A Critical Review on Energy Conversion and Environmental Remediation of Photocatalysts with Remodeling Crystal Lattice, Surface, and Interface

Advancing Electrically Conductive Metal-Organic Frameworks for Photocatalytic Energy Conversion

ConspectusPhotocatalytic energy conversion is a pivotal process for harnessing solar energy to produce chemicals and presents a sustainable alternative to fossil fuels. Key strategies to enhance photocatalytic efficiency include facilitating mass transport and reactant adsorption, improving light absorption, and promoting electron and hole separation to suppress electron-hole recombination. This Account delves into the potential advantages of electrically conductive metal-organic frameworks (EC-MOFs) in photocatalytic energy conversion and examines how manipulating electronic structures and controlling morphology and defects affect their unique properties, potentially impacting photocatalytic efficiency and selectivity. Moreover, with a proof-of-concept study of photocatalytic hydrogen peroxide production by manipulating the EC-MOF's electronic structure, we highlight the potential of the strategies outlined in this Account.EC-MOFs not only possess porosity and surface areas like conventional MOFs, but exhibit electronic conductivity through d-p conjugation between ligands and metal nodes, enabling effective charge transport. Their narrow band gaps also allow for visible light absorption, making them promising candidates for efficient photocatalysts. In EC-MOFs, the modular design of metal nodes and ligands allows fine-tuning of both the electronic structure and physical properties, including controlling the particle morphology, which is essential for optimizing band positions and improving charge transport to achieve efficient and selective photocatalytic energy conversion.Despite their potential as photocatalysts, modulating the electronic structure or controlling the morphology of EC-MOFs is nontrivial, as their fast growth kinetics make them prone to defect formation, impacting mass and charge transport. To fully leverage the photocatalytic potential of EC-MOFs, we discuss our group's efforts to manipulate their electronic structures and develop effective synthetic strategies for morphology control and defect healing. For tuning electronic structures, diversifying the combinations of metals and linkers available for EC-MOF synthesis has been explored. Next, we suggest that synthesizing ligand-based solid solutions will enable continuous tuning of the band positions, demonstrating the potential to distinguish between photocatalytic reactions with similar redox potentials. Lastly, we present incorporating a donor-acceptor system in an EC-MOF to spatially separate photogenerated carriers, which could suppress electron-hole recombination. As a synthetic strategy for morphology control, we demonstrated that electrosynthesis can modify particle morphology, enhancing electrochemical surface area, which will be beneficial for reactant adsorption. Finally, we suggest a defect healing strategy that will enhance charge transport by reducing charge traps on defects, potentially improving the photocatalytic efficiency.Our vision in this Account is to introduce EC-MOFs as an efficient platform for photocatalytic energy conversion. Although EC-MOFs are a new class of semiconductor materials and have not been extensively studied for photocatalytic energy conversion, their inherent light absorption and electron transport properties indicate significant photocatalytic potential. We envision that employing modular molecular design to control electronic structures and applying effective synthetic strategies to customize morphology and defect repair can promote charge separation, electron transfer to potential reactants, and mass transport to realize high selectivity and efficiency in EC-MOF-based photocatalysts. This effort not only lays the foundation for the rational design and synthesis of EC-MOFs, but has the potential to advance their use in photocatalytic energy conversion.

Photocatalytic Tandem Protocol for the Synthesis of Bis(indolyl)methanes using Cu-g-C3N4-Imine Decorated on TiO2 Nanoparticles under Visible Light Irradiation

In this article, the visible-light-assisted photocatalytic activity of TiO2 nanoparticles functionalized with Cu(II) g-C3N4-imine was exploited for aerobic oxidation of alcohols to aldehydes followed by condensation with indoles in the presence of 2,2,6,6-tetramethylpiperidinyloxy to present a one-pot tandem strategy for the synthesis of bis(indolyl)methanes (BIMs) under solvent-free conditions. The synergistic effect between the components to improve the photocatalytic activity of the as-prepared Cu-g-C3N4-imine/TiO2 nanoparticles resulting from electron-hole separation was approved by PL spectroscopy. Moreover, action spectra showed a light-dependent photocatalysis with effective visible-light responsivity of the photocatalyst. The present method includes different aspects of green chemistry: one-pot tandem synthesis of a variety of BIMs using alcohols that are less toxic, more available, more economical, and more stable than aldehydes; removing the byproducts resulting from overoxidation of alcohols and polymerization of aldehydes and indoles; the use of air as a safe oxidant; visible light as a safe energy source; and solvent-free conditions. A reusability test demonstrated that the catalyst retained its efficiency even after five runs.

Facile synthesis of efficient MoS2-coupled graphitic carbon nitride Z-scheme heterojunction nanocomposites: photocatalytic removal of methylene blue dye under solar light irradiation

Among different types of semiconductor photocatalysts, MoS2 hybridized with graphitic carbon heterojunction has developed the most promising "celebrity" due to its static chemical properties, suitable band structure, and facile synthesis. Physiochemical and surface characterizations were revealed with structural, electronic, and optical analysis. Diffused reflectance spectroscopy evidenced the energy band gap tailoring from 2.62 eV for pure g-C3N4 and 1.68 eV for MoS2 to 2.12 eV for the hybridized heterojunction nanocomposite. Effective electron/hole pair separation, rise in redox species, and great utilization of solar range because of band gap modifying leading to greater degradation efficacy of g-C3N4/MoS2 heterojunction. The photocatalytic degradation with MoS2/g-C3N4 heterojunction catalyst to remove methylene blue dye was remarkably enriched and much higher than g-C3N4. By carefully examining the stimulus aspects, a probable mechanism is suggested, assuming that the concurring influence of MoS2 and g-C3N4, the lesser crystallite size, and more solubility in aquatic solution furnish the efficient e--h+ pair separation and tremendous photocatalytic degradation activity. This work delivers a novel idea to improve the efficient MoS2/g-C3N4 heterojunction for improved photocatalytic degradation in environmental refinement.

