Achieving Fast and Durable Lithium Storage through Amorphous FeP Nanoparticles Encapsulated in Ultrathin 3D P-Doped Porous Carbon Nanosheets

Grid-Like Structured Sb@DNC Anode by Self-Sacrificial Etching for Fast and Durable Sodium Storage

Alloying-type materials are promising anodes for sodium storage due to high specific capacities and appropriate redox potentials, but their practical application is impeded by rapid capacity decay from volume change during sodium ion insertion/extraction. Hence, a dual-type N-doped carbon-confined antimony (Sb) nanoparticle (Sb@DNC, where DNC contains an outer N-doped carbon armor and an inner N-doped grid-like carbon skeleton) anode material is fabricated via a self-sacrificial etching strategy to address this challenge. Specifically, the dual-type N-doped carbon matrix can prevent the agglomeration and precipitation of Sb particles, increase a large number of reactive active sites, alleviate severe volume expansion/contraction, and construct a highly interconnected electron/ion transport network. Benefiting from the exquisite structure, the Sb@DNC electrode exhibits excellent cycling stability (2400 cycles at 1.0 A g-1) and astonishing high-rate performance (331.0 mAh g-1 at 10.0 A g-1). Additionally, the state-of-the-art in/ex situ technologies reveals the sodium storage mechanism of the "battery-capacitance dual-mode" and the origin of the ability to withstand continuous volumetric strain for the Sb@DNC electrode. Finally, the derived sodium-ion full cell presents outstanding practical potential. This work emphasizes the great significance of rational structural engineering strategies in the field of alloy-type anode materials for high-performance sodium-ion batteries.

Tailoring and understanding the lithium storage performance of triple-doped cobalt phosphide composites

Cobalt phosphide (CoP) with high theoretical capacity as well as ceramic-like and metal-like properties is considered as a promising anode for lithium-ion batteries (LIBs). However, the large volume change and sluggish kinetic response limit its practical application. The optimization of composition, structural control and performance regulation of CoP electrodes can be achieved by the bottom-up assembly technique of metal-organic frameworks (MOFs). Due to the effective electronic regulation and lithiophilicity brought by the multiple heteroatoms doping and the synergistic effect of the unique structure derived from MOFs, the N, O, P triple-doped carbon and CoP composites (ZCP@NOP) exhibited excellent rate capability (554.61 mAh g-1 at 2 A g-1) and cycling stability (806.7 mAh g-1 after 500 cycles at 0.5 A g-1). The essence and evolution of lithium storage mechanism in CoP electrodes are also confirmed by the ex-situ techniques. The synergistic benefits of heteroatom co-doping carbon and cobalt phosphide, such as the decrease of the diffusion energy barrier of Li-ions and the optimization of electronic structures, are highlighted in theoretical calculations. In conclusion, new thoughts and ideas for the creation of future battery anode are provided by the combination of the N, O, P co-doping and the adaptable structural adjustment technique.

Highly Graphitized Coal Tar Pitch-Derived Porous Carbon as High-Performance Lithium Storage Materials

Because of its high specific capacity and superior rate performance, porous carbon is regarded as a potential anode material for lithium-ion batteries (LIBs). However, porous carbon materials with wide pore diameter distributions suffer from low structural stability and low electrical conductivity during the application process. During this study, the calcium carbonate nanoparticle template method is used to prepare coal tar pitch-derived porous carbon (CTP-X). The coal tar pitch-derived porous carbon has a well-developed macroporous-mesoporous-microporous hierarchical porous network structure, which provides abundant active sites for Li+ storage, significantly reduces polarization and charge transfer resistance, shortens the diffusion path and promotes the rapid transport of Li+. More specifically, the CTP-2 anode shows high charge capacity (496.9 mAh g-1 at 50 mA g-1), excellent rate performance (413.6 mAh g-1 even at 500 mA g-1), and high cycling stability (capacity retention rate of about 100 % after 1,000 cycles at 2 A g-1). The clean and eco-friendly large-scale utilization of coal tar pitch will facilitate the development of high-performance anodes in the field of LIBs.

Flexible free-standing Fe-CoP-NAs/CC nanoarrays for high-performance full lithium-ion batteries

In this study, a flexible, free-standing Fe-doped CoP nanoarrays electrode for superior lithium-ion storage has been successfully fabricated. The electrode combines the advantages of a Fe-doping and a flexible carbon cloth (CC) support, resulting in a high specific capacity (1356 mAh/g at 0.2 A/g) and excellent cycling stability (1138 mAh/g after 100 cycles). The cyclic voltammetry (CV) curves at different scan rates investigate the outstanding lithium storage behavior of Fe-CoP-NAs/CC which indicates a combined influence of diffusion behavior and capacitance behavior on the electrochemical process. The galvanostatic intermittent titration technique (GITT) analyzes the diffusion kinetics of Li+ which indicates the fast diffusion kinetics in the Fe-CoP/NAs/CC anode. The assembled Fe-CoP-NAs/CC//LiFePO4 battery exhibits a remarkable capacity of 325.2 mAh/g even at 5 A/g. And the battery also has good cycle stability, and still provides 498.1 mAh/g specific capacity after 200 cycles. Moreover, the Fe-CoP-NAs/CC//LiFePO4 soft-pack battery can continuously power the LEDs when it is bent at various angles which demonstrates its potential for use in wearable devices.

