Journey of Aggregation-Induced Emission Research

Advances in aggregation-induced emission luminogens for biomedicine: From luminescence mechanisms to diagnostic applications

Advancements in early detection have demonstrated the significance of biomarkers as indicators of health and disease. Traditional detection methods often face limitations, such as low sensitivity and time consumption. Fluorescence-based techniques are considered promising approaches because of their noninvasiveness and rapid response. However, these conventional methods have some drawbacks, such as low quantum yield, photobleaching, and aggregation-caused quenching. Recently, aggregation-induced emission (AIE) has emerged as a potential alternative, characterized by luminous emission upon aggregation, thus improving detection sensitivity and stability. This review explores the recent advancements in AIE luminogens (AIEgens) in biomedical engineering, with a particular focus on their application in biomarker detection. Here, we discuss the different types of AIE mechanisms and their advantages in disease diagnosis and imaging. In addition, we summarize the development of various AIEgen-based probes for the detection of diverse biomarkers. Finally, we address the remaining challenges and future directions for AIE materials in modern biomedical engineering, emphasizing the potential of AIEgens in biomarker detection and disease diagnosis strategies.

Recent advances in biotin-based therapeutic agents for cancer therapy

Biotin receptors, as biomarkers for cancer cells, are overexpressed in various tumor types. Compared to other vitamin receptors, such as folate receptors and vitamin B12 receptors, biotin receptor-based targeting strategies exhibit superior specificity and broader potential in treating aggressive cancers, including ovarian cancer, leukemia, colon cancer, breast cancer, kidney cancer, and lung cancer. These strategies promote biotin transport via receptor-mediated endocytosis, which is triggered upon ligand binding. Biotin, as the ligand of the biotin receptor, can be conjugated to anti-cancer drugs to form targeted therapies that bind to receptors overexpressed on tumor cells, thus increasing drug uptake. Despite these advantages, many candidate drugs have progressed slowly and remain in the preclinical stage, impeding clinical translation. This is mainly due to the effects of various conjugation methods and drug formulations on their functionality and efficacy. Therefore, developing novel biotin-based therapeutics is crucial. The innovation of this strategy lies in its multifunctionality-researchers can use different conjugation methods to design and synthesize these drugs, enabling precise targeting of various tumor types while minimizing toxicity to normal cells. These drugs include small-molecule-biotin conjugates (SMBCs) and nano-biotin conjugates (NBCs). This dual-platform approach represents a significant advancement in targeted therapy, offering unprecedented flexibility in drug design and delivery. Compared to chemotherapy drugs and traditional delivery systems, biotin-based drugs with tumor-specific targeting demonstrate enhanced targeting, improved efficacy, and reduced toxicity. This review examines strategies and applications for enhancing the delivery of chemotherapy drugs to cancer cells, highlighting the need for high-quality conjugates and strategies. It not only summarizes the latest progress but also provides key insights into how this emerging field could revolutionize personalized cancer treatment, especially in the context of precision medicine. Additionally, it offers perspectives on future research directions in this field.

1,10-phenanthroline appended novel Schiff base as a selective fluorescent chemosensor for nerve agent stimulants

A simple, tailor-made, novel chemosensor based on 1,10-phenanthroline Schiff base incorporating N, N-Diethylamino salicylaldehyde (1) was designed and synthesized. The sensing ability of chemosensor 1 was tested via colorimetric, UV-Vis and fluorescence spectroscopy. Chemosensor 1 could effectively and specifically detect diethylchlorophosphate (DCP) in acetonitrile displaying naked eye colour change from pale yellow to dark yellow while fluorogenic colour changes from blue to pink fluorescence (365 nm UV lamp irradiation). The spectral changes corroborated the colorimetric results with appreciable bathochromic shifts of 44 and 75 nm in absorption and emission spectra respectively. With DCP, the spectral changes may be attributed to the reaction of the phosphorus group with the hydroxyl group which inhibits the ICT within the molecule. The colorimetric and spectral changes were reversed with the addition of triethylamine (TEA) signifying the reversibility of chemosensor 1. Significantly, the detection limit of 1 for DCP ions was evaluated to be 4.4 nM with the binding constant value of 1.9 × 104 M-1. Furthermore, chemosensor 1 showed excellent performance for convenient DCP detection via filter paper fabricated test strips.

An ESIPT-active orange-emissive 2-(2'-hydroxyphenyl)imidazo[1,2-a]pyridine-derived chemodosimeter for turn-on detection of fluoride ions via desilylation

Fluoride is an essential element for oral health with an optimum concentration of 0.7-1.2 ppm in drinking water, but it is detrimental at higher concentrations, causing fluorosis, acute gastric ulcer, urolithiasis, and kidney infection, which adds immense significance to its detection in water sources. In the current study, a new chemodosimeter (HIPS-Br) is designed by protecting a 2-(2'-hydroxyphenyl)imidazo[1,2-a]pyridine derivative (HIP-Br) with a fluoride recognizable tert-butyldiphenylsilane moiety and utilized for the selective detection of F- ions by an excited-state intramolecular proton transfer (ESIPT)-based fluorimetric response. The probe HIPS-Br exhibits blue fluorescence in solution, and upon the incremental addition of F- ions, it exhibits a turn-on response, exhibiting a strong orange emission at 598 nm by spontaneous cleavage of the tert-butyldiphenylsilane group to release fluorescent HIP-Br in the working solution. HIPS-Br displayed no or insignificant response towards numerous common anions, cations and small molecules, affirming its selectivity to F- ions and offered a low limit of detection (LOD) of 1.2 ppb (6.6 × 10-8 M). The real sample analysis by spiking fluorides in water and toothpaste samples showed excellent percent recoveries. The chemodosimeter was successfully utilized in the solid-phase detection of F- ions on silica-coated TLC plates and analyzed by ImageJ analysis, marking its utility in on-site quantitation purposes.

Annulated oxazolium anion-π+ AIEgens

A new class of anion-π+ AIEgens based on ring-fused annulated oxazolium architectures is reported, which can be readily synthesized via a single-step dual C-H activation annulative π-extension (APEX) protocol from simple oxazolium salts. The crucial and decisive role of anion-π+ interactions in their solid-state structural arrangement was analyzed to correlate their tunable AIE features and solid-state quantum yields.

