Two Mechanisms Determine Quantum Dot Blinking

Biexciton Emission in CsPbBr3 Nanocrystals: Polar Facet Matters

The metal halide perovskite nanocrystals exhibit a remarkable tolerance to midgap defect states, resulting in high photoluminescence quantum yields. However, the potential of these nanocrystals for applications in display devices is hindered by the suppression of biexcitonic emission due to various Auger recombination processes. By adopting single-particle photoluminescence spectroscopy, herein, we establish that the biexcitonic quantum efficiency increases with the increase in the number of facets on cesium lead bromide perovskite nanocrystals, progressing from cube to rhombic dodecahedron to rhombicuboctahedron nanostructures. The observed enhancement is attributed mainly to an increase in their surface polarity as the number of facets increases, which reduces the Coulomb interaction of charge carriers, thereby suppressing Auger recombination. Moreover, Auger recombination rate constants obtained from the time-gated photon correlation studies exhibited a discernible decrease as the number of facets increased. These findings underscore the significance of facet engineering in fine-tuning biexciton emission in metal halide perovskite nanocrystals.

Strongly-confined colloidal lead-halide perovskite quantum dots: from synthesis to applications

Colloidal semiconductor nanocrystals enable the realization and exploitation of quantum phenomena in a controlled manner, and can be scaled up for commercial uses. These materials have become important for a wide range of applications, from ultrahigh definition displays, to solar cells, quantum computing, bioimaging, optical communications, and many more. Over the last decade, lead-halide perovskite nanocrystals have rapidly gained prominence as efficient semiconductors. Although the majority of studies have focused on large nanocrystals in the weak- to intermediate-confinement regime, quantum dots (QDs) in the strongly-confined regime (with sizes smaller than the Bohr diameter, which ranges from 4-12 nm for lead-halide perovskites) offer unique opportunities, including polarized light emission and color-pure, stable luminescence in the region that is unattainable by perovskites with single-halide compositions. In this tutorial review, we bring together the latest insights into this emerging and rapidly growing area, focusing on the synthesis, steady-state optical properties (including exciton fine-structure splitting), and transient kinetics (including hot carrier cooling) of strongly-confined perovskite QDs. We also discuss recent advances in their applications, including single photon emission for quantum technologies, as well as light-emitting diodes. We finish with our perspectives on future challenges and opportunities for strongly-confined QDs, particularly around improving the control over monodispersity and stability, important fundamental questions on the photophysics, and paths forward to improve the performance of perovskite QDs in light-emitting diodes.

Competition among recombination pathways in single FAPbBr3 nanocrystals

Single particle level microscopy of immobilized FAPbBr3 nanocrystals (NCs) has elucidated the involvement of different processes in their photoluminescence (PL) intermittency. Four different blinking patterns are observed in the data from more than 100 NCs. The dependence of PL decays on PL intensities brought out in fluorescence lifetime intensity distribution (FLID) plots is rationalized by the interplay of exciton- and trion-mediated recombinations along with hot carrier (HC) trapping. The high intensity-long lifetime component is attributed to neutral exciton recombination, the low intensity-short lifetime component is attributed to trion assisted recombination, and the low intensity-long lifetime component is attributed to hot carrier recombination. Change-point analysis (CPA) of the PL blinking data reveals the involvement of multiple intermediate states. Truncated power law distribution is found to be more appropriate than power law and lognormal distribution for on and off events. Probability distributions of PL trajectories of single NCs are obtained for two different excitation fluences and wavelengths (λex = 400, 440 nm). Trapping rate (kT) prevails at higher power densities for both excitation wavelengths. From a careful analysis of the FLID and probability distributions, it is concluded that there is competition between the HC and trion assisted blinking pathways and that the contribution of these mechanisms varies with excitation wavelength as well as fluence.

Facet Dependent Photoluminescence Blinking from Perovskite Nanocrystals

Photoluminescence (PL) blinking of nanoparticles, while detrimental to their imaging applications, may benefit next-generation displays if the blinking is precisely controlled by reversible electron/hole injections from an external source. Considerable efforts are made to create well-characterized charged excitons within nanoparticles through electrochemical charging, which has led to enhanced control over PL-blinking in numerous instances. Manipulating the photocharging/discharging rates in nanoparticles by surface engineering can represent a straightforward method for regulating their blinking behaviors, an area largely unexplored for perovskite nanocrystals (PNCs). This work shows facet engineering leading to different morphologies of PNCs characterized by distinct blinking patterns. For instance, examining the PL intensity trajectories of single PNCs, representing the instantaneous photon count rate over time, reveals that the OFF-state population significantly increases as the number of facets increases from six to twenty-six. This study suggests that extra-faceted PNCs, owing to their polar facets and expanded surface area, render them more susceptible to photocharging, which results in larger OFF-state populations. Furthermore, the fluorescence correlation spectroscopy (FCS) study unveils that the augmented propensity for photocharging in extra-faceted PNCs can also originate from their greater tendency to form complexes with neighboring molecules.

Size Uniformity of CsPbBr3 Perovskite Quantum Dots via Manganese-Doping

The achievement of size uniformity and monodispersity in perovskite quantum dots (QDs) requires the implementation of precise temperature control and the establishment of optimal reaction conditions. Nevertheless, the accurate control of a range of reaction variables represents a considerable challenge. This study addresses the aforementioned challenge by employing manganese (Mn) doping to achieve size uniformity in CsPbBr3 perovskite QDs without the necessity for the precise control of the reaction conditions. By optimizing the Mn:Pb ratio, it is possible to successfully dope CsPbBr3 QDs with the appropriate concentrations of Mn²⁺ and achieve a uniform size distribution. The spectroscopic measurements on single QDs indicate that the appropriate Mn²⁺ concentrations can result in a narrower spectral linewidth, a longer photoluminescence (PL) lifetime, and a reduced biexciton Auger recombination rate, thus positively affecting the PL properties. This study not only simplifies the size control of perovskite QDs but also demonstrates the potential of Mn-doped CsPbBr3 QDs for narrow-linewidth light-emitting diode applications.

A closer look at the effects of oxygen on the photoluminescence properties of CdSe/CdS quantum dots

We present a detailed study on the effects of oxygen on the photoluminescence properties of CdSe/CdS quantum dots (QDs). We investigated the role of oxygen by performing confocal measurements on thin films as well as on single particles while rapidly exchanging the gaseous environment between oxygen and an inert gas atmosphere. We found that the deionization of negatively charged particles by oxygen depends on both the excitation power and the shell thickness of the QDs. For QDs with thin shells, which exhibit strong photoluminescence blinking, we observed that the presence of oxygen affects both band-edge carrier blinking and hot-carrier blinking.

