Synthesis of LaFeO3/Ag2CO3 Nanocomposites for Photocatalytic Degradation of Rhodamine B and p-Chlorophenol under Natural Sunlight

La-Fe-O Perovskite Based Gas Sensors: Recent Advances and Future Challenges

Interest in the importance of gas sensing devices has increased significantly due to their critical function in monitoring the environment and controlling pollution, resulting in an increased market demand. The present review explores perovskite La-Fe-O based gas sensors with a special focus on LaFeO3 and evaluates their sensitivity to a diverse range of practical target gases that need to be monitored. An analysis has been conducted to assess different routes not only of synthesizing LaFeO3 material but also of characterization with the targeted use for their gas sensing abilities. Additionally, a comprehensive analysis has been performed to explore the effect of introducing other elements through doping. In view of the LaFeO3 sensing performance, more common gases like acetone, ethanol, methanol, formaldehyde, NO x , and CO2 have been targeted. In addition, a discussion on uncommon gases such as CO, SO2, TEA, C2H5, C6H6, and others is also made to give a complete picture of LaFeO3-based gas sensors. The summary and conclusion section of the study addresses the primary obstacles in the synthesis process, the variables that restrict the sensing capabilities of LaFeO3, and its commercial fulfillment.

Preparation of visible-light active MOFs-Perovskites (ZIF-67/LaFeO3) nanocatalysts for exceptional CO2 conversion, organic pollutants and antibiotics degradation

Modern industries rapid expansion has heightened energy needs and accelerated fossil fuel depletion, contributing to global warming. Additionally, organic pollutants present substantial risks to aquatic ecosystems due to their stability, insolubility, and non-biodegradability. Scientists are currently researching high-performance materials to address these issues. LaFeO3 nanosheets (LFO-NS) were synthesized in this study using a solvothermal method with polyvinylpyrrolidone (PVP) as a soft template. The LFO-NS demonstrate superior performance, large surface area and charge separation than that of LaFeO3 nanoparticles (LFO-NP). The LFO-NS performance is further upgraded by incorporating ZIF-67. Our results confirmed the ZIF-67/LFO-NS nanocomposite have superior performances than pure LFO-NP and ZIF-67. The integration of ZIF-67 has enhanced the charge separation and promote the surface area of LFO-NSwhich was confirmed by various characterization techniques including TEM, HRTEM, DRS, EDX, XRD, FS, XPS, FT-IR, BET, PL, and RAMAN. The 5ZIF-67/LFO-NS sample showed significant activities for CO2 conversion, malachite green degradation, and antibiotics (cefazolin, oxacillin, and vancomycin) degradation. Furthermore, stability tests have confirmed that our optimal sample very active and stable. Furthermore, based on scavenger experiments and the photocatalytic degradation pathways, it has been established that H+ and •O2- are vital in the decomposition of MG and antibiotics. Our research work will open new gateways to prepare MOFs-Perovskites nanocatalysts for exceptional CO2 conversion, organic pollutants and antibiotics degradation.

Synthesis and characterization of rGO/Fe0/Fe3O4/TiO2 nanocomposite and application of photocatalytic process in the decomposition of penicillin G from aqueous

In this study, we synthesized rGO/Fe⁰/Fe₃O₄/TiO₂ nanocomposite according to Hummer's, and straightforward sol-gel method. The FESEM, EDX, TEM, FT-IR, XRD, BET, UV spectra, and VSM analysis were applied to determine the catalyst properties. Optimization of influence parameters on photocatalytic process performance to penicillin G degradation in aqueous media. pH (4-8), nanocomposite dose (10-20 mg/L), reaction time (30-60 min), and penicillin G concentration (50-100 mg/L) were optimized via central composite design. In the optimum condition of PCP, supplementary studies were done. As a result of the analysis, the nanocomposite was well synthesized and displayed superior photocatalytic properties for degrading organic pollutants. In addition to being magnetically separable, the synthesized rGO/Fe⁰/Fe₃O₄/TiO₂ nanocomposite exhibits high recyclability up to 5 times. The quadratic model of optimization is based on the adjusted R²(0.99), and predicated R²(0.97) suggested. According to the analysis of variance test, the model was significant (F-Value = 162.95, P-Value = 0.0001). Photocatalytic process is most efficiently decomposed at pH = 6.5, catalyst dose = 18.5 mg/L, reaction time = 59.1 min, and penicillin G concentration = 52 mg/L (efficiency = 96%). The chemical oxygen demand and total organic carbon decrease were 78, and 65%. The photolysis and adsorption mechanism as a single mechanism had lower performance in penicillin G degradation. Benzocaine had the greatest effect on reducing the efficiency of the process as a radical scavenger. The °OH, h^+, and O₂^●- were the main reactive oxidant species in penicillin G removal. Phenoxyacetaldehyde, Acetanilide, Diacetamate, Phenylalanylglycine, N-Acetyl-l-phenylalanine, Diformyldapsone, and Succisulfone were the main intermediates in penicillin G degradation. The results indicated the photocatalytic process with rGO/Fe⁰/Fe₃O₄/TiO₂ nanocomposite on a laboratory scale has good efficiency in removing penicillin G antibiotic. The application of real media requires further studies.

