Synthesis of hierarchical porous carbon monoliths with incorporated metal-organic frameworks for enhancing volumetric based CO₂ capture capability

Investigation on cost-effective composites for CO2 adsorption from post-gasification residue and metal organic framework

Cost-effective CO2 adsorbents are gaining increasing attention as viable solutions for mitigating climate change. In this study, composites were synthesized by electrochemically combining the post-gasification residue of Macadamia nut shell with copper benzene-1,3,5-tricarboxylate (CuBTC). Among the different composites synthesized, the ratio of 1:1 between biochar and CuBTC (B 1:1) demonstrated the highest CO2 adsorption capacity. Under controlled laboratory conditions (0°C, 1 bar, without the influence of ambient moisture or CO2 diffusion limitations), B 1:1 achieved a CO2 adsorption capacity of 9.8 mmol/g, while under industrial-like conditions (25°C, 1 bar, taking into account the impact of ambient moisture and CO2 diffusion limitations within a bed of adsorbent), it reached 6.2 mmol/g. These values surpassed those reported for various advanced CO2 adsorbents investigated in previous studies. The superior performance of the B 1:1 composite can be attributed to the optimization of the number of active sites, porosity, and the preservation of the full physical and chemical surface properties of both parent materials. Furthermore, the composite exhibited a notable CO2/N2 selectivity and improved stability under moisture conditions. These favorable characteristics make B 1:1 a promising candidate for industrial applications.

Enhancing CO2 capture through innovating monolithic graphene oxide frameworks

The advancement and engineering of novel crystalline materials is facilitated through the utilization of innovative porous crystalline structures, established via KOH-treated monolithic graphene oxide frameworks. These materials exhibit remarkable and versatile characteristics for both functional exploration and applications within the realm of CO2 capture. In this comprehensive study, we have synthesized monolithic reduced graphene oxide-based adsorbents through a meticulous self-assembly process involving different mass ratios of GO/malic acid (MaA) (1:0.250, 1:0.500, and 1:1 by weight). Building upon this foundation, we further modified MGO 0.250 through KOH-treatment by chloroacetic acid method, leading to the creation of MGO 0.250_KOH, which was subjected to CO2 capture assessments. The comprehensive investigation encompassed an array of parameters including morphology, specific surface area, crystal defects, functional group identification, and CO2 capture efficiency. Employing a combination of FT-IR, XRD, Raman, BET, SEM, HR-TEM, and XPS techniques, the study revealed profound insights. Particularly notable was the observation that the MGO 0.250_KOH adsorbent exhibited an exceptional CO2 capture performance, leading to a significant enhancement of the CO2 capture capacity from 1.69 mmol g-1 to 2.35 mmol g-1 at standard conditions of 25 °C and 1 bar pressure. This performance enhancement was concomitant with an augmentation in surface area, elevating from 287.93 to 419.75 m2 g-1 (a nearly 1.5-fold increase compared to MGO 1.000 with a surface area of 287.93 m2 g-1). The monolithic adsorbent demonstrated a commendable production yield of 82.92%, along with an impressive regenerability of 98.80% at 100 °C. Additionally, adsorbent's proficiency in CO2 adsorption, rendering it a promising candidate for post-combustion CO2 capture applications. These findings collectively underscore the capacity adsorbents to significantly amplify CO2 capture capabilities. The viability of employing this strategy as an uncomplicated pre-treatment technique in various industrial sectors is a plausible prospect, given the study's outcomes.

Experimental kinetics and thermodynamics investigation: Chemically activated carbon-enriched monolithic reduced graphene oxide for efficient CO2 capture

In this research, we have developed solid MGOs by self-assembled reduction process of GO at 90 °C with different weight ratios of oxalic acid (1:1, 1:0.500, and 1:0.250). The as-synthesized monoliths were carbonized (at 600 °C) and chemically activated with varying proportions of NaOH (1:1, 1:2, and 1:3). This materials offer the CO2 adsorption effect under dynamic conditions, fast mass transfer, easy handling, and outstanding stability throughout the adsorption-desorption cycle. FE-SEM, and HR-TEM analyses confirmed the porous nature and shape of the adsorbents, while XPS examination revealed the presence of distinct functional groups on the surface of the monolith. By increasing the mass ratios (MGO:NaOH) from 1:1 to 1:2, the surface areas increased by approximately 2.6 times, ranging from 520.8 to 753.9 m2 g⁻1 (surface area of the untreated MGO was 289.2 m2 g⁻1). Consequently, this resulted in a notable enhancement of 2.10 mmol g⁻1 in dynamic CO2 capture capacity. The assessment encompassed the evaluation of production yield, selectivity, regenerability, kinetics, equilibrium isotherm, and isosteric temperatures of adsorption (Qst). The decrease in CO2 capture effectiveness with rising adsorption temperature indicated an exothermic and physisorption process. The regenerability of 99.1 % at 100 °C and excellent cyclic stability with efficient CO2 adsorption make this monolithic adsorbent appropriate for post-combustion CO2 capture. The significant Qst lend support to the heterogeneity of the adsorbent's surface, and the pseudo-second-order kinetic model along with the Freundlich isotherm model emerged as the most fitting. Therefore, the current investigation shows that the carbon-enriched adsorbents enhance the CO2 adsorption capacity. It may be used as a low-cost pretreatment method on an industrial scale before carbon capture.

