Effect of Agitation Method on the Nanosized Degradation of Polystyrene Microplastics Dispersed in Water

Nanoplastics composite norfloxacin induced changes in conformation and function of lysozyme and differential effects of co-exposure contamination

The concurrent environmental contamination by nanoplastics (NPs) and norfloxacin (NOR) is a burgeoning concern, with significant accumulations in various ecosystems and potential ingress into the human body via the food chain, posing threats to both public health and ecological balance. Despite the gravity of the situation, studies on the co-exposure contamination effects of these substances are limited. Moreover, the response mechanisms of key functional proteins to these pollutants are yet to be fully elucidated. In this work, we conducted a comprehensive assessment of the interaction mechanisms of NPs and NOR with lysozyme under both single and co-exposure condition, utilizing dynamic light scattering, ζ-potential measurements, multi-spectroscopy methods, enzyme activity assays and molecular docking, to obtain a relationship between the compound effects of NPs and NOR. Our results indicate that NPs adsorb NOR on their surface, forming more stable aggregates. These aggregates influence the conformation, secondary structure (α-Helix ratio decreased by 3.1 %) and amino acid residue microenvironment of lysozyme. And changes in structure affect the activity of lysozyme (reduced by 39.9 %) with the influence of composited pollutants exerting stronger changes. Molecular simulation indicated the key residues Asp 52 for protein function located near the docking site, suggesting pollutants preferentially binds to the active center of lysozyme. Through this study, we have found the effect of increased toxicity on lysozyme under the compounded conditions of NPs and NOR, confirming that the increased molecular toxicity of NPs and NOR is predominantly realized through the increase in particle size and stability of the aggregates under weak interactions, as well as induction of protein structural looseness. This study proposes a molecular perspective on the differential effects and mechanisms of NPs-NOR composite pollution, providing new insights into the assessment of in vitro responses to composite pollutant exposure.

Oxidative stress, biofilm-formation and activity responses of P. aeruginosa to microplastic-treated sediments: Effect of temperature and sediment type

Climate change and plastic pollution are the big environmental problems that the environment and humanity have faced in the past and will face in many decades to come. Sediments are affected by many pollutants and conditions, and the behaviors of microorganisms in environment may be influenced due to changes in sediments. Therefore, the current study aimed to explore the differential effects of various microplastics and temperature on different sediments through the metabolic and oxidative responses of gram-negative Pseudomonas aeruginosa. The sediments collected from various fields including beaches, deep-sea discharge, and marine industrial areas. Each sediment was extracted and then treated with various microplastics under different temperature (-18, +4, +20 and 35 °C) for seven days. Then microplastics were removed from the suspension and microplastic-exposed sediment samples were incubated with Pseudomonas aeruginosa to test bacterial activity, biofilm, and oxidative characteristics. The results showed that both the activity and the biofilm formation of Pseudomonas aeruginosa increased with the temperature of microplastic treatment in the experimental setups at the rates between an average of 2-39 % and 5-27 %, respectively. The highest levels of bacterial activity and biofilm formation were mainly observed in the beach area (average rate +25 %) and marine industrial (average rate +19 %) sediments with microplastic contamination, respectively. Moreover, oxidative characteristics significantly linked the bacterial activities and biofilm formation. The oxidative indicators of Pseudomonas aeruginosa showed that catalase and glutathione reductase were more influenced by microplastic contamination of various sediments than superoxide dismutase activities. For instance, catalase and glutathione reductase activities were changed between -37 and +169 % and +137 to +144 %, respectively; however, the superoxide dismutase increased at a rate between +1 and + 21 %. This study confirmed that global warming as a consequence of climate change might influence the effect of microplastic on sediments regarding bacterial biochemical responses and oxidation characteristics.