3-Ethoxysalicylaldimine-based symmetrical azine-linked luminogen exhibiting ESIPT and bright orange colour AIE behaviour with live cell bioimaging application

Herein, we describe the design and development of a new cell-permeable aggregation-induced emission (AIE) active 3-ethoxysalicylaldimine-based symmetrical azine molecule HDBE. The synthesized compound underwent comprehensive investigation of different spectroscopic methods, like NMR, mass and single crystal X-ray diffraction analysis. The fluorophore HDBE exhibited the bright orange colour AIE behaviour in THF-H2O mixture. The drastic enhancement of emission was achieved upon adding the water to the THF solution of HDBE, with a concentration of 90%. Along with the dynamic light scattering (DLS) and quantum yield measurements, the formation of aggregates was also verified by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analysis. Further, HDBE demonstrated excited state intramolecular proton transfer (ESIPT) characteristics in different polarity of solvents, which was corroborated by absorption, emission and lifetime spectroscopical investigations. The detailed scrutiny of X-ray structure of HDBE displayed the two strong intramolecular hydrogen bonding interactions, while solid-state fluorescent spectra showed dual emission that corresponds to enol and keto form confirming the ESIPT feature. Further, the synthesized AIE molecule was non-toxic and cell-permeable, making it easy to label as a biomarker in live HeLa cells via fluorescent bioimaging. These studies offer a quick and easy way to develop both AIE and ESIPT-coupled molecules for live cell bioimaging applications.

Multi-Stimuli-Responsive Fluorescent Molecule with AIE and TICT Properties Based on 1,8-Naphthalimide

A multi-stimuli responsive fluorophore, named NBDNI, was developed by constructing a 1,8-naphthalimide derivative in which a rotatable electron-donating N,N-dimethylaniline group attached to its 4-position. This molecular structure endowed NBDNI with aggregate-induced emission (AIE) and twisted intramolecular charge transfer (TICT) properties, enabling remarkable fluorescence changes in response to multiple external stimuli: (i) sensitivity to polarity in various solvent systems and polymer matrix; (ii) significant fluorescence response and excellent linearity towards temperature changes in solution; (iii) distinct switch of fluorescence color upon acid and base treatments; (iv) reversible mechanochromism behavior in the solid state. Moreover, the mechanisms underlying the aforementioned stimuli-responsive phenomena have been proposed based on comprehensive systematic measurements. Furthermore, preliminary applications such as fluorescence thermometry and acid/base test paper have been demonstrated. This research will bring about new opportunities for the development of novel stimuli-responsive luminescent materials.

New Calamitic Mesogens Exhibiting Aggregation-Induced Emission (AIE)

Aggregation-induced emitters or AIEgens are generally signified by their stronger photoluminescence in aggregation than in the solution state. Due to high emission efficiency in aggregate and solid states and good processability, organic AIEgens drew attention to the development of advanced luminescent materials. However, as mesogenic materials self-assemble to a different molecular arrangement in different phases, achieving liquid crystallinity and AIE properties in the same molecule would provide a valuable tool to develop solvent-independent AIEgenic materials. With this goal, the present work reports the synthesis of new organic thermotropic liquid crystalline compounds exhibiting aggregation-induced emission (AIE). The synthesized compounds exhibit strong green luminescence in a solid state which sharply quenches upon entering smectic mesophase by heating. This is in addition to the exhibition of dispersion medium (solvent)-dependent emission, thus providing a dual mode of AIE. The mesogenic property of the synthesized compounds was studied by XRD, POM, and DSC. The AIE was studied by fluorescence spectroscopy and variable temperature fluorescence microscopy. A DFT study was carried out to gain an insight into the AIEgenic behavior of the material.

Biomass-derived carbon dots as emerging visual platforms for fluorescent sensing

Biomass-derived carbon dots (CDs) are non-toxic and fluorescently stable, making them suitable for extensive application in fluorescence sensing. The use of cheap and renewable materials not only improves the utilization rate of waste resources, but it is also drawing increasing attention to and interest in the production of biomass-derived CDs. Visual fluorescence detection based on CDs is the focus of current research. This method offers high sensitivity and accuracy and can be used for rapid and accurate determination under complex conditions. This paper describes the biomass precursors of CDs, including plants, animal remains and microorganisms. The factors affecting the use of CDs as fluorescent probes are also discussed, and a brief overview of enhancements made to the preparation process of CDs is provided. In addition, the application prospects and challenges related to biomass-derived CDs are demonstrated.

Tetrakispyrazolylethene: Protonation-Induced Emission

Tetrakispyrazolylethene (1) was synthesized from pyrazole and hexachloroethane through a one-step substitution reaction. The increase of emission was detected both in solid and aqueous THF solution, compared with that in anhydrous THF. While the former originates from the crystal packing, the latter is attributed to the protonation-induced emission, independent of aggregation, based on the optical measurement under varying concentrations and particle-size distribution analysis.

Graphene Oxide-Induced Prototropism and Enhancement of Fluorescence Yield of Organic Molecules in Solutions: Recent Advances

Till date, humankind has mainly acknowledged the quenching phenomenon of graphene oxide (GO). From a fundamental science standpoint, the unique and dynamic prospects of graphene oxide have been showcased in a brief but concise manner. Worldwide research studies have proven that graphene oxide has tremendous potentiality in showcasing breakthroughs in the fields of both basic science and innovative applications. In this Perspective, the fact that, apart from the very common fluorescence quenching phenomenon, graphene oxide can also enhance fluorescence intensity, promote prototropism, demonstrate aggregation-induced emission, and itself exhibit photoluminescence properties in nonaqueous media has been highlighted. It draws attention to the fact regarding unveiling the unknown properties of graphene oxide that might be useful to scientific communities in upcoming years.

A Novel NIR Fluorescence Probe with AIE Property to Image Viscosity in Nystatin-Induced Cell Model

As one of the most significant parameters in cellular microenvironment, viscosity levels could be used to determine the metabolic process of bioactive substances within cells. Abnormal viscosity levels are closely associated with a series of diseases. Therefore, the design and synthesis of fluorescent probes that can monitor changes of intracellular viscosity in real-time is of great significance for the study of disease development process. Here, a new viscosity-recognized NIR fluorescence probe W1 based on quinoline-malonitrile is synthesized, and it is not susceptible to interference substances. Besides, AIE probe W1 shows fast response, excellent photostability, low cytotoxicity, good linear relationship between fluorescence intensity value and viscosity. Based on the above advantages, probe W1 is used to image the change of viscosity level in the cell model induced by nystatin.