ZnO/Graphene Oxide on Halloysite Nanotubes as a Superabsorbent Nanocomposite Photocatalyst for the Degradation of Organic Dyes

Using renewable photocatalysts for pollutant degradation represents a promising approach to addressing environmental water challenges by harnessing solar energy without additional energy consumption. However, for the practical use of photocatalysts, it is necessary to improve catalyst efficiency, considering cost and biocompatibility. In this study, we developed a new superabsorbent photocatalyst for the degradation of organic dyes in water. Our photocatalyst comprises halloysite nanotubes (HNTs) with a large outer diameter and Si-O and Al-O groups on the outer and inner surfaces, respectively; graphene oxide (GO) possessing numerous sp2 bonds and light-conductive properties; and ZnO, which can degrade organic molecules via a photon source. By exploiting the superabsorbent properties of GOs for organic dyes and stabilizing ZnO nanoparticles on HNTs to inhibit aggregation, our photocatalysts demonstrated significantly improved degradability compared to ZnO nanoparticles alone and combinations of ZnO with HNTs or GO. The structural characteristics of the nanocomposites were characterized using SEM, EDX, Raman spectroscopy, and XRD. Their enhanced photocatalytic activity was demonstrated by the degradation of rhodamine b in water, showing 95% photodegradation under UV illumination for 60 min, while the ZnO nanoparticles showed only 56% dye degradation under the same condition. Additionally, the degradation rate was enhanced by four times. Furthermore, the catalysts maintained their initial activity with no significant loss after four uses, showing their potential for practical implementation in the mass purification of wastewater.

Synthesis and characterization of NiO/Cr2O3 nanocomposite with effective sunlight driven photocatalytic degradation of organic dyes

In this paper, nanocomposite NiO/Cr₂O₃ has been synthesized by a simple chemical reduction method to study its photocatalytic activity under sunlight irradiation. Various advanced analytical techniques including powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive spectroscopy (EDS), elemental mapping, Fourier transform infrared spectroscopy (FTIR), and UV-visible spectroscopy have been utilized to characterize the synthesized NiO/Cr₂O₃ nanocomposite. SEM images show the sheet-shaped morphology of NiO/Cr₂O₃ nanocomposite. These sheets have a rough surface with nano to micro size cracks. These cracks play important role in the enhancement of photocatalytic activity by increasing surface active sites for the adsorption of dye molecules on the surface of the photocatalyst. The organic dyes crystal violet (CV) and methylene blue (MB) have been chosen to study the photocatalytic behavior of NiO/Cr₂O₃ nanocomposite under sunlight irradiation. The photocatalytic efficiency of NiO/Cr₂O₃ nanocomposite has been obtained 88.47% and 93.63% against crystal violet and methylene blue respectively. The results of the photocatalytic kinetics exhibit that degradation rate constant value for crystal violet dye is higher as compared to methylene blue dye. Obtained kinetic results indicate that synthesized nanocomposite acts as an efficient photocatalyst for the degradation of both crystal violet dye and methylene blue dye. NiO/Cr₂O₃ nanocomposite also exhibited reusability and stability for photocatalytic degradation of both organic dyes. Photoelectrochemical measurements as photocurrent, electrochemical impedance spectroscopy (EIS), and Mott-Schottky plot were also performed for synthesized NiO/Cr₂O₃ nanocomposite. Consequently, this synthesized NiO/Cr₂O₃ nanocomposite can be utilized for environmental remediation of harmful dyes.

Sunlight-driven photocatalytic degradation of ciprofloxacin and organic dyes by biosynthesized rGO-ZrO2 nanocomposites

Aquatic ecology has been greatly threatened by the discharge of effluents of textile and antibiotic industries into natural waters. Herein, an efficient and easily recycled reduced graphene oxide/zirconium oxide nanocomposite has been synthesized using banana peel extract (abbreviated as rGO-ZrO₂ in this work). The X-ray diffraction (XRD), field emission scanning electronic microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), Brunauer-Emmett-Teller (BET), UV-visible diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR) spectroscopy were used to analyze the synthesized material. The as-prepared rGO-ZrO₂ nanocomposite was employed as a photocatalyst for the decomposition of rhodamine blue (RhB) and crystal violet (CV) dyes, and ciprofloxacin (CIP) antibiotic by illumination with direct sunlight. The RhB and CV were degraded to maximum extent of around 86 and 90%, respectively, over the rGO-ZrO₂ nanocomposite after exposure to direct sunlight for 120 min. On the other hand, the degradation of CIP was approximately 93.1% over the rGO-ZrO₂ nanocomposite in 240 min under same experimental conditions. Further studies were performed regarding the role of parameters like pH, catalyst dose, and scavengers, in order to understand the superiority of rGO-ZrO₂ nanocomposite in degrading organic pollutants. Moreover, the intermediate products and plausible CIP degradation mechanisms were examined using liquid chromatography-mass spectrometry (LC-MS). Moreover, the catalyst was easily separated from the solution and demonstrated good stability and reusability. The RhB, CV, and CIP removal efficiency were 80%, 83%, and 88%, respectively, after five cycles.

