Ag/Au Nanoparticle-Loaded Paper-Based Versatile Surface-Enhanced Raman Spectroscopy Substrates for Multiple Explosives Detection

Paper/GO/e-Au flexible SERS sensors for in situ detection of tricyclazole in orange juice and on cucumber skin at the sub-ppb level: machine learning-assisted data analysis

Despite being an excellent surface enhanced Raman scattering (SERS) active material, gold nanoparticles were difficult to be loaded onto the surface of filter paper to fabricate flexible SERS substrates. In this study, electrochemically synthesized gold nanoparticles (e-AuNPs) were deposited on graphene oxide (GO) nanosheets in solution by ultrasonication, resulting in the formation of a GO/Au hybrid material. Thanks to the support of GO, the hybrid material could adhere onto the surface of filter paper, which was immersed into a GO/Au solution for 24 h and dried naturally at room temperature. The paper-based materials were then employed as substrates for a surface enhanced Raman scattering (SERS) sensing platform to detect tricyclazole (TCZ), a widely used pesticide, resulting in better sensitivity compared to the use of paper/Au SERS sensors. With the most optimal GO content of 4%, paper/GO/Au SERS sensors could achieve a limit of detection of 1.32 × 10-10 M in standard solutions. Furthermore, the filter paper-based SERS sensors also exhibited significant advantages in sample collection in real samples. On one hand, the sensors were dipped into orange juice, allowing TCZ molecules in this real sample to be adsorbed onto their SERS active surface. On the other hand, they were pasted onto cucumber skin to collect the analytes. As a result, the paper/GO/Au SERS sensors could sense TCZ in orange juice and on cucumber skin at concentrations as low as 10-9 M (∼2 ppb). In addition, a machine learning model was designed and developed, allowing the sensing system to discriminate TCZ from nine other organic compounds and predict the presence of TCZ on cucumber skin at concentrations down to 10-9 M.

Fabrication and Application of Ag@SiO2/Au Core-Shell SERS Composite in Detecting Cu2+ in Water Environment

A sensitive and simple method for detecting Cu2+ in the water source was proposed by using surface-enhanced Raman scattering spectroscopy (SERS) based on the Ag@SiO2/Au core-shell composite. The Ag@SiO2 SERS tag was synthesized by a simple approach, in which Ag nanoparticles were first embedded with Raman reporter PATP and next coated with a SiO2 shell. The Ag@SiO2 nanoparticles had strong stability even in a high-concentration salty solution, and there were no changes to their properties and appearance within one month. The Ag@SiO2/Au composite was fabricated through a controllable self-assemble process. L-cysteine was decorated on the surface of a functionalized Ag@SiO2/Au composite, as the amino and carboxyl groups of it can form coordinate covalent bond with Cu2+, which shows that the Ag@SiO2/Au composite labelled with L-cysteine has excellent performance for the detection of Cu2+ in aqueous media. In this study, the SERS detection of Cu2+ was carried out using Ag@SiO2 nanoparticles, and the limit of detection (LOD) as low as 0.1 mg/L was achieved.

Microfluidics in environmental analysis: advancements, challenges, and future prospects for rapid and efficient monitoring

Microfluidic devices have emerged as advantageous tools for detecting environmental contaminants due to their portability, ease of use, cost-effectiveness, and rapid response capabilities. These devices have wide-ranging applications in environmental monitoring of air, water, and soil matrices, and have also been applied to agricultural monitoring. Although several previous reviews have explored microfluidic devices' utility, this paper presents an up-to-date account of the latest advancements in this field for environmental monitoring, looking back at the past five years. In this review, we discuss devices for prominent contaminants such as heavy metals, pesticides, nutrients, microorganisms, per- and polyfluoroalkyl substances (PFAS), etc. We cover numerous detection methods (electrochemical, colorimetric, fluorescent, etc.) and critically assess the current state of microfluidic devices for environmental monitoring, highlighting both their successes and limitations. Moreover, we propose potential strategies to mitigate these limitations and offer valuable insights into future research and development directions.

Deep Learning Enabled SERS Identification of Gaseous Molecules on Flexible Plasmonic MOF Nanowire Films

Through the capture of a target molecule at the metal surface with a highly confined electromagnetic field induced by surface plasmon, surface enhanced Raman spectroscopy (SERS) emerges as a spectral analysis technology with high sensitivity. However, accurate SERS identification of a gaseous molecule with low density and high velocity is still a challenge due to its difficulty in capture. In this work, a flexible paper-based plasmonic metal-organic framework (MOF) film consisting of Ag nanowires@ZIF-8 (AgNWs@ZIF-8) is fabricated for SERS detection of gaseous molecules. Benefiting from its micronanopores generated by the nanowire network and ZIF-8 shell, the effective capture of the gaseous molecule is achieved, and its SERS spectrum is obtained in this paper-based flexible plasmonic MOF nanowire film. With optimal structure parameters, spectra of gaseous 4-aminothiophenol, 4-mercaptophenol, and dithiohydroquinone demonstrate that this film has good SERS performance, which could maintain obvious Raman signals within 30 days during reproducible detection. To realize SERS identification of gaseous molecules, deep learning is performed based on the SERS spectra of the mixed gaseous analyte obtained in this flexible porous film. The results point out that an artificial neural network algorithm could identify gaseous aldehydes (gaseous biomarker of colorectal cancer) in simulated exhaled breath with high accuracy at 93.7%. The integration of the flexible paper-based film sensors with deep learning offers a promising new approach for noninvasive colorectal cancer screening. Our work explores SERS applications in gaseous analyte detection and has broad potential in clinical medicine, food safety, environmental monitoring, etc.

Multi-Functional Applications of H-Glass Embedded with Stable Plasmonic Gold Nanoislands

Metal nanoparticles (MNPs) are synthesized using various techniques on diverse substrates that significantly impact their properties. However, among the substrate materials investigated, the major challenge is the stability of MNPs due to their poor adhesion to the substrate. Herein, it is demonstrated how a newly developed H-glass can concurrently stabilize plasmonic gold nanoislands (GNIs) and offer multifunctional applications. The GNIs on the H-glass are synthesized using a simple yet, robust thermal dewetting process. The H-glass embedded with GNIs demonstrates versatility in its applications, such as i) acting as a room temperature chemiresistive gas sensor (70% response for NO2 gas); ii) serving as substrates for surface-enhanced Raman spectroscopy for the identifications of Nile blue (dye) and picric acid (explosive) analytes down to nanomolar concentrations with enhancement factors of 4.8 × 106 and 6.1 × 105 , respectively; and iii) functioning as a nonlinear optical saturable absorber with a saturation intensity of 18.36 × 1015 W m-2 at 600 nm, and the performance characteristics are on par with those of materials reported in the existing literature. This work establishes a facile strategy to develop advanced materials by depositing metal nanoislands on glass for various functional applications.

