Inner Filter Effect-Based Sensor for Horseradish Peroxidase and Its Application to Fluorescence Immunoassay

Construction of the fluorescence sensing platform with a bifunctional Cu@MOF nanozyme for determination of alkaline phosphatase and its inhibitor

In this work, a novel and sensitive fluorescence sensing system for alkaline phosphatase (ALP) was constructed using a bifunctional copper metal-organic framework (Cu@MOF) nanozyme, which had excellent oxidase-mimetic activity and fluorescence properties. Owing to the presence of 2-amino-1,4-benzenedicarboxylic acid (1,4-BDC-NH2) ligand, Cu@MOF displays excellent fluorescence performance at 444 nm. Additionally, Cu2+ endows the oxidase-like activity of Cu@MOF, which could trigger p-phenylenediamine (PPD) to be oxidized to a brown product (PPDox) and quench the photoluminescence of Cu@MOF through the inner filtration effect (IFE). As the preferential affinity of ATP for Cu2+, the catalytic activity of Cu@MOF was significantly reduced once ATP was added, thus PPD could not be oxidized and fluorescence was recovered. In the presence of ALP, ATP was hydrolyzed to adenosine and Pi, which allowed Cu@MOF to regain its catalytic activity and continued to catalyze the generation of PPDox. The fluorescence of Cu@MOF was therefore weakened once again. The ALP activity was directly proportional to the degree of decrease in fluorescence intensity. Thus, this novel fluorescence sensing strategy had a linear range of 0.5-60 U/L and the limit of detection was 0.14 U/L. The established sensing method could also be used to for ALP inhibitors screening, and achieved satisfactory results in determining the level of ALP activity in human serum.

Revisiting the catalytic activity of single horseradish peroxidase clusters through electrochemical collision technique: Effect of electrolyte and substrate

Horseradish peroxidase (HRP) is a versatile biosensing label and signal reporter owing to its broad-spectrum catalytic ability. In present work, we characterized HRP's catalytic performance with various substrates using electrochemical collision technique and analyzed the associated electron transfer processes. Different electrolyte solutions greatly affected enzyme dispersibility and zeta potential, thereby impacting HRP collision dynamics in single H2O2 substrate system. The maximum turnover number (kcat) for single HRP molecules was calculated to be 3.611 ± 0.149 × 103 s-1 in 0.85 % NaCl and 2.967 ± 0.286 × 103 s-1 in 0.1 M PBS solution, reflecting differences in cluster size induced by the electrolyte conditions. More severe agglomeration of HRP molecules was observed in double-substrate systems, where the hydrophilic mediator (K4Fe(CN)6) and lipophilic mediator (ABTS) served as electron donors and signal reporters. The calculated kcat value of single HRP molecules in ABTS-H2O2 was 7.6 times higher than that in K4Fe(CN)6-H2O2. This difference is attributed to mediators' solubility, lipophilicity, and HRP's affinity for different substrates, with HRP demonstrated stronger affinity for ABTS-H2O2 substrates, which realized more efficient electron transfer and compensated for the low diffusion coefficient of ABTS. This work provides a comprehensive analysis of the effects of electrolytes and substrates on HRP collision and catalytic behavior, offering valuable insights for the advanced design of HRP-based biosensors and diagnostic platforms.

Fluorescent and colorimetric dual-mode detection of Cu2+ based on carbon dots

A fluorescent and colorimetric dual-mode strategy based on carbon dots (CDs) was rationally designed for sensitive determination of Cu2+. Green fluorescent CDs with high absolute quantum yield of 72.9% were synthesized by facile one-step hydrothermal treatment of triethylenetetramine and Rose Bengal. Cu2+ could trigger the oxidative and chromogenic reaction of p-phenylenediamine (PPD) to generate chromogenic PPDox, accompanied by the fluorescence quenching of the CDs. The quenching mechanism was identified as the inner filter effect between PPDox and CDs. Therefore, a colorimetric/fluorescent dual-mode detection method for Cu2+ recognition was constructed. The limits of detection for Cu2+ were 4.14 μM and 1.28 μM for colorimetric and fluorescent mode, respectively. In addition, this method had achieved satisfactory results in the detection of Cu2+ in real serum samples.

A novel highly sensitive inner filter effect-based fluorescence immunoassay with quantum dots for bioanalysis of zolbetuximab, a monoclonal antibody used for immunotherapy of gastric and gastroesophageal junction adenocarcinoma

Zolbetuximab (ZOL) is a groundbreaking monoclonal antibody targeting CLDN 18.2, a cancer cell surface protein. It is a first-in-class therapy for gastric and gastroesophageal junction adenocarcinoma. However, there is currently any immunoassay available for bioanalysis of ZOL, hindering its pharmacokinetic studies, therapeutic monitoring, and safety profile refinement. To address this gap, this study presents the development and validation of a novel highly sensitive inner filter effect-based fluorescence immunoassay (IFE-FIA) with quantum dots (QDs) as a probe. This assay enables the quantitative determination of ZOL in plasma samples. The assay involved non-competitive capturing of ZOL from the samples using a specific antigen (CLDN 18.2 protein) immobilized on assay plate microwells. A horseradish peroxidase (HRP)-labelled anti-human IgG was used to measure the immune complex. The assay's detection system relies on the formation of a light-absorbing colored product through an HRP-catalyzed oxidative reaction with the substrate 3,3',5,5'-tetramethylbenzidine. This light absorption efficiently quenched the fluorescence of QDs via the IFE. The measured fluorescence signals corresponded to the concentrations of ZOL in the samples. The conditions of the IFE-FIA and its detection system were refined, and the optimum procedures were established. Following the guidelines of immunoassay validation for bioanalysis, the assay was validated, and all the validation criteria were acceptable. The assay demonstrates high sensitivity, accurately quantifying ZOL at concentrations as low as 10 ng/mL in plasma samples, with acceptable precision. Importantly, it avoids interferences from endogenous substances and plasma matrix. The recoveries in spiked human plasma ranged from 96.8 % to 104.5 %, with relative standard deviations of 4.1 %-6.5 %. The proposed IFE-FIA represents a valuable tool for quantifying ZOL in clinical settings, enabling assessment of its pharmacokinetics, therapeutic drug monitoring, and safety profile refinement.