Direct Z-scheme heterojunction impregnated MoS2-NiO-CuO nanohybrid for efficient photocatalyst and dye-sensitized solar cell

In this present work, the preparation of ternary MoS2-NiO-CuO nanohybrid by a facile hydrothermal process for photocatalytic and photovoltaic performance is presented. The prepared nanomaterials were confirmed by physio-chemical characterization. The nanosphere morphology was confirmed by electron microscopy techniques for the MoS2-NiO-CuO nanohybrid. The MoS2-NiO-CuO nanohybrid demonstrated enhanced crystal violet (CV) dye photodegradation which increased from 50 to 95% at 80 min; The degradation of methyl orange (MO) dye increased from 56 to 93% at 100 min under UV-visible light irradiation. The trapping experiment was carried out using different solvents for active species and the Z-Scheme photocatalytic mechanism was discussed in detail. Additionally, a batch series of stability experiments were carried out to determine the photostability of materials, and the results suggest that the MoS2-NiO-CuO nanohybrid is more stable even after four continuous cycles of photocatalytic activity. The MoS2-NiO-CuO nanohybrid delivers photoconversion efficiency (4.92%) explored efficacy is 3.8 times higher than the bare MoS2 (1.27%). The overall results indicated that the MoS2-NiO-CuO nanohybrid nanostructure could be a potential candidate to be used to improve photocatalytic performance and DSSC solar cell applications as well.

Ultrasonic-assisted synthesis of CaCu3Ti4O12/reduced graphene oxide composites for enhanced photocatalytic degradation of pharmaceutical products: Ibuprofen and Ciprofloxacin

The objective of this research is to create a highly effective approach for eliminating pollutants from the environment through the process of photocatalytic degradation. The study centers around the production of composites consisting of CaCu3Ti4O12 (CCTO) and reduced graphene oxide (rGO) using an ultrasonic-assisted method, with a focus on their capacity to degrade ibuprofen (IBF) and ciprofloxacin (CIP) via photodegradation. The impact of rGO on the structure, morphology, and optical properties of CCTO was inspected using XRD, FTIR, Raman, FESEM, XPS, BET, and UV-Vis. Morphology characterization showed that rGO particles were dispersed within the CCTO matrix without any specific chemical interaction between CCTO and C in the rGO. The BET analysis revealed that with increasing the amount of rGO in the composite, the specific surface area significantly increased compared to the CCTO standalone. Besides, increasing rGO resulted in a reduction in the optical bandgap energy to around 2.09 eV, makes it highly promising photocatalyst for environmental applications. The photodegradation of IBF and CIP was monitored using visible light irradiation. The results revealed that both components were degraded above 97% after 60 min. The photocatalyst showed an excellent reusability performance with a slight decrease after five runs to 93% photodegradation efficiency.

2D/2D Heterojunction of BiOBr/BiOI Nanosheets for In Situ H2 O2 Production and Activation toward Efficient Photocatalytic Wastewater Treatment

The presence of toxic organic pollutants in aquatic environments poses significant threats to human health and global ecosystems. Photocatalysis that enables in situ production and activation of H2 O2 presents a promising approach for pollutant removal; however, the processes of H2 O2 production and activation potentially compete for active sites and charge carriers on the photocatalyst surface, leading to limited catalytic performance. Herein, a hierarchical 2D/2D heterojunction nanosphere composed of ultrathin BiOBr and BiOI nanosheets (BiOBr/BiOI) is developed by a one-pot microwave-assisted synthesis to achieve in situ H2 O2 production and activation for efficient photocatalytic wastewater treatment. Various experimental and characterization results reveal that the BiOBr/BiOI heterojunction facilitates efficient electron transfer from BiOBr to BiOI, enabling the one-step two-electron O2 reduction for H2 O2 production. Moreover, the ultrathin BiOI provides abundant active sites for H2 O2 adsorption, promoting in situ H2 O2 activation for •O2 - generation. As a result, the BiOBr/BiOI hybrid exhibits excellent activity for pollutant degradation with an apparent rate constant of 0.141 min-1 , which is 3.8 and 47.3 times that of pristine BiOBr and BiOI, respectively. This work expands the range of the materials suitable for in situ H2 O2 production and activation, paving the way toward sustainable environmental remediation using solar energy.

Estimating Nonradiative Excited-State Lifetimes in Photoactive Semiconducting Nanostructures

The time evolution of the exciton generated by light adsorption in a photocatalyst is an important feature that can be approached from full nonadiabatic molecular dynamics simulations. Here, a crucial parameter is the nonradiative recombination rate between the hole and the electron that form the exciton. In the present work, we explore the performance of a Fermi's golden rule-based approach on predicting the recombination rate in a set of photoactive titania nanostructures, relying solely on the coupling of the ground and first excited state. In this scheme the analysis of the first excited state is carried out by invoking Kasha's rule thus avoiding computationally expensive nonadiabatic molecular dynamics simulations and resulting in an affordable estimate of the recombination rate. Our results show that, compared to previous ones from nonadiabatic molecular dynamics simulations, semiquantitative recombination rates can be predicted for the smaller titania nanostructures, and qualitative values are obtained from the larger ones. The present scheme is expected to be useful in the field of computational heterogeneous photocatalysis whenever a complex and computationally expensive full nonadiabatic molecular dynamics cannot be carried out.

Improving bioelectrochemical performance by sulfur-doped titanium dioxide cooperated with Zirconium based metal-organic framework (S-TiO2@MOF-808) as cathode in microbial fuel cells

The sulfur-doped titanium dioxide (S-TiO2) cooperated with Zirconium based on a kind of metal-organic framework (MOF-808) was successfully prepared as cathode catalyst (S-TiO2@MOF-808) of microbial fuel cell (MFC) by two-step hydrothermal reaction. The particle size was approximately 5 μm, and the spherical S-TiO2 particle was attached to the surface of MOF-808 as irregular block solid. Zr-O, C-O and O-H bond were indicated to exist in S-TiO2@MOF-808. When n (Zr4+): n(Ti4+) was 1: 5, S-TiO2@MOF-808 showed better oxygen reduction reaction (ORR). The introduction of S-TiO2 restrained the framework collapse of MOF-808, S-TiO2@MOF-808 showed much higher catalytic stability in reaction. The recombination of sulfur and TiO2 reduced the charge transfer resistance, accelerated the electron transfer rate, and improved ORR greatly. The maximum power density of S-TiO2@MOF-808-MFC was 84.05 mW/m2, about 2.17 times of S-TiO2-MFC (38.64 mW/m2). The maximum voltage of S-TiO2@MOF-808-MFC was 205 mV, and the stability was maintained for 6 d.

