endure over 2500 stretching-releasing cycles and thus show good durability. Full-scale human motion detection was also performed by the strain sensor, and a body posture monitoring, analysis, and correction prototype system were developed via embedding the fiber-based strain sensors into sweaters, strongly indicating great application prospects in exercise, sports, and healthcare.

Architecture of Vanadium-Based MXene Dysregulating Tumor Redox Homeostasis for Amplified Nanozyme Catalytic/Photothermal Therapy

Taking the significance of the special microenvironment for tumor cell survival into account, disrupting tumor redox homeostasis is highly prospective for improving therapeutic efficacy. Herein, a multifunctional 2D vanadium-based MXene nanoplatform, V4 C3 /atovaquone@bovine albumin (V4 C3 /ATO@BSA, abbreviated as VAB) has been elaborately constructed for ATO-enhanced nanozyme catalytic/photothermal therapy. The redox homeostasis within the tumor cells is eventually disrupted, showing a remarkable anti-tumor effect. The VAB nanoplatform with mixed vanadium valence states can induce a cascade of catalyzed reactions in the tumor microenvironment, generating plenty of reactive oxygen species (ROS) with effective glutathione consumption to amplify oxidative stress. Meanwhile, the stable and strong photothermal effect of VAB under near-infrared irradiation not only causes the necrosis of tumor cells, but also improves its peroxidase-like activity. In addition, the release of ATO can effectively alleviate endogenous oxygen consumption to limit triphosadenine formation and inhibit mitochondrial respiration. As a result, the expression of heat shock proteins is effectively suppressed to overcome thermoresistance and the production of ROS can be further promoted due to mitochondrial injury. Moreover, VAB also presents high photoacoustic and photothermal imaging performances. In brief, the multifunctional nanoplatform can provide ATO-enhanced nanozyme catalytic/photothermal therapy with broadening the biomedical applications of vanadium-based MXene.

3D nanocake-like Au-MXene/Au pallet structure-based label-free electrochemical aptasensor for paraquat determination

3D nanocake-like Au-MXene and Au pallet (Au-MXene/AuP) nanocomposite-modified screen-printed carbon electrodes (SPCEs) were utilized to construct an ultrasensitive label-free electrochemical aptasensor through a self-assembly procedure for trace paraquat (PQ) residue detection. Benefiting from the excellent electrochemical (EC) performances (e.g., high conductivity and large surface area) of Au-MXene nanocomposites and AuP substrate, the developed Apt/Au-MXene/AuP/SPCE-based EC aptasensor displayed excellent specificity and anti-interference ability, good repeatability, and stability. A linear relationship between the log value of the change in current intensity [lg (ΔI)] and the log value of the concentration of PQ [lg (CPQ)] was obtained in the range 0.05-1000 ng/mL. The limit of detection was 0.028 ng/mL, and the sensitivity was 255.5 μA/(μM·cm2). Practical applications in malt and mint samples confirmed the accuracy of the EC aptasensor in complex matrices for PQ detection, providing a universal analytical tool for other trace pesticides in different food samples by simply replacing the corresponding aptamers.

A Synergistic Antibacterial Study of Copper-Doped Polydopamine on Ti3C2Tx Nanosheets with Enhanced Photothermal and Fenton-like Activities

In response to the trend of drug-resistant and super bacteria, the existing single antibacterial methods are not sufficient to kill bacteria, and the development of multifunctional antibacterial nanomaterials is urgent. Our study aims to construct copper-doped polydopamine-coated Ti3C2Tx (CuPDA@Ti3C2Tx) with an enhanced photothermal property and Fenton-like activity. The nanocomposite hydrogel consisting of CuPDA@Ti3C2Tx and alginate can improve the antioxidant activity of two-dimensional MXene nanosheets by coating them with a thin layer of PDA nanofilm. Meanwhile, Cu ions are adsorbed through the coordination of PDA-rich oxygen-containing functional groups and amino groups. Calcium ions were further used to crosslink sodium alginate to obtain antibacterial hydrogel materials with combined chemotherapy and photothermal therapy properties. The photothermal conversion efficiency of CuPDA@Ti3C2Tx is as high as 57.7% and the antibacterial rate of Escherichia coli reaches 96.12%. The photothermal effect leads to oxidative stress in bacteria, increases cell membrane permeability, and a high amount of ROS and copper ions enter the interior of the bacteria, causing protein denaturation and DNA damage, synergistically leading to bacterial death. Our study involves a multifunctional synergistic antibacterial nanodrug platform, which is conducive to the development of high-performance antibacterial agents and provides important research ideas for solving the problem of drug-resistant bacteria.

