Active Site Engineering on Plasmonic Nanostructures for Efficient Photocatalysis

Plasmonic Supramolecular Nanozyme-Based Bio-Cockleburs for Synergistic Therapy of Infected Diabetic Wounds

Diabetic wounds are a major devastating complication of diabetes due to hyperglycemia, bacterial invasion, and persistent inflammation, and the current antibiotic treatments can lead to the emergence of multidrug-resistant bacteria. Herein, a bimetallic nanozyme-based biomimetic bio-cocklebur (GNR@CeO2@GNPs) is designed and synthesized for diabetic wound management by depositing spiky ceria (CeO2) shells and gold nanoparticles (GNPs) on a gold nanorod (GNR) nanoantenna. The plasmonic-enhanced nanozyme catalysis and self-cascade reaction properties simultaneously boost the two-step enzyme-mimicking catalytic activity of GNR@CeO2@GNPs, leading to a significant improvement in overall therapeutic efficacy rather than mere additive effects. Under the glucose activation and 808 nm laser irradiation, GNR@CeO2@GNPs material captures photons and promotes the transfer of hot electrons from GNR and GNPs into CeO2, realizing a "butterfly effect" of consuming local glucose, overcoming the limited antibacterial efficiency of an individual PTT modality, and providing substantial reactive oxygen species. In vitro and in vivo experiments demonstrate the material's exceptional antibacterial and antibiofilm properties against Gram-negative and Gram-positive bacteria, which can reduce inflammation, promote collagen deposition, and facilitate angiogenesis, thereby accelerating wound healing. This study provides a promising new strategy to develop plasmonic-enhanced nanozymes with a catalytic cascade mode for the antibiotic-free synergistic treatment of infected diabetic wounds.

Using TiO2 to capture hot electrons for self-powered position-sensitive photodetection

As environmental issues arise, the demand for self-powered position-sensitive detectors (PSDs) is increasing because of their advantages in miniaturization and low power consumption. Finding higher efficiency schemes for energy conversion is paramount for realizing high-performance self-powered PSDs. Here, a surface plasmon-based approach was used to improve the energy conversion efficiency, and a plasmon-enhanced lateral photovoltaic effect (LPE) was observed in PSD with TiO2/Au nanorods (NRs)/Si structure. The Au NRs convert absorbed light energy into electricity by generating hot electrons, which are efficiently captured by the TiO2 layer, and the PSD is capable of generating position sensitivity as high as 251.75 mV/mm when illuminated by a 780 nm laser without any external power supply, i.e. about five times higher than similar sensors in previous studies. In addition, the position sensitivity can be tailored by the thickness of TiO2 films. The enhancement mechanism is investigated by a localized surface plasmon (LSP)-driven carrier diffusion model. These findings reveal an important strategy for high sensitivity and low energy cost PSDs while opening up new avenues for energy harvesting self-powered position sensors.

Advances in LDI-MS Analysis: The Role of Chemical Vapor Deposition-Synthesized Silver Nanoparticles in Enhancing Detection of Low-Molecular-Weight Biomolecules

In this investigation, we detail the synthesis of silver nanoparticles (AgNPs) via a precise chemical vacuum deposition (CVD) methodology, aimed at augmenting the analytical performance of laser desorption/ionization mass spectrometry (LDI-MS) for the detection of low-molecular-weight analytes. Employing a precursor supply rate of 0.0014 mg/s facilitated the formation of uniformly dispersed AgNPs, characterized by SEM and AFM to have an average diameter of 33.5 ± 1.5 nm and a surface roughness (Ra) of 11.8 nm, indicative of their homogeneous coverage and spherical morphology. XPS and SEM-EDX analyses confirmed the metallic silver composition of the nanoparticles with Ag peak splitting, reflecting the successful synthesis of metallic Ag. Comparative analytical evaluation with traditional MALDI matrices revealed that AgNPs significantly reduce signal suppression, thereby enhancing the sensitivity and specificity of LDI-MS for low-molecular-weight compounds such as triglycerides, saccharides, amino acids, and carboxylic acids. Notably, the application of AgNPs demonstrated a superior linear response for triglyceride signals with regression coefficients surpassing 0.99, markedly outperforming conventional matrices. The study further extends into quantitative analysis through nanoparticle-based laser desorption/ionization (NALDI), where AgNPs exhibited enhanced ionization efficiency, characterized by substantially lower limits of detection (LOD) and quantification (LOQ) for tested standards. Particular attention was paid to lipids with a detailed examination of their fragmentation pathways. These results highlight the significant potential of AgNPs synthesized via CVD to transform the analytical detection and quantification of low-molecular-weight compounds using NALDI. This approach offers a promising avenue for expanding the scope of analytical applications in mass spectrometry and introducing innovative methodologies for enhanced precision and sensitivity.

