All-Dry Transferred ReS2 Nanosheets for Ultrasensitive Room-Temperature NO2 Sensing under Visible Light Illumination

Construction of a CoNiHHTP MOF/PHI Z-Scheme Heterojunction for ppb Level NO2 Photoelectric Sensing with 405 nm Irradiation at RT

Ultrasensitive photoelectric detection of nitrogen dioxide (NO2) with PHI under visible light irradiation at room temperature (RT) remains an ongoing challenge due to the low charge separation and scarce adsorption sites. In this work, a dimensionally matched ultrathin CoNiHHTP MOF/PHI Z-scheme heterojunction is successfully constructed by taking advantage of the π-π interactions existing between the CoNiHHTP MOF and PHI. The amount-optimized heterojunction possesses a record detection limit of 1 ppb (response = 15.6%) for NO2 under 405 nm irradiation at RT, with reduced responsive (3.6 min) and recovery (2.7 min) times, good selectivity and reversibility, and long-time stability (150 days) compared with PHI, even superior to others reported at RT. Based on the time-resolved photoluminescence spectra, in situ X-ray photoelectron spectra, and diffuse reflectance infrared Fourier transform spectroscopy results, the resulting sensing performance is attributed to the favorable Z-scheme charge transfer and separation. Moreover, the Ni nodes favorably present in adjacent metal sites between the lamellae contribute to charge transfer and redistribution, whereas Co nodes could act as selective centers for promoted adsorption of NO2. Interestingly, it is confirmed that the CoNiHHTP MOF/PHI heterojunction could effectively reduce the influence of O2 in the gas-sensitive reaction due to their unique bimetallic (Co and Ni) nodes, which is also favorable for the improved sensing performances for NO2. This work provides a feasible strategy to develop promising PHI-based optoelectronic gas sensors at RT.

Adsorption Properties of Dissolved Gas Molecules in Transformer Oil on the ReSe2 Monolayer: A DFT Study

Based on density functional theory, the adsorption behavior of seven typical dissolved gas molecules (CO, CO2, H2, CH4, C2H2, C2H4, and C2H6) and H2O molecule on the ReSe2 monolayer was systematically investigated. The interactions between the ReSe2 monolayer and eight gas molecules were investigated by calculating the adsorption energies, charge transfer, density of states (DOS), and deformation charge density (DCD) for eight different adsorption systems. The gas sensitivity of the ReSe2 monolayer toward these gases was studied using frontier molecular orbital theory and work function analysis. The results demonstrate that compared to other gas molecules, the ReSe2 monolayer exhibits a stronger interaction with CO with an adsorption energy of -1.49 eV. It also displays excellent sensitivity and selectivity toward CO making it a promising candidate for CO gas sensing applications. We aspire that this research will offer theoretical guidance for the development of ReSe2-based gas sensors and contribute to state monitoring technology in oil-immersed power equipment.

Sodium titanate: A proton conduction material for ppb-level NO2 detection with near-zero power consumption

Constrained by the traditional charge transfer sensing mechanism, it is quite challenging to fabricate NO2 sensors that simultaneously exhibit high sensitivity, rapid response/recovery, and low power consumption. Herein, sodium titanate (NTO), a layered material with abundant surface-rooted OH groups (OHR), is demonstrated to be a promising NO2 sensing material. To understand the sensing behavior of NTO, the influences of operating temperature, applied voltage, and relative humidity are investigated, and a novel OHR-enabled proton conduction sensing mechanism is proposed. The sensing process mainly involves selective NO2 adsorption on OHR, thereby lowering the activation energy for proton transportation along the NTO surface. Meanwhile, the moderate intermolecular interaction makes NO2 both easily adsorbed and desorbed at room temperature. Hence, NTO exhibits a highly sensitive, rapid, and fully recoverable response (∼5.7-1 ppm NO2 within 3 s), wide detection range (1 ppb-20 ppm), good stability (>2 months), and near-zero power consumption (0.5 nW). Finally, we demonstrate that NTO has an excellent practical indoor/outdoor NO2 sensing ability. This work offers a new pathway to resolve the inherent conflicts in available NO2 sensors by using NTO via the OHR-enabled proton conduction sensing mechanism, which may also provide insight into designing high-performance sensors for other gases.