MAX, MXene, or MX: What Are They and Which One Is Better?

The fast ever-growing interest in transition metal carbonitrides (MXenes) for energy and catalysis is undermined by the undesirable multi-surficial terminations, which severely limit their applications. In contrast, considering the intriguing and tunable electronic structure, rich surface active sites, and high thermal durability, termination-free MXene (MX) hosts a huge possibility for catalysis. As such, recent advances in the evolution from MAX to MXene, and then to MX are overviewed and compared briefly, before concentrating on the unique future of MX in multi-heterogeneous catalysis. This work also looks beyond the fundamental properties of MX and discusses the potential of such materials for applications in multi-electron redox reactions. It is convinced that the potential success of MX in future catalysis is promising. Further extension toward high entropy and single-atom modifications will consolidate the leading position of MX in catalysis.

NiFe-layered double hydroxide/CoP2@MnP heterostructures of clustered flower nanowires on MXene-modified nickel foam for overall water-splitting

Exploiting efficient and economical electrocatalysts is indispensable to promoting the sluggish kinetics of overall water-splitting. Herein, we designed a phosphate reaction and two-step hydrothermal method to construct a 3D porous clustered flower-like heterogeneous structure of NiFe-layered double hydroxide (NiFe) and CoP2@MnP (CMP) grown in-situ on MXene-modified nickel foam (NF) substrate (denoted as NiFe/CMP/MX), with favorable kinetics. Density functional theory calculations (DFT) demonstrate that the self-driven transfer of heterojunction charges causes electron redistribution of the catalyst, and optimizes the electron transfer rate of the active site and the d-band center near the Fermi level, thereby reducing the adsorption energy of H and O reaction intermediates (H*, OH*, OOH*). As expected, the combination of CMP and NiFe with naturally conductive MXene forms a strong chemical and electron synergistic effect, which enables the synthesized NiFe/CMP/MX heterogeneous structure exhibits good activity for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) with a low overpotential of 200 mV and 126 mV at 10 mA cm-2, respectively. Furthermore, the overpotential of 1.58 V is enough to drive a current density of 10 mA cm-2 in a two-electrode configuration, which is better than noble metals (RuO2(+)//Pt/C(-)) (1.68 V).

Facile synthesis of a GO-g-C3N4/BaTiO3 ternary nanocomposites for visible-light-driven photocatalytic degradation of rhodamine B

Photogenerated charge carriers can undergo rapid recombination in conventional photocatalyst systems, reducing their photocatalytic efficiency. To address this bottleneck, a g-C3N4/BaTiO3 (CNB) heterojunction composite was decorated with different mass ratios of graphene oxide (GO) to form a novel visible-light responsive ternary GO-g-C3N4/BaTiO3 (GOCNB) nanocomposite using a facile fabrication method. The GOCNB photocatalyst exhibited significantly higher light absorption and greater charge transfer than CNB, g-C3N4, or BaTiO3. The photodegradation performance of GOCNB was optimized with a 2% mass loading of GO, and it achieved a degradation rate constant of 14.9 × 10-3 min-1 for rhodamine B with an efficiency of 94% within 180 min. The rate constant was 8-fold and 6-fold higher than that of bare BaTiO3 and CNB, respectively. The stronger photocatalytic activity was attributed to the synergistic effect of GO, g-C3N4, and BaTiO3, with g-C3N4 and BaTiO3 promoting charge transfer within a wider visible light range and GO promoting electron mobility and the photocatalyst's adsorption capacity. In particular, the proposed system maintained the spatial separation of photogenerated electron-hole pairs, which is vital for high photocatalytic activity. This study provides new insights into semiconductor-based photocatalytic systems and suggests a route for more environmentally sustainable technologies.

