Inversion of Circularly Polarized Luminescence of Nanofibrous Hydrogels through Co-assembly with Achiral Coumarin Derivatives

Fluorescence-Selective Absorption and Circularly Polarized Fluorescence Energy Transfer Assist the Generation of Multicolor Circularly Polarized Luminescence in Chiral Helical Polyacetylene-Based Janus Nanofibers

Chiroptical nanomaterials with circularly polarized luminescence (CPL) performance have aroused increasing attention. Herein, multicolor CPL-active Janus nanofibers are prepared through a simple parallel electrospinning method using chiral helical polyacetylenes as the chiral source and achiral fluorophores as the fluorescent source. Interestingly, despite a direct spatial isolation between the chiral component and the fluorescent component, blue and green CPL emissions can still be obtained due to the fluorescence-selective absorption behavior of chiral helical polyacetylenes, with a satisfactory dissymmetric factor (glum) of 2 × 10-2 and 2.5 × 10-3, respectively. Moreover, by taking advantage of the circular polarization fluorescence energy transfer process, red CPL emission is further achieved using the obtained blue and green CPL as energy donors and the achiral red fluorophore as an energy acceptor. The present work offers a facile approach to prepare multilevel-structured chiroptical materials with promising application potentials in a flexible photoelectric device.

A sodium carboxymethyl cellulose-induced emission and gelation system for time-dependent information encryption and anti-counterfeiting

Many lanthanide complexes do not form gel or even exhibit characteristic luminescence of lanthanide ions, which limits their applications in many fields. Therefore, there is an urgent need for a third component that can not only promote emission but also gel the lanthanide complex system to construct new smart materials such as time-dependent information encryption and anti-counterfeiting materials. Herein, a luminescent lanthanide metallogel was successfully prepared by using the third component sodium carboxymethyl cellulose (NaCMC) to induce the gelation and luminescence of the complex (H3L/Tb3+) of 4,4',4″-((benzene-1,3,5-tricarbonyl)tris(azanediyl)) tris(2-hydroxybenzoic acid) (H3L) and Tb3+. The H3L/Tb3+ complex itself does not form gel and has no characteristic luminescence of Tb3+. Moreover, the multicolor emission of H3L/Tb3+/NaCMC gels was prepared based on Förster resonance energy transfer (FRET) platforms to obtain a high-security level information encryption and anti-counterfeiting materials. These multicolor emission gels exhibit emission color tunability with time dependence due to the different energy transfer efficiencies at each pH node controlled by glucono-δ-lactone hydrolysis time. Based on the time response characteristics, the time-dependent information encryption and anti-counterfeiting materials are developed.

Self-Assembled Pure Covalent Tubes Exhibiting Circularly Polarized Luminescence

Here, we successfully synthesized four structurally analogous, self-assembled chiral molecular tubes with relatively high yields. This achievement involved the condensation of six equivalents of enantiomerically pure trans-cyclohexane-1,2-diamine (trans-CHDA) and three equivalents of the corresponding tetraformyl precursor. Each precursor was equipped with a luminescent linker terminated by two m-phthalaldehyde units. Even though these tetraformyl precursors are barely soluble in almost all organic solvents, the molecular tubes are highly soluble in nonpolar solvents such as chloroform, allowing us to fully characterize them in solution. The stereo-chirality of the chiral bisamino building blocks endows the frameworks of molecular tubes with planar chirality. As a consequence, all of these molecular tubes exhibit circularly polarized luminescence (CPL) with relatively large dissymmetry values |glum| up to 7×10-3, providing an efficient method for synthesizing CPL-active materials.

Achiral substituent- and stoichiometry-controlled inversion of supramolecular chirality and circularly polarized luminescence in ternary co-assemblies

Handedness inversion of supramolecular chirality and circularly polarized luminescence (CPL) in assembled systems containing more than two components with higher complexity is of prominent importance to simulate biological multicomponent species and design advanced chiral materials, but it remains a considerable challenge. Herein, we have successfully developed ternary co-assembly systems based on aromatic amino acids, vinylnaphthalene derivatives and 1,2,4,5-tetracyanobenzene with effective chirality transfer. Notably, the handedness of supramolecular chirality and CPL can be readily inverted by changing the residues of amino acids, the substituents of achiral vinylnaphthalene derivatives, or by adjusting the stoichiometric ratio. The hydrogen bonds, charge transfer interactions, and steric hindrance are proved to be the crucial factors for the chirality inversion. This flexible control over chirality not only offers insights into developing multicomponent chiral materials with desirable handedness from simple molecular building blocks, but also is of practical value for use in chiroptics, chiral sensing, and photoelectric devices.

Recent Advances of Chiral Isolated and Small Organic Molecules: Structure and Properties for Circularly Polarized Luminescence

This paper explores recent advancements in the field of circularly polarized luminescence (CPL) exhibited by small and isolated organic molecules. The development and application of small CPL molecule are systematically reviewed through eight different chiral skeleton sections. Investigating the intricate interplay between molecular structure and CPL properties, the paper aims at providing and enlighting novel strategies for CPL-based applications.

Ligand Chirality Transfer from Solution State to the Crystalline Self-Assemblies in Circularly Polarized Luminescence (CPL) Active Lanthanide Systems

The synthesis of a family of chiral and enantiomerically pure pyridyl-diamide (pda) ligands that upon complexation with europium [Eu(CF3SO3)3] result in chiral complexes with metal centered luminescence is reported; the sets of enantiomers giving rise to both circular dichroism (CD) and circularly polarized luminescence (CPL) signatures. The solid-state structures of these chiral metallosupramolecular systems are determined using X-ray diffraction showing that the ligand chirality is transferred from solution to the solid state. This optically favorable helical packing arrangement is confirmed by recording the CPL spectra from the crystalline assembly by using steady state and enantioselective differential chiral contrast (EDCC) CPL Laser Scanning Confocal Microscopy (CPL-LSCM) where the two enantiomers can be clearly distinguished.