Achieving high-capacity and durable sodium storage by constructing a binder-free nanotube array architecture of iron phosphide/carbon

The conversion-type anode material of iron phosphide (FeP) promises enormous prospects for Na-ion battery technology due to its high theoretical capacity and cost-effectiveness. However, the poor reaction kinetics and large volume expansion of FeP significantly degrade the sodium storage, which remains a daunting challenge. Herein, we demonstrate a binder-free nanotube array architecture constructed by FeP@C hybrid on carbon cloth as advanced anodes to achieve fast and stable sodium storage. The nanotubular structure functions in multiple roles of providing short electron/ion transport distances, smooth electrolyte diffusion channels, and abundant active sites. The carbon layer could not only pave high-speed pathways for electron conductance but also cushion the volume change of FeP. Benefiting from these structural virtues, the FeP@C anode receives a high reversible capacity of 881.7 mAh/g at 0.1 A/g, along with a high initial Coulombic efficiency of 90% and excellent rate capability and cyclability in half and full cells. Moreover, the sodium energy reaction kinetics and mechanism of FeP@C are systematically studied. The present work offers a rational design and construction of high-capacity anode materials for high-energy-density Na-ion batteries.

Reinterpreting the Intercalation-Conversion Mechanism of FeP Anodes in Lithium/Sodium-Ion Batteries from Evolution of the Magnetic Phase

Batteries with intercalation-conversion-type electrodes tend to achieve high-capacity storage, but the complicated reaction process often suffers from confusing electrochemical mechanisms. Here, we reinterpreted the essential issue about the potential of the conversion reaction and whether there is an intercalation reaction in a lithium/sodium-ion battery (LIB/SIB) with the FeP anode based on the evolution of the magnetic phase. Especially, the ever-present intercalation process in a large voltage range followed by the conversion reaction with extremely low potential was confirmed in FeP LIB, while it is mainly the conversion reaction for the sodium storage mechanism in FeP SIB. The insufficient conversion reaction profoundly limits the actual capacity to the expectedly respectable value. Accordingly, a graphene oxide modification strategy was proposed to increase the reversible capacity of FeP LIB/SIB by 99% and 132%, respectively. The results facilitate the development of anode materials with a high capacity and low operating potential.

Progress and perspectives on iron-based electrode materials for alkali metal-ion batteries: a critical review

Iron-based materials with significant physicochemical properties, including high theoretical capacity, low cost and mechanical and thermal stability, have attracted research attention as electrode materials for alkali metal-ion batteries (AMIBs). However, practical implementation of some iron-based materials is impeded by their poor conductivity, large volume change, and irreversible phase transition during electrochemical reactions. In this review we critically assess advances in the chemical synthesis and structural design, together with modification strategies, of iron-based compounds for AMIBs, to obviate these issues. We assess and categorize structural and compositional regulation and its effects on the working mechanisms and electrochemical performances of AMIBs. We establish insight into their applications and determine practical challenges in their development. We provide perspectives on future directions and likely outcomes. We conclude that for boosted electrochemical performance there is a need for better design of structures and compositions to increase ionic/electronic conductivity and the contact area between active materials and electrolytes and to obviate the large volume change and low conductivity. Findings will be of interest and benefit to researchers and manufacturers for sustainable development of advanced rechargeable ion batteries using iron-based electrode materials.

State-of-the-Art Two-Dimensional Metal Phosphides for High Performance Lithium-ion Batteries: Progress and Prospects

Lithium-ion batteries (LIBs) with high energy density, long cycle life and safety have earned recognition as outstanding energy storage devices, and have been used in extensive applications, such as portable electronics and new energy vehicles. However, traditional graphite anodes deliver low specific capacity and inferior rate performance, which is difficult to satisfy ever-increasing demands in LIBs. Very recently, two-dimensional metal phosphides (2D MPs) emerge as the cutting-edge materials in LIBs due to their overwhelming advantages including high theoretical capacity, excellent conductivity and short lithium diffusion pathway. This review summarizes the up-to-date advances of 2D MPs from typical structures, main synthesis methods and LIBs applications. The corresponding lithium storage mechanism, and relationship between 2D structure and lithium storage performance is deeply discussed to provide new enlightening insights in application of 2D materials for LIBs. Several potential challenges and inspiring outlooks are highlighted to provide guidance for future research and applications of 2D MPs.

High Entropy Pr-Doped Hollow NiFeP Nanoflowers Inlaid on N-rGO for Efficient and Durable Electrodes for Lithium-Ion Batteries and Direct Borohydride Fuel Cells

The selection and design of new electrode materials for energy conversion and storage are critical for improved performance, cost reduction, and mass manufacturing. A bifunctional anode with high catalytic activity and extended cycle stability is crucial for rechargeable lithium-ion batteries and direct borohydride fuel cells. Herein, a high entropy novel three-dimensional structured electrode with Pr-doped hollow NiFeP nanoflowers inlaid on N-rGO was prepared via a simple hydrothermal and self-assembly process. For optimization of Pr content, three (0.1, 0.5, and 0.8) different doping ratios were investigated. A lithium-ion battery assembled with NiPr0.5 FeP/N-rGO electrode achieved an outstanding specific capacity of 1.61 Ah g-1 at 0.2 A g-1 after 100 cycles with 99.3 % Coulombic efficiencies. A prolonged cycling stability of 1.02 Ah g-1 was maintained even after 1000 cycles at 0.5 A g-1 . In addition, a full cell battery with NiPr0.5 FeP/N-rGO∥LCO (Lithium cobalt oxide) delivered a promising cycling performance of 0.52 Ah g-1 after 200 cycles at 0.15 A g-1 . Subsequently, the NiPr0.5 FeP/N-rGO electrode in a direct borohydride fuel cell showed the highest peak power density of 93.70 mW cm-2 at 60 °C. Therefore, this work can be extended to develop advanced electrode for next-generation energy storage and conversion systems.