Ag2CO3-Based Photocatalyst with Enhanced Photocatalytic Activity for Endocrine-Disrupting Chemicals Degradation: A Review

Endocrine-disrupting chemicals (EDCs) in the aquatic environment have garnered a lot of attention during the past few years. Due to their toxic behavior, which interferes with endocrine functions in both humans and aquatic species, these types of compounds have been recognized as major polluting agents in wastewater effluents. Therefore, the development of efficient and sustainable removal methods for these emerging contaminants is essential. Photocatalytic removal of emerging contaminants using silver carbonate (Ag2CO3)-based photocatalyst is a promising process due to the unique characteristics of this catalyst, such as absorption of a larger fraction of the solar spectrum, wide band gap, non-toxicity, and low cost. The photocatalytic performance of Ag2CO3 has recently been improved through the doping of elements and optimization variation of operational parameters resulting in decreasing the rate of electron–hole pair recombination and an increase in the semiconductor’s excitation state efficiency, which enables the degradation of contaminants under UV or visible light exposure. This review summarized some of the relevant investigations related to Ag2CO3-based photocatalytic materials for EDC removal from water. The inclusion of Ag2CO3-based photocatalytic materials in the water recovery procedure suggests that the creation of a cutting-edge protocol is essential for successfully eliminating EDCs from the ecosystem.

A General Synthetic Route to High-Quality Perovskite Oxide Nanoparticles and Their Enhanced Solar Photocatalytic Activity

The main limitations of current methods for synthesizing perovskite oxide (ABO₃ ) nanoparticles (NPs), e.g., the high reagent costs and sophisticated equipment, the long time and high-temperature processing, or multiple post-processing and thermal treatment steps, hamper their full study and potential application. Here, we use a facile low temperature (50 °C) chemical bath synthesis and only one annealing step to successfully produce high phase purity and crystalline quality nano-shaped rare-earth-based REMO₃ NPs (RE=La, Nd, Sm, Gd; M=Fe, Mn, Al). We also show the versatility of this approach by fabricating La_0.7 Sr_0.3 MnO₃ solid solution and non-RE-based BiFeO₃ perovskite. To assess the potential of the as-prepared REFeO₃ and REMnO₃ NPs, they are used for photocatalytic degradation of the norfloxacin antibiotic and show high efficiency. We believe this easy, robust, versatile, and general route for synthesizing ABO₃ -based NPs can be further explored in the vast perovskite family and beyond.

Spatial Separation of Electrons and Holes among ZnO Polar {0001} and {101̅0} Facets for Enhanced Photocatalytic Performance

Spatial separation of electrons and holes is critical for improving their photocatalytic performance, which is ascribed to the suppressed photoinduced carriers' recombination among facets. In this work, the ZnO-Au-MnO _x heterogeneous nanostructure photocatalyst was prepared by photodepositing Au and MnO _x on the ZnO polar {0001} and {101̅0} crystal facets, respectively. The photocatalytic performance of ZnO-Au-MnO _x was higher than ZnO and ZnO-Au for the degradation of rhodamine B dye under UV light irradiation. Due to the potential difference between different crystal planes of zinc oxide, electrons and holes will migrate to different crystal planes of zinc oxide. This will lead to the deposition of Au and MnO _x on different crystal facets of zinc oxide. The efficient photoinduced carrier separation of ZnO-Au-MnO _x resulted in the high photocatalytic activity, which is well supported by photoelectrochemical and photoluminescence analyses. The intermediated species formed during the reaction were investigated by high performance liquid chromatography. The reaction mechanism was investigated by radical trapping experiments and electron spin resonance analysis. The special structure of selective deposition of redox cocatalysts on the different facets should be promising and intriguing for designing highly efficient photocatalysts.