Polymers with Circularly Polarized Luminescent Properties: Design, Synthesis, and Prospects

Chiral materials with circularly polarized luminescence (CPL) have garnered significant attention owing to their distinctive luminescent properties and wide array of applications. CPL enables the selective emission of left and right circularly polarized light. The fluorescence quantum yield and dissymmetry factor play pivotal roles in the generation of CPL. Helical polymers exhibit immense promise as CPL materials due to their inherent chirality, structural versatility, modifiability, and capacity to incorporate diverse chromophores. This Review provides a brief review of the synthesis of CPL materials based on helical polymers. The CPL can be realized by aggregation-induced CPL of non-emissive helical polymers, and helices bearing chromophores on the pendants and on the chain end. Furthermore, future challenges and potential applications of CPL materials are summarized and discussed.

Metal-ion-triggered symmetry breaking of completely achiral azobenzene amphiphiles in water

Achieving control over symmetry breaking of completely achiral components in the aqueous phase is a significant challenge in supramolecular chemistry. Herein, we demonstrate that it is possible to construct chiral nanoassemblies by introducing metal ions (Zn2+, Fe3+, Al3+, Cu2+, and Ca2+) into completely achiral azobenzene amphiphiles with key structural factors in the pure aqueous phase. It is found that the coordination interactions, π-π stacking, hydrophilic and hydrophobic interactions, hydrogen bonding, and electrostatic interactions are crucial to the metal-ion-induced symmetry breaking of completely achiral building blocks. This study may provide an intriguing model system for constructing chiral assemblies based on completely achiral molecules.

Polymerizable rotaxane of cucurbituril protecting dopamine based adhesive hydrogels

The catechol moiety found within mussel proteins plays a pivotal role in enhancing their adhesive properties. Nonetheless, catechol compounds, such as dopamine (DOP) derivatives, are susceptible to oxidation, leading to the formation of quinone. This oxidation process poses a significant challenge in the development of DOP-based hydrogels, hampering their adhesion capabilities and hindering polymerization. To protect DOP moieties from oxidation, DOP and N-(3-aminopropyl)methacrylamide (AMA) moieties were grafted onto the side groups of biocompatible poly(glutamic acid) (PGA). Subsequently, the DOP unit, serving as a second guest, would be captured by a polymerizable rotaxane of cucurbituril (CB[n]), in which the host molecule CB[8] complexed with the first guest, polymerizable methyl viologen (MV), forming a protective function and dynamic cross-linking. Upon exposure to light curing, a composite network emerged through the synergy of covalent cross-linking and supramolecular host-guest complexation of DOP with CB[8]. The generated complexation between DOP and CB[8] could protect the DOP moieties, resulting in photocured hydrogels with exceptional adhesive strength and remarkable tensile capabilities. Moreover, 3D printing technology was used to create various models with these DOP-based hydrogels, demonstrating their promising applications in future.

Chiral nanomaterials in tissue engineering

Addressing significant medical challenges arising from tissue damage and organ failure, the field of tissue engineering has evolved to provide revolutionary approaches for regenerating functional tissues and organs. This involves employing various techniques, including the development and application of novel nanomaterials. Among them, chiral nanomaterials comprising non-superimposable nanostructures with their mirror images have recently emerged as innovative biomaterial candidates to guide tissue regeneration due to their unique characteristics. Chiral nanomaterials including chiral fibre supramolecular hydrogels, polymer-based chiral materials, self-assembling peptides, chiral-patterned surfaces, and the recently developed intrinsically chiroptical nanoparticles have demonstrated remarkable ability to regulate biological processes through routes such as enantioselective catalysis and enhanced antibacterial activity. Despite several recent reviews on chiral nanomaterials, limited attention has been given to the specific potential of these materials in facilitating tissue regeneration processes. Thus, this timely review aims to fill this gap by exploring the fundamental characteristics of chiral nanomaterials, including their chiroptical activities and analytical techniques. Also, the recent advancements in incorporating these materials in tissue engineering applications are highlighted. The review concludes by critically discussing the outlook of utilizing chiral nanomaterials in guiding future strategies for tissue engineering design.

Reversible chirality inversion of an AuAgx-cysteine coordination polymer by pH change

Responsive chiral systems have attracted considerable attention, given their potential for diverse applications in biology, optoelectronics, photonics, and related fields. Here we show the reversible chirality inversion of an AuAgx-cysteine (AuAgx-cys) coordination polymer (CP) by pH changes. The polymer can be obtained by mixing HAuCl4 and AgNO3 with L-cysteine (or D-cysteine) in appropriate proportions in H2O (or other surfactant solutions). Circular dichroism (CD) spectrum is used to record the strong optical activity of the AuAg0.06-L-cys enantiomer (denoted as L0.06), which can be switched to that of the corresponding D0.06 enantiomer by alkalization (final dispersion pH > 13) and can be switched back after neutralization (final dispersion pH <8). Multiple structural changes at different pH values (≈9.6, ≈13) are observed through UV-Vis and CD spectral measurements, as well as other controlled experiments. Exploration of the CP synthesis kinetics suggests that the covalent bond formation is rapid and then the conformation of the CP materials would continuously evolve. The reaction stoichiometry investigation shows that the formation of CP materials with chirality inversion behavior requires the balancing between different coordination and polymerization processes. This study provides insights into the potential of inorganic stereochemistry in developing promising functional materials.

Full-Color Circularly Polarized Luminescence of Supramolecular Polymers with Handedness Inversion Regulated by Anion and Temperature

Constructing full-color circularly polarized luminescence (CPL) materials with switchable handedness in the solid state is an appealing yet considerably challenging task, especially for supramolecular polymer films assembled from homochiral monomers. Herein, supramolecular polymers with full-color CPL and inverted handedness are realized through the coassembly of a homochiral cholesterol derivative (PVPCC), metal ions (Zn2+), and achiral fluorescent dyes. The obtained coassembled systems show anion-directed supramolecular chirality inversion by exchanging the anions of NO3-, ClO4-, BF4-, and Cl-. For instance, the negative CD and right-handed CPL are detected in the PVPCC/Zn(NO3)2 aggregates, which convert into positive CD and left-handed CPL after introducing Cl-, corresponding to the transformation from nanorods to nanofibers. Furthermore, the tunable CPL color and handedness inversion of the coassembly system of PVPCC/Zn(NO3)2 and achiral fluorescent dyes can be established by alternately changing the assembling temperature of 298 and 273 K. Importantly, the full-color CPL polymeric materials are then constructed by doping the PVPCC/Zn(NO3)2/dyes complexes into poly(methyl methacrylate) (PMMA) film, which maintains the handedness inversion and shows the enhanced CPL performance. The work not only deepens the understanding of chirality inversion in supramolecular chemistry but also helps to construct full-color CPL materials with switchable handedness from homochiral building blocks in materials science.