Synthesis of p-Azaquinodimethane-based Quinoidal Fluorophores

Quinoidal π-conjugated systems are sought-after materials for semiconducting applications because of their rich optical and electronic characteristics. However, the analogous fluorescent compounds are extremely rare, with just two reports in the literature. Here, we present the design and development of a third series of quinoidal fluorophores [(2,5-diarylidene)-3,6-bis(hexyloxy)-2,5-dihydropyrazine (Q1-Q5)] that incorporates p-azaquinodimethane. The fluorophores are synthesized in a two-step synthetic approach employing Knoevenagel condensation of N,N-diacetyl-piperazine-2,5-dione with different aromatic aldehydes followed by O-alkylation in high yields. Q1-Q5 are strongly emissive, and by altering the aryl-substituents, the emission colors can be modulated from blue to orange. The compounds possess emission maxima (λem) at 475-555 nm in the solution state and 510-610 nm in the solid state, with fluorescence quantum yields of up to 60%. To the best of our knowledge, the reported systems are the first quinoidal dual-state emissive (solution- and solid-state) compounds. In trifluoroacetic acid, Q5 exhibits halochromic behavior, with a dramatic color change from yellow to blue. Furthermore, the preliminary fluorescent sensing studies demonstrated that Q5 could act as a selective turn-off fluorescence probe for electron-deficient picric acid (PA), with an emission quenching of >90% in the solution state. The thin-layer chromatography (TLC) strip sensor of Q5 was also designed to detect PA in water.

Magnetic Particle Spectroscopy for Point-of-Care: A Review on Recent Advances

Since its first report in 2006, magnetic particle spectroscopy (MPS)-based biosensors have flourished over the past decade. Currently, MPS are used for a wide range of applications, such as disease diagnosis, foodborne pathogen detection, etc. In this work, different MPS platforms, such as dual-frequency and mono-frequency driving field designs, were reviewed. MPS combined with multi-functional magnetic nanoparticles (MNPs) have been extensively reported as a versatile platform for the detection of a long list of biomarkers. The surface-functionalized MNPs serve as nanoprobes that specifically bind and label target analytes from liquid samples. Herein, an analysis of the theories and mechanisms that underlie different MPS platforms, which enable the implementation of bioassays based on either volume or surface, was carried out. Furthermore, this review draws attention to some significant MPS platform applications in the biomedical and biological fields. In recent years, different kinds of MPS point-of-care (POC) devices have been reported independently by several groups in the world. Due to the high detection sensitivity, simple assay procedures and low cost per run, the MPS POC devices are expected to become more widespread in the future. In addition, the growth of telemedicine and remote monitoring has created a greater demand for POC devices, as patients are able to receive health assessments and obtain results from the comfort of their own homes. At the end of this review, we comment on the opportunities and challenges for POC devices as well as MPS devices regarding the intensely growing demand for rapid, affordable, high-sensitivity and user-friendly devices.

Deep learning approach to overcome signal fluctuations in SERS for efficient On-Site trace explosives detection

Surface-enhanced Raman spectroscopy (SERS) is an improved Raman spectroscopy technique to identify the analyte under study uniquely. At the laboratory scale, SERS has realised a huge potential to detect trace analytes with promising applications across multiple disciplines. However, onsite detection with SERS is still limited, given the unwanted glitches of signal reliability and blinking. SERS has inherent signal fluctuations due to multiple factors such as analyte adsorption, inhomogeneous distribution of hotspots, molecule orientation etc. making it a stochastic process. Given these signal fluctuations, validating a signal as a representation of the analyte often relies on an expert's knowledge. Here we present a neural network-aided SERS model (NNAS) without expert interference to efficiently identify reliable SERS spectra of trace explosives (tetryl and picric acid) and a dye molecule (crystal violet). The model uses the signal-to-noise ratio approach to label the spectra as representative (RS) and non-representative (NRS), eliminating the reliability of the expert. Further, experimental conditions were systematically varied to simulate general variations in SERS instrumentation, and a deep-learning model was trained. The model has been validated with a validation set followed by out-of-sample testing with an accuracy of 98% for all the analytes. We believe this model can efficiently bridge the gap between laboratory and on-site detection using SERS.

Low-cost and flexible paper-based plasmonic nanostructure for a highly sensitive SERS substrate

The application of a noble-metal-based plasmon-enhanced substrate to detect low-concentration analytes has attracted extensive attention. Most of the substrates used in recently reported researches are based on two-dimensional structures. Hence, we prepared a higher efficiency Raman activity substrate with a filter paper structure, which not only provides more plasmonic "hot spots," but also facilitates analyte extraction and detection due to the flexibility of the paper. The preparation of the plasmonic paper substrate adopted centrifugation to deposit the alloy nanoparticles onto the paper base. The optimal particle deposition condition was found by adjusting the centrifugal force and centrifugation time. Then, the surface-enhanced Raman spectroscopy (SERS) performance of the substrate was enhanced by altering the plasmon resonance peak on the surface of the nanoparticles. The enhancement factor of this paper-based substrate was 1.55×10⁷, with high detection uniformity (10^-6 M, rhodamine 6G) and a low detection limit (10^-11 M, rhodamine 6G). Then, we applied the SERS substrate to pesticide detection; the detection limit of the thiram reached 10^-6 M. As a result, the simple and cost-effective paper-based SERS substrate obtained in this way has high detection performance for pesticides and can be used for rapid detection in the field, which is beneficial to food safety and environmental safety.

Femtosecond laser patterned silicon embedded with gold nanostars as a hybrid SERS substrate for pesticide detection

We have developed simple and cost-effective surface-enhanced Raman scattering (SERS) substrates for the trace detection of pesticide (thiram and thiabendazole) and dye (methylene blue and Nile blue) molecules. Surface patterns (micro/nanostructures) on silicon (Si) substrates were fabricated using the technique of femtosecond (fs) laser ablation in ambient air. Different surface patterns were achieved by tuning the number of laser pulses per unit area (4200, 8400, 42 000, and 84 000 pulses per mm²) on Si. Subsequently, chemically synthesized gold (Au) nanostars were embedded in these laser-patterned areas of Si to achieve a plasmonic active hybrid SERS substrate. Further, the SERS performance of the as-prepared Au nanostar embedded Si substrates were tested with different probe molecules. The as-prepared substrates allowed us to detect a minimum concentration of 0.1 ppm in the case of thiram, 1 ppm in the case of thiabendazole (TBZ), 1.6 ppb in the case of methylene blue (MB), and 1.8 ppb in case of Nile blue (NB). All these were achieved using a simple, field-deployable, portable Raman spectrometer. Additionally, the optimized SERS substrate demonstrated ∼21 times higher SERS enhancement than the Au nanostar embedded plain Si substrate. Furthermore, the optimized SERS platform was utilized to detect a mixture of dyes (MB + NB) and pesticides (thiram + TBZ). The possible reasons for the observed additional enhancement are elucidated.