A review on synthesis, properties, and biomedical applications of graphene quantum dots (GQDs)

A new type of 0-dimensional carbon-based materials called graphene quantum dots (GQDs) is gaining significant attention as a non-toxic and eco-friendly nanomaterial. GQDs are nanomaterials composed of sp2hybridized carbon domains and functional groups, with their lateral size less than 10 nm. The unique and exceptional physical, chemical, and optical properties arising from the combination of graphene structure and quantum confinement effect due to their nano-size make GQDs more intriguing than other nanomaterials. Particularly, the low toxicity and high solubility derived from the carbon core and abundant edge functional groups offer significant advantages for the application of GQDs in the biomedical field. In this review, we summarize various synthetic methods for preparing GQDs and important factors influencing the physical, chemical, optical, and biological properties of GQDs. Furthermore, the recent application of GQDs in the biomedical field, including biosensor, bioimaging, drug delivery, and therapeutics are discussed. Through this, we provide a brief insight on the tremendous potential of GQDs in biomedical applications and the challenges that need to be overcome in the future.

Conversion of Photoluminescence Blinking Types in Single Colloidal Quantum Dots

Almost all colloidal quantum dots (QDs) exhibit undesired photoluminescence (PL) blinking, which poses a significant obstacle to their use in numerous luminescence applications. An in-depth study of the blinking behavior, along with the associated mechanisms, can provide critical opportunities for fabricating high-quality QDs for diverse applications. Here the blinking of a large series of colloidal QDs is investigated with different surface ligands, particle sizes, shell thicknesses, and compositions. It is found that the blinking behavior of single alloyed CdSe/ZnS QDs with a shell thickness of up to 2 nm undergoes an irreversible conversion from Auger-blinking to band-edge carrier blinking (BC-blinking). Contrastingly, single perovskite QDs with particle sizes smaller than their Bohr diameters exhibit reversible conversion between BC-blinking and more pronounced Auger-blinking. Changes in the effective trapping sites under different excitation conditions are found to be responsible for the blinking type conversions. Additionally, changes in shell thickness and particle size of QDs have a significant effect on the blinking type conversions due to altered wavefunction overlap between excitons and effective trapping sites. This study elucidates the discrepancies in the blinking behavior of various QD samples observed in previous reports and provides deeper understanding of the mechanisms underlying diverse types of blinking.

Fluctuations in the Photoluminescence Excitation Spectra of Individual Semiconductor Nanocrystals

Most single quantum emitters display non-steady emission properties. Models that explain this effect have primarily relied on photoluminescence measurements that reveal variations in intensity, wavelength, and excited-state lifetime. While photoluminescence excitation spectroscopy could provide complementary information, existing experimental methods cannot collect spectra before individual emitters change in intensity (blink) or wavelength (spectrally diffuse). Here, we present an experimental approach that circumvents such issues, allowing the collection of excitation spectra from individual emitters. Using rapid modulation of the excitation wavelength, we collect and classify excitation spectra from individual CdSe/CdS/ZnS core/shell/shell quantum dots. The spectra, along with simultaneous time-correlated single-photon counting, reveal two separate emission-reduction mechanisms caused by charging and trapping, respectively. During bright emission periods, we also observe a correlation between emission red-shifts and the increased oscillator strength of higher excited states. Quantum-mechanical modeling indicates that diffusion of charges in the vicinity of an emitter polarizes the exciton and transfers the oscillator strength to higher-energy transitions.

Highly Efficient MAPbI3-Based Quantum Dots Exhibiting Unusual Nonblinking Single Photon Emission at Room Temperature

Highly emissive semiconductor nanocrystals, or so-called quantum dots (QDs) possess a variety of applications from displays and biology labeling, to quantum communication and modern security. Though ensembles of QDs have already shown very high photoluminescent quantum yields (PLQYs) and have been widely utilized in current optoelectronic products, QDs that exhibit high absorption cross-section, high emission intensity, and, most important, nonblinking behavior at single-dot level have long been desired and not yet realized at room temperature. In this work, infrared-emissive MAPbI3-based halide perovskite QDs is demonstrated. These QDs not only show a ≈100% PLQY at the ensemble level but also, surprisingly, at the single-dot level, display an extra-large absorption cross-section up to 1.80 × 10-12 cm2 and non-blinking single photon emission with a high single photon purity of 95.3%, a unique property that is extremely rare among all types of quantum emitters operated at room temperature. An in-depth analysis indicates that neither trion formation nor band-edge carrier trapping is observed in MAPbI3 QDs, resulting in the suppression of intensity blinking and lifetime blinking. Fluence-dependent transient absorption measurements reveal that the coexistence of non-blinking behavior and high single photon purity in these perovskite QDs results from a significant repulsive exciton-exciton interaction, which suppresses the formation of biexciton, and thus greatly reduces photocharging. The robustness of these QDs is confirmed by their excellent stability under continuous 1 h electron irradiation in high-resolution transmission electron microscope inspection. It is believed that these results mark an important milestone in realizing nonblinking single photon emission in semiconductor QDs.

Weakly Confined Organic-Inorganic Halide Perovskite Quantum Dots as High-Purity Room-Temperature Single Photon Sources

Colloidal perovskite quantum dots (PQDs) have emerged as highly promising single photon emitters for quantum information applications. Presently, most strategies have focused on leveraging quantum confinement to increase the nonradiative Auger recombination (AR) rate to enhance single-photon (SP) purity in all-inorganic CsPbBr3 QDs. However, this also increases the fluorescence intermittency. Achieving high SP purity and blinking mitigation simultaneously remains a significant challenge. Here, we transcend this limitation with room-temperature synthesized weakly confined hybrid organic-inorganic perovskite (HOIP) QDs. Superior single photon purity with a low g(2)(0) < 0.07 ± 0.03 and a nearly blinking-free behavior (ON-state fraction >95%) in 11 nm FAPbBr3 QDs are achieved at room temperature, attributed to their long exciton lifetimes (τX) and short biexciton lifetimes (τXX). The significance of the organic A-cation is further validated using the mixed-cation FAxCs1-xPbBr3. Theoretical calculations utilizing a combination of the Bethe-Salpeter (BSE) and k·p approaches point toward the modulation of the dielectric constants by the organic cations. Importantly, our findings provide valuable insights into an additional lever for engineering facile-synthesized room-temperature PQD single photon sources.

Seeing is believing: Correlating optoelectronic functionality with atomic scale imaging of single semiconductor nanocrystals

A unique on-chip method for the direct correlation of optical properties, with atomic-scale chemical-structural characteristics for a single quantum dot (QD), is developed and utilized in various examples. This is based on performing single QD optical characterization on a modified glass substrate, followed by the extraction of the relevant region of interest by focused-ion-beam-scanning electron microscope processing into a lamella for high resolution scanning transmission electron microscopy (STEM) characterization with atomic scale resolution. The direct correlation of the optical response under an electric field with STEM analysis of the same particle allows addressing several single particle phenomena: first, the direct correlation of single QD photoluminescence (PL) polarization and its response to the external field with the QD crystal lattice alignment, so far inferred indirectly; second, the identification of unique yet rare few-QD assemblies, correlated directly with their special spectroscopic optical characteristics, serving as a guide for future designed assemblies; and third, the study on the effect of metal island growth on the PL behavior of hybrid semiconductor-metal nanoparticles, with relevance for their possible functionality in photocatalysis. This work, therefore, establishes the use of the direct on-chip optical-structural correlation method for numerous scenarios and timely questions in the field of QD research.