Physisorption-Mediated Charge Transfer in TiS2 Nanodiscs: A Room Temperature Sensor for Highly Sensitive and Reversible Carbon Dioxide Detection

Real-time and high-performance monitoring of trace carbon dioxide (CO2) has become a necessity due to its substantial impact on the global climate, human health, indoor occupancy, and crop productivity. Two-dimensional materials such as transition metal dichalcogenides (TMDs) have gained significant interest in gas sensing applications owing to their intrinsically high surface-to-volume ratio. However, the research has been limited to prominent TMDs such as WS2 and MoS2. Specifically, the chemiresistive sensing performance of titanium disulfide (TiS2) has rarely been investigated. We present an electric-field-assisted TiS2 nanodisc assembly for the fabrication of a low-cost, low-power CO2 gas sensor based on charge transfer between physisorbed CO2 analyte molecules and TiS2 nanodiscs operating at room temperature. The physiochemical properties of the synthesized TiS2 nanodiscs were investigated via scanning electron microscopy (SEM), electron diffraction spectroscopy (EDS), transmission electron microscopy (TEM), X-ray diffraction (XRD), and Raman spectroscopy. The fabricated sensor demonstrated an ultra-high sensor response of 60%, a fast response time of 37 s toward 500 ppm CO2 gas, and the lowest detection limit of 5 ppm under ambient conditions. The low adsorption energies and vdW interaction between CO2 molecules and TiS2 resulted in easy desorption, allowing the sensor to self-recover without the need for external stimuli, which is hardly been witnessed in other 2D material analogues. Furthermore, the sensor has excellent reproducibility and stability for successive analyte exposures, as well as excellent selectivity for CO2 over other interfering gases. This reported sensor based on 2D TMDs is the first of its type to integrate such a broad range of sensor characteristics (such as high sensor response and sensitivity, rapid response and recovery times, a high signal-to-noise ratio, and excellent selectivity at room temperature) into a single, revolutionary device for CO2 detection.

Patching sulfur vacancies: A versatile approach for achieving ultrasensitive gas sensors based on transition metal dichalcogenides

Transition metal dichalcogenides (TMDCs) garner significant attention for their potential to create high-performance gas sensors. Despite their favorable properties such as tunable bandgap, high carrier mobility, and large surface-to-volume ratio, the performance of TMDCs devices is compromised by sulfur vacancies, which reduce carrier mobility. To mitigate this issue, we propose a simple and universal approach for patching sulfur vacancies, wherein thiol groups are inserted to repair sulfur vacancies. The sulfur vacancy patching (SVP) approach is applied to fabricate a MoS₂-based gas sensor using mechanical exfoliation and all-dry transfer methods, and the resulting 4-nitrothiophenol (4NTP) repaired molybdenum disulfide (4NTP-MoS₂) is prepared via a sample solution process. Our results show that 4NTP-MoS₂ exhibits higher response (increased by 200 %) to ppb-level NO₂ with shorter response/recovery times (61/82 s) and better selectivity at 25 °C compared to pristine MoS₂. Notably, the limit of detection (LOD) toward NO₂ of 4NTP-MoS₂ is 10 ppb. Kelvin probe force microscopy (KPFM) and density functional theory (DFT) reveal that the improved gas sensing performance is mainly attributed to the 4NTP-induced n-doping effect on MoS₂ and the corresponding increment of surface absorption energy to NO₂. Additionally, our 4NTP-induced SVP approach is universal for enhancing gas sensing properties of other TMDCs, such as MoSe₂, WS₂, and WSe₂.

Dangling bond formation on COF nanosheets for enhancing sensing performances

Dangling bond formation for COF materials in a rational manner is an enormous challenge, especially through post-treatment which is a facile strategy while has not been reported yet. In this work, a "chemical scissor" strategy is proposed for the first time to rationally design dangling bonds in COF materials. It is found that Zn²⁺ coordination in post-metallization of TDCOF can act as an "inducer" which elongates the target bond and facilitates its fracture in hydrolyzation reactions to create dangling bonds. The number of dangling bonds is well-modulated by controlling the post-metallization time. Zn-TDCOF-12 shows one of the highest sensitivities to NO₂ in all reported chemiresistive gas sensing materials operating under visible light and room temperature. This work opens an avenue to rationally design a dangling bond in COF materials, which could increase the active sites and improve the mass transport in COFs to remarkably promote their various chemical applications.

