Recyclable graphene oxide-supported titanium dioxide photocatalysts with tunable properties

Ternary Graphene Oxide and Titania Nanoparticles-Based Nanocomposites for Dye Photocatalytic Degradation: A Review

Advanced oxidation processes stand as green alternatives for the decontamination of waste waters. Photocatalysis is an advanced oxidation process in which a semiconductor material absorbs photon energy and triggers redox reactions capable of degrading organic pollutants. Titanium dioxide (TiO2, titania) represents one of the most popular choices of photocatalytic materials, however the UV-activation of its anatase phase and its high charge recombination rate decrease its photocatalytic activity and weaken its potential. Graphene oxide is a 2D carbon nanomaterial consisting of exfoliated sheets of hexagonally arranged carbons decorated with oxygen- and hydrogen- functional groups. Composite nanomaterials consisting of titania nanoparticles and graphene oxide have proven to enhance the photocatalytic activity of pure TiO2. In this review, we present a thorough literature review of ternary nanocomposites based on synthesized or commercial titania nanoparticles and GO (or reduced GO) particularly used for the photodegradation of dyes. GO/TiO2 has been enriched primarily with metals, semiconductors and magnetic nanomaterials, proving a superior dye degradation performance and reusability compared to bare TiO2. Ongoing challenges and perspectives are outlined.

Novel cubical Ag(NP) decorated titanium dioxide supported bentonite thin film in the efficient removal of bisphenol A using visible light

The persistent endocrine-disrupting chemical bisphenol A is posing serious health concerns; hence, it is known to be an emerging and potential water contaminant. The present investigation aims to synthesize novel cubical Ag(NP) decorated titanium dioxide-supported bentonite (Ag/TiO₂@Clay) nanocomposite using a novel synthetic process. The nanocomposite materials were characterized by several analytical methods viz., transmission electron microscopy (TEM), X-ray diffraction (XRD) analyses, energy-dispersive X-ray spectroscopy (EDX), atomic force microscopy (AFM), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) and diffuse reflectance spectroscopy (DRS). Further, the photocatalytic removal of bisphenol A was conducted utilizing the thin film catalyst under the LED (light emitting diode; visible light) and UV-A (ultra violet-A) light sources. The parametric studies solution pH (6.0-12.0), pollutant concentrations (1.0-20.0 mg/L), and the interaction of several scavengers and co-existing ions are studied extensively to demonstrate the insights of the removal mechanism. The mineralization of bisphenol A and repeated use of the thin film catalyst showed the potential usage of photocatalysts in the devised large-scale operations. Similarly, the natural matrix treatment was performed to evaluate the suitability of the process for real implications.

Novel nanocomposite thin film in the efficient removal of antibiotics using visible light: Insights of photocatalytic reactions and stability of thin film in real water implications

Novel clay (bentonite) supported Ag⁰ nanoparticles (NPs) doped TiO₂ nanocomposite (Clay/TiO₂/Ag⁰(NPs)) thin film was obtained by using template synthesis method. The nanocomposite material is decorated with cubical Ag⁰(NPs) and utilised successfully in the photocatalytic degradation of tetracycline (TC) and sulfamethazine (SMZ) from aqueous solutions utilizing visible light and UV-A radiations. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS) analyses were used to characterise the nanocomposite materials. Diffusion reflectance spectroscopy (DRS) was utilised to determine the bandgap energies of the materials and also to confirm that Ag⁰(NPs) was successfully doped with TiO₂. The nanocomposite material showed highly efficient photocatalytic activity for the breaking down of TC/SMZ under visible light irradiation by the enhanced electron-hole separation and adsorption of antibiotics at the vicinity of the catalyst. The oxidative degradation of TC/SMZ were shown to be highly dependent on the pH, initial concentration of TC/SMZ, and various co-existing ions. Reusability test of Clay/Ag⁰(NPs)/TiO₂ nanocomposite revealed that the activity did not decline with repeated use. Treatment of TC and SMZ in real water system further enhanced the application potential of the novel catalysts for the treatment of full-scale wastewater polluted with these antibiotics.