Amorphous Materials for Lithium-Ion and Post-Lithium-Ion Batteries

Lithium-ion and post-lithium-ion batteries are important components for building sustainable energy systems. They usually consist of a cathode, an anode, an electrolyte, and a separator. Recently, the use of solid-state materials as electrolytes has received extensive attention. The solid-state electrolyte materials (as well as the electrode materials) have traditionally been overwhelmingly crystalline materials, but amorphous (disordered) materials are gradually emerging as important alternatives because they can increase the number of ion storage sites and diffusion channels, enhance solid-state ion diffusion, tolerate more severe volume changes, and improve reaction activity. To develop superior amorphous battery materials, researchers have conducted a variety of experiments and theoretical simulations. This review highlights the recent advances in using amorphous materials (AMs) for fabricating lithium-ion and post-lithium-ion batteries, focusing on the correlation between material structure and properties (e.g., electrochemical, mechanical, chemical, and thermal ones).  We  review both the conventional and the emerging characterization methods for analyzing AMs and present the roles of disorder in influencing the performances of various batteries such as those based on lithium, sodium, potassium, and zinc. Finally,  we  describe the challenges and perspectives for commercializing rechargeable AMs-based batteries.

Rational design of N-doped C-encapsulated flower-like nickel-based heterostructured microsphere anodes for high-capacity and stable lithium storage

Designing a unique morphology and nanoarchitecture with a heterostructure is regarded as an efficient strategy to achieve lithium-ion batteries (LIBs) with high capacity and cycle life. Herein, N-doped C-encapsulated flower-like NiS/Ni3(BO3)2 heterostructures (NiS/Ni3(BO3)2/NC) with a core-shell morphology are successfully synthesized by a facile general method to improve the rate performance and prolong the cycle life of LIBs. The coated NC layer and core-shell structure with elasticity can relieve the volume expansion during the lithiation/delithiation process to strengthen the stability of the structure. Moreover, the NC layer and NiS/Ni3(BO3)2/NC heterostructure can enhance the electronic conductivity of the electrode and guarantee fast and unimpeded electron transfer channels, thereby improving the electrochemical reaction kinetics. Owing to the synergy of heterostructures and core-shell layer, the as-synthesized NiS/Ni3(BO3)2/NC anode acquires a specific charge capacity of 549 mA h g-1 at 0.2 A g-1 after 100 cycles; meanwhile, a reversible capacity of 322 mA h g-1 can be maintained even at 1 A g-1 after 500 cycles. This study develops a universal interface manipulation strategy for the synthesis of M3B2O6-based or/and other advanced transition metal compound anode materials for the practical applications of LIBs.

A Metal-Organic Framework-Derived Strategy for Constructing Synergistic N-Doped Carbon-Encapsulated NiCoP@N-C-Based Anodes toward High-Efficient Lithium Storage

Transition metal phosphides (TMPs) have been regarded as the prospective anodes for lithium-ion batteries (LIBs). However, their poor intrinsic conductivity and inevitable large volume variation result in sluggish redox kinetics and the collapse of electrode structure during cycling, which substantially hinders their practical use. Herein, an effective composite electrodes design strategy of "assembly and phosphorization" is proposed to construct synergistic N-doped carbon-encapsulated NiCoP@N-C-based composites, employing a metal-organic frameworks (MOFs) as sacrificial hosts. Serving as the anodes for LIBs, one representative P-NCP-NC-600 electrode exhibits high reversible capacity (858.5 mAh g-1 , 120 cycles at 0.1 A g-1 ) and superior long-cycle stability (608.7 mAh g-1 , 500 cycles at 1 A g-1 ). The impressive performances are credited to the synergistic effect between its unique composite structure, electronic properties and ideal composition, which achieve plentiful lithium storage sites and reinforce the structural architecture. By accompanying experimental investigations with theoretical calculations, a deep understanding in the lithium storage mechanism is achieved. Furthermore, it is revealed that a more ideal synergistic effect between NiCoP components and N-doped carbon frameworks is fundamentally responsible for the realization of superb lithium storage properties. This strategy proposes certain instructive significance toward designable high-performance TMP-based anodes for high-energy density LIBs.

Synthesis and Characterization of Zinc/Iron Composite Oxide Heterojunction Porous Anode Materials for High-Performance Lithium-Ion Batteries

Environmental pollution caused by the use of fossil fuels is becoming increasingly serious, necessitating the adoption of clean energy solutions. Lithium-ion batteries (LIBs) have attracted great attention due to their high energy density and currently occupy a dominant commercial position. Metal oxide materials have emerged as promising anode materials for the next generation of LIBs, thanks to their high theoretical capacity. However, the practical application of these materials is hindered by their substantial volume expansion during lithium storage and poor electrical conductivity. In this work, a zinc/iron bimetallic hybrid oxide composite, ZnO/ZnFe2O4/NC, is prepared using ZIF-8 as a precursor (ZIF-8, one of the metal organic frameworks). The N-doped porous carbon composite improves the volume change and optimizes the lithium-ion and electron transport. Meanwhile, the ZnFe2O4 and ZnO synergistically enhance the electrochemical activity of the anode through the built-in heterojunction to promote the reaction kinetics at the interface. As a result, the material delivers an excellent cycling performance of 604.7 mAh g-1 even after 300 cycles of 1000 mA g-1. This study may provide a rational design for the heterostructure and doping engineering of anodes for high-performance lithium-ion batteries.