Colloidal nanomaterials for water quality improvement and monitoring

Water is the most important resource for all kind forms of live. It is a vital resource distributed unequally across different regions of the globe, with populations already living with water scarcity, a situation that is spreading due to the impact of climate change. The reversal of this tendency and the mitigation of its disastrous consequences is a global challenge posed to Humanity, with the scientific community assuming a major obligation for providing solutions based on scientific knowledge. This article reviews literature concerning the development of nanomaterials for water purification technologies, including collaborative scientific research carried out in our laboratory (nanoLAB@UA) framed by the general activities carried out at the CICECO-Aveiro Institute of Materials. Our research carried out in this specific context has been mainly focused on the synthesis and surface chemical modification of nanomaterials, typically of a colloidal nature, as well as on the evaluation of the relevant properties that arise from the envisaged applications of the materials. As such, the research reviewed here has been guided along three thematic lines: 1) magnetic nanosorbents for water treatment technologies, namely by using biocomposites and graphite-like nanoplatelets; 2) nanocomposites for photocatalysis (e.g., TiO2/Fe3O4 and POM supported graphene oxide photocatalysts; photoactive membranes) and 3) nanostructured substrates for contaminant detection using surface enhanced Raman scattering (SERS), namely polymers loaded with Ag/Au colloids and magneto-plasmonic nanostructures. This research is motivated by the firm believe that these nanomaterials have potential for contributing to the solution of environmental problems and, conversely, will not be part of the problem. Therefore, assessment of the impact of nanoengineered materials on eco-systems is important and research in this area has also been developed by collaborative projects involving experts in nanotoxicity. The above topics are reviewed here by presenting a brief conceptual framework together with illustrative case studies, in some cases with original research results, mainly focusing on the chemistry of the nanomaterials investigated for target applications. Finally, near-future developments in this research area are put in perspective, forecasting realistic solutions for the application of colloidal nanoparticles in water cleaning technologies.

Non-aqueous onion like nano-carbons from waste diesel-soot used as FRET-based sensor for sensing of nitro-phenols

Herein, a simple-functionalization method is described to prepare the oleylamine functionalized non-aqueous version of onion-like nanocarbons (ONC-OA), where ONC was isolated from the waste pollutant soot exhausted from the diesel engine. The surface group analysis of ONC-OA has been investigated via Nuclear Magnetic Resonance and X-ray Photoelectron Spectroscopy. ONC-OA shows blue fluorescence with a quantum yield of ∼6% in tetrahydrofuran (THF). The fluorescence-based sensing applications of ONC-OA has been investigated for selective sensing of toxic aromatic nitro-phenols compounds (para-nitro, dinitro, and trinitro phenols) from the tested many nitro organic compounds. Based on the limit of detection values, ONC-OA shows much better results for tri-nitro phenol compared to di and mono nitrophenol. To understand the quenching mechanism, a time-resolved photoluminescence analysis of the sensor with and without the addition of quenchers is performed. The effective lowering in fluorescence lifetime of the sensor after the addition of quenchers concludes that the quenching observed is majorly due to the Förster Resonance Energy Transfer (FRET) mechanism. The real-life application of ONC-OA was analyzed by external spiking of N-PhOHs in soil samples.

Adsorption of 4-Mercapto Pyridine with Gold Nanoparticles Embedded in the Langmuir-Blodgett Film Matrix of Stearic Acid: SERS, XPS Studies Aided by Born-Oppenheimer on the Fly Dynamics, Time-Resolved Wavelet Transform Theory, and DFT

This paper reports the adsorptive behavior of the 4-mercaptopyridine (4MPy) molecule soaked in gold nanoparticles (AuNPs) that remain embedded in the bilayer Langmuir-Blodgett (LB) film matrix of stearic acid (SA) for various soaking times (STs). The as-fabricated substrate proved to be an efficient SERS sensing platform that can sense the analyte 4MPy molecules at trace concentrations of ∼1.0 × 10^-9 M. The XPS study not only reveals the adsorption of 4Mpy molecules with AuNPs via a sulfur atom but also suggests partial degradation of the analyte molecule upon adsorption. This observation is further substantiated from the SERS spectral profile, which shows unusual broadening of the enhanced Raman bands of the molecule at higher STs. The experimental observations are supported by Born-Oppenheimer on-the-fly molecular dynamics (BO-OF-MD), time-resolved wavelet transform theory (WT), and the DFT calculations based on adcluster models. Selective enhancements of Raman bands in the SERS spectra further suggest the involvement of charge transfer (CT) interaction to the overall enhancements of Raman bands of the analyte molecule. The molecule → CT contribution has been estimated from electron density difference calculations and the corresponding CT distance; the amount of CT is also envisaged.

Sensitive and handy detection of pesticide residue on fruit surface based on single microsphere surface-enhanced Raman spectroscopy technique

HYPOTHESIS

Surface-enhanced Raman spectroscopy (SERS) has become an emerging and reliable tool for detecting pesticide residues due to its high sensitivity, fast testing speed and easy sample handling. SERS active substrates are the key to achieve efficient and sensitive detection. However, for the most widely used noble metal nanoparticles, there are problems of high noble metal nanoparticle usage and random aggregation. The micron-scale Raman spot is focused on multiple randomly aggregated nanoparticles during the test, resulting in poor reproducibility. Therefore, the development of micron-scale cost-effective SERS substrates with good reproducibility and simple detecting method is of great significance in practical detection.

EXPERIMENTS

Through deposition of silver nanoparticles (Ag-NPs) by chemical reduction on the surface of monodisperse sulfonated polystyrene (SPS) microspheres, micron-sized PS@Ag-NPs core-shell microspheres were prepared with excellent SERS activity. After that, two simple protocols (Method I and Method II) were explored for the determination of thiram on apple epidermis.

FINDINGS

Based on our developed strategy of the single microsphere SERS technique, we successfully fabricated uniform PS@Ag-NPs substrate with high SERS activity and excellent detection sensitivity. The single microsphere SERS technique possesses the capability of anti-dilutability and the utilization of ultra-low PS@Ag-NPs microsphere dosage, realizing qualitative and quantitative detection of thiram on apple with detection limits far below the standard stipulated by China and the European Union.