Synthesis and enhanced photocatalytic application of porous nanocomposites of (r)GO/TiO2 embedded HCP (hyper crosslinked polymer)

Nanocomposites (r)GO/TiO₂/hyper crosslinked polymer (HCP) were prepared using ultrasonic-assisted method, and identified by (SEM), (EDS), (TEM), and (XRD) techniques. This study was performed to examine the effect of various operating parameters on photocatalytic degradation of Rhodamine B (Rh.B) over (r)GO/TiO₂ embedded HCP followed by an optimization study using response surface methodology (RSM) based on Box-Behnken design (BBD). The photocatalytic activity of rGO/TiO₂/polycalix[4]resorcinarene ((r)GTP) was evaluated using the cationic dye Rhodamine B as a pollutant model under solar light (intensity = 850 W/m²) between 10 and 12 am, June, Ahvaz, Iran. Response Surface Methodology was adopted for the optimization of degradation parameters viz pH, dye concentration, and nanocomposites dosage and contact time. The optimum values for the maximum Rhodamine B (Rh B) degradation of rGO/TiO₂/polycalix (rGTP) and GTP were obtained, in which the degradation of rGTP was 100% and the degradation efficiency of GO/TiO₂/polycalix (GTP) was 70%. ANOVA analysis results demonstrated that irradiation time and nanocomposite mass were the most significant parameters. It was found that rGO/TiO₂/polycalix[4]resorcinarene (rGTP) nanocomposite displayed the best degradation yield for the dye. The results showed that the rGTP nanocomposite displayed good EIS and CV properties besides being eco-friendly and reusable. It could also show a high capacity for the elimination of the dye in the industrial wastewaters.

Removal of Organic Pollutants with Polylactic Acid-Based Nanofiber Composites

In the process of using nano-titanium dioxide (TiO2) photocatalytic treatment of organic polluted liquid, the easy aggregation and recycling difficulty of nano-TiO2 particles are important problems that cannot be avoided. Anchoring nano-TiO2 to the substrate not only limits the aggregation of nano-TiO2, but also facilitates the easy removal and reuse of nano-TiO2 after processing. Herein, coaxial electrospun nanofibrous (NFs) made of L-polylactic acid (PLLA) and chitosan (CS) are coated with graphene oxide (GO) and TiO2 for the enhanced oxidation of organic pollutants. The adsorption and photocatalysis experiment results show that, for methyl orange (MO) dye solution, the saturated removal of MO by PLLA/CS, PLLA/CS-GO and PLLA/CS-GO/TiO2 nanofibers are 60.09 mg/g, 78.25 mg/g and 153.22 mg/g, respectively; for the Congo red (CR) dye solution, the saturated removal of CR by PLLA/CS, PLLA/CS-GO and PLLA/CS-GO/TiO2 nanofiber materials were 138.01 mg/g, 150.22 mg/g and 795.44 mg/g, respectively. These three composite nanofiber membrane materials can maintain more than 80% of their adsorption capacity after four repeated cycles. They are environmentally friendly and efficient organic pollution remediation materials with promising application.

Ag@TiO2 Nanocomposite as an Efficient Catalyst for Knoevenagel Condensation

In the present study, a new series of different heterocycles was synthesized through base-free Knoevenagel condensation of various aldehydes and active methylene-containing compounds using the hydrothermal developed Ag@TiO₂ as a heterogeneous catalyst. The catalyst was synthesized by mixing TiO₂ (P25) with AgNO₃ and hydrothermally treated in ethanol at 180 °C for 12 h. The developed Ag@TiO₂ catalyst was directly applied for Knoevenagel condensation, and the optimized procedure involved stirring the aldehydes and active methylene-containing compounds with Ag@TiO₂ in ethanol at 65 °C. The reaction scope was investigated for various aromatic and heterocyclic aldehydes with active methylene-containing compounds, and the isolated yields were significantly high. The reusability of the catalyst was investigated for up to five cycles, where an insignificant decrease in the catalyst's reactivity was observed. Also, the reaction could proceed in water as a solvent, and the isolated yield was 40%. Hence, this protocol features mild reaction conditions, a facile procedure, and clean reaction profiles.