New type of tin(IV) complex based turn-on fluorescent chemosensor for fluoride ion recognition: elucidating the effect of molecular structure on sensing property

A novel type of chemosensor based on tin(IV) complexes incorporating hydroxyquinoline derivatives has been designed and investigated for selectively detecting fluoride ions. Sn(meq)2Cl2 (meq = 2-methyl-8-quinolinol) (complex 1) exhibits a significant enhancement in luminescence upon the introduction of fluoride ions. This enhancement greatly surpasses that observed with Snq2Cl2 and Sn(dmqo)2Cl2 (q = 8-hydroxyquinnoline; dmqo = 5,7-dimethyl-8-quinolinol). Furthermore, complex 1 displays excellent sensitivity and selectivity for fluoride detection in comparison to halides and other anions. As a result, complex 1 serves as an outstanding turn-on fluorescent chemosensor, effectively sensing fluoride ions. The Benesi-Hilderbrand method and Job's plot confirmed that complex 1 associates with F- in a 1 : 2 binding stoichiometry. Also, complex 1 exhibited a large binding constant (pKb = 10.4 M-2) and a low detection limit (100 nM). To gain a deeper insight into the photophysical properties and the underlying mechanism governing the formation of the tin(IV) fluoride complex via halide exchange, we successfully synthesized partially fluorinated Sn(meq)2F0.67Cl1.33 (2) and fully fluorinated Sn(meq)2F2 (3), all of which were characterized through computational studies, thereby elucidating their photophysical properties. DFT studies reveal that converting Sn(meq)2Cl2 to Sn(meq)2F2, an endergonic process, leads to greater stability due to reducing steric hindrance about the metal center. Furthermore, the fluorinated complex significantly increases dipole moment, resulting in high affinity toward the F- ion.

Luminescence turn-on sensor for the selective detection of trace water and methanol based on a Zn(ii) coordination polymer with 2,5-dihydroxyterephthalate

A highly selective detection of trace water in organic solvents is urgently required for the chemical industry. In this work, the simple sonochemical method was used for producing a luminescent sensor, [Zn(H2dhtp)(2,2'-bpy)(H2O)]n (Zn-CP) (H2dhtp2- = 2,5-dihydroxyterephthalate and 2,2'-bpy = 2,2'-bipyridine). Zn-CP exhibits reversible thermally-induced and methanol-mediated structural transformation. Importantly, Zn-CP has exceptional water sensing performance in both dry methanol and dry ethanol, with high selectivity, wide linear ranges, and a low limit of detection (LOD) of 0.08% (v/v). Upon the incremental addition of water, the luminescent intensities enhanced and shifted, along with the emission color changing from green to greenish yellow. In addition, Zn-CP can detect methanol selectively through turn-on luminescence intensity with LODs of 0.28, 0.52, and 0.35% (v/v) in dry ethanol, dry n-propanol, and dry n-butanol, respectively. The excited-state proton transfer of linker H2dhtp2-via enol-keto tautomerism and collaboration with structural transformation could be attributed to the sensing mechanism.

A Reversible Mechanochromic AIEgen Based on Triphenylamine for the Selective Detection of Vitamin B2 (Riboflavin) in Aqueous Media and Histotoxicity

(E)-Ethyl 2-cyano-3-(4'-(diphenyl amino)-[1,1'-biphenyl]-4-yl) acrylate (RSJ) is a novel luminogen based on triphenylamine. It has been fully synthesized and characterized, exhibiting an incredible photophysical phenomenon known as aggregation-induced emission (AIE). This work describes a fluorescent sensor that detects vitamin B2 in mixed aqueous media with high selectivity and a low limit of detection as well as a mechanism for reversible mechanochromic luminescence. Moreover, the molecule was validated for its nontoxicity in water using a histotoxicological study. Fish subjected to two different concentrations of the "novel luminogen" that displayed photophysical phenomena during sensing of vitamin B2 (riboflavin) in mixed aqueous media did not exhibit any significant differences in the structural makeup of their liver, kidney, gills, brain, and muscle tissues when compared with the control group.

Fluorescent properties in solid-state and solution of novel tricyclic derivatives of chloro/bromophenylchromanones and 2-methylpyrazoline

In this work, we reported the synthesis and spectroscopic characterization of seven novel tricyclic compounds resulting from the reaction of 3-benzylidenechromanone with Cl or Br substituent in different positions and without halogen with methylhydrazine. The structural characterization of compounds was done through different techniques i.e., FTIR,1HNMR,a single and powder X-Ray diffraction. Moreover, fluorescence quantum yield and lifetime assessed their fluorescent properties in the solid state and various solvents. Derivatives with Cl or Br substituent in positions 2 and 4 are isostructural. 4-Cl, 4-Br and 3-Cl compounds exhibit fluorescence with moderate efficiency (quantum yield 0.11-0.26) in solid state due to specific arrangements, so-called π-stack brick stone with head-to-tail self-assembly. Other crystalline compounds (2-Cl, 2-Br and 3-Br) that exhibit negligible fluorescence quantum yield have crossed V-type arrangement. In the solution, the nonhalogenated compound shows the best fluorescence efficiency. In turn, the presence of halogen atoms results in fluorescence decreasing. TD-DFT study revealed that unsubstituted compound higher emissive in solution has a different electron density distribution at HOMO and LUMO levels than less emissive substituted compounds (A3 and A3).

AIE luminogen labeled polymeric micelles for biological imaging and chemotherapy

In this study, an amphiphilic polymer FA-CS-DBA-CHO with aggregation-induced emission (AIE) feature was prepared by introducing 4-(diphenylamino)benzaldehyde derivative (DBA-CHO), imine bond and folic acid (FA) to the molecular structure of chitosan (CS). The amphiphilicity drove the polymer to self-assemble into micelles, and paclitaxel (PTX) could be solubilized in the hydrophobic core. Due to the excellent AIE effect, FA-CS-DBA-CHO exhibited strong cellular imaging capability. The pH-sensitive imine bond in the polymer allowed for accurate drug release in acidic environment. Both in vitro and in vivo studies demonstrated that the PTX-loaded FA-CS-DBA-CHO micelles could significantly inhibit the growth of tumor cells but without any notable toxicity. This micellar system was excellent carrier for bioimaging and chemotherapeutic drug delivery.