Ratio-fluorescence detection of tert-butylhydroquinone based on non-conjugated polymer dots and gold nanoclusters

A novel ratiometric fluorescent probe based on non-conjugated polymer dots (NCPDs) and gold nanocluster (AuNCs) was constructed to determine tert-butylhydroquinone (TBHQ). The probe exhibited dual emission peaks at 480 nm and 630 nm under 370 nm excitation. The fluorescence of AuNCs was quenched by TBHQ due to strong electrostatic interactions, whereas the emission of NCPDs increased. The ratio of fluorescence intensity at 480 nm to 630 nm (F480 / F630) was monitored as analytical signal response. The probe have been utilized for the detection of TBHQ with good linear relationship in the range of 0.2 to 60 μg/mL. The limit of detection (LOD) and the limit of quantitation (LOQ) were 0.048 μg/mL and 0.159 μg/L, respectively. Three levels of spiked-in TBHQ concentrations were obtained with recovery rates from 80 % to 102 %. The present study provided an effective ratiometric fluorescence method for selective screening of TBHQ in food samples.

Harnessing Bioluminescent Bacteria to Develop an Enzymatic-free Enzyme-linked immunosorbent assay for the Detection of Clinically Relevant Biomarkers

Enzyme-linked immunosorbent assay (ELISA) is the gold standard technique for measuring protein biomarkers due to its high sensitivity, specificity, and throughput. Despite its success, continuous advancements in ELISA and immunoassay formats are crucial to meet evolving global challenges and to address new analytical needs in diverse applications. To expand the capabilities and applications of immunoassays, we introduce a novel ELISA-like assay that we call Bioluminescent-bacteria-linked immunosorbent assay (BBLISA). BBLISA is an enzyme-free assay that utilizes the inner filter effect between the bioluminescent bacteriaAllivibrio fischeriand metallic nanoparticles (gold nanoparticles and gold iridium oxide nanoflowers) as molecular absorbers. Functionalizing these nanoparticles with antibodies induces their accumulation in wells upon binding to molecular targets, forming the classical immune-sandwich complex. Thanks to their ability to adsorb the light emitted by the bacteria, the nanoparticles can suppress the bioluminescence signal, allowing the rapid quantification of the target. To demonstrate the bioanalytical properties of the novel immunoassay platform, as a proof of principle, we detected two clinically relevant biomarkers (human immunoglobulin G and SARS-CoV-2 nucleoprotein) in human serum, achieving the same sensitivity and precision as the classic ELISA. We believe that BBLISA can be a promising alternative to the standard ELISA techniques, offering potential advancements in biomarker detection and analysis by combining nanomaterials with a low-cost, portable bioluminescent platform.

A facile fluorescence microplate immunoassay based on an in situ fluorogenic reaction for the detection of two highly toxic anticoagulant rodenticides in food and biological matrix

Bromadiolone and brodifacoum, the most frequently used anticoagulant rodenticides, are highly toxic and pose a threat to public health by causing food poisoning incidents. Here, we developed a fluorescence microplate immunoassay for facile and sensitive detection of bromadiolone and brodifacoum by introducing three commercial chemicals (p-phenylenediamine, polyethyleneimine, H2O2) as a new substrate of horseradish peroxidase and then generating fluorescence signals based on an in situ fluorogenic reaction (detection time within 75 min). This assay exhibited higher efficiency in generating fluorescence signals, thereby exhibiting a 6-fold improvement in sensitivity compared with colorimetric ELISA. The limit of detection was 0.23-0.28 ng/mL (ng/g) for bromadiolone and 0.34-0.61 ng/mL (ng/g) for brodifacoum in corn and human serum, with recovery ratios higher than 82.3 %. These satisfactory results illustrated our proposed assay was a potential tool for food analysis and poisoning diagnosis caused by bromadiolone and brodifacoum.

Yb-TCPP metal-organic framework as fluorescence sensor for detecting tetracycline in milk

Developing effective means for detecting contamination in milk during production, processing, and storage is both important and challenging. Tetracycline (TC), due to its use in treating animal infections, is among the most prevalent organic pollutants in milk, posing potential and significant threats to human health. However, efficient and in situ monitoring of TC remains lacking. Nevertheless, we have successfully developed a highly sensitive and selective fluorescence method for detecting TC in milk using a metal-organic framework material made from Yb-TCPP (ytterbium-tetra(4-carboxyphenyl)porphyrin). The calculated Stern-Volmer constant (KSV) was 12,310.88 M-1, and the detection limit was 2.44 × 10-6 M, surpassing previous reports. Crucially, Yb-TCPP fluoresces in the near-infrared region, promising its development into a specific fluorescence detection product for practical TC detection in milk, offering potential application value.

Novel dual-emission fluorescence imprinted sensor based on Mg, N-CDs and metal-organic frameworks for rapid and smart detection of 2, 4, 6-trinitrophenol

Rapid and real-time detection of 2, 4, 6-trinitrophenol (TNP) is of great importance for the living environment and human health. Herein, we constructed an innovative ratiometric fluorescence imprinted sensor with fast response and high selectivity based on magnesium and nitrogen co-doped carbon dots (Mg, N-CDs) and chromium telluride quantum dots (r-CdTe) self-assembled in zirconium-based metal organic frameworks (UiO-66) combined with imprinted polymers for the detection of TNP. In the protocol, the introduction of UiO-66 with large specific surface area and porosity using as carrier material significantly enhanced the mass transfer rate, which improved the sensitivity of the Mg, N-CDs/r-CdTe@UiO-66@MIP (LHU@MIP). And the Mg, N-CDs with high quantum yields and r-CdTe were selected as fluorescence emitting elements to yield fluorescence signal, achieving signal amplification. The dual-channel strategy enabled the sensor to not only display a fast fluorescence response, but also generate a dual-response signal under the action of internal filtering effect (IFE). Combining these advantages, the LHU@MIP had a wide linear range (1-100 μM), good detection sensitivity (0.56 μM), and a distinct color change (from blue to pink). Meanwhile, for accurate on-site analysis, we designed a portable smart sensing platform with a color recognizer application. The smartphone enabled visual sensing of TNP by capturing fluorescent images and converting them into digital values. More importantly, the platform was successfully utilized for the analysis of TNP in the simulated actual samples with considerable results. Therefore, the developed platform was characterized by low cost, portability, ideal specificity, and provided a strategy for on-site monitoring of TNP.

