Clay-Based Nanocomposites as Recyclable Adsorbent toward Hg(II) Capture: Experimental and Theoretical Understanding

New Insights into Materials for Pesticide and Other Agricultural Pollutant Remediation

The increase in the world population and the intensification of agricultural practices have resulted in the release of several contaminants into the environment, especially pesticides and heavy metals. This article reviews recent advances in using adsorbent and catalytic materials for environmental decontamination. Different materials, including clays, carbonaceous, metallic, polymeric, and hybrid materials, are evaluated for their effectiveness in pollutant removal. Adsorption is an effective technique due to its low cost, operational simplicity, and possibility of adsorbent regeneration. Catalytic processes, especially those using metallic nanoparticles, offer high efficiency in degrading complex pesticides. Combining these technologies can enhance the efficiency of remediation processes, promoting a more sustainable and practical approach to mitigate the impacts of pesticides and other agricultural pollutants on the environment. Therefore, this review article aims to present several types of materials used as adsorbents and catalysts for decontaminating ecosystems affected by agricultural pollutants. It discusses recent works in literature and future perspectives on using these materials in environmental remediation. Additionally, it explores the possibilities of using green chemistry principles in producing sustainable materials and using agro-industrial waste as precursors of new materials to remove contaminants from the environment.

Mercury remediation from wastewater through its spontaneous adsorption on non-functionalized inverse spinel magnetic ferrite nanoparticles

In this study, inverse spinel cubic ferrites MFe2O4 (M = Fe2+, and Co2+) have been fabricated for the high-capacity adsorptive removal of Hg(II) ions. The PXRD analysis confirmed ferrites with the presence of residual NaCl. The surface area of Fe3O4 (Fe-F) and CoFe2O4 (Co-F) material was 69.1 and 45.2 m2 g-1, respectively. The Co-F and Fe-F showed the maximum Hg(II) adsorption capacity of 459 and 436 mg g-1 at pH 6. The kinetic and isotherms models suggested a spontaneous adsorption process involving chemical forces over the ferrite adsorbents. The Hg(II) adsorption process, probed by X-ray photoelectron spectroscopy (XPS), confirmed the interaction of Hg(II) ions with the surface hydroxyl groups via a complexation mechanism instead of proton exchange at pH 6 with the involvement of chloride ions. Thus, this study demonstrates a viable and cost-effective solution for the efficient remediation of Hg ions from wastewater using non-functionalized ferrite adsorbents. This study also systematically investigates the kinetics and isotherm mechanism of Hg(II) adsorption onto ferrites and reports one of the highest Hg(II) adsorption capacities among other ferrite-based adsorbents.

Synthesis of functional poly(amidoamine) dendrimer decorated apple residue cellulose for efficient removal of aqueous Hg(II)

Water pollution caused by Hg(II) exerts hazardous effect to the environment and public health. The design and fabrication of eco-friendly bioadsorbents for efficient removal of Hg(II) from aqueous solution is a promising strategy. Herein, a series of bioadsorbents were synthesized by the decoration of apple residue cellulose with different generation (G) Schiff base functionalized poly(amidoamine) (PAMAM) dendrimers (SA-G0/CE, SA-G1.0/CE and SA-G2.0/CE). The structures of SA-G0/CE, SA-G1.0/CE and SA-G2.0/CE were characterized and their adsorption performances were determined comprehensively by considering various factors. The maximum adsorption capacity of SA-G0/CE, SA-G1.0/CE and SA-G2.0/CE for Hg(II) are 1.18, 1.73 and 1.88 mmol·g^-1, respectively. The as-prepared bioadsorbents exhibit competitive adsorption capacity as compared with other reported adsorbents. Moreover, they exhibit remarkable adsorption selectivity toward Hg(II) with the coexistence of Ni(II), Cd(II), Mn(II), or Pb(II). The bioadsorbents display satisfactory adsorption performance in real water sample and can be reused with good regeneration property. Adsorption mechanism reveals that the functional groups of OH, -CONH-, CN and NC take part in the adsorption for Hg(II). The work not only opens a pathway to realize the reuse of apple residue, but also provides a promising strategy to construct efficient bioadsorbents for the decontamination of Hg(II) from aqueous solution.