Carbon nanotubes: a powerful bridge for conductivity and flexibility in electrochemical glucose sensors

The utilization of nanomaterials in the biosensor field has garnered substantial attention in recent years. Initially, the emphasis was on enhancing the sensor current rather than material interactions. However, carbon nanotubes (CNTs) have gained prominence in glucose sensors due to their high aspect ratio, remarkable chemical stability, and notable optical and electronic attributes. The diverse nanostructures and metal surface designs of CNTs, coupled with their exceptional physical and chemical properties, have led to diverse applications in electrochemical glucose sensor research. Substantial progress has been achieved, particularly in constructing flexible interfaces based on CNTs. This review focuses on CNT-based sensor design, manufacturing advancements, material synergy effects, and minimally invasive/noninvasive glucose monitoring devices. The review also discusses the trend toward simultaneous detection of multiple markers in glucose sensors and the pivotal role played by CNTs in this trend. Furthermore, the latest applications of CNTs in electrochemical glucose sensors are explored, accompanied by an overview of the current status, challenges, and future prospects of CNT-based sensors and their potential applications.

A facile synthesis of CeO2 from the GO@Ce-MOF precursor and its efficient performance in the oxygen evolution reaction

Electrochemical water splitting has enticed fascinating consideration as a key conduit for the advancement of renewable energy systems. Fabricating adequate electrocatalysts for water splitting is fervently preferred to curtail their overpotentials and hasten practical utilizations. In this work, a series of Ce-MOF, GO@Ce-MOF, calcinated Ce-MOF, and calcinated GO@Ce-MOF were synthesized and used as high-proficient electrocatalysts for the oxygen evolution reaction. The physicochemical characteristics of the prepared samples were measured by diverse analytical techniques including SEM, HRTEM, FTIR, BET, XPS, XRD, and EDX. All materials underwent cyclic voltammetry tests and were evaluated by electrochemical impedance spectroscopy and oxygen evolution reaction. Ce-MOF, GO@Ce-MOF, calcinated Ce-MOF, and calcinated GO@Ce-MOF have remarkable properties such as enhanced specific surface area, improved catalytic performance, and outstanding permanency in the alkaline solution (KOH). These factors upsurge ECSA and intensify the OER performance of the prepared materials. More exposed surface active-sites present in calcinated GO@Ce-MOF could be the logic for superior electrocatalytic activity. Chronoamperometry of the catalyst for 15°h divulges long-term stability of Ce-MOF during OER. Impedance measurements indicate higher conductivity of synthesized catalysts, facilitating the charge transfer reaction during electrochemical water splitting. This study will open up a new itinerary for conspiring highly ordered MOF-based surface active resources for distinct electrochemical energy applications.

Recent Advances in Carbon-Based Adsorbents for Adsorptive Separation of Light Hydrocarbons

Light hydrocarbons (LHs) separation is an important process in petrochemical industry. The current separation technology predominantly relies on cryogenic distillation, which results in considerable energy consumption. Adsorptive separation using porous solids has received widespread attention due to its lower energy footprint and higher efficiency. Thus, tremendous efforts have been devoted to the design and synthesis of high-performance porous solids. Among them, porous carbons display exceptional stability, tunable pore structure, and surface chemistry and thus represent a class of novel adsorbents upon achieving the matched pore structures for LHs separations. In this review, the modulation strategies toward advanced carbon-based adsorbents for LHs separation are firstly reviewed. Then, the relationships between separation performances and key structural parameters of carbon adsorbents are discussed by exemplifying specific separation cases. The research findings on the control of the pore structures as well as the quantification of the adsorption sites are highlighted. Finally, the challenges of carbonaceous adsorbents facing for LHs separation are given, which would motivate us to rationally design more efficient absorbents and separation processes in future.