Selective oxidation of p-phenylenediamine for blood glucose detection enabled by Se-vacancy-rich TiSe2-x@Au nanozyme

Nanozymes with enzyme-like characteristics have drawn wide interest but the catalytic activity and substrate selectivity of nanozymes still need improvement. Herein, Se-vacancy-rich TiSe2-x@Au nanocomposites are designed and demonstrated as nanozymes. The TiSe2-x@Au nanocomposites show excellent peroxidase-like activity and the chromogenic substrate p-phenylenediamine (PPD) can be selectively oxidized to compounds that exhibit an absorption peak at 413 nm that differs from that of self-oxidation or generally oxidized species, suggesting high catalytic activity and strong substrate selectivity. Theoretical calculations reveal that the PPD adsorption geometry at Se vacancies with an adsorption energy of -3.00 eV shows a unique spatial configuration and charge distribution, thereby inhibiting the free reaction and promoting both the activity and selectivity in PPD oxidation. The TiSe2-x@Au colorimetric system exhibits a wide linear range of 0.015 mM-0.6 mM and a low detection limit of 0.0037 mM in the detection of glucose. The blood glucose detection performance for human serum samples is comparable to that of a commercial glucose meter in the hospital (relative standard deviation < 6%). Our findings demonstrate a new strategy for rapid and accurate detection of blood glucose and our results provide insights into the future design of nanozymes.

Review of the advances in lipid anchors-based biosensors for the isolation and detection of exosomes

Exosomes are nanoparticles with a bilayer lipid structure that carry cargo from their cells of origin. These vesicles are vital to disease diagnosis and therapeutics; however, conventional isolation and detection techniques are generally complicated, time-consuming, and costly, thus hampering the clinical applications of exosomes. Meanwhile, sandwich-structured immunoassays for exosome isolation and detection rely on the specific binding of membrane surface biomarkers, which may be limited by the type and amount of target protein present. Recently, lipid anchors inserted into the membranes of vesicles through hydrophobic interactions have been adopted as a new strategy for extracellular vesicle manipulation. By combining nonspecific and specific binding, the performance of biosensors can be improved variously. This review presents the reaction mechanisms and properties of lipid anchors/probes, as well as advances in the development of biosensors. The combination of signal amplification methods with lipid anchors is discussed in detail to provide insights into the design of convenient and sensitive detection techniques. Finally, the advantages, challenges, and future directions of lipid anchor-based exosome isolation and detection methods are highlighted from the perspectives of research, clinical use, and commercialization.

MOF-Fabric Composites Based on a Multi-Functional MOF as Luminescent Sensors for a Neurotransmitter and an Anti-Cancer Drug

A biocompatible, reliable, fast, and nanomolar-level dual-functional sensor for a neurotransmitter (e.g., adrenaline) and an anti-cancer drug (e.g., 6-mercaptopurine (6-MP)) is still far away from the hand of modern-day researchers. To address this issue, we synthesized an aqua-stable, bio-friendly, thiourea-functionalized Zr(IV) metal-organic framework (MOF) for selective, rapid sensing of adrenaline and 6-MP with ultra-low limit of detection (LOD for adrenaline = 1.9 nM and LOD for 6-MP = 28 pM). This is the first MOF-based fluorescent sensor of both the targeted analytes. The sensor not only can detect adrenaline in HEPES buffer medium but also in different bio-fluids (e.g., human urine and blood serum) and pH media. It also exhibited 6-MP sensing ability in aqueous medium and in various wastewater specimens and pH solutions. For the quick and on-site detection of this neuro-messenger (adrenaline) and the drug (6-MP), cost-effective sensor-coated cotton fabric composites were fabricated. The MOF@cotton fabric composite is capable of detecting both the analytes up to the nanomolar level by the naked eye under UV light. The sensor can be recycled up to five times without significantly losing its efficiency. The Förster resonance energy transfer in the presence of adrenaline and inner-filter effect in the presence of 6-MP are the most likely reasons behind the quenching of the MOF's fluorescence intensity, which were proved with the help of appropriate instrumental techniques.

Dual-modular immunosensor for bongkrekic acid detection using specific monoclonal antibody

Bongkrekic acid (BA) is a mitochondrial toxin that causes high mortality but is often mistakenly categorized as other food poisonings. The immunoassay of BA is still challenging since the specific antibody is unavailable. In this work, a monoclonal antibody specific to BA was first generated and a dual-modular immunosensor for on-site and laboratory detection was established. The antibody showed good affinity (Kd=0.33 μM) and sensitivity (IC₅₀ =17.9 ng/mL in ELISA) with negligible cross-reactivity with common mycotoxins. In dual-modular conditions, fluorescence assay (FA) was conducted based on the inner filter effect of carbon dots (CDs) and oxidized 3,3',5,5'-tetramethylbenzidine (TMB), while the colorimetric assay (CA) was conducted using TMB²⁺-mediated rapid surface etching of gold nanostars (Au NSs). The proposed immunosensor showed good sensitivity and reproducibility to BA in food samples, with a limit of detection lower than 10 ng/mL and recovery ranging from 80.0% to 103.6%, which was in good consistence with that of standard LC-MS/MS. Overall, the proposed immunosensor is an ideal tool for screening BA contaminants in food with good sensitivity and high effectivity.