Rational design of Ag2CO3-loaded SGO heterostructure with enhanced photocatalytic abatement of organic pollutants under visible light irradiation

The photocatalytic activity of semiconducting silver carbonate was restricted by the lower stability and fast recombination rate of photogenerated electron-hole pairs. Sulfur-doped graphene oxide (SGO) is used as a cocatalyst for improving the photocatalytic activity of Ag₂CO₃ by reducing the recombination rate. A simple precipitation method was used for the modification of silver carbonate. The chemical, physical, optical, and electrochemical properties of the modified photocatalyst was characterized by XRD, SEM, TEM, UV-vis DRS, XPS, CV, impedance, and amperometry. The fabricated SGO-Ag₂CO₃ composite was successfully degraded various organic pollutants such as methylene blue (MB), rhodamine B(RhB), methyl orange (MO), tartrazine, and thiram with augmented mineralization. The optimization of weight percentage of the developed binary composite with 0.5% SGO-Ag₂CO₃ showed enhanced photocatalytic degradation and followed pseudo-first-order kinetics with rate constant 0.126. More than 90% of degradation efficiency of the pollutants within a short time promises the binary heterostructure for future industrial applications. The excellent stability and reproducibility of the composite opened a new route in the treatment of wastewater.

Recent developments in photocatalysis of industrial effluents ։ A review and example of phenolic compounds degradation

Industrial expansion and increased water consumption have created water scarcity concerns. Meanwhile, conventional wastewater purification methods have failed to degrade recalcitrant pollutants efficiently. The present review paper discusses the recent advances and challenges in photocatalytic processes applied for industrial effluents treatment, with respect to phenolic compounds degradation. Key operational parameters including the catalyst loading, light intensity, initial pollutants concentration, pH, and type and concentrations of oxidants are evaluated and discussed. Compared to the other examined controlling parameters, pH has the highest effect on the photo-oxidation of contaminants by means of the photocatalyst ionization degree and surface charge. Furthermore, major phenolic compounds derived from industrial sources are comprehensively presented and the applicability of photocatalytic processes and the barriers in practical applications, including high energy demand, technical challenges, photocatalyst stability, and recyclability have been explored. The importance of energy consumption and operational costs for realistic large-scale processes are also discussed. Finally, research gaps in this area and the suggested direction for improving degradation efficiencies in industrial applications are presented. In the light of these premises, selective degradation processes in real water matrices such as untreated sewage are proposed.

Oxidative degradation of p-chlorophenol by the persulfate-doped Fe-Mn bimetallic hydroxide, the parametrical significance, and systematical optimization

Aqueous Fe(II)-catalyzed activation commonly deteriorates the oxidation performance of persulfate (PS) to the treatment of organic contaminants. In this study, a PS-doped layered bimetallic hydroxide (Fe-Mn hydroxide) was synthesized to construct a heterogeneously catalytic system to solve the issue brought by homogeneity. The molar ratio of Fe(II) to Mn(II) and the mass ratio of PS to Fe-Mn hydroxide both had a significant impact on the catalytic degradation of p-CP. Reaction temperatures engaged in the most essential role in influencing the degradation and removal of p-chlorophenol (p-CP). The optimal combination of factors for the preparation of PS-hydroxide and the treatment of p-CP was finally determined by significance analysis. The degradation process was appropriately fitted by the pseudo-first-order kinetic model. The benzene ring in p-CP was broken by PS-hydroxide during the adsorption. The surface modification of PS-hydroxide caused by the valence transition of Mn was beneficial to the adsorption and catalytic degradation of p-CP.

Applications of Nanotechnology in Smart Textile Industry: A Critical Review

•

Current trends of using nanotechnology in textile industries.

•

Nanotechnology-driven techniques for fabrication and modification of textile fibers.

•

Wearable nanotechnology for energy storage, sensing, drug release, optics, electronics and photonics.

•

Environmental concerns associated with nanotechnology processed textiles.

Background

In recent years, nanotechnology has been playing an important role in designing smart fabrics. Nanomaterials have been employed to introduce in a sustainable manner, antimicrobial, ultraviolet resistant, electrically conductive, optical, hydrophobic and flame-retardant properties into textiles and garments. Nanomaterial based smart devices are now also being integrated with the textiles so as to perform various functions such as energy harvesting and storage, sensing, drug release and optics. These advancements have found wide applications in the fashion industry and are being developed for wider use in defence, healthcare and on-body energy harnessing applications.

Aim of review

The objective of this work is to provide an insight into the current trends of using nanotechnology in the modern textile industries and to inspire and anticipate further research in this field. This review provides an overview of the most current advances concerning on-body electronics research and the wonders which could be realized by nanomaterials in modern textiles in terms of total energy reliance on our clothes.

Key scientific concepts of review

The work underlines the various methods and techniques for the functionalization of nanomaterials and their integration into textiles with an emphasis on cost-effectiveness, comfort, wearability, energy conversion efficiency and eco-sustainability. The most recent trends of developing various nanogenerators, supercapacitors and photoelectronic devices on the fabric are highlighted, with special emphasis on the efficiency and wearability of the textile. The potential nanotoxicity associated with the processed textiles due to the tendency of these nanomaterials to leach into the environment along with possible remediation measures are also discussed. Finally, the future outlook regarding progress in the integration of smart nano-devices on textile fabrics is provided.