Synthesis of an aggregation-induced emission (AIE) dye with pH-sensitivity based on tetraphenylethylene-pyridine for fluorescent nanoparticles and its applications in bioimaging and in vitro anti-tumor effect

In this contribution, a novel AIE monomers 2-(4-styrylphenyl)- 1,2-diphenylvinyl)styryl)pyridine (SDVPY) with smart fluorescent pH-sensitivity basing on tetraphenylethylene-pyridine were successfully synthesized for the first time, subsequently, a series of amphiphilic copolymers PEG-PY were achieved by reversible addition-fragmentation chain transfer (RAFT) polymerization of SDVPY and poly(ethylene glycol) methacrylate (PEGMA), which would self-assemble in water solution to form core-shell nanoparticles (PEG-PY FONs) with about 150 nm diameter. The PEG-PY FONs showed obvious fluorescence response to Fe3+, HCO3- and CO32- ions in aqueous solution owing to their smart pH-sensitivity and AIE characteristics, and their maximum emission wavelength could reversibly change from 525 nm to 624 nm. The as-prepared PEG-PY FONs showed also prospective application in cells imaging with the variable fluorescence for different pH cells micro-environment. When PEG-PY copolymers self-assembled with the anti-tumor drug paclitaxel (PTX), the obtained PY-PTX FONs could effectively deliver and release PTX with pH-sensitivity, and could be easily internalized by A549 cells and located at the cytoplasm with high cytotoxicity, which was further confirmed by the Calcein-AM/PI staining of dead and alive A549 cells. Moreover, the flow cytometry results indicated that the PY-PTX FONs could obviously induce the apoptosis of A549 cells, which further showed the great potential of PY-PTX FONs in the application of tumors therapy.

An aggregation-induced emission-based ratiometric fluorescent chemosensor for Hg(II) and its application in Caenorhabditis elegans imaging

A chromone-based ratiometric fluorescent probe L2 was developed for the selective detection of Hg(II) in a semi-aqueous solution based on aggregation-induced emission (AIE) and chelation-enhanced fluorescence (CHEF) effect. The probe L2 fluoresced significantly at 498 nm in its aggregated state, and when chelated with Hg(II), the soluble state fluoresced 1-fold higher. In addition, Job's plot reveals that the probe forms a 1:1 stoichiometry complex with Hg(II) with an association constant of 9.10 × 103M-1 estimated by the BH plot. The probe L2 detects Hg(II) down to 22.47 nM without interference from other interfering ions. The FTIR, ESI mass, and DFT-based computational studies investigated the binding mechanism of probe L2 with Hg(II). Taking advantage of its AIE characteristics, the probe L2 was successfully applied for bio-capability analysis in Caenorhabditis elegans (a nematode worm) imaging of Hg(II) in a living model.

Structure and Photonic Properties of a Perylenediimide Monolayer Assembled by the Langmuir-Blodgett Technique

The photonic responses of densely packed dye molecule assemblies are strongly dependent on their organization and environment. The precise control of molecular orientations and distances relative to the substrate and to each other is thus a key point in the design of photonic molecular materials. Herein, we report the preparation of a homogeneous and well-organized single monolayer of the perylenediimide (PDI) derivative by means of the Langmuir-Blodgett technique. Its optical properties disclose an intense charge-transfer excitonic absorption band related to important intermolecular coupling. Furthermore, an important immunity to photobleaching is observed for such a molecular assembly. The dipolar orientations of the molecules along the substrate have been unambiguously determined by angle-of-incidence-resolved polarized absorption and back-focal-plane fluorescence mapping. In addition, time-resolved spectroscopy reveals a fast two-dimensional diffusion of excitons consistent with strong π-stacking of adjacent PDI molecules.

Tetrahedraphene: A Csp3 -centered 3D Molecular Nanographene Showing Aggregation-Induced Emission

The bottom-up synthesis of 3D tetrakis(hexa-peri-hexabenzocoronenyl)methane, "tetrahedraphene", is reported. This molecular nanographene constituted by four hexa-peri-hexabenzocoronene (HBC) units attached to a central sp3 carbon atom, shows a highly symmetric arrangement of the HBC units disposed in the apex of a tetrahedron. The X-ray crystal structure reveals a tetrahedral symmetry of the molecule and the packing in the crystal is achieved mostly by CH⋅⋅⋅π interactions since the interstitial solvent molecules prevent the π⋅⋅⋅π interactions. In solution, tetrahedraphene shows the same electrochemical and photophysical properties as the hexa-t Bu-substituted HBC (t Bu-HBC) molecule. However, upon water addition, it undergoes a fluorescence change in solution and in the precipitated solid, showing an aggregation induced emission (AIE) process, probably derived from the restriction in the rotation and/or vibration of the HBCs. Time-Dependent Density Functional Theory (TDDFT) calculations reveal that upon aggregation, the high energy region of the emission band decreases in intensity, whereas the intensity of the red edge emission signal increases and presents a smoother decay, compared to the non-aggregated molecule. All in all, the excellent correlation between our simulations and the experimental findings allows explaining the colour change observed in the different solutions upon increasing the water fraction.

Functional fluorescent nanomaterials for the detection, diagnosis and control of bacterial infection and biofilm formation: Insight towards mechanistic aspects and advanced applications

Infectious diseases resulting from the high pathogenic potential of several bacteria possesses a major threat to human health and safety. Traditional methods used for screening of these microorganisms face major issues with respect to detection time, selectivity and specificity which may delay treatment for critically ill patients past the optimal time. Thus, a convincing and essential need exists to upgrade the existing methodologies for the fast detection of bacteria. In this context, increasing number of newly emerging nanomaterials (NMs) have been discovered for their effective use and applications in the area of diagnosis in bacterial infections. Recently, functional fluorescent nanomaterials (FNMs) are extensively explored in the field of biomedical research, particularly in developing new diagnostic tools, nanosensors, specific imaging modalities and targeted drug delivery systems for bacterial infection. It is interesting to note that organic fluorophores and fluorescent proteins have played vital role for imaging and sensing technologies for long, however, off lately fluorescent nanomaterials are increasingly replacing these due to the latter's unprecedented fluorescence brightness, stability in the biological environment, high quantum yield along with high sensitivity due to enhanced surface property etc. Again, taking advantage of their photo-excitation property, these can also be used for either photothermal and photodynamic therapy to eradicate bacterial infection and biofilm formation. Here, in this review, we have paid particular attention on summarizing literature reports on FNMs which includes studies detailing fluorescence-based bacterial detection methodologies, antibacterial and antibiofilm applications of the same. It is expected that the present review will attract the attention of the researchers working in this field to develop new engineered FNMs for the comprehensive diagnosis and treatment of bacterial infection and biofilm formation.

Simple Donor-π-Acceptor Compounds Exhibiting Aggregation-Induced Emission as Hidden Fingerprints Detecting Agents

Latent fingerprints are a significant carrier of information for a court expert. To detect this type of forensic trace, what is necessary is a method that is easy to use, compact, and versatile. The research aimed to investigate the physicochemical properties of luminescent substances of donor-π-acceptor systems in terms of their potential use in detecting hidden fingerprints. During the research, a group of fluorene compounds consisting of the (-CH=C(CN)(COOR)) moiety was designed and successfully synthesized. The optical, electrochemical, and aggregation-induced emission properties were studied. The aggregation-induced emission of compounds has been studied in the mixture of THF (as a good solvent) and water (as a poor solvent) with different water fractions ranging from 0% to 99%. Due to the molecular structure, substances showed different affinities to organic traces. As a result, it was noticed that all compounds showed the AIE phenomenon, while during tests on latent fingerprints, it was observed that two substances had particularly forward-looking features in this field.