Bidirectional manipulation of iodine redox kinetics in aqueous Fe-I2 electrochemistry

Catalyzing conversion is a promising approach to unlock the theoretical potentials of the I2/I- redox couple in aqueous Fe-I2 electrochemistry. However, most reported results only obtain one-directional efficient iodine conversion and cannot realize a balance of full reduction and reoxidation, thereby resulting in rapid capacity decay and/or low coulombic efficiency. Herein, the concept of bidirectional catalysis based on a core-shell structured composite cathode design, which accelerates the formation and the decomposition of FeI2 simultaneously during battery dynamic cycling, is proposed to regulate the Fe-I2 electrochemical reactions. Notably, the functional matrix integrates N, P co-doping and FeP nanocrystals into a carbon shell to achieve bidirectional catalysis. More specifically, the carbon shell acts as a physical barrier to effectively capture active species within its confined environment, N, P heteroatoms function better in directing the iodine reduction and FeP facilitates the decomposition of FeI2. As confirmed with in situ and ex situ analysis, the Fe-I2 cell operates a one-step but reversible I2/FeI2 pair with enhanced kinetics. Consequently, the composite cathode exhibits a reversible Fe2+ storage capability of 202 mA h g-1 with a capacity fading rate of 0.016% per cycle over 500 cycles. Further, a stable pouch cell was fabricated and yielded an energy density of 146 W h kgiodine-1. Moreover, postmortem analysis reveals that the capacity decay of the Fe-I2 cell originates from anodic degradation rather than the accumulation of inactive iodine. This study represents a promising direction to manipulate iodine redox in rechargeable metal-iodine batteries.

Constructing Hierarchical Porous MoO2 @Mo2 N@C Composite via a Confined Pyrolysis Synthetic Strategy Towards Lithium-Ion Battery Anodes

Molybdenum dioxide (MoO2 ) demonstrates a big potential toward lithium-ion storage due to its high theoretical capacity. The sluggish reaction kinetics and large volume change during cycling process, however, unavoidably lead to inferior electrochemical performance, thus failing to satisfy the requirements of practical applications. Herein, we developed a molybdenum-based oxyacid salt confined pyrolysis strategy to achieve a novel hierarchical porous MoO2 @Mo2 N@C composite. A two-step successive annealing process was proposed to obtain a hybrid phase of MoO2 and Mo2 N, which was used to further improve the electrochemical performance of MoO2 -based anode. We demonstrate that the well-dispersed MoO2 nanoparticles can ensure ample active sites exposure to the electrolyte, while conductive Mo2 N quantum dots afford pseudo-capacitive response, which conduces to the migration of ions and electrons. Additionally, the interior voids could provide buffer spaces to surmount the effect of volume change, thereby avoiding the fracture of MoO2 nanoparticles. Benefiting from the aforesaid synergies, the as-obtained MoO2 @Mo2 N@C electrode demonstrates a striking initial discharge capacity (1760.0 mAh g-1 at 0.1 A g-1 ) and decent long-term cycling stability (652.5 mAh g-1 at 1.0 A g-1 ). This work provides a new way for the construction of advanced anode materials for lithium-ion batteries.

Spatially Confined Fe7S8 Nanoparticles Anchored on a Porous Nitrogen-Doped Carbon Nanosheet Skeleton for High-Rate and Durable Sodium Storage

Iron sulfides are widely explored as anodes of sodium-ion batteries (SIBs) owing to high theoretical capacities and low cost, but their practical application is still impeded by poor rate capability and fast capacity decay. Herein, for the first time, we construct highly dispersed Fe₇S₈ nanoparticles anchored on a porous N-doped carbon nanosheet (CN) skeleton (denoted as Fe₇S₈/NC) with high conductivity and numerous active sites via facile ion adsorption and thermal evaporation combined procedures coupled with a gas sulfurization treatment. Nanoscale design coupled with a conductive carbon skeleton can simultaneously mitigate the above obstacles to obtain enhanced structural stability and faster electrode reaction kinetics. With the aid of density functional theory (DFT) calculations, the synergistic interaction between CNs and Fe₇S₈ can not only ensure enhanced Na⁺ adsorption ability but also promote the charge transfer kinetics of the Fe₇S₈/NC electrode. Accordingly, the designed Fe₇S₈/NC electrode exhibits remarkable electrochemical performance with superior high-rate capability (451.4 mAh g^-1 at 6 A g^-1) and excellent long-term cycling stability (508.5 mAh g^-1 over 1000 cycles at 4 A g^-1) due to effectively alleviated volumetric variation, accelerated charge transfer kinetics, and strengthened structural integrity. Our work provides a feasible and effective design strategy toward the low-cost and scalable production of high-performance metal sulfide anode materials for SIBs.