Culture dependent analysis of bacterial activity, biofilm-formation and oxidative stress of seawater with the contamination of microplastics under climate change consideration

Temperature changes due to climate change and microplastic contamination are worldwide concerns, creating various problems in the marine environment. Therefore, this study was carried out to discover the impact of different temperatures of seawater exposed to different types of plastic materials on culture dependent bacterial responses and oxidative characteristics. Seawater was exposed to microplastics obtained from various plastic materials at different temperature (-18, +4, +20, and +35 °C) for seven days. Then microplastics were removed from the suspension and microplastic-exposed seawater samples were analyzed for bacterial activity, biofilm formation and oxidative characteristics (antioxidant, catalase, glutathione, and superoxide dismutase) using Gram-negative Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus. The results showed that the activity and biofilm formation of Pseudomonas aeruginosa and Staphylococcus aureus were affected through oxidative stress by catalase, glutathione, and superoxide dismutase due to the microplastic deformation by temperature changes. This study confirms that temperature changes as a result of climate change might influence microplastic degradation and their contamination impact in seawater in terms of bacterial metabolic and oxidation reactions.

Advances in chemical removal and degradation technologies for microplastics in the aquatic environment: A review

In recent years, global attention has been extensively focused on the water pollution and health risks caused by microplastics(MPs), thereby making the treatment of microplastics a key area of research. Chemical removal and degradation present effective approaches to addressing this issue. Consequently, this review summarizes the latest research advancements in the chemical removal and degradation of microplastics in water, comparing the treatment efficacy and advantages and disadvantages of various removal/degradation techniques. It elucidates the chemical mechanisms underlying the removal/degradation of microplastics and identifies the primary influencing factors during the treatment process. A systematic analysis of the performance of microplastic treatment technologies is conducted, examining the impact of microplastic characteristics, operational conditions, and other parameters on the effectiveness of microplastic treatment.

Emerging isolation and degradation technology of microplastics and nanoplastics in the environment

Microplastics (MPs, less than 5 mm in size) are widely distributed in surroundings in various forms and ways, and threaten ecosystems security and human health. Its environmental behavior as pollutants carrier and the after-effects exposed to MPs has been extensively exploited; whereas, current knowledge on technologies for the separation and degradation of MPs is relatively limited. It is essential to isolate MPs from surroundings and/or degrade to safe levels. This in-depth review details the origin and distribution of MPs. Provides a comprehensive summary of currently available MPs separation and degradation technologies, and discusses the mechanisms, challenges, and application prospects of these technologies. Comparison of the contribution of various separation methods to the separation of NPs and MPs. Furthermore, the latest research trends and direction in bio-degradation technology are outlooked.

Sources, Degradation, Ingestion and Effects of Microplastics on Humans: A Review

Celluloid, the predecessor to plastic, was synthesized in 1869, and due to technological advancements, plastic products appear to be ubiquitous in daily life. The massive production, rampant usage, and inadequate disposal of plastic products have led to severe environmental pollution. Consequently, reducing the employment of plastic has emerged as a pressing concern for governments globally. This review explores microplastics, including their origins, absorption, and harmful effects on the environment and humans. Several methods exist for breaking down plastics, including thermal, mechanical, light, catalytic, and biological processes. Despite these methods, microplastics (MPs, between 1 and 5 mm in size) continue to be produced during degradation. Acknowledging the significant threat that MPs pose to the environment and human health is imperative. This form of pollution is pervasive in the air and food and infiltrates our bodies through ingestion, inhalation, or skin contact. It is essential to assess the potential hazards that MPs can introduce. There is evidence suggesting that MPs may have negative impacts on different areas of human health. These include the respiratory, gastrointestinal, immune, nervous, and reproductive systems, the liver and organs, the skin, and even the placenta and placental barrier. It is encouraging to see that most of the countries have taken steps to regulate plastic particles. These measures aim to reduce plastic usage, which is essential today. At the same time, this review summarizes the degradation mechanism of plastics, their impact on human health, and plastic reduction policies worldwide. It provides valuable information for future research on MPs and regulatory development.

Polydopamine Modified Ceria Nanorods Alleviate Inflammation in Colitis by Scavenging ROS and Regulating Macrophage M2 Polarization

Background

Inflammatory bowel disease (IBD) is closely related to higher intracellular oxidative stress. Therefore, developing a novel method to scavenge the harmful reactive oxygen species (ROS) and alleviate colon inflammation to treat IBD is a promising strategy.