Diaroyl-S,N-ketene Acetals: Red-Shifted Solid-State and Aggregation-Induced Emitters from a One-Pot Synthesis

Symmetric and unsymmetric diaroyl-S,N-ketene acetals can be readily accessed in consecutive syntheses in good to excellent yields by exploiting the inherent nucleophilic character of the methine position. Different aroyl-S,N-ketene acetals as well as acid chlorides yield a library of 19 diaroyl compounds with substitution and linker pattern-tunable emission properties, leading to a significant red-shift of emission in the solid and aggregated state, which was thoroughly investigated. Additionally, the stability of the luminescent aggregates is highly increased. In a follow-up one-pot procedure, pyrazolo-S,N-ketene acetals can easily be accessed employing a nucleophilic cyclocondensation.

Molecular torsion controls the excited state relaxation pathways of multibranched tetraphenylpyrazines: effect of substitution of morpholine vs. phenoxazine

Multibranched donor-acceptor derivatives exhibiting desirable photophysical properties are efficiently used in optoelectronic devices, in which the excited state relaxation dynamics of the derivatives control the efficiency of the devices. Here, the effect of intramolecular torsion on the excited state relaxation dynamics of tetraphenylpyrazine (TPP) derivatives in non-polar (toluene) and polar (THF) solvents is investigated by substituting the electron donor of morpholine (TPP-4MOP) and phenoxazine (TPP-4PHO) leading to the planar and twisted configurations, respectively, using femtosecond and nanosecond transient absorption spectroscopy. In the steady state, TPP-4MOP showed feeble emission (ΦF ∼0.03) due to the weak donor by the delocalization of electron density supported by theoretical optimization. The TPP-4PHO exhibited strong emission (ΦF ∼0.18) in toluene compared to that in THF, in which it showed a large Stokes shift (∼9691 cm-1) with low fluorescence quantum yield (ΦF ∼0.01). The observation of large Stokes shifts, inherent nature and theoretical calculations of TPP-4PHO suggest the twisting of the dihedral angle between tetraphenylpyrazine and phenoxazine in the excited state leading to the twisted intramolecular charge transfer state (TICT). The femtosecond and nanosecond transient absorption and picosecond time-resolved emission spectra of TPP-4PHO revealed the signature of the existence of both the partial TICT and TICT states in THF leading to the triplet state. Whereas in the case of TPP-4MOP, the transient absorption spectra showed the formation of the triplet state from the local excited state without the involvement of the TICT state. Aggregation studies of TPP-4PHO in a THF and water mixture reflect the elimination of the TICT state by the restriction of intramolecular torsion in the aggregates leading to an increase of 12-fold of the fluorescence intensity along with shifting of the maximum towards the blue region. These studies revealed that the excited state relaxation pathways of the derivatives are controlled by polarity-dependent torsional motion.

Histotoxicity of AIEgen Based on Triphenylamine for the Simultaneous and Discriminatory Sensing of Hg2+ and Ag+ Directly in Aqueous Media for Environmental Applications

A newly synthesized AIEgen based on triphenylamine is fully characterized and coded as BRA for the simultaneous and discriminatory selective detection of Hg2+ and Ag+ ions directly in mixed aqueous media for the identification and purification of water with a low detection limit. Moreover, we employed BRA in histotoxicity in that when compared to the control group, fish exposed to the "novel synthesized luminogen (BRA)" that demonstrated photophysical phenomena during the "sensing of mercury and silver (heavy metals) in aqueous media" did not show any major distinguishing changes in the architecture of their gills, liver, muscle, brain, kidney, and heart tissues.

Turn-on fluorescence of ruthenium pyrene complexes in response to bovine serum albumin

Two novel pyrene triphenylphosphine ruthenium conjugates act as fluorescent turn-on beacons for serum albumin, being non-fluorescent in aqueous media but exhibiting strong emission upon binding to BSA. The selective cytotoxicity of the compounds against tumour cells is enhanced upon irradiation by UV-light, paving the way for application in photodynamic therapy under two-photon excitation.

Fluorescence Sensing of pH and p-Nitrophenol Using an AIEE Active Pyridoxal Derived Schiff Base

An easy-to-prepare aggregation-induced emission enhancement (AIEE) active Schiff base NPY was synthesized by condensing vitamin B6 cofactor pyridoxal with 3-hydroxy-2-naphthoic hydrazide, and employed for the fluorescent sensing of pH and p-nitrophenol (p-NP). The AIEE phenomenon of NPY was investigated in mixed DMSO/H2O medium. The weakly yellow-fluorescent NPY (λem = 535 nm) in pure DMSO turned to a bright cyan-fluorescent NPY (λem = 490 nm) upon addition of poor solvent water. The DLS and SEM analyses supported the self-aggregation of NPY that restricted the intramolecular rotation and activated the excited state intramolecular proton transfer (ESIPT) process. The AIEE luminogen (AIEEgen) NPY containing 90% of water fraction (fwater) was employed for the fluorescent sensing of pH. AIEEgen NPY displays three distinct fluorescent pH windows: non-fluorescent below pH 3.0 and above pH 10.0, cyan fluorescent between pH 3.0 to 8.0, and yellow fluorescent between pH 8.0 to 10.0. AIEEgen NPY was also applied for the detection of nitroaromatics in HEPES buffer (10% DMSO, 10 mM, pH 7.0). The addition of p-NP selectively quenched the fluorescent intensity of AIEEgen NPY with an estimated detection limit of 1.73 µM. The analytical utility of AIEEgen NPY was examined by quantifying p-NP in different real water samples.

Tetraphenyl-1,4-dioxin and Tetraphenyl-pyrane-4-one: Old Molecules, New Insights

Aggregation-induced emission (AIE) is a phenomenon where certain molecules or materials become highly luminescent when they aggregate or come together in a condensed state, such as a solid or a solution. Moreover, new molecules which show AIE properties are designed and synthesized for various applications like imaging, sensing, and optoelectronics. 2,3,5,6-Tetraphenylpyrazine (TPP) is one of the well-established examples of AIE. Herein, 2,3,5,6-tetraphenyl-1,4-dioxin (TPD) and 2,3,4,5-tetraphenyl-4H-pyran-4-one (TPPO), which are old molecules with TPP similarity, were studied, and new insights in terms of structure and aggregation-caused quenching (ACQ)/AIE properties were gained by means of theoretical calculations. Those calculations performed on TPD and TPPO aimed to provide a better understanding of their molecular structures and how they affect their luminescence properties. This information could be used to design new materials with improved AIE properties or to modify existing materials to overcome ACQ.

