Surface modification with dopamine and heparin/poly-L-lysine nanoparticles provides a favorable release behavior for the healing of vascular stent lesions

An endothelium membrane mimetic antithrombotic coating enables safer and longer extracorporeal membrane oxygenation application

Thrombosis and plasma leakage are two of the most frequent dysfunctions of polypropylene (PP) hollow fiber membrane (PPM) used in extracorporeal membrane oxygenation (ECMO) therapy. In this study, a superhydrophilic endothelial membrane mimetic coating (SEMMC) was constructed on polydopamine-polyethyleneimine pre-coated surfaces of the PPM oxygenator and its ECMO circuit to explore safer and more sustainable ECMO strategy. The SEMMC is fabricated by multi-point anchoring of a phosphorylcholine and carboxyl side chained copolymer (PMPCC) and grafting of heparin (Hep) to form PMPCC-Hep interface, which endows the membrane superior hemocompatibility and anticoagulation performances. Furthermore, the modified PPM reduces protein adsorption amount to less than 30 ng/cm2. More significantly, the PMPCC-Hep coated ECMO system extends the anti-leakage and non-clotting oxygenation period to more than 15 h in anticoagulant-free animal extracorporeal circulation, much better than the bare and conventional Hep coated ECMO systems with severe clots and plasma leakage in 4 h and 8 h, respectively. This SEMMC strategy of grafting bioactive heparin onto bioinert zwitterionic copolymer interface has great potential in developing safer and longer anticoagulant-free ECMO systems. STATEMENT OF SIGNIFICANCE: A superhydrophilic endothelial membrane mimetic coating was constructed on surfaces of polypropylene hollow fiber membrane (PPM) oxygenator and its ECMO circuit by multi-point anchoring of a phosphorylcholine and carboxyl side chain copolymer (PMPCC) and grafting of heparin (Hep). The strong antifouling nature of the PMPCC-Hep coating resists the adsorption of plasma bio-molecules, resulting in enhanced hemocompatibility and anti-leakage ability. The grafted heparin on the zwitterionic PMPCC interface exhibits superior anticoagulation property. More significantly, the PMPCC-Hep coating achieves an extracorporeal circulation in a pig model for at least 15 h without any systemic anticoagulant. This endothelial membrane mimetic anticoagulation strategy shows great potential for the development of safer and longer anticoagulant-free ECMO systems.

ε-Poly-l-lysine: A Naturally Occurring Biodegradable Polypeptide for Selective Detection of 5-Nitroimidazole Antibiotics in Animal Products and Living Cells via Fluorescence

The 5-nitroimidazole (5-NI) class of antibiotics, such as metronidazole, ornidazole, secnidazole, and tinidazole, are widely used to prevent bacterial infection in humans and livestock industries. However, their overuse contaminates the farmed animal products and water bodies. Hence, a selective, sensitive, and cost-effective method to detect 5-NI antibiotics is the need of the hour. Herein, we report a rapid, inexpensive, and efficient sensing system to detect 5-NI drugs using an as-prepared solution of ε-poly-l-lysine (ε-PL), a naturally occurring and biodegradable homopolypeptide that has an intrinsic fluorescence via clustering-triggered emission. The low nanomolar detection limit (3.25-3.97 nM) for the aforementioned representative 5-NI drugs highlights the sensitivity of the system, outperforming most of the reported sensors alike. The resulting fluorescence quenching was found to be static in nature. Importantly, excellent recovery (100.26-104.41%) was obtained for all real samples and animal products tested. Visual detection was demonstrated by using paper strips and silica gel for practical applications. Furthermore, ε-PL could detect 5-NI antibiotics in living 3T3-L1 mouse fibroblast cells via cellular imaging. Taken together, the present work demonstrates the detection of 5-NI antibiotics using a biocompatible natural polypeptide, ε-PL, and represents a simple and inexpensive analytical tool for practical application.