Simultaneous detection and removal of 2,4,6-trinitrophenyl phenol and dichromate by metal-organic framework

2,4,6-trinitrophenyl phenol (TNP) and dichromate (Cr₂O₇^2-) have serious toxicological effects on environment. Therefore, it is very important to detect and remove TNP and Cr₂O₇^2- in environmental matrix. In this work, a dual-functional UiO type metal-organic framework (Zr-Sti) was synthesized for simultaneous detection and removal of those pollutants in aqueous solution. As for detection, Zr-Sti exhibited sensitive and selective fluorescence response to TNP and Cr₂O₇^2- with detection limit below μM level, and possible mechanism behind was proposed and partially supported by experiment data. In addition, adsorption capacity of the prepared Zr-Sti for TNP and Cr₂O₇^2- was further investigated to evaluate its performance in pollutant removal from aqueous solution, and the mechanism behinds the obtained high removal efficiency was proposed. These results together with the satisfied recovery for simultaneous detection of TNP and Cr₂O₇^2- in real sample, indicate the potential of the prepared Zr-Sti material in the field of environment monitoring and remediation.

MnO4--Triggered Immediate-Stable Real-Time Fluorescence Immunosensor with High Response Speed and Low Steady-State Error

Real-time chemical and biological sensing in vitro is important for application in health and environmental monitoring. Thus, a more rapid and stable detection method is urgently needed. Herein, an immediate-stable real-time fluorescent immunosensor with a high response speed (∼100%, <1 s) and approximately zero steady-state error is constructed. The developed sensor is based on the MnO₄^--triggered in situ immediate-stable fluorogenic reaction between dopamine and orcinol monohydrate to produce azamonardine (DMTM). The obtained DMTM is identified and characterized by high-resolution mass spectrometry, ¹H NMR spectroscopy, ¹³C NMR spectroscopy, and theoretical calculations. The present sensor achieves a highly sensitive detection of dopamine (DA) with a limit of detection (LOD) of 10 nM as well as alkaline phosphates (ALP) with an LOD of 0.1 mU/mL by using orcinol monohydrate phosphate sodium salt as a substrate. As a proof of concept, ALP-triggered fluorescence ELISA using cardiac troponin I (cTnI) as a model antigen target is further constructed. The developed real-time sensor achieves the detection of cTnI with an LOD of 0.05 ng/mL. Moreover, the sensor proposed by us is successfully applied to assess the cTnI level in clinical serum specimens and yields results consistent with those obtained by the commercial ELISA method. The immediate-stable real-time fluorescence immunosensor provides a promising and powerful platform for the trace detection of biomolecules in clinical diagnosis.

Glucose determination in human serum by applying inner filter effect quenching mechanism of upconversion nanoparticles

Accurate blood glucose determination is essential to the clinical diagnosis and management of diabetes. This work establishes an inner filter effect (IFE) strategy between upconversion nanoparticles (UCNPs) and quinone-imine complex for glucose monitoring in human serum simply and efficiently. In this system, the enzyme glucose oxidase (GOx) catalyzes the reaction of glucose into hydrogen peroxide (H₂O₂) and gluconic acid when compulsion by oxygen. In the presence of horseradish peroxidase (HRP), the produced H₂O₂ can catalytically oxidize phenol and 4-amino antipyrine (4-AAP) to generate quinone-imine products. The purple-colored quinone-imine complex effectively absorbed the fluorescence of NaYF₄:Yb³⁺, Er³⁺ UCNPs, leading to the strong fluorescence quenching of UCNPs through IFE. Thus, a new approach was established for glucose monitoring by determining the fluorescence intensity. Under the optimal condition, this approach shows better linearity to glucose from 2-240 μmol/L with a low detection limit at 1.0 μmol/L. Owing to the excellent fluorescence property and background-free interference of the UCNPs, the biosensor was applied for glucose measurements in human serum and got a satisfactory result. Furthermore, this sensitive and selective biosensor revealed great potential for the quantitative analysis of blood glucose or different kinds of H₂O₂-involved biomolecules for the application of clinical diagnosis.

Recent advances of sensing strategies for the detection of β-glucuronidase activity

β-Glucuronidase (β-GLU), a kind of hydrolase, is widely distributed in mammalian tissues, body fluids, and microbiota. Abnormal changes of β-GLU activity are often correlated with the occurrence of diseases and deterioration of water quality. Therefore, detection of β-GLU activity is of great significance in biomedicine and environmental health such as cancer diagnosis and water monitoring. However, the conventional β-GLU activity assay suffers from the limitations of low sensitivity, poor accuracy, and complex procedure. With the development of analytical chemistry, many advances have been made in the detection of β-GLU activity in recent years. The sensors for β-GLU activity detection which have the advantages of rapid and reliable detection have been attracting increased attentions. In this paper, the principles, performances, and limitations of these β-GLU sensors, including colorimetric sensing, fluorescent sensing, electrochemical sensing for the determination of β-GLU activity, have been summarized and discussed. Moreover, the challenges and research trends of β-GLU activity assay are proposed.