Wafer-scale Silver Nanodendrites with Homogeneous Distribution of Gold Nanoparticles for Biomolecules Detection

We report the fabrication and demonstrate the superior performance of robust, cost-effective, and biocompatible hierarchical Au nanoparticles (AuNPs) decorated Ag nanodendrites (AgNDs) on a Silicon platform for the trace-level detection of antibiotics (penicillin, kanamycin, and ampicillin) and DNA bases (adenine, cytosine). The hot-spot density dependence studies were explored by varying the AuNPs deposition time. These substrates’ potential and versatility were explored further through the detection of crystal violet, ammonium nitrate, and thiram. The calculated limits of detection for CV, adenine, cytosine, penicillin G, kanamycin, ampicillin, AN, and thiram were 348 pM, 2, 28, 2, 56, 4, 5, and 2 nM, respectively. The analytical enhancement factors were estimated to be ∼10⁷ for CV, ∼10⁶ for the biomolecules, ∼10⁶ for the explosive molecule, and ∼10⁶ for thiram. Furthermore, the stability of these substrates at different time intervals is being reported here with surface-enhanced Raman spectroscopy/scattering (SERS) data obtained over 120 days.

•

Wafer-scale surface-enhanced Raman spectroscopy/scattering (SERS) substrate of Ag nanodendrites decorated with Au nanoparticles prepared

•

Trace level detection of antibiotics achieved

•

Versatility of these substrates demonstrated by detecting explosive, dye molecules

•

Typical enhancement factors achieved were 10⁵–10⁷

Picosecond Laser-Ablated Nanoparticles Loaded Filter Paper for SERS-Based Trace Detection of Thiram, 1,3,5-Trinitroperhydro-1,3,5-triazine (RDX), and Nile Blue

Recently, filter paper (FP)-based surface-enhanced Raman scattering (SERS) substrates have stimulated significant attention owing to their promising advantages such as being low-cost, easy to handle, and practically suitable for real-field applications in comparison to the solid-based substrates. Herein, a simple and versatile approach of laser-ablation in liquid for the fabrication of silver (Ag)-gold (Au) alloy nanoparticles (NPs). Next, the optimization of flexible base substrate (sandpaper, printing paper, and FP) and the FP the soaking time (5−60 min) was studied. Further, the optimized FP with 30 min-soaked SERS sensors were exploited to detect minuscule concentrations of pesticide (thiram-50 nM), dye (Nile blue-5 nM), and an explosive (RDX-1,3,5-Trinitroperhydro-1,3,5-triazine-100 nM) molecule. Interestingly, a prominent SERS effect was observed from the Au NPs exhibiting satisfactory reproducibility in the SERS signals over ~1 cm2 area for all of the molecules inspected with enhancement factors of ~105 and relative standard deviation values of <15%. Furthermore, traces of pesticide residues on the surface of a banana and RDX on the glass slide were swabbed with the optimized FP substrate and successfully recorded the SERS spectra using a portable Raman spectrometer. This signifies the great potential application of such low-cost, flexible substrates in the future real-life fields.

Picosecond Bessel Beam Fabricated Pure, Gold-Coated Silver Nanostructures for Trace-Level Sensing of Multiple Explosives and Hazardous Molecules

A zeroth-order, non-diffracting Bessel beam, generated by picosecond laser pulses (1064 nm, 10 Hz, 30 ps) through an axicon, was utilized to perform pulse energy-dependent (12 mJ, 16 mJ, 20 mJ, 24 mJ) laser ablation of silver (Ag) substrates in air. The fabrication resulted in finger-like Ag nanostructures (NSs) in the sub-200 nm domain and obtained structures were characterized using the FESEM and AFM techniques. Subsequently, we employed those Ag NSs in surface-enhanced Raman spectroscopy (SERS) studies achieving promising sensing results towards trace-level detection of six different hazardous materials (explosive molecules of picric acid (PA) and ammonium nitrate (AN), a pesticide thiram (TH) and the dye molecules of Methylene Blue (MB), Malachite Green (MG), and Nile Blue (NB)) along with a biomolecule (hen egg white lysozyme (HEWL)). The remarkably superior plasmonic behaviour exhibited by the AgNS corresponding to 16 mJ pulse ablation energy was further explored. To accomplish a real-time application-oriented understanding, time-dependent studies were performed utilizing the AgNS prepared with 16 mJ and TH molecule by collecting the SERS data periodically for up to 120 days. The coated AgNSs were prepared with optimized gold (Au) deposition, accomplishing a much lower trace detection in the case of thiram (~50 pM compared to ~50 nM achieved prior to the coating) as well as superior EF up to ~10⁸ (~10⁶ before Au coating). Additionally, these substrates have demonstrated superior stability compared to those obtained before Au coating.

Magnetic nanoparticles and magnetic particle spectroscopy-based bioassays: a 15 year recap

Magnetic nanoparticles (MNPs) have unique physical and chemical properties, such as high surface area to volume ratio and size-related magnetism, which are completely different from their bulk materials. Benefiting from the facile synthesis and chemical modification strategies, MNPs have been widely studied for applications in nanomedicine. Herein, we firstly summarized the designs of MNPs from the perspectives of materials and physicochemical properties tailored for biomedical applications. Magnetic particle spectroscopy (MPS), first reported in 2006, has flourished as an independent platform for many biological and biomedical applications. It has been extensively reported as a versatile platform for a variety of bioassays along with the artificially designed MNPs, where the MNPs serve as magnetic nanoprobes to specifically probe target analytes from fluid samples. In this review, the mechanisms and theories of different MPS platforms realizing volumetric- and surface-based bioassays are discussed. Some representative works of MPS platforms for applications such as disease diagnosis, food safety and plant pathology monitoring, drug screening, thrombus maturity assessments are reviewed. At the end of this review, we commented on the rapid growth and booming of MPS-based bioassays in its first 15 years. We also prospected opportunities and challenges that portable MPS devices face in the rapidly growing demand for fast, inexpensive, and easy-to-use biometric techniques.

Machine learning for rapid quantification of trace analyte molecules using SERS and flexible plasmonic paper substrates

Given the intrinsic nature of low reproducibility and signal blinking in the surface enhanced Raman scattering (SERS) technique, especially while detecting trace/ultra-trace amounts, it remains a major challenge to quantify the analyte under study. Here we present a simple and economically viable, flexible hydrophobic plasmonic filter paper-based SERS substrate for the quantification of two trace analytes [crystal violet (CV) and picric acid (PA)] using machine learning techniques and SERS data. The wettability of the substrate was modified with an easy and low-cost technique of coating it with silicone oil. Gold nanoparticles were synthesized using a femtosecond laser ablation in water technique. The prepared nanoparticles were characterized using UV, TEM, and SEM techniques and subsequently loaded onto filter papers before using them for SERS studies. We have considered the SERS intensities of the analytes at different concentrations with over 900 spectra to train the model. Principal component analysis (PCA) was used to reduce the dimensionality and, hence, the complexity of the model. Furthermore, support vector regression was used to quantify the analyte molecules and we achieved an R² error of 0.9629 for CV and 0.9472 for PA. In conjunction with a portable Raman spectrometer and a computation time of less than <10 s, we believe that this is an affordable and rapid method for quantification of analytes using the SERS technique.