Quantum Dot Fluorescent Imaging: Using Atomic Structure Correlation Studies to Improve Photophysical Properties

Efforts to study intricate, higher-order cellular functions have called for fluorescence imaging under physiologically relevant conditions such as tissue systems in simulated native buffers. This endeavor has presented novel challenges for fluorescent probes initially designed for use in simple buffers and monolayer cell culture. Among current fluorescent probes, semiconductor nanocrystals, or quantum dots (QDs), offer superior photophysical properties that are the products of their nanoscale architectures and chemical formulations. While their high brightness and photostability are ideal for these biological environments, even state of the art QDs can struggle under certain physiological conditions. A recent method correlating electron microscopy ultrastructure with single-QD fluorescence has begun to highlight subtle structural defects in QDs once believed to have no significant impact on photoluminescence (PL). Specific defects, such as exposed core facets, have been shown to quench QD PL in physiologically accurate conditions. For QD-based imaging in complex cellular systems to be fully realized, mechanistic insight and structural optimization of size and PL should be established. Insight from single QD resolution atomic structure and photophysical correlative studies provides a direct course to synthetically tune QDs to match these challenging environments.

Suppressed Magnitude of Spectral Diffusion in Cube-Shaped CdSe/CdS Core/Shell Nanocrystals with Exceedingly Stable Photoluminescence

Colloidal semiconductor nanocrystals are promising candidates for quantum light sources, yet their application has been impeded by photoluminescence instability due to blinking and spectral diffusion. This study introduces a new category of cube-shaped CdSe/CdS core/shell nanocrystals with exceptionally stable photoluminescence characteristics. Under continuous excitation, the emissive quantum state remained consistent without alterations of the charge state for 4000 s, and the average photon energy variation stayed within the bounds of spectral resolution throughout this extended duration. Systematic examination of single-nanocrystal photoluminescence, upon variation of the core and shell dimensions, revealed that a thicker CdS shell and increased core edge length significantly curtail spectral diffusion, considering that the nanocrystals possess well-controlled CdSe-CdS and facet-ligand interfaces. This study advances the optimization of colloidal semiconductor nanocrystals as high-performance quantum light sources.

Suppressed Auger recombination and enhanced emission of InP/ZnSe/ZnS quantum dots through inner shell manipulation

Understanding the influence of the inner shell on fluorescence blinking and exciton dynamics is essential to promote the optical performances of InP-based quantum dots (QDs). Here, the fluorescence blinking, exciton dynamics, second-order correlation function g2(τ), and ultrafast carrier dynamics of InP/ZnSe/ZnS QDs regulated by the inner ZnSe shell thickness varying from 2 to 7 monolayers (MLs) were systematically investigated. With an inner ZnSe shell thickness of 5 MLs, the photoluminescence quantum yield (PL QY) can reach 98% due to the suppressed blinking and increased probability of multiphoton emission. The exciton dynamics of InP/ZnSe/ZnS QDs with different inner shells indicates that two decay components of neural excitons and charged trions are competitive to affect the photon emission behavior. The probability density distributions of the ON and OFF state duration in the blinking traces demonstrate an effective manipulation of the inner ZnSe shell in the non-radiative processes via defect passivation. Accordingly, the radiative recombination dominates the exciton deactivation and the non-radiative Auger recombination rate is remarkably reduced, leading to a QY close to unity and a high PL stability for InP/ZnSe/ZnS QDs with 5 MLs of the ZnSe shell. These results provide insights into the photophysical mechanism of InP-based QDs and are significant for developing novel semiconductor PL core/shell QDs.

Probing the Fluorescence Intermittency of Bimetallic Nanoclusters using Single-Molecule Fluorescence Spectroscopy

Single-molecule spectroscopy (SMS) is a unique and competent technique to study molecule dynamics and sense biomolecules precisely. The design of an ultrahigh-stability single fluorophore probe with excellent photostability and long-lived dark transient states for single-molecule fluorescence microscopy is challenging. Here, we found that the photostability of bimetallic AuAg28 nanoclusters is better than monometallic Ag29 nanoclusters. The photon antibunching experiments unveiled exceptional brightness and remarkable photostability with high survival times of up to 218 s with minimal blinking. AuAg28 NCs exhibited longer "on" times and shorter "off" times as compared to Ag29 NCs. The statistical analysis was performed on at least 100 molecules that showed single-step photobleaching and almost a 5-fold enhancement in intensity on Au doping in Ag29 NCs. The distinctive and tunable photophysics of metal NCs can offer huge potential in pushing single-molecule dynamic measurements to be carried out biologically.

Optimizing ZnO-Quantum Dot Interface with Thiol as Ligand Modification for High-Performance Quantum Dot Light-Emitting Diodes

As the electron transport layer in quantum dot light-emitting diodes (QLEDs), ZnO suffers from excessive electrons that lead to luminescence quenching of the quantum dots (QDs) and charge-imbalance in QLEDs. Therefore, the interplay between ZnO and QDs requires an in-depth understanding. In this study, DFT and COSMOSL simulations are employed to investigate the effect of sulfur atoms on ZnO. Based on the simulations, thiol ligands (specifically 2-hydroxy-1-ethanethiol) to modify the ZnO nanocrystals are adopted. This modification alleviates the excess electrons without causing any additional issues in the charge injection in QLEDs. This modification strategy proves to be effective in improving the performance of red-emitting QLEDs, achieving an external quantum efficiency of over 23% and a remarkably long lifetime T95 of >12 000 h at 1000 cd m-2 . Importantly, the relationship between ZnO layers with different electronic properties and their effect on the adjacent QDs through a single QD measurement is investigated. These findings show that the ZnO surface defects and electronic properties can significantly impact the device performance, highlighting the importance of optimizing the ZnO-QD interface, and showcasing a promising ligand strategy for the development of highly efficient QLEDs.

Vertex-Oriented Cube-Connected Pattern in CsPbBr3 Perovskite Nanorods and Their Optical Properties: An Ensemble to Single-Particle Study

The design of cube-connected nanorods is accomplished by connecting seed nanocrystals of a defined shape in a particular orientation or by etching selective facets of preformed nanorods. In lead halide perovskite nanostructures, which retain mostly a hexahedron cube shape, such patterned nanorods can be designed with the anisotropic direction along the edge, vertex, or facet of seed cubes. Combining the Cs-sublattice platform for transforming metal halides to halide perovskites with facet-specific ligand binding chemistry, herein, vertex-oriented patterning of nanocubes in one-dimensional (1D) rod structures is reported. By tuning the length of host metal halides, their lengths could also be tuned from 100 nm to nearly 1000 nm. The symmetry of the hexagonal phase of host halide CsCdBr₃ and product orthorhombic CsPbBr₃ helped in maintaining the vertex [201] as the anisotropic direction. Neutral exciton recombination rates, extracted from photoluminescence blinking traces, showed a systematic increase from isolated cubes to cube-connected nanorods of various lengths. Efficient coupling of wave functions in vertex-oriented cube assemblies permits exciton delocalization. Our findings on carrier delocalization in cube-connected nanorods along their vertex direction having minimum interfacial contacts provide valuable insights into the fundamental chemistry of assembling anisotropic halide perovskite nanostructures as conducting wires.