Band alignment type I, II transformations in Hf2CO2/MoS2 heterostructures using biaxial strain, external electric field, and interlayer coupling: a first principal investigation

The transition to neuromorphic devices is relevant to the development of materials capable of providing electronic switching in response to external stimuli. In the present work, the Hf2CO2/MoS2 heterostructure under biaxial strain, interlayer coupling, and an electric field was investigated by first-principles calculations based on density functional theory. We have shown that the influence of lateral deformation as well as the perpendicular external electric field is more significant compared to the influence of external vertical pressure on changes in the heterojunction type of heterostructure. The lateral stretching leads to a type-I and lateral compression results in a type-II heterojunction, and an external electric field also has an effect on heterojunction type. The combination of these impacts can tune the Hf2CO2/MoS2 heterostructure. The current work suggests a compelling way to make type-I and type-II heterostructure types consisting of Hf2CO2 and MoS2 monolayers for new nanodevices in fields like photonics, electronics, optoelectronic and neuromorphic applications.

Ti3C2-MXene/NiO Nanocomposites-Decorated CsPbI3 Perovskite Active Materials under UV-Light Irradiation for the Enhancement of Crystal-Violet Dye Photodegradation

Ti3C2-MXene material, known for its strong electronic conductivity and optical properties, has emerged as a promising alternative to noble metals as a cocatalyst for the development of efficient photocatalysts used in environmental cleanup. In this study, we investigated the photodegradation of crystal-violet (CV) dye when exposed to UV light using a newly developed photocatalyst known as Ti3C2-MXene/NiO nanocomposite-decorated CsPbI3 perovskite, which was synthesized through a hydrothermal method. Our research investigation into the structural, morphological, and optical characteristics of the Ti3C2-MXene/NiO/CsPbI3 composite using techniques such as FTIR, XRD, TEM, SEM-EDS mapping, XPS, UV-Vis, and PL spectroscopy. The photocatalytic efficacy of the Ti3C2-MXene/NiO/CsPbI3 composite was assessed by evaluating its ability to degrade CV dye in an aqueous solution under UV-light irradiation. Remarkably, the Ti3C2-MXene/NiO/CsPbI3 composite displayed a significant improvement in both the degradation rate and stability of CV dye when compared to the Ti3C2-MXene/NiO nanocomposite and CsPbI3 perovskite materials. Furthermore, the UV-visible absorption spectrum of the Ti3C2-MXene/NiO/CsPbI3 composite demonstrated a reduced band gap of 2.41 eV, which is lower than that of Ti3C2-MXene/NiO (3.10 eV) and Ti3C2-MXene (1.60 eV). In practical terms, the Ti3C2-MXene/NiO/CsPbI3 composite achieved an impressive 92.8% degradation of CV dye within 90 min of UV light exposure. We also confirmed the significant role of photogenerated holes and radicals in the CV dye removal process through radical scavenger trapping experiments. Based on our findings, we proposed a plausible photocatalytic mechanism for the Ti3C2-MXene/NiO/CsPbI3 composite. This research may open up new avenues for the development of cost-effective and high-performance MXene-based perovskite photocatalysts, utilizing abundant and sustainable materials for environmental remediation.

Surface-Controlled CdS/Ti3 C2 MXene Schottky Junction for Highly Selective and Active Photocatalytic Dehydrogenation-Reductive Amination

Photocatalytic valorization and selective transformation of biomass-derived platform compounds offer great opportunities for efficient utilization of renewable resources under mild conditions. Here, the novel three-dimensional hierarchical flower-like CdS/Ti3 C2 Schottky junction (MCdS) composed of surface-controlled CdS and pretreated Ti3 C2 MXene is created for photocatalytic dehydrogenation-reductive amination of biomass-derived amino acid production under ambient temperature with unprecedented activity and selectivity. Schottky junction efficiently promotes photoexcited charge migration and separation and inhibits photogenerated electron-hole recombination, which results in a super-high activity. Meanwhile, CdS with the reduced surface energy supplies sufficient hydrogen sources for imine reduction and induces the preferential orientation of alanine, thus contributing superior selectivity. Moreover, a wide range of hydroxyl acids are successfully converted into corresponding amino acids and even one-pot conversion of glucose to alanine is easily achieved over MCdS. This work illustrates the mechanism of crystal orientation control and heterojunction construction in controlling catalytic behavior of photocatalytic nanoreactor, providing a paradigm for construction of MXene-based heterostructure.