Face-to-Face Assembly of Ag Nanoplates on Filter Papers for Pesticide Detection by Surface-Enhanced Raman Spectroscopy

Surface-enhanced Raman spectroscopy (SERS) technology has been regarded as a most efficient and sensitive strategy for the detection of pollutants at ultra-low concentrations. Fabrication of SERS substrates is of key importance in obtaining the homogeneous and sensitive SERS signals. Cellulose filter papers loaded with plasmonic metal NPs are well known as cost-effective and efficient paper-based SERS substrates. In this manuscript, face-to-face assembly of silver nanoplates via solvent-evaporation strategies on the cellulose filter papers has been developed for the SERS substrates. Furthermore, these developed paper-based SERS substrates are utilized for the ultra-sensitive detection of the rhodamine 6G dye and thiram pesticides. Our theoretical studies reveal the creation of high density hotspots, with a huge localized and enhanced electromagnetic field, near the corners of the assembled structures, which justifies the ultrasensitive SERS signal in the fabricated paper-based SERS platform. This work provides an excellent paper-based SERS substrate for practical applications, and one which can also be beneficial to human health and environmental safety.

The finite-difference time-domain (FDTD) guided preparation of Ag nanostructures on Ti substrate for sensitive SERS detection of small molecules

Surface-enhanced Raman Scattering (SERS) has become a powerful analytical technique for highly sensitive detection of target molecules. Its performance, however, is heavily dependent on the substrates. Relatively low sensitivity for small molecules and poor reproducibility in quantitative analysis are often encountered in most of nanoparticle modified SERS substrate. The present work starts by theoretical investigation of the electromagnetic field enhancement by nanomaterials of coinage metals with different sizes. The finite-difference time-domain (FDTD) simulation results revealed that the Ag NPs with the size around 100 nm exhibit the strongest SERS effect and the 'Ag-Ag' gaps have shown higher electromagnetic field enhancement than that of the 'Ag-Ti' gap. Subsequently, a multilayered Ag nanoparticles SERS substrate (or other coinage metals) was prepared by a two-step electroless deposition of Ag on Ti substrate. This was achieved by in situ reduction of Ag precursor to subsequently form a Ag nanoflake (Ag NF) layer and a Ag nanoparticle (Ag NPs) layer on the Ti base (Ti/AgNFs/AgNPs). The as-prepared SERS substrate showed a substantially enhanced SERS effect for small molecule detection and detection limit as low as 1.0 × 10^-17 M for picric acid (PA), 1.0 × 10^-14 M for p-nitrotoluene (PNT) and 1.0 × 10^-6 M for uric acid (UA) were obtained respectively. The facile method developed in this work should be widely applicable for in-situ preparation of other SERs substrates.

Plasmonic nanosensors for point-of-care biomarker detection

Advancement of materials along with their fascinating properties play increasingly important role in facilitating the rapid progress in medicine. An excellent example is the recent development of biosensors based on nanomaterials that induce surface plasmon effect for screening biomarkers of various diseases ranging from cancer to Covid-19. The recent global pandemic re-confirmed the trend of real-time diagnosis in public health to be in point-of-care (POC) settings that can screen interested biomarkers at home, or literally anywhere else, at any time. Plasmonic biosensors, thanks to its versatile designs and extraordinary sensitivities, can be scaled into small and portable devices for POC diagnostic tools. In the meantime, efforts are being made to speed up, simplify and lower the cost of the signal readout process including converting the conventional heavy laboratory instruments into lightweight handheld devices. This article reviews the recent progress on the design of plasmonic nanomaterial-based biosensors for biomarker detection with a perspective of POC applications. After briefly introducing the plasmonic detection working mechanisms and devices, the selected highlights in the field focusing on the technology's design including nanomaterials development, structure assembly, and target applications are presented and analyzed. In parallel, discussions on the sensor's current or potential applicability in POC diagnosis are provided. Finally, challenges and opportunities in plasmonic biosensor for biomarker detection, such as the current Covid-19 pandemic and its testing using plasmonic biosensor and incorporation of machine learning algorithms are discussed.

Microplasma synthesized gold nanoparticles for surface enhanced Raman spectroscopic detection of methylene blue

Surface enhanced Raman scattering (SERS) is a powerful and sensitive spectroscopic technique that allows for rapid detection of trace-level chemical species in a non-invasive and non-destructive manner.

Development of Au NPs-decorated filter paper as a SERS platform for the detection of benzidine

In this paper, a simple and cost-efficient strategy was used to construct a uniform Au NPs distribution on the surface of flexible filter paper for the detection of benzidine. Taking full advantage of the adsorption properties of filter paper, small gold nanoparticles were adsorbed onto its surface as gold seeds, and subsequently grown by electroless plating to form a highly uniform distribution of Au NPs substrates. By changing the electroless plating time, an optimal substrate was obtained. The as-prepared substrate exhibited satisfactory sensitivity with a low detection limit of 10⁻¹³ M for 4-ATP, and good reproducibility and homogeneity. Furthermore, the as-prepared substrates were successfully used for the detection of benzidine in environmental water, with a minimum detection concentration as low as 0.1 ppm and recoveries in the range of 92.4 to ∼108.5%. This study indicated that filter paper-based SERS substrates have great potential value in the detection of environmental organic pollutants.

A simple and cost-efficient strategy was used to construct a uniform Au NPs decorated filter paper SERS substrates for the detection of benzidine.

Trace level detection of explosives and pesticides using robust, low-cost, free-standing silver nanoparticles decorated porous silicon

We report results from our extensive studies on the fabrication of ultra-thin, flexible, and cost-effective Ag nanoparticle (NP) coated free-standing porous silicon (FS-pSi) for superior molecular sensing. The FS-pSi has been prepared by adopting a simple wet-etching method. The deposition time of AgNO₃ has been increased to improve the number of hot-spot regions, thereby the sensing abilities are improved efficiently. FESEM images illustrated the morphology of uniformly distributed AgNPs on the pSi surface. Initially, a dye molecule [methylene blue (MB)] was used as a probe to evaluate the sensing capabilities of the substrate using the surface-enhanced Raman scattering (SERS) technique. The detection was later extended towards the sensing of two important explosive molecules [ammonium nitrate (AN), picric acid (PA)], and a pesticide molecule (thiram) clearly demonstrating the versatility of the investigated substrates. The sensitivity was confirmed by estimating the analytical enhancement factor (AEF), which was ∼10⁷ for MB and ∼10⁴ for explosives and pesticides. We have also evaluated the limit of detection (LOD) values in each case, which were found to be 50 nM, 1 µM, 2 µM, and 1 µM, respectively, for MB, PA, AN, and thiram. Undeniably, our detailed SERS results established excellent reproducibility with a low RSD (relative standard deviation). Furthermore, we also demonstrate the reasonable stability of AgNPs decorated pSi by inspecting and studying their SERS performance over a period of 90 days. The overall cost of these substrates is attractive for practical applications on account of the above-mentioned superior qualities.