Advancements in Clay Materials for Trace Level Determination and Remediation of Phenols from Wastewater: A Review

The wide spread of phenols and their toxicity in the environment pose a severe threat to the existence and sustainability of living organisms. Rapid detection of these pollutants in wastewaters has attracted the attention of researchers from various fields of environmental science and engineering. Discoveries regarding materials and method developments are deemed necessary for the effective detection and remediation of wastewater. Although various advanced materials such as organic and inorganic materials have been developed, secondary pollution due to material leaching has become a major concern. Therefore, a natural-based material is preferable. Clay is one of the potential natural-based sorbents for the detection and remediation of phenols. It has a high porosity and polarity, good mechanical strength, moisture resistance, chemical and thermal stability, and cation exchange capacity, which will benefit the detection and adsorptive removal of phenols. Several attempts have been made to improve the capabilities of natural clay as sorbent. This manuscript will discuss the potential of clays as sorbents for the remediation of phenols. The activation, modification, and application of clays have been discussed. The achievements, challenges, and concluding remarks were provided.

A critical review on clay-based nanocomposite particles for application of wastewater treatment

Nanotechnology plays an important function in recent environmental aspects for the elimination of contaminants in the ecosystem. In recent times, nano-clay has initiated more concentration because of its distinctive physicochemical properties and characteristics. Recently, many types of research in clay-based nanocomposite were accomplished in the elimination of pollutants from water sources. Nanocomposite materials have advanced properties useful for contaminat removal such as higher surface area, thermal stability, selectivity to remove different contaminants, improved process ability, and fast decontamination. Thus, the development of clay-based composite materials is one of the upcoming directions to use effectively in water and wastewater treatment as adsorbent nanomaterials. This paper assesses the latest achievement in clay-based nanocomposite preparation, material property analysis and function for various pollutant removals. In particular, great consideration was paid to the recent progress in clay/metallic, clay-polymer, and clay-carbon composites presenting their application in the removal of different kinds of pollutants. Moreover, the mechanism of adsorption, the challenges and future perspective were also discussed to reach the optimum performance of the nanomaterials adsorbent. It is confirmed that clay-based nanocomposite materials are more cost-effective technology than conventional treatment methods.

Adsorption behaviour of pollutants: Heavy metals, radionuclides, organic pollutants, on clays and their minerals (raw, modified and treated): A review

The increasing anthropogenic pressure results in environmental pollution and thus adversely affects the integrity of ecosystems. Consequently, various methods of removing pollutants from effluents have been developed and used to minimise this negative impact, with adsorption on clay minerals identified as the most promising approach. This review examines the adsorption of heavy metals, radionuclides, and organic pollutants on clays/clay minerals and their composites under diverse conditions and deals with the applications of these materials in the construction of engineering barriers for waste management. Additionally, we discuss the efficiency and mechanisms of pollutant adsorption on clays subjected to various treatments and modifications while describing the beneficial effects of such modification/treatment on adsorption performance, reusability, and in vivo/in vitro toxicity.

Controllable synthesis of bifunctional corn stalk cellulose as a novel adsorbent for efficient removal of Cu2+ and Pb2+ from wastewater

A corn stalk cellulose-based adsorbent with bifunctional groups of -NH-/-NH₂ and C-S/C=S for efficient removal of Cu²⁺ and Pb²⁺ was successfully synthesized. Under specific alkali and reaction conditions, 4.58 mmol/g of C-S/C=S groups were further introduced on surface of aminated cellulose with 6.99 mmol/g of amino groups. The introduced CS₂ would only participate in the esterification with -NH₂ groups to form special dithiocarbamate (DTC) structures containing -NH- groups (-NHCS₂^-). The synthesized DTC structures would not reduce total amount of -NH-/-NH₂ groups on aminated cellulose to keep its excellent adsorption performance for Cu²⁺, and the introduced appropriate number of C-S/C=S groups could ensure the efficient removal of Pb²⁺. It was suitable for removal of coexisting Cu²⁺ and Pb²⁺ with low initial concentration in real wastewater, and the removal rates were both close to 100%. The application of the bifunctional cellulose offered a novel way for purpose of 'waste treatment by waste'.

Gaseous Heptanethiol Removal by a Fe3+-Phenanthroline-Kaolinite Hybrid Material

Kaolinite functionalized by the μ-oxo Fe³⁺-phenanthroline complex (Fe⁺³Phen) was selected to test its ability to efficiently remove and store gaseous heptanethiol (HPT). Spectroscopic techniques, elemental analysis, and thermal analysis coupled with evolved gas mass spectrometry were employed to characterize the material before and after the exposure to the gas and to define the adsorption process. The amount of HPT trapped by the functionalized kaolinite after 60 days is 0.10940 moles per 100 g of kaolinite which, considering the amount of adsorbed Fe⁺³Phen (0.00114 moles per 100 g of kaolinite), means a thiol/Fe³⁺Phen molar ratio of about 100:1, a value much higher than those found in the past for Fe⁺³Phen functionalized montmorillonite and sepiolite. In addition, the process was found to be efficient also beyond 60 days. This significant removal of the smelly gas was explained by considering a continuous catalytic activity of Fe³⁺ toward the oxidation of thiol to disulfide.

Recovery of Heavy Metal Ions Using Magnetic Glycine-Modified Chitosan—Application to Aqueous Solutions and Tailing Leachate

The necessity of decontaminating effluents for the dual purpose of environmental beneficiation and valorization of low-grade resources is driving the development of new sorbents. The functionalization of biopolymers is a promising strategy for improving sorption performance. Incorporating magnetic micro-particles offers an opportunity for the facilitated recovery of spent micron-size sorbent. Combining magnetic facilities and biopolymer functionalization represents a winning strategy. Magnetic glycine-grafted chitosan (G@MChs) was synthesized for the sorption of Ni(II), Zn(II), and Hg(II) before being applied to the removal of hazardous and strategic metals from tailing leachates. The sorbent was characterized using Fourier transform infrared spectroscopy and scanning electron microscopy, before and after metal sorption. The acid–base properties of functionalized sorbent were also determined (pHPZC). Uptake kinetics were studied in mono- and multi-component solutions using different equations for kinetic modeling at optimized pH (i.e., pH0: 5.5). Langmuir and Sips equations were applied to model sorption isotherms in single-component solutions. In addition, sorption isotherms in multi-component solutions were used to evaluate the preference for selected metals. Maximum sorption capacities were 0.35 mmol Hg g−1, 0.47 mmol Zn g−1, and 0.50 mmol Ni g−1. Acidified urea solution (pH 2.7) successfully desorbs metal ions from G@MChs (desorption > 90%). The sorbent was tested for the recovery of hazardous and strategic metal ions from acidic leachates of tailings. This study demonstrates the promising performance of G@MChs for the treatment of complex metal-bearing solutions.

A self-designed versatile and portable sensing device based on smart phone for colorimetric detection

A UV-vis spectrometer, as a sort of important analytical instrument, has been widely used to analyze various substances. However, expensive equipment and skilled operators are required, which limits its broad applications for out-of-lab and daily measurements. In this work, a self-designed sensing device based on smart phone was developed as a sensitive, cost-effective, facile, and portable testing tool. The sensing device fabricated by 3D printing was used to lodge a sample solution and produce a light signal, and the optical sensor on a smart phone worked as a transducer. The light source in the device generated wide-wavelength radiation, which passed through an inner filter and only light of a designated wavelength reached the testing solution. The intensity of transmitted light was then measured by an optical sensor internally installed in most smart phones, where the signals were processed as well. The feasibility of our device was verified by detecting four kinds of common heavy metal ions in actual water samples, and the testing results showed good agreement with those obtained from the UV-vis spectrometer. This work is expected to shed some light on the construction of smart phone-based sensors, featuring decent portability, simple operation, low cost, high sensitivity, and good accuracy.