Influence of ZIF-9 and ZIF-12 structure on the formation of a series of new Co/N-doped porous carbon composites as anode electrodes for high-performance lithium-ion batteries

A series of new Co/N-doped porous carbon composites, denoted as Co/CZIF-9 and Co/CZIF-12, containing Co nanoparticles encapsulated in nitrogen-doped carbon matrices were prepared by annealing Co-based zeolite imidazolate framework materials, ZIF-9 and ZIF-12, as the efficient precursors at different temperatures. The structural features of the as-synthesized composites at 900 °C were determined by analytical methods with high reliability. Consequently, Co/CZIF-12_900 exhibits a high first specific discharge capacity of 971.0 mA h g^-1 at a current density of 0.1 A g^-1. Notably, the specific discharge/charge capacity of Co/CZIF-12_900 reaches about 508.8 mA h g^-1 at 0.1 A g^-1 after 100 cycles. The outstanding behaviors can be accounted for by the efficient incorporation of hetero-nitrogen doping and the Co nanoparticles within the layered structure of porous carbon, enhancing electrical conductivity and structural stability and limiting volume change during the intercalation/deintercalation of Li⁺ ions. These findings suggest that the Co/CZIF-12_900 material could be employed as a promising anode electrode for energy storage products.

Vapor-phase derived ultra-fine Bismuth nanoparticles embedded in carbon nanotube networks as anodes for sodium and potassium ion batteries

Bismuth (Bi) is a promising material as the anode for sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs) due to its characteristics such as reasonable price and high theoretical volumetric capacity (3800 mAh cm^-3). Nevertheless, considerable drawbacks have hindered the practical applications of Bi, including its relatively low electrical conductivity and inevitable volumetric change during the alloying/dealloying processes. To solve these problems, we proposed a novel design:Bi nanoparticles were synthesized via a single-step low-pressure vapor-phase reaction and embedded onto the surfaces of multi-walled carbon nanotubes (MWCNTs). After being vaporized at 650℃ and 10^-5 Pa, Bi nanoparticles less than 10 nm were uniformly distributed in the three-dimensional (3D) MWCNT networks to form a Bi/MWNTs composite. In this unique design, the nanostructured Bi can reduce the risk of structural rupture during cycling, and the structure of the MWCMT network is beneficial in shortening the electron/ion transport path. In addition, MWCNTs can improve the overall conductivity of the Bi/MWCNTs composite and prevent particle aggregation, thus improving the cycling stability and rate performance. As an anode material for SIB, the Bi/MWCNTs composite has demonstrated excellent fast charging performance with a reversible capacity of 254 mAh/g at 20 A/g. A capacity of 221mAhg^-1 after cycling at 10 A/g for 8000 cycles has also been achieved for SIB. As an anode material for PIB, the Bi/MWCNTs composite has delivered excellent rate performances with a reversible capacity of 251 mAh/g at 20 A/g. A specific capacity of 270mAhg^-1 after cycling at 1Ag^-1 for 5000 cycles has also been achieved for PIB.

Improving the rate capacity and cycle stability of FeP anodes for lithium-ion batteries via in situ carbon encapsulation and copper doping

FeP has emerged as an appealing anode material for lithium-ion batteries (LIBs) thanks to its high theoretical capacity, safe voltage platform and rich resources. Nevertheless, sluggish charge transfer kinetics, inevitable volume expansion and easy agglomeration of active materials limit its practical applications. Here, novel Cu-doped FeP@C was synthesized by a synergistic strategy of metal doping and in situ carbon encapsulation. The optimized Cu-doped FeP@C anode demonstrates a highly reversible specific capacity (920 mAh g^-1 at 0.05 A g^-1), superb rate performance (345 mAh g^-1 at 5 A g^-1) and long-term cycle stability (340 mAh g^-1 at 2 A g^-1 after 600 cycles). The electrochemical mechanism was investigated by cyclic voltammetry, kinetic analysis and DFT calculations. The results reveal that carbon frameworks can improve the conductivity and slow down the volume expansion, with highly dispersed FeP facilitating Li-ion migration during the charge and discharge processes. Additionally, Cu doping leads to rearrangement of the charge density and an additional lattice distortion in FeP, which boosts the electron mobility and enriches the surface-active sites, promoting electrochemical reaction and charge storage. This study presents a feasible and effective design for developing transition metal phosphate (TMP) anodes for high-performance LIBs.

The electrosorption behavior of shuttle-like FeP: performance and mechanism

Owing to its high electrochemical ability, the FeP is envisioned to be the potential electrode for capacitive deionization (CDI) with enhanced performance. However, it suffers from poor cycling stability due to the active redox reaction. In this work, a facile approach has been designed to prepare the mesoporous shuttle-like FeP using MIL-88 as the template. The porous shuttle-like structure not only alleviates the volume expansion of FeP during the desalination/salination process but also promotes ion diffusion dynamics by providing convenient ion diffusion channels. As a result, the FeP electrode has demonstrated a high desalting capacity of 79.09 mg g⁻¹ at 1.2 V. Further, it proves the superior capacitance retention, which maintained 84% of the initial capacity after the cycling. Based on post-characterization, a possible electrosorption mechanism of FeP has been proposed.

In this work, mesoporous shuttle-like FeP for electrosorption is prepared. As an electrode, it achieves a high salt adsorption capacity of 79.09 mg g⁻¹ and superior capacitance retention. The conversion of Fe^II to Fe^III is responsible for the removal of salty ions.