Methods

CeO2@PDA-PEG (CeO2@PP) were synthesized by modifying ceria (CeO2) nanorods with polydopamine (PDA) and polyethylene glycol (PEG). The ROS scavenging ability of CeO2@PP was detected by using flow cytometry and confocal laser scanning microscope (CLSM). The anti-inflammatory ability of CeO2@PP was determined in vitro by treating lipopolysaccharide (LPS)-stimulated RAW 264.7 macrophages. The biocompatibility of CeO2@PP was evaluated in vivo and in vitro. Moreover, the therapeutic effects of CeO2@PP in vivo were estimated in a dextran sulfate sodium salt (DSS)-induced colitis mouse model.

Results

Physicochemical property results demonstrated that PDA and PEG modification endowed CeO2 nanorods with excellent dispersibility and colloidal stability. CeO2@PP maintained superior enzyme-like activity, including superoxide dismutase (SOD) and catalase (CAT), indicating antioxidant ability. Moreover, in vitro results showed that CeO2@PP with PDA promotes LPS-induced RAW 264.7 macrophages into M2-type polarization. In addition, in vitro and in vivo results showed that CeO2@PP have great biocompatibility and biosafety. Animal experiments have shown that CeO2@PP have excellent anti-inflammatory effects against DSS-induced colitis and effectively alleviated intestinal mucosal injury.

Conclusion

The nanoplatform CeO2@PP possessed excellent antioxidant and anti-inflammatory properties for scavenging ROS and modulating macrophage polarization, which is beneficial for efficient colitis therapy.

The environmental fate of nanoplastics: What we know and what we need to know about aggregation

The presence of nanoplastics in the environment has been proven. There is now an urgent need to determine how nanoplastics behave in the environment and to assess the risks they may pose. Here, we examine nanoplastic homo- and heteroaggregation, with a focus on environmentally relevant nanoplastic particle models. We made a systematic analysis of experimental studies, and ranked the environmental relevance of 377 different solution chemistries, and 163 different nanoplastic particle models. Since polymer latex spheres are not environmentally relevant (due to their monodisperse size, spherical shape, and smooth surface), their aggregation behavior in natural conditions is not transferable to nanoplastics. A few recent studies suggest that nanoplastic particle models that more closely mimic incidentally produced nanoplastics follow different homoaggregation pathways than latex sphere particle models. However, heteroaggregation of environmentally relevant nanoplastic particle models has seldom been studied. Despite this knowledge gap, the current evidence suggests that nanoplastics may be more sensitive to heteroaggregation than previously expected. We therefore provide an updated hypothesis about the likely environmental fate of nanoplastics. Our review demonstrates that it is essential to use environmentally relevant nanoplastic particle models, such as those produced with top-down methods, to avoid biased interpretations of the fate and impact of nanoplastics. Finally, it will be necessary to determine how the heteroaggregation kinetics of nanoplastics impact their settling rate to truly understand nanoplastics' fate and effect in the environment.

Nanoparticle Tracking in Single-Antiresonant-Element Fiber for High-Precision Size Distribution Analysis of Mono- and Polydisperse Samples

Accurate determination of the size distribution of nanoparticle ensembles remains a challenge in nanotechnology-related applications due to the limitations of established methods. Here, a microstructured fiber-assisted nanoparticle tracking analysis (FaNTA) realization is introduced that breaks existing limitations through the recording of exceptionally long trajectories of rapidly diffusing polydisperse nanoparticles, resulting in excellent sizing precision and unprecedented separation capabilities of bimodal nanoparticle mixtures. An effective-single-mode antiresonant-element fiber allows to efficiently confine nanoparticles in a light-guiding microchannel and individually track them over more than 1000 frames, while aberration-free imaging is experimentally confirmed by cross-correlation analysis. Unique features of the approach are (i) the highly precise determination of the size distribution of monodisperse nanoparticle ensembles (only 7% coefficient of variation) and (ii) the accurate characterization of individual components in a bimodal mixture with very close mean diameters, both experimentally demonstrated for polymer nanospheres. The outstanding performance of the FaNTA realization can be quantified by introducing a new model for the bimodal separation index. Since FaNTA is applicable to all types of nano-objects down to sub-20 nm diameters, the method will improve the precision standard of mono- and polydisperse nanoparticle samples such as nano-plastics or extracellular vesicles.