[Applications of microfluidic paper-based chips in environmental analysis and detection]

近年来,微流控纸芯片由于低成本、便携化、检测快等优点,在需要快速检测的环境分析领域中展现出了巨大的应用前景。该综述从微流控纸芯片在环境分析中的应用角度,总结归纳了微流控纸芯片在环境分析中的最新研究进展,并展望了其在未来的发展趋势与挑战。论文内容引用150余篇源于科学引文索引(SCI)与中文核心期刊中的相关论文。该综述包括微流控纸芯片在环境检测中的优势与制造方法介绍;电化学法、荧光法、比色法、表面增强拉曼法、集成传感法等基于纸芯片的先进分析方法介绍;根据环境分析目标物种类,如重金属离子、营养盐、农药、微生物、抗生素以及其他污染物等,对纸芯片的最新应用现状进行了举例评述;基于微流控纸芯片的环境分析研究的未来发展趋势和前景展望。通过综述近期相关研究,表明微流控纸芯片从提出至今虽然只有十几年的发展历程,但其在环境分析研究中的发展却十分迅速。微流控纸芯片可以根据不同的环境条件和检测要求灵活选择制作与分析方法,实现最佳的检测效果。但是微流控纸芯片也面临一些挑战,如纸张机械强度不足、流体控制程度不佳等问题。这些问题指出了微流控纸芯片在环境检测领域的发展趋势,相信随着不断深入的研究,纸芯片将会在未来的环境分析中发挥更大作用。

Facile synthesis of silver/gold alloy nanoparticles for ultra-sensitive rhodamine B detection

The synthesis of Ag/Au nanoparticles (NPs) in a controlled manner has been a challenge for a long time. The aim of this report is to present a systematic study on the fabrication, characterization of Ag/Au alloy NP-based surface-enhanced Raman spectroscopy (SERS) substrates. Silver (Ag) and gold (Au) colloidal NPs were prepared by chemical reduction route of the corresponding metal salts by trisodium citrate (TSC). Ag/Au alloy nanoparticles with varying molar fractions are prepared in aqueous solution by the simultaneous reduction of AgNO3 and HAuCl4 by TSC. The composition of Ag and Au in the alloy samples was controlled by tuning the molar ratio of Ag+/Au3+ in the mixture solution. The morphologies of the different products were characterized by TEM, and the size of obtained samples was in the range of 40 to 60 nm. The resulting samples were denoted as AgNPs, AuNPs, Ag3Au, AgAu, and AgAu3 NPs. In order to compare the optical property of the Ag/Au alloy and Ag/Au mixture, we mixed the pure Ag and Au NPs with different ratios to obtain the aggregated nanoparticles. Ag/Au alloy NPs were demonstrated as an ultrasensitive SERS substrate for the detection of rhodamine B (RhB) molecules. The concentration of RhB ranged from 10-11 to 10-5 M. The effect of the Au content on the optical and SERS properties of the Ag/Au alloys was studied. The obtained results show that the Au content in the Ag/Au alloys play an important role in the physical properties of Ag/Au alloy NPs. The SERS spectra of RhB from the as-prepared Ag/Au alloy NP substrates indicated the superior enhancement with high reproducibility and sensitivity compared to those of Ag or Au samples. Interestingly, the highest SERS activity was achieved for the Ag3Au sample with an enhancement factor larger than 1010 for 10-11 M RhB and a limit of detection (LOD) at 10-11 M, as well as good long-term stability after storage for 1 year. As far as we know, this is the highest sensitivity record of RhB by SERS detection. Furthermore, the composition-dependent SERS activity was explained in detail. These advantages demonstrated the potential for growing Ag/Au alloy NP-based SERS substrates in food safety and bioanalysis.

Application of Plasma-Printed Paper-Based SERS Substrate for Cocaine Detection

Surface-enhanced Raman spectroscopy (SERS) technology is an attractive method for the prompt and accurate on-site screening of illicit drugs. As portable Raman systems are available for on-site screening, the readiness of SERS technology for sensing applications is predominantly dependent on the accuracy, stability and cost-effectiveness of the SERS strip. An atmospheric-pressure plasma-assisted chemical deposition process that can deposit an even distribution of nanogold particles in a one-step process has been developed. The process was used to print a nanogold film on a paper-based substrate using a HAuCl₄ solution precursor. X-ray photoelectron spectroscopy (XPS) analysis demonstrates that the gold has been fully reduced and that subsequent plasma post-treatment decreases the carbon content of the film. Results for cocaine detection using this substrate were compared with two commercial SERS substrates, one based on nanogold on paper and the currently available best commercial SERS substrate based on an Ag pillar structure. A larger number of bands associated with cocaine was detected using the plasma-printed substrate than the commercial substrates across a range of cocaine concentrations from 1 to 5000 ng/mL. A detection limit as low as 1 ng/mL cocaine with high spatial uniformity was demonstrated with the plasma-printed substrate. It is shown that the plasma-printed substrate can be produced at a much lower cost than the price of the commercial substrate.

High signal collection efficiency in a 3D SERS chip using a micro-reflector

To improve the sensitivity of surface-enhanced Raman spectroscopy (SERS) detection, we propose a three-dimensional (3D) SERS chip based on an inverted pyramid micro-reflector (IPMR) that converges Raman scattering light signals to improve the signal collection efficiency. The influence of the geometric parameters of the inverted pyramid structure on the Raman signal collection efficiency was analyzed by simulation for the determination of the optimal design parameters. The inverted pyramid through-hole structure was prepared on the silicon wafer through an anisotropic wet etching process, followed by the sputtering of a gold film to form the IPMR. The 3D SERS chip was constructed by bonding the IPMR and the active substrate that assembled with silver nanoparticles. Using Rhodamine 6G molecules, the Raman intensity measured with the 3D SERS chip was threefold greater than that of the silicon-based SERS substrate under the same test conditions. These experimental results show that the 3D SERS chip can significantly improve the SERS signal intensity. Its 3D structure is convenient for integration with microfluidic devices and has great potential in biochemical detection applications.