Using bimetallic Au/Cu nanoplatelets for construction of facile and label-free inner filter effect-based photoluminescence sensing platform for sarcosine detection

Herein, we report a facile and label-free method for sensitive and specific determination of prostate cancer biomarker sarcosine via using photoluminescent bimetallic Au/Cu nanoplatelets (AuCu NPs) to construct an inner filter effect (IFE)-based photoluminescence (PL) sensing platform. The AuCu NPs were formed by the cysteine-induced co-reduction reaction, which displayed bright PL with an emission peak at 560 nm. Meanwhile, the Cu(I) doping caused a maximum 25-fold enhancement of quantum yield (QY), compared with the native Au(I) complexes, i.e., from 0.85 to 21.5%. By integrating the AuCu NPs with p-phenylenediamine (PPD) oxidation reaction, an IFE-based sensor for sarcosine detection was constructed. In this method, sarcosine is oxidized under the catalysis of sarcosine oxidase (SOx) to yield H₂O₂. The latter further oxidizes PPD to form 2,5-diamino-N,N'-bis(p-aminophenyl)-l,4-benzoquinone di-imine (PPDox) in the presence of horseradish peroxidase (HRP). The UV-vis absorption spectrum of the PPDox can overlap well with the excitation and emission spectra of the AuCu NPs, resulting in the efficient quenching of the AuCu NPs via the IFE effect. Therefore, this IFE-based AuCu NPs/SOx/PPD/HRP sensing platform can be used for highly sensitive and specific sensing of sarcosine. The sensing platform showed two linear regions of the PL intensity of the AuCu NPs versus the concentration of sarcosine in the range of 0.5-5 μM and 5-100 μM with a detection limit (LOD) of 0.12 μM (S/N = 3). Furthermore, this IFE-based sensing platform could be developed into a paper-based biosensor for simple, instrument-free, and visual detection of sarcosine.

Fluorescent polydopamine based molecularly imprinted sensor for ultrafast and selective detection of p-nitrophenol in drinking water

A highly effective fluorescent molecularly imprinted sensor (F-PDA-MIS) based on fluorescent polydopamine (F-PDA) was successfully synthesized for selective and ultrafast detection of p-nitrophenol (P-NP) in drinking water. F-PDA with abundant surface functional groups has been artfully modified to firstly serve as both fluorescent monomer and functional monomer in the synthesis of a uniform luminous F-PDA-MIS, which can greatly improve the detection efficiency. As expected, F-PDA-MIS had an obvious emission wavelength of 535 nm with the optimal excitation wavelength at 400 nm. Specially, F-PDA-MIS could detect P-NP in the range 100 to 1100 nM with much lower detection limit of 24.2 nM within 120 s compared with other conventional imprinted fluorescent sensors based on pure quantum dots (QDs) or dyes. This excellent test phenomenon is mainly ascribed to the rapid electron transfer between F-PDA and P-NP. Satisfactory recovery of 98.0-104% for mineral water and 98.6-106% for boiling water were obtained with relative standard deviations (RSDs) of 2.7-3.4% and 2.6-3.5% respectively. The detection reliability of F-PDA-MIS was verified by the comparison with high-performance liquid chromatography (HPLC-UV). Consequently, F-PDA as a fluorescence functional monomer has been shown to be a possible strategy to effectively improve the detection limit and shorten response time of the target determination in water..

Novel detection method for gallic acid: A water soluble boronic acid-based fluorescent sensor with double recognition sites

As one of the widespread phenols in nature, gallic acid (GA) has attracted a subject of attention due to its extensive biological properties. It is very important and significant to develop a sensitive and selective gallic acid sensor. In recent years, owing to their reversible covalent binding with Lewis bases and polyols, boronic acid compounds have been widely reported as fluorescence sensors for the identification of carbohydrates, ions and hydrogen peroxide, etc. However, boronic acid sensors for specific recognition of gallic acid have not been reported. Herein, a novel water-soluble boronic acid sensor with double recognition sites is reported. When the concentration of gallic acid added was 1.1 × 10^-4 M, the fluorescence intensity of sensor 9b decreased by 80%, followed by pyrogallic acid and dopamine. However, the fluorescence of the sensor 9b combined with other analytes such as ATP, sialic acid, and uridine was basically unchanged, indicating that the sensor 9b had no ability to recognize these analytes. Also, sensor 9b has a fast response time to gallic acid at room temperature, and has a high binding constant (12355.9 ± 156.89 M^-1) and low LOD (7.30 × 10^-7 M). Moreover, gallic acid content of real samples was also determined, and the results showed that this method has a higher recovery rate. Therefore, sensor 9b can be used as a potential tool for detecting biologically significant gallic acid in actual samples such as food, medicine, and environmental analysis samples.

Fluorescent Carbon Dots as Biosensor, Green Reductant, and Biomarker

Carbon dots, the celebrated green material among the nanocarbon family, are blessed with several interesting features like biocompatibility, solubility, tunable luminescence, and so forth. Herein, carbon dots derived from Mint leaf extract (M-CDs) via a green method are exploited for versatile applications as a biosensor, reductant, and biomarker. M-CDs are applied for fluorimetric sensing of biologically relevant folic acid through quenching response originating from the inner filter effect, with a limit of detection of 280 nM. The carbon dots were highly selective toward folic acid in a collection of 16 biomolecules. The specificity of carbon dots toward folic acid is explained based on the interaction between the two. Along with sensing, herein, we project M-CDs as a green reducing agent by demonstrating the reduction of Fe(III) and noble metal nanoparticle synthesis from their salt solutions. The particles are found to be significantly non-cytotoxic, as evident from the MTT assay performed on primary H8 cells. The application of M-CDs in multicolor imaging is also illustrated using HeLa cells.

Mixed matrix membranes containing fluorescent coordination polymers for detecting Cr2O72- with high sensitivity, stability and recyclability

Three coordination polymers (CPs) were synthesized by using CdII, fluorescent 9,10-di(4-pyridyl)anthracene (dpa), and cyclohexane-1,4-dicarboxylic acid (H2cda), and they are [Cd2(dpa)2(cda)Cl2]n (1), [Cd(dpa)2(cda)]n (2) and [Cd(dpa)(cda)(H2O)]n (3). Both 1 and 2 are fluorescent and contain nonporous layers. 3 is an isomer of 2 and contains a porous diamondoid network. Fluorescent mixed matrix membranes were prepared by dispersing the particles of 1 or 2 within the matrix of polymethyl methacrylate, and showed high sensitivity and selectivity for detecting Cr2O72- in water. Both stability and recyclability of the MMMs were remarkably higher than those of the CP powders.