Design Rules for Obtaining Narrow Luminescence from Semiconductors Made in Solution

Solution-processed semiconductors are in demand for present and next-generation optoelectronic technologies ranging from displays to quantum light sources because of their scalability and ease of integration into devices with diverse form factors. One of the central requirements for semiconductors used in these applications is a narrow photoluminescence (PL) line width. Narrow emission line widths are needed to ensure both color and single-photon purity, raising the question of what design rules are needed to obtain narrow emission from semiconductors made in solution. In this review, we first examine the requirements for colloidal emitters for a variety of applications including light-emitting diodes, photodetectors, lasers, and quantum information science. Next, we will delve into the sources of spectral broadening, including "homogeneous" broadening from dynamical broadening mechanisms in single-particle spectra, heterogeneous broadening from static structural differences in ensemble spectra, and spectral diffusion. Then, we compare the current state of the art in terms of emission line width for a variety of colloidal materials including II-VI quantum dots (QDs) and nanoplatelets, III-V QDs, alloyed QDs, metal-halide perovskites including nanocrystals and 2D structures, doped nanocrystals, and, finally, as a point of comparison, organic molecules. We end with some conclusions and connections, including an outline of promising paths forward.

Biexciton Blinking in CdSe-Based Quantum Dots

Experiments on single colloidal quantum dots (QDs) have revealed temporal fluctuations in the emission efficiency of the single-exciton state. These fluctuations, often termed "blinking", are caused by opening/closing of charge-carrier traps and/or charging/discharging of the QD. In the regime of strong optical excitation, multiexciton states are formed. The emission efficiencies of multiexcitons are lower because of Auger processes, but a quantitative characterization is challenging. Here, we quantify fluctuations of the biexciton efficiency for single CdSe/CdS/ZnS core-shell QDs. We find that the biexciton efficiency "blinks" significantly. The additional electron due to charging of a QD accelerates Auger recombination by a factor of 2 compared to the neutral biexciton, while opening/closing of a charge-carrier trap leads to an increase of the nonradiative recombination rate by a factor of 4. To understand the fast rate of trap-assisted recombination, we propose a revised model for trap-assisted recombination based on reversible trapping. Finally, we discuss the implications of biexciton blinking for lasing applications.

Photoinduced interfacial electron transfer from perovskite quantum dots to molecular acceptors for solar cells

Bandgap-engineered inorganic and hybrid halide perovskite (HP) films, nanocrystals, and quantum dots (PQDs) are promising for solar cells. Fluctuations of photoinduced electron transfer (PET) rates affect the interfacial charge separation efficiencies of such solar cells. Electron donor- or acceptor-doped perovskite samples help analyze PET and harvest photogenerated charge carriers efficiently. Therefore, PET in perovskite-based donor-acceptor (D-A) systems has received considerable attention. We analyzed the fluctuations of interfacial PET from MAPbBr₃ or CsPbBr₃ PQDs to classical electron acceptors such as 7,7,8,8-tetracyanoquinodimethane (TCNQ) and 1,2,4,5-tetracyanobenzene (TCNB) at single-particle and ensemble levels. The significantly negative Gibbs free energy changes of PET estimated from the donor-acceptor redox potentials, the donor-acceptor sizes, and the solvent dielectric properties help us clarify the PET in the above D-A systems. The dynamic nature of PET is apparent from the decrease in photoluminescence (PL) lifetimes and PL photocounts of PQDs with an increase in the acceptor concentrations. Also, the acceptor radical anion spectrum helps us characterize the charge-separated states. Furthermore, the PL blinking time and PET rate fluctuations (10⁸ to 10⁷ s^-1) provide us with single-molecule level information about interfacial PET in perovskites.

The trajectory patterns of single HIV-1 virus-like particle in live CD4 cells: A real time three-dimensional multi-resolution microscopy study using encapsulated nonblinking giant quantum dot

BACKGROUND

The exploration of virology knowledge was limited by the optical technology for the observation of virus. Previously, a three-dimensional multi-resolution real-time microscope system (3D-MRM) was developed to observe the uptake of HIV-1-tat peptide-modified nanoparticles in cell membrane. In this study, we labeled HIV-1 virus-like particles (VLPs) with passivated giant quantum dots (gQDs) and recorded their interactive trajectories with human Jurkat CD4 cells through 3D-MRM.

METHODS

The labeled of gQDs of the HIV-1 VLPs in sucrose-gradient purified viral lysates was first confirmed by Cryo-electronic microscopy and Western blot assay. After the infection with CD4 cells, the gQD-labeled VLPs were visualized and their extracellular and intracellular trajectories were recorded by 3D-MRM.

RESULTS

A total of 208 prime trajectories was identified and classified into three distinct patterns: cell-free random diffusion pattern, directional movement pattern and cell-associated movement pattern, with distributions and mean durations were 72.6%/87.6 s, 9.1%/402.7 s and 18.3%/68.7 s, respectively. Further analysis of the spatial-temporal relationship between VLP trajectories and CD4 cells revealed the three stages of interactions: (1) cell-associated (extracellular) diffusion stage, (2) cell membrane surfing stage and (3) intracellular directional movement stage.

CONCLUSION

A complete trajectory of HIV-1 VLP interacting with CD4 cells was presented in animation. This encapsulating method could increase the accuracy for the observation of HIV-1-CD4 cell interaction in real time and three dimensions.

Correlative light-electron microscopy using small gold nanoparticles as single probes

Correlative light-electron microscopy (CLEM) requires the availability of robust probes which are visible both in light and electron microscopy. Here we demonstrate a CLEM approach using small gold nanoparticles as a single probe. Individual gold nanoparticles bound to the epidermal growth factor protein were located with nanometric precision background-free in human cancer cells by light microscopy using resonant four-wave mixing (FWM), and were correlatively mapped with high accuracy to the corresponding transmission electron microscopy images. We used nanoparticles of 10 nm and 5 nm radius, and show a correlation accuracy below 60 nm over an area larger than 10 µm size, without the need for additional fiducial markers. Correlation accuracy was improved to below 40 nm by reducing systematic errors, while the localisation precision is below 10 nm. Polarisation-resolved FWM correlates with nanoparticle shapes, promising for multiplexing by shape recognition in future applications. Owing to the photostability of gold nanoparticles and the applicability of FWM microscopy to living cells, FWM-CLEM opens up a powerful alternative to fluorescence-based methods.