Plasmonic-mediated SC arylation and SS coupling on nanostructured silver electrodes monitored by in situ surface-enhanced Raman spectroscopy

Plasmon-mediated chemical reaction (PMCR) is a highly attractive field of research. Here we report in situ surface-enhanced Raman spectroscopic (SERS) monitoring of plasmonic-mediated SS bond-forming reaction. The reaction is thought to be a self-coupling reaction proceeding by photoinduced aromatic SC bond arylation. Surprisingly, the SC arylation and SS coupling are found to be occurred on both partially oxidized silver and silver nanoparticles. The results demonstrated that silver oxide or hydroxide and small molecule donor sacrifice agent played a crucial role in the reaction. This work facilitates the in-situ manipulation and characterization of the active silver electrode interface in conjunction with electrochemistry, and also establishes a promising new guideline for surface plasmon resonance photocatalytic reactions on metal nanostructures with high efficiency.

Full-spectrum plasmonic semiconductors for photocatalysis

Localized surface plasmon resonance (LSPR) of noble metal nanoparticles can focus surrounding light onto the particle surface to boost photochemical reactions and solar energy utilization. However, the rarity and high cost of noble metals limit their applications in plasmonic photocatalysis, forcing researchers to seek low-cost alternatives. Recently, some heavily doped semiconductors with high free carrier density have garnered attention due to their metal-like LSPR properties. However, plasmonic semiconductors have complex surface structures characterized by the presence of a depletion layer, which poses challenges for active site exposure and hot carrier transfer, resulting in low photocatalytic activity. In this review, we introduce the essential characteristics and types, synthesis methods, and characterization techniques of full-spectrum plasmonic semiconductors, elucidate the mechanism of full-spectrum nonmetallic plasmonic photocatalysis, including the local electromagnetic field, hot carrier generation and transfer, the photothermal effect, and the solutions for the surface depletion layer, and summarize the applications of plasmonic semiconductors in photocatalytic environmental remediation, CO2 reduction, H2 generation, and organic transformations. Finally, we provide a perspective on full-spectrum plasmonic photocatalysis, aiming to guide the design and development of plasmonic photocatalysts.

Efficient Charge Separation in Ag/PCN/UPDI Ternary Heterojunction for Optimized Photothermal-Photocatalytic Performance via Tandem Electric Fields

Charge separation driven by the internal electric field is a research hotspot in photocatalysis. However, it remains challenging to accurately control the electric field to continuously accelerate the charge transfer. Herein, a strategy of constructing a tandem electric field to continuously accelerate charge transfer in photocatalysts is proposed. The plasma electric field, interface electric field, and intramolecular electric field are integrated into the Ag/g-C3N4/urea perylene imide (Ag/PCN/UPDI) ternary heterojunction to achieve faster charge separation and longer carrier lifetime. The triple electric fields function as three accelerators on the charge transport path, promoting the separation of electron-hole pairs, accelerating charge transfer, enhancing light absorption, and increasing the concentration of energetic electrons on the catalyst. The H2 evolution rate of Ag/PCN/UPDI is 16.8 times higher than that of pristine PDI, while the degradation rate of oxytetracycline is increased by 4.5 times. This new strategy will provide a groundbreaking idea for the development of high-efficiency photocatalysts.