Chirally modified cobalt-vanadate grafted on battery waste derived layered reduced graphene oxide for enantioselective photooxidation of 2-naphthol: Asymmetric induction through non-covalent interaction

The cobalt oxide-vanadium oxide (Co₃O₄-V₂O₅) combined with reduced graphene oxide (rGO) having band gap of ∼ 3.3 eV appeared as a suitable photocatalyst for selective oxidation of 2-naphthol to BINOL. C2-symmetric BINOL was achieved with good yield using hydrogen peroxide as the oxidant under UV-light irradiation. The same catalyst was chirally modified with cinchonidine and a newly synthesized chiral Schiff base ligand having a sigma-hole center. The strong interaction of the chiral modifiers with the cobalt-vanadium oxide was truly evident from various spectroscopic studies and DFT calculations. The chirally modified mixed metal oxide transformed the oxidative CC coupling reaction with high enantioselectivity. High enantiomeric excess upto 92 % of R-BINOL was obtained in acetonitrile solvent and hydrogen peroxide as the oxidant. A significant achievement was the formation of S-BINOL in the case of the cinchonidine modified catalyst and R-BINOL with the Schiff base ligand anchored chiral catalyst. The UV-light induced catalytic reaction was found to involve hydroxyl radical as the active reactive species. The spin trapping ESR and fluorescence experiment provided relevant evidence for the formation of such species through photodecomposition of hydrogen peroxide on the catalyst surface. The chiral induction to the resultant product was found to induce through supramolecular interaction like OH…π, H…Br interaction. The presence of sigma hole center was believed to play significant role in naphtholate ion recognition during the catalytic cycle.

Titanium Dioxide-Based Photocatalysts for Degradation of Emerging Contaminants including Pharmaceutical Pollutants

Contamination of the environment has been a growing problem in recent years. Due to the rapid growth in human population, the expansion of cities, along with the development of industry, more and more dangerous chemicals end up in the environment, especially in soil and water. For the most part, it is not possible to effectively remove chemicals through traditional remediation techniques, because those used in treatment plants are not specifically designed for this purpose. Therefore, new approaches for water remediation are in great demand. Many efforts have been focused on applications of photocatalysis for the remediation of chemical pollutants including drugs. Titanium(IV) oxide nanoparticles have particularly been considered as potential photocatalysts due to their favorable properties. In this article, we present the problem of emerging contaminants including drugs and discuss the use of photocatalysts based on titanium(IV) oxide nanoparticles for their degradation. A wide selection of materials, starting from bare TiO2, via its hybrid and composite materials, are discussed including those based on carbonaceous materials or connections with macrocyclic structures. Examples of photodegradation experiments on TiO2-based materials including those performed with various active pharmaceutical ingredients are also included.

TiO2 (Core)/Crumpled Graphene Oxide (Shell) Nanocomposites Show Enhanced Photodegradation of Carbamazepine

The presence of pharmaceuticals and personal care products (PPCPs) in aquatic systems is a serious threat to human and ecological health. The photocatalytic degradation of PPCPs via titanium oxide (TiO2) is a well-researched potential solution, but its efficacy is limited by a variety of environmental conditions, such as the presence of natural organic macromolecules (NOM). In this study, we investigate the synthesis and performance of a novel photoreactive composite: a three-dimensional (3D) core (TiO2)-shell (crumpled graphene oxide) composite (TiGC) used as a powerful tool for PPCP removal and degradation in complex aqueous environments. TiGC exhibited a high adsorption capacity (maximum capacity 11.2 mg/g, 100 times larger than bare TiO2) and a 30% enhancement of photodegradation (compared to bare TiO2) in experiments with a persistent PPCP model, carbamazepine (CBZ). Furthermore, the TiGC performance was tested under various conditions of NOM concentration, light intensity, CBZ initial concentration, and multiple cycles of CBZ addition, in order to illustrate that TiGC performance is stable over a range of field conditions (including NOM). The enhanced and stable performance of TiCG to adsorb and degrade CBZ in water extends from its core-shell composite nanostructure: the crumpled graphene oxide shell provides an adsorptive surface that favors CBZ sorption over NOM, and optical and electronic interactions between TiO2 and graphene oxide result in higher hydroxyl radical (•OH) yields than bare TiO2.