Achieving superior anticoagulation of endothelial membrane mimetic coating by heparin grafting at zwitterionic biocompatible interfaces

Thrombosis and bleeding are common complications of blood-contacting medical device therapies. In this work, an endothelium membrane mimetic coating (PMPCC/Hep) has been created to address these challenges. The coating is fabricated by multi-point anchoring of a phosphorylcholine copolymer (poly-MPC-co-MSA, PMPCC) with carboxylic side chains and end-group grafting of unfractionated heparin (Hep) onto polydopamine precoated blood-contacting material surfaces. The PMPCC coating forms an ultrathin cell outer membrane mimetic layer to resist protein adsorption and platelet adhesion. The tiny defects/pores of the PMPCC layer provide entrances for heparin end-group to be inserted and grafted onto the sub-layer amino groups. The combination of the PMPCC cell membrane mimetic anti-fouling nature with the grafted heparin bioactivity further enhances the anticoagulation performance of the formed endothelium membrane mimetic PMPCC/Hep coating. Compared to conventional Hep coating, the PMPCC/Hep coating further decreases protein adsorption and platelet adhesion by 50 % and 90 %, respectively. More significantly, the PMPCC/Hep coating shows a superior anticoagulation activity, even significantly higher than that of an end-point-attached heparin coating. Furthermore, the blood coagulation function is well preserved in the PMPCC/Hep coating anticoagulation strategy. All the results support that the PMPCC/Hep coating strategy has great potential in developing more efficient and safer blood-contacting medical devices.

Nanodiamond Decorated PEO Oxide Coatings on NiTi Alloy

Cardiovascular diseases (CVDs) remain a leading cause of death in the European population, primarily attributed to atherosclerosis and subsequent complications. Although statin drugs effectively prevent atherosclerosis, they fail to reduce plaque size and vascular stenosis. Bare metal stents (BMS) have shown promise in acute coronary disease treatment but are associated with restenosis in the stent. Drug-eluting stents (DES) have improved restenosis rates but present long-term complications. To overcome these limitations, nanomaterial-based modifications of the stent surfaces have been explored. This study focuses on the incorporation of detonation nanodiamonds (NDs) into a plasma electrolytic oxidation (PEO) coating on nitinol stents to enhance their performance. The functionalized ND showed a high surface-to-volume ratio and was incorporated into the oxide layer to mimic high-density lipoproteins (HDL) for reverse cholesterol transport (RCT). We provide substantial characterization of DND, including stability in two media (acetone and water), Fourier transmission infrared spectroscopy, and nanoparticle tracking analysis. The characterization of the modified ND revealed successful functionalization and adequate suspension stability. Scanning electron microscopy with EDX demonstrated successful incorporation of DND into the ceramic layer, but the formation of a porous surface is possible only in the high-voltage PEO. The biological assessment demonstrated the biocompatibility of the decorated nitinol surface with enhanced cell adhesion and proliferation. This study presents a novel approach to improving the performance of nitinol stents using ND-based surface modifications, providing a promising avenue for cardiovascular disease.

Polydopamine (PDA) coatings with endothelial vascular growth factor (VEGF) immobilization inhibiting neointimal formation post zinc (zn) wire implantation in rat aortas

BACKGROUND

Bioresorbable stents are designed to provide temporary mechanical support to the coronary arteries and then slowly degrade in vivo to avoid chronic inflammation. Zinc (Zn) is a promising material for bioresorbable stents; However, it can cause inflammation and neointimal formation after being implanted into blood vessels.

METHODS

To improve biocompatibility of Zn, we first coated it with polydopamine (PDA), followed by immobilization of endothelial vascular growth factor (VEGF) onto the PDA coatings. Adhesion, proliferation, and phenotype maintenance of endothelial cells (ECs) on the coated Zn were evaluated in vitro. Then, a wire aortic implantation model in rats mimicking endovascular stent implantation in humans was used to assess vascular responses to the coated Zn wires in vivo. Thrombosis in aortas post Zn wire implantation, degradation of Zn wires in vivo, neointimal formation surrounding Zn wires, and macrophage infiltration and extracellular matrix (ECM) remodeling in the neointimas were examined.

RESULTS

In vitro data showed that the PDA-coated Zn encouraged EC adhesion, spreading, proliferation, and phenotype maintenance on its surfaces. VEGF functionalization on PDA coatings further enhanced the biocompatibility of Zn to ECs. Implantation of PDA-coated Zn wires into rat aortas didn't cause thrombosis and showed a faster blood flow than pure Zn or the Zn wires coated with VEGF alone. In addition, the PDA coating didn't affect the degradation of Zn wires in vivo. Besides, the PDA-coated Zn wires reduced neointimal formation, increased EC coverage, decreased macrophage infiltration, and declined aggrecan accumulation in ECM. VEGF immobilization onto PDA coatings didn't cause thrombosis and affect Zn degradation in vivo as well, and further increased the endothelization percentage as compared to PDA coating alone, thus resulting in thinner neointimas.