Intricate Reaction Pathways on CH3NH3PbI3 Photocatalysts in Aqueous Solution Unraveled by Single-Particle Spectroscopy

Organic-inorganic hybrid perovskites such as MAPbI₃ (MA⁺ = CH₃NH₃⁺) have emerged as promising materials for solar cells and light-emitting devices. Despite their poor stability against moisture, perovskites work as hydrogen-producing photocatalysts or photosensitizers in perovskite-saturated aqueous solutions. However, the fundamental understanding of how chemical species or support materials in the solution affect the dynamics of the photogenerated charges in perovskites is still insufficient. In this study, we investigated the photoluminescence (PL) properties of MAPbI₃ nanoparticles in aqueous media at the single-particle level. A remarkable PL blinking phenomenon, along with significant decreases in the PL intensity and lifetime compared to those in ambient air, suggested temporal fluctuations in the trapping rates of photogenerated holes by chemical species (I^- and H₃PO₂) in the solution. Moreover, electron transfer from the excited MAPbI₃ to Pt-modified TiO₂ proceeds in a concerted fashion for photocatalytic hydrogen evolution under the dynamic solid-solution equilibrium condition.

Electronic Structure and Excited State Dynamics of Cadmium Chalcogenide Nanorods

The cylindrical quasi-one-dimensional shape of colloidal semiconductor nanorods (NRs) gives them unique electronic structure and optical properties. In addition to the band gap tunability common to nanocrystals, NRs have polarized light absorption and emission and high molar absorptivities. NR-shaped heterostructures feature control of electron and hole locations as well as light emission energy and efficiency. We comprehensively review the electronic structure and optical properties of Cd-chalcogenide NRs and NR heterostructures (e.g., CdSe/CdS dot-in-rods, CdSe/ZnS rod-in-rods), which have been widely investigated over the last two decades due in part to promising optoelectronic applications. We start by describing methods for synthesizing these colloidal NRs. We then detail the electronic structure of single-component and heterostructure NRs and follow with a discussion of light absorption and emission in these materials. Next, we describe the excited state dynamics of these NRs, including carrier cooling, carrier and exciton migration, radiative and nonradiative recombination, multiexciton generation and dynamics, and processes that involve trapped carriers. Finally, we describe charge transfer from photoexcited NRs and connect the dynamics of these processes with light-driven chemistry. We end with an outlook that highlights some of the outstanding questions about the excited state properties of Cd-chalcogenide NRs.

A nanophotonic interferometer

The transmission of light through sub-wavelength apertures (zero-mode waveguides, ZMW) in metal films is well-explored. It introduces both an amplitude modulation as well as a phase shift to the oscillating electromagnetic field. We propose a nanophotonic interferometer by bringing two ZMW (∼100 nm diameter) in proximity and monitoring the distribution of transmitted light in the back-focal plane of collecting microscope objective (1.3 N.A.). We demonstrate that both an asymmetry induced by the binding of a quantum dot in one of the two ZMW, as well as an asymmetry in ZMW diameter yield qualitatively similar transmission patterns. We find that the complex pattern can be quantified through a scalar measure of asymmetry along the symmetry axis of the aperture pair. In a combined experimental and computational exploration of detectors with differing ZMW diameters, we find that the scalar asymmetry is a monotonous function of the diameter difference of the two apertures, and that the scalar asymmetry measure is higher if the sample is slightly displaced from the focal plane of the collecting microscope objective. An optimization of the detector geometry determined that the maximum response is achieved at an aperture separation that is comparable to the wavelength on the exit side of the sensor. For small separations of apertures, on the order of a quarter of the wavelength and less, the signal is strongly polarization dependent, while for larger separations, on the order of the wavelength or larger, the signal becomes essentially polarization-independent.

It Is a Trap!: The Effect of Self-Healing of Surface Defects on the Excited States of CdSe Nanocrystals

Colloidal semiconductor nanocrystals have attracted much interest due to their unique optical properties, with applications ranging from displays to biomedical imaging. Nanocrystal optical properties depend on the structure of the surface, where defects can lead to traps. CdSe nanocrystals undergo surface reorganization, or self-healing, to eliminate defects, removing midgap traps from the band structure. However, the effect of this process on the optical spectrum is not well studied. Here, we show that self-healing not only eliminates midgap traps from the band structure but also brightens the spectrum and causes the excitonic states to emerge as the dominant features, in agreement with experimental annealing studies. We find that self-healing can lead to new traps like bonded Se-Se or Cd-Cd dimers, and their behavior is different from that of undercoordinated atom traps. These results suggest that eliminating traps requires a balance of allowing enough surface reorganization to eliminate undercoordinated atoms, but not so much that dimeric traps form.

Far Red-Shifted CdTe Quantum Dots for Multicolour Stimulated Emission Depletion Nanoscopy

Stimulated emission depletion (STED) nanoscopy is a widely used nanoscopy technique. Two-colour STED imaging in fixed and living cells is standardised today utilising both fluorescent dyes and fluorescent proteins. Solutions to image additional colours have been demonstrated using spectral unmixing, photobleaching steps, or long-Stokes-shift dyes. However, these approaches often compromise speed, spatial resolution, and image quality, and increase complexity. Here, we present multicolour STED nanoscopy with far red-shifted semiconductor CdTe quantum dots (QDs). STED imaging of the QDs is optimized to minimize blinking effects and maximize the number of detected photons. The far-red and compact emission spectra of the investigated QDs free spectral space for the simultaneous use of fluorescent dyes, enabling straightforward three-colour STED imaging with a single depletion beam. We use our method to study the internalization of QDs in cells, opening up the way for future super-resolution studies of particle uptake and internalization.

Spectroelectrochemistry of CdSe/CdxZn1-xS Nanoplatelets

We report an unexpected enhancement of photoluminescence (PL) in CdSe-based core/shell nanoplatelets (NPLs) upon electrochemical hole injection. Moderate hole doping densities induce an enhancement of more than 50% in PL intensity. This is accompanied by a narrowing and blue-shift of the PL spectrum. Simultaneous, time-resolved PL experiments reveal a slower luminescence decay. Such hole-induced PL brightening in NPLs is in stark contrast to the usual observation of PL quenching of CdSe-based quantum dots following hole injection. We propose that hole injection removes surface traps responsible for the formation of negative trions, thereby blocking nonradiative Auger processes. Continuous photoexcitation causes the enhanced PL intensity to decrease back to its initial level, indicating that photocharging is a key step leading to loss of PL luminescence during normal aging. Modulating the potential can be used to reversibly enhance or quench the PL, which enables electro-optical switching.

Parabolic Potential Surfaces Localize Charge Carriers in Nonblinking Long-Lifetime "Giant" Colloidal Quantum Dots

Materials for studying biological interactions and for alternative energy applications are continuously under development. Semiconductor quantum dots are a major part of this landscape due to their tunable optoelectronic properties. Size-dependent quantum confinement effects have been utilized to create materials with tunable bandgaps and Auger recombination rates. Other mechanisms of electronic structural control are under investigation as not all of a material's characteristics are affected by quantum confinement. Demonstrated here is a new structure-property concept that imparts the ability to spatially localize electrons or holes within a core/shell heterostructure by tuning the charge carrier's kinetic energy on a parabolic potential energy surface. This charge carrier separation results in extended radiative lifetimes and in continuous emission at the single-nanoparticle level. These properties enable new applications for optics, facilitate novel approaches such as time-gated single-particle imaging, and create inroads for the development of other new advanced materials.