Environmental behaviors and degradation methods of microplastics in different environmental media

Microplastics, as a group of emerging contaminants, are widely present in environmental media and have the potential to endanger the ecological environment and human health. Due to the inconsistencies and difficulties inherent in the analysis of microplastic particles, global monitoring data on the distribution of microplastics in the environment are still far from sufficient. The fate and migration of microplastics in the environment are also uncertain. Therefore, there have been increasing reviews on the distribution, biological effects, migration, and health risks of microplastics. However, reports focusing on the degradation of microplastics are still rare. Understanding and commanding the environmental behavior of microplastics are of great significance to explore the treatment of microplastic pollution. Although some preliminary studies on microplastics have been carried out, there is still an urgent need to conduct a comprehensive study on environmental behaviors and degradation methods of microplastics in different environmental media. This article summarizes the recent advances on microplastics, basically includes the distribution and ecological impact of microplastics in soil and water environments, then elaborates the migration behavior and influencing factors of microplastics, and focuses on the research progress of microplastics degradation methods. On this basis, the problems existing in the current research and the future development directions have been proposed. This review could provide a more systematic reference for the development and research of microplastics in the future.

Upcycling to Sustainably Reuse Plastics

Plastics are now indispensable in daily lives. However, the pollution from plastics is also increasingly becoming a serious environmental issue. Recent years have seen more sustainable approaches and technologies, commonly known as upcycling, to transform plastics into value-added materials and chemical feedstocks. In this review, the latest research on upcycling is presented, with a greater focus on the use of renewable energy as well as the more selective methods to repurpose synthetic polymers. First, thermal upcycling approaches are briefly introduced, including the redeployment of plastics for construction uses, 3D printing precursors, and lightweight materials. Then, some of the latest novel strategies to deconstruct condensation polymers to monomers for repolymerization or introduce vulnerable linkers to make the plastics more degradable are discussed. Subsequently, the review will explore the breakthroughs in plastics upcycling by heterogeneous and homogeneous photocatalysis, as well as electrocatalysis, which transform plastics into more versatile fine chemicals and materials while simultaneously mitigating global climate change. In addition, some of the biotechnological advances in the discovery and engineering of microbes that can decompose plastics are also presented. Finally, the current challenges and outlook for future plastics upcycling are discussed to stimulate global cooperation in this field.

Size fractionation of high-density polyethylene breakdown nanoplastics reveals different toxic response in Daphnia magna

Plastic litter is a growing environmental problem. Recently, microplastics and nanoplastics, produced during breakdown processes in nature, have been in focus. Although there is a growing knowledge concerning microplastic, little is still known about the effect of nanoplastics. We have showed that mechanical breakdown of high-density polyethylene (HDPE), followed by filtration through 0.8 µm filters, produces material toxic to the freshwater zooplankton Daphnia magna and affected the reproduction in life-time tests. However, further size fractionation and purification reveals that the nanoplastics fraction is non-toxic at these concentrations, whereas the fraction with smaller sizes, below ~ 3 nm, is toxic. The HDPE nanoplastics are highly oxidized and with an average diameter of 110 nm. We conclude that mechanical breakdown of HDPE may cause environmental problems, but that the fraction of leached additives and short chain HDPE are more problematic than HDPE nanoplastics.