Application of Bi12ZnO20 Sillenite as an Efficient Photocatalyst for Wastewater Treatment: Removal of Both Organic and Inorganic Compounds

This work aims to synthesize and characterize a material that can be used as an effective catalyst for photocatalytic application to remove both organic and inorganic compounds from wastewater. In this context, sillenite Bi12ZnO20 (BZO) in a pure phase was synthesized using the sol-gel method. Before calcination, differential scanning calorimetry (DSC) analysis was done to determine the temperature of the formation of the sillenite phase, which was found to be 800 °C. After calcination, the phase was identified by X-ray diffraction (XRD) and then refined using the Rietveld refinement technique. The results prove that BZO crystals have a cubic symmetry with the space group I23 (N°197); the lattice parameters of the structure were also determined. From the crystalline size, the surface area was estimated using the Brunauer-Emmett-Teller (BET) method, which was found to be 11.22 m2/g. The formation of sillenite was also checked using the Raman technique. The morphology of the crystals was visualized using electron scanning microscope (SEM) analysis. After that, the optical properties of BZO were investigated by diffuse reflectance spectroscopy (DRS) and photoluminescence (PL); an optical gap of 2.9 eV was found. In the final step, the photocatalytic activity of the BZO crystals was evaluated for the removal of inorganic and organic pollutants, namely hexavalent chromium Cr(VI) and Cefixime (CFX). An efficient removal rate was achieved for both contaminants within only 3 h, with a 94.34% degradation rate for CFX and a 77.19% reduction rate for Cr(VI). Additionally, a kinetic study was carried out using a first-order model, and the results showed that the kinetic properties are compatible with this model. According to these findings, we can conclude that the sillenite BZO can be used as an efficient photocatalyst for wastewater treatment by eliminating both organic and inorganic compounds.

Synthesis of vertical WO3 nanoarrays with different morphologies using the same protocol for enhanced photocatalytic and photoelectrocatalytic performances

Tungsten trioxide (WO3) nanoarrays with different morphologies were successfully synthesized by a hydrothermal method on an FTO substrate. Various nanostructures of WO3 including nanoflakes, nanoplates, nanoflowers and nanorods were obtained by adjusting only the acidity of the precursor solution. XRD patterns confirmed that the as-prepared orthorhombic WO3·0.33H2O transformed to the monoclinic WO3 phase under annealing at 500 °C. UV-Vis absorbance spectroscopy indicated that the absorption edge of WO3 nanoflowers exhibited a slight red-shift compared to other morphologies of WO3. The obtained WO3 nanoflower arrays exhibit the highest photocurrent density and photocatalytic degradation activity towards methylene blue. Finally, the mechanism of the photocatalytic degradation of methylene blue by WO3 is discussed.

Advances of the highly efficient and stable visible light active photocatalyst Zr(IV)-phthalate coordination polymer for the degradation of organic contaminants in water

This work presents the restoration of the Zr-phthalate coordination polymer (Zr-Ph CP) via valuable application in photocatalysis. Zr-Ph CP was facilely synthesized using a soft hydrothermal method at 70 °C, and was characterized utilizing FTIR, Raman Spectrosopy, XPS, PXRD, SEM/EDX, BET, and a hyperspectral camera. Assessment of its photocatalytic degradation potential was performed against two different dyes, the cationic methylene blue (MB) and the anionic methyl orange (MO), as frequent models of organic contaminants, under properly selected mild visible illumination (9 W) where the bandgap energy (Eg) was determined to be 2.72 eV. Effects of different initial pH values and different dyes' initial concentrations were covered. Photocatalytic degradation studies showed that Zr-Ph CP effectively degraded both dyes for initial pH 7 within about 40-60 minutes. Degradation rate constants were calculated as 0.17 and 0.13 min-1 for MB and MO, respectively. Generally, both direct and indirect mechanisms share in the degradation, where adsorption has shown an important role. The repeated use of Zr-Ph CP does not significantly affect its photocatalytic performance suggesting high water stability.