Highly Efficient Photocatalytic Degradation of Organic Pollutants Using a Polyvinylidene Fluoride/Polyvinylpyrrolidone-Cuprous Oxide Composite Membrane

Enhancing the efficiency of photocatalysts in the removal of organic pollutants is of vital importance in wastewater treatment. In this work, a set of composite membranes that can be used for efficient removal of the organic dyes, such as methyl orange (MO), methylene blue (MB), and Congo red (CR), were prepared through coblending/electrospinning techniques using polyvinylidene fluoride (PVDF) as the substrate, polyvinylpyrrolidone (PVP) as the dispersing agent and wettability regulator, and cuprous oxide (Cu2O) as the photocatalyst. The results showed that Cu2O particles were well encapsulated in the electrospun PVDF/PVP fibers, and the composite membranes exhibited apparently enhanced hydrophilicity. Furthermore, compared with the pure Cu2O particles, the composite membranes not only showed a higher photocatalytic degradation ratio for MO (93.6%) but also showed a much higher degradation rate (62.4 mg/(mg·h)) in comparison with the other reported Cu2O-based composite photocatalytic materials in the literature. In addition, the membrane sample also had excellent recycling stability, and the retention rate of its removal ability maintained 92.1% after 5 times of recycling. Furthermore, the composite membranes also showed high removal ability toward MB and CR, with photocatalytic degradation ratios of 81.4 and 76.1%, respectively. This work indicates that the prepared PVDF/PVP-Cu2O composite membranes possess promising application prospects in wastewater treatment.

Nanolayered Structures and Nanohybrids Based on a Ternary System Co/Ti/Zn for Production of Photo-Active Nanocomposites and Purification of Water Using Light

Water pollution has emerged as a major challenge for the scientific community because of the rapid expansion of the population and the industrial sector in the world. The current study focuses on introducing a new track for designing new optical nanocomposites for purifying water in addition to providing a new additive for building new nanohybrids. These targets were achieved through building a ternary system of Co/Ti/Zn nanocomposites and nanolayered structures. The Co/Ti/Zn nanolayered structures were prepared and intercalated by different kinds of organic acids: monocarboxylic and dicarboxylic acids. Long chains of organic acids were used to construct series of organic-inorganic nanohybrids. X-ray diffraction, thermal analyses, Fourier Transform Infrared spectroscopy, and scanning electron microscopy confirmed the formation of nanolayered structures and nanohybrids. The optical properties of the nanolayered structure showed that the Co/Ti/Zn LDH became photo-active compared with the usual Al/Zn LDH because of the reduction in the band gap energy from 5.3 eV to 3.3 eV. After thermal treatment, a highly photo-active nanocomposite was produced through observing more reduction for the band gap energy to become 2.8 eV. In addition, the dye of Acid Green 1 completely decomposed and converted to water and carbon dioxide during 17 min of UV radiation by the dual Co/Ti-doped zinc oxide nanocomposite. In addition, the kinetic study confirmed that the high optical activity of the dual Co/Ti-doped zinc oxide nanocomposite accelerated the degradation of the green dyes. Finally, from these results it could be concluded that designing effective nanocomposite for purification of water was accomplished through converting 2D nanolayered structures to a 3D porous structure of Ni/Ti/Zn nanocomposites. In addition, a new additive was achieved for heterostructured hybrids through building new Co/Ti/Zn/organic nanohybrids.

Ultrasonic processing of WO3 nanosheets integrated Ti3C2 MXene 2D-2D based heterojunctions with synergistic effects for enhanced water splitting and environmental remediation

This article describes a straightforward chemical procedure that involves hydrothermal and ultrasonic treatments to create a new 2D/2D ultrathin WO3/Ti3C2 heterojunctions. The features of the fabricated heterojunctions were characterized and examined by field emission electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), optical absorption spectroscopy (UV-Vis). By photodegrading an organic dye under the influence of visible light, the photocatalytic degradation capabilities of the heterojunctions were also investigated. The performance of WO3/Ti3C2 was superior to that of bare WO3, with a removal rate of 94% and a kinetic rate constant (k) that was approximately 3 times that of WO3. The creation of 2D/2D heterojunction was observed to encourage the spatial charge separation and increase the surface reactive sites, to result with the increased photocatalytic activity in WO3/Ti3C2 heterojunction. The photocurrent values discovered through photoelectrochemical studies further indicated Ti3C2's active function in enhancing water-splitting performance. The impedance analysis examined by an electrochemical method revealed that heterojunctions might be helpful in accelerating the migration of charges quickly to get the outcomes seen.

Green approach for the fabrication of a ternary nanocatalyst (Ag-ZnONPs@Cy) for visible light-induced photocatalytic reduction of nitroarenes to aminoarenes

In recent times, the incorporation of metal oxide nanoparticles with organic dyes has piqued the interest of numerous researchers due to their diverse applications under visible light instead of UV radiation. This investigation employed a three-step methodology to fabricate cyanidin-sensitized silver-doped zinc oxide nanoparticles (Ag-ZnO@Cy). Initially, cyanidin dye was extracted from fresh black mulberry fruit, followed by the eco-friendly synthesis of Ag-ZnO nanoparticles (Ag-ZnONPs). The successful integration of the prepared cyanidin dye with Ag-ZnONPs was achieved through a straightforward, environmentally benign, and cost-efficient procedure. The resultant ternary composite underwent comprehensive characterization and confirmation utilizing various techniques, such as SEM, FT-IR, EDX, DRS, elemental mapping, and XRD. The experimental results for Ag-ZnONPs@Cy demonstrated that the nanocrystalline wurtzite exhibited spherical shapes with an average crystal size of 27.42 nm. Moreover, the photocatalytic activity of the synthesized Ag-ZnONPs@Cy was meticulously investigated under blue LED light irradiation. This inquiry encompassed examinations of catalyst amount, regeneration, stability, reusability, and the influence of light source on the hydrogenation of nitroarenes to the corresponding aminoarenes. The findings shed light on the potential of this composite for diverse photocatalytic applications.