Stimuli-responsive synthetic helical polymers

Synthetic dynamic helical polymers (supramolecular and covalent) and foldamers share the helix as a structural motif. Although the materials are different, these systems also share many structural properties, such as helix induction or conformational communication mechanisms. The introduction of stimuli responsive building blocks or monomer repeating units in these materials triggers conformational or structural changes, due to the presence/absence of the external stimulus, which are transmitted to the helix resulting in different effects, such as assymetry amplification, helix inversion or even changes in the helical scaffold (elongation, J/H helical aggregates). In this review, we show through selected examples how different stimuli (e.g., temperature, solvents, cations, anions, redox, chiral additives, pH or light) can alter the helical structures of dynamic helical polymers (covalent and supramolecular) and foldamers acting on the conformational composition or molecular structure of their components, which is also transmitted to the macromolecular helical structure.

Controllable Circularly Polarized Luminescence with High Dissymmetry Factor via Co-Assembly of Achiral Dyes in Liquid Crystal Polymer Films

Circularly polarized luminescence (CPL) materials are highly demanded due to their great potential in optoelectronic and chiroptical elements. However, the preparation of CPL films with high luminescence dissymmetry factors (glum ) remains a formidable task, which impedes their practical application in film-based devices. Herein, a facile strategy to prepare solid CPL film with a high glum through exogenous chiral induction and amplification of liquid crystal polymers is proposed. Amplification and reversion of the CPL appear when the films are annealed at the chiral nematic liquid crystalline temperature and the maximal glum up to 0.30 due to the enhancement of selective reflection. Thermal annealing treatment at different liquid crystalline states facilitates the formation of the chiral liquid phase and adjusts the circularly polarized emission. This work not only provides a straightforward and versatile platform to construct organic films capable of exhibiting strong circularly polarized emission but also is helpful in understanding the exact mechanism for the liquid crystal enhancement of CPL performance.

Machine-Learning-Driven G-Quartet-Based Circularly Polarized Luminescence Materials

Circularly polarized luminescence (CPL) materials have garnered significant interest due to their potential applications in chiral functional devices. Synthesizing CPL materials with a high dissymmetry factor (glum ) remains a significant challenge. Inspired by efficient machine learning (ML) applications in scientific research, this work demonstrates ML-based techniques for the first time to guide the synthesis of G-quartet-based CPL gels with high glum values and multiple chiral regulation strategies. Employing an "experiment-prediction-verification" approach, this work devises a ML classification and regression model for the solvothermal synthesis of G-quartet gels in deep eutectic solvents. This process illustrates the relationship between various synthesis parameters and the glum value. The decision tree algorithm demonstrates superior performance across six ML models, with model accuracy and determination coefficients amounting to 0.97 and 0.96, respectively. The screened CPL gels exhibiting a glum value up to 0.15 are obtained through combined ML guidance and experimental verification, among the highest ones reported till now for biomolecule-based CPL systems. These findings indicate that ML can streamline the rational design of chiral nanomaterials, thereby expediting their further development.

Graphene oxide-doped chiral dextro-hydrogel promotes peripheral nerve repair through M2 polarization of macrophages

Dextro-chirality is reported to specifically promote the proliferation and survival of neural cells. However, applying this unique performance to nerve repair remains a great challenge. Graphite oxide (GO)-phenylalanine derivative hydrogel system was constructed through doping 5% GO into self-assembly dextro- or levo-hydrogels (named as dextro and levo group, respectively), which exhibited identical physical and chemical properties, cyto-compatibility, and mirror-symmetrical chirality. In vivo experiments using rat sciatic nerve repair models showed that the functional recovery and histological restoration of regenerating nerves in the dextro group were significantly improved, approaching that of autograft implantation. The doped GO promoted M2 polarization of macrophages, increasing the expression of platelet-derived growth factor BB chain and vascular endothelial growth factor, thereby improving angiogenesis in regenerating nerves. A mechanism is proposed for the facilitated nerve repair through the synergistic effect of GO and dextro-hydrogel, involving dextro-chirality selection of neural cells and GO-induced M2 polarization, which promotes microvascular regeneration and myelination. This study showcases the immense potential of chirality in addressing neurological issues by providing a compelling demonstration of the development of effective therapies that leverage the unique matrix chirality selection of nerve cells to promote peripheral nerve regeneration.

Halogen bonding-driven chiral amplification of a bimetallic gold-copper cluster through hierarchical assembly

Understanding the fundamentals and applications of chirality relies substantially on the amplification of chirality through hierarchical assemblies involving various weak interactions. However, a notable challenge remains for metal clusters chiral assembly driven by halogen bonding, despite their promising applications in lighting, catalysis, and biomedicine. Here, we used halogen bonding-driven assembly to achieve a hierarchical degree of achiral emissive Au2Cu2 clusters. From single crystals to one-dimensional ribbons and then to helixes, the morphologies were primarily modulated by intermolecular halogen bonding that evoked by achiral or/and chiral iodofluorobenzene (IFBs) molecules. Concomitantly, the luminescence and circularly polarized luminescence (CPL) changed a lot, ultimately leading to a substantial increase in the luminescence dissymmetry g-factor (glum) of 0.036 in the supramolecular helix. This work opens an avenue for hierarchical assemblies using predesigned metal clusters as building blocks though directional halogen bonding. This achievement marks a noteworthy advancement in the field of nanosized inorganic functional blocks.

