Thermoresponsive nanohydrogels cross-linked by gold nanoparticles

Polymer Brushes and Surface Nanostructures: Molecular Design, Precise Synthesis, and Self-Assembly

For over two decades, polymer brushes have found wide applications in industry and scientific research. Now, polymer brush research has been a significant research focus in the community of polymer science. In this review paper, we give an introduction to the synthesis, self-assembly, and applications of one-dimensional (1D) polymer brushes on polymer backbones, two-dimensional (2D) polymer brushes on flat surfaces, and three-dimensional (3D) polymer brushes on spherical particles. Examples of the synthesis of polymer brushes on different substrates are provided. Studies on the formation of the surface nanostructures on solid surfaces are also reviewed in this article. Multicomponent polymer brushes on solid surfaces are able to self-assemble into surface micelles (s-micelles). If the s-micelles are linked to the substrates through cleavable linkages, the s-micelles can be cleaved from the substrates, and the cleaved s-micelles are able to self-assemble into hierarchical structures. The formation of the surface nanostructures by coassembly of polymer brushes and "free" polymer chains (coassembly approach) or polymerization-induced surface self-assembly approach, is discussed. The applications of the polymer brushes in colloid and biomedical science are summarized. Finally, perspectives on the development of polymer brushes are offered in this article.

Amino acid modified OCMC-g-Suc-β-CD nanohydrogels carrying lapatinib and ginsenoside Rg1 exhibit high anticancer activity in a zebrafish model

Nanohydrogels show great potential as efficient drug carriers due to their biocompatibility, low toxicity, and high water absorbability. In this paper, we prepared two O-carboxymethylated chitosan (OCMC)-based polymers functionalized with β-cyclodextrin (β-CD) and amino acid. The structures of the polymers were characterized by Fourier Transform Infrared (FTIR) Spectroscopy. Morphological study was carried out on a Transmission Electron Microscope (TEM), and the results indicated that the two polymers had irregular spheroidal structure with some pores distributed on their surface. The average particle diameter was below 500 nm, and the zeta potential was above +30 mV. The two polymers were further used for preparing nanohydrogels loaded with anticancer drugs lapatinib and ginsenoside Rg1, and the resulting nanohydrogels showed high drug loading efficiency and pH-sensitive (pH = 4.5) drug release behavior. In vitro cytotoxicity investigation revealed that the nanohydrogels exhibited high cytotoxicity against lung cancer (A549) cells. In vivo anticancer investigation was performed in a transgenic Tg(fabp10:rtTA2s-M2; TRE2:EGFP-kras ^V12) zebrafish model. The results showed that the synthesized nanohydrogels significantly inhibited the expression of EGFP-kras ^v12 oncogene in zebrafish liver, and the L-arginine modified OCMC-g-Suc-β-CD nanohydrogels loading lapatinib and ginsenoside Rg1 showed the best results.

Polymer brush-based nanostructures: from surface self-assembly to surface co-assembly

Surface structures play an important role in the practical applications of materials. The synthesis of polymer brushes on a solid surface has emerged as an effective tool for tuning surface properties. The fabrication of polymer brush-based surface nanostructures has greatly facilitated the development of materials with unique surface properties. In this review article, synthetic methods used in the synthesis of polymer brushes, and self-assembly approaches applied in the fabrication of surface nanostructures including self-assembly of polymer brushes, co-assembly of polymer brushes and "free" block copolymer chains, and polymerization induced surface self-assembly, are reviewed. It is demonstrated that polymer brush-based surface nanostructures, including spherical surface micelles, wormlike surface structures, layered structures and surface vesicles, can be fabricated. Meanwhile, the challenges in the synthesis and applications of the surface nanostructures are discussed. This review is expected to be helpful for understanding the principles, methods and applications of polymer brush-based surface nanostructures.