Melamine-based functionalized graphene oxide and zirconium phosphate for high performance removal of mercury and lead ions from water

Heavy metal ions are highly toxic and widely spread as environmental pollutants. This work reports the development of two novel chelating adsorbents, based on the chemical modifications of graphene oxide and zirconium phosphate by functionalization with melamine-based chelating ligands for the effective and selective extraction of Hg(ii) and Pb(ii) from contaminated water sources. The first adsorbent melamine, thiourea-partially reduced graphene oxide (MT-PRGO) combines the heavier donor atom sulfur with the amine and triazine nitrogen's functional groups attached to the partially reduced GO nanosheets to effectively capture Hg(ii) ions from water. The MT-PRGO adsorbent shows high efficiency for the extraction of Hg(ii) with a capacity of 651 mg g-1 and very fast kinetics resulting in a 100% removal of Hg(ii) from 500 ppb and 50 ppm concentrations in 15 second and 30 min, respectively. The second adsorbent, melamine zirconium phosphate (M-ZrP), is designed to combine the amine and triazine nitrogen's functional groups of melamine with the hydroxyl active sites of zirconium phosphate to effectively capture Pb(ii) ions from water. The M-ZrP adsorbent shows exceptionally high adsorption affinity for Pb(ii) with a capacity of 681 mg g-1 and 1000 mg g-1 using an adsorbent dose of 1 g L-1 and 2 g L-1, respectively. The high adsorption capacity is also coupled with fast kinetics where the equilibrium time required for the 100% removal of Pb(ii) from 1 ppm, 100 ppm and 1000 ppm concentrations is 40 seconds, 5 min and 30 min, respectively using an adsorbent dose of 1 g L-1. In a mixture of six heavy metal ions at a concentration of 10 ppm, the removal efficiency is 100% for Pb(ii), 99% for Hg(ii), Cd(ii) and Zn(ii), 94% for Cu(ii), and 90% for Ni(ii) while at a higher concentration of 250 ppm the removal efficiency for Pb(ii) is 95% compared to 23% for Hg(ii) and less than 10% for the other ions. Because of the fast adsorption kinetics, high removal capacity, excellent regeneration, stability and reusability, the MT-PRGO and M-ZrP are proposed as top performing remediation adsorbents for the solid phase extraction of Hg(ii) and Pb(ii), respectively from contaminated water.

Efficient Selective Removal of Pb(II) by Using 6-Aminothiouracil-Modified Zr-Based Organic Frameworks: From Experiments to Mechanisms

We report an efficient, reusable, and selective 6-aminothiouracil (ATA)-modified Zr(IV)-based adsorbent (defined as UiO-66-ATA(Zr)) for lead ion removal in water. The adsorption equilibrium time and the maximum sorption capacity of UiO-66-ATA(Zr) for Pb(II) are, respectively, 120 min and 386.98 mg/g at pH 4 and 298 K. The Pb(II) removal rate reaches 96% at 60 min and exceeds 99% at the equilibrium state in the pH range of 2.0-5.8. Hill and pseudo-second-order models can well describe the sorption process. Pb(II) adsorbing onto UiO-66-ATA(Zr) is an irreversible, favorable chemisorption process with multimolecule participation and film diffusion control. The calculations of density functional theory, the experimental results, and the characterization analyses suggest that the binding mechanisms are the chelation and ion-exchange/electrostatic interactions between hydroxyl/amino/sulfhydryl groups of UiO-66-ATA(Zr) and Pb(II). Besides, UiO-66-ATA(Zr) has a better affinity to Pb(II) than the coexisting ions in water and an excellent repeatability at eight cycles of adsorption. Moreover, the thermodynamic study shows that UiO-66-ATA(Zr) adsorbing Pb(II) is an endothermic reaction. Thus, UiO-66-ATA(Zr) is a prospective sorbent for Pb(II) removal under the initiative of environmental protection and water purification, and this work may also provide an idea for industrial catalysis.