Multicolor circularly polarized luminescence inversion of metal-organic supramolecular polymers

Metal-organic supramolecular polymers (MOSPs) with multicolor circularly polarized luminescence (CPL) and handedness inversion were constructed from the coordination-driven assembly of pyridine-cyanostilbene-cholesterol and metal salts by modulating the treatment modes, solvents, and metal ions.

Solvation-Mediated Self-Assembly from Crystals to Helices of Protic Acyclic Carbene AuI -Enantiomers with Chirality Amplification

Constructing chiral supramolecular assembly and exploring the underlying mechanism are of great significance in promoting the development of circularly polarized luminescence (CPL)-active materials. Herein, we report a solvation-mediated self-assembly from single-crystals to helical nanofibers based on the first protic acyclic (methoxy)(amino)carbenes (pAMACs) AuI -enantiomers driven by a synergetic aurophilic interactions and H-bonds. Their aggregation-dependent thermally activated delayed fluorescence properties with high quantum yields (ΦFL ) up to 95 % were proved to be attributed to packing modes of Au⋅⋅⋅Au dimers with π-stacking or one-dimensional extended Au⋅⋅⋅Au chains. Via drop-casting method, supramolecular P- or M-helices were prepared. Detailed studies on the helices demonstrate that formations of extended helical Au⋅⋅⋅Au molecular chains amplify supramolecular chirality, leading to strong CPL with high dissymmetry factor (|glum |=0.030, ΦFL =67 %) and high CPL brightness (BCPL ) of 4.87×10-3 . Our findings bring new insights into the fabrication of helical structures to improve CPL performance by modifying aurophilic interactions.

Antifouling and Injectable Granular Hydrogel for the Prevention of Postoperative Intrauterine Adhesion

Postoperative intrauterine adhesion (IUA), caused by endometrial basal layer injury, is one of the main causes of female infertility. The excessive deposition of fibrin as well as fibroblast is considered the root cause of IUA. However, few clinical strategies are effective in preventing extracellular matrix (ECM) deposition at endometrial wounds that include protein and cell deposits. Herein, the injectable granular poly(N-(2-hydroxyethyl) acrylamide) (PHEAA) hydrogel (granular PHEAA gel), which presents excellent antifouling properties and remarkably prevents protein and cell adhesions, is used to prevent postoperative IUA. The granular PHEAA gel with a jammed network structure exhibits outstanding injectability and superior stability. Compared with the IUA group, the granular PHEAA gel can promote regeneration of the endometrium while reducing the area of endometrial fibrosis. Immunohistochemical staining experiments indicate that the granular PHEAA gel can improve the proliferation of the endometrium, promote vascularization, and enhance anti-inflammatory effect in IUA rats. And the granular PHEAA gel can effectively slow down the fibrosis of uterine tissue. Importantly, the number of embryos is significantly increased after injecting granular PHEAA gel, inferring that there is an obvious reproductive function recovery of injured endometrium.

Circularly Polarized Luminescence Switching Driven by Precisely Tuned Supramolecular Interactions: From Hydrogen Bonding to π-π Interaction

It is highly challenging to achieve circularly polarized luminescence (CPL) switching by precisely tuning supramolecular interactions and unveiling the mechanism of supramolecular chirality inversion. Herein, we demonstrated CPL switching based on diethyl l-glutamate-9-cyanophenanthrene (LGCP) and diethyl l-glutamate-pyrene (LGP) via the precise regulation of supramolecular interactions. LGCP assembly driven by hydrogen bonding showed right CPL, while LGP assembly driven by π-π interaction led to left CPL. Remarkably, significant CPL switching was observed from the assemblies of LGCP/octafluoronaphthalene (OFN), attributed to the alteration of the dominating interaction from weak hydrogen bonding to rather strong π-π interaction, while the assemblies of LGP/OFN exhibited minimum CPL variation because the dominating π-π interaction within the assembly of LGP/OFN illustrated quite limited variations upon arene-perfluoroarene interaction. This work provides a feasible strategy toward the efficient modulation of the chiroptical properties of multiple component supramolecular systems, meanwhile offering possibilities for the mechanism exploration of the chirality inversion of supramolecular assemblies.

Stepwise Solution-Interfacial Nanoarchitectonics for Assembled Film with Full-Color and White-Light Circularly Polarized Luminescence

The fabrication of chiral thin films with tunable circularly polarized luminescence (CPL) colors is important in developing chiroptical materials but remains challenging due to the lack of assembly-initiated chiral film formation methodology. Here, by adopting a combined solution aggregation and interfacial assembly strategy, we report the fabrication of chiral film materials with full-color and white-light CPL. A biquinoline glutamic acid ester (abbreviated as BQGE) shows a typical aggregation-induced emission property with blue CPL after solution aggregation. Subsequent interfacial assembly of these solution aggregates on a solid substrate leads to the formation of a CPL active film consisting of nanobelt structures. Since the BQGE molecule has a coordination site, the CPL emission of an individual BQGE film can be extended from blue to green emission upon coordination with a zinc ion, accompanied by morphology transition from nanobelts to nanofibers. Further extension to red-color CPL is successfully achieved by coassembly with an achiral acceptor dye. Interestingly, the proper combination of coordination ratio and acceptor loading ratio provides bright white-light CPL emission from the BQGE/Zn²⁺/PDA triad composite film. This work provides a new approach to fabricating chiroptical film materials with controlled microscopic morphology and tunable CPL properties.