A hybrid thermoresponsive plasmonic nanogel designed for NIR-mediated chemotherapy

Temperature-trigger chemotherapy is one of the state-of-the-art anti-tumoral strategies in nanomedicine. However, this strategy is in close relationship with the effect of the temperature in the tumor tissue. With high temperatures, the ablation of the tumor tissue can hinder a correct chemotherapy approximation. On the other hand, with moderate temperatures a negative vascularization that promotes the tumor growing is produced and competes with the chemotherapeutic effects. We have constructed one nanogel system composed of a thermoresponsive polymer cross-linked by plasmonic gold nanoparticles (AuNPs) for temperature-trigger chemotherapy. Doxorubicin loaded in the porous interior of the nanogel is released when the thermoresponsive network of the nanogel collapses due to the heat generated by the AuNPs upon near infra-red light irradiation. The hybrid nanogel system has been tested in vitro and in vivo, where it was observed that the temperatures reached in the in vivo NIR irradiation have an undesired effect on the inhibition of the tumor growth while the drug loaded systems considerably reduced the tumor sizes. This study shows the importance of design in temperature triggered antitumoral systems, where lower temperatures usually reached in practical situations due to light attenuation produced by the tissue can be positively utilized for enhancing the antitumoral effect of loaded drugs in the system.

Advances in the application of gold nanoparticles in bone tissue engineering

The materials used in bone tissue engineering (BTE) have been advancing with each passing day. With the continuous development of nanomedicine, gold nanoparticles (GNPs), which are easy to be synthesized and functionalized, have attracted increasing attention. Recent years have witnessed this amazing material, i.e., GNPs characterized with large surface area to volume ratio, biocompatibility, medical imaging property, hypotoxicity, translocation into the cells, high reactivity, and other properties, perform distinct functions in BTE. However, the low stability of GNPs in the biotic environment makes them in the requirements of modification or recombination before being used. After being combined with the advantages of other materials, the structures of GNPs have exhibited great potential in stem cells, scaffolds, delivery systems, medical imaging, and other aspects. This review will focus on the advances in the application of GNPs after modification or recombination with other materials to BTE.

Optical Properties of Reconfigurable Polymer/Silver Nanoprism Hybrids: Tunable Color and Infrared Scattering Contrast

We synthesize and characterize stimulus-responsive nanocomposites consisting of poly( N-isopropylacrylamide) (PNIPAM) with controlled loadings of anisotropic plate-like silver nanoprisms. These composites show strong, reversible switching of their optical extinction and scattering properties in response to temperature cycling. We use UV-vis-NIR spectroscopy and dynamic light scattering to characterize the hybrids and show that the loading density of the silver nanoprisms in the polymer and the size of the nanoprisms are both factors that can be used to tailor the optical response of the composites, extending the range of colors beyond that previously reported with PNIPAM/plasmonic nanoparticle composites. These PNIPAM/silver nanoprism hybrids exhibit thermochromic shifts that are 5-10 times larger than those typically reported for similar structures of PNIPAM composites with silver nanoparticles of a comparable range of loading density. In addition, we show that these composites can exhibit very large ratiometric changes in scattering in the NIR, which could open applications for related materials in thermal management and NIR labeling and taggants.

Thermally Triggered in Situ Assembly of Gold Nanoparticles for Cancer Multimodal Imaging and Photothermal Therapy

The assembly of gold nanoparticles (AuNPs) to AuNP assemblies is of interest for cancer therapy and imaging. Herein we introduce a new and general paradigm, thermally triggered AuNP assembly, for the development of novel intelligent platforms for cancer photothermal therapy (PTT) and multimodal imaging. Site-specific conjugation of a thermally sensitive elastin-like polypeptide (ELP) to AuNPs yields thermally sensitive ELP-AuNPs. Interestingly, ELP-AuNPs can in situ form AuNP assemblies composed of short necklace-like gold nanostructures at elevated temperatures and thus show strong near-infrared light absorption and high photothermal effect. These thermally responsive properties of ELP-AuNPs enable simultaneous photothermal/photoacoustic/X-ray computed tomographic imaging and PTT of melanoma after single intratumoral injection of ELP-AuNPs. The thermally triggered assembly of a variety of nanoparticles with optical, electronic, and magnetic properties into nanoparticle assemblies may open new ways for the establishment of intelligent platforms for various applications in biomedicine.