CONCLUSION

These results indicate that PDA coatings with VEGF immobilization would be a promising approach to functionalize Zn surfaces to increase biocompatibility, reduce inflammation, and inhibit neointimal formation after Zn implantation in vivo.

Controlled drug delivery from chitosan-coated heparin-loaded nanopores anodically grown on nitinol shape-memory alloy

Nitinol (NiTi shape-memory alloy) is an interesting candidate in various medical applications like dental, orthopedic, and cardiovascular devices, owing to its unique mechanical behaviors and proper biocompatibility. The aim of this work is the local controlled delivery of a cardiovascular drug, heparin, loaded onto nitinol treated by electrochemical anodizing and chitosan coating. In this regard, the structure, wettability, drug release kinetics, and cell cytocompatibility of the specimens were analyzed in vitro. The two-stage anodizing process successfully developed a regular nanoporous layer of Ni-Ti-O on nitinol, which considerably decreased the sessile water contact angle and induced hydrophilicity. The application of the chitosan coatings controlled the release of heparin mainly by a diffusional mechanism, where the drug release mechanisms were evaluated by the Higuchi, first-order, zero-order, and Korsmeyer-Pepass models. Human umbilical cord endothelial cells (HUVECs) viability assay also showed the non-cytotoxicity of the samples, so that the best performance was found for the chitosan-coated samples. It is concluded that the designed drug delivery systems are promising for cardiovascular, particularly stent applications.

Extracellular matrix component-derived nanoparticles for drug delivery and tissue engineering

The extracellular matrix (ECM) consists of a complex combination of proteins, proteoglycans, and other biomolecules. ECM-based materials have been demonstrated to have high biocompatibility and bioactivity, which may be harnessed for drug delivery and tissue engineering applications. Herein, nanoparticles incorporating ECM-based materials and their applications in drug delivery and tissue engineering are reviewed. Proteins such as gelatin, collagen, and fibrin as well as glycosaminoglycans including hyaluronic acid, chondroitin sulfate, and heparin have been employed for cancer therapeutic delivery, gene delivery, and wound healing and regenerative medicine. Strategies for modifying and functionalizing these materials with synthetic and natural polymers or to enable stimuli-responsive degradation and drug release have increased the efficacy of these materials and nano-systems. The incorporation and modification of ECM-based materials may be used to drive drug targeting and increase tissue-specific cell differentiation more effectively.

Strategies for surface coatings of implantable cardiac medical devices

Cardiac medical devices (CMDs) are required when the patient's cardiac capacity or activity is compromised. To guarantee its correct functionality, the building materials in the development of CMDs must focus on several fundamental properties such as strength, stiffness, rigidity, corrosion resistance, etc. The challenge is more significant because CMDs are generally built with at least one metallic and one polymeric part. However, not only the properties of the materials need to be taken into consideration. The biocompatibility of the materials represents one of the major causes of the success of CMDs in the short and long term. Otherwise, the material will lead to several problems of hemocompatibility (e.g., protein adsorption, platelet aggregation, thrombus formation, bacterial infection, and finally, the rejection of the CMDs). To enhance the hemocompatibility of selected materials, surface modification represents a suitable solution. The surface modification involves the attachment of chemical compounds or bioactive compounds to the surface of the material. These coatings interact with the blood and avoid hemocompatibility and infection issues. This work reviews two main topics: 1) the materials employed in developing CMDs and their key characteristics, and 2) the surface modifications reported in the literature, clinical trials, and those that have reached the market. With the aim of providing to the research community, considerations regarding the choice of materials for CMDs, together with the advantages and disadvantages of the surface modifications and the limitations of the studies performed.

Poly(levodopa)-Functionalized Polysaccharide Hydrogel Enriched in Fe3O4 Particles for Multiple-Purpose Biomedical Applications

In recent years, there has been a significant increase in interest in the use of curdlan, a naturally derived polymer, for medical applications. However, it is relatively inactive, and additives increasing its biomedical potential are required; for example, antibacterial compounds, magnetic particles, or hemostatic agents. The stability of such complex constructs may be increased by additional functional networks, for instance, polycatecholamines. The article presents the production and characterization of functional hydrogels based on curdlan enriched with Fe₃O₄ nanoparticles (NPs) or Fe₃O₄-based heterostructures and poly(L-DOPA) (PLD). Some of the prepared modified hydrogels were nontoxic, relatively hemocompatible, and showed high antibacterial potential and the ability to convert energy with heat generation. Therefore, the proposed hydrogels may have potential applications in temperature-controlled regenerative processes as well as in oncology therapies as a matrix of increased functionality for multiple medical purposes. The presence of PLD in the curdlan hydrogel network reduced the release of the NPs but slightly increased the hydrogel's hemolytic properties. This should be taken into account during the selection of the final hydrogel application.