Metal–Organic Frameworks (MOFs) Containing Adsorbents for Carbon Capture

In this study, new composite materials of montmorillonite, biochar, or aerosil, containing metal–organic frameworks (MOF) were synthesized in situ. Overall, three different MOFs—CuBTC, UTSA-16, and UiO-66-BTEC—were used. Obtained adsorbents were characterized using powder X-ray diffraction, thermogravimetric analysis, nitrogen adsorption porosimetry, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and Fourier transform infrared spectrophotometry. Additionally, the content of metallic and nonmetallic elements was determined to investigate the crystalline structure, surface morphology, thermal stability of the obtained MOF-composites, etc. Cyclic CO2 adsorption analysis was performed using the thermogravimetric approach, modeling adsorption from flue gasses. In our study, the addition of aerosil to CuBTC (CuBTC-A-15) enhanced the sorbed CO2 amount by 90.2% and the addition of biochar (CuBTC-BC-5) increased adsorbed the CO2 amount by 75.5% in comparison to pristine CuBTC obtained in this study. Moreover, the addition of montmorillonite (CuBTC-Mt-15) increased the adsorbed amount of CO2 by 27%. CuBTC-A-15 and CuBTC-BC-5 are considered to be the most perspective adsorbents, capturing 3.7 mmol/g CO2 and showing good stability after 20 adsorption-desorption cycles.

APTES-Based Silica Nanoparticles as a Potential Modifier for the Selective Sequestration of CO2 Gas Molecules

In this work, we have described the characterization of hybrid silica nanoparticles of 50 nm size, showing outstanding size homogeneity, a large surface area, and remarkable CO2 sorption/desorption capabilities. A wide battery of techniques was conducted ranging from spectroscopies such as: UV-Vis and IR, to microscopies (SEM, AFM) and CO2 sorption/desorption isotherms, thus with the purpose of the full characterization of the material. The bare SiO2 (50 nm) nanoparticles modified with 3-aminopropyl (triethoxysilane), APTES@SiO2 (50 nm), show a remarkable CO2 sequestration enhancement compared to the pristine material (0.57 vs. 0.80 mmol/g respectively at 50 °C). Furthermore, when comparing them to their 200 nm size counterparts (SiO2 (200 nm) and APTES@SiO2 (200 nm)), there is a marked CO2 capture increment as a consequence of their significantly larger micropore volume (0.25 cm3/g). Additionally, ideal absorbed solution theory (IAST) was conducted to determine the CO2/N2 selectivity at 25 and 50 °C of the four materials of study, which turned out to be >70, being in the range of performance of the most efficient microporous materials reported to date, even surpassing those based on silica.

Strong Foam-like Composites from Highly Mesoporous Wood and Metal-Organic Frameworks for Efficient CO2 Capture

Mechanical stability and multicycle durability are essential for emerging solid sorbents to maintain an efficient CO2 adsorption capacity and reduce cost. In this work, a strong foam-like composite is developed as a CO2 sorbent by the in situ growth of thermally stable and microporous metal-organic frameworks (MOFs) in a mesoporous cellulose template derived from balsa wood, which is delignified by using sodium chlorite and further functionalized by 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation. The surface carboxyl groups in the TEMPO-oxidized wood template (TO-wood) facilitate the coordination of the cellulose network with multivalent metal ions and thus enable the nucleation and in situ growth of MOFs including copper benzene-1,3,5-tricarboxylate [Cu3(BTC)2], zinc 2-methylimidazolate, and aluminum benzene-1,3,5-tricarboxylate. The TO-wood/Cu3(BTC)2 composite shows a high specific surface area of 471 m2 g-1 and a high CO2 adsorption capacity of 1.46 mmol g-1 at 25 °C and atmospheric pressure. It also demonstrates high durability during the temperature swing cyclic CO2 adsorption/desorption test. In addition, the TO-wood/Cu3(BTC)2 composite is lightweight but exceptionally strong with a specific elastic modulus of 3034 kN m kg-1 and a specific yield strength of 68 kN m kg-1 under the compression test. The strong and durable TO-wood/MOF composites can potentially be used as a solid sorbent for CO2 capture, and their application can possibly be extended to environmental remediation, gas separation and purification, insulation, and catalysis.

Enhancement of Hydrothermal Stability and CO2 Adsorption of Mg-MOF-74/MCF Composites

Hierarchical porous composite Mg-MOF-74/MCFs were successfully synthesized using a simple and facile method under in situ solvothermal conditions. Textural structures and morphologies of the composites were characterized by X-ray diffraction (XRD), N₂ adsorption-desorption isotherms, and scanning electron microscopy (SEM), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). The results demonstrate that a large amount of nanosized Mg-MOF-74 particles is incorporated into the pores of mesocellular siliceous foams (MCFs) without remarkable aggregation and the composites possess microporous and mesoporous characteristics of both components. In addition, CO₂ adsorption properties of the composites were tested in a fixed bed with/without hydrothermal treatment. The total CO₂ adsorption capacities were calculated by breakthrough curves. The CO₂ adsorption capacity of the composites reaches 1.68 mmol/g, which is smaller than that of pristine Mg-MOF-74. However, the total CO₂ adsorption capacity of the composites after hydrothermal treatment reaches 2.66 mmol/g, which is larger than that of Mg-MOF-74 (2.39 mmol/g) under the same condition. XRD patterns and SEM images of the composites demonstrate that the hydrothermal stability and CO₂ adsorption performance of the composites were improved compared with those of pristine Mg-MOF-74 after hydrothermal treatment.