Discrepancy of apoptotic events in mouse hepatocytes and catalase performance: Size-dependent cellular and molecular toxicity of ultrafine carbon black

The diversification of the production process and application of ultrafine carbon black (UFCB), one of the nanomaterials, make the difference in particle sizes that exposed to environment. Currently, few size-dependent toxicity studies of UFCB pay attention to targeted effects on detoxification organs. And there is a research gap in the size-dependent molecular toxicity of UFCB. Based on this, mouse hepatocytes and catalase (CAT) were used as targeted receptors for UFCB size-dependent cellular and molecular toxicity studies. Results indicate that UFCB_13 nm induced higher ROS and lipid peroxidation levels. And the cell viability decreased to 22.5%, which is sharp contrast to UFCB_50 nm (45.3%) and UFCB_95 nm (55.1%). Mitochondrial dysfunction and a 25.2% early apoptosis rate are the further manifestation of the stronger cytotoxicity of UFCB_13 nm. At the molecular level, the exposure of UFCB with better dispersity resulted in more significant changes in the CAT backbone and secondary structure, fluorescence sensitization and enzyme function inhibition. The combined experiments show that the cellular uptake and dispersity of UFCB are the dominating factors for the discrepancy in size-dependent cellular and molecular toxicity, respectively. This study provides a theoretical basis for the necessary circumvention and substitution of UFCB in engineering applications.

Microplastics in the environment: Occurrence, perils, and eradication

Microplastics (MPs) with sizes < 5 mm are found in various compositions, shapes, morphologies, and textures that are the major sources of environmental pollution. The fraction of MPs in total weight of plastic accumulation around the world is predicted to be 13.2% by 2060. These micron-sized MPs are hazardous to marine species, birds, animals, soil creatures and humans due to their occurrence in air, water, soil, indoor dust and food items. The present review covers discussions on the damaging effects of MPs on the environment and their removal techniques including biodegradation, adsorption, catalytic, photocatalytic degradation, coagulation, filtration and electro-coagulation. The main techniques used to analyze the structural and surface changes such as cracks, holes and erosion post the degradation processes are FTIR and SEM analysis. In addition, reduction in plastic molecular weight by the microbes implies disintegration of MPs. Adsorptive removal by the magnetic adsorbent promises complete elimination while the biodegradable catalysts could remove 70-100% of MPs. Catalytic degradation via advanced oxidation assisted by S O 4 • - or O H • radicals generated by peroxymonosulfate or sodium sulfate are also adequately covered in addition to photocatalysis. The chemical methods such as sol-gel, agglomeration, and coagulation in conjunction with other physical methods are discussed concerning the drinking water/wastewater/sludge treatments. The efficacy, merits and demerits of the currently used removal approaches are reviewed that will be helpful in developing more sophisticated technologies for the complete mitigation of MPs from the environment.

Measuring particle size distribution and mass concentration of nanoplastics and microplastics: addressing some analytical challenges in the sub-micron size range

HYPOTHESIS

The implementation of the proposal from the European Chemical Agency (ECHA) to restrict the use of nanoplastics (NP) and microplastics (MP) in consumer products will require reliable methods to perform size and mass-based concentration measurements. Analytical challenges arise at the nanometre to micrometre interface, e.g., 800 nm-10 µm, where techniques applicable at the nanometre scale reach their upper limit of applicability and approaches applicable at the micrometre scale must be pushed to their lower limits of detection.

EXPERIMENTS

Herein, we compared the performances of nine analytical techniques by measuring the particle size distribution and mass-based concentration of polystyrene mixtures containing both nano and microparticles, with the educational aim to underline applicability and limitations of each technique.

FINDINGS

Light scattering-based measurements do not have the resolution to distinguish multiple populations in polydisperse samples. Nanoparticle tracking analysis (NTA), nano-flowcytometry (nFCM) and asymmetric flow field flow fractionation hyphenated with multiangle light scattering (AF4-MALS) cannot measure particles in the micrometre range. Static light scattering (SLS) is not able to accurately detect particles below 200 nm, and similarly to transmission electron microscopy (TEM) and flow cytometry (FCM), is not suitable for accurate mass-based concentration measurements. Alternatives for high-resolution sizing and concentration measurements in the size range between 60 nm and 5 µm are tunable resistive pulse sensing (TRPS) and centrifugal liquid sedimentation (CLS), that can bridge the gap between the nanometre and micrometre range.