Stimuli-responsive nanogel composites and their application in nanomedicine

Nanogels are nanosized crosslinked polymer networks capable of absorbing large quantities of water. Specifically, smart nanogels are interesting because of their ability to respond to biomedically relevant changes like pH, temperature, etc. In the last few decades, hybrid nanogels or composites have been developed to overcome the ever increasing demand for new materials in this field. In this context, a hybrid refers to nanogels combined with different polymers and/or with nanoparticles such as plasmonic, magnetic, and carbonaceous nanoparticles, among others. Research activities are focused nowadays on using multifunctional hybrid nanogels in nanomedicine, not only as drug carriers but also as imaging and theranostic agents. In this review, we will describe nanogels, particularly in the form of composites or hybrids applied in nanomedicine.

Hydrogels 2.0: improved properties with nanomaterial composites for biomedical applications

The incorporation of nanomaterials in hydrogels (hydrated networks of crosslinked polymers) has emerged as a useful method for generating biomaterials with tailored functionality. With the available engineering approaches it is becoming much easier to fabricate nanocomposite hydrogels that display improved performance across an array of electrical, mechanical, and biological properties. In this review, we discuss the fundamental aspects of these materials as well as recent developments that have enabled their application. Specifically, we highlight synthesis and fabrication, and the choice of nanomaterials for multifunctionality as ways to overcome current material property limitations. In addition, we review the use of nanocomposite hydrogels within the framework of biomedical and pharmaceutical disciplines.

Multifunctional hybrid nanogels for theranostic applications

This paper reviews a wide set of theranostic applications based on the special properties associated with composite nanogels. The nanogels presented here are mostly hybridized with quantum dots, magnetic nanoparticles, and plasmonic metal noble nanoparticles. These inorganic components confer nanogels multifunctional properties that extend their applications from drug delivery systems to diagnosis and therapy. Nanogels can also be surface functionalized with specific ligands to achieve targeted therapy and reduce toxicity. This versatility makes hybrid nanogels very promising agents for imaging, diagnosis and treatment of cancer and other diseases.

Thermosensitive mixed shell polymeric micelles decorated with gold nanoparticles at the outmost surface: tunable surface plasmon resonance and enhanced catalytic properties with excellent colloidal stability

Gold NPs are coupled to the outermost surface of mixed shell polymeric micelles with a PEG/PNIPAM shell, exhibit thermoresponsive surface plasmon resonance, enhanced catalytic properties and excellent colloidal stability.

Aerosol-Processed Thermosensitive Nanocomposites for Controlled Drug Release

In this study, an ambient-spark-produced iron (Fe)-nanoparticle-laden nitrogen gas was mixed with an atomized solution of N-isopropylacrylamide (NIPAM)-polydimethylsiloxane (PDMS). The Fe nanoparticles reacted with NIPAM-PDMS in the atomized droplets to form encapsulated Fe nanoparticles, i.e., Fe@NIPAM-PDMS nanocomposites, whose size distribution was unimodal (showing only a NIPAM-PDMS-like distribution, with the Fe distribution eliminated). By varying processing temperatures, it was possible to obtain Fe@NIPAM-PDMS nanocomposites with different sizes and morphologies. This is further attributed to the quantitative incorporation of Fe nanoparticles into atomized NIPAM-PDMS-doxorubicin (DOX) droplets. The Fe@NIPAM-PDMS-DOX nanocomposites released different amounts of DOX under a magnetothermal effect, which produced different levels of cytotoxic effects on the targeted HeLa cells. The thermosensitivity makes these nanocomposites an ideal candidate for important applications such as controlled drug delivery.

Photoresponsive coumarin-stabilized polymeric nanoparticles as a detectable drug carrier

The ability to create aqueous suspended stable nanoparticles of the hydrophobic homopolymer poly(ϵ-caprolactone) end-functionalized with coumarin moieties (CPCL) is demonstrated. Nanoparticles of CPCL are prepared in a continuous manner using nanoprecipitation. The resulting nanoparticles are spherical in morphology, about 40 nm in diameter, and possess a narrow size distribution and excellent stability over 4 months by repulsive surface charge. Nanoparticle size can be easily controlled by manipulating the concentration of CPCL in the solution. The interparticle assembly between the nanoparticles can be reversibly adjusted with photoirradiation due to photoinduced [2 + 2] cyclodimerization and cleavage between the coumarin molecules. In addition, the CPCL nanoparticles show significant cellular uptake without cytotoxicity, and the intrinsic fluorescence of the coumarin functional group permits the direct detection of cellular internalization.