1D and 2D Field Effect Transistors in Gas Sensing: A Comprehensive Review

Rapid progress in the synthesis and fundamental understanding of 1D and 2D materials have solicited the incorporation of these nanomaterials into sensor architectures, especially field effect transistors (FETs), for the monitoring of gas and vapor in environmental, food quality, and healthcare applications. Yet, several challenges have remained unaddressed toward the fabrication of 1D and 2D FET gas sensors for real-field applications, which are related to properties, synthesis, and integration of 1D and 2D materials into the transistor architecture. This review paper encompasses the whole assortment of 1D-i.e., metal oxide semiconductors (MOXs), silicon nanowires (SiNWs), carbon nanotubes (CNTs)-and 2D-i.e., graphene, transition metal dichalcogenides (TMD), phosphorene-materials used in FET gas sensors, critically dissecting how the material synthesis, surface functionalization, and transistor fabrication impact on electrical versus sensing properties of these devices. Eventually, pros and cons of 1D and 2D FETs for gas and vapor sensing applications are discussed, pointing out weakness and highlighting future directions.

Layer-Structured Anisotropic Metal Chalcogenides: Recent Advances in Synthesis, Modulation, and Applications

The unique electronic and catalytic properties emerging from low symmetry anisotropic (1D and 2D) metal chalcogenides (MCs) have generated tremendous interest for use in next generation electronics, optoelectronics, electrochemical energy storage devices, and chemical sensing devices. Despite many proof-of-concept demonstrations so far, the full potential of anisotropic chalcogenides has yet to be investigated. This article provides a comprehensive overview of the recent progress made in the synthesis, mechanistic understanding, property modulation strategies, and applications of the anisotropic chalcogenides. It begins with an introduction to the basic crystal structures, and then the unique physical and chemical properties of 1D and 2D MCs. Controlled synthetic routes for anisotropic MC crystals are summarized with example advances in the solution-phase synthesis, vapor-phase synthesis, and exfoliation. Several important approaches to modulate dimensions, phases, compositions, defects, and heterostructures of anisotropic MCs are discussed. Recent significant advances in applications are highlighted for electronics, optoelectronic devices, catalysts, batteries, supercapacitors, sensing platforms, and thermoelectric devices. The article ends with prospects for future opportunities and challenges to be addressed in the academic research and practical engineering of anisotropic MCs.

Constructing van der Waals heterostructures by dry-transfer assembly for novel optoelectronic device

Since the first successful exfoliation of graphene, the superior physical and chemical properties of two-dimensional (2D) materials, such as atomic thickness, strong in-plane bonding energy and weak inter-layer van der Waals (vdW) force have attracted wide attention. Meanwhile, there is a surge of interest in novel physics which is absent in bulk materials. Thus, vertical stacking of 2D materials could be critical to discover such physics and develop novel optoelectronic applications. Although vdW heterostructures have been grown by chemical vapor deposition, the available choices of materials for stacking is limited and the device yield is yet to be improved. Another approach to build vdW heterostructure relies on wet/dry transfer techniques like stacking Lego bricks. Although previous reviews have surveyed various wet transfer techniques, novel dry transfer techniques have been recently been demonstrated, featuring clean and sharp interfaces, which also gets rid of contamination, wrinkles, bubbles formed during wet transfer. This review summarizes the optimized dry transfer methods, which paves the way towards high-quality 2D material heterostructures with optimized interfaces. Such transfer techniques also lead to new physical phenomena while enable novel optoelectronic applications on artificial vdW heterostructures, which are discussed in the last part of this review.

Gate-Tuned Gas Molecule Sensitivity of a Two-Dimensional Semiconductor

In this work, we develop a gate-tunable gas sensor based on a MoS2/hBN heterostructure field effect transistor. Through experimental measurements and numerical simulations, we systematically reveal a principle that relates the concentration of the target gas and sensing signals (ΔI/I0) as a function of gate bias. Because a linear relationship between ΔI/I0 and the gas concentration guarantees reliable sensor operation, the optimal gate bias condition for linearity was investigated. Taking NO2 and NH3 as target molecules, it is clarified that the bias condition greatly depends on the electron accepting/donating nature of the gas. The effects of the bandgap and polarity of the transition metal dichalcogenides (TMDC) channel are also discussed. In order to achieve linearly increasing signals that are stable with respect to the gas concentration, a sufficiently large VBG within VBG > 0 is required. We expect this work will shed light on a way to precisely design reliable semiconducting gas sensors based on the characteristics of TMDC and target gas molecules.