Advances in Post-Combustion CO2 Capture by Physical Adsorption: From Materials Innovation to Separation Practice

The atmospheric CO₂ concentration continues a rapid increase to its current record high value of 416 ppm for the time being. It calls for advanced CO₂ capture technologies. One of the attractive technologies is physical adsorption-based separation, which shows easy regeneration and high cycle stability, and thus reduced energy penalties and cost. The extensive research on this topic is evidenced by the growing body of scientific and technical literature. The progress spans from the innovation of novel porous adsorbents to practical separation practices. Major CO₂ capture materials include the most widely used industrially relevant porous carbons, zeolites, activated alumina, mesoporous silica, and the newly emerging metal-organic frameworks (MOFs) and covalent-organic framework (COFs). The key intrinsic properties such as pore structure, surface chemistry, preferable adsorption sites, and other structural features that would affect CO₂ capture capacity, selectivity, and recyclability are first discussed. The industrial relevant variables such as particle size of adsorbents, the mechanical strength, adsorption heat management, and other technological advances are equally important, even more crucial when scaling up from bench and pilot-scale to demonstration and commercial scale. Therefore, we aim to bring a full picture of the adsorption-based CO₂ separation technologies, from adsorbent design, intrinsic property evaluation to performance assessment not only under ideal equilibrium conditions but also in realistic pressure swing adsorption processes.

Metal-Organic Frameworks as a Platform for CO2 Capture and Chemical Processes: Adsorption, Membrane Separation, Catalytic-Conversion, and Electrochemical Reduction of CO2

The continuous rise in the atmospheric concentration of carbon dioxide gas (CO2) is of significant global concern. Several methodologies and technologies are proposed and applied by the industries to mitigate the emissions of CO2 into the atmosphere. This review article offers a large number of studies that aim to capture, convert, or reduce CO2 by using a superb porous class of materials (metal-organic frameworks, MOFs), aiming to tackle this worldwide issue. MOFs possess several remarkable features ranging from high surface area and porosity to functionality and morphology. As a result of these unique features, MOFs were selected as the main class of porous material in this review article. MOFs act as an ideal candidate for the CO2 capture process. The main approaches for capturing CO2 are pre-combustion capture, post-combustion capture, and oxy-fuel combustion capture. The applications of MOFs in the carbon capture processes were extensively overviewed. In addition, the applications of MOFs in the adsorption, membrane separation, catalytic conversion, and electrochemical reduction processes of CO2 were also studied in order to provide new practical and efficient techniques for CO2 mitigation.

Investigation on Electroreduction of CO2 to Formic Acid Using Cu3(BTC)2 Metal-Organic Framework (Cu-MOF) and Graphene Oxide

A recent class of porous materials, viz., metal-organic frameworks (MOFs), finds applications in several areas. In this work, Cu-based MOFs (Cu-benzene-1,3,5-tricarboxylic acid) along with graphene oxide, viz., Cu-MOF/GO, are synthesized and used further for reducing CO2 electrochemically. The reduction was accomplished in various supporting electrolytes, viz., KHCO3/H2O, tetrabutylammonium bromide (TBAB)/dimethylformamide (DMF), KBr/CH3OH, CH3COOK/CH3OH, TBAB/CH3OH, and tetrabutylammonium perchlorate (TBAP)/CH3OH to know their effect on product formation. The electrode fabricated with the synthesized material was used for testing the electroreduction of CO2 at various polarization potentials. The electrochemical reduction of CO2 is carried out via the polarization technique within the experimented potential regime vs saturated calomel electrode (SCE). Ion chromatography was employed for the analysis of the produced products in the electrolyte, and the results showed that HCOOH was the main product formed through reduction. The highest concentrations of HCOOH formed for different electrolytes are 0.1404 mM (-0.1 V), 66.57 mM (-0.6 V), 0.2690 mM (-0.5 V), 0.2390 mM (-0.5 V), 0.7784 mM (-0.4 V), and 0.3050 mM (-0.45 V) in various supporting electrolyte systems, viz., KHCO3/H2O, TBAB/DMF, KBr/CH3OH, CH3COOK/CH3OH, TBAB/CH3OH, and TBAP/CH3OH, respectively. The developed catalyst accomplished a significant efficiency in the conversion and reduction of CO2. A high faradic efficiency of 58% was obtained with 0.1 M TBAB/DMF electrolyte, whereas for Cu-MOF alone, the efficiency was 38%. Thus, the work is carried out using a cost-effective catalyst for the conversion of CO2 to formic acid than using the commercial electrodes. The synergistic effect of GO sheets at 3 wt % concentration and Cu+OH- interaction leads to the formation of formic acid in various electrolytes.