New insights on the enhanced non-hydroxyl radical contribution under copper promoted TiO2/GO for the photodegradation of tetracycline hydrochloride

TiO₂/graphene oxide (GO) as photocatalyst in the photo-degradation of multitudinous pollutants has been extensively studied. But its low photocatalytic efficiency is attributed to the high band gap energy which lead to low light utilization. Cu-TiO₂/GO was synthesized via the impregnation methods to enhance the catalytic performance. The Cu-TiO₂/GO reaction rate constant for photo-degradation of pollutants (tetracycline hydrochloride, TC) was about 1.4 times that of TiO₂/GO. In 90 min, the removal ratio of Cu-TiO₂/GO for TC was 98%, and the maximum degradation ratio occurred at pH 5. After five cycles, the removal ratio of Cu-TiO₂/GO still exceeded 98%. UV-visible adsorption spectra of Cu-TiO₂/GO showed that its band gap was narrower than TiO₂/GO. Electron paramagnetic resonance (EPR) spectra test illustrated the generation rate of •O₂^- and •OH was higher in Cu-TiO₂/GO system than TiO₂/GO and TiO₂ system. The contribution sequence of oxidative species was •O₂^- > holes (h⁺) > •OH in both TiO₂/GO and Cu-TiO₂/GO system. Interestingly, the contribution of •OH in Cu-TiO₂/GO was less than that in TiO₂/GO during the photo-degradation process. This phenomenon was attributed to the better adsorption performance of Cu-TiO₂/GO which could reduce the accessibility of TC to •OH in liquid. The enhanced non‑hydroxyl radical contribution could be attributed to that the more other active species or sites on (nearby) the surface of Cu-TiO₂/GO generated after doping Cu. These results provide a new perspective for the tradition metal-doped conventional catalysts to enhance the removal of organic pollutants in the environment.

Reduced graphene oxide-TiO2/sodium alginate 3-dimensional structure aerogel for enhanced photocatalytic degradation of ibuprofen and sulfamethoxazole

In this study, graphene oxide and titanium dioxide in combination with sodium alginate were used to synthesize the reduced graphene oxide-TiO₂/sodium alginate (RGOT/SA) aerogel. The potential of RGOT/SA aerogel was evaluated for the photocatalytic degradation of ibuprofen and sulfamethoxazole and was compared with that of bare titanium dioxide nanoparticles. More than 99% removal of both the contaminants was obtained within 45-90 min by using the RGOT/SA aerogel under UV-A light. Mineralization of both the pollutants was also higher in case of RGOT/SA aerogel as compared to bare TiO₂ nanoparticles. The optimal mass ratio of TiO₂ nanoparticles with respect to graphene oxide was 2:1 in RGOT/SA aerogel in the presence of 1 wt% sodium alginate solution. High photodegradation of Ibuprofen was observed at neutral pH and acidic to neutral pH was found suitable for the photodegradation of sulfamethoxazole. Three-dimensional interconnected macroporous assembly, large surface area for settling TiO₂ nanoparticles, efficient charge partitioning, and enhanced physical and chemical adsorption of ibuprofen and sulfamethoxazole on the surface of RGOT/SA aerogel were the significant characteristics of RGOT/SA aerogels. Moreover, ease of separation and recyclability of the RGOT/SA aerogel could further save the extra energy used to separate nanoparticles from the effluent.