Sodium titanium phosphate nanocube decorated on tablet-like carbon for robust sodium storage performance at low temperature

Sodium-ion batteries, featuring resource abundance and similar working mechanisms to lithium-ion batteries, have gained extensive interest in both scientific exploration and industrial applications. However, the extremely sluggish reaction kinetics of charge carrier (Na+) at subzero temperatures significantly reduces their specific capacities and cycling life. Herein, this study presents a novel hybrid structure with sodium titanium phosphate (NaTi2(PO4)3, NTP) nanocube in-situ decorated on tablet-like carbon (NTP/C), which manifests superior sodium storage performances at low temperatures. At even -25 °C, a stable cycling with a specific capacity of 94.3 mAh/g can still be maintained after 200 cycles at 0.5 A/g, delivering a high capacity retention of 91.5 % compared with that at room temperature, along with an excellent rate capability. Generally, the superionic conductor structure, flat voltage plateaus, as well as the conductive carbonaceous framework can efficiently facilitate the charge transfer, accelerate the diffusion of Na+, and decrease the electrochemical polarization. Moreover, further investigations on diffusion kinetics, solid electrolyte interface layer, and the interaction between NTP and carbonaceous skeleton reveal its high Na+ diffusion coefficient, robust solid electrolyte interface, and strong electronic interaction, thus contributing to the superior capacity retentions at subzero temperatures.

In Situ Growth of CoP Nanosheet Arrays on Carbon Cloth as Binder-Free Electrode for High-Performance Flexible Lithium-Ion Batteries

Cobalt phosphide (CoP) is considered as one of the most promising candidates for anode in lithium-ion batteries (LIBs) owing to its low-cost, abundant availability, and high theoretical capacity. However, problems of low conductivity, heavy aggregation, and volume change of CoP, hinder its practical applicability. In this study, a binder-free electrode is successfully prepared by growing CoP nanosheets arrays directly on a carbon cloth (CC) via a facile one-step electrodeposition followed by an in situ phosphorization strategy. The CoP@CC anode exhibits good interfacial bonding between the CoP and CC, which can improve the conductivity of the integrated electrode. More importantly, the 3D network structure composed of CoP nanosheets and CC provides sufficient space to alleviate the volume expansion of CoP and shorten the electron/ion transport paths. Moreover, the support of CC effectively prevents the agglomeration of CoP. Based on these advantages, when CoP@CC is paired with the NCM523 cathode, the full cell delivers a high discharge capacity 919.6 mAh g^-1 (2.1 mAh cm^-2 ) after 200 cycles at 0.5 A g^-1 . The feasibility and safety of producing pouch cells are also explored, which show good flexibility and safety despite rigorous strikes (mechanical damage and severe deformations), implying a great potential for practical applications.

FeP Coated in Nitrogen/Phosphorus Co-doped Carbon Shell Nanorods Arrays as High-Rate Capable Flexible Anode for K-ion Half/Full Batteries

Building a proper flexible electrode with high cycling stability, rate capacity and initial coulombic efficiency (ICE) for flexible potassium-ion batteries (PIBs) remains a challenge. Herein, nitrogen/phosphorus co-doped carbon coated FeP nanorods arrays on carbon cloth (FeP@N, PC NRs/CC) as high-rate capable flexible self-supporting anode was successfully fabricated. The composite electrode combines the advantages of FeP nanorods arrays (FeP NRs), carbon cloth (CC) and N, P co-doped carbon shell (N, P-C), which comprehensively improves the electrochemical stability of the flexible electrode, while the open space between FeP nanorods can facilitate electrolyte impregnation and enhance K⁺ transfer, thus effectively elevating the corresponding rate capability. For the FeP@N, PC NRs/CC electrode, it delivers a reversible capacity of 388.8 mA h g^-1 at 0.5 A g^-1 up to 400 cycles. Even at 1.5 A g^-1, it can still achieve a remarkable rate capacity of 346.9 mA h g^-1. Moreover, the assembled soft-packed cell can always light the LED lights when it is bent at different angles, which exhibits excellent mechanical flexibility.

Waste PET Plastic-Derived CoNi-Based Metal-Organic Framework as an Anode for Lithium-Ion Batteries

Recycling waste PET plastics into metal-organic frameworks is conducive to both pollution alleviation and sustainable economic development. Herein, we have utilized waste PET plastic to synthesize CoNi-MOF applied to lithium battery anode materials via a low-temperature solvothermal method for the first time. The preparation process is effortless, and the sources' conversion rate can reach almost 100%. In addition, the anode performance of MOFs with various Co/Ni mole ratios was investigated. The as-synthesized Co0.8Ni-MOF exhibits excellent crystallinity, purity, and electrochemical performance. The initial discharge and charge capacities are 2496 and 1729 mAh g-1, respectively. Even after 200 cycles, the Co0.8Ni-MOF electrode can exhibit a high Coulombic efficiency of over 99%. Consequently, given the environmental and economic benefits, the Co0.8Ni-MOF derived from waste PET plastic is thought to be an appealing anode material for lithium-ion batteries.