Fluorescent nanocomposites based on gold nanoclusters for metal ion detection and white light emitting diodes

Gold nanoclusters (AuNCs) are among the most promising organic-inorganic hybrid luminescent materials for various applications. The current development of AuNCs majorly focuses on controlling their luminescence properties. Herein, we report a new strategy to facilely construct two different nanocomposites featuring enhanced photoluminescence based on mercaptopropionic acid-protected AuNCs (MPA-AuNCs). Through co-assembly with Zn2+ and 2-methylimidazole (2M-IM), the weak luminescence of MPA-AuNCs evolved into either intense blue-green or orange emission at different concentration ratios of additives. HR-TEM and spectroscopic characterization studies revealed that the intense blue-green emission was ascribed to the formation of ZnS quantum dots (QDs) on the outer surface of AuNCs (AuNCs@ZnS), while the strong orange emission originated from the primitive MPA-AuNC core encapsulated by a cubic ZIF-8 shell (AuNCs@ZIF-8). The AuNCs@ZnS nanocomposite was further applied as an exceptional chemical sensor for selective detection of Pb2+ and Fe3+via different quenching mechanisms, and the AuNCs@ZIF-8 composite was applied for fabricating light-converting devices. The co-assembly of AuNCs with Zn2+ and imidazole derivatives provides a facile strategy for acquiring differentiated nanomaterials that have versatile potential applications in chemical detection and light-converting devices.

Ratiometric determination of Cr(VI) based on a dual-emission fluorescent nanoprobe using carbon quantum dots and a smartphone app

A simple dual-colour fluorescent nanoprobe has been designed composed of blue and yellow emission carbon quantum dots (CQDs). This system is inexpensive and easy to operate and was successfully employed for on-site measurements based on a smartphone app. The designed nanoprobe exhibited increased selectivity for Cr(VI), leading to a double stable response of the two CQDs. The dual-emission nanoprobe showed blue-violet fluorescence upon UV irradiation, and the fluorescent emission peaks were located at 418 nm and 552 nm. The blue light emission of CQDs was quenched with increasing Cr(VI) concentration due to the inner filter effect, whereas the yellow light emission was enhanced due to the aggregation-induced emission effect. The different responses of the dual emissions to Cr(VI) resulted in a fluorescent colour variation, thus enabling facile macroscopic visualization. With a smartphone, the change in the fluorescence colour could be observed more apparently than that of a single fluorescence nanoprobe, and the response increased linearly so that the nanoprobe could be applied to instantaneous measurements. Furthermore, the dual-emission nanoprobe was successfully employed for analysing food and water samples. Accurate concentrations were obtained by constructing a calibration plot using a fluorescence spectrometer and a smartphone app; the recoveries were 81.6% to 107.7%, and the relative standard deviation was below 3.6%. Therefore, this smartphone-integrated dual-emission detection system is promising as a new portable method for the on-site measurement of Cr(VI) ions. * Y-CQDs: yellow emission carbon quantum dots. B-CQDs: blue emission carbon quantum dots. B/Y-CQDs: a mixture of B-CQDs and Y-CQDs.

Upconversion luminescence detection of ascorbic acid based on NaGdF4:Yb,Er@NaYF4 nanoparticles and oxidase-like CoOOH nanoflakes

In this work, we developed a simple and selective luminescence sensing system for detecting ascorbic acid (AA) based on NaGdF₄:Yb,Er@NaYF₄ upconversion nanoparticles (UCNPs) and oxidase-like CoOOH nanoflakes. When p-phenylenediamine (PPD) and oxidase-like CoOOH nanoflakes were added to the UCNPs solutions, PPD, as a typical substrate of oxidase, could be oxidized to PPDox. The luminescence intensity of UCNPs was quenched because PPDox could play a role as an energy acceptor. When AA was added to the above solution mixture, the CoOOH nanoflakes were destroyed, and then, the luminescence intensity was recovered. Under the best experimental conditions, the linear range for detection of AA was 0.8 to 280 μM, and the detection limit was 0.25 μM. Furthermore, the system could be applied to real sample analysis with satisfactory results.

Amino group decorated coordination polymers for enhanced detection of folic acid

A series of fluorescent coordination polymers (CPs) {[Cd₂(CH₃-bpeb)₂(BDC)₂] CP1, (BDC)_0.5/(NH₂-BDC)_0.5-CP1, (BDC)_0.34/(NH₂-BDC)_0.66-CP1, (BDC)_0.25/(NH₂-BDC)_0.75-CP1, (BDC)_0.2/(NH₂-BDC)_0.8-CP1, (NH₂-BDC)-CP1} were prepared from conjugated ligand 4,4'-((2-methyl-1,4-phenylene)bis(ethene-2,1-diyl))bipyridine (CH₃-bpeb), terephthalic acid (BDC), aminoterephthalic acid (NH₂-BDC) and CdSO₄ under solvothermal conditions. The fluorescence of aqueous suspensions of these CPs was quenched by folic acid (FA) in a concentration dependent manner. The efficiency of quenching increasing with an increased proportion of NH₂-BDC ligand in the CP with (NH₂-BDC)-CP1 exhibiting a low detection limit of 1.7 × 10^-7 M.