An Overview on Graphene-Metal Oxide Semiconductor Nanocomposite: A Promising Platform for Visible Light Photocatalytic Activity for the Treatment of Various Pollutants in Aqueous Medium

Graphene is one of the most favorite materials for materials science research owing to its distinctive chemical and physical properties, such as superior conductivity, extremely larger specific surface area, and good mechanical/chemical stability with the flexible monolayer structure. Graphene is considered as a supreme matrix and electron arbitrator of semiconductor nanoparticles for environmental pollution remediation. The present review looks at the recent progress on the graphene-based metal oxide and ternary composites for photocatalysis application, especially for the application of the environmental remediation. The challenges and perspectives of emerging graphene-based metal oxide nanocomposites for photocatalysis are also discussed.

Assessment comparison of commercial TiO2 and TiO2 sol-gel on the degradation of caffeine using artificial radiation

The presence of endocrine disrupting compounds in water receptor bodies, such as drugs, currently has in scientific field a great focus of studies focused on advanced water treatment techniques that enable the decontamination of water sources and public supply. In this context, this study focused on the characterization and evaluation of photocatalytic activity of catalysts calcined and uncalcined synthesized TiO₂ and the commercial sol-gel route from caffeine degradation. The photocatalysts were characterized by N₂ physisorption, X-ray diffraction, scanning electron microscopy (SEM/EDS), photoacoustic spectroscopy, and infrared spectroscopy (FTIR). They seek to evaluate the main textural, structural, chemical, and morphological differences that the method of synthesis can promote in obtaining a titanium oxide-based catalyst. Thus, the results of this study demonstrate that the synthesis method significantly influences the activity of the materials and that calcined TiO₂ catalyst prepared using the sol-gel method has promising photocatalytic capabilities for the elimination of drugs such as caffeine when present in wastewater.

Localized Building Titania-Graphene Charge Transfer Interfaces for Enhanced Photocatalytic Performance

Achieving high photocatalytic activity of titania-graphene composites calls for well-controlled titania size and efficient charge transfer interfaces. However, it is rather difficult because of easy restacking of graphene sheets and random nucleation and growth of titania nanoparticles in solution. Here, we reported a facile way to control the TiO₂ sizes and interfaces by localizing the nucleation and growth of titania on graphene sheets, which prohibits both restacking of graphene and random growth of TiO₂. As a result, a composite with controllably less than 10-nm-sized TiO₂ nanoparticles evenly distributed on thin graphene sheets was achieved. Thanks to the small size of titania and efficient charge transfer interfaces, the TiO₂/graphene composite exhibits a significant enhancement of photocatalytic H₂ evolution activity, reaching 1.35 mmol g^-1 h^-1. Furthermore, the composite also shows high photocatalytic activity on dye degradation under visible light illumination.

Hummers' and Brodie's graphene oxides as photocatalysts for phenol degradation

Undoped metal-free graphene oxide (GO) materials prepared by either a modified Hummers' (GO-H) or a Brodie's (GO-B) method were tested as photocatalysts in aqueous solution for the oxidative conversion of phenol. In the dark, the adsorptive capacity of GO-B towards phenol (~35%) was higher than that of GO-H (~15%). Upon near-UV/Vis irradiation, GO-H was able to remove 21% of phenol after 180 min, mostly through adsorption. On the other hand, by using less energetic visible irradiation, GO-B removed as much as 95% in just 90 min. By thorough characterization of the prepared materials (SEM, HRTEM, TGA, TPD, Raman, XRD, XPS and photoluminescence) the observed performances could be explained in terms of their different surface chemistries. The GO-B presents the lower concentration of oxygen functional groups (in particular carbonyl groups as revealed by XPS) and it has a considerably higher photocatalytic activity compared to GO-H. Photoluminescence (PL) of liquid dispersions and XRD analysis of powders showed lower PL intensity and smaller interlayer distance for GO-B relative to GO-H, respectively: this suggests lower electron-hole recombination and enhanced electron transfer in GO-B, in support of its boosted photocatalytic activity. Reusability tests showed no efficiency loss after a second usage cycle and over three runs under visible irradiation, which was in line with the similarity of the XPS spectra of the fresh and used GO-B materials. Moreover, scavenging studies revealed that holes and hydroxyl radicals were the main reactive species in play during the photocatalytic process. The obtained results, establish for the first time, that GO prepared by Brodie's method is an active and stable undoped metal-free photocatalyst for phenol degradation in aqueous solutions, opening new paths for the application of more sustainable and metal-free materials for water treatment solutions.