A Fully Integrated Flexible Tunable Chemical Sensor Based on Gold-Modified Indium Selenide Nanosheets

In this work, a novel light-modulated bifunctional gas sensor based on Au nanoparticles-modified 2D InSe nanosheets was demonstrated. The prepared sensor displayed a reversible and extremely high response for recognition of nitrogen dioxide (NO₂) under visible-light illumination. The sensitivity (1192%) was about 10 times higher than that under dark condition, and the limit of detection (LOD) was 0.17 ppb. In contrast, when sensing ammonia (NH₃), higher sensitivity and selectivity were obtained in darkness rather than in light, with sensitivity and LOD of 11% and 0.2 ppm. Furthermore, the sensor possesses decent stability, repeatability, and anti-interference ability. The tunable sensing behavior with light modulation has been clearly studied with the help of density functional theory. A new principle called "carrier storage box" of Au nanoparticles was proposed to explain the change in surface state of InSe under light modulation. Finally, the prepared sensor has been successfully applied to construct a fully integrated wearable device to measure NH₃ and NO₂ in ambient environment. In all, this work provides a highly competitive gas detection method and paves the way for designing 2D materials-based optoelectronic devices with tunable and multifunctional features.

Direct transformation of ReO3 nanorods into ReS2 nanosheets on carbon fibres for modulating solid-gas interactions

The gas adsorption/desorption reaction that occurs on a solid surface forms the basic reaction of various catalysts and sensor devices. If the phases of various solids can be easily controlled...

Charge transfer driven by redox dye molecules on graphene nanosheets for room-temperature gas sensing

Special functional groups to modify the surface of graphene have received much attention since they enable the charge transfer enhancement, thus realizing gas-sensing at room temperature. In this work, three typical redox dye molecules, methylene blue (MB), indigo carmine (IC) and anthraquinone-2-sulfonate (AQS), were selected to be supramolecularly assembled with reduced graphene oxide (rGO), respectively. Remarkably, three graphene-based materials AQS-rGO (response = 3.2, response time = 400 s), IC-rGO (response = 4.3, response time = 300 s) and MB-rGO (response = 7.1, response time = 100 s) exhibited excellent sensitivity and short response time toward 10 ppm NO₂ at room temperature. The corresponding NO₂ sensing mechanism of the obtained materials was further investigated by cyclic voltammetry (CV) measurements. CV was conducted to measure the anodic peak potential (E_pa) of three redox dyes. Interestingly, it is obvious that the E_pa values were positively correlated with the gas sensitivity and response time of the three materials. To explore the mechanism, UV-vis spectroscopy was adopted to analyze the lowest unoccupied molecular orbitals (LUMOs) of three redox dye molecules. The results show that the oxidation abilities of three redox dyes were also positively correlated with the gas sensitivity and response time of three corresponding graphene-based materials.

Enhanced Selectivity in Volatile Organic Compound Gas Sensors Based on ReS2-FETs under Light-Assisted and Gate-Bias Tunable Operation

Using a single-device two-dimensional (2D) rhenium disulfide (ReS₂) field-effect transistor (FET) with enhanced gas species selectivity by light illumination, we reported a selective and sensitive detection of volatile organic compound (VOC) gases. 2D materials have the advantage of a high surface-area-to-volume ratio for high sensitivity to molecules attached to the surface and tunable carrier concentration through field-effect control from the back-gate of the channel, while keeping the top surface open to the air for chemical sensing. In addition to these advantages, ReS₂ has a direct band gap also in multilayer cases, which sets it apart from other transition-metal dichalcogenides (TMDCs). We take advantage of the effective response of ReS₂ to light illumination to improve the selectivity and gas-sensing efficiency of a ReS₂-FET device. We found that light illumination modulates the drain current response in a ReS₂-FET to adsorbed molecules, and the sensing activity differs depending on the gas species used, such as acetone, ethanol, and methanol. Furthermore, wavelength and carrier density rely on certain variations in light-modulated sensing behaviors for each chemical. The device will distinguish the gas concentration in a mixture of VOCs using the differences induced by light illumination, enhancing the selectivity of the sensor device. Our results shed new light on the sensing technologies for realizing a large-scale sensor network in the Internet-of-Things era.

