N-halamine copolymers for use in antimicrobial paints

Engineered Cross-Linked Silane with Urea Polymer Thin Durable Coatings onto Polymeric Films for Controlled Antiviral Release of Activated Chlorine and Essential Oils

In March 2020, the World Health Organization announced a pandemic attributed to SARS-CoV-2, a novel beta-coronavirus, which spread widely from China. As a result, the need for antiviral surfaces has increased significantly. Here, the preparation and characterization of new antiviral coatings on polycarbonate (PC) for controlled release of activated chlorine (Cl⁺) and thymol separately and combined are described. Thin coatings were prepared by polymerization of 1-[3-(trimethoxysilyl)propyl] urea (TMSPU) in ethanol/water basic solution by modified Stöber polymerization, followed by spreading the formed dispersion onto surface-oxidized PC film using a Mayer rod with appropriate thickness. Activated Cl-releasing coating was prepared by chlorination of the PC/SiO₂-urea film with NaOCl through the urea amide groups to form a Cl-amine derivatized coating. Thymol releasing coating was prepared by linking thymol to TMSPU or its polymer via hydrogen bonds between thymol hydroxyl and urea amide groups. The activity towards T4 bacteriophage and canine coronavirus (CCV) was measured. PC/SiO₂-urea-thymol enhanced bacteriophage persistence, while PC/SiO₂-urea-Cl reduced its amount by 84%. Temperature-dependent release is presented. Surprisingly, the combination of thymol and chlorine had an improved antiviral activity, reducing the amount of both viruses by four orders of magnitude, indicating synergistic activity. For CCV, coating with only thymol was inactive, while SiO₂-urea-Cl reduced it below a detectable level.

Multifunctional 3D printed porous GelMA/xanthan gum based dressing with biofilm control and wound healing activity

Bacterial infections are the major challenges of wound treatment in current clinical applications. In this study, Three-dimensional (3D) antibacterial wound dressing has been fabricated via introducing N-halamine/TiO₂ to gelatin methacrylate and xanthan gum. The prepared 3D printed dressings showed ideal swelling ratio and excellent water uptake efficiency. TiO₂ nanoparticles were introduced by in-situ to improve the ultraviolet stability of N-halamines. The 3D printed GX2-TiO₂-PSPH-Cl prepared dressings containing titanium dioxide retained 0.19% active chlorine after ultraviolet irradiation for 20 min, which was much higher than that of N-halamine dressings without the addition of TiO₂. The 3D printed dressings showed good antibacterial activity, and 100% of Escherichia coli O157:H7 and Staphylococcus aureus were inactivated after 60 min of contact. Furthermore, the biofilm test indicated that the 3D antibacterial dressings were able to inhibit the formation of bacterial biofilm. The 3D printed dressings possess outstanding biocompatibility. Moreover, in vivo data demonstrated that the 3D printed dressings could significantly accelerate wound healing in a mouse model, indicating that the developed 3D printed dressings are ideal candidates for wound treatment.

Antiviral Polymers Based on N-Halamine Polyurea

N-halamines are a commonly applied class of antimicrobial agents used for a variety of applications relating to human health. Here, we present the modulation of the common polymers polyurea and polyguanidine with the N-halamine technology. The N-H bonds in either polymer were converted to N-Cl or N-Br bonds capable of releasing Cl⁺ or Br⁺ cations to aqueous media as antiviral agents. Controlled release of the oxidizing agents was monitored for a period of 4 weeks. Antiviral activity was evaluated against the T4 bacteriophage as well as against the highly stable plant virus belonging to the Tobamovirus genus, tomato brown rugose fruit virus. The incorporation of the N-halamine technology on commonly used polymers has effectively introduced antiviral functionality for a wide variety of potential applications.