Plasmon-Switched Kinetics for Formic Acid Dehydrogenation: Selective Adsorption Driven by Local Field and Hot Carriers

Understanding illumination-mediated kinetics is essential for catalyst design in plasmon catalysis. Here we prepare Pd-based plasmonic catalysts with tunable electronic structures to reveal the underlying illumination-enhanced kinetic mechanisms for formic acid (HCOOH) dehydrogenation. We demonstrate a kinetic switch from a competitive Langmuir-Hinshelwood adsorption mode in dark to a non-competitive type under irradiation triggered by local field and hot carriers. Specifically, the electromagnetic field induces a spatial-temporal separation of dehydrogenation-favorable configurations of reactant molecule HCOOH and HCOO- due to their natural different polarities. Meanwhile, the generated energetic carriers can serve as active sites for selective molecular adsorption. The hot electrons act as adsorption sites for HCOOH, while holes prefer to adsorb HCOO-. Such unique non-competitive adsorption kinetics induced by plasmon effects serves as another typical characteristic of plasmonic catalysis that remarkably differs from thermocatalysis. This work unravels unique adsorption transformations and a kinetic switching driven by plasmon nonthermal effects.

Seeded Growth of Size-Tunable Au@Ag Core-Shell Nano-Octahedra and Their Yolk-Shell Derivatives for Near Infrared Photothermal Conversion

Gold-based nanostructures with well-defined morphologies and hollow interiors have significant potential as a versatile platform for various plasmonic applications including biomedical diagnostics and sensing. In this study, we report the synthesis of Au@Ag core-shell nanocrystals with perfect octahedral shapes and tunable edge lengths via seeded growth. These nanocrystals were then oxidatively carved into yolk-shell nanocages with a retained octahedral morphology. The increase in octahedral edge length and volume of the interior hollow cavity synergistically leads to a red-shift of the LSPR peak. As a result, the optimized Au@AuAg yolk-shell octahedral nanocages showed a remarkable temperature increase of 23 °C upon 15 min irradiation of an 808 nm laser at a power density of 1 W cm-2. This study provides a feasible strategy for creating octahedral AuAg nanostructures with tunable sizes and hollow interiors and validates their promising use in NIR photothermal conversion.

S-vacancy-assisted fast charge transport and oriented ReS2 growth in twin crystal ZnxCd1-xS: an atomic-level heterostructure for dual-functional photocatalytic conversion

The achievement of dual-functional photocatalytic technology requires a photocatalyst with accelerated charge flow and purposeful active-site arrangement. In this study, we developed an oriented embedding strategy to induce ReS2 growth at the S vacancy in twin-crystal Zn0.5Cd0.5S solid solution (Sv-ZCS), obtaining an atomic-level heterostructure (ReS2/Sv-ZCS). The electronic structure calculations demonstrate that the charge density of the Zn atom around the S vacancy is higher than for other Zn atoms and the introduced S vacancy establishes a high-speed channel for electron transport via formed Zn-S-Re bonds at the interface between ReS2 and Sv-ZCS. Photogenerated electrons and holes gathered on Re atoms and Sv-ZCS, respectively, which achieves spatial charge separation and separated arrangement for redox sites. As a result, the optimized ReS2/Sv-ZCS heterostructure possesses high efficiency of electron injection (2.6-fold) and charge separation (8.44-fold), as well as excellent conductivity capability (20.16-fold). The photocatalytic performance of the ReS2/Sv-ZCS composite exhibits highly improved dual-functional activity with simultaneous H2 evolution and selective oxidation of benzyl alcohol. The reaction rate of benzaldehyde and H2 evolution reaches 125 mmol gcat-1 h-1 and 159 mmol gcat-1 h-1, which is the highest efficiency achieved so far for simultaneous coproduction of H2 fuel and organic chemicals on ReS2-based composites. This work enriches the application of ReS2-modified composites in a dual-functional photoredox system and also gives insight into the role of defects in electronic structure modification and activity improvement.