Recent advances of modification effect in Co3O4-based catalyst towards highly efficient photocatalysis

Tricobalt tetroxide (Co3O4) has been developed as a promising photocatalyst material for various applications. Several reports have been published on the self-modification of Co3O4 to achieve optimal photocatalytic performance. The pristine Co3O4 alone is inadequate for photocatalysis due to the rapid recombination process of photogenerated (PG) charge carriers. The modification of Co3O4 can be extended through the introduction of doping elements, incorporation of supporting materials, surface functionalization, metal loading, and combination with other photocatalysts. The addition of doping elements and support materials may enhance the photocatalysis process, although these modifications have a slight effect on decreasing the recombination process of PG charge carriers. On the other hand, combining Co3O4 with other semiconductors results in a different PG charge carrier mechanism, leading to a decrease in the recombination process and an increase in photocatalytic activity. Therefore, this work discusses recent modifications of Co3O4 and their effects on its photocatalytic performance. Additionally, the modification effects, such as enhanced surface area, generation of oxygen vacancies, tuning the band gap, and formation of heterojunctions, are reviewed to demonstrate the feasibility of separating PG charge carriers. Finally, the formation and mechanism of these modification effects are also reviewed based on theoretical and experimental approaches to validate their formation and the transfer process of charge carriers.

Twistedly hydrophobic basis with suitable aromatic metrics in covalent organic networks govern micropollutant decontamination

The pre-designable structure and unique architectures of covalent organic frameworks (COFs) render them attractive as active and porous medium for water crisis. However, the effect of functional basis with different metrics on the regulation of interfacial behavior in advanced oxidation decontamination remains a significant challenge. In this study, we pre-design and fabricate different molecular interfaces by creating ordered π skeletons, incorporating different pore sizes, and engineering hydrophilic or hydrophobic channels. These synergically break through the adsorption energy barrier and promote inner-surface renewal, achieving a high removal rate for typical antibiotic contaminants (like levofloxacin) by BTT-DATP-COF, compared with BTT-DADP-COF and BTT-DAB-COF. The experimental and theoretical calculations reveal that such functional basis engineering enable the hole-driven levofloxacin oxidation at the interface of BTT fragments to occur, accompanying with electron-mediated oxygen reduction on terphenyl motif to active radicals, endowing it facilitate the balanced extraction of holes and electrons.

HVHC-ESD-Induced Oxygen Vacancies: An Insight into the Phenomena of Interfacial Interactions of Nanostructure Oxygen Vacancy Sites with Oxygen Ion-Containing Organic Compounds

The challenging environmental chemical and microbial pollution has always caused issues for human life. This article investigates the detailed mechanism of photodegradation and antimicrobial activity of oxide semiconductors and realizes the interface phenomena of nanostructures with toxins and bacteria. We demonstrate how oxygen vacancies in nanostructures affect photodegradation and antimicrobial behavior. Additionally, a novel method with a simple, tunable, and cost-effective synthesis of nanostructures for such applications is introduced to resolve environmental issues. The high-voltage, high-current electrical switching discharge (HVHC-ESD) system is a novel method that allows on-the-spot sub-second synthesis of nanostructures on top and in the water for wastewater decontamination. Experiments are done on rhodamine B as a common dye in wastewater to understand its photocatalytic degradation mechanism. Moreover, the antimicrobial mechanism of oxide semiconductors synthesized by the HVHC-ESD method with oxygen vacancies is realized on methicillin- and vancomycin-resistant Staphylococcus aureus strains. The results yield new insights into how oxygen ions in dyes and bacterial walls interact with the surface of ZnO with high oxygen vacancy, which results in breaking of the chemical structure of dyes and bacterial walls. This interaction leads to degradation of organic dyes and bacterial inactivation.

Photocatalytic Conversion of Methane: Current State of the Art, Challenges, and Future Perspectives

With 28-34 times the greenhouse effect of CO2 over a 100-year period, methane is regarded as the second largest contributor to global warming. Reducing methane emissions is a necessary measure to limit global warming to below 1.5 °C. Photocatalytic conversion of methane is a promising approach to alleviate the atmospheric methane concentrations due to its low energy consumption and environmentally friendly characteristics. Meanwhile, this conversion process can produce valuable chemicals and liquid fuels such as CH3OH, CH3CH2OH, C2H6, and C2H4, cutting down the dependence of chemical production on crude oil. However, the development of photocatalysts with a high methane conversion efficiency and product selectivity remains challenging. In this review, we overview recent advances in semiconductor-based photocatalysts for methane conversion and present catalyst design strategies, including morphology control, heteroatom doping, facet engineering, and cocatalysts modification. To gain a comprehensive understanding of photocatalytic methane conversion, the conversion pathways and mechanisms in these systems are analyzed in detail. Moreover, the role of electron scavengers in methane conversion performance is briefly discussed. Subsequently, we summarize the anthropogenic methane emission scenarios on earth and discuss the application potential of photocatalytic methane conversion. Finally, challenges and future directions for photocatalytic methane conversion are presented.