Rapid Biocidal Activity of N-Halamine-Functionalized Polydopamine and Polyethylene Imine Coatings

Microorganisms easily adhere to the surface of substrates and further form biofilms, which present problems in various fields. Therefore, the development of surfaces with antimicrobial adhesion or viability is a promising approach. In this study, we were committed to develop a rapid sterilizing coating. First, polyester fibers were immersed into a mixing solution of dopamine (PDA) and polyethyleneimine (PEI) for forming the co-deposition of PDA and PEI coatings. After this, the co-deposition of PDA and PEI coatings was immersed in a solution of household bleach for chlorination. We found that the nitrogens of PDA and PEI could be chlorinated repeatedly and that the oxidative chlorine content increased with the increasing PEI concentration upon co-deposition. Next, the efficacy of the co-deposition of chlorinated PDA and PEI coatings in eliminating Staphylococcus aureus and Escherichia coli was investigated. We found that the antibacterial ability of the coatings increased with increasing PEI content. In addition, the chlorinated co-deposition coatings had significantly improved antibacterial properties compared to the unchlorinated ones. The chlorinated co-deposition coatings inactivated >99.99% of S. aureus and >99.9% of E. coli after contact of less than 10 min. Therefore, chlorination of a PDA/PEI co-deposition surface is a feasible method for use in antibacterial coatings.

Cross-Linked Polymer Brushes Containing N-Halamine Groups for Antibacterial Surface Applications

Microbial contamination is a significant issue in various areas, especially in the food industry. In this study, to overcome microbial contamination, cross-linked polymer brushes containing N-halamine were synthesized, characterized, and investigated for antibacterial properties. The cross-linked polymer brushes with different N-halamine ratios were synthesized by in-situ cross-linking methods with reversible addition-fragmentation chain transfer (RAFT) polymerization using a bifunctional cross-linker. The RAFT agent was immobilized on an amine-terminated silicon wafer surface and utilized in the surface-initiated RAFT polymerization of [N-(2-methyl-1-(4-methyl-2,5-dioxoimidazolidin-4-yl)propane-2-yl)acrylamide] (hydantoin acrylamide, HA), and N-(2-hydroxypropyl)methacrylamide) (HPMA) monomers. Measurement of film thickness, contact angle, and surface morphology of the resulting surfaces were used to confirm the structural characteristics of cross-linked polymer brushes. The chlorine content of the three different surfaces was determined to be approximately 8-31 × 1013 atoms/cm2. At the same time, it was also observed that the activation-deactivation efficiency decreased during the recharge-discharge cycles. However, it was determined that the prepared N-halamine-containing cross-linked polymer brushes inactivated approximately 96% of Escherichia coli and 91% of Staphylococcus aureus. In conclusion, in the framework of this study, high-performance brush gels were produced that can be used on antibacterial surfaces.

A New Antibacterial N-Halamine Coating Based on Polydopamine

To prevent the formation of biofilms on material surfaces, the latter must have antibacterial properties. The aim of this study is to investigate the synthesis and the antibacterial effect of a new N-halamine coating based on polydopamine (PDA). The benefits of this coating are multiple, notably the green process used to prepare it and the wide variety of organic or inorganic materials that can be functionalized. First, the formation of the PDA coating by oxidative polymerization of dopamine in weak alkaline aqueous solution was studied and characterized. Then, these PDA films were exposed to a NaOCl solution in order to form chloramine functions into the coating, i.e., to immobilize oxidative chlorine on and into the coating. The PDA film chlorination was notably followed in situ by a quartz crystal microbalance (QCM). The influence of the NaOCl solution pH and concentration on chlorination kinetics and on PDA film degradation was evidenced. Finally, the antibacterial properties of the modified PDA coatings were highlighted by testing their antiadhesion and bactericidal properties toward the Escherichia coli bacterial strain.

Synthesis and Characterization of Free and Grafted N-Halamine Nanoparticles for Decomposition of Organic Dyes in an Aqueous Continuous Phase