Lipidic lyotropic liquid crystals: Insights on biomedical applications

Liquid crystals (LCs) possess unique physicochemical properties, translatable into a wide range of applications. To date, lipidic lyotropic LCs (LLCs) have been extensively explored in drug delivery and imaging owing to the capability to encapsulate and release payloads with different characteristics. The current landscape of lipidic LLCs in biomedical applications is provided in this review. Initially, the main properties, types, methods of fabrication and applications of LCs are showcased. Then, a comprehensive discussion of the main biomedical applications of lipidic LLCs accordingly to the application (drug and biomacromolecule delivery, tissue engineering and molecular imaging) and route of administration is examined. Further discussion of the main limitations and perspectives of lipidic LLCs in biomedical applications are also provided. STATEMENT OF SIGNIFICANCE: Liquid crystals (LCs) are those systems between a solid and liquid state that possess unique morphological and physicochemical properties, translatable into a wide range of biomedical applications. A short description of the properties of LCs, their types and manufacturing procedures is given to serve as a background to the topic. Then, the latest and most innovative research in the field of biomedicine is examined, specifically the areas of drug and biomacromolecule delivery, tissue engineering and molecular imaging. Finally, prospects of LCs in biomedicine are discussed to show future trends and perspectives that might be utilized. This article is an ampliation, improvement and actualization of our previous short forum article "Bringing lipidic lyotropic liquid crystal technology into biomedicine" published in TIPS.

Anthracene scaffold as highly selective chemosensor for Al3+ and its AIEE activity

Fluorescent chemosensor, 3-(Anthracen-2-yliminomethyl)-benzene-1,2-diol (ANB) has been synthesized by one-step condensation of 2-aminoanthracene and 2,3-dihydroxybenzaldehyde and characterized using ¹H-NMR, FT-IR and Mass spectroscopic techniques. The probe ANB was found to be an efficient 'turn-on' fluorescence chemosensor for the selective detection of Al³⁺ ion over other metal ions in an aqueous solution. The chemosensor exhibits ~ 27-fold enhancement of emission intensity in presence of Al³⁺ ion. Fluorescence quantum values for ANB and (Al³⁺-ANB)-complex are 0.004 and 0.097, respectively. In addition, the binding constant and the limit of detection were found to be 1.22 × 10⁴ M^-1 and 0.391 µM, respectively. The chemosensor ANB binds to Al³⁺ ions in 2:1 stoichiometric ratio which was supported by Job's plot, ¹H-NMR titration and florescence titration. Fluorescence reversibility of the sensor complex was well established by adding EDTA in the same condition and a molecular INHIBIT logic gate was fabricated using this reversible nature of the sensor complex. Additionally, the chemosensor ANB shows a novel aggregation-induced enhanced emission phenomenon, where the aggregate hydrosol of ANB shows enhance emission intensity.

Aggregation-induced emission enhancement (AIEE) of tetrarhenium(I) metallacycles and their application as luminescent sensors for nitroaromatics and antibiotics

The self-assembly of tetrarhenium metallacycles [{Re(CO)₃}₂(μ-dhaq)(μ-N-N)]₂ (3a, N-N = 1,3-bis(1-butylbenzimidazol-2-yl)benzene; 3b, N-N = 1,3-bis(1-octylbenzimidazol-2-yl)benzene), (H₂-dhaq = 1,4-dihydroxy-9,10-anthraquinone) and [{Re(CO)₃}₂(μ-thaq)(μ-N-N)]₂ (4, N-N = 1,3-bis(1-butylbenzimidazol-2-yl)benzene), (H₂-thaq = 1,2,4-trihydroxy-9,10-anthraquinone) under solvothermal conditions is described. The metallacycles 3a,b and 4 underwent aggregation-induced emission enhancement (AIEE) in THF upon the incremental addition of water. TEM images revealed that metallacycle 3a in a 60% aqueous THF solution formed rectangular aggregates with a wide size distribution, while a 90% aqueous THF solution resulted in the formation of a mixture of nanorods and amorphous aggregates due to rapid and abrupt aggregation. UV-vis and emission spectral profiles supported the formation of nanoaggregates of metallacycles 3a,b and 4 upon the gradual addition of water to a THF solution containing metallacycles. Further studies indicated that these nanoaggregates were excellent probes for the sensitive and selective detection of nitro group containing picric acid (PA) derivatives as well as antibiotics.

A new fluorescent probe for sensing Al3+ ions in the solution phase and CH3COO- in the solid state with aggregation induced emission (AIE) activity

An AIE (aggregation induced emission) active probe DFP-AMQ was designed and synthesized as a hexa-coordinated N₂O donor chelator for the selective sensing of Al³⁺ colorimetrically as well as fluorimetrically with a 27-fold fluorescence enhancement for CH₃CN-H₂O (9 : 1, v/v, pH 7.2, HEPES buffer). The fluorescence enhancement occurred through the blocking of ESIPT, chelation enhanced fluorescence effect (CHEF) arose, and as a result fluorescence enhancement was observed through 1 : 1 complexation with Al³⁺ ions. Detailed spectroscopic studies including UV-Vis, FTIR, ¹H NMR, and HRMS studies were carried out to characterize the probable structure of DFP-AMQ including the complexation of DFP-AMQ with Al³⁺ ions. The spectrophotometric and spectrofluorimetric titrations revealed strong binding towards Al³⁺ and the K _d values were obtained from UV-Vis (3.26 × 10^-5 M^-1) and fluorescence titration (2.02 × 10^-5 M^-1). The limit of detection of Al³⁺ by DFP-AMQ was 1.11 μM. The quantum yields of DFP-AMQ and [DFP-AMQ-Al]⁺ were calculated to be 0.008 and 0.211, respectively. Dynamic light scattering (DLS) studies showed that the sizes of the particles increased with increasing water percentage due to aggregation. SEM (scanning electron microscopy) studies revealed interesting morphological changes in microstructures in which DFP-AMQ demonstrated a rod-like shape, which was converted to a spherical-like shape in the presence of Al³⁺ and when DFP-AMQ aggregated in H₂O it showed aggregated block-like shape. In the solid phase, DFP-AMQ with nitrate has no particular shape, but in the presence of acetate, it converts to stone-like shape. This probe (DFP-AMQ) could be employed for on-site Al³⁺ ion detection in the solid state.