Enhancement of MXene optical properties towards medical applications via metal oxide incorporation

MXenes have garnered research attention in the field of biomedical applications due to their unique properties, such as a large surface area, low toxicity, biocompatibility, and stability. Their optical behavior makes them versatile for a wide range of biomedical applications, from diagnostics to therapeutics. Nonetheless, MXenes have some minor limitations, including issues with restacking, susceptibility to oxidation, and a non-semiconducting nature. These limitations have prompted researchers to explore the incorporation of metal oxides into MXene structures. Metal oxides possess advantageous properties such as a high surface area, biocompatibility, intriguing redox behavior, catalytic activity, semiconducting properties, and enhanced stability. Incorporating metal oxides into MXenes can significantly improve their conductivity, surface area, and mechanical strength. In this review, we emphasize the importance of incorporating metal oxides into MXenes for light-influenced biomedical applications. We also provide insights into various preparation methods for incorporating metal oxides into MXene structures. Furthermore, we discuss how the incorporation of metal oxides enhances the optical behavior of MXenes. Finally, we offer a glimpse into the future potential of metal oxide-incorporated MXenes for diverse biomedical applications.

Carbon-Based Radar Absorbing Materials toward Stealth Technologies

Stealth technology is used to enhance the survival of military equipment in the field of military surveillance, as it utilizes a combination of techniques to render itself undetectable by enemy radar systems. Radar absorbing materials (RAMs) are specialized materials used to reduce the reflection (or absorption) of radar signals to provide stealth capability, which is a core component of passive countermeasures in military applications. The properties of RAMs can be optimized by adjusting their composition, microstructure, and surface geometry. Carbon-based materials present a promising approach for the fabrication of ultrathin, versatile, and high-performance RAMs due to their large specific surface area, lightweight, excellent dielectric properties, high electrical conductivity, and stability under harsh conditions. This review begins with a brief history of stealth technology and an introduction to electromagnetic waves, radar systems, and radar absorbing materials. This is followed by a discussion of recent research progress in carbon-based RAMs, including carbon blacks, carbon fibers, carbon nanotubes, graphite, graphene, and MXene, along with an in-depth examination of the principles and strategies on electromagnetic attenuation characteristics. Hope this review will offer fresh perspectives on the design and fabrication of carbon-based RAMs, thereby fostering a deeper fundamental understanding and promoting practical applications.

WS2-intercalated Ti3C2Tx MXene/TiO2-stacked hybrid structure as an excellent sonophotocatalyst for tetracycline degradation and nitrogen fixation

Designing a heterostructure nanoscale catalytic site to facilitate N2 adsorption and photogenerated electron transfer would maximize the potential for photocatalytic activity and N2 reduction reactions. Herein, we have explored the interfacial TiO2 nanograins between the Ti3C2TxMXene-WS2 heterostructure and addressed the beneficial active sites to expand the effective charge transfer rate and promote sonophotocatalytic N2 fixation. Benefiting from the interfacial contact and dual heterostructure interface maximizes the photogenerated carrier separation between WS2 and MXene/TiO2. The sonophotocatalytic activity of the MXene@TiO2/WS2 hybrid, which was assessed by examining the photoreduction of N2 with ultrasonic irradiation, was much higher than that of either sonocatalytic and photocatalytic activity because of the synergistic sonocatalytic effect under photoirradiation. The Schottky junction between the MXene and TiO2 on the hybrid MXene/TiO2-WS2 heterostructure resulted in the sonophotocatalytic performance through effective charge transfer, which is 1.47 and 1.24 times greater than MXene-WS2 for nitrogen fixation and pollutant degradation, respectively. Under the sonophotocatalytic process, the MXene/TiO2-WS2 heterostructure exhibits a decomposition efficiency of 98.9 % over tetracycline in 90 min, which is 5.46, 1.73, and 1.10 times greater than those of sonolysis, sonocatalysis, and photocatalysis, respectively. The production rate of NH3 on MXene/TiO2-WS2 reached 526 μmol g-1h-1, which is 3.17, 3.61, and 1.47 times higher than that of MXene, WS2, and MXene-WS2, respectively. The hybridized structure of MXene-WS2 with interfacial surface oxidized TiO2 nanograins minimizes the band potential and improves photocarrier use efficiency, contributing directly to the remarkable catalytic performance towards N2 photo fixation under visible irradiation under ultrasonic irradiation. This report provides the strategic outcome for the mass carrier transfer rate and reveals a high conversion efficiency in the hybridized heterostructure.