Photocatalytic Degradation of Pharmaceuticals Carbamazepine, Diclofenac, and Sulfamethoxazole by Semiconductor and Carbon Materials: A Review

The presence of pharmaceutical compounds in the environment is a reality that calls for more efficient water treatment technologies. Photocatalysis is a powerful technology available but the high energy costs associated with the use of UV irradiation hinder its large scale implementation. More sustainable and cheaper photocatalytic processes can be achieved by improving the sunlight harvesting and the synthesis of semiconductor/carbon composites has proved to be a promising strategy. Carbamazepine, diclofenac, and sulfamethoxazole were selected as target pharmaceuticals due to their recalcitrant behavior during conventional wastewater treatment and persistence in the environment, as properly reviewed. The literature data on the photocatalytic removal of carbamazepine, diclofenac, and sulfamethoxazole by semiconductor/carbon materials was critically revised to highlight the role of the carbon in the enhanced semiconductor performance under solar irradiation. Generally it was demonstrated that carbon materials induce red-shift absorption and they contribute to more effective charge separation, thus improving the composite photoactivity. Carbon was added as a dopant (C-doping) or as support or doping materials (i.e., nanoporous carbons, carbon nanotubes (CNTs), graphene, and derived materials, carbon quantum dots (CQDs), and biochars) and in the large majority of the cases, TiO₂ was the semiconductor tested. The specific role of carbon materials is dependent on their properties but even the more amorphous forms, like nanoporous carbons or biochars, allow to prepare composites with improved properties compared to the bare semiconductor. The self-photocatalytic activity of the carbon materials was also reported and should be further explored. The removal and mineralization rates, as well as degradation pathways and toxicity of the treated solutions were also critically analyzed.

Graphene oxide mediated thiolation of indoles in water: a green and sustainable approach to synthesize 3-sulfenylindoles

Graphene oxide, a green and recyclable catalyst, was developed to synthesize 3-sulfenylindoles in water.

Photocatalytic Degradation of Caffeine in a Solar Reactor System

In this paper, solar photodegradation of caffeine in aqueous solution was studied, this organic compound is the most consumed stimulant around the world. The degradation experiments were carried outdoors in a solar reactor and Evonik-Degussa P25 TiO2was used as catalyst. The photochemical and photocatalytic effect were tested in aqueous solutions of caffeine. Experimental results indicate that the organic compound is easily degraded over a very short period of time using 0.5 g L-1of catalyst. The kinetic analysis indicates that the initial reaction rate of caffeine is described by the LH-HW model. However, the original compound cannot be mineralized very fast, caffeine is converted to other organic compounds with a longer lifetime before the mineralization, converting caffeine CO2and water.

Titanium Dioxide/Graphene and Titanium Dioxide/Graphene Oxide Nanocomposites: Synthesis, Characterization and Photocatalytic Applications for Water Decontamination

The use of titanium dioxide, TiO2 as a photocatalyst in water decontamination has witnessed continuous interest due to its efficiency, stability, low toxicity and cost-effectiveness. TiO2 use is limited by its large band gap energy leading to light absorbance in the UV region of the spectrum, and by the relatively fast rate of recombination of photogenerated electrons and positive holes. Both limitations can be mitigated by using carbon-TiO2 nanocomposites, such as those based on graphene (G) and graphene oxide (GO). Relative to bare TiO2, these nanocomposites have improved photocatalytic activity and stability under the UV–visible light, constituting a promising way forward for improved TiO2 photocatalytic performance. This review focuses on the recent developments in the chemistry of TiO2/G and TiO2/GO nanocomposites. It addresses the mechanistic fundamentals, briefly, of TiO2 and TiO2/G and TiO2/GO photocatalysts, the various synthesis strategies for preparing TiO2/G and TiO2/GO nanocomposites, and the different characterization techniques used to study TiO2/G and TiO2/GO nanocomposites. Some applications of the use of TiO2/G and TiO2/GO nanocomposites in water decontamination are included.