Ozone-Activated Cataluminescence Sensor System for Dichloroalkanes Based on Silica Nanospheres

The detection and monitoring of dichloroalkanes, which are typical chlorinated volatile organic compounds (CVOCs) with obvious biological toxicity, is of significance for environmental pollution and public health. Herein, a novel ozone-activated cataluminescence (CTL) sensor system based on silica nanospheres was developed for highly sensitive and fast quantification of dichloroalkanes. A typical CTL system coupled with a plasma-ozone-assist unit was designed for promoting the CTL response of dichloroalkanes. The ozone generated by plasma provides a new pathway of catalytic oxidation process, which accompanied by the CTL signal amplification of dichloroalkanes results in an enhanced CTL sensor system with improved limit of detection (1,2-dichloroethane: 0.04 μg mL^-1, 1,2-dichloropropane: 0.03 μg mL^-1) and benign selective performance under the interference of CO₂, H₂O, NO, NO₂, SO₂, CS₂, and other common CVOCs. Moreover, a segmented CTL mechanism including co-adsorption of ozone and dichloroalkanes, thermal elimination, the ozonation route, and a luminous step was ratiocinated based on multiple characterizations and discussion. The proposed methodology and theory open up an attractive perspective for the analysis of less active volatile organic compounds.

Polarization independent and non-reciprocal absorption in multi-layer anisotropic black phosphorus metamaterials

The polarization independent and non-reciprocal absorption is particularly crucial for the realization of non-reciprocal absorption devices. Herein, we proposed and studied the absorption response of two- and three-layer anisotropic black phosphorus (BP) metamaterials by using the finite-difference time-domain (FDTD) simulation and radiation oscillator theory (ROT) analysis. It is shown that, due to unequal surface plasmon resonant modes excited in zigzag (ZZ) and armchair (AC) directions of the anisotropic BP layer, tunable polarization independent and dependent absorption can be achieved for the proposed multi-layer anisotropic BP metamaterials with AC-AC, AC-ZZ, ZZ-AC, AC-AC-φ, AC-ZZ-φ, and ZZ-AC-φ configurations. Especially, the polarization independent absorption also can be realized for odd-layer BP nanostructures. Unlike previous reports, polarization independence only can be achieved in the even-layer BP nanostructure. Moreover, tunable non-reciprocal absorption with the extremely large non-reciprocal degree (NRD) is also found in the case of AC-ZZ and ZZ-AC configurations and AC-ZZ-φ and ZZ-AC-φ configurations. These results may open up the possibility of realizing tunable polarization independent and non-reciprocal plasmonic devices based on 2D materials.

A Photovoltaic Self-Powered Gas Sensor Based on All-Dry Transferred MoS2 /GaSe Heterojunction for ppb-Level NO2 Sensing at Room Temperature

Traditional gas sensors are facing the challenge of low power consumption for future application in smart phones and wireless sensor platforms. To solve this problem, self-powered gas sensors are rapidly developed in recent years. However, all reported self-powered gas sensors are suffering from high limit of detection (LOD) toward NO2 gas. In this work, a photovoltaic self-powered NO2 gas sensor based on n-MoS2 /p-GaSe heterojunction is successfully prepared by mechanical exfoliation and all-dry transfer method. Under 405 nm visible light illumination, the fabricated photovoltaic self-powered gas sensors show a significant response toward ppb-level NO2 with short response and recovery time and high selectivity at room temperature (25 °C). It is worth mentioning that the LOD toward NO2 of this device is 20 ppb, which is the lowest of the reported self-powered room-temperature gas sensors so far. The discussed devices can be used as building blocks to fabricate more functional Internet of things devices.

Room temperature monitoring of SF6decomposition byproduct SO2F2based on TiO2/NiSO4composite nanofibers

Sulfuryl fluoride (SO₂F₂) is one of the ideal decomposition components of sulfur hexafluoride (SF₆), which is widely used as an insulating and arc extinguishing medium in gas-insulated switchgear. To detect the decomposition component of SF₆at room temperature, the use of SO₂F₂is still a challenge. In this work, we have successfully fabricated TiO₂nanofibers and nickel sulfate (NiSO₄NPs) via simple electrospun and hydrothermal methods, followed by calcination process to improve the sensing performance. Metal oxide semiconductor materials (MOSs) are widely used in gas sensing applications due to their superior performance and fast recovery speed. Although the performance of our TiO₂/NiSO₄composite nanofiber sensor decreases at higher temperatures, it shows an excellent response to target gasses at room temperature. Ni-decoration on the outer surface of the nanofibers could maximize the sensing response of 100 ppm SO₂F₂by up to 189% at room temperature, showing that the TiO₂/NiSO₄composite nanofibers are 2.5 times superior to the pure TiO₂nanofiber sensors. Thus, the approach for this novel composite nanofiber-based material is promising for the fabrication of superior gas sensors for decomposition of SF₆.