Reversible Inversion of Circularly Polarized Luminescence in a Coassembly Supramolecular Structure with Achiral Sulforhodamine B Dyes

The dynamic control of circularly polarized luminescence (CPL) has far-reaching significance in optoelectronics, information storage, and data encryption. Herein, we reported the reversible inversion of CPL in a coassembly supramolecular system consisting of chiral molecules L4, which contain two positively charged viologen units, and achiral ionic surfactant sodium dodecyl sulfate (SDS) by introducing achiral sulforhodamine B (SRB) dye molecules. The chirality of CPL in the coassemblies can be efficiently regulated and inverted by simply adjusting the amount of SRB. A series of experimental characterization, including optical spectroscopy, electron microscope, ¹H NMR, and X-ray scattering measurements, suggested that SRB could coassemble with L4/SDS to establish a new stable L4/SDS/SRB supramolecular structure through electrostatic interactions. Moreover, the negative-sign CPL could revert to the positive-sign CPL if titanium dioxide (TiO₂) nanoparticles were used to decompose SRB molecules. The evolution of the CPL inversion process could be cycled at least 5 times without a significant decline in CPL signals when SRB was refueled to the system. Our results provide a facile approach to dynamically regulating the handedness of CPL in a multiple-component supramolecular system via achiral species.

One-Step Construction of Tryptophan-Derived Small Molecule Hydrogels for Antibacterial Materials

Amino acid-based hydrogels have received widespread attention because of their wide range of sources, biodegradability, and biocompatibility. Despite considerable progress, the development of such hydrogels has been limited by critical problems such as bacterial infection and complex preparation. Herein, by using the non-toxic gluconolactone (GDL) to adjust the pH of the solution to induce the rapid self-assembly of N-[(benzyloxy)carbonyl]-L-tryptophan (ZW) to form a three-dimensional (3D) gel network, we developed a stable and effective self-assembled small-molecule hydrogel. Characterization assays and molecular dynamics studies indicate that π-π stacking and hydrogen bonding are the main drivers of self-assembly between ZW molecules. In vitro experiments further confirmed this material's sustained release properties, low cytotoxicity, and excellent antibacterial activity, particularly against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. This study provides a different and innovative perspective for the further development of antibacterial materials based on amino acid derivatives.

Metallophilic Interactions Drive Supramolecular Chirality Evolution and Amplify Circularly Polarized Luminescence

Metallophilic interactions, which are ubiquitous among d¹⁰ metal complexes with linear coordination geometries, can direct one-dimensional assembly. However, the ability of these interactions to manipulate chirality at the hierarchical level largely remains unknown. In this work, we unveiled the role of Au···Cu metallophilic interactions in directing the chirality of multicomponent assemblies. N-heterocyclic carbene-Au(I) complexes bearing amino acid residues formed chiral co-assemblies with [CuI₂]^- anions via Au···Cu interactions. These metallophilic interactions changed the molecular packing modes of the co-assembled nanoarchitectures from lamellar to columnar chiral packing. This transformation initiated the emergence, inversion, and evolution of supramolecular chirality, thereby affording helical superstructures, depending on the geometry of building units. In addition, the Au···Cu interactions altered the luminescence properties and induced the emergence and amplification of circularly polarized luminescence. This work, for the first time, revealed the role of Au···Cu metallophilic interactions in modulating supramolecular chirality, paving the way for the construction of functional chiroptical materials based on d¹⁰ metal complexes.

Metallophilic Interaction-Mediated Hierarchical Assembly and Temporal-Controlled Dynamic Chirality Inversion of Metal-Organic Supramolecular Polymers

The study of dynamic supramolecular chirality inversion (SMCI) not only helps to deepen the understanding of chiral transfer and amplification in both living organizations and artificially chemical self-assembly systems but also is useful for the development of smart chiral nanomaterials. However, it is still challenging to achieve the dynamic SMCI of the self-aggregation of metal-organic supramolecular polymers with great potential in asymmetric synthesis, chiroptical switches, and circular polarized luminescence. Here, we successfully developed a hierarchical coassembly system based on the mPAzPCC and various metal ions with effective chirality transfer and temporal-controlled SMCI. Due to the dynamic self-assembly and hierarchical chirality transfer of the Ag⁺/mPAzPCC complex driven by metallophilic interaction and coordination, morphological transition with nanoribbons, helical nanoribbons, and chiral nanotubules was successively obtained. Interestingly, the SMCI of chiral nanoaggregates was precisely regulated by solvents and metal ions in the Cu²⁺/mPAzPCC and Mn²⁺/mPAzPCC system. Besides, temporal-controlled dynamic SMCI switching from helix to bundled helix was clearly revealed in the aggregation of Cu²⁺/mPAzPCC, Mn²⁺/mPAzPCC, and Bi³⁺/mPAzPCC systems. This work provides a metallophilic interaction-mediated helical assembly pathway to dynamically modulate the chirality of metal-organic complex-based assemblies and deepen the understanding of the hierarchically dynamic self-assembly process, which would be of great potential in metal ion-mediated supramolecular asymmetric catalysis and bioinspired chiral sensing.

Chiral template-induced porphyrin-based self-assembled materials for electrochemical chiral sensing

Chirality plays a key role in many fields of natural sciences as well as life sciences. Chiral materials are widely developed and used for electrochemical chiral recognition. In recent years, carbon quantum dots (CQDs) have been widely used as a novel carbon nanomaterial due to their excellent charge transfer properties, good biocompatibility, and low cost. The special structure of π-conjugated porphyrin attracts attention. Supramolecular self-assembly shows a way to construct chiral materials by self-assembling simple molecules into chiral composites. Herein, we demonstrate the self-assembly of achiral porphyrins induced by chiral carbon quantum dots assembled from L- and or D-tryptophan (L- and or D-Trp) with carbon quantum dots, resulting in 5,10,15,20-tetrakis (4-carboxyPheyl) (TCPP) self-assembled structure. The electrochemical chiral recognition of chiral self-assembled materials was studied using Phenylalanine (Phe) enantiomer as a chiral analyte. Electrochemical chiral recognition results showed that the chiral self-assembled materials induced by chiral templates have a good ability to discriminate Phe enantiomers. Therefore, this research provides a new idea for the synthesis of chiral composites and further expands applications to electrochemical chiral recognition.

pH and Salt-Assisted Macroscopic Chirality Inversion of Gadolinium Coordination Polymer

The precise adjustment of handedness of helical architectures is important to regulate their functions. Macroscopic chirality inversion has been achieved in organic supramolecular systems by pH, metal ions, solvents, chiral and non-chiral additives, temperature, and light, but rarely in coordination polymers (CPs). In particular, salt-assisted macroscopic chirality inversion has not been reported. In this work, we carried out a systematic investigation on the role of pH and salt in regulating the morphology of CPs based on Gd(NO₃)₃ and R-(1-phenylethylamino)methylphosphonic acid (R-pempH₂). Without extra NO₃^-, the chirality inversion from the left-handed superhelix R-M to the right-handed superhelix R-P can be achieved by pH modulation from 3.2 to 3.8. The addition of NaNO₃ (2.0 eq) at pH 3.8 results in an inversion of chiral sense from R-P to R-M as a pure phase. To our knowledge, this is the first example of salt-assisted macroscopic helical inversion in artificial systems.