Synthetic organic dyes constitute a major pollutant in wastewater. Here, we describe the synthesis and characterization of N-halamine nanoparticles (NPs) for decomposition of organic dyes from contaminated wastewater. Cross-linked poly(methacrylamide) (PMAA) NPs of hydrodynamic diameters ranging from 11 ± 1 to 161 ± 31 nm were synthesized at room temperature by redox surfactant-free dispersion copolymerization of methacrylamide and the cross-linking monomer N,N'-methylenebis(acrylamide) in an aqueous continuous phase. The effect of various polymerization parameters on the diameter and size distribution of the formed NPs was studied. Additionally, thin coatings composed of cross-linked PMAA NPs were grafted onto oxidized corona-treated polypropylene (PP) films by redox graft polymerization of the monomers in the presence of oxidized PP films. The free and grafted NPs were converted to N-halamine species by chlorination with sodium hypochlorite. The decomposition kinetics of two model organic dyes, methylene blue (MB) and crystal violet (CV), was evaluated for both free and grafted PMAA-Cl NPs. Free cross-linked PMAA-Cl NPs at room temperature, with concentrations of 5 and 0.5 mg/mL, illustrated full decomposition of CV and approximately 90% decomposition of MB after 42 and 97 h. In order to enhance the dye decomposition, the mixtures were heated to 70 °C. Complete decomposition of CV and MB at PMAA-Cl NP concentrations of 5 and 0.5 mg/mL required 60 and 240 min for CV, respectively, and 180 and 420 min for MB, respectively. Similarly, the PP/PMAA-Cl films also demonstrated a high reduction in the MB concentration after 150 min. Due to the highly efficient dye decomposition, these free and immobilized chlorinated NPs may be utilized as new reagents for decomposition of organic materials from contaminated wastewater.

Novel composite unit with one pyridinium and three N-halamine structures for enhanced synergism and superior biocidability on magnetic nanoparticles

A novel composite unit of enhanced synergism that rises from the use of a cationic pyridinium structure to attract anionic bacteria to three N-halamine structures was designed for superior biocidability on recyclable magnetic nanoparticles. Briefly, 5-(4-hydroxybenzylidene)hydantoin (HBH), containing one imide and amide NH bonds, was synthesized by Knoevenagel condensation ofp-hydroxybenzaldehyde with hydantoin. 3-Triethoxysilylpropyl succinic anhydride was ammonolyzed with 4-aminopyridine to introduce a pyridine structure and form an amide NH and a carboxylic acid group that was esterified with HBH to introduce its two NH bonds. The triethoxysilyl groups of the esterification product were hydrolyzed into silanols to condense with the counterparts of different hydrolysates and on silica modified Fe₃O₄nanoparticles to provide a layer of polymeric modifier. After quaternization of the pyridine and chlorination of NH bonds from each esterification product, the resultant layer is composed of units each of which contains one pyridinium and threeN-halamine sites and exerted higher biocidability against Escherichia coli and Staphylococcus aureus than comparable systems including synergistic ones with one cationic center and one N-halamine, demonstrating an enhanced synergism. The biocidal layer had promising stability under quenching-chlorinating cycles and long-term storage. The study affords a strategy for syntheses of more powerful biocidal surfaces.

Three-dimensionally printed polylactic acid/cellulose acetate scaffolds with antimicrobial effect

This study aimed to develop novel, biodegradable, antiseptic-loaded and low-cost scaffolds using a direct ink writing (DIW) technique for antibacterial applications. Polylactic acid/cellulose acetate (PLA/CA) mixtures with different composition ratios were prepared, and the effect of CA content on the rheological behaviors of the inks was investigated. The printability of the prepared DIW inks was improved with the addition of the appropriate amount of CA, since the formation of hydrogen bonding 3D network between PLA and CA. As a result, a liquid form ink consisting of majority of PLA and minority of CA which was prepared and printed for the first time through DIW technique. Afterwards, the antimicrobial agent, 1-chloro-2,2,5,5-tetramethyl-4-imidazolidinone (MC) was incorporated into the inks for preventing bacterial infections, which showed excellent stability and effective antibacterial activity against S. aureus and E. coli O157:H7 in a short time. Owning the ease of fabrication and the biocidal property, our 3D printed scaffolds will have a wide range of potential applications in the field of food packaging, communal facilities, medical equipments, and biomedical materials.

The three-dimensional and antiseptic-loaded scaffold possessed a high biocidal efficacy.

Combinations of Antimicrobial Polymers with Nanomaterials and Bioactives to Improve Biocidal Therapies

The rise of antibiotic-resistant microorganisms has become a critical issue in recent years and has promoted substantial research efforts directed to the development of more effective antimicrobial therapies utilizing different bactericidal mechanisms to neutralize infectious diseases. Modern approaches employ at least two mixed bioactive agents to enhance bactericidal effects. However, the combinations of drugs may not always show a synergistic effect, and further, could also produce adverse effects or stimulate negative outcomes. Therefore, investigations providing insights into the effective utilization of combinations of biocidal agents are of great interest. Sometimes, combination therapy is needed to avoid resistance development in difficult-to-treat infections or biofilm-associated infections treated with common biocides. Thus, this contribution reviews the literature reports discussing the usage of antimicrobial polymers along with nanomaterials or other inhibitors for the development of more potent biocidal therapies.