Affinity Immobilization of Semiconductor Quantum Dots and Metal Nanoparticles on Cellulose Paper Substrates

Colloidal semiconductor quantum dots (QDs), metal nanoparticles, and cellulose paper are materials with numerous applications in bioanalysis and beyond. The functional properties of QDs and metal NPs are substantially different than those of cellulose, such that their integration with cellulose paper is potentially enabling for many applications. Here, we characterize and evaluate multiple chemistries that modify cellulose paper substrates for the affinity-based immobilization of QDs, gold nanoparticles (Au NPs), and platinum nanoparticles (Pt NPs). These chemistries include grafting of cellulose fibers with imidazole and dithiol groups, as well as the aminosilanization of cellulose fibers (both with and without subsequent grafting with dithiol groups). Cellulose modifications and nanoparticle immobilization are characterized by multiple techniques, including, but not limited to, X-ray photoelectron spectroscopy, scanning electron microscopy, and optical imaging, extinction, and fluorescence measurements. We demonstrate the on-paper immobilization of color-tuned mixtures of QDs, on-paper patterning of QDs by microcontact printing, and post-immobilization enhancement of energy transfer and model assays of protease activity. The robustness of QD photoluminescence is also evaluated between immobilization chemistries. Paper-immobilized Au NPs and Pt NPs are evaluated as potential substrates for SERS and as supported catalysts for a model decolorization reaction. Our cumulative results indicate that there may not be a one-size-fits-all immobilization chemistry. Instead, the immobilization chemistry should be tailored and optimized for the downstream application.

The fabrication of paper separation channel based SERS substrate and its recyclable separation and detection of pesticides

In this article, a modified paper separation channel SERS substrate was fabricated by a pen writing method for the simultaneous separation and detection of thiuram and dimethoate. The hydrophilic channel was fabricated with both sides of hydrophobic barrier by the Alkylketene dimer (AKD) modified paper substrate, of which the flow dynamic was well conformed to the Lucas-Washburn model and could be used to separate pesticides effectively. As modified by Ag nanoparticles (AgNPs) and ZnO nanoparticles (ZnONPs), the hydrophilic channel exhibited high recyclable SERS detection activity and stability. The separation and detection performance with different target proportion, channel width and sample volume were studied in detail, which have significant influence on the diffusion process. Additionally, the Raman detects intensity on the substrate also showed linear relationship from 100 to 1000 μg/L. The calculated limit of detects (LODs) under optimal experimental conditions were 54.57 and 19.16 μg/L for dimethoate and thiuram, respectively. Due to the loading of ZnONPs, the substrate could be used repeatably with good stability. The convenient preparation, effective separation and repeatability make this paper based separation channel SERS substrate have great potential application on the fast separation and simultaneous detection of various pesticides in complex field.

The ionization process of chemical warfare agent simulants in low temperature plasma ionization

The application of low-temperature plasma ionization technology in the chemical warfare agent detection was mostly focused on the research of rapid detection methods. Limited studies are available on the ionization process of chemical warfare agents in low temperature plasma. Through the intensity of protonated molecules of dimethyl methylphosphonate (DMMP) in different solvents including methanol, deuterated methanol (methanol-D₄), pure water, and deuterium oxide (water-D₂), it was concluded that the water molecule in the air provides the hydrogen ion (H⁺) needed for ionization. The product ion spectra and the collision-induced dissociation processes of protonated molecules of nerve agent simulants, including DMMP, diethyl methanephosphonate (DEMP), trimethyl phosphate (TMP), triethyl phosphate (TEP), tripropyl phosphate (TPP), and tributyl phosphate (TBP) were analyzed. Results revealed that H⁺ mostly combined with phosphorus oxygen double bond (P = O) in the low-temperature plasma ionization. By analyzing the peak intensity distribution of product ions of protonated molecules, the presence of proton and charge migration in the low temperature plasma ionization and collision-induced dissociation were researched. This study could provide technical guidance for the rapid and accurate detection of chemical warfare agents through low temperature plasma ionization-mass spectrometry.

Recent Developments in the Field of Explosive Trace Detection

Explosive trace detection (ETD) technologies play a vital role in maintaining national security. ETD remains an active research area with many analytical techniques in operational use. This review details the latest advances in animal olfactory, ion mobility spectrometry (IMS), and Raman and colorimetric detection methods. Developments in optical, biological, electrochemical, mass, and thermal sensors are also covered in addition to the use of nanomaterials technology. Commercially available systems are presented as examples of current detection capabilities and as benchmarks for improvement. Attention is also drawn to recent collaborative projects involving government, academia, and industry to highlight the emergence of multimodal screening approaches and applications. The objective of the review is to provide a comprehensive overview of ETD by highlighting challenges in ETD and providing an understanding of the principles, advantages, and limitations of each technology and relating this to current systems.

Bicontinuous microemulsion as confined reaction media for the synthesis of plasmonic silver self-assembled hierarchical superstructures

Plasmonic superstructures may concentrate hot spots both on the external surface and within the inner gaps of the assembly. However, these materials are usually obtained by two-steps procedures from synthesis of plasmonic nanoparticles to their 3D assembly. The interconnected nano-network of water and oil channels in a bicontinuous microemulsion (BμE) may act as a preorganized reaction system giving reticulated materials. In this work, a silver hierarchical superstructure (HSS-AgCt) was obtained in the water channels of a BµE in a one-pot procedure. The characterization of the morphology and crystalline structure revealed that this superstructure is composed of silver nanoparticles embedded in polymeric silver citrate forming a 3D mesh of interconnected fibers with mean width of 30 nm. The aging of HSS-AgCt in the BμE allowed the degradation of the citrate fibers giving rise to interconnected spherical silver nanoparticles (HSS-Ag) of 8 nm as measured from TEM images. Rhodamine 6-G was detected by SERS up to 10-12 M with an analytical enhancement factor of 109 for both materials using a 633 nm laser operating at 0.85 mW (5% of the nominal power). These results introduce a novel route to obtain highly sensitive SERS substrates in one-pot procedures by using BμE as a nanoreactor and template.

Interpol review of detection and characterization of explosives and explosives residues 2016-2019

This review paper covers the forensic-relevant literature for the analysis and detection of explosives and explosives residues from 2016-2019 as a part of the 19th Interpol International Forensic Science Managers Symposium. The review papers are also available at the Interpol website at: https://www.interpol.int/Resources/Documents#Publications.

Surface enhanced Raman scattering substrate for the detection of explosives: Construction strategy and dimensional effect

Surface-enhanced Raman spectroscopy (SERS) technology has been reported to be able to quickly and non-destructively identify target analytes. SERS substrate with high sensitivity and selectivity gave SERS technology a broad application prospect. This contribution aims to provide a detailed and systematic review of the current state of research on SERS-based explosive sensors, with particular attention to current research advances. This review mainly focuses on the strategies for improving SERS performance and the SERS substrates with different dimensions including zero-dimensional (0D) nanocolloids, one-dimensional (1D) nanowires and nanorods, two-dimensional (2D) arrays, and three-dimensional (3D) networks. The effects of elemental composition, the shape and size of metal nanoparticles, hot-spot structure and surface modification on the performance of explosive detection are also reviewed. In addition, the future development tendency and application of SERS-based explosive sensors are prospected.