Recent progress in SERS monitoring of photocatalytic reactions

Surface-enhanced Raman spectroscopy (SERS) is a powerful analytical technique renowned for its ultra-high sensitivity. Extensive research in SERS has led to the development of a wide range of SERS substrates, including plasmonic metals, semiconductors, metal organic frameworks, and their assemblies. Some of these materials are also excellent photocatalysts, and by taking advantage of their bifunctional characteristics, the photocatalytic processes that occur on their surface can be monitored in situ via SERS. This provides us with unique opportunities to gain valuable insights into the intricate details of the photocatalytic processes that are challenging to access using other techniques. In this review, we highlight key development in in situ and/or real-time SERS-tracking of photocatalytic reactions. We begin by providing a brief account of recent developments in SERS substrates, followed by discussions on how SERS can be used to elucidate crucial aspects of photocatalytic processes, including: (1) the influence of the surrounding media on charge carrier extraction; (2) the direction of charge carrier transfer; (3) the pathway of photocatalytic activation; and (4) differentiation between the effects of photo-thermal and energetic electrons. Additionally, we discuss the benefits of tip-enhanced Raman spectroscopy (TERS) due to the ability to achieve high-spatial-resolution measurements. Finally, we address major challenges and propose potential directions for the future of SERS monitoring of photocatalytic reactions. By leveraging the capabilities of SERS, we can uncover new insights into photocatalytic processes, paving the way for advancements in sustainable energy and environmental remediation.

Key Factors for Controlling Plasmon-Induced Chemical Reactions on Metal Surfaces

Plasmon-induced chemical reactions based on direct interactions between the plasmons of metal nanostructures and molecules have attracted increasing attention as a means of efficiently utilizing sunlight. In recent years, achievements in complex synthetic reactions as well as simple dissociation reactions of gaseous molecules using plasmons have been reported. However, recent research progress has revealed that multiple factors govern plasmon-induced chemical reactions. This perspective provides an overview of the key factors that influence plasmon-induced chemical reactions on metal surfaces and discusses the difficulty of controlling the reactions, which is caused by the entanglement of the key factors. A strategy for designing plasmonic metal catalysts to achieve the desired reactions is also discussed based on the current understanding, and directions for further research are provided.

Massively Scalable Self-Assembly of Nano and Microparticle Monolayers via Aerosol Assisted Deposition

An extremely rapid process for self-assembling well-ordered, nano, and microparticle monolayers via a novel aerosolized method is presented. The novel technique can reach monolayer self-assembly rates as high as 268 cm2 min-1 from a single aerosolizing source and methods to reach faster monolayer self-assembly rates are outlined. A new physical mechanism describing the self-assembly process is presented and new insights enabling high-efficiency nanoparticle monolayer self-assembly are developed. In addition, well-ordered monolayer arrays from particles of various sizes, surface functionality, and materials are fabricated. This new technique enables a 93× increase in monolayer self-assembly rates compared to the current state of the art and has the potential to provide an extremely low-cost option for submicron nanomanufacturing.

Photo-enhanced dehydrogenation of formic acid on Pd-based hybrid plasmonic nanostructures

Coupling visible light with Pd-based hybrid plasmonic nanostructures has effectively enhanced formic acid (FA) dehydrogenation at room temperature. Unlike conventional heating to achieve higher product yield, the plasmonic effect supplies a unique surface environment through the local electromagnetic field and hot charge carriers, avoiding unfavorable energy consumption and attenuated selectivity. In this minireview, we summarized the latest advances in plasmon-enhanced FA dehydrogenation, including geometry/size-dependent dehydrogenation activities, and further catalytic enhancement by coupling local surface plasmon resonance (LSPR) with Fermi level engineering or alloying effect. Furthermore, some representative cases were taken to interpret the mechanisms of hot charge carriers and the local electromagnetic field on molecular adsorption/activation. Finally, a summary of current limitations and future directions was outlined from the perspectives of mechanism and materials design for the field of plasmon-enhanced FA decomposition.

Au@C/Pt core@shell/satellite supra-nanostructures: plasmonic antenna-reactor hybrid nanocatalysts