Photodegradation of pharmaceuticals and personal care products in water treatment using carbonaceous-TiO2 composites: A critical review of recent literature

The high concentrations of pharmaceuticals and personal care products (PPCP) that found in water in many locations are of concern. Among the available water treatment methods, heterogeneous photocatalysis using TiO₂ is an emerging and viable technology to overcome the occurrence of PPCP in natural and waste water. The combination of carbonaceous materials (e.g., activated carbon, carbon nanotubes and graphene nanosheets) with TiO₂, a recent development, gives significantly improved performance. In this article, we present a critical review of the development and fabrication of carbonaceous-TiO₂ and its application to PPCP removal including its influence on water chemistry, and the relevant operational parameters. Finally, we present an analysis of current priorities in the ongoing research and development of carbonaceous-TiO₂ for the photodegradation of PPCP.

Nanomaterials for treating emerging contaminants in water by adsorption and photocatalysis: Systematic review and bibliometric analysis

Emerging contaminants in the aquatic environment have become a worldwide problem. Conventional wastewater treatment processes are ineffective for eliminating the emerging contaminants at trace concentrations. Nanomaterials possessing novel size-dependent properties, however, have shown great potential for removing these contaminants. Herein we reviewed nanomaterials reported for removing emerging contaminants by adsorption and/or photocatalysis, and their removal capacity, mechanism, and influencing factors are discussed. Meanwhile, a large-scale bibliometric analysis is conducted on the trends of the emerging contaminants, nanoadsorbents, nanophotocatalysts, and related research topics from the literature during 1998-2017.

Graphene-based materials supported advanced oxidation processes for water and wastewater treatment: a review

Advanced oxidation processes (AOPs) received much attention in the field of water and wastewater treatment due to its ability to mineralize persistent organic pollutants from water medium. The addition of graphene-based materials increased the efficiency of all AOPs significantly. The present review analyzes the performance of graphene-based materials that supported AOPs in detail. Recent developments in this field are highlighted. A special focus has been awarded for the performance enhancement mechanism of AOPs in the presence of graphene-based materials.

Environmental Electrokinetics for a sustainable subsurface

Soil and groundwater are key components in the sustainable management of the subsurface environment. Source contamination is one of its main threats and is commonly addressed using established remediation techniques such as in-situ chemical oxidation (ISCO), in-situ chemical reduction (ISCR; most notably using zero-valent iron [ZVI]), enhanced in-situ bioremediation (EISB), phytoremediation, soil-washing, pump-and-treat, soil vapour extraction (SVE), thermal treatment, and excavation and disposal. Decades of field applications have shown that these techniques can successfully treat or control contaminants in higher permeability subsurface materials such as sands, but achieve only limited success at sites where low permeability soils, such as silts and clays, prevail. Electrokinetics (EK), a soil remediation technique mostly recognized in in-situ treatment of low permeability soils, has, for the last decade, been combined with more conventional techniques and can significantly enhance the performance of several of these remediation technologies, including ISCO, ISCR, EISB and phytoremediation. Herein, we discuss the use of emerging EK techniques in tandem with conventional remediation techniques, to achieve improved remediation performance. Furthermore, we highlight new EK applications that may come to play a role in the sustainable treatment of the contaminated subsurface.

A biomass carbon mass coated with modified TiO2 nanotube/graphene for photocatalysis

A floating mass constructed with fungus and Fe/N-TNTs/NG for the photocatalysis on the surface of solution.