Photoelectrochemical Engineering for Light-Assisted Rechargeable Metal Batteries: Mechanism, Development, and Future

Rechargeable battery devices with high energy density are highly demanded by  our  modern society. The use of metal anodes is extremely attractive for future rechargeable battery devices. However, the notorious metal dendritic and instability of solid electrolyte interface issues pose a series of challenges for metal anodes. Recently, considering the indigestible dynamical behavior of metal anodes, photoelectrochemical engineering of light-assisted metal anodes have been rapidly developed since they efficiently utilize the integration and synergy of oriented crystal engineering and photocatalysis engineering, which provided a potential way to unlock the interface electrochemical mechanism and deposition reaction kinetics of metal anodes. This review starts with the fundamentals of photoelectrochemical engineering and follows with the state-of-art advance of photoelectrochemical engineering for light-assisted rechargeable metal batteries where photoelectrode materials, working principles, types, and practical applications are explained. The last section summarizes the major challenges and some invigorating perspectives for future research on light-assisted rechargeable metal batteries.

A Breakthrough in Photocatalytic Wastewater Treatment: The Incredible Potential of g-C3N4/Titanate Perovskite-Based Nanocomposites

Water pollution has emerged as a major global environmental crisis due to the massive contamination of water resources by the textile dyeing industry, organic waste, and agricultural residue. Since water is fundamental to life, this grave disregard puts lives at risk, making the protection of water resources a serious issue today. Recent research has shown great interest in improving the photocatalytic performance of graphitic carbon nitride (g-C3N4) for wastewater treatment. However, the photocatalytic removal activity of pure g-C3N4 is poor, owing to its minimal surface area, fast recombination of photo-generated electron-hole pairs, and poor light absorption. Recently, titanate perovskites (TNPs) have attracted significant attention in both environmental remediation and energy conversion due to their exceptional structural, optical, physiochemical, electrical, and thermal properties. Accordingly, TNPs can initiate a variety of surface catalytic reactions and are regarded as an emerging category of photocatalysts for sustainability and energy-related industries when exposed to illumination. Therefore, in this review article, we critically discuss the recent developments of extensively developed g-C3N4/TNPs that demonstrate photocatalytic applications for wastewater treatment. The different synthetic approaches and the chemical composition of g-C3N4/TNP composites are presented. Additionally, this review highlights the global research trends related to these materials. Furthermore, this review provides insight into the various photocatalytic mechanisms, including their potential impact and significance. Also, the challenges faced by such materials and their future scope are discussed.

Understanding palladium-tellurium cluster formation on WTe2: From a kinetically hindered distribution to thermodynamically controlled monodispersity

A fundamental understanding of the transition metal dichalcogenide (TMDC)-metal interface is critical for their utilization in a broad range of applications. We investigate how the deposition of palladium (Pd), as a model metal, on WTe₂(001), leads to the assembly of Pd into clusters and nanoparticles. Using X-ray photoemission spectroscopy, scanning tunneling microscopy imaging, and ab initio simulations, we find that Pd nucleation is driven by the interaction with and the availability of mobile excess tellurium (Te) leading to the formation of Pd-Te clusters at room temperature. Surprisingly, the nucleation of Pd-Te clusters is not affected by intrinsic surface defects, even at elevated temperatures. Upon annealing, the Pd-Te nanoclusters adopt an identical nanostructure and are stable up to ∼523 K. Density functional theory calculations provide a foundation for our understanding of the mobility of Pd and Te atoms, preferential nucleation of Pd-Te clusters, and the origin of their annealing-induced monodispersity. These results highlight the role the excess chalcogenide atoms may play in the metal deposition process. More broadly, the discoveries of synthetic pathways yielding thermally robust monodispersed nanostructures on TMDCs are critical to the manufacturing of novel quantum and microelectronics devices and catalytically active nano-alloy centers.

Experimental and computational study of metal oxide nanoparticles for the photocatalytic degradation of organic pollutants: a review

Photocatalysis is a more proficient technique that involves the breakdown or decomposition of different organic contaminants, various dyes, and harmful viruses and fungi using UV or visible light solar spectrum. Metal oxides are considered promising candidate photocatalysts owing to their low cost, efficiency, simple fabricating method, sufficient availability, and environment-friendliness for photocatalytic applications. Among metal oxides, TiO2 is the most studied photocatalyst and is highly applied in wastewater treatment and hydrogen production. However, TiO2 is relatively active only under ultraviolet light due to its wide bandgap, which limits its applicability because the production of ultraviolet is expensive. At present, the discovery of a photocatalyst of suitable bandgap with visible light or modification of the existing photocatalyst is becoming very attractive for photocatalysis technology. However, the major drawbacks of photocatalysts are the high recombination rate of photogenerated electron-hole pairs, the ultraviolet light activity limitations, and low surface coverage. In this review, the most commonly used synthesis method for metal oxide nanoparticles, photocatalytic applications of metal oxides, and applications and toxicity of different dyes are comprehensively highlighted. In addition, the challenges in the photocatalytic applications of metal oxides, strategies to suppress these challenges, and metal oxide studied by density functional theory for photocatalytic applications are described in detail.

Facile synthesis of water-soluble silver nanoclusters for the photocatalytic degradation of dyes by multivariate optimization approach

In this study, silver nanoclusters protected by the natural tripeptide ligand (GSH@Ag NCs) were constructed for photocatalytic dye degradation. The ultrasmall GSH@Ag NCs were found to exhibit a remarkably high degradation capability. Aqueous solutions of the hazardous organic dye Erythrosine B (Ery. B) and Rhodamine B (Rh. B) were subjected to degradation in the presence of Ag NCs under solar light and white-light LED irradiation. The degradation efficiency of GSH@Ag NCs was evaluated using UV-vis spectroscopy, where Erythrosine B showed considerably high degradation of 94.6% compared to Rhodamine B, which was degraded by 85.1%, corresponding to a 20 mg L^-1 degradation capacity in 30 min respectively under solar exposure. Moreover, the degradation efficacy for the above-mentioned dyes demonstrated a dwindling trend under white-light LED irradiation, attaining 78.57 and 67.923% degradation under the same experimental conditions. The astoundingly high degradation efficiency of GSH@Ag NCs under solar-light irradiation was due to the high I of 1370 W for solar light versus 0.07 W for LED light, along with the formation of hydroxyl radicals HO˙ on the catalyst surface initiating degradation due to oxidation.