Enhancing Photocatalytic Hydrogen Evolution by Synergistic Benefits of MXene Cocatalysis and Homo-Interface Engineering

Photocatalytic water splitting holds great promise as a sustainable and cost-effectiveness alternative for the production of hydrogen. Nevertheless, the practical implementation of this strategy is hindered by suboptimal visible light utilization and sluggish charge carrier dynamics, leading to low yield. MXene is a promising cocatalyst due to its high conductivity, abundance of active sites, tunable terminal functional groups, and great specific surface area. Homo-interface has perfect lattice matching and uniform composition, which are more conducive to photogenerated carriers' separation and migration. In this study, a novel ternary heterogeneous photocatalyst, a-TiO2 /H-TiO2 /Ti3 C2 MXene (MXTi), is presented using an electrostatic self-assembly method. Compared to commercial P25, pristine anatase, and rutile TiO2 , as-prepared MXTi exhibit exceptional photocatalytic hydrogen evolution performance, achieving a rate of 0.387 mmol h-1 . The significant improvement is attributable to the synergistic effect of homo-interface engineering and Ti3 C2 MXene, which leads to widened light absorption and efficient carrier transportation. The findings highlight the potential of interface engineering and MXene cocatalyst loading as a proactive approach to enhance the performance of photocatalytic water splitting, paving the way for more sustainable and efficient hydrogen production.

Room Temperature Chemiresistive Gas Sensors Based on 2D MXenes

Owing to their large surface area, two-dimensional (2D) semiconducting nanomaterials have been extensively studied for gas-sensing applications in recent years. In particular, the possibility of operating at room temperature (RT) is desirable for 2D gas sensors because it significantly reduces the power consumption of the sensing device. Furthermore, RT gas sensors are among the first choices for the development of flexible and wearable devices. In this review, we focus on the 2D MXenes used for the realization of RT gas sensors. Hence, pristine, doped, decorated, and composites of MXenes with other semiconductors for gas sensing are discussed. Two-dimensional MXene nanomaterials are discussed, with greater emphasis on the sensing mechanism. MXenes with the ability to work at RT have great potential for practical applications such as flexible and/or wearable gas sensors.

Synergistic photothermal conversion and photocatalysis in 2D/2D MXene/Bi2S3 hybrids for efficient solar-driven water purification

Plasmonic hybrids are regarded as promising candidates for water purification due to their structure-dependent photocatalysis and photothermal performance. It remains a challenge to develop materials that possess these two characteristics for efficient water purification. Herein, plasmonic Ti3C2Tx/Bi2S3 two-dimensional (2D)/2D hybrids were prepared for efficient solar-driven water purification via the combination of photothermal conversion and photocatalysis. Benefitting from broad light absorption, large 2D/2D interfaces, and efficient charge transfer, the binary hybrids showed high-efficiency photothermal conversion and photothermal-assisted photocatalytic activity. By depositing these 2D/2D hybrids on a hydrophilic and porous cotton piece, the Ti3C2Tx/Bi2S3 membrane displayed a high water evaporation rate and solar-to-vapor efficiency under one-sun irradiation. The solar-driven evaporation of seawater, heavy metal ion solution, and dye solution jointly indicated that the plasmonic membrane shows great potential for drinkable water generation and industrial wastewater treatment. Most importantly, the synergistic effect of photothermal evaporation and photocatalysis of the Ti3C2Tx/Bi2S3 membrane on water purification was demonstrated. The polluted water can not only be treated by evaporation, but also be degraded via photocatalysis under solar light irradiation. This work provides new insight into designing functional materials for water purification based on the combination of photothermal conversion and photocatalysis.