Novel AIE Probe for In Situ Imaging of Protein Sulfonation to Assess Cigarette Smoke-Induced Inflammatory Damage

Cysteine sulfonic acid, a product of protein oxidative damage, is an important sign by which the body and cells sense oxidative stress. Cigarette smoke (CS) can trigger inflammatory reactions in humans that lead to higher levels of oxidative stress and reactive oxygen species (ROS) in the body. Available evidence indicates a possible relationship between protein oxidative damage and cigarette smoke, which is poorly understood due to the limitations of analytical techniques. Herein, we developed a donor-acceptor structured aggregation-induced emission (AIE) fluorescence probe H-1, which exhibited excellent optical properties for the highly sensitive and specific detection of sulfonic acid biomacromolecules. The probe could be easily synthesized by click chemistry conjugating triazole heterocycles onto a triphenylamine fluorophore, followed by a cationization reaction. Due to low cytotoxity, the probe was successfully applied for in situ imaging of intracellular protein sulfonation, achieving visualization of protein sulfonation in cigarette smoke stimulation-induced inflammatory RAW264.7 cell models. Moreover, an immunofluorescence study of the aorta and lung revealed that significant blue fluorescence signals could be observed only in CS-stimulated vascular. It indicated that CS-stimulated vascular sulfonation injury can be monitored using H-1. This study will provide an efficient method for revealing CS-induced oxidative damage-relevant diseases.

Tuning the Fluorescence in Dynamic Covalent Bonded Liquid Crystals

A series of emissive liquid crystalline materials based on salicylidene derivatives is reported and investigated with respect to their thermoresponsive and mechanochromic properties. Single-crystal analysis and temperature-dependent powder X-ray diffraction measurements allowed us to correlate the intermolecular organization of the mesogens with thermoresponsive changes in the fluorescence behavior. As a proof-of-principle study, we employed the dynamics of the imine bond in transamination reactions for postsynthetic tuning of the fluorescence behavior as a further step toward the development of adaptive materials.

Tetraphenylethene-Based Fluorescent Chemosensor with Mechanochromic and Aggregation-Induced Emission (AIE) Properties for the Selective and Sensitive Detection of Hg2+ and Ag+ Ions in Aqueous Media: Application to Environmental Analysis

It is critical to design a novel and simple bifunctional sensor for the selective and sensitive detection of ions in an aqueous media in environmental samples. As a result, in this study, tetraphenylethene hydrazinecarbothioamide (TPE-PVA), known as probe 1, was successfully synthesized and characterized as having impressive photophysical phenomena such as aggregation-induced emission (AIE) and mechanochromic properties by applying mechanical force to the solid of probe 1. The emission of the solid of probe 1 changed from turquoise blue to lemon yellow after grinding, from lemon yellow to parakeet green after annealing at 160 °C, and to arctic blue after fuming with DCM. Such characteristics could lead to a variety of applications in several fields. The probe was implemented and demonstrated remarkable selectivity and sensitivity toward mercury(II) and silver(I) ions by substantially switching off emission over other cations. Following an extensive photophysical analysis, it was discovered that detection limits (LOD) as low as 0.18344 and 0.2384 μg mL^-1 for Hg²⁺ and Ag⁺, respectively, are possible with a quantum yield (Φ) of 2.26. Probe 1 was also explored as a Hg²⁺ and Ag⁺ paper strip-based sensor and kit for practical use. The binding mechanisms of probe 1 (TPE-PVA) with Hg²⁺ and Ag⁺ were confirmed by ¹H NMR titration. These results could lead to the development of reliable onsite Hg²⁺ and Ag⁺ fluorescent probes in the future.

Clustering-Triggered Emission of EPS-605 Nanoparticles and Their Application in Biosensing

Natural carbohydrates with intrinsic luminescent properties have drawn increasing attention thanks to their fundamental importance and promising applications. To expand the range of natural nonconventional biomacromolecule luminogens and to gain deep insights into their emission mechanism, we prepared EPS-605, a naturally occurring spherical nanoparticle based on negatively charged exopolysaccharides (EPS), and studied its emission behavior. It was found that EPS-605 was highly emissive in the aggregate state, such as powder and film. Furthermore, EPS-605 aqueous solutions exhibited concentration-enhanced emission characteristics. According to fluorescence spectra and confocal images, the fluorescence phenomenon of EPS-605 was not affected by the pH value and the carbon sources. The emission behavior of EPS-605 was attributed to the clustering-triggered emission (CTE) mechanism. Moreover, EPS-605 was successfully utilized for Fe3+ detection since its fluorescence could be selectively quenched by Fe3+. It could be used to detect Fe3+ with a low limit of detection (0.06 μM) and a wide detection range from 0.05 to 250 μM. Overall, these findings not only benefit the exploitation of EPS-based nonconventional biomacromolecule luminogens, but also reveal the potential applications of EPS-605 in biosensing/bioimaging, anticounterfeiting, and encryption owing to its excellent biocompatibility, environmental friendliness, and intrinsic photoluminescence property.

Design and fabrication of chitosan-based AIE active micelles for bioimaging and intelligent delivery of paclitaxel

In this study, cetyl 4-formylbenzoate alkyl and 4-(2-hydroxyethoxy) benzophenonesalicylaldazide modified biotinylated chitosan (CS-BT-HBS-CB) featured with aggregation-induced emission (AIE) characteristic, active tumor-targeting ability and pH-responsive drug release property was designed and synthesized. The polymer was fabricated by introducing hydrophobic segment, tumor targeting ligand, acid-sensitive bond and AIE fluorophore to the backbone of chitosan. Due to its amphiphilicity, the polymer could self-assemble into micelles and encapsulate paclitaxel (PTX) to form PTX-loaded CS-BT-HBS-CB micelles. The mean size of the micelles was 167 nm, which was beneficial to the EPR effect. Moreover, with the help of above functional groups, the micelles exhibited excellent AIE effect, triggered drug release behavior by acidic condition, selective internalization by MCF-7 cells and excellent cellular imaging capability. In vivo studies revealed that the PTX-loaded CS-BT-HBS-CB micelles could enhance the antitumor efficacy with low systemic toxicity. This micellar system would be a potential candidate for cancer therapy and bioimaging.