Pseudocapacitive Vanadium Nitride Quantum Dots Modified One-Dimensional Carbon Cages Enable Highly Kinetics-Compatible Sodium Ion Capacitors

The kinetics incompatibility between battery-type anode and capacitive-type cathode for sodium ion hybrid capacitors (SIHCs) seriously hinders their overall performance output. Herein, we construct a SIHCs device by coupling with quantum grade vanadium nitride (VN) nanodots anchored in one-dimensional N/F co-doped carbon nanofiber cages hybrids (VNQDs@PCNFs-N/F) as the freestanding anode and the corresponding activated N/F co-doped carbon nanofiber cages (APCNFs-N/F) as cathode. The strong coupling of VN quantum dots with N/F co-doped 1D conductive carbon cages effectively facilitates the ion/electron transport and intercalation-conversion-deintercalation reactions, ensuring fast sodium storage to surmount aforesaid kinetics incompatibility. Additionally, density functional theory calculations cogently manifest that the abundant active sites in the VNQDs@PCNFs-N/F configuration boost the Na⁺ adsorption/reaction activity well which will promote both "intrinsic" and "extrinsic" pseudocapacitance and further improve anode kinetics. Consequently, the assembled SIHCs device can achieve high energy densities of 157.1 and 95.0 Wh kg^-1 at power densities of 198.8 and 9100.5 W kg^-1, respectively, with an ultralong cycling life over 8000 cycles. This work further verified the feasibility of kinetics-compatible electrode design strategy toward metal ion hybrid capacitors.

A unique two-phase heterostructure with cubic NiSe2 and orthorhombic NiSe2 for enhanced lithium ion storage and electrocatalysis

Two-phase heterostructures have received tremendous attention in energy-related fields as high-performance electrode materials. However, heterogeneous interfaces are usually constructed by introducing foreign elements, which disturbs the investigation of the intrinsic effect of the two-phase heterostructure. Herein, unique heterostructures constructed with orthorhombic NiSe₂ and cubic NiSe₂ phases are developed, which are embedded in in situ formed porous carbon from metal-organic frameworks (MOFs) (O/C-NiSe₂@C). Precisely-controlled selenylation of MOFs is crucial for the formation of the O/C-NiSe₂ heterostructure. The heterogeneous interfaces with lattice dislocations and charge distribution are conducive to the high-speed transfer of electrons and ions during electrochemical processes, so as to improve the electrochemical reaction kinetics for lithium-ion storage and the hydrogen evolution reaction (HER). When used as the anode of lithium-ion batteries (LIBs), O/C-NiSe₂@C shows a superior electrochemical performance to the counterparts with only the cubic phase (C-NiSe₂@C), in view of the cycling performance (719.3 mA h g^-1 at 0.1 A g^-1 for 100 cycles; 456.3 mA h g^-1 at 1 A g^-1 for 1000 cycles) and rate capabilities (344.8 mA h g^-1 at 4 A g^-1). Furthermore, O/C-NiSe₂@C also exhibits better HER properties than C-NiSe₂@C, that is, much lower overpotentials of 154 mV and 205 mV in 0.5 M H₂SO₄ and 1 M KOH, respectively, at 10 mA cm^-2, a smaller Tafel slope as well as stable electrocatalytic activities for 2000 cycles/10 h. Preliminary observations indicate that the unique orthorhombic/cubic two-phase heterostructure could significantly improve the electrochemical performance of NiSe₂ without additional modifications such as doping, suggesting the O/C-NiSe₂ heterostructure as a promising bifunctional electrode for energy conversion and storage applications.

Ultrathin Carbon-Coated Porous TiNb2O7 Nanosheets as Anode Materials for Enhanced Lithium Storage

TiNb₂O₇ has been considered as a promising anode material for next-generation high power lithium ion batteries for its relatively high theoretical capacity, excellent safety and long cycle life. However, the unsatisfactory electrochemical kinetics resulting from the intrinsic sluggish electron transport and lithium ion diffusion of TiNb₂O₇ limit its wide application. Morphology controlling and carbon coating are two effective methods for improving the electrochemical performance of electrode materials. Herein, an ultrathin carbon-coated porous TiNb₂O₇ nanosheet (TNO@C) is successfully fabricated by a simple and effective approach. The distinctive sheet-like porous structure can shorten the transport path of ions/electrons and provide more active sites for electrochemical reaction. The introduction of nanolayer carbon can improve electronic conductivity and increase the specific surface area of the porous TiNb₂O₇ nanosheets. Based on the above synergistic effect, TiNb₂O₇@C delivers an initial discharge capacity of 250.6 mAh g^-1 under current density of 5C and can be maintained at 206.9 mAh g^-1 after 1000 cycles with a capacity retention of 82.6%, both of which are superior to that of pure TiNb₂O₇. These results well demonstrate that TiNb₂O₇@C is a promising anode material for lithium ion batteries.

Controllable engineering magnetite nanoparticles dispersed in a hierarchical amylose derived carbon and reduced graphene oxide framework for lithium-ion storage

A straightforward and eco-friendly method is demonstrated to engineer magnetite (Fe₃O₄) nanoparticles well dispersed by an amorphous amylose-derived carbon (AMC) and reduced graphene oxide (RGO) framework. Naturally available amylose (AM) serves as both reducing agent for few-layered graphene oxide (GO) in the first mild redox coprecipitation system and precursor for small-sized pyrolytic AMC in the following thermal treatment. In particular, the presence of the AM molecules effectively limits the crystal growth kinetics for the akaganeite (FeOOH) in the intermediate FeOOH@AM/RGO sample, which contributes to the transformation to Fe₃O₄ nanoparticles with significantly controlled size in the final Fe₃O₄@AMC/RGO composite. As a result, both Fe₃O₄ nanoparticles and AMC domains are adjacently anchored on the larger sized RGO sheets, and a unique hierarchical structure has been engineered in the Fe₃O₄@AMC/RGO sample. Compared with the controlled Fe₃O₄@RGO sample, the Fe₃O₄@AMC/RGO composite exhibits remarkably enhanced initial coulombic efficiency, superior cycling stability and rate performance for lithium-ion storage. The mechanisms of the interaction between GO sheets and AM molecules as well as the inspiring electrochemical behaviors of the Fe₃O₄@AMC/RGO electrode have been revealed. The Fe₃O₄@AMC/RGO sample possesses good potential for scaling-up and finding applications in wider fields.