Mesoporous LaFeO3: Synergistic Effect of Adsorption and Visible Light Photo-Fenton Processes for Phenol Removal from Refinery Wastewater

Mesoporous LaFeO3 as a visible light-driven photocatalyst was prepared by a nanocasting method using mesoporous silica (SBA-15) as a hard template. The as-prepared LaFeO3 photocatalyst was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N2 adsorption-desorption, X-ray photoelectron spectroscopy (XPS), and optical absorption spectra. The characterization studies and experimental results showed that LaFeO3 with porous structure caused by the removal of SBA-15 hard template could enhance the specific surface area of the resulting photocatalyst, which improves the phenol adsorption ability of the photocatalyst and in turn enhances its photo-Fenton catalytic activity. The photo-Fenton catalytic activity of the photocatalyst was investigated by photo-Fenton degradation of aqueous phenol under visible light irradiation. The effects of catalyst dosage, H2O2 concentration, and solution pH on the photo-Fenton catalytic degradation of phenol using mesoporous LaFeO3 were studied and optimized. Under the optimal conditions of 20 mg L−1 phenol, 1.0 g L−1 catalyst, and 10 mM H2O2 at pH = 5, the photo-Fenton degradation of phenol (93.47%) was achieved in 180 min under visible light irradiation. Furthermore, our results proved the stability and reusability of mesoporous LaFeO3 and revealed its catalytic mechanism for the photo-Fenton degradation of phenol.

Activity enhancement pathways in LaFeO3@TiO2 heterojunction photocatalysts for visible and solar light driven degradation of myclobutanil pesticide in water

LaFeO₃@TiO₂ heterojunction composites with a core-shell porous structure and LaFeO₃ contents in the 2.5-25 wt.% range have been synthesized via consecutive sol-gel syntheses and tested for the photocatalytic oxidation of the myclobutanil pesticide in water under solar light and pure visible light. Whatever the light spectrum, the kinetic rate constants for both myclobutanil degradation and TOC conversion exhibited a volcano-like profile with increasing the narrow band-gap (2.1 eV) LaFeO₃ content, the optimum composite strongly overperforming both single phases, with full myclobutanil mineralization achieved in 240 min in the best case. The light spectrum influenced the optimum LaFeO₃ content in the composite, being observed at 5 wt.% and 12.5 wt.% under solar and visible light, respectively. This has been attributed to the existence of different light-mediated reaction mechanisms. The optimum LaFeO₃/TiO₂ composite photocatalyst was active and stable after several runs under solar light with leached iron concentration below 0.1 mg/L in solution.

Synthesis and characterization of L-asparagine stabilised gold nanoparticles: Catalyst for degradation of organic dyes

L-asparagine functionalized gold nanoparticles (Asp-AuNPs), have been synthesized by reducing HAuCl₄ in presence of L-asparagine at 70 °C for 8 h. Asp-AuNPs were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS); the nanoparticles formed were spherical in shape with average size of 13.5 ± 3.7 nm. Synthesized Asp-AuNPs were found to exhibit excellent catalytic properties for the degradation of different organic dyes viz. Rhodamine B (RB), methyl orange (MO), acid red 27 (amaranth) and xylenol orange (XO) in the presence of sodium borohydride (NaBH₄). Asp-AuNPs acts as electron relay system and serve as effective catalyst for complete degradation of all the tested dyes. Rate kinetic investigations suggested that catalysed degradation reactions follow pseudo-first order reaction kinetics with rate constant of 0.904 min^-1, 0.314 min^-1, 0.228 min^-1 and 0.1 min^-1 for RB, MO, amaranth and XO respectively.

Biogenic synthesis of a green tea stabilized PPy/SWCNT/CdS nanocomposite and its substantial applications, photocatalytic degradation and rheological behavior

A green tea leaf-derived cadmium sulfide quantum dot-based system containing different weight percentages of single-walled carbon nanotubes (SWCNTs) and polypyrrole, named PSC, was designed via a green method. The photocatalytic degradation of Ponceau BS dye (λ _max 505 nm) in the presence of PSC was measured. PSC with the highest weight percentage of SWCNTs (7-PSC) showed maximum photocatalytic activity, with 94.6% dye degradation in 55 minutes of irradiation time. This significant enhancement was due to the synergism in the intrinsic properties of the parent components. Alongside this, the rheological behavior of the prepared nanomaterial PSC was examined at constant (100 s^-1) and varying shear rate from 0 to 500 s^-1 at a fixed temperature of 25 °C for a specified volume percentage of 0.1% using Castrol class: 15W-40 engine oil as a base fluid. The objective of lowering the viscosity of engine oil by 98.9% (initial: 0.221000 Pa s, final: 0.0022 Pa s.) was achieved by chartering/mixing the prepared PSC nanomaterial into the engine oil. A comparative study of the experimental and simulation outputs implied the high precision of the modeling via a neural network with minute 0.373 average % errors.