Engineering Irrigation Drippers with Rechargeable N-Halamine Nanoparticles for Antifouling Applications

The increased demand for water highlights the need to utilize reclaimed water of various types. In agriculture, for example, which is considered the largest consumer of freshwater, irrigation with treated wastewater can replace much of the need for freshwater. Wastewater is generally used for irrigation through drippers, releasing small amounts of water to the crops. The contaminants found in treated wastewater increase the accumulation of fouling on the drippers, ultimately culminating in blocking of water exit. Thus, there is a crucial need to develop novel approaches to limit biofilm formation on the dripper. Here, we describe the synthesis of N-halamine-derivatized cross-linked polymethacrylamide nanoparticles (NPs) by copolymerization of the monomer methacrylamide and the cross-linker monomer N, N-methylenebisacrylamide and their subsequent embedding in the polyethylene that is used to fabricate the drippers. The newly designed drip system was activated by chlorinating the incorporated NPs and then was fully characterized. The nanofunctionalized drippers were tested in the field, showing excellent antifouling activity for at least 5 months compared to the control. In addition, the inherent recharging capacity of the antifouling NPs constitutes yet another valuable advantage of the currently reported technology.

Rechargeable polyamide-based N-halamine nanofibrous membranes for renewable, high-efficiency, and antibacterial respirators

Emerging infectious diseases (EIDs) have been acknowledged as a major public health concern worldwide. Unfortunately, most protective respirators used to prevent EID transmission suffer from the disadvantage of lacking antimicrobial activity, leading to an increased risk of cross-contamination and post-infection. Herein, we report a novel and facile strategy to fabricate rechargeable and biocidal air filtration materials by creating advanced N-halamine structures based on electrospun polyamide (PA) nanofibers. Our approach can endow the resultant nanofibrous membranes with powerful biocidal activity (6 log CFU reduction against E. coli), an ultrahigh fine particle capture efficiency of 99.999% (N100 level for masks), and can allow the antibacterial efficacy and air filtration performance to be renewed in a one-step chlorination process, which has never been reported before. More importantly, for the first time, we revealed the synergistic effect involving the intrinsic structure of polymers and the assembling structure of nanofibers on the chlorination capacity. The successful fabrication of such a fascinating membrane can provide new insights into the development of nanofibrous materials in a multifunctional, durable, and renewable form.

Development of new hydantoin-based biocidal polymers with improved rechargeability and anti-microbial activity

Novel hydantoin based co-polymers containing both amide and imide positions for halogen capture with improved rechargeability and antibacterial activity were developed.

Studies of PET nonwovens modified by novel antimicrobials configured with both N-halamine and dual quaternary ammonium with different alkyl chain length

This work describes the synthesis of novel antimicrobial agents consisting of N-halamine and dual quaternary ammonium with different alkyl chain lengths and their antimicrobial applications for PET nonwovens.

Scalable and Rechargeable Antimicrobial Coating for Food Safety Applications

Environmental surfaces are common avenues for microbial contamination and transmission in food-processing establishments. We recently synthesized a polymer that combines both N-halamine and dopamine functional groups to form a novel antimicrobial coating material. A series of chemical (titration) and biological ("sandwich" and anti-inhabitation) tests were designed to prove the stability and functionality of as-developed coating material. Halamine-dopamine polymer-coated stainless-steel surface inactivated 6 log₁₀ CFU of both Staphylococcus aureus and Escherichia coli O157:H7 under experimental detection limit within 10 min of contact time. After three "discharge-recharge" cycles, the surface maintained the same antimicrobial effectiveness; 60% of the surface chlorine remained after 10 "discharge-recharge" cycles. In addition, the coating thickness and chlorine content could be further tuned through adjusting the formulation of the coating. We also demonstrated that this coating material could be easily scaled up to apply on real food equipment parts through a spray-coating method. Thus our polymer material has great potential to produce a high-performance, low-cost, and easy-to-apply coating on food-associated environmental surfaces for food safety preventive-control applications.