Metal-organic framework gels and monoliths

The synthesis of metal-organic frameworks (MOFs) has, to date, largely been in the form of crystalline powders. However, interest in different physical morphologies of this class of materials is growing. In this perspective, we provide an overview of the structure, properties and applications of MOF monoliths. In particular, we explore the complex synthetic landscapes associated with MOF crystallization and discuss the synthetic factors leading to the formation of MOF gels, i.e. the precursor to sol-gel MOF monoliths. Finally, we provide our thoughts on the future development of this field, and attempt to highlight the importance of the MOF gel state in the discovery of new functional materials.

Synthesis of micro–mesoporous CPO-27-Mg@KIT-6 composites and their test in CO2 adsorption

Novel composites were synthesised through a fusion between CPO-27-Mg framework and mesoporous silica KIT-6 and tested in the CO₂ adsorption.

Recent advances in the shaping of metal–organic frameworks

In this review, the recent advances in the shaping of MOFs are overviewed, and some promising strategies recently developed are highlighted, including templated shaping, self-shaping, shaping on substrates, and shaping with sacrificial materials.

Industrial carbon dioxide capture and utilization: state of the art and future challenges

This review covers the sustainable development of advanced improvements in CO₂ capture and utilization.

Carbon capture and conversion using metal–organic frameworks and MOF-based materials

This review summarizes recent advances and highlights the structure–property relationship on metal–organic framework-based materials for carbon dioxide capture and conversion.

Biowaste-derived 3D honeycomb-like N and S dual-doped hierarchically porous carbons for high-efficient CO2 capture

Considering the characteristics of abundant narrow micropores of <1 nm, appropriate proportion of mesopores/macropores and suitable surface functionalization for a highly-efficient carbon-based CO₂ adsorbent, we proposed a facile and cost-effective strategy to prepare N and S dual-doped carbons with well-interconnected hierarchical pores. Benefiting from the unique structural features, the resultant optimal material showed a prominent CO₂ uptake of up to 7.76 and 5.19 mmol g⁻¹ at 273 and 298 K under 1 bar, and importantly, a superb CO₂ uptake of 1.51 mmol g⁻¹ at 298 K and 0.15 bar was achieved, which was greatly significant for CO₂ capture from the post-combustion flue gases in practical application. A systematic study demonstrated that the synergetic effect of ultramicroporosity and surface functionalization determined the CO₂ capture properties of porous carbons, and the synergistic influence mechanism of nitrogen/sulfur dual-doping on CO₂ capture performance was also investigated in detail. Importantly, such as-prepared carbon-based CO₂ adsorbents also showed an outstanding recyclability and CO₂/N₂ selectivity. In view of cost-effective fabrication, the excellent adsorption capacity, high selectivity and simple regeneration, our developed strategy was valid and convenient to design a novel and highly-efficient carbonaceous adsorbent for large-scale CO₂ capture and separation from post-combustion flue gases.

We proposed a facile and cost-effective strategy to prepare N/S dual-doped carbons with abundant micropores of <1 nm, appropriate proportion of meso/macropores and suitable surface functionalization for highly efficient CO₂ capture.

Open-Tip Carbon Nanotubes for Enhanced Methane Adsorption Performance: A Comparative Study

A series of open-tip carbon nanotubes (CNTs) were obtained by HNO3 modification with various concentrations of as-prepared carbon nanotubes via the CVD method, and this work aimed at investigating the structural features of open-tip CNTs for the methane capability. Modified CNTs had higher specific surface area and larger total pore volume, and importantly, greater micropore volume was obtained through HNO3 modification of the as-prepared CNTs. The remarkably high methane adsorption capacities were measured on the modified CNTs under pressure ranges of 0∼4.0 MPa at 298 K. The resulted H-CNT, which exhibited highest specific surface area and micropore volume, showed high methane uptake of 26.15 mg/g from the D-A model. This value was nearly as twice as the methane uptake of original CNTs (13.62 mg/g), along with an initial adsorption heat of 19.4 kJ/mol at lower coverage and 9.5 kJ/mol at higher methane coverage for H-CNT, indicating the physical nature for methane adsorption over open-tip CNTs.