In situ catalytic cells for x-ray absorption spectroscopy measurement

In catalysis, determining the relationship between the dynamic electronic and atomic structure of the catalysts and the catalytic performance under actual reaction conditions is essential to gain a deeper understanding of the reaction mechanism since the structure evolution induced by the absorption of reactants and intermediates affects the reaction activity. Hard x-ray spectroscopy methods are considered powerful and indispensable tools for the accurate identification of local structural changes, for which the development of suitable in situ reaction cells is required. However, the rational design and development of spectroscopic cells is challenging because a balance between real rigorous reaction conditions and a good signal-to-noise ratio must be reached. Here, we summarize the in situ cells currently used in the monitoring of thermocatalysis, photocatalysis, and electrocatalysis processes, focusing especially on the cells utilized in the BL14W1-x-ray absorption fine structure beamline at the Shanghai Synchrotron Radiation Facility, and highlight recent endeavors on the acquisition of improved spectra under real reaction conditions. This review provides a full overview of the design of in situ cells, aiming to guide the further development of portable and promising cells. Finally, perspectives and crucial factors regarding in situ cells under industrial operating conditions are proposed.

Carbon Dots Based Photoinduced Reactions: Advances and Perspective

Seeking clean energy as an alternative to traditional fossil fuels is the inevitable choice to realize the sustainable development of the society. Photocatalytic technique is considered a promising energy conversion approach to store the abundant solar energy into other wieldy energy carriers like chemical energy. Carbon dots, as a class of fascinating carbon nanomaterials, have already become the hotspots in numerous photoelectric researching fields and particularly drawn keen interests as metal-free photocatalysts owing to strong UV-vis optical absorption, tunable energy-level configuration, superior charge transfer ability, excellent physicochemical stability, facile fabrication, low toxicity, and high solubility. In this review, the classification, microstructures, general synthetic methods, optical and photoelectrical properties of carbon dots are systematically summarized. In addition, recent advances of carbon dots based photoinduced reactions including photodegradation, photocatalytic hydrogen generation, CO₂ conversion, N₂ fixation, and photochemical synthesis are highlighted in detail, deep insights into the roles of carbon dots in various systems combining with the photocatalytic mechanisms are provided. Finally, several critical issues remaining in photocatalysis field are also proposed.

Anchored Cu single atoms on porous g-C3N4 for superior photocatalytic H2 evolution from water splitting

One of the most promising strategies for producing hydrogen is photocatalytic water splitting, in which the photocatalyst is a key component. Among many semiconductor photocatalysts, g-C₃N₄ has attracted great attention due to its narrow band gap, excellent stability and low cost. However, practical application is limited by its poor intrinsic activity. In this work, a high-performance porous g-C₃N₄ (PCN) photocatalyst with anchored Cu single atoms (CuSAs) was synthesized by a one-step co-heating approach. The obtained Cu1.5-PCN displays an excellent hydrogen evolution rate (HER) of 2142.4 μmol h^-1 g^-1 under visible light (=420 nm), which is around 15 and 109 times higher than those of PCN and bulk g-C₃N₄, respectively. In addition, it also shows good stability during H₂ evolution. The results of experimental research and DFT simulations indicate that the single Cu ions formed bonds with the N-ring and these remain stable. Meanwhile, the special electronic structure of the Cu-N charge bridge extends the light absorption band to the visible-light region (380-700 nm). This high-performance and low-cost photocatalyst has great potential in solar energy conversion.

Enhancing Photocatalytic Antibiotics Mineralization and Water Oxidation via Constructing Interfacial Electric Field in Plate-on-Plate BiOCl/WO3 Photocatalysts

Two-dimensional materials and related plate-on-plate interfacial heterostructures offer great flexibility for integrating different atomic layers, providing an attractive scheme for the construction of built-in electric fields in photocatalysts. Here, we developed an interfacial engineering strategy to construct well-interfaced plate-on-plate BiOCl/WO₃ heterojunctions for general enhanced photocatalytic oxidation reactions. BiOCl/WO₃ heterojunctions exhibited significant enhancements in oxygen evolution and antibiotic degradation, with a rate of 9.5 times and 14.7 times higher than that of WO₃. This enhancement is attributed to the well lattice matching contact surface of WO₃ {020} plane with BiOCl {001} plane, which integrates a strong built-in electric field induced by Bi-O chemically bonds, providing atomically fast transport channels for electrons. These findings offer new guidelines for designing interfacial structures for high-performance oxidative photocatalysts and provide insights into the underlying interfacial carrier transport mechanisms.

Quantitatively regulating the ketone structure of triazine-based covalent organic frameworks for efficient visible-light photocatalytic degradation of organic pollutants: Tunable performance and mechanisms

As promising visible-light-responsive photocatalysts, triazine-based covalent organic frameworks (CTFs) still suffer from broad bandgap and high electron-hole recombination. As such, different contents of electron-rich ketone group were introduced to CTFs (X % keto-CTF), aiming to clarify the mechanism of quantitatively regulating ketone for enhanced visible-light photocatalytic performance of CTFs. As ketone content increased, the bandgap narrowed, electron-hole recombination decreased, charge transfer and quantum yield increased. As a result, keto-CTF outperformed other keto-CTFs in visible-light photocatalytic degradation of tetracycline, and apparent rate constant of TC (k_obs) was 3.69 times higher than that of CTF. Importantly, ketone tuning induced varied types and concentrations of reactive species. Integrated with quantitative structure-activity relationships (QSARs) analysis and density functional theory (DFT) calculations, this study unravels how ketone content regulates bandgap structure of CTF, affects the contribution of varied reactive species, and quantitatively enhances the photocatalytic performance of CTFs. It also provides novel insights into the precise design and synthesis of CTFs-based catalyst structures for high-efficient visible-light photocatalytic degradation of organic pollutants.