Antimicrobial Activity of N-Halamine-Coated Materials in Broiler Chicken Houses

The antimicrobial activity of 1-chloro-2,2,5,5-tetramethyl-4-imidazoidinone (MC), a nonbleaching N-halamine compound, was investigated on materials commonly used in broiler production, including stainless steel, galvanized metal, aluminum, plastic, and pressure-treated wood. MC aqueous solutions at 0.02, 0.04, and 0.06% were challenged with Salmonella Typhimurium and Campylobacter jejuni at 6 log CFU/mL, resulting in complete inactivation of both bacteria in 30 min with 0.06% MC. Follow-up experiments were performed using test materials treated with 0.1 and 1% MC and challenged with Salmonella Typhimurium and C. jejuni at 6 log CFU per coupon. Stability of MC on the various surfaces of testing materials was assessed, and the chlorine content of the materials was measured using iodometric thiosulfate titration over a 4-week period. Antimicrobial activities were evaluated by a sandwich test on each sampling day during 4 weeks of storage. On the samples treated with 1% MC, bacteria at 6 log CFU per coupon were completely inactivated within 2 h of contact time. The antimicrobial activity extended to 4 weeks, and the active chlorine atoms in the treated materials decreased from the initial 10¹⁶ to 10¹⁵ atoms per cm². Overall, MC had high stability and long-lasting antimicrobial activity, which suggests that MC has high potential for use as a novel antimicrobial agent to lower the microbial load on broiler house materials.

From Nano to Micro: using nanotechnology to combat microorganisms and their multidrug resistance

The spread of antibiotic resistance and increasing prevalence of biofilm-associated infections is driving demand for new means to treat bacterial infection. Nanotechnology provides an innovative platform for addressing this challenge, with potential to manage even infections involving multidrug-resistant (MDR) bacteria. The current review summarizes recent progress over the last 2 years in the field of antibacterial nanodrugs, and describes their unique properties, mode of action and activity against MDR bacteria and biofilms. Biocompatibility and commercialization are also discussed. As opposed to the more common division of nanoparticles (NPs) into organic- and inorganic-based materials, this review classifies NPs into two functional categories. The first includes NPs exhibiting intrinsic antibacterial properties and the second is devoted to NPs serving as a cargo for delivering antibacterial agents. Antibacterial nanomaterials used to decorate medical devices and implants are reviewed here as well.

Synthesis and polymerization of a new hydantoin monomer with three halogen binding sites for developing highly antibacterial surfaces

Novel three halogen capturing hydantoin monomer-based copolymers were synthesized and evaluated for their antibacterial properties.

N-Halamine modified thermoplastic polyurethane with rechargeable antimicrobial function for food contact surface

A TPU elastomer was modified with N-halamine polymers as a novel food contact surface material with rechargeable antimicrobial activity.

Facile synthesis of N-halamine-labeled silica-polyacrylamide multilayer core-shell nanoparticles for antibacterial ability

Silica-polymer antimicrobial composites with a core-shell nanostructure are often prepared through a polymeric process. However, it is difficult to control the polymerization degree of the polymers to give a uniform size distribution. In this article, we present a facile approach to produce antimicrobial silica@polyacrylamide (SiO₂@PAM) core-shell nanoparticles, which were synthesized via an electrostatic self-assembly method using acyclic N-halamine polymeric polyacrylamide. The morphologies and structures of these as-prepared nanoparticles were characterized by different techniques. And their antibacterial performance against both Gram-positive bacteria and Gram-negative bacteria was also evaluated. Based on the preliminary results, these core-shell nanosized spheres were made of an outer polymer shell which decorated the inner SiO₂ core, showing the encapsulation of silica nanoparticles with PAM polymers. After chlorination, the resultant nanosized particles displayed a powerful and stable bactericidal capability toward both of the two model bacterial species. Bactericidal assessment further suggested a coordinated effect of the well-known antibacterial performance of N-halamines and the flocculation of PAM on the antibacterial behavior. The in vitro cytotoxicity of the prepared nanoparticles with varying concentrations was studied using mouse fibroblast cells (L929). The CCK-8 assay revealed that the SiO₂@PAM composites possessed a non-cytotoxic and favorable response to the seeded cells in vitro. These results indicate the suitability of the SiO₂@PAM composite particles for controlling biocidal activity, demonstrating their potential applications in deactivating bacteria or even disease control.