Bioimaging with Upconversion Nanoparticles

Bioimaging enables the spatiotemporal visualization of biological processes at various scales empowered by a range of different imaging modalities and contrast agents. Upconversion nanoparticles (UCNPs) represent a distinct type of such contrast agents with the potential to transform bioimaging due to their unique optical properties and functional design flexibilities. This review explores and discusses the opportunities, challenges, and limitations that UCNPs exhibit as bioimaging probes and highlights applications with spatial dimensions ranging from the single nanoparticle level to cellular, tissue, and whole animal imaging. We further summarized recent advancements in bioimaging applications enabled by UCNPs, including super-resolution techniques and multimodal imaging methods, and provide a perspective on the future potential of UCNP-based technologies in bioimaging research and clinical translation. This review may provide a valuable resource for researchers interested in exploring and applying UCNP-based bioimaging technologies.

Moisture-Dependent Blinking of Individual CsPbBr3 Nanocrystals Revealed by Single-Particle Spectroscopy

All-inorganic metal halide perovskite nanocrystals (NCs) have been exceptional candidates for high-performance solution-processed optoelectronic and photonic devices compared with organometal halide perovskite NCs due to their superior stability. However, the interactions between all-inorganic perovskite NCs and moisture, which is an acknowledged detrimental factor, are still under debate, and detailed investigations to uncover such fundamentals remain to be performed. Herein, with wide-field fluorescence microscopy, the burst photoluminescence blinking responses of CsPbBr₃ NCs were observed in ambient air, and moisture rather than oxygen was verified to be the key factor that leads to the enhanced PL intensity and reduced OFF duration. This behavior is rationalized through an effective passivation effect of the adsorbed water molecules on the surface halide vacancies on CsPbBr₃ NCs. This work validates that ∼40% humidity atmospheres are helpful for better utilizing the all-inorganic perovskites, which is evidence of their promising prospect for application.

Absolute Counting Method with Multiplexing Capability for Estimating the Number Concentration of Nanoparticles Using Anisotropically Collapsed Gels

Number concentration─the number of nanoparticles in a given volume─is an important characteristic of any nanoparticle dispersion. However, its estimation for small nanoparticles (∼30 nm) is generally challenging. We introduce an absolute and widely applicable method for analyzing aqueous dispersions of nanoparticles. An innovative immobilization of nanomaterials in the anisotropically collapsed agarose gel is pioneered, followed by optical microscopy and nanoparticle counting. The number of counted nanoparticles is inherently coupled with sampled volume (517 pL) and translates to the number concentration. Photon-upconversion, fluorescence, bright-field, and dark-field microscopy techniques have been proven applicable and used for imaging lanthanide-doped photon-upconversion nanoparticles, their bioconjugates with antibodies, silica dye-doped fluorescent nanoparticles, quantum dots, and pure silica submicron particles. The precision and linearity were characterized by constructing a dilution series of photon-upconversion nanoparticles. The limit of detection was 2.0 × 10⁶ mL^-1, and the working range was from 4.4 × 10⁷ to 2.2 × 10¹⁰ mL^-1. The quantification of nanoparticle clusters was achieved by a thorough analysis of the micrographs. The accuracy was confirmed using gravimetric analysis and transmission electron microscopy as a reference. Multiplexed detection of two nanoparticle types in a mixed dispersion was feasibly demonstrated. The low thickness of the collapsed gel (<1 μm) supported extremely sensitive imaging. This was proven by imaging Tm³⁺-doped photon-upconversion nanoparticles (17 nm hydrodynamic diameter) with a nanoparticle emission rate of only ∼900 photons/s at a wavelength of 800 nm (excitation wavelength 976 nm).

High-resolution imaging of protein secretion at the single-cell level using plasmon-enhanced FluoroDOT assay

Secreted proteins mediate essential physiological processes. With conventional assays, it is challenging to map the spatial distribution of proteins secreted by single cells, to study cell-to-cell heterogeneity in secretion, or to detect proteins of low abundance or incipient secretion. Here, we introduce the "FluoroDOT assay," which uses an ultrabright nanoparticle plasmonic-fluor that enables high-resolution imaging of protein secretion. We find that plasmonic-fluors are 16,000-fold brighter, with nearly 30-fold higher signal-to-noise compared with conventional fluorescence labels. We demonstrate high-resolution imaging of different secreted cytokines in the single-plexed and spectrally multiplexed FluoroDOT assay that revealed cellular heterogeneity in secretion of multiple proteins simultaneously. Using diverse biochemical stimuli, including Mycobacterium tuberculosis infection, and a variety of immune cells such as macrophages, dendritic cells (DCs), and DC-T cell co-culture, we demonstrate that the assay is versatile, facile, and widely adaptable for enhancing biological understanding of spatial and temporal dynamics of single-cell secretome.

Fluorescent Nanoparticles for Super-Resolution Imaging

Super-resolution imaging techniques that overcome the diffraction limit of light have gained wide popularity for visualizing cellular structures with nanometric resolution. Following the pace of hardware developments, the availability of new fluorescent probes with superior properties is becoming ever more important. In this context, fluorescent nanoparticles (NPs) have attracted increasing attention as bright and photostable probes that address many shortcomings of traditional fluorescent probes. The use of NPs for super-resolution imaging is a recent development and this provides the focus for the current review. We give an overview of different super-resolution methods and discuss their demands on the properties of fluorescent NPs. We then review in detail the features, strengths, and weaknesses of each NP class to support these applications and provide examples from their utilization in various biological systems. Moreover, we provide an outlook on the future of the field and opportunities in material science for the development of probes for multiplexed subcellular imaging with nanometric resolution.

Memory in quantum dot blinking

The photoluminescence intermittency (blinking) of quantum dots is interesting because it is an easily measured quantum process whose transition statistics cannot be explained by Fermi's golden rule. Commonly, the transition statistics are power-law distributed, implying that quantum dots possess at least trivial memories. By investigating the temporal correlations in the blinking data, we demonstrate with high statistical confidence that there is nontrivial memory between the on and off brightness duration data of blinking quantum dots. We define nontrivial memory to be statistical complexity greater than one. We show that this memory cannot be discovered using the transition distribution. We show by simulation that this memory does not arise from standard data manipulations. Finally, we conclude that at least three physical mechanisms can explain the measured nontrivial memory: (1) storage of state information in the chemical structure of a quantum dot; (2) the existence of more than two intensity levels in a quantum dot; and (3) the overlap in the intensity distributions of the quantum dot states, which arises from fundamental photon statistics.