Precisely Constructed Metal Sulfides with Localized Single-Atom Rhodium for Photocatalytic C-H Activation and Direct Methanol Coupling to Ethylene Glycol

Although there are many studies on photocatalytic environmental remediation, hydrogen evolution, and chemical transformations, less success has been achieved for the synthesis of industrially important and largely demanded bulk chemicals using semiconductor photocatalysis, which holds great potential to drive unique chemical reactions that are difficult to implement by the conventional heterogeneous catalysis. The performance of semiconductors used for photochemical synthesis is, however, usually unsatisfactory due to limited efficiencies in light harvesting, charge-carrier separation, and surface reactions. The precise construction of heterogeneous photocatalysts to facilitate these processes is an attractive but challenging goal. Here, single-atom rhodium-doped metal sulfide nanorods composed of alternately stacked wurtzite/zinc-blende segments are successfully designed and fabricated, which demonstrate record-breaking efficiencies for visible light-driven preferential activation of C-H bond in methanol to form ethylene glycol (EG), a key bulk chemical used for the production of polyethylene terephthalate (PET) polymer. The wurtzite/zinc-blende heterojunctions lined regularly in one dimension accelerate the charge-carrier separation and migration. Single-atom rhodium selectively deposited onto the wurtzite segment with photogenerated holes accumulated facilitates methanol adsorption and C-H activation. The present work paves the way to harnessing photocatalysis for bulk chemical synthesis with structure-defined semiconductors.

Increased photocorrosion resistance of ZnO foams via transition metal doping

ZnO is a widely studied photocatalyst, but practical use is hindered by its low resistance to photocorrosion in water, which leads to metal leaching and loss of performance over time. In this work, highly porous and mechanically stable ZnO foams, called MolFoams, were doped by adding 1% or 2% Co, Ni or Cu salts to the starting Zn salt, followed by air insufflation during a sol-gel rection and sintering. The resulting doped foams showed a major increase in stability, with a 60-85% reduction in Zn²⁺ leaching after irradiation, albeit with a reduction in photocatalytic activity. A systematic analysis using XRD, Raman, XPS and XANES allowed for the identification of dopant species in the foams revealing the presence of Co₃O₄, NiO and Cu₂O within the ZnO lattice with doping leading to a reduced band gap and significant increases in the resistance to photocorrosion of ZnO while identifying the cause of the reduction in photocatalytic activity to be shifting of the band edge positions. These results provide a pathway to significantly reduce the photocorrosion of ZnO in water, with further work required to maintain the photocatalytic activity of undoped ZnO.

Perovskite LaNiO3/Ag3PO4 heterojunction photocatalyst for the degradation of dyes

Pristine lanthanum nickelate (LaNiO₃), silver phosphate (Ag₃PO₄) and perovskite lanthanum nickelate silver phosphate composites (LaNiO₃/Ag₃PO₄) were prepared using the facile hydrothermal method. Three composites were synthesized by varying the percentage of LaNiO₃ in Ag₃PO₄. The physical properties of as-prepared samples were studied by powder X-ray diffraction (pXRD), Fourier-transform infrared (FT-IR), Scanning electron microscopy (SEM) and Energy-dispersive X-ray (EDX). Among all synthesized photocatalysts, 5%LaNiO₃/Ag₃PO₄ composite has been proved to be an excellent visible light photocatalyst for the degradation of dyes i.e., rhodamine B (RhB) and methyl orange (MO). The photocatalytic activity and stability of Ag₃PO₄ were also enhanced by introducing LaNiO₃ in Ag₃PO₄ heterojunction formation. Complete photodegradation of 50 mg/L of RhB and MO solutions using 25 mg of 5%LaNiO₃/Ag₃PO₄ photocatalyst was observed in just 20 min. Photodegradation of RhB and MO using 5%LaNiO₃/Ag₃PO₄ catalyst follows first-order kinetics with rate constants of 0.213 and 0.1804 min^-1, respectively. Perovskite LaNiO₃/Ag₃PO₄ photocatalyst showed the highest stability up to five cycles. The photodegradation mechanism suggests that the holes ( h ⁺) and superoxide anion radicals O 2   • - plays a main role in the dye degradation of RhB and MO.

Constructing Active Sites on Self-Supporting Ti3C2Tx (T = OH) Nanosheets for Enhanced Photocatalytic CO2 Reduction into Alcohols

Ti3C2Tx (T = OH) was first prepared from Ti3AlC2 by HF etching and applied into a photocatalytic CO2 reduction. Then, the Ti3C2Tx nanosheets present interbedded a self-supporting structure and extended interlayer spacing. Meanwhile, the Ti3C2Tx nanosheets are decorated with abundant oxygen-containing functional groups in the process of etching, which not only serve as active sites but also show efficient charge migration and separation. Among Ti3C2Tx materials prepared by etching for different times, Ti3C2Tx-36 (Etching time: 36 h) showed the best performance for photoreduction of CO2 into alcohols (methanol and ethanol), giving total yield of 61 μmol g catal.−1, which is 2.8 times than that of Ti3AlC2. Moreover, excellent cycling stability for CO2 reduction is beneficial from the stable morphology and crystalline structure. This work provided novel sights into constructing surface active sites controllably.

Accelerating Electron-Transfer Dynamics by TiO2 -Immobilized Reversible Single-Atom Copper for Enhanced Artificial Photosynthesis of Urea

Photocatalysis as a sustainable technology is expected to provide a novel sight for the green synthesis of urea directly using N₂ , CO₂ , and H₂ O under mild conditions. However, the fundamental issue of inefficient electron transfer in photocatalysis strongly hinders its feasibility, especially for the above multi-electron-demanding urea synthesis. Herein, an effective strategy of accelerating electron-transfer dynamics is reported by TiO₂ -immobilized reversible single-atom copper (denoted as Cu SA-TiO₂ ) to enhance the performance for photosynthesis of urea from N₂ , CO₂ , and H₂ O. As revealed by a series of quasi-in-situ characterizations (e.g., electron paramagnetic resonance, and wavelength-resolved and femtosecond time-resolved spectroscopies), the expedited dynamics behaviors originating from reversible single-atom copper in as-designed Cu SA-TiO₂ (electron extraction rate: over 30 times faster than the reference photocatalysts) allow the assurance of abundant and continual photogenerated electrons for multi-electron-demanding co-photoactivation of N₂ and CO₂ , resulting in considerable rates of urea production. The strategy above for improving the photoelectron-extraction ability of photocatalysts will offer a high-efficiency and promising route for artificial urea photosynthesis and other multi-electron-demanding photocatalytic reactions.