Metal–Organic Framework (MOF)-based CO2 Adsorbents

Rising CO2 levels in the atmosphere resulting from fossil fuel combustion is one of the most significant global environmental concerns. Carbon capture and sequestration (CCS), primarily post-combustion CO2 capture, is an essential research area to reduce CO2 levels and avoid environmental destabilization. Recently, metal–organic frameworks (MOFs) have been attracting attention in the scientific community for potential applications in gas storage and separation, including CCS, owing to their novel properties, such as a large surface area, tunable pore shape and size, and tailored chemical functionality. This chapter starts with a brief introduction about the significance of CO2 adsorption and separation, followed by how MOF-based research endeavors were initiated and explored, and why MOFs are unique for gas adsorption. Secondly, we reviewed the relationship between CO2 adsorption and MOF properties including surface area, pore size and volume, amine functionality, nature of linkers, and structural flexibility, and analyzed the reported data based on the possible adsorption mechanism. The humidity effects on CO2 capture over MOFs and implementation of MOF composites were considered as well. Finally, some conclusions on the status of the developed MOFs and perspectives for future research on MOFs for the practical application of CO2 adsorption and separation were mentioned.

Copper benzene-1,3,5-tricarboxylate (Cu-BTC) metal-organic framework (MOF) and porous carbon composites as efficient carbon dioxide adsorbents

The development of novel porous materials for CO₂ capture and storage has received increasing attention due to the global warming problem. The aim of this work was to develop novel composites by merging Cu-BTC framework and porous carbon materials, including ordered mesoporous non-activated carbon (OMC), ordered mesoporous activated carbon (AC), and nitrogen-containing microporous carbon (NC) as efficient adsorbents for CO₂ capture. The morphology, porosity and surface area of the parent materials and composites were fully characterized. All resulting composites were identified as microporous materials with type I adsorption isotherm. During synthesis of these composites, additional micropores were formed in the interfacial region between heterogeneous phases, which greatly enhances both their specific surface area and porosity. As compared to the parent materials, namely carbons and Cu-BTC, the CO₂ uptake capability of the composites is greatly enhanced due to the presence of micropores at the interface. Specifically, NC-Cu-BTC composite exhibited the highest CO₂ capacity with ∼8.24 and ∼4.51 mmol/g under 1 bar at 0 and 25 °C, respectively. These novel porous carbon/MOF composites may have great potential for adsorption application including CO₂ capture.

Mesoporous Metal-Organic Frameworks: Synthetic Strategies and Emerging Applications

Metal-organic frameworks (MOFs) have attracted much attention over the past two decades due to their highly promising applications not only in the fields of gas storage, separation, catalysis, drug delivery, and sensors, but also in relatively new fields such as electric, magnetic, and optical materials resulting from their extremely high surface areas, open channels and large pore cavities compared with traditional porous materials like carbon and inorganic zeolites. Particularly, MOFs involving pores within the mesoscopic scale possess unique textural properties, leading to a series of research in the design and applications of mesoporous MOFs. Unlike previous Reviews, apart from focusing on recent advances in the synthetic routes, unique characteristics and applications of mesoporous MOFs, this Review also mentions the derivatives, composites, and hierarchical MOF-based systems that contain mesoporosity, and technical boundaries and challenges brought by the drawbacks of mesoporosity. Moreover, this Review subsequently reveals promising perspectives of how recently discovered approaches to different morphologies of MOFs (not necessarily entirely mesoporous) and their corresponding performances can be extended to minimize the shortcomings of mesoporosity, thus providing a wider and brighter scope of future research into mesoporous MOFs, but not just limited to the finite progress in the target substances alone.

Effective Acetylene/Ethylene Separation at Ambient Conditions by a Pigment-Based Covalent-Triazine Framework

A novel covalent-triazine framework (CTF-PO71) is designed and prepared from an organic pigment molecule for high-performance gas separation. The functional sites with different electrostatic potentials on the pore surface of CTF-PO71 demonstrate a strong interaction between C₂ H₂ and CTF-PO71 to achieve preferential adsorption of C₂ H₂ over C₂ H₄ , thus enabling effective capture of a trace amount of C₂ H₂ from the gas mixture. This is the first organic porous polymer that is capable of separating C₂ H₂ and C₂ H₄ . The commercial availability and the low cost of the pigment as well as the high stability of the resultant framework endow CTF-PO71 with a significant potential for practical applications.