Evaluation of Novel Antibacterial N-Halamine Nanoparticles Prodrugs towards Susceptibility of Escherichia coli Induced by DksA Protein

Novel N-halamine nanoparticles potentially useful for killing pathogenic bacteria, i.e., SiO2@PS/N-halamine NPs, were successfully synthesized via the immobilization of N-halamines onto the polystyrene-coated silica nanoparticles (SiO2@PS NPs). The effect of reaction conditions, i.e., chlorination temperature, bleaching concentration, chlorination time, on the oxidative chlorine content in the products was systematically investigated. The antibacterial activity of the products was tested via the modified plate counting methd using Escherichia coli (E. coli) as a model bacterium. The possible mechanism of the antibacterial action of the products was also studied using scanning electron microscopy combined with a inhibition zone study. The antimicrobial capability of the products was well controlled by tuning the oxidative chlorine content in the products. More importantly, the role of DksA protein in the susceptibility of E. coli against the products was proven using a time-kill assay. This in-depth investigation of the sensitivity of E. coli towards N-halamine NPs provides a systematic understanding of the utility of N-halamines for deactivating bacteria or even disease control.

Killing mechanism of stable N-halamine cross-linked polymethacrylamide nanoparticles that selectively target bacteria

Increased resistance of bacteria to disinfection and antimicrobial treatment poses a serious public health threat worldwide. This has prompted the search for agents that can inhibit both bacterial growth and withstand harsh conditions (e.g., high organic loads). In the current study, N-halamine-derivatized cross-linked polymethacrylamide nanoparticles (NPs) were synthesized by copolymerization of the monomer methacrylamide (MAA) and the cross-linker monomer N,N-methylenebis(acrylamide) (MBAA) and were subsequently loaded with oxidative chlorine using sodium hypochlorite (NaOCl). The chlorinated NPs demonstrated remarkable stability and durability to organic reagents and to repetitive bacterial loading cycles as compared with the common disinfectant NaOCl (bleach), which was extremely labile under these conditions. The antibacterial mechanism of the cross-linked P(MAA-MBAA)-Cl NPs was found to involve generation of reactive oxygen species (ROS) only upon exposure to organic media. Importantly, ROS were not generated upon suspension in water, revealing that the mode of action is target-specific. Further, a unique and specific interaction of the chlorinated NPs with Staphylococcus aureus was discovered, whereby these microorganisms were all specifically targeted and marked for destruction. This bacterial encircling was achieved without using a targeting module (e.g., an antibody or a ligand) and represents a highly beneficial, natural property of the P(MAA-MBAA)-Cl nanostructures. Our findings provide insights into the mechanism of action of P(MAA-MBAA)-Cl NPs and demonstrate the superior efficacy of the NPs over bleach (i.e., stability, specificity, and targeting). This work underscores the potential of developing sustainable P(MAA-MBAA)-Cl NP-based devices for inhibiting bacterial colonization and growth.

Contact active antibacterial phosphonium coatings cured with UV light

Antibacterial phosphonium coatings were prepared by UV curing of phosphonium monomers. The simple approach and high stability of phosphoniums relative to ammoniums makes these coatings promising alternatives to ammonium surfaces.

One-step synthesis and characterization of polyaniline nanofiber/silver nanoparticle composite networks as antibacterial agents