Symbiotic, low-temperature, and scalable synthesis of bi-magnetic complex oxide nanocomposites

Functional oxide nanocomposites, where the individual components belong to the family of strongly correlated electron oxides, are an important class of materials, with potential applications in several areas such as spintronics and energy devices. For these materials to be technologically relevant, it is essential to design low-cost and scalable synthesis techniques. In this work, we report a low-temperature and scalable synthesis of prototypical bi-magnetic LaFeO₃-CoFe₂O₄ nanocomposites using a unique sol-based synthesis route, where both the phases of the nanocomposite are formed during the same time. In this bottom-up approach, the heat of formation of one phase (CoFe₂O₄) allows the crystallization of the second phase (LaFeO₃), and completely eliminates the need for conventional high-temperature annealing. A symbiotic effect is observed, as the second phase reduces grain growth of the first phase, thus yielding samples with lower particle sizes. Through thermogravimetric, structural, and morphological studies, we have confirmed the reaction mechanism. The magnetic properties of the bi-magnetic nanocomposites are studied, and reveal a distinct effect of the synthesis conditions on the coercivity of the particles. Our work presents a basic concept of significantly reducing the synthesis temperature of bi-phasic nanocomposites (and thus also the synthesis cost) by using one phase as nucleation sites for the second one, as well as using the heat of formation of one phase to crystallize the other.

Rare-earth-containing perovskite nanomaterials: design, synthesis, properties and applications

As star material, perovskites have been widely used in the fields of optics, photovoltaics, electronics, magnetics, catalysis, sensing, etc. However, some inherent shortcomings, such as low efficiency (power conversion efficiency, external quantum efficiency, etc.) and poor stability (against water, oxygen, ultraviolet light, etc.), limit their practical applications. Downsizing the materials into nanostructures and incorporating rare earth (RE) ions are effective means to improve their properties and broaden their applications. This review will systematically summarize the key points in the design, synthesis, property improvements and application expansion of RE-containing (including both RE-based and RE-doped) halide and oxide perovskite nanomaterials (PNMs). The critical factors of incorporating RE elements into different perovskite structures and the rational design of functional materials will be discussed in detail. The advantages and disadvantages of different synthesis methods for PNMs will be reviewed. This paper will also summarize some practical experiences in selecting suitable RE elements and designing multi-functional materials according to the mechanisms and principles of REs promoting the properties of perovskites. At the end of this review, we will provide an outlook on the opportunities and challenges of RE-containing PNMs in various fields.

Hierarchically porous BiOCl@NiCo2O4 nanoplates as low-cost and highly efficient catalysts for the discoloration of organic contaminants in aqueous media

BiOCl@NiCo₂O₄ exhibits remarkable catalytic activity and stability and can be used to deal with real contaminated water samples.

Ag2S-Sensitized NiO-ZnO Heterostructures with Enhanced Visible Light Photocatalytic Activity and Acetone Sensing Property

Visible light-driven Ag2S-grafted NiO-ZnO ternary nanocomposites are synthesized using a facile and cost-effective homogeneous precipitation method. The structural, morphological, and optical properties were extensively studied, confirming the formation of ternary nanocomposites. The surface area of the synthesized nanocomposites was calculated by electrochemical double-layer capacitance (C dl). Ternary Ag2S/NiO-ZnO nanocomposites showed excellent visible light photocatalytic property which increases further with the concentration of Ag2S. The maximum photocatalytic activity was shown by 8% Ag2S/NiO-ZnO with a RhB degradation efficiency of 95%. Hydroxyl and superoxide radicals were found to be dominant species for photodegradation of RhB, confirmed by scavenging experiments. It is noteworthy that the recycling experiments demonstrated high stability and recyclable nature of the photocatalyst. Moreover, the electrochemical results indicated that the prepared nanocomposite exhibits remarkable activity toward detection of acetone. The fabricated nanocomposite sensor showed high sensitivity (4.0764 μA mmol L-1 cm-2) and a lower detection limit (0.06 mmol L-1) for the detection of acetone. The enhanced photocatalytic and the sensing property of Ag2S/NiO-ZnO can be attributed to the synergistic effects of strong visible light absorption, excellent charge separation, and remarkable surface properties.

Perovskite-type LaFeO3: Photoelectrochemical Properties and Photocatalytic Degradation of Organic Pollutants Under Visible Light Irradiation

Perovskite-type oxides lanthanum ferrite (LaFeO3) photocatalysts were successfully prepared by a facile and cost-effective sol-gel method using La(NO)3 and Fe(NO)3 as metal ion precursors and citric acid as a complexing agent at different calcination temperatures. The properties of the resulting LaFeO3 samples were characterized by powder X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDXS), UV-Vis diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectra (IR), transmission electron microscopy (TEM), N2 adsorption/desorption and photoelectrochemical tests. The photoactivity of the LaFeO3 samples was tested by monitoring the photocatalytic degradation of Rhodamine B (RhB) and 4-chlorophenol (4-CP) under visible light irradiation, the highest photocatalytic activity was found for LaFeO3 calcined at 700 °C, which attributed to the relatively highest surface area (10.6 m2/g). In addition, it was found from trapping experiments that the reactive species for degradation were superoxide radical ions (O2−) and holes (h+). Photocurrent measurements and electrochemical impedance spectroscopy (EIS) proved the higher photo-induced charge carrier transfer and separation efficiency of the LaFeO3 sample calcined at 700 °C compared to that that calcined at 900 °C. Band positions of LaFeO3 were estimated using the Mott-Schottky plots, which showed that H2 evolution was not likely.