A label-free multifunctional nanosensor based on N-doped carbon nanodots for vitamin B12 and Co2+ detection, and bioimaging in living cells and zebrafish

Multifunctional N-doped carbon nanodots (N-CNDs) with a fluorescence (FL) quantum yield (QY) of 13.6% have been synthesized via a facile one-step hydrothermal process using Artemisia annua and 1,2-ethylenediamine as precursors. As-prepared N-CNDs showed excellent FL properties and were developed as a multifunctional sensing platform for vitamin B₁₂ (VB₁₂) and Co²⁺ determination, and bioimaging in living cells and zebrafish. The FL of N-CNDs is quenched efficiently in the presence of VB₁₂ on the basis of the inner filter effect (IFE) or Co²⁺ by static quenching, respectively. EDTA as a masking agent enables Co²⁺ to be effectively eliminated and N-CNDs were used to selectively detect VB₁₂ in the presence of both VB₁₂ and Co²⁺. The present FL nanosensor can detect VB₁₂ and Co²⁺ in the linear ranges of 0.5-35 μM and 2.5-25 μM with the corresponding detection limits of 47.4 nM and 230.5 nM, respectively. The study proved that the determination of Co²⁺ was based on the static quenching to form a complex between the amino group of N-CNDs and Co²⁺. Inspired by these outstanding properties, practical applications of this nanosensor for the detection of VB₁₂ in actual samples (human serum, egg yolk, VB₁₂ tablets and VB₁₂ injection) and Co²⁺ in water samples were further verified with satisfactory results. The as-constructed N-CNDs have negligible toxicity and good biocompatibility, which facilitates utilization of N-CNDs in bioimaging of A549 cells and zebrafish, and sensing VB₁₂ in living cells.

Ratiometric fluorescent nanoprobes based on Resonance Rayleigh Scattering and inner filter effect for detecting alizarin red and Pb2

A new ratiometric fluorescent strategy for detection of alizarin red (ARS) was designed based on the fluorescence of CDs and scattered light of scatterer. The CDs-ARS system can be used to detect Pb²⁺ based on that the complexation between ARS and Pb²⁺. With the addition of ARS, the fluorescence of CDs was apparently quenched via inner filter effect (IFE). Resonance Rayleigh Scattering (RRS) at 350 nm was enhanced by an increase in the number of scatterer. The value of ln(I₃₅₀/I₄₂₅) was linearly correlated with ARS concentration in the range of 0-80 μM, and the detection limit for ARS was calculated to be 68.1 nM. When Pb²⁺ was added to the CDs-ARS system, the complexation of ARS with Pb²⁺ increased the size of the scatterer, resulting in the increase of the RRS intensity at 350 nm. Due to the affinity between ARS and Pb²⁺, the overlap of the emission spectra of CDs and the absorption spectra of ARS was reduced, resulting in the IFE effect was inhibited and the recovery of the fluorescence of CDs. The value of I₃₅₀/I₄₂₅ linearly increased with the addition of Pb²⁺ within the range of 10-50 μM, the limit of detection was 36.8 nM. As for practical application, CDs and CDs-ARS were applied to detect ARS and Pb²⁺ in tap water and poor water, respectively. The recovery values were obtained to be 95.4-98.8% and 93.4-101.7%. Furthermore, the system of CDs-ARS has been successfully applied to H1299 cell imaging.

A nature-inspired colorimetric and fluorescent dual-modal biosensor for exosomes detection

As non-invasive biomarkers, exosomes are of great significance to diseases diagnosis. However, sensitive and accurate detection of exosomes still remains technical challenges. Herein, inspired by nature's "one-to-many" concept, we design a biosensor mimicking the cactus with numerous thorns to detect exosomes. The biosensor is composed of CD63 antibodies, resembling the roots of cactus, to capture exosomes, and the exosomes resemble the stems. Cholesterol-labeled DNA (DNA anchor) binding to streptavidin modified horseradish peroxidase (HRP) can insert into exosomes membrane, which seems the thorns. The readout signal is produced through HRP-catalyzed hydrogen peroxide (H₂O₂) mediated oxidation of 1,4-phenylenediamine (PPD) to form 2,5-diamino-NN'-bis-(p-aminophenyl)-1,4-benzoquinone di-imine (PPDox). The PPDox can quench fluorescence of fluorescein through inner filter effect (IFE), which provides fluorescent signal for exosomes detection. Based on this principle, the obtained exosomes solution is qualitatively and quantitatively analyzed by our biosensor, with the comparison to current standard methods by nanoparticle tracking analysis (NTA) and commercial enzyme-linked immunosorbent assay (ELISA) kit. The linear range is from 1.0 × 10⁴ to 5.0 × 10⁵ particles μL^-1 with the limit of detection 3.40 × 10³ particles μL^-1 and 3.12 × 10³ particles μL^-1 for colorimetric and fluorescent assays, respectively. Meanwhile, our biosensor exhibits good selectivity, and can eliminate the interference from proteins. This dual-modal biosensor shows favorable performance towards analytical application in clinic samples, pushing one step further towards practical clinical use.

Homogeneous photoelectrochemical biosensing via synergy of G-quadruplex/hemin catalysed reactions and the inner filter effect

We develop a label-free homogeneous photoelectrochemical biosensing strategy for microRNA quantification based on the synergy of G-quadruplex/hemin catalyzed electron donor consumption and the inner filter effect.

A Janus-inspired amphichromatic system that kills two birds with one stone for operating a "DNA Janus Logic Pair" (DJLP) library

Although DNA computing has exhibited a magical power across diverse areas, current DNA logic gates with different functions are always separately operated and can only produce hard-to-visualize output. The fussy/obligatory gates' redesign/reconstruction and the non-intuitive output cause the wastage of time and costs, low efficiency and practicality. Herein, inspired by the ancient Roman mythical God Janus, for the first time, we propose the concept of "DNA Janus Logic Pair" (DJLP) to classify the DNA logic gates with contrary functions into "Positive + Negative" gates (DJLP = Pos + Neg). Based on the biocatalytic property of G-quadruplex DNAzyme (G4zyme) and the luminescence quenching ability of oxidized 3,3',5,5'-tetramethylbenzidine (OxTMB) towards the upconversion (UC) particles, we fabricated a universal amphichromatic platform that kills two birds with one stone for operating a versatile DJLP library. Different from the previous DNA logic systems, the "Pos + Neg" gates of each DJLP in this study were concomitantly achieved via the same one-time DNA reaction, which avoided the gates' redesign/reoperation and reduced the operating costs/time of the DNA gates by at least half. Besides, both the amphichromatic outputs (Visual-blue and UC luminescent-green) can be visualized under harmless-NIR, thus bringing greatly enhanced practicality to the method. Moreover, we constructed various concatenated logic circuits via logically modulating the G4zyme's biocatalytic property with glutathione, thus enabling the largely improved computing complexity. Furthermore, taking the circuit "YES-INH-1-2 decoder" as the "computing core", we designed an "antioxidant indicator" with ratiometric logical responses that could recognize the presence of antioxidants smartly (output changed from "10" to "01"), which provided a typical prototype for potential intelligent bio-applications.