Transparent Electronics for Wearable Electronics Application

Recent advancements in wearable electronics offer seamless integration with the human body for extracting various biophysical and biochemical information for real-time health monitoring, clinical diagnostics, and augmented reality. Enormous efforts have been dedicated to imparting stretchability/flexibility and softness to electronic devices through materials science and structural modifications that enable stable and comfortable integration of these devices with the curvilinear and soft human body. However, the optical properties of these devices are still in the early stages of consideration. By incorporating transparency, visual information from interfacing biological systems can be preserved and utilized for comprehensive clinical diagnosis with image analysis techniques. Additionally, transparency provides optical imperceptibility, alleviating reluctance to wear the device on exposed skin. This review discusses the recent advancement of transparent wearable electronics in a comprehensive way that includes materials, processing, devices, and applications. Materials for transparent wearable electronics are discussed regarding their characteristics, synthesis, and engineering strategies for property enhancements. We also examine bridging techniques for stable integration with the soft human body. Building blocks for wearable electronic systems, including sensors, energy devices, actuators, and displays, are discussed with their mechanisms and performances. Lastly, we summarize the potential applications and conclude with the remaining challenges and prospects.

Role of MXenes in advancing soft robotics

MXenes with their unique electronic, optical, chemical, and mechanical properties have shown great promise in soft robotics. MXene-based soft actuators have been designed to display ultrafast actuations and recovery speeds as well as angle-independent structural colors in response to vapor. Several studies have developed soft actuators by combining MXenes with other materials to mimic the movement of natural organisms. Thus, MXene-based soft actuators have the potential to revolutionize the field of soft robotics and flexible electronics (e.g., wearable devices and artificial muscles). MXene-based artificial muscles have been explored for use in kinetic soft robotics as actuators in microsystems requiring exceptional compliance. MXene-based sensors and actuators have already been developed for human-like sensors and photodetection. However, there are still challenges that need to be addressed in such applications, such as the design of stretchable and compliant robotic skins with a high-level functional integration for soft robotics. The integration of various devices, such as power sources, sensors, and actuators, into soft robotics is another crucial challenge. Despite the excellent stretchability and tensile strength of MXene-based composites, there is a vital need to develop their mechanical and electrochemical features and grant them multi-functionalities. Herein, recent developments pertaining to the applications of MXenes and their composites in soft robotics are discussed with a focus on the important challenges and future perspectives.

Direct synthesis of hydrogen fluoride-free multilayered Ti3C2/TiO2 composite and its applications in photocatalysis

Ti3C2/TiO2 hybrids are environment-friendly and exhibit excellent photocatalytic and hydrogen-generating power characteristics. Herein, a novel single-step method is proposed for fabricating multilayer structures in which TiO2, generated from (NH4)2TiF6, wraps the Ti3C2 MXene by etching Ti3AlC2 with (NH4)2TiF6. The optimal reaction conditions for the etching of Ti3AlC2 with (NH4)2TiF6 were systematically studied. The phase composition, morphology, and photophysical properties of the Ti3C2/TiO2 hybrids were investigated using X-ray diffraction, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, and UV-vis spectrophotometry. The thermal stability of the hybrids was investigated using thermogravimetric and differential thermal analyses. Along with the formation of Ti3C2 MXene, Ti3AlC2 reacted with (NH4)2TiF6 at 60 °C for 24 h to form hybrids surrounded by NH4TiOF3 crystals. Subsequent reactions of these hybrids with H3BO3 resulted in the conversion of NH4TiOF3 crystals into TiO2 and eventually into Ti3C2/TiO2 hybrids. Furthermore, the photocatalytic activity of the Ti3C2/TiO2 hybrids was measured by monitoring the photodegradation of methylene blue under ultraviolet light, which showed that the photocatalytic activity of the Ti3C2/TiO2 hybrids was higher than that of the commercial anatase TiO2 nanoparticles.