Bioinspired Micro/Nanostructured Polyethylene/Poly(Ethylene Oxide)/Graphene Films with Robust Superhydrophobicity and Excellent Antireflectivity for Solar-Thermal Power Generation, Thermal Management, and Afterheat Utilization

The rational utilization and circulation of multiple energy sources is an effective way to address the crises of energy shortages and environmental pollution. Herein, microextrusion compression molding, an industrialized polymer molding technology that combines melt blending and compression molding, is proposed for the mass production of a bioinspired micro/nanostructured polyethylene/poly(ethylene oxide)/graphene (MN-PPG) film. The MN-PPG film exhibits robust shape stability, high storage energy density, and excellent thermal management capability owing to the cocontinuous network formed by poly(ethylene oxide) and the polyethylene matrix. The MN-PPG film has sufficient photothermal property due to the uniformly dispersed graphene nanosheets and the bioinspired surface micro/nanostructures. Interestingly, the MN-PPG film surface exhibits durable superhydrophobicity, acid/alkali resistance, and active deicing performance. Further, a multifunctional energy harvesting and circulation system was established by integrating the MN-PPG film, an LED chip, and a thermoelectric module. The hybrid system produced an open-circuit voltage of 315.4 mV and power output of 2.5 W m^-2 under 3 sun irradiation. Furthermore, the afterheat generated by the LED chips at night can be converted into electricity through thermoelectric conversion. The proposed method enables the large-scale fabrication of multifunctional phase change composites for energy harvesting in harsh environments.

Immobilized BiOCl0.75I0.25/g-C3N4 nanocomposites for photocatalytic degradation of bisphenol A in the presence of effluent organic matter

The BiOCl_0.75I_0.25/g-C₃N₄ nanosheet (BCI-CN) was successfully immobilized on polyolefin polyester fiber (PPF) through the hydrothermal method. The novel immobilized BiOCl_0.75I_0.25/g-C₃N₄ nanocomposites (BCI-CN-PPF) were characterized by scanning electron microscope (SEM), energy dispersive spectroscopy EDS, X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and UV-vis diffuse reflectance spectroscopy (UV-vis DRS) to confirm that BCI-CN was successfully immobilized on PPF with abundant oxygen vacancies reserved. Under simulated solar light irradiation, 100 % of bisphenol A (BPA) with an initial concentration of 10 mg·L^-1 was degraded by BCI-CN-PPF (0.2 g·L^-1 of BCI-CN immobilized) after 60 min. A similar photocatalytic efficiency of BPA was obtained in the presence of effluent organic matter (EfOM). The photocatalytic degradation of BPA was not affected by EfOM <5 mg-C/L. In comparison, the photocatalytic performance was considerably inhibited by EfOM with a concentration of 10 mg-C/L. Furthermore, photogenerated holes and superoxide radicals predominated in the photocatalytic degradation processes of BPA. The total organic carbon (TOC) removal efficiencies of BPA and EfOM were 75.2 % and 50 % in the BCI-CN-PPF catalytic system. The BPA removal efficiency of 94.9 % was still achieved in the eighth cycle of repeated use. This study provides a promising immobilized nanocomposite with high photocatalytic activity and excellent recyclability and reusability for practical application in wastewater treatment.

Research progress in metal sulfides for photocatalysis: From activity to stability

Metal sulfides are a type of reduction semiconductor photocatalysts with narrow bandgap and negative conduction band potential, which make them have unique photocatalytic performance in solar-to-fuel conversion and environmental purification. However, metal sulfides also suffer from low quantum efficiency and photocorrosion. In this review, the strategies to improve the photocatalytic activity of metal sulfide photocatalysts by stimulating the charge separation and improving light-harvesting ability are introduced, including morphology control, semiconductor coupling and surface modification. In addition, the recent research progress aiming at improving their photostability is also illustrated, such as, construction of hole transfer heterojunctions and deposition of hole transfer cocatalysts. Based on the electronic band structures, the applications of metal sulfides in photocatalysis, namely, hydrogen production, degradation of organic pollutants and reduction of CO₂, are summarized. Finally, the perspectives of the promising future of metal-sulfide based photocatalysts and the challenges remaining to overcome are also presented.

Remediation of pesticides using TiO2 based photocatalytic strategies: A review

Nowadays, pesticides are regarded as the most dangerous of the various organic pollutants, posing substantial environmental and human threats worldwide. Pesticide contamination has become one of the most crucial environmental issues due to its bio-persistence and bioaccumulation. Different conventional methods are being utilized for pesticide removal, yet pesticides are thought to be significantly present in the environment. The development and application of sophisticated wastewater treatment methods are being pursued to remove contaminants effectively, particularly pesticides. In the past several decades, nanoscience and nanotechnology have emerged as essential tools for the identification, removal, and mineralization of persistent pesticides by employing advanced nanomaterials such as pristine titanium dioxide (TiO₂), doped TiO₂, nanocomposites (NCs) TiO₂, and ternary nanocomposites (TNCs) TiO₂ by advanced oxidation processes (AOPs). Advancement in the characteristics of TiO₂ by doping, co-doping, construction of NCs and TNCs has contributed to the dramatic efficiency up-gradation by reducing band gap, solar active photocatalyst, enhancing PCA, high photostability, chemically inertness and multiple time reusability. Based on previous literature, utilizing La-TiO₂ NCs photocatalyst, the mineralization of pesticide (imidacloprid) attained up to 98.17% that is almost 40-53% greater than pristine TiO₂. The present review attempt to discuss the recent research performed on TiO₂ based nanoparticles (NPs) and NCs for photocatalytic mineralization of various pesticides. The basic mechanism of TiO₂ photocatalysis, types of reactors used for photocatalysis, and optimized experimental conditions of TiO₂ for pesticides mineralization are discussed.