MnO2 flowery nanocomposites for efficient and fast removal of mercury(ii) from aqueous solution: a facile strategy and mechanistic interpretation

MnO2 flowery nanocomposites were explored as a novel and cost effective nanoadsorbent for the fast and efficient extraction of toxic inorganic contaminants from aqueous solution.

Fabrication of novel magnetic graphene oxide nanocomposites for selective adsorption of mercury from aqueous solutions

In this work, a novel functionalized graphene oxide (GO) was used as an effective and selective adsorbent for removal of mercury (Hg²⁺). The magnetic nanocomposite adsorbent (MNA) based on GO was prepared through surface reversible addition-fragmentation chain transfer copolymerization of acrylic monomers and then the formation of Fe₃O₄ nanoparticles. The structure of MNAs was characterized by using FTIR, SEM, TEM, VSM, XRD, and nitrogen adsorption/desorption isotherms. The results of ion adsorption of MNAs demonstrated high selectivity and adsorption efficiency for Hg²⁺ in the presence of competing ions. Furthermore, the removal of Hg²⁺ obeyed a pseudo-second-order model and fitted well to the Langmuir isotherm model with the maximum Hg²⁺ uptake of 389 mg g^-1. The MNA was also confirmed as good materials for re-use and maintained 86% of its initial adsorption capacity for mercury after the fifth regeneration cycles. Finally, the experimental results demonstrated that the solution pH, ion concentration, and temperature had a major impact on Hg(II) adsorption capacity. The results indicate that the MNAs with high adsorption abilities could be very promising adsorbents for the selective recovery of ions in wastewater treatment process. Graphical abstract.

Influence of structural Al species on Cd(II) capture by iron muscovite nanoparticles

The isomorphous substitution in the structure of phyllosilicate minerals plays an important role in regulating of surface chemical properties. In this work, iron muscovite nanoparticles with various Al species were successfully prepared to explore the structural Fe and Al species on the capture of Cd(II) from solutions. The synthesized nanocrystals have irregular shapes with diameters of 10-50 nm. The incorporation of Al(III) into the iron muscovite nanostructure has slight effect on the species of Fe and the crystal phase of the products. The degree of Al(III) substituting Si(IV) in the tetrahedral sheets of the minerals obviously increased with increasing of Al doping levels. For the samples with low Al doping levels (5% and 10%), the adsorption capacity of the iron muscovite nanoparticles for Cd(II) increased slightly. With increasing of Al doping ratio to 15%, the obtained iron muscovite nanoparticles exhibited a maximal uptake of 41.4 mg g^-1 for Cd(II), which is about two times that of the undoped samples (22.8 mg g^-1). The solution pH had a slight effect on the Cd (II) capture at a wide pH range from 4 to 8. The adsorption of Cd(II) is very fast and reached a steady state within 5 min. Desorption results showed that the binding strength between Cd(II) and iron muscovite nanoparticles was obviously enhanced by incorporation of Al at a high level. The ion exchange and surface complexation are principal mechanisms in the Cd(II) capture by the iron muscovite nanomaterials with various structural Al species.

Thiophene containing microporous and mesoporous nanoplates for separation of mercury from aqueous solution

Thiophene-based novel porous polymeric nanoplates synthesized through a template free approach show high mercury capture efficiency from contaminated water and may be promising for environmental applications.