Through a facile and effective seeding polymerization reaction via a one-step redox/complexation process, which took place in aqueous medium at ambient temperature, silver nanoparticles (Ag NPs) embedded polyaniline nanofiber (PANI NF) networks were synthesized as antibacterial agents. During the reaction, not only NF morphology formation of the resulting conducting polymers (CPs) but also amplification of the aqueous silver nitrate (AgNO3) solutions' oxidative potentials were managed by vanadium pentoxide (V2O5) sol-gel nanofibers, which acted as well-known nanofibrous seeding agents and the auxiliary oxidative agent at the same time. The PANI/Ag nanocomposites were proven to exhibit excellent antibacterial property against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. Antibacterial property performance and average life span of the nanocomposite network were optimized through the homogeneous distribution/embedment of Ag NPs within one-dimensional (1-D) PANI NF matrix. The antibacterial efficacy tests and nanocomposite material characterization results further indicated that the sole components of PANI/Ag have a synergistic effect to each other in terms of antibacterial property. Thus, this well-known catalytic seeding approach via a one-step oxidative polymerization reaction can be considered as a general methodology and a substantial fabrication tool to synthesize Ag NP decorated nanofibrillar PANI networks as advanced antibacterial agents.

Nuclease-functionalized poly(styrene-b-isobutylene-b-styrene) surface with anti-infection and tissue integration bifunctions

Hydrophobic thermoplastic elastomers, e.g., poly(styrene-b-isobutylene-b-styrene) (SIBS), have found various in vivo biomedical applications. It has long been recognized that biomaterials can be adversely affected by bacterial contamination and clinical infection. However, inhibiting bacterial colonization while simultaneously preserving or enhancing tissue-cell/material interactions is a great challenge. Herein, SIBS substrates were functionalized with nucleases under mild conditions, through polycarboxylate grafts as intermediate. It was demonstrated that the nuclease-modified SIBS could effectively prevent bacterial adhesion and biofilm formation. Cell adhesion assays confirmed that nuclease coatings generally had no negative effects on L929 cell adhesion, compared with the virgin SIBS reference. Therefore, the as-reported nuclease coating may present a promising approach to inhibit bacterial infection, while preserving tissue-cell integration on polymeric biomaterials.

Design, synthesis and biocidal effect of novel amine N-halamine microspheres based on 2,2,6,6-tetramethyl-4-piperidinol as promising antibacterial agents

Novel superior antibiotics, i.e. amine N-halamine nanoparticles were synthesized via the radical copolymerization, and their bactericidal effects were studied.

Barbituric acid-based magnetic N-halamine nanoparticles as recyclable antibacterial agents

Novel recyclable bactericidal materials, barbituric acid-based magnetic N-halamine nanoparticles (BAMNH NPs), were fabricated by coating of magnetic silica nanoparticles (MS NPs) with barbituric acid-based N-halamine by the aid of the radical polymerization. The sterilizing effect on the bacterial strain is investigated by incubating Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa) and Gram-positive bacteria (Staphylococcus aureus and Bacillus subtilis). The as-prepared BAMNH NPs exhibit higher biocidal activity than the bulk powder barbituric acid-based N-halamine due to the high activated surface area. The structural effect of N-halamine on antimicrobial performance was fully clarified through the comparison between BAMNH NPs and hydantoin-based magnetic N-halamine nanoparticles (HMNH NPs). BAMNH NPs exhibited promising stability toward repeated washing and long-term storage. BAMNH NPs with different chlorine content were comparatively chosen to investigate the influence of chlorine content on the antimicrobial activity. An antibacterial recycle experiment revealed that no significant change occurred in the structure and antibacterial efficiency of BAMNH NPs after five recycle experiments. The combination of barbituric acid-based N-halamine with magnetic component results in an obvious synergistic effect and facilitates the repeated antibacterial applications, providing potential and ideal candidates for sterilization or even for the control of disease.

Antimicrobial N-halamine polymers and coatings: a review of their synthesis, characterization, and applications

Antimicrobial N-halamine polymers and coatings have been studied extensively over the past decade thanks to their numerous qualities such as effectiveness toward a broad spectrum of microorganisms, long-term stability, regenerability, safety to humans and environment and low cost. In this review, recent developments are described by emphasizing the synthesis of polymers and/or coatings having N-halamine moieties. Actually, three main approaches of preparation are given in detail: polymerization, generation by electrochemical route with proteins as monomers and grafting with precursor monomers. Identification and characterization of the formation of the N-halamine bonds (>N-X with X = Cl or Br or I) by physical techniques such as Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), and by chemical reactions are described. In order to check the antimicrobial activity of the N-halamine compounds, bacterial tests are also described. Finally, some examples of application of these N-halamines in the water treatment, paints, healthcare equipment, and textile industries are presented and discussed.