Adsorption and Diffusion of C1 to C4 Alkanes in Dual-Porosity Zeolites by Molecular Simulations

We employ grand canonical Monte Carlo and molecular dynamics simulations to systematically study the adsorption and diffusion of C₁ to C₄ alkanes in hierarchical ZSM-5 zeolite with micropores (∼1 nm) and mesopores (>2 nm). The zeolite is characterized by a large surface area of active sites on the microporous scale with high permeability and access to the active sites, which arises from the enhanced transport at the mesoporous scale. We model this zeolite as a microporous Na⁺-exchanged alumino-sillicate zeolite ZSM-5/35 (Si/Al = 35) in which cylindrical mesopores with a diameter of 4 nm have been built by deleting atoms accordingly. We use the TraPPE and Vujić-Lyubartsev force fields along with the Lorentz-Berthelot combining rules to describe adsorbate-adsorbate and adsorbate-adsorbent interactions. The performance of the force fields is assessed by comparing against experimental single-component adsorption isotherms of methane and ethane in microporous ZSM-5/35, which we measured as part of this work. We compare the adsorption isotherms and diffusivities of the adsorbed alkanes in the dual-porosity zeolite with those in microporous ZSM-5/35 and discern the specific behavior at each porosity scale on the overall adsorption, self-diffusion, and transport behavior in zeolites with dual micro/mesoporosities.

Synthesis of Hierarchically Structured Hybrid Materials by Controlled Self-Assembly of Metal-Organic Framework with Mesoporous Silica for CO2 Adsorption

The HKUST-1@SBA-15 composites with hierarchical pore structure were constructed by in situ self-assembly of metal-organic framework (MOF) with mesoporous silica. The structure directing role of SBA-15 had an obvious impact on the growth of MOF crystals, which in turn affected the morphologies and structural properties of the composites. The pristine HKUST-1 and the composites with different content of SBA-15 were characterized by XRD, N₂ adsorption-desorption, SEM, TEM, FT-IR, TG, XPS, and CO₂-TPD techniques. It was found that the composites were assembled by oriented growth of MOF nanocrystals on the surfaces of SBA-15 matrix. The interactions between surface silanol groups and metal centers induced structural changes and resulted in the increases in surface areas as well as micropore volumes of hybrid materials. Besides, the additional constraints from SBA-15 also restrained the expansion of HKUST-1, contributing to their smaller crystal sizes in the composites. The adsorption isotherms of CO₂ on the materials were measured and applied to calculate the isosteric heats of adsorption. The HS-1 composite exhibited an increase of 15.9% in CO₂ uptake capacity compared with that of HKUST-1. Moreover, its higher isosteric heats of CO₂ adsorption indicated the stronger interactions between the surfaces and CO₂ molecules. The adsorption rate of the composite was also improved due to the introduction of mesopores. Ten cycles of CO₂ adsorption-desorption experiments implied that the HS-1 had excellent reversibility of CO₂ adsorption. This study was intended to provide the possibility of assembling new composites with tailored properties based on MOF and mesoporous silica to satisfy the requirements of various applications.

Rapid and high-capacity ultrasonic assisted adsorption of ternary toxic anionic dyes onto MOF-5-activated carbon: Artificial neural networks, partial least squares, desirability function and isotherm and kinetic study

The present paper focused on the ultrasonic assisted simultaneous removal of fast green (FG), eosin Y (EY) and quinine yellow (QY) from aqueous media following using MOF-5 as a metal organic framework and activated carbon hybrid (AC-MOF-5). The structure and morphology of AC-MOF-5 was identified by SEM, FTIR and XRD analysis. The interactive and main effects of variables such as pH, initial dyes concentration (mgL^-1), adsorbent dosage (mg) and sonication time (min) on removal percentage were studied by central composite design (CCD), subsequent desirability function (DF) permit to achieved real variable experimental condition. Optimized values were found 7.06, 5.68, 7.59 and 5.04mgL^-1, 0.02g and 2.55min for pH, FG, EY and QY concentration, adsorbent dosage and sonication time, respectively. Under this conditions removal percentage were obtained 98.1%, 98.1% and 91.91% for FG, EY and QY, respectively. Two models, namely partial least squares (PLS) and multi-layer artificial neural network (ANN) model were used for building up to construct an empirical model to predict the dyes under study removal behavior. The obtained results show that ANN and PLS model is a powerful tool for prediction of under-study dyes adsorption by AC-MOF-5. The evaluation and estimation of equilibrium data from traditional isotherm models display that the Langmuir model indicated the best fit to the equilibrium data with maximum adsorption capacity of 21.230, 20.242 and 18.621mgg^-1, for FG, EY and QY, respectively, while the adsorption rate efficiently follows the pseudo-second-order model.

Understanding gas adsorption in MOF-5/graphene oxide composite materials

Metal–organic framework (MOF) and graphene oxide (GO) composite materials (MOF/GO) have been regarded as promising for separation applications due to their synergistically enhanced adsorption properties.

Facile Carbonization of Microporous Organic Polymers into Hierarchically Porous Carbons Targeted for Effective CO2 Uptake at Low Pressures

The advent of microporous organic polymers (MOPs) has delivered great potential in gas storage and separation (CCS). However, the presence of only micropores in these polymers often imposes diffusion limitations, which has resulted in the low utilization of MOPs in CCS. Herein, facile chemical activation of the single microporous organic polymers (MOPs) resulted in a series of hierarchically porous carbons with hierarchically meso-microporous structures and high CO2 uptake capacities at low pressures. The MOPs precursors (termed as MOP-7-10) with a simple narrow micropore structure obtained in this work possess moderate apparent BET surface areas ranging from 479 to 819 m(2) g(-1). By comparing different activating agents for the carbonization of these MOPs matrials, we found the optimized carbon matrials MOPs-C activated by KOH show unique hierarchically porous structures with a significant expansion of dominant pore size from micropores to mesopores, whereas their microporosity is also significantly improved, which was evidenced by a significant increase in the micropore volume (from 0.27 to 0.68 cm(3) g(-1)). This maybe related to the collapse and the structural rearrangement of the polymer farmeworks resulted from the activation of the activating agent KOH at high temperature. The as-made hierarchically porous carbons MOPs-C show an obvious increase in the BET surface area (from 819 to 1824 m(2) g(-1)). And the unique hierarchically porous structures of MOPs-C significantly contributed to the enhancement of the CO2 capture capacities, which are up to 214 mg g(-1) (at 273 K and 1 bar) and 52 mg g(-1) (at 273 K and 0.15 bar), superior to those of the most known MOPs and porous carbons. The high physicochemical stabilities and appropriate isosteric adsorption heats as well as high CO2/N2 ideal selectivities endow these hierarchically porous carbon materials great potential in gas sorption and separation.

Ultrasonically assisted hydrothermal synthesis of activated carbon-HKUST-1-MOF hybrid for efficient simultaneous ultrasound-assisted removal of ternary organic dyes and antibacterial investigation: Taguchi optimization

Activated carbon (AC) composite with HKUST-1 metal organic framework (AC-HKUST-1 MOF) was prepared by ultrasonically assisted hydrothermal method and characterized by FTIR, SEM and XRD analysis and laterally was applied for the simultaneous ultrasound-assisted removal of crystal violet (CV), disulfine blue (DSB) and quinoline yellow (QY) dyes in their ternary solution. In addition, this material, was screened in vitro for their antibacterial actively against Methicillin-resistant Staphylococcus aureus (MRSA) and Pseudomonas aeruginosa (PAO1) bacteria. In dyes removal process, the effects of important variables such as initial concentration of dyes, adsorbent mass, pH and sonication time on adsorption process optimized by Taguchi approach. Optimum values of 4, 0.02 g, 4 min, 10 mg L(-1) were obtained for pH, AC-HKUST-1 MOF mass, sonication time and the concentration of each dye, respectively. At the optimized condition, the removal percentages of CV, DSB and QY were found to be 99.76%, 91.10%, and 90.75%, respectively, with desirability of 0.989. Kinetics of adsorption processes follow pseudo-second-order model. The Langmuir model as best method with high applicability for representation of experimental data, while maximum mono layer adsorption capacity for CV, DSB and QY on AC-HKUST-1 estimated to be 133.33, 129.87 and 65.37 mg g(-1) which significantly were higher than HKUST-1 as sole material with Qm to equate 59.45, 57.14 and 38.80 mg g(-1), respectively.

Highly sensitive analysis of polycyclic aromatic hydrocarbons in environmental water with porous cellulose/zeolitic imidazolate framework-8 composite microspheres as a novel adsorbent coupled with high-performance liquid chromatography

In this work, novel cellulose/zeolitic imidazolate frameworks-8 composite microspheres have been successfully fabricated and utilized as sorbent for environmental polycyclic aromatic hydrocarbons efficient extraction and sensitive analysis. The composite microspheres were synthesized through the in situ hydrothermal growth of zeolitic imidazolate frameworks-8 on cellulose matrix, and exhibited favorable hierarchical structure with chemical composition as assumed through scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction patterns, and Brunauer-Emmett-Teller surface areas characterization. A robust and highly efficient method was then successfully developed with as-prepared composite microspheres as novel solid-phase extraction sorbent with optimum extraction conditions, such as sorbent amount, sample volume, extraction time, desorption conditions, volume of organic modifier, and ionic strength. The method exhibited high sensitivity with low limit of detection down to 0.1-1.0 ng/L and satisfactory linearity with correlation coefficients ranging from 0.9988 to 0.9999, as well as good recoveries of 66.7-121.2% with relative standard deviations less than 10% for environmental polycyclic aromatic hydrocarbons analysis. Thus, our method was convenient and efficient for polycyclic aromatic hydrocarbons extraction and detection, potential for future environmental water samples analysis.