Theoretical prediction and shape-controlled synthesis of two-dimensional semiconductive Ni3TeO6

Current progress in two-dimensional (2D) materials explorations leads to constant specie enrichments of possible advanced materials down to two dimensions. The metal chalcogenide-based 2D materials are promising grounds where many adjacent territories are waiting to be explored. Here, a stable monolayer Ni3TeO6 (NTO) structure was computationally predicted and its stacked 2D nanosheets experimentally synthesized. Theoretical design undergoes featuring coordination of metalloid chalcogen, slicing the bulk structure, geometrical optimizations and stability study. The predicted layered NTO structure is realized in nanometer-thick nanosheets via a one-pot shape-controlled hydrothermal synthesis. Compared to the bulk, the 2D NTO own a lowered bandgap energy, more sensitive wavelength selectivity and an emerging photocatalytic hydrogen evolution ability under visible light. Beside a new 2D NTO with the optoelectrical and photocatalytic merits, its existing polar space group, structural specification, and design route are hoped to benefit 2D semiconductor innovations both in species enrichment and future applications.

Electrosorption, Desorption, and Oxidation of Perfluoroalkyl Carboxylic Acids (PFCAs) via MXene-Based Electrocatalytic Membranes

MXenes exhibit excellent conductivity, tunable surface chemistry, and high surface area. Particularly, the surface reactivity of MXenes strongly depends on surface exposed atoms or terminated groups. This study examines three types of MXenes with oxygen, fluorine, and chlorine as respective terminal atoms and evaluates their electrosorption, desorption, and oxidative properties. Two perfluorocarboxylic acids (PFCAs), perfluorobutanoic acid (PFBA) and perfluorooctanoic acid (PFOA) are used as model persistent micropollutants for the tests. The experimental results reveal that O-terminated MXene achieves a significantly higher adsorption capacity of 215.9 mg·g^-1 and an oxidation rate constant of 3.9 × 10^-2 min^-1 for PFOA compared to those with F and Cl terminations. Electrochemical oxidation of the two PFCAs (1 ppm) with an applied potential of +6 V in a 0.1 M Na₂SO₄ solution yields >99% removal in 3 h. Moreover, PFOA degrades about 20% faster than PFBA on O-terminated MXene. The density functional theory (DFT) calculations reveal that the O-terminated MXene surface yielded the highest PFOA and PFBA adsorption energy and the most favorable degradation pathway, suggesting the high potential of MXenes as highly reactive and adsorptive electrocatalysts for environmental remediation.

Recent catalytic applications of MXene-based layered nanomaterials

The urgent issues related to the catalytic processes and energy applications have accelerated the development of hybrid and smart materials. MXenes are a new family of atomic layered nanostructured materials that require considerable research. Tailorable morphologies, strong electrical conductivity, great chemical stability, large surface-to-volume ratios, tunable structures, among others are some significant characteristics that make MXenes appropriate for various electrochemical reactions, including dry reforming of methane, hydrogen evolution reaction, methanol oxidation reaction, sulfur reduction reaction, Suzuki-Miyaura coupling reaction, water-gas shift reaction, and so forth. MXenes, on the other hand, have a fundamental drawback of agglomeration, as well as poor long-term recyclability and stability. One possibility for overcoming the restrictions is the fusion of nanosheets or nanoparticles with MXenes. Herein, the relevant literature on the synthesis, catalytic stability and reusability, and applications of several MXene-based nanocatalysts are deliberated including the merits and cons of the newer MXene-based catalysts.