Integration of plasmonic nanoantennas with catalytically active reactors in deliberately designed hybrid supra-nanostructures creates a dual-functional materials platform, based upon which precise modulation of catalytic reaction kinetics becomes accomplishable through optical excitations of plasmon resonances. Here, we have developed a multistep synthetic approach that enables us to assemble colloidal Au@C/Pt core@shell/satellite supra-nanostructures, in which the Au core functions as a light-harvesting plasmonic nanoantenna, the Pt satellites act as catalytically active reactors, and the C shell serves as a nanoscale dielectric spacer separating the reactors from the antenna, respectively. By adjusting several synthetic parameters, the size of the Au core, the thickness of the C shell, and the surface coverage of Pt satellites can all be tuned independently. Choosing Pt-catalyzed cascade oxidation of 3,3',5,5'-tetramethylbenzidine in an aerobic aqueous environment as a model reaction, we have systematically studied the detailed kinetic features of the catalytic reactions both in the dark and under visible light illumination over a broad range of reaction conditions, which sheds light on the interplay between plasmonic and catalytic effects in these antenna-reactor nanohybrids. The plasmonic antenna effect can be effectively harnessed to kinetically modulate multiple crucial steps during the cascade reactions, benefiting from plasmon-enhanced interband electronic transitions in the Pt satellites and plasmon-enhanced intramolecular electronic excitations in chromogenic intermediate species. In addition to the plasmonic antenna effect, photothermal transduction derived from plasmonic excitations can also provide significant contributions to the kinetic enhancements under visible light illumination. The knowledge gained from this work serves as important guiding principles for rational design and structural optimization of plasmonic antenna-reactor hybrid nanomaterials, endowing us with enhanced capabilities to kinetically modulate targeted catalytic/photocatalytic molecule-transforming processes through light illumination.

Enhanced Active Sites and Stability in Nano-MOFs for Electrochemical Energy Storage through Dual Regulation by Tannic Acid

The limited active sites and poor acid-alkaline solution stability of metal-organic frameworks (MOFs), significantly limit their wider application. In this study, the acid property of tannic acid (TA) was used as an etchant to etch the surface-active sites. Subsequently, the further chelation of the protonated TA with the exposed metal active site can effectively protect the metal ions. Meanwhile, the TA provided a large amount of phenolic hydroxyl groups, which can greatly improve the stability of imidazolate-coordinated MOFs. The electrochemical test results indicated that the MOFs composite materials synthesized using this scheme had high specific capacitance and stability. And the mechanism of its electrochemical reaction process was explored through in situ X-ray diffraction (XRD) and theoretical calculations. In addition, the same treatment was carried out through a series of carboxyl-coordinated MOFs, which further confirmed the principle of this scheme to obtain a higher active site and stability. This paper explains the mechanism of functionalization of nano-MOFs by polyphenolic compounds, providing new ideas for the research of nano-MOFs.

In Situ Fabrication of a 2D/2D MXene/CN Heterojunction for Photothermally Assisted Photocatalytic Sterilization under Visible Light Irradiation

Constructing an efficient visible light-responsive antibacterial material for water treatment remains a principal goal yet is a huge challenge. Herein, a 2D/2D heterojunction composite with robust interfacial contact, named MXene/CN (MCN), was controllably fabricated by using a urea molecule intercalated into MXene following an in situ calcination method, which can realize the rapid separation and migration of photogenerated carriers under visible light irradiation and significantly improve the carrier concentration of the MXene surface, thus generating more reactive oxygen species. The generation of heat induced by MXene could also increase photogenic electron activity to facilitate the photocatalytic reaction using in situ time-resolved photoluminescence characterization. The visible light-activated germicide exhibits a sterilization efficacy against Escherichia coli of 99.70%, higher than those of pure CN (60.21%) and MXene (31.75%), due to the effect of photothermally assisted photocatalytic treatment. This work is an attempt to construct a visible light-driven antimicrobial material using Schottky junctions achieving photothermally assisted photocatalytic disinfection.

Bimetallic core-shell nanocrystals: opportunities and challenges

With mastery over the colloidal synthesis of monometallic nanocrystals, a combination of two distinct metals with intricate architectures has emerged as a new direction of innovation. Among the diverse architectures, the one with a core-shell structure has attracted the most scientific endeavors owing to its merits of high controllability and variability. Along with the new hopes arising from the addition of a shell composed of a different metal, there comes unexpected complications for the surface composition, hindering both structural understanding and application performance. In this Focus article, we present a brief overview of the opportunities provided by the bimetallic core-shell nanocrystals, followed by a discussion of the technical challenge to elucidate the true composition of the outermost surface. Some of the promising solutions are then highlighted as well, aiming to inspire future efforts toward this frontier of research.