Toward dynamic, anisotropic, high-resolution, and functional measurement in the brain extracellular space

Diffusion of substances in the brain extracellular space (ECS) is important for extrasynaptic communication, extracellular ionic homeostasis, drug delivery, and metabolic waste clearance. However, substance diffusion is largely constrained by the geometry of brain ECS and the extracellular matrix. Investigating the diffusion properties of substances not only reveals the structural information of the brain ECS but also advances the understanding of intercellular signaling of brain cells. Among different techniques for substance diffusion measurement, the optical imaging method is sensitive and straightforward for measuring the dynamics and distribution of fluorescent molecules or sensors and has been used for molecular diffusion measurement in the brain. We mainly discuss recent advances of optical imaging-enabled measurements toward dynamic, anisotropic, high-resolution, and functional aspects of the brain ECS diffusion within the last 5 to 10 years. These developments are made possible by advanced imaging, such as light-sheet microscopy and single-particle tracking in tissue, and new fluorescent biosensors for neurotransmitters. We envision future efforts to map the ECS diffusivity across the brain under healthy and diseased conditions to guide the therapeutic delivery and better understand neurochemical transmissions that are relevant to physiological signaling and functions in brain circuits.

Phase-Stable and Highly Luminescent CsPbI3 Perovskite Nanocrystals with Suppressed Photoluminescence Blinking

Despite their low band gap, the utility of CsPbI₃ nanocrystals (NCs) in solar photovoltaic and optoelectronic applications is rather limited because of their phase instability and photoluminescence (PL) intermittency. Herein we show that phase-pure, monodispersed, stable and highly luminescent CsPbI₃ NCs can be obtained by tweaking the conventional hot-injection method employing NH₄I as an additional precursor. Single-particle studies show a significant suppression of PL blinking. Among all NCs studied, 60% exhibit only high-intensity ON states with a narrow distribution of intensity. The remaining 40% of NCs exhibit a much wider distribution of PL intensity with a significant contribution of low-intensity OFF states. Excellent characteristics of these CsPbI₃ NCs are shown to be the result of NH₄⁺ replacing some surface Cs⁺ of an iodide-rich surface of the NCs. These phase-stable and highly luminescent CsPbI₃ NCs with significantly suppressed PL blinking can be useful single-photon emitters and promising materials for optoelectronic and solar photovoltaic applications.

Nanophotonic Approach to Study Excited-State Dynamics in Semiconductor Nanocrystals

In semiconductor nanocrystals, excited electrons relax through multiple radiative and nonradiative pathways. This complexity complicates characterization of their decay processes with standard time- and temperature-dependent photoluminescence studies. Here, we exploit a simple nanophotonic approach to augment such measurements and to address open questions related to nanocrystal emission. We place nanocrystals at different distances from a gold reflector to affect radiative rates through variations in the local density of optical states. We apply this approach to spherical CdSe-based nanocrystals to probe the radiative efficiency and polarization properties of the lowest dark and bright excitons by analyzing temperature-dependent emission dynamics. For CdSe-based nanoplatelets, we identify the charge-carrier trapping mechanism responsible for strongly delayed emission. Our method, when combined with careful modeling of the influence of the nanophotonic environment on the relaxation dynamics, offers a versatile strategy to disentangle the complex excited-state decay pathways present in fluorescent nanocrystals as well as other emitters.

Size Engineering of Trap Effects in Oxidized and Hydroxylated ZnSe Quantum Dots

Environmentally friendly blue-emitting ZnSe quantum dots (QDs) are in high demand for next-generation light-emitting devices. Yet, they suffer longstanding optical instability issues under aerobic conditions. Herein, we have demonstrated the existence of oxidization or hydroxylation on the QD surface when QDs are subjected to oxygen exposure, which potentially introduces highly localized in-gap states. Those states result in a dense number of surface-related, weak-intensity "dark" exciton states at the emission edge. Remarkably, there exists a critical diameter (D_c ≈ 8.5 nm) at which the deepest trap level reaches resonance with the highest occupied molecular orbital state. Beyond this critical diameter, the effects of those trap states are minimized, and the emission edge is dominated by high-intensity, bulk-to-bulk-like "bright" exciton states. The present work provides a novel strategy for designing highly stable QD emitters via size engineering, which are broadly applicable to other closely related QD systems.

Anomalous Emission Shift of CdSe/CdS/ZnS Quantum Dots at Cryogenic Temperatures

The band-gap energy of most bulk semiconductors tends to increase as the temperature decreases. However, non-monotonic temperature dependence of the emission energy has been observed in semiconductor quantum dots (QDs) at cryogenic temperatures. Here, using stable and highly efficient CdSe/CdS/ZnS QDs as the model system, we quantitatively reveal the origins of the anomalous emission red-shift (∼8 meV) below 40 K by correlating ensemble and single QD spectroscopy measurements. About one-quarter of the anomalous red-shift (∼2.2 meV) is caused by the temperature-dependent population of the band-edge exciton fine levels. The enhancement of electron-optical phonon coupling caused by the increasing population of dark excitons with temperature decreases contributes an ∼3.4 meV red-shift. The remaining ∼2.4 meV red-shift is attributed to temperature-dependent electron-acoustic phonon coupling.

Time- and Spectrally-Resolved Photoluminescence Study of Alloyed CdxZn1-xSeyS1-y/ZnS Quantum Dots and Their Nanocomposites with SPIONs in Living Cells

Magnetic-luminescent composites based on semiconductor quantum dots (QDs) and superparamagnetic iron oxide nanoparticles (SPIONs) can serve as a platform combining visualization and therapy. Here, we report the construction of QD-SPION nanocomposites based on synthesized SPIONs and alloyed QDs (CdxZn1−xSeyS1−y)/ZnS solubilized with L-cysteine molecules. The study of the spectral-luminescence characteristics, the kinetics of luminescence decay show the composite’s stability in a solution. After incubation with HeLa cells, QDs, SPIONs, and their composites form clusters on the cell surface and associate with endosomes inside the cells. Component-wise analysis of the photoluminescence decay of cell-associated QDs/SPIONs provides information about their localization and aggregate status.

Nonblinking Colloidal Quantum Dots via Efficient Multiexciton Emission

Nonblinking colloidal quantum dots (QDs) are significant to their applications as single-photon sources or light-emitting materials. Herein, a simple heat-up method was developed to synthesize high-qualityWZ-CdSe/CdS core-shell colloidal QDs, which achieved a near-unity photoluminescence quantum yield (PLQY). It was found that the blinking behavior of such QDs was completely suppressed at high excitation intensities, and ultra-stable PL emission was observed. For this reason, a systematic investigation was conducted, revealing that the complete blinking suppression was attributed mainly to the efficient multiexciton emission at high excitation intensities. Such high-quality QDs with nonblinking behaviors and nearly ideal PL properties at high excitation intensities have massive potential applications in various robust conditions, including QD display screens, single-particle tracks, and single-photon sources.