Novel fungal hyphae/Fe3O4 and N-TiO2/NG composite for adsorption and photocatalysis

A new strategy enables TiO₂ particles to be suspended in solution by constructing a three-layer structure of FH, FH/Fe₃O₄, and FH/N-TiO₂/NG.

A Green Approach to the Synthesis of Reduced Graphene Oxide using Sodium Humate

A green and simple chemistry approach was demonstrated to prepare reduced graphene oxide (rGO) using sodium humate (SH) as the reducing agent. Without using toxic and harmful chemicals, this method is environmentally friendly and suitable for the large-scale production of graphene. At first, the improved Hummers method to oxidize graphite for the synthesis of graphene oxide (GO) was applied, and then the as-prepared GO was reduced by SH to form rGO. Characterization was performed using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectrometry (XPS) and Raman spectra. The intensity ratio of the D and G band (ID/IG) of GO after reduction with SH increases from 0.96 (GO) to 1.11 (rGO), the results obtained from the Raman spectra proved high purity of the final products.

Highly recoverable TiO2-GO nanocomposites for stormwater disinfection

A highly recoverable titanium dioxide-graphene oxide (TiO2-GO) composite was developed by a facile method of ultrasonic treatment of GO nanosheets and TiO2 nanoparticles, which should overcome the separation problem of nanosized TiO2 from treated water. Separability of the prepared samples was systematically investigated by gravity settling experiments. The samples' photocatalytic activity for stormwater disinfection was also studied under the irradiation of a solar simulator. The results demonstrated that TiO2-GO showed high efficient separability due to its accelerated settling behaviour. Zeta-potential analysis showed that the accelerated sedimentation of the catalyst was attributed to the aggregation of TiO2-GO resulting from the electrostatic attraction between TiO2 and GO. The TiO2-GO composite with a mass ratio of 100:2 (TiO2-2%GO) achieved both higher separability and good photocatalytic activity for stormwater disinfection. Its suspension became clear (turbidity < 50 NTU) after 8 h of sedimentation, while 99.5% of E.coli were deactivated in 90 min. The TiO2-GO composite exhibited excellent durability; no apparent change in the separability of TiO2-2%GO was observed after 10 treatment cycles (15 h in total), while only slight decrease in the photocatalytic activity was noted. In conclusion, the developed TiO2-GO composite showed promising results for stormwater disinfection.

Magnetite hybrid photocatalysis: advance environmental remediation

One of the main public concerns is the aquatic habitat and its corresponding issues because of the incessant contamination of the ecological water systems. In recent years, research attention has been focused on processes that lead to an improved oxidative degradation of organic pollutants. Therefore, semiconductor photocatalysis technology has aroused scientists’ interest in environmental remediation. Although several semiconductors have proven to be ideal candidates for the treatment of water pollution, the efficient separation and recycling of this fine-powdered photocatalyst is still a scientific problem when applied in practice, including separation process, selectivity, and dispersion. A photocatalyst with magnetic properties allows the use of the technique of magnetic separation, which is one of the most effective and simple methods for removing suspended solids from wastewater without the need for further separation processes. The magnetic photocatalyst allows its use as a suspended material, providing the advantage to have a high surface area for reaction. This review highlights the advantages and disadvantages of current photocatalyst systems. Moreover, it focuses on hybrid magnetic photocatalysts, including metals and nonmetals, metal oxides, carbon-based materials, and ceramics.

Enhanced photocatalytic degradation of tetracycline antibiotics by reduced graphene oxide–CdS/ZnS heterostructure photocatalysts

Ternary RGO–CdS/ZnS heterostructures with enhanced visible-light photocatalytic activity have been prepared by a facile hydrothermal method.

Anchoring superparamagnetic core–shells onto reduced graphene oxide: fabrication of Ni–carbon–rGO nanocomposite for effective adsorption and separation

The magnetic Ni nanoparticles encapsulated in carbon shells were anchored on to reduced graphene oxide. The excellent removal ability of organic dyes and enhanced separation efficiency make NGC a useful candidate for waste water treatment.