Robust and cost-effective silver dendritic nanostructures for SERS-based trace detection of RDX and ammonium nitrate

We report the fabrication and performance evaluation of cost-effective, reproducible silver nanodendrite (AgND) substrates, possessing high-density trunks and branches, achieved by a simple electroless etching process and subsequently utilized them for the trace detection of 1,3,5-trinitroperhydro-1,3,5-triazine (Research Development Explosive, RDX) and Ammonium Nitrate (AN). The intricate structural features in AgNDs offer high-density hotspots for effective molecular detection based on the surface enhanced Raman scattering (SERS) technique. The active SERS-substrate was initially tested with standard Rhodamine 6G (R6G) molecules at 1 nM concentration, which established an effective enhancement factor (EF) of ∼10⁸. The AgNDs were subsequently utilized in the detection of the explosives RDX and AN, down to concentrations of 1 μM. The typical EF achieved in the case of RDX and AN was ∼10⁴. The sensitivity of 1 μM R6G was further enhanced by two-fold through the deposition of Au nanoparticles on the AgNDs. The reproducibility of the low-cost substrate was also demonstrated, with a ∼9% RSD value in the measurements.

We report the fabrication and performance evaluation of cost-effective, reproducible silver nanodendrite (AgND) substrates, possessing high-density trunks and branches, achieved by a simple electroless etching and used for the trace detection of RDX and Ammonium Nitrate.

Graphene oxide/gold nanorod plasmonic paper – a simple and cost-effective SERS substrate for anticancer drug analysis

A simple and cost-effective plasmonic paper as a SERS substrate based on a combination of graphene oxide (GO) and gold nanorods (AuNRs).

SERS based detection of multiple analytes from dye/explosive mixtures using picosecond laser fabricated gold nanoparticles and nanostructures

Surface enhanced Raman spectroscopy (SERS) is a cutting edge analytical tool for trace analyte detection due to its highly sensitive, non-destructive and fingerprinting capability. Herein, we report the detection of multiple analytes from various mixtures using gold nanoparticles (NPs) and nanostructures (NSs) as SERS platforms. NPs and NSs were achieved through the simple approach of laser ablation in liquids (LAL) and their morphological studies were conducted with a UV-Visible absorption spectrometer, a high resolution transmission electron microscope (HRTEM) and a field emission scanning electron microscope (FESEM). The fabricated NPs/NSs allowed the sensitive and selective detection of different mixed compounds containing (i) rhodamine 6G (Rh6G) and methylene blue (MB), (ii) crystal violet (CV) and malachite green (MG), (iii) picric acid (explosive) and MB (dye), (iv) picric acid and 3-nitro-1,2,4- triazol-5-one (explosive, NTO) and (v) picric acid and 2,4-dinitrotoluene (explosive, DNT) using a portable Raman spectrometer. Thus, the obtained results demonstrate the capability of fabricated SERS substrates in identifying explosives and dyes from various mixtures. This could pave a new way for simultaneous detection of multiple analytes in real field applications.

Explosives sensing using Ag–Cu alloy nanoparticles synthesized by femtosecond laser ablation and irradiation

Herein we demonstrate the synthesis of Ag–Cu alloy NPs through a consecutive two-step process; laser ablation followed by laser irradiation. Initially, pure Ag and Cu NPs were produced individually using the laser ablation in liquid technique (with ∼50 femtosecond pulses at 800 nm) which was followed by laser irradiation of the mixed Ag and Cu NPs in equal volume. These Ag, Cu, and Ag–Cu NPs were characterised by UV-visible absorption, HRTEM and XRD techniques. The alloy formation was confirmed by the presence of a single surface plasmon resonance peak in absorption spectra and elemental mapping using FESEM techniques. Furthermore, the results from surface enhanced Raman scattering (SERS) studies performed for the methylene blue (MB) molecule suggested that Ag–Cu alloy NPs demonstrate a higher enhancement factor (EF) compared to pure Ag/Cu NPs. Additionally, SERS studies of Ag–Cu alloy NPs were implemented for the detection of explosive molecules such as picric acid (PA – 5 μM), ammonium nitrate (AN – 5 μM) and the dye molecule methylene blue (MB – 5 nM). These alloy NPs exhibited superiority in the detection of various analyte molecules with good reproducibility and high sensitivity with EFs in the range of 10⁴ to 10⁷.

Herein we demonstrate the synthesis of Ag–Cu alloy NPs through a consecutive two-step process; laser ablation followed by laser irradiation.

Enhanced catalytic and SERS performance of shape/size controlled anisotropic gold nanostructures

Au nanostars of different sizes and shapes prepared using a simple method and their applications.

Femtosecond Laser-Induced, Nanoparticle-Embedded Periodic Surface Structures on Crystalline Silicon for Reproducible and Multi-utility SERS Platforms

Fabrication of reproducible and versatile surface-enhanced Raman scattering (SERS) substrates is crucial for real-time applications such as explosive detection for human safety and biological imaging for cancer diagnosis. However, it still remains a challenging task, even after several methodologies were developed by various research groups, primarily due to (a) a lack of consistency in detection of a variety of molecules (b) cost-effectiveness of the SERS substrates prepared, and (c) byzantine preparation procedures, etc. Herein, we establish a procedure for preparing reproducible SERS-active substrates comprised of laser-induced nanoparticle-embedded periodic surface structures (LINEPSS) and metallization of silicon (Si) LINEPSS. LINEPSS were fabricated using the technique of femtosecond laser ablation of Si in acetone. The versatile SERS-active substrates were then achieved by two ways, including the drop casting of silver (Ag)/gold (Au) nanoparticles (NPs) on Si LINEPSS and Ag plating on the Si LINEPSS structures. By controlling the LINEPSS grating periodicity, the effect of plasmonic nanoparticles/plasmonic plating on the Si NPs embedded periodic surface structures enormously improved the SPR strength, resulting in the consistent and superior Raman enhancements. The reproducible SERS signals were achieved by detecting the molecules of Methylene Blue (MB), 2,4-dinitrotoluene (DNT), and 5-amino-3-nitro-l,2,4-triazole (ANTA). The SERS signal strength is determined by the grating periodicity, which, in turn, is determined by the input laser fluence. The SERS-active platform with grating periodicity of 130 ± 10 nm and 150 ± 5 nm exhibited strong Raman enhancements of ∼10⁸ for MB and ∼10⁷ for ANTA molecules, respectively, and these platforms are demonstrated to be capable, even for multiple usages.