Suppressed Blinking and Polarization-Dependent Emission Enhancement of Single ZnCdSe/ZnS Dot Coupled with Au Nanorods

Fluorescent quantum dots (QDs) have attracted extensive attention because of their promising applications in many fields such as quantum optics, optoelectronics, solid-state lighting, and bioimaging. However, photo-blinking, low emission efficiency, and instability are the drawbacks of fluorescent QD-based devices, affecting their optical properties and practical applications. Here, we report suppressed blinking, enhanced radiative rate, and polarization-dependent emission properties of single ZnCdSe/ZnS QDs assembled on the surface of Au nanorods (NRs). We found that the local surface plasmon (LSP) of Au NRs significantly regulates the excitation and emission properties of the composite ZnCdSe/ZnS QD-Au NRs (QD-Au NRs). The average number of photons emitted per unit time from single QD-Au NRs has been significantly enhanced compared with that of single ZnCdSe/ZnS QDs on the coverslip, accompanied by a drastically shortened lifetime and suppressed blinking. According to the experimental and simulation analysis, the photogenerated LSP field of Au NRs remarkably increases the excitation transition and the radiative rates of QD-Au NRs. Although the emission efficiency is slightly increased, the synergetic enhancement of excitation and radiative rates sufficiently competes with the nonradiative process to compensate for the low emission efficiency of QDs and ultimately suppress the photo-blinking of QD-Au NRs. Moreover, the polarization-dependent emission enhancement has also been observed and theoretically analyzed, demonstrating good consistency and confirming the contribution of excitation enhancement. Our findings present a practical strategy to improve the optical properties and stability of single QD-Au NR composite and provide essential information for a deep understanding of the interaction between emitters and the LSP field of metal nanoparticles.

Tuning Hot Carrier Dynamics of InP/ZnSe/ZnS Quantum Dots by Shell Morphology Control

Isotropic InP/ZnSe/ZnS quantum dots (QDs) are prepared at a high reaction temperature, which facilitates ZnSe shell growth on random facets of the InP core. Fast crystal growth enables stacking faults elimination, which induces anisotropic growth, and as a result, improves the photoluminescence (PL) quantum yield by nearly 20%. Herein, the effect of the QD morphology on photophysical properties is investigated by observing the PL blinking and ultrafast charge carrier dynamics. It is found that hot hole trapping is considerably suppressed in isotropic InP QDs, indicating that the stacking faults in the anisotropic InP/ZnSe structures act as defects for luminescence. These results highlight the importance of understanding the correlation between QD shapes and hot carrier dynamics, and present a way to design highly luminescent QDs for further promising display applications.

Photostable fluorescent molecules on layered hexagonal boron nitride: Ideal single-photon sources at room temperature

Photoblinking and photobleaching are commonly encountered problems for single-photon sources. Numerous methods have been devised to suppress these two impediments; however, either the preparation procedures or the operating conditions are relatively harsh, making them difficult to apply to practical applications. Here, we reported giant suppression of both photoblinking and photobleaching of a single fluorescent molecule, terrylene, via the utilization of hexagonal boron nitride (h-BN) flakes as substrates. Experimentally, a much-prolonged survival time of terrylene has been determined, which can have a photostable emission over 2 h at room temperature under ambient atmospheres. Compared with single molecules on a SiO₂/Si substrate or glass coverslip, a more than 100-fold increase in the total number of photons collected from each terrylene on h-BN flakes has been demonstrated. We also proved that the photostability of terrylene molecules can be well maintained for more than 6 months even under ambient conditions without any further protection. Our results demonstrate that the utilization of h-BN flakes to suppress photoblinking and photobleaching of fluorescent molecules has promising applications in the production of high-quality single-photon sources at room temperature.

Non-excitonic defect-assisted radiative transitions are responsible for new D-type blinking in ternary quantum dots

This work addresses the issue of dark states formation in QDs by cooperative excitonic and intrinsic defect-assisted radiative transitions. Here we refer to the observed blinking as D-type to distinguish it from purely excitonic types. It is shown experimentally that defect-assisted radiative relaxations in a single I-III-VI QD result in atypical blinking characteristics that cannot be explained on the basis of charged exciton models. In addition to the excitonic channel, it has been proposed that defect-assisted kinetics can also form blinking patterns. Two conditions for the formation of dark states have been identified which are related to correlation and competition when considering photons emitted from bright defects. Two transition schemes have therefore been proposed. The first transition scheme includes time-correlated trapping of more than one electron at a single trap centre. This is used to simulate variations in the defect's charge state and switching between radiative/nonradiative transitions. The latter scheme, on the other hand, involves uncorrelated trapping and radiative relaxations from two different types of defects (competition). Both schemes are seen to play an equal role in radiative processes in I-III-VI QDs. Considered together, the proposed models can reflect the experimental data with very good accuracy, providing a better understanding of the underlying physics. An important implication of these schemes is that dark states formation doesn't have to be limited to mechanisms that involve charged excitons, and it may also be observed for independent defect assisted kinetics. This is especially valid for highly defected or multinary QDs.

Water Effects on Colloidal Semiconductor Nanocrystals: Correlation of Photophysics and Photochemistry

With high-quality CdSe/CdS core/shell nanocrystals as the main model system and under a controlled atmosphere, responses of photoexcited semiconductor nanocrystals to two active species (water and/or oxygen) in an ambient environment are studied systematically. Under photoexcitation, although high-quality semiconductor nanocrystals in either thin solid films or various solutions have a near-unity photoluminescence quantum yield, there is still a small probability (∼10^-5 per photon absorbed) to be photoreduced by the water molecules efficiently accumulated in the highly hydrophilic nanocrystal-ligands interface. The resulting negatively charged nanocrystals are the starting point of most photophysical variations, and the hydroxyl radical─key photo-oxidation product of water─plays the main role for initiating various photochemical processes. Depending on the supplementation of water to the interface, accessibility to oxygen, photoirradiation power, type of matrices, type of measurement schemes, and solubility of nanocrystals in the solution, various photophysical/photochemical phenomena─either reported or not reported in the literature─are reproducibly observed. Results confirm that photophysical properties and photochemical reactions can be well-correlated, offering a unified and unique basis for fundamental studies and the design of processing techniques in industry.

Enhanced Emission from Bright Excitons in Asymmetrically Strained Colloidal CdSe/CdxZn1-xSe Quantum Dots

Colloidal CdSe quantum dots (QDs) designed with a high degree of asymmetric internal strain have recently been shown to host a number of desirable optical properties including subthermal room-temperature line widths, suppressed spectral diffusion, and high photoluminescence (PL) quantum yields. It remains an open question, however, whether they are well-suited for applications requiring emission of identical single photons. Here we measure the low-temperature PL dynamics and the polarization-resolved fluorescence line narrowing spectra from ensembles of these strained QDs. Our spectroscopy reveals the radiative recombination rates of bright and dark excitons, the relaxation rate between the two, and the energy spectra of the quantized acoustic phonons in the QDs that can contribute to relaxation processes. In comparison to conventional colloidal CdSe/ZnS core/shell QDs, we find that in asymmetrically strained CdSe QDs over six times more light is emitted directly by the bright exciton. These results are therefore encouraging for the prospects of chemically synthesized colloidal QDs as emitters of single indistinguishable photons.