Metal-Free 2D/2D van der Waals Heterojunction Based on Covalent Organic Frameworks for Highly Efficient Solar Energy Catalysis

Covalent organic frameworks (COFs) have emerged as a kind of rising star materials in photocatalysis. However, their photocatalytic activities are restricted by the high photogenerated electron-hole pairs recombination rate. Herein, a novel metal-free 2D/2D van der Waals heterojunction, composed of a two-dimensional (2D) COF with ketoenamine linkage (TpPa-1-COF) and 2D defective hexagonal boron nitride (h-BN), is successfully constructed through in situ solvothermal method. Benefitting from the presence of VDW heterojunction, larger contact area and intimate electronic coupling can be formed between the interface of TpPa-1-COF and defective h-BN, which make contributions to promoting charge carriers separation. The introduced defects can also endow the h-BN with porous structure, thus providing more reactive sites. Moreover, the TpPa-1-COF will undergo a structural transformation after being integrated with defective h-BN, which can enlarge the gap between the conduction band position of the h-BN and TpPa-1-COF, and suppress electron backflow, corroborated by experimental and density functional theory calculations results. Accordingly, the resulting porous h-BN/TpPa-1-COF metal-free VDW heterojunction displays outstanding solar energy catalytic activity for water splitting without co-catalysts, and the H2 evolution rate can reach up to 3.15 mmol g-1 h-1, which is about 67 times greater than that of pristine TpPa-1-COF, also surpassing that of state-of-the-art metal-free-based photocatalysts reported to date. In particular, it is the first work for constructing COFs-based heterojunctions with the help of h-BN, which may provide new avenue for designing highly efficient metal-free-based photocatalysts for H2 evolution.

A Review on Interface Engineering of MXenes for Perovskite Solar Cells

With an excellent power conversion efficiency of 25.7%, closer to the Shockley-Queisser limit, perovskite solar cells (PSCs) have become a strong candidate for a next-generation energy harvester. However, the lack of stability and reliability in PSCs remained challenging for commercialization. Strategies, such as interfacial and structural engineering, have a more critical influence on enhanced performance. MXenes, two-dimensional materials, have emerged as promising materials in solar cell applications due to their metallic electrical conductivity, high carrier mobility, excellent optical transparency, wide tunable work function, and superior mechanical properties. Owing to different choices of transition elements and surface-terminating functional groups, MXenes possess the feature of tuning the work function, which is an essential metric for band energy alignment between the absorber layer and the charge transport layers for charge carrier extraction and collection in PSCs. Furthermore, adopting MXenes to their respective components helps reduce the interfacial recombination resistance and provides smooth charge transfer paths, leading to enhanced conductivity and operational stability of PSCs. This review paper aims to provide an overview of the applications of MXenes as components, classified according to their roles as additives (into the perovskite absorber layer, charge transport layers, and electrodes) and themselves alone or as interfacial layers, and their significant importance in PSCs in terms of device performance and stability. Lastly, we discuss the present research status and future directions toward its use in PSCs.

Natural oxidation of Ti3C2Tx to construct efficient TiO2/Ti3C2Tx photoactive heterojunctions for advanced photoelectrochemical biosensing of folate-expressing cancer cells

The rapid-charge carrier recombination and low conductivity are critical in devising an efficient photoelectrochemical (PEC) sensor. Herein, we propose partial oxidation of few-layered MXene (Ti₃C₂T_x) to construct a photo-active TiO₂/Ti₃C₂T_x platform that could be configured for PEC sensing of folate receptors (FR), particularly, FR-expressing breast cancer cells (MDA-MB-231). MXene-Ti₃C₂T_x dispersion was oxidized in natural-open air conditions, where continuous exposure for six (06) days allowed for homogeneous in-situ growth of TiO₂ over MXenes nanosheets (MX-06). This exposure enabled partial oxidation of MXene-sheets with a balanced TiO₂ to MXene content that could exhibit improved photoresponsive characteristics owing to the synergism of redox-active TiO₂ and highly conductive underlying Ti₃C₂T_x. The photoelectrode was then adapted for biorecognition by conjugating chitosan and folic acid (FA) networks, which permitted selective detection of FR-expressed cells with significant antifouling capabilities against common proteins such as bovine serum album (BSA), hemoglobin, and immunoglobulin G. (Ig G). The detection mechanism relies on FA's strong affinity for cancer cell folate receptors, which proportionally inhibited the photoelectrodes PEC oxidation response to ascorbic acid (AA)(mediator). The proposed inhibition strategy enabled sensitive detection of FR-expressed MDA-MB-231 cells in the concentration range of 1 × 10² to 2 × 10⁷ cells/mL with a detection limit of 1.01 cells/mL (S/N = 3).