Switchable Circularly Polarized Signals with High Asymmetric Factor Triggered by Dual Photonic Bandgap Structure

Currently, the smart photonic materials that can switch circularly polarized signals in real-time have attracted extensive attention due to numerous potential applications in information storage and photonics displays. However, the dynamically reversible switching of circularly polarized signals requires precise structural reconfiguration, which is rarely achieved in traditional biomaterials. Herein, a dual photonic bandgap (PBG) structure is constructed based on the optical propagation principle of cellulose-based photonic crystals, enabling the flexible switching of the intensity, wavelength, and direction of circularly polarized luminescence (CPL). By adjusting the fluorescence intensity and the matching degree of chiral structure, the asymmetric factor value of dual PBG structure is up to -1.47, far exceeding other cellulose-based materials. Importantly, it is demonstrated that dual CPL emission can be efficiently induced by two different PBGs, opening a new approach for on-demand switching of single and dual CPL emission. In addition, the dual PBG structure exhibits dual circularly polarized reflected signals under the circular polarizer, which perfectly embodies the applicability of multiple encryptions in QR codes. This work provides new insights into the real-time manipulation of circularly polarized signals by chiral photonic materials.

Chiral Inversion and Recovery of Supramolecular Luminescent Copper Nanocluster Hydrogels Triggered by Polyethyleneimine and Polyoxometalates

Construction of controllable chiroptical supramolecular luminescence systems is of great significance for developing intelligent chiral luminescence materials with precise and effective regulation and understanding chirality-switching phenomena in biological systems, which has attracted extensive attention. Because chiral metal nanoclusters (NCs) can provide facilities for the study of nanoscale chiral effects, in this study, we select chiral glutathione-stabilized copper NCs (G-SH-Cu NCs) to construct a supramolecular luminescent hydrogel with achiral branched polyethyleneimine (PEI) and polyoxometalates [Na₉(EuW₁₀O₃₆)·32H₂O, denoted as EuW₁₀]. Thus, a chiral property precise controlled system was constructed by self-assembly. Interestingly, the addition of PEI to G-SH-Cu NC solution induced the formation of luminescent hydrogels with chiral inversion, while further addition of EuW₁₀ not only enhanced the luminescence of the hydrogel but also recovered the chiroptical properties. The chiral inversion behavior is possibly ascribed to the hydrogen bond interaction/electrostatic interaction between G-SH-Cu NCs and PEI in the chiral inversion process, while the competition of hydrogen bonding interaction (between G-SH-Cu NCs and PEI) and electrostatic interaction (between PEI and EuW₁₀) was accountable for the chiral recovery process. Manipulation of chirality inversion in the metal NC-containing coassemblies is rare, while this work establishes a feasible strategy to modulate the chiral inversion behavior of Cu NCs, which not only produces new physicochemical properties of metal NCs through synergistic behavior but also offers a feasible way to realize the potential application of chiroptical materials.

In Situ Regulation of Microphase Separation-Recognized Circularly Polarized Luminescence via Photoexcitation-Induced Molecular Aggregation

Circularly polarized luminescence (CPL) has attracted great interest owing to its extensive optical information and chiral structural dependence. However, rationally regulating solid-phase CPL signals remains difficult because of the close packing of molecules in solid-state materials and the lack of structural visualization. In this work, we proposed a microphase-separation-recognized CPL regulation strategy via coassembly of a hexathiobenzene-based luminophore and chiral block copolymer (cBCP) with in situ photocontrollability. As a consequence to the continuous increase in the luminophore-to-cBCP ratio, the CPL signal of the supramolecular system exhibited an increasing trend until a critical point. Then, further increasing the ratio stretched the helical pitch of cBCP, which led to CPL reduction. With the photoexcitation-induced molecular aggregation of the luminophore, which was implemented using in situ photoirradiation, the helical pitch was retracted along with the restoration of the CPL signal. These processes were fully recognized and monitored by the microphase-separated nanomorphological change of the coassembled system, which indicated that such a structural contrast could be an effective method for rationally regulating the supramolecular chiropticity of solid-state materials.

Circularly polarised luminescence in an RNA-based homochiral, self-repairing, coordination polymer hydrogel

The aqueous equimolar reaction of Ag(i) ions with the thionucleoside enantiomer (-)6-thioguanosine, ((-)6tGH), yields a one-dimensional coordination polymer {Ag(-)tG} _n , the self-assembly of which generates left-handed helical chains. The resulting helicity induces an enhanced chiro-optical response compared to the parent ligand. DFT calculations indicate that this enhancement is due to delocalisation of the excited state along the helical chains, with 7 units being required to converge the calculated CD spectra. At concentrations ≥15 mmol l^-1 reactions form a sample-spanning hydrogel which shows self-repair capabilities with instantaneous recovery in which the dynamic reversibility of the coordination chains appears to play a role. The resulting gel exhibits circularly polarised luminescence (CPL) with a large dissymmetry factor of -0.07 ± 0.01 at 735 nm, a phenomenon not previously observed for this class of coordination polymer.