Zinc oxide-decorated polypyrrole/chitosan bionanocomposites with enhanced photocatalytic, antibacterial and anticancer performance

A bio-nanocomposite matrix of polypyrrole grafted ZnO/chitosan (Ppy/C/Z) was synthesized via the in situ polymerization of pyrrole with different weight fractions of ZnO. Incorporation of ZnO nanoparticles with polypyrrole enhances the photocatalytic, antibacterial as well as cytotoxic properties of the resultant composite. Characterizations of the synthesized product were performed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and thermal analysis (TGA and DTA). Surface morphology and particle size were determined by SEM and TEM. The elemental composition of the material was studied by EDX coupled with SEM. Electrochemical surface area was calculated from electrochemical double layer capacitance (EDLC) measurements using cyclic voltammetry. The photocatalytic activity of the composite material was tested by monitoring the degradation of reactive orange-16 (RO-16), Coomassie Brilliant Blue R-250 (CBB-R-250) and Methylene Blue (MB) dyes and the composite was found to be an effective catalyst in the presence of a UV light source. Various scavengers were used to detect the reactive species involved in the photocatalytic process. Furthermore, the stability of the photocatalyst was assessed by recycling experiments. Moreover, the Ppy/C/Z bio-nanocomposite shows potential application with anti-bacterial and anti-cancer activity against Gram-positive and Gram-negative bacterial pathogens and human cancer cell lines (HeLa and MCF-7). The experimental data confirm that the bio-nanocomposite of Ppy/C/Z showed excellent anti-bacterial and anti-cancer activity as compared to a pristine polypyrrole and chitosan formulation (Ppy/C). The apoptosis data with varying concentrations of Ppy/C/Z reveal the remarkable activity against these cancer cell lines.

Bio-nanocomposites were synthesized via grafting polypyrrole/ZnO onto chitosan chain for the photodegradation of organic pollutants and biomedical applications.

A novel n-type CdS nanorods/p-type LaFeO3 heterojunction nanocomposite with enhanced visible-light photocatalytic performance

In this work, a novel n-type CdS nanorods/p-type LaFeO₃ (CdS NRs/LFO) nanocomposite was prepared, for the first time, via a facile solvothermal method. The as-prepared n-CdS NRs/p-LFO nanocomposite was characterized by using powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), energy-dispersive X-ray spectroscopy (EDX), UV-visible diffuse reflection spectroscopy (DRS), vibrating sample magnetometry (VSM), photoluminescence (PL) spectroscopy, and Brunauer–Emmett–Teller (BET) surface area analysis. All data revealed the attachment of the LFO nanoparticle on the surface of CdS NRs. This novel nanocomposite was applied as a novel visible light photocatalyst for the degradation of methylene blue (MB), rhodamine B (RhB) and methyl orange (MO) dyes under visible-light irradiation. Under optimized conditions, the degradation efficiency was 97.5% for MB, 80% for RhB and 85% for MO in the presence of H₂O₂ and over CdS NRs/LFO nanocomposite. The photocatalytic activity of CdS NRs/LFO was almost 16 and 8 times as high as those of the pristine CdS NRs and pure LFO, respectively. The photocatalytic activity was enhanced mainly due to the high efficiency in separation of electron–hole pairs induced by the remarkable synergistic effects of CdS and LFO semiconductors. After the photocatalytic reaction, the nanocomposite can be easily separated from the reaction solution and reused several times without loss of its photocatalytic activity. Trapping experiments indicated that ·OH radicals were the main reactive species for dye degradation in the present photocatalytic system. On the basis of the experimental results and estimated energy band positions, the mechanism for the enhanced photocatalytic activity was proposed.

A novel n–p CdS nanorods/LaFeO₃ (CdS NRs/LFO) heterojunction nanocomposite was prepared via a solvothermal route and applied as a visible-light photocatalyst for enhanced degradation of organic dye pollutants.

Improved visible-light photoactivities of porous LaFeO3 by coupling with nanosized alkaline earth metal oxides and mechanism insight

It is significant to improve visible-light photoactivities of porous LaFeO₃ by coupling with nanosized alkaline earth metal oxides as dual-functional platform for accepting the high level electrons and activating CO₂.

Dual-functional persistent luminescent nanoparticles with enhanced persistent luminescence and photocatalytic activity

NIR persistent luminescence and photocatalytic activity of the PLNPs were significantly and simultaneously improved via additional doping of Bi³⁺.