Spatial Confinement Strategy for Micelle-Size-Mediated Modulation of Mesopores in Hierarchical Porous Carbon Nanosheets with an Efficient Capacitive Response

Commercial supercapacitors using available carbon products have long been criticized for the under-utilization of their prominent specific surface area (SSA). In terms of carbonaceous electrode optimization, excessive improvement in SSA observed in the gaseous atmosphere might have little effect on the final performance because cracked/inaccessible pore alleys considerably block the direct electrolyte ion transport in a practical electrochemical environment. Herein, mesopore-adjustable hierarchically porous carbon nanosheets are fabricated based on a micelle-size-mediated spatial confinement strategy. In this strategy, hydrophobic trimethylbenzene in different volumes of the solvent can mediate the interfacial assembly with a carbon precursor and porogen segment through π-π bonding and van der Waals interaction to yield micelles with good dispersity and the diameter varying from 119 to 30 nm. With an increasing solvent volume, the corresponding diffusion coefficient (3.1-14.3 m2 s-1) of as-obtained smaller micelles increases, which makes adjacent micelles gather rapidly and then grow along the radial direction of oligomer aggregates to eventually form mesopores on hierarchically porous carbon nanosheets (MNC150-4.5). Thanks to the pore-expansion effect of trimethylbenzene, the mesoporous volume can be adjusted from 28.8 to 40.0%. Mesopores on hierarchically porous carbon nanosheets endow MNC150-4.5 with an enhanced electrochemically active surface area of 819.5 m2 g-1, which gives rise to quick electrolyte accessibility and a correspondingly immediate capacitive response of 338 F g-1 at 0.5 A g-1 in a three-electrode system. Electrolyte transport through pathways within MNC150-4.5 ultimately enables the symmetric cell to deliver a high energy output of 50.4 Wh kg-1 at 625 W kg-1 in a 14 m LiOTF electrolyte and 95% capacitance retention after 100,000 cycles, which show its superior electrochemical performance over representative carbon-based supercapacitors with aqueous electrolytes in recent literature.

Low-Temperature Synthesis of a Porous High-Entropy Transition-Metal Oxide as an Anode for High-Performance Lithium-Ion Batteries

Transition-metal oxides (TMOs) are promising anode materials for high-performance lithium-ion batteries (LIBs) because of their abundant reserves and high theoretical capacity. However, the poor conductivity, unstable solid electrolyte interface (SEI) film, and poor cycling stability still limit their practical applications. As a novel kind of anode material, a high-entropy oxide (HEO) is a single-phase crystal structure composed of multiple metal elements, demonstrating a huge potential for energy storage applications due to the synergistic effect of various metal species. Herein, we have designed the porous spinel-phase HEO (Cr0.2Fe0.2Co0.2Ni0.2Zn0.2)3O4 synthesized at low temperature by a sol-gel method. On the one hand, the unique porous nanostructure not only promotes transport of the electrolyte but also alleviates the volume change of active materials upon cycling. On the other hand, the stabilization effect of entropy can suppress the formation of cation short-range order within the crystalline structure of HEO by a lattice distortion effect, thus guaranteeing a fast lithium-ion transport and achieving an excellent electrochemical performance. As a result, the as-prepared HEO-450 electrode delivers 1022 mAh/g after 1000 cycles at 1 A/g and 220 mAh/g at an ultrahigh current density of 30 A/g, respectively.

Bi@C Nanospheres with the Unique Petaloid Core-Shell Structure Anchored on Porous Graphene Nanosheets as an Anode for Stable Sodium- and Potassium-Ion Batteries

Bismuth (Bi) has emerged as a prospective candidate as Na-ion and potassium-ion battery anodes because of its unique advantages of low cost, high theoretical gravimetric capacity (386 mAh g^-1), and superior volumetric capacity (3800 mAh cm^-3). However, the low electronic conductivity and the huge volume expansion of Bi during the alloying/dealloying reactions are extremely detrimental to cycling stability, which seriously hinder its practical application. To overcome these issues, we propose a rational design: Bi@C nanospheres with the unique petaloid core-shell structure are synthesized in one step for the first time and then combined with different contents of graphene (GR) nanosheets to form the composites Bi@C@GR. The Bi@C nanospheres with a core-shell structure are beneficial to shortening the transmission path of electrons/ions and reducing the risk from structural rupture of the particles during cycling. In addition, the combination of Bi@C nanospheres and porous GR could greatly improve the conductivity and prevent the aggregation of particles, which is conducive to better cycling stability and rate performance. Consequently, Bi@C@GR-2 presents a superior reversible capacity for sodium storage (300 mAh g^-1 over 80 cycles) and potassium storage (200 mAh g^-1 over 70 cycles) at 0.1 A g^-1. Furthermore, in situ electrochemical impedance spectroscopy and ex situ transmission electron microscopy are carried out to analyze and reflect the kinetic reaction mechanism and the phase change of the Bi@C@GR-2 electrode during the charge/discharge processes.