Novel D-A chromophores with condensed 1,2,4-triazine system simultaneously display thermally activated delayed fluorescence and crystallization-induced phosphorescence

Control of photophysical properties is crucial for the continued development of electroluminescent devices and luminescent materials. Preparation and study of original molecules uncovers design rules towards efficient materials and devices. Here we have prepared 7 new compounds based on the popular donor-acceptor design used in thermally activated delayed fluorescence emitters. We introduce for the first time benzofuro[3,2-e]-1,2,4-triazine and benzothieno[3,2-e]-1,2,4-triazine acceptors which were connected to several common donors: phenoxazine, phenothiazine, carbazole and 3,6-di-tert-butylcarbazole. DFT calculations, and steady-state and time-resolved photophysical studies were conducted in solution and in solid states. While derivatives with azine moieties are non-emissive in any form, the compounds comprising 3,6-di-tert-butylcarbazole display TADF in all cases. More interestingly, the two derivatives substituted with a carbazole donor are TADF active when dispersed in a polymer matrix and phosphorescent at room temperature in neat films (microcrystalline form).

Discs to a 'Bright' Future: Exploring Discotic Liquid Crystals in Organic Light Emitting Diodes in the Era of New-Age Smart Materials

With the advent of a new decade and the paradigm shift of every sphere of urban life to virtual platforms, it has become imperative for the global researcher community to channelize efforts into upgradation of the existing display-technology. In this context, discotic liquid crystals (DLCs) are a class of self-assembling organic materials that are recently being explored in fabricating the emissive layers of organic light emitting diodes (OLEDs). With their unique inherent structural and functional properties, they have the potential to challenge the currently prevailing OLED-emitters. Yet the applications of this promising class of materials in OLEDs have not been comprehensively reviewed in literature till now. In this account, we present an overview of the developments in the field of luminescent DLC-based emitters, supported by their associated photophysical phenomena and their performance parameters as emitters in fabricated OLED devices.

Asymmetrically bridged aroyl-S,N-ketene acetal-based multichromophores with aggregation-induced tunable emission

Asymmetrically bridged aroyl-S,N-ketene acetals and aroyl-S,N-ketene acetal multichromophores can be readily synthesized in consecutive three-, four-, or five-component syntheses in good to excellent yields by several successive Suzuki-couplings of aroyl-S,N-ketene acetals and bis(boronic)acid esters. Different aroyl-S,N-ketene acetals as well as linker molecules yield a library of 23 multichromophores with substitution and linker pattern-tunable emission properties. This allows control of different communication pathways between the chromophores and of aggregation-induced emission (AIE) and energy transfer (ET) properties, providing elaborate aggregation-based fluorescence switches.

A library of 23 asymmetrically linked aroyl-S,N-ketene acetal solid-state emissive multichromophores accessed by one-pot multicomponent reactions exhibits AIE- and AIEE-active behavior as well as dual emission and potential energy transfer.

The crystal structure of 3-([1,1′-biphenyl]-2-yl)-1,2-diphenylbenzo[b]phosphole-1-oxide, C32H23OP

C32H23OP, monoclinic, P21/n (no. 14), a = 9.1869(11) Å, b = 27.940(3) Å, c = 9.6992(11) Å, β = 107.422(2)°, V = 2375.4(5) Å3, Z = 4, R gt (F) = 0.0486, wR ref (F 2) = 0.1255, T = 296 K.

Nanoparticulate Photoluminescent Probes for Bioimaging: Small Molecules and Polymers

Recent interest in research on photoluminescent molecules due to their unique properties has played an important role in advancing the bioimaging field. In particular, small molecules and organic dots as probes have great potential for the achievement of bioimaging because of their desirable properties. In this review, we provide an introduction of probes consisting of fluorescent small molecules and polymers that emit light across the ultraviolet and near-infrared wavelength ranges, along with a brief summary of the most recent techniques for bioimaging. Since photoluminescence probes emitting light in different ranges have different goals and targets, their respective strategies also differ. Diverse and novel strategies using photoluminescence probes against targets have gradually been introduced in the related literature. Among recent papers (published within the last 5 years) on the topic, we here concentrate on the photophysical properties and strategies for the design of molecular probes, with key examples of in vivo photoluminescence research for practical applications. More in-depth studies on these probes will provide key insights into how to control the molecular structure and size/shape of organic probes for expanded bioimaging research and applications.

Through-Space Interaction of Tetraphenylethylene: What, Where, and How

Electronic conjugation through covalent bonds is generally considered as the basis for the electronic transition of organic luminescent materials. Tetraphenylethylene (TPE), an efficient fluorophore with aggregation-induced emission character, fluoresces blue emission in the aggregate state, and such photoluminescence is always ascribed to the through-bond conjugation (TBC) among the four phenyl rings and the central C═C bond. However, in this work, systematic spectroscopic studies and DFT theoretical simulation reveal that the intramolecular through-space interaction (TSI) between two vicinal phenyl rings generates the bright blue emission in TPE but not the TBC effect. Furthermore, the evaluation of excited-state decay dynamics suggests the significance of photoinduced isomerization in the nonradiative decay of TPE in the solution state. More importantly, different from the traditional qualitative description for TSI, the quantitative elucidation of the TSI is realized through the atoms-in-molecules analysis; meanwhile, a theoretical solid-state model for TPE and other multirotor systems for studying the electronic configuration is preliminarily established. The mechanistic model of TSI delineated in this work provides a new strategy to design luminescent materials beyond the traditional theory of TBC and expands the quantum understanding of molecular behavior to the aggregate level.

Dynamics of Excitons in Conjugated Molecules and Organic Semiconductor Systems

The exciton, an excited electron-hole pair bound by Coulomb attraction, plays a key role in photophysics of organic molecules and drives practically important phenomena such as photoinduced mechanical motions of a molecule, photochemical conversions, energy transfer, generation of free charge carriers, etc. Its behavior in extended π-conjugated molecules and disordered organic films is very different and very rich compared with exciton behavior in inorganic semiconductor crystals. Due to the high degree of variability of organic systems themselves, the exciton not only exerts changes on molecules that carry it but undergoes its own changes during all phases of its lifetime, that is, birth, conversion and transport, and decay. The goal of this review is to give a systematic and comprehensive view on exciton behavior in π-conjugated molecules and molecular assemblies at all phases of exciton evolution with emphasis on rates typical for this dynamic picture and various consequences of the above dynamics. To uncover the rich variety of exciton behavior, details of exciton formation, exciton transport, exciton energy conversion, direct and reverse intersystem crossing, and radiative and nonradiative decay are considered in different systems, where these processes lead to or are influenced by static and dynamic disorder, charge distribution symmetry breaking, photoinduced reactions, electron and proton transfer, structural rearrangements, exciton coupling with vibrations and intermediate particles, and exciton dissociation and annihilation as well.