Designing nanostructured block copolymer surfaces to control protein adhesion

The profile and conformation of proteins that are adsorbed onto a polymeric biomaterial surface have a profound effect on its in vivo performance. Cells and tissue recognize the protein layer rather than directly interact with the surface. The chemistry and morphology of a polymer surface will govern the protein behaviour. So, by controlling the polymer surface, the biocompatibility can be regulated. Nanoscale surface features are known to affect the protein behaviour, and in this overview the nanostructure of self-assembled block copolymers will be harnessed to control protein behaviour. The nanostructure of a block copolymer can be controlled by manipulating the chemistry and arrangement of the blocks. Random, A-B and A-B-A block copolymers composed of methyl methacrylate copolymerized with either acrylic acid or 2-hydroxyethyl methacrylate will be explored. Using atomic force microscopy (AFM), the surface morphology of these block copolymers will be characterized. Further, AFM tips functionalized with proteins will measure the adhesion of that particular protein to polymer surfaces. In this manner, the influence of block copolymer morphology on protein adhesion can be measured. AFM tips functionalized with antibodies to fibronectin will determine how the surfaces will affect the conformation of fibronectin, an important parameter in evaluating surface biocompatibility.

Living Radical Polymerization by the RAFT Process – A Third Update

This paper provides a third update to the review of reversible deactivation radical polymerization (RDRP) achieved with thiocarbonylthio compounds (ZC(=S)SR) by a mechanism of reversible addition-fragmentation chain transfer (RAFT) that was published in June 2005 (Aust. J. Chem. 2005, 58, 379). The first update was published in November 2006 (Aust. J. Chem. 2006, 59, 669) and the second in December 2009 (Aust. J. Chem. 2009, 62, 1402). This review cites over 700 publications that appeared during the period mid 2009 to early 2012 covering various aspects of RAFT polymerization which include reagent synthesis and properties, kinetics and mechanism of polymerization, novel polymer syntheses, and a diverse range of applications. This period has witnessed further significant developments, particularly in the areas of novel RAFT agents, techniques for end-group transformation, the production of micro/nanoparticles and modified surfaces, and biopolymer conjugates both for therapeutic and diagnostic applications.

Hepta(3,3,3-trifluoropropyl) polyhedral oligomeric silsesquioxane-capped poly(N-isopropylacrylamide) telechelics: synthesis and behavior of physical hydrogels

Hepta(3,3,3-trifluoropropyl) polyhedral oligomeric silsesquioxane (POSS)-capped poly(N-isopropylacrylamide) (PNIPAAm) telechelics with variable lengths of PNIPAAm midblocks were synthesized by the combination of reversible addition-fragmentation chain transfer polymerization (RAFT) and the copper-catalyzed Huisgen 1,3-cycloaddition (i.e., click chemistry). The POSS-capped trithiocarbonate was synthesized and used as the chain transfer agent for the RAFT polymerization of N-isopropylacrylamide. The organic-inorganic amphiphilic telechelics were characterized by means of nuclear magnetic resonance spectroscopy (NMR) and gel permeation chromatography (GPC). Atomic force microscopy (AFM) shows that all the POSS-capped PNIPAAm telechelics exhibited microphase-separated morphologies, in which the POSS terminal groups were self-assembled into the microdomains and dispersed into the continuous PNIPAAm matrices. The POSS nanodomains could behave as the physical cross-linking sites and as a result the physical hydrogels were formed while these POSS-capped PNIPAAm telechelics were subjected to the solubility tests with water. These physical hydrogels possessed well-defined volume phase transition phenomena and displayed rapid reswelling and deswelling thermoresponsive behavior compared to control PNIPAAm hydrogel.