A Ratiometric Fluorescent DNA Radar Based on Contrary Response of DNA/Silver Nanoclusters and G-Quadruplex/Crystal Violet

G-quadruplex (G4) exhibits infinite application foreground due to its special properties and critical roles in biological regulation. A DNA radar was first built by assigning the silver nanocluster (AgNC) as the radar transmitter, the middle single strand DNA-bridge connected on the AgNCs as the electromagnetic wave, and the G4/crystal violet complex as the radar antenna. The radar antenna could receive the signal of the target DNA that met the electromagnetic wave and give a location via light-up fluorescence. Here, G4 is chosen as the suitable template to connect potential nanomaterial AgNCs with the G4 binder (crystal violet, CV) since the rich guanine in G4 could not only enhance the fluorescence of AgNCs but also form quartets offering powerful binding sites for the G4 binder. Meanwhile, the hybridization behavior of the middle single strand-bridge produced contrary effects decreasing the fluorescence of AgNCs and increasing the fluorescence of G4/CV, which vests a ratiometric feature in such DNA radar. Additionally, this DNA radar model could realize a cascade of logic circuits, the construction of a 1-to-2 decoder, and the ratiometric detection of target DNA. This system could also be employed for DNA detection in a biological matrix, which could be potentially usable as a unique means for monitoring the pathological process of disease, and lays the foundation for the future treatment of diseases.

InP/ZnS quantum dot-based fluorescent probe for directly sensitive and selective detection of horseradish peroxidase

InP/ZnS quantum dot (QD)-based fluorescent probe for directly sensitive and selective detection of horseradish peroxidase (HRP) was reported herein. Fluorescence of InP/ZnS QDs was statically quenched by HRP, due to the ground state complex formation of InP/ZnS QDs with HRP. Such ground state complex formation between InP/ZnS QDs and HRP reduced both the α-helix content and the melting temperature of HRP. Several key factors including InP/ZnS QDs concentration, buffer pH value, ionic strength, reaction temperature, and reaction time those affected the analytical performance of InP/ZnS QDs in HRP determination were investigated thoroughly. Under the optimal conditions, fluorescence intensity of InP/ZnS QDs was linearly decreased with the increasing of HRP concentration during the range of 1.0 × 10^-9 M ∼ 3.0 × 10^-8 M (0.01 U ml^-1 ∼ 0.3 U ml^-1) with the detection limit as low as 1.2 × 10^-10 M (1.2 mU ml^-1). The present method showed excellent selectivity for HRP over some amino acids, nucleotides, and common proteins. This method was utilized to detect HRP in synthetic samples successfully.

A novel and sensitive fluorescent assay for artemisinin with graphene quantum dots based on inner filter effect

The authors describe a novel method for the determination of artemisinin (ART) by using graphene quantum dots (GQDs) as the fluorescent probes. This method is based on the fact that ART can react with p-aminophenylboronic acid (p-ABA) to produce p-aminophenol (p-AP). While in the presence of tyrosinase (TYR), p-AP can be oxidized into 4-amino-1,2-benzoquinone, which effectively quenched the fluorescence of GQDs due to the inner filter effect (IFE). By making use of these reactions, a novel and sensitive fluorescent assay for ART has been developed. The calibration curve for the determination of ART is linear in the range of 0.1-5 μM and 5-55 μM with the detection limit of 33 nM, which is more sensitive than most of other methods. Some common coexisting substances including Ca²⁺, Na⁺, Mg²⁺, K⁺, PO₄^3-, starch, lactose, dextrin, and magnesium stearat have negligible effects on the fluorescence intensity of GQDs-TYR-p-ABA system. Finally, the sensing system was successfully applied to the detection of the compound naphthoquine phosphate tablet samples with satisfactory recoveries. This IFE-based GQDs fluorescence sensing strategy is facile and sensitive for the determination of ART because neither the surface modification nor the linking between the receptor and the fluorophore is required.

pH-mediated reversible fluorescence nanoswitch based on inner filter effect induced fluorescence quenching for selective and visual detection of 4-nitrophenol

Being a common hazardous waste, 4-nitrophenol (4-NP) has caused a serious threat to humans and environment. Therefore, rapid and selective detection of 4-NP, especially using a simple and portable instrument, is highly desired for human health and environmental monitoring. Herein, we develop a novel pH-mediated reversible fluorescence nanoswitch for selectively detecting 4-NP by using water-soluble fluorescent polymer carbon dots (PCDs) as a probe. The fluorescence of PCDs can be quenched by 4-NP via inner filter effect (IFE) because its excitation spectrum well overlaps with the absorption spectrum of 4-NP under alkaline condition. However, an obvious blue shift of the absorption peak of 4-NP occurs under acidic condition, causing the fluorescence recovery of PCDs due to the disappearance of IFE. On the basis of this principle, a pH-mediated reversible fluorescence nanoswitch was constructed and a broad linear range was obtained from 0.5 to 60 μM with a detection limit of 0.26 μM for 4-NP. Furthermore, this approach was successfully applied to detect 4-NP in real water samples and a portable polyamide film-based sensor was developed for visual detection of 4-NP, which offers a promising platform for the detection of 4-NP in on-site and resource-poor settings.

A recyclable post-synthetically modified Al(iii) based metal–organic framework for fast and selective fluorogenic recognition of bilirubin in human biofluids

The ultra-fast, highly sensitive and selective sensing features of bilirubin in human biofluids by a post-synthetically modified Al(iii) MOF are presented.