Self-sorting assembly of artificial building blocks

Self-assembly to build high-level structures, which is ubiquitous in living systems, has captured the imagination of scientists, striving to emulate the intricacy, homogeneity and versatility of the naturally occurring systems, and to pursue a similar level of organization in artificial building blocks. In particular, self-sorting assembly in multicomponent systems, based on the spontaneous recognition and consequent spatial aggregation of the same or interactive building units, is able to realize very complicated assembly behaviours, and usually results in multiple well-ordered products or hierarchical structures in a one-step manner. This highly efficient assembly strategy has attracted tremendous research attention in recent years, and numerous examples have been reported in artificial systems, particularly with supramolecular and polymeric building blocks. In the current review, we summarize the progress in recent years, and classify them into five main categories, based on their working mechanisms or principles. With the review of these strategies, we hope to provide not only some deep insights into this field, but also and more importantly, useful thoughts in the design and fabrication of self-sorting systems in the future.

Biomimetic Heterodimerization of Tetrapeptides to Generate Liquid Crystalline Hydrogel in A Two-Component System

Anisotropic structures made by hierarchical self-assembly and crystallization play an essential role in the living system. However, the spontaneous formation of liquid crystalline hydrogel of low molecular weight organic molecules with controlled properties remains challenging. This work describes a rational design of tetrapeptide without N-terminal modification and chemical conjugation that utilizes intermolecular interactions to drive the formation of nanofiber bundles in a two-component system, which could not be accessed by a single component. The diameter of nanofibers can be simply controlled by varying the enantiomer of electrostatic pairs. Mutation of lysine (K) to arginine (R) results in an over 30-fold increase of mechanical property. Mechanistic studies using different techniques unravel the mechanism of self-assembly and formation of anisotropic liquid crystalline domains. All-atom molecular dynamics simulations reveal that the mixture of heterochiral peptides self-assembles into a nanofiber with a larger width compared to the homochiral assemblies due to the different stacking pattern and intermolecular interactions. The intermolecular interactions show an obvious increase by substituting the K with R, facilitating a more stable assembly and further altering the assembly mechanics and bulk material properties. Moreover, we also demonstrated that the hydrogel properties can be easily controlled by incorporating a light-responsive group. This work provides a method to generate the liquid crystalline hydrogel from isotropic monomers.

Inversion of Supramolecular Chirality by In Situ Hydrolyzation of Achiral Diethylene Glycol Motifs

Chiral inversion of supramolecular assemblies is of great research interest due to its broad practical applications. However, chiral structure transition induced by in situ regulation of building molecules has remained a challenge. Herein, left-handed fibrous assemblies were constructed by C₂-symmetic l-phenylalanine coupled with diethylene glycol (LPFEG) molecules. In situ hydrolyzing terminal diethylene glycol motifs in LPFEG successfully inverted the chirality of the nanofibers from left- to right-handedness. The transition of right-handed fibers into left-handed fibers could also be achieved via hydrolyzing DPFEG molecules. Circular dichroism (CD) spectroscopy, 1D and 2D nuclear magnetic resonance (NMR) spectroscopy, and Fourier transform infrared (FT-IR) spectroscopy revealed that the back-folded achiral diethylene glycol played a vital role in L/DPFEG molecular arrangements and removing terminal diethylene glycol could induce the opposite rotation of molecular assemblies. Thanks to this merit, the enantioselective separation of racemic phenylalanine was obtained and the enantiomeric excess (ee) values could achieve around ±20% after separation. This study not only provides a new strategy to regulate the chiral structure via dynamic modulation of terminal substituents but also presents a promising application in the field of enantioselective separation.

Arene-perfluoroarene interaction induced chiroptical inversion and precise ee% detection of chiral acids in a benzimidazole-involved ternary coassembly

Flexible regulation of chirality and handedness of chiral functional materials and quantitative sensing of natural chiral compounds remains a considerable challenge. Herein, an achiral fluorescent 1-pyrenecarboxylic acid-benzimidazole derivative (PBI) was synthesized and its chiroptical properties upon coassembly with chiral acids (TA and MA) and octafluoronaphthalene (OFN) through hydrogen bonds between benzimidazole and chiral acids as well as an arene-perfluoroarene (AP) interaction between a pyrene moiety and OFN were systemically studied. The binary assemblies of PBI/TA and PBI/MA displayed opposite chiroptical properties including circular dichroism (CD) and circularly polarized luminescence (CPL) signals. Interestingly, the handedness of CPL was further inverted in ternary assemblies due to the synergistic effect of the AP interaction and hydrogen bonds. Besides, the highly accurate chiral sensing of chiral acids via binary assemblies was successfully achieved with a high correlation coefficient. This work provides a simple method for regulating the handedness of chiroptical active materials and quantitative sensing of chiral acids through orthogonal multiple component coassemblies.

Bioinspired supramolecular nanofiber hydrogel through self-assembly of biphenyl-tripeptide for tissue engineering

Supramolecular nanofiber peptide assemblies had been used to construct functional hydrogel biomaterials and achieved great progress. Here, a new class of biphenyl-tripeptides with different C-terminal amino acids sequences transposition were developed, which could self-assemble to form robust supramolecular nanofiber hydrogels from 0.7 to 13.8 kPa at ultra-low weight percent (about 0.27 wt%). Using molecular dynamics simulations to interrogate the physicochemical properties of designed biphenyl-tripeptide sequences in atomic detail, reasonable hydrogen bond interactions and "FF" brick (phenylalanine-phenylalanine) promoted the formation of supramolecular fibrous hydrogels. The biomechanical properties and intermolecular interactions were also analyzed by rheology and spectroscopy analysis to optimize amino acid sequence. Enhanced L929 cells adhesion and proliferation demonstrated good biocompatibility of the hydrogels. The storage modulus of BPAA-AFF with 10 nm nanofibers self-assembling was around 13.8 kPa, and the morphology was similar to natural extracellular matrix. These supramolecular nanofiber hydrogels could effectively support chondrocytes spreading and proliferation, and specifically enhance chondrogenic related genes expression and chondrogenic matrix secretion. Such biomimetic supramolecular short peptide biomaterials hold great potential in regenerative medicine as promising innovative matrices because of their simple and regular molecular structure and excellent biological performance.