Constructions of synergistic photothermal therapy antibacterial hydrogel based on polydopamine, tea polyphenols and polyvinyl alcohol and effects on wound healing in mouse

Hydrogels with significant antibacterial efficacy have enormous potential in wound healing. This work reported a series of effective antibacterial and antioxidant hydrogels based on tea polyphenols (TP), polydopamine (PDA), and polyvinyl alcohol (PVA). PDA-TP molecular chains are formed from oxidized TP and PDA. These molecular chains, which were cross-linked with PVA by cyclic freeze-thaw (FT), formed the PVA/PDA-TP hydrogel (PPTP). The number of freezing-thawing cycles and the amount of TP would affect the mechanical properties and swelling properties of hydrogel. The PPTP hydrogel exhibited high photo thermal conversion efficiency, high antibacterial efficacy, antioxidant properties, good cellular compatibility and short wound closure time. The PPTP hydrogel leaded to wound closure in approximately 10 d in a full-thickness skin defect mouse model. The preparation method of hydrogel with non-chemical cross-linked and ability of rapid high temperature generation provided a new way to apply TP to wound healing and proved that synergistic chemical and photothermal therapy can effectively inhibit resistant bacteria and accelerate wound healing.

Biofunctionalization of cardiovascular stents to induce endothelialization: Implications for in- stent thrombosis in diabetes

Stent thrombosis remains one of the main causes that lead to vascular stent failure in patients undergoing percutaneous coronary intervention (PCI). Type 2 diabetes mellitus is accompanied by endothelial dysfunction and platelet hyperactivity and is associated with suboptimal outcomes following PCI, and an increase in the incidence of late stent thrombosis. Evidence suggests that late stent thrombosis is caused by the delayed and impaired endothelialization of the lumen of the stent. The endothelium has a key role in modulating inflammation and thrombosis and maintaining homeostasis, thus restoring a functional endothelial cell layer is an important target for the prevention of stent thrombosis. Modifications using specific molecules to induce endothelial cell adhesion, proliferation and function can improve stents endothelialization and prevent thrombosis. Blood endothelial progenitor cells (EPCs) represent a potential cell source for the in situ-endothelialization of vascular conduits and stents. We aim in this review to summarize the main biofunctionalization strategies to induce the in-situ endothelialization of coronary artery stents using circulating endothelial stem cells.

In vitro and in vivo studies on bacteria and encrustation resistance of heparin/poly-L-lysine-Cu nanoparticles coating mediated by PDA for ureteral stent application

Ureteral stents are commonly utilized as a medical device to aid the flow of urine. However, biofilm formation and encrustation complications have been clinical problems. To overcome this challenge, heparin/poly-L-lysine-copper (Hep/PLL-Cu) nanoparticle was immobilized on a dopamine-coated polyurethane surface (PU/NPs). The stability and structural properties of the nanoparticles were characterized by Zeta potential, poly dispersion index, transmission electron microscopy, atom force microscopy and contact angle. The surface composition, antibacterial potency, encrustation resistance rate and biocompatibility of PU/NPs were investigated by scanning electron microscope, X-ray photoelectron spectroscopy, antibacterial assay and MTS assay, respectively. In addition, the anti-encrustation property was studied by implanting coated NPs stents in the rat bladder for 7 days. It was shown that the size and distribution of Hep/PLL-Cu nanoparticles were uniform. PU/NPs could inhibit Proteus mirabilis proliferation and biofilm formation, and exhibit no cytotoxicity. Less encrustation (Ca and Mg salt) was deposited both in vitro and in vivo on samples, demonstrating that the NPs coating could be a potential surface modification method of ureteral material for clinical use.

Reducing Endogenous Labile Zn May Help to Reduce Smooth Muscle Cell Injury around Vascular Stents

Vascular stent service involves complex service environments and performance requirements, among which the histocompatibility of the stent could seriously affect the therapeutic effect. In the pathology of vascular disease, the thin fiber cap is easily ruptured, exposