Nickel oxide grafted andic soil for efficient cesium removal from aqueous solution: adsorption behavior and mechanisms

Layered metal sulfides with MaSbc- framework (M = Sb, In, Sn) as ion exchangers for the removal of Cs(Ⅰ) and Sr(Ⅱ) from radioactive effluents: a review

Nuclear power has emerged as a pivotal contributor to the global electricity supply owing to its high efficiency and low-carbon characteristics. However, the rapid expansion of the nuclear industry has resulted in the production of a significant amount of hazardous effluents that contain various radionuclides, such as 137Cs and 90Sr. Effectively removing 137Cs and 90Sr from radioactive effluents prior to discharge is a critical challenge. Layered metal sulfides exhibit significant potential as ion exchangers for the efficient uptake of Cs+ and Sr2+ from aqueous solutions owing to their open and exchangeable frameworks and the distinctive properties of their soft S2- ligands. This review provides a detailed account of layered metal sulfides with MaSb c- frameworks (M = Sb, In, Sn), including their synthesis methods, structural characteristics, and Cs+ and Sr2+ removal efficiencies. Furthermore, we highlight the advantages of layered metal sulfides, such as their relatively high ion exchange capacities, broad active pH ranges, and structural stability against acid and radiation, through a comparative evaluation with other conventional ion exchangers. Finally, we discuss the challenges regarding the practical application of layered metal sulfides in radionuclide scavenging.

Comparing Cs+ binding affinity of Keggin type polyoxometalate and sodium Tetrakis(4-florophenyl)borate in solution and from Cs-doped pure phase vermiculite

We assessed the aptitude of cesium (Cs⁺) binding by Keggin type polyoxometalates (POMs) and compared the results with the Cs⁺ binding by sodium tetrakis(4-fluorophenyl)-borate (Na-TFPB). In this work, we aimed to establish a system to treat radioactive Cs⁺ contaminated soil with POMs economically. We evaluated the effect of initial Cs⁺ concentration (0.1M) and precipitant (POMs and TFPB) concentrations (0.01M) on Cs⁺ precipitation. Our comparison of Cs⁺ precipitation by three different POMs and TFPB was obtained by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). We synthesized POMs molybdovanadophosphoric acid, H₅PMo₁₀V₂O₄₀ (MVPA), and silicotungstic acid, H₄SiW₁₂O₄₀ (STA), and used commercially available phosphotungstic acid, H₃PW₁₂O₄₀ (PTA), and TFPB. Cs-doped pure phase vermiculite was also used to demonstrate the extraction potential of Cs⁺ by TFPB, STA, and PTA. All the POMs and corresponding Cs-bound POMs were characterized by UV-visible spectroscopy, Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, and X-ray powder diffraction (XRD). In this simulation study, we demonstrated that the Cs⁺ removal by POMs is much more effective than TFPB and could be a promising method for the treatment of radiocesium contaminated soil.

Securely anchored Prussian blue nanocrystals on the surface of porous PAAm sphere for high and selective cesium removal

Prussian blue (PB) has been well known as a pigment crystal to selectively sequestrate the radioactive cesium ion released from aqueous solutions owing to PB cage size similar to the cesium ion. Because the small size of PB is hard to deal with, the adsorbents containing PB have been prepared in the form of composites causing low sequestration efficiency of cesium. In this study, securely anchored PB nanocrystals on the surface of millimeter-sized porous polyacrylamide (PAAm) spheres (PB@PAAm) have been prepared by the crystallization of PB on the Fe³⁺ adsorbed PAAm. The securely anchored PB nanocrystals have been demonstrated to be selective and efficient adsorbents for sequestration of the radioactive cesium. The well-interconnected-spherical pores and millimeter-sized diameter of the PB@PAAm adsorbents facilitated permeation of Cs⁺ into the adsorbent and ease of handling respectively. Especially the well-interconnected-spherical pores allowed that PB@PAAm showed 90% of its maximum Cs⁺ adsorption capacity within 30 min. The PB@PAAm showed an outstanding Cs⁺ capture ability of 374 mg/g, high removal efficiency of 85% even at low concentration of Cs⁺ (10 ng/L), and superior selectivity of Cs⁺ against interference ions of Na⁺, K⁺, Mg²⁺, and Ca²⁺.

Layered Thiostannates with Distinct Arrangements of Mixed Cations for the Selective Capture of Cs+, Sr2+, and Eu3+ Ions

The selective capture of radioactive cesium, strontium, and lanthanides from liquid nuclear waste is of great significance to environmental remediation and human health. Herein, the rapid and selective removal of Cs⁺, Sr²⁺, and Eu³⁺ ions is achieved by two metal sulfides (FJSM-SnS-2 and FJSM-SnS-3). Both structures feature [Sn₃S₇]_n^2n- layers with the mixed cations of [CH₃NH₃]⁺ and [Bmmim]⁺ (1-butyl-2,3-dimethylimidazolium) as templates. However, the ratios and arrangements of mixed cations in the interlayered spaces are distinct. It is unprecedented that [CH₃NH₃]⁺ and [Bmmim]⁺ in FJSM-SnS-2 are alternatingly arranged in different interlayered spaces, whereas they in FJSM-SnS-3 are located in the same interlayered spaces. It is the first time that the ionic liquid cation and protonated organic amine have been simultaneously incorporated into metal sulfides. Both compounds show high capacities, rapid kinetics, and a wide pH active range for Cs⁺, Sr²⁺, and Eu³⁺. Even under excess Na⁺ ions, both show excellent selectivity in capturing trace Sr²⁺ and Eu³⁺ ions. FJSM-SnS-3 presents the highest K_d^Eu to date. They still retain high removal efficiency even after intense β and γ radiation. Moreover, it is first confirmed by the in situ tracking method of mass spectrometry that the large-sized [Bmmim]⁺ ions are exchangeable. It is found that the arrangement of cations between interlayered spaces is a crucial factor affecting ion exchange performance. This work will likely change the consensus that large-sized organic cations are difficult to be exchanged and thus further highlight the great potential of metal sulfide ion exchangers for radionuclide remediation.

Nanostructured chitosan/molecular sieve-4A an emergent material for the synergistic adsorption of radioactive major pollutants cesium and strontium

A fresh adsorbent nanostructured chitosan/molecular sieve 4A hybrid (NSC@MS-4A) was fabricated for the rapid adsorption of strontium (Sr²⁺) and cesium (Cs⁺) ions from aqueous solutions. The as-obtained NSC@MS-4A were thoroughly characterized by XRD, FE-SEM, EDS, BET, XPS and FT-IR. The physio-chemical properties and structural aspects revealed that NSC@MS-4A acquires fine surface area (72 m²/g), porous structure as well as compatible functional groups (-P-O-P and -C-O-C) for the admission of Cs⁺ and Sr²⁺ ions. The batch adsorption studies concluded that prepared adsorbent displayed a maximum adsorption of 92-94 % within 40 min. Fast adsorption of Cs⁺ and Sr²⁺ was achieved at neutral pH (6-7), ambient temperature (25-30 °C) and slow agitation speed (50-60 rpm) which could propose vast benefits such as little power utilization and uncomplicated operation. Among six types of adsorption isotherms, Freundlich isotherm showed the best fit with R²>0.997. Pseudo-second order made a better agreement as compare to other kinetic models. The thermodynamic coefficients suggested the passage of Cs⁺ and Sr²⁺ ions through the liquid solid boundary is exothermic and spontaneous. The NSC@MS-4A displayed excellent regenerability properties over five repetitive adsorption/desorption cycles, which specified that as-obtained NSC@MS-4A is a sustainable as well as efficient adsorbent for practical decontamination of radioactive liquid waste.

Highly ordered macroporous silica dioxide framework embedded with supramolecular as robust recognition agent for removal of cesium

Owning to highly mechanical strength and non-interference effectivity, silica dioxide is often explored as a stable supporter commonly with mesopore. It is known that a macroporous framework has larger mass transfer channel, possibly beneficial to adsorption process. Herein highly ordered macroporous silica dioxide framework (homogeneous pore size of 194.20 nm) was synthesized and embedded with supramolecular (CC/OMS). Cs cation adsorption onto CC/OMS was explored under different pH (presence or absence of humic acid), initial cesium concentration, shaking time, competing ions. The robust cesium uptake capacity demonstrated by a theory adsorption amount of 150.01 mg/g highlighted unique CC/OMS properties combining large mass transfer channel and superior complex capacity of supramolecular. The adsorption was well fit with Langmuir and pseudo-second-order model. Sodium and potassium at a lower concentration showed little influence on cesium adsorption. The results demonstrated that CC/OMS was an alternative material for cesium capture from acidic aqueous solution.

Prussian blue-embedded carboxymethyl cellulose nanofibril membranes for removing radioactive cesium from aqueous solution

In this study, we synthesized a Prussian blue (PB)-embedded macroporous carboxymethyl cellulose nanofibril (CMCNF) membrane for facile cesium (Cs) removal. The PB was formed in situ at Fe³⁺ sites on a CMCNF framework cross-linked using FeCl₃ as a cross-linking agent. Cubic PB particles of size 5-20 nm were observed on the macroporous CMCNF membrane surface. The PB-CMCNF membrane showed 2.5-fold greater Cs adsorption capacity (130 mg/g_PB-CMCNF) than commercial PB nanoparticles, even though the PB loading of the PB-CMCNF membrane was less than 100 mg/g_PB-CMCNF. The macroporous structure of the CMCNF membrane led to improved diffusion in the solution, thereby increasing the Cs adsorption capacity. The Cs adsorption behavior was systematically investigated in different solution chemistry. Finally, ¹³⁷Cs removal using a semicontinuous adsorption module was demonstrated in real seawater. The results showed that the PB-CMCNF membrane is a highly effective, practical material for the removal of ¹³⁷Cs from aqueous environments.

Kinetic, equilibrium, and thermodynamic performance of sulfonamides adsorption onto graphene

With the extensive production and consumption of sulfonamide antibiotics, their existence in aquatic environments has received increasing attention due to their acute and chronic toxic effects. In this study, graphene was characterized and applied for sulfamethazine (SMT) removal from aqueous solution. The effect of the contact time (0-1440 min), initial concentration (2-100 mg L^-1), and temperature (298-318 K), as well as pH (2-9) and ionic strength (0-0.2 M NaNO₃), have been examined. The maximum adsorption capacity was calculated to be 104.9 mg g^-1 using the Langmuir model. The endothermic adsorption process (△H = 10.940 kJ mol^-1) was pH- and temperature-dependent, and the adsorption data fitted well with the Langmuir isothermal and the pseudo second-order kinetic models. Additionally, ionic strength (0.01 to 0.2 M NaNO₃) had no obvious influence on SMT adsorption by graphene. Ultimately, graphene proved to be an effective adsorbent for sulfonamide antibiotics removal from aqueous solutions.

Porous 3D Prussian blue/cellulose aerogel as a decorporation agent for removal of ingested cesium from the gastrointestinal tract

In the present study, we successfully synthesized a porous three-dimensional Prussian blue-cellulose aerogel (PB-CA) composite and used it as a decorporation agent for the selective removal of ingested cesium ions (Cs⁺) from the gastrointestinal (GI) tract. The safety of the PB-CA composite was evaluated through an in vitro cytotoxicity study using macrophage-like THP-1 cells and Caco-2 intestinal epithelial cells. The results revealed that the PB-CA composite was not cytotoxic. An adsorption study to examine the efficiency of the decorporation agent was conducted using a simulated intestinal fluid (SIF). The adsorption isotherm was fitted to the Langmuir model with a maximum Cs⁺ adsorption capacity of 13.70 mg/g in SIF that followed pseudo-second-order kinetics. The PB-CA composite showed excellent stability in SIF with a maximum Cs⁺ removal efficiency of 99.43%. The promising safety toxicology profile, remarkable Cs⁺ adsorption efficacy, and excellent stability of the composite demonstrated its great potential for use as an orally administered drug for the decorporation of Cs⁺ from the GI tract.

Investigation of nanoscale zerovalent iron-based magnetic and thermal dual-responsive composite materials for the removal and detection of phenols

In this study, well-defined magnetic and thermal dual-responsive nanomaterials were synthesized, which contained ultrafine core-shell Fe@SiO₂ nanoparticles as magnetic core and poly(N-isopropylacrylamide) (PNIPAM) as thermosensitive outer shell. The fabricated nanoparticles were characterized and investigated for the adsorption of four phenolic compounds, including bisphenol A (BPA), tetrabromobisphenol A (TBBPA), 4-tert-octylphenol (4-OP) and 4-n-nonylphenol (4-NP). The experimental results demonstrated that the excellent adsorption rates were attributed to hydrophobic effect, hydrogen-bonding interaction, and electrostatic attraction. The adsorption process followed pseudo-second-order kinetics model and nonlinear isotherms, indicating heterogeneous adsorption process. The adsorption efficiency of 4-NP using Fe@SiO₂@PNIPAM was more than 90% under optimized condition within 2 h. The determined maximum adsorption amounts of BPA, TBBPA, 4-OP and 4-NP were 2.43, 6.83, 24.75, and 49.34 mg g^-1, respectively. Meanwhile, a magnetic solid phase extraction (MSPE) method with Fe@SiO₂@PNIPAM was established to determine these four compounds simultaneously. Under the optimal conditions, the linearity ranges were in the range of 2-200, 2-300, 2-100 and 2-100 μg L^-1 for BPA, 4-OP, TBBPA, and 4-NP, respectively, and the detection limits were in the range of 0.58-0.76 μg L^-1, respectively. The applicability of the proposed method was evaluated by analyzing three fresh water samples, and satisfactory spiked recoveries in the range 70.9-119.9% were achieved. It was proved that these adsorbents could be easily collected and recycled owing to the appropriate magnetism. The results also demonstrated that the as-prepared adsorbents had promising potential in the enrichment and analysis of detrimental organic pollutants from water.

Selective removal of cesium by ammonium molybdophosphate - polyacrylonitrile bead and membrane

The selective removal of radionuclides with extremely low concentrations from environmental medium remains a big challenge. Ammonium molybdophosphate possess considerable selectivity towards cesium ion (Cs⁺) due to the specific ion exchange between Cs⁺ and NH₄⁺. Ammonium molybdophosphate - polyacrylonitrile (AMP-PAN) membrane was successfully prepared for the first time in this study. Efficient removal of Cs⁺ (95.7%, 94.1% and 91.3% of 1mgL^-1) from solutions with high ionic strength (400mgL^-1 of Na⁺, Ca²⁺ or K⁺) was achieved by AMP-PAN composite. Multilayer chemical adsorption process was testified through kinetic and isotherm studies. The estimated maximum adsorption capacities even reached 138.9±21.3mgg^-1. Specifically, the liquid film diffusion was identified as the rate-limiting step throughout the removal process. Finally, AMP-PAN membrane could eliminate Cs⁺ from water effectively through the filtration adsorption process.

Ion-recognizable hydrogels for efficient removal of cesium ions from aqueous environment

At present, selective and efficient removal of cesium ions (Cs⁺) from nuclear waste is of significant importance but still challenging. In this study, an easy-to-get and low-cost hydrogel adsorbent has been developed for effective adsorption and removal of Cs⁺ from aqueous environment. The novel Cs⁺-recognizable poly(acrylic acid-co-benzo-18-crown-6-acrylamide) (poly(AAc-co-B18C6Am)) hydrogel is specifically designed with a synergistic effect, in which the AAc units are designed to attract Cs⁺ via electrostatic attraction and the B18C6Am units are designed to capture the attracted Cs⁺ by forming stable 2:1 "sandwich" complexes. The poly(AAc-co-B18C6Am) hydrogels are simply synthesized by thermally initiated free-radical copolymerization and display excellent Cs⁺ adsorption from commonly coexisting metal ions. Important parameters affecting the adsorption are investigated comprehensively, and the adsorption kinetics and adsorption isotherms are also discussed systematically. The poly(AAc-co-B18C6Am) hydrogels exhibit rapid Cs⁺ adsorption within 30min and the adsorption process is governed by the pseudo-second order model. Adsorption isotherm results demonstrate that the equilibrium data are well fitted by the Langmuir isotherm model, indicating that the Cs⁺ adsorption is probably a monolayer adsorption process. Such Cs⁺-recognizable hydrogel materials based on the host-guest complexation are promising as efficient and feasible candidates for adsorption and removal of radioactive Cs⁺ from nuclear contaminants.

Synthesis of crystalline molybdenum oxides based on a 1D molecular structure and their ion-exchange properties

Crystalline molybdotellurate based on a 1D molecular structure exhibits interesting ion-exchange properties with both inorganic and organic cations.

Remediation of radiocesium-contaminated liquid waste, soil, and ash: a mini review since the Fukushima Daiichi Nuclear Power Plant accident

The radiation contamination after the Fukushima Daiichi Nuclear Power Plant accident attracts considerable concern all over the world. Many countries, areas, and oceans are greatly affected by the emergency situation other than Japan. An effective remediation strategy is in a highly urgent demand. Though plenty of works have been carried out, progressive achievements have not yet been well summarized. Here, we review the recent advances on the remediation of radiocesium-contaminated liquid waste, soil, and ash. The overview of the radiation contamination is firstly given. Afterwards, the current remediation strategies are critically reviewed in terms of the environmental medium. Special attentions are paid on the adsorption/ion exchange and electrically switched ion exchange methods. Finally, the present review outlines the possible works to do for the large-scale application of the novel remediation strategies.

Prussian blue functionalized microcapsules for effective removal of cesium in a water environment

In this work, a novel non-toxic and effective adsorbent, Prussian blue functionalized microcapsules (PB-MCs) was first developed for the highly efficient removal of cesium ions by flotation separation from aqueous solutions.

Effects of inorganic electrolyte anions on enrichment of Cu(II) ions with aminated Fe3O4/graphene oxide: Cu(II) speciation prediction and surface charge measurement

The present work evaluated the effects of six inorganic electrolyte anions on Cu(II) removal using aminated Fe3O4/graphene oxide (AMGO) in single- and multi-ion systems. A 2(6-2) fractional factorial design (FFD) was employed for assessing the effects of multiple anions on the adsorption process. The results indicated that the Cu(II) adsorption was strongly dependent on pH and could be significantly affected by inorganic electrolyte anions due to the changes in Cu(II) speciation and surface charge of AMGO. In the single-ion systems, the presence of monovalent anions (Cl(-), ClO4(-), and NO3(-)) slightly increased the Cu(II) adsorption onto AMGO at low pH, while the Cu(II) adsorption was largely enhanced by the presence of SO4(2-), CO3(2-), and HPO4(2-). Based on the estimates of major effects and interactions from FFD, the factorial effects of the six selected species on Cu(II) adsorption in multi-ion system were in the following sequence: HPO4(2-)>CO3(2-)>Cl(-)>SO4(2-)>NO3(-)=ClO4(-), and the combined factors of AD (Cl(-)×SO4(2-)) and EF (Cl(-)×SO4(2-)) had significant effects on Cu(II) removal.