Phosphorescent Cyclometalated Platinum(II) Enantiomers with Circularly Polarized Luminescence Properties and Their Assembly Behaviors

Platinum(II) complexes as supramolecular luminescent materials have received considerable attention due to their unique planar structures and fascinating photophysical properties. However, the molecular design of platinum(II) complexes with impressive circularly polarized luminescence properties still remains challenging and rarely explored. Herein, we reported a series of cyclometalated platinum(II) complexes with benzaldehyde and its derived imine-containing alkynyl ligands to investigate their phosphorescent, chiroptical, and self-assembly behaviors. An isodesmic growth mechanism is found for their temperature-dependent self-assembly process. The chiral sense of the enantiomers can be transferred from the chiral alkynyl ligands to the cyclometalated platinum(II) dipyridylbenzene N^C^N chromophore and further amplified through supramolecular assembly via intermolecular noncovalent interactions. Notably, distinctive phosphorescent properties and nanostructured morphologies have been found for enantiomers 4R and 4S. Their intriguing self-assembled nanostructures and phosphorescence behaviors are supported by crystal structure determination, ¹H NMR, emission, and UV-vis absorption spectroscopy, scanning electron microscopy, and X-ray powder diffraction studies.

Ultraviolet Light Detectable Circularly Polarized Room Temperature Phosphorescence in Chiral Naphthalimide Self-Assemblies

The combination of circularly polarized luminescence (CPL) and pure-organic room temperature phosphorescence (RTP) potentially facilitates the construction of organic chiroptical optoelectronics and display materials, which however are challenging to use in realizing smart control of luminescent colors and switchable chiroptical properties. Here, we show a host-guest strategy to fabricate color-tunable RTP-based circularly polarized phosphorescence. Napthalimides were conjugated directly to chiral segments, of which supramolecular chirality and CPL activities in solid-states could be triggered by substituting bromine atoms on amines. Introducing tetracyanobenzene as an achiral host matrix via simple grinding would allow for the intersystem crossing to trigger red RTP and corresponding CPL by excitation lower than 320 nm, with a large Stokes shift more than 300 nm. The critical excitation wavelength of the RTP switch is determined by the absorbance of tetracyanobenzene. When the excitation wavelength was larger than 320 nm, blue fluorescence dominated with turned off RTP and CPL. The excitation wavelength-dependent RTP and CPL switch allows for detecting ultraviolet (UV) light, showing distinguishable red-blue luminescent color transition, accompanied by on/off RTP. Changing the host matrix from tetracyanobenzene to tricyanobenzene or dicyanobenzene could adjust the critical detecting wavelength limit from 320 to 300 nm. This work establishes a strategy to realize color-tunable, UV light detectable RTP and CPL under smart control.

A Versatile Method for the End-Functionalization of Polycarbenes

End-functionalization is an effective strategy for constructing functional materials. A method for chain-end functionalization of helical polycarbenes is herein developed that relied on Sonogashira coupling reaction. In this work, a family of helical polycarbenes with controlled molecular mass (M_n ) and low polydispersity (M_w /M_n ) is readily prepared using Pd(II) and the Wei-Phos ligand as initiator. The Pd(II) complex is confirmed to remain at the chain end of polycarbene. Subsequently, a series of terminal alkyne derivatives with interesting functional groups, including the F atom, aldehyde, or anthracene groups, are synthesized. They could be installed at the chain end of polycarbene through Sonogashira coupling reaction catalyzed by the Pd(II) complex at the chain end. Moreover, a couple of hybrid block copolymers are easily obtained by installing terminal alkynes modified by another type of polymer. The structures of the isolated polymers are confirmed by ¹ H nuclear magnetic resonance (¹ H NMR), ¹⁹ F nuclear magnetic resonance (¹⁹ F NMR), ³¹ P nuclear magnetic resonance (³¹ P NMR), and Fourier transform infrared spectroscopy (FT-IR), respectively. The self-assembly properties of the hybrid block copolymers are also investigated by atomic force spectroscopy analysis. By the hereby developed method, various functional groups can be introduced at the chain end of helical polycarbenes for constructing functional polymer materials, moreover, the transition metal residues at the end of polymer chains can be easily removed.

Luminescent detection of pesticides by color changeable flexible coumarin-3-carboxylic acid/GdF3:Sm3+ composite film

The utilization and residue of pesticides exist multifaceted non-restrictive effects on food safety and ecological protection. Exploitation of rapid and sensitive pesticide detection technology is imperative and will be helpful to better control the detriment of pesticides. Here, a novel flexible film has been prepared based on organic-inorganic composite materials (coumarin-3-carboxylic acid and GdF₃:Sm³⁺), which exhibits good optical performance and can well realize the timely and maneuverable detection for different pesticides. The spectra and luminescence properties of each composition in the composite have been analyzed systematically, and the coordinated fluorescence emission of Sm³⁺ and coumarin-3-carboxylic acid is revealed at an excitation wavelength of 373 nm. Besides, the energy transfer mechanism is also researched by both experiment and theoretical calculation. The actual detection of different pesticides reveals differential fluorescence influence degree. Meanwhile, the flexible film still possesses sensitive recognition in the presence of micro concentration of pesticides. Results indicate that the flexible film with good optical performance can produce visual detection ability and provide a promising strategy for wider detection applications.

A chemosensor-based chiral coassembly with switchable circularly polarized luminescence

Fluorescent chemosensors represent fast response to analytes with pronounced luminescent variations. They are promising as potential candidates in controlling luminescence and chiroptical activities of self-assembled chiral systems, which however have not been accomplished to date. We present a coassembled multiple component system that could respond to SO2 derivatives, giving rise to dynamic aggregation behaviors and switchable luminescence as well as circularly polarized luminescence (CPL). Cholesteryl-naphthalimide and coumarin derivatives coassemble into vesicles and nanohelices under the solvent strategy, behaving as energy transfer donor and accepter respectively. Energy transfer enables CPL transition from green to red depending on the molar fraction. After the addition of SO2 derivatives, hypochromic shifts occur to CPL due to the nucleophilic addition reaction to coumarin domain, hindering energy transfer and allow for the emergence of pristine luminescence. Here, we show a protocol to control over luminescence and chiroptical features of supramolecular chiral self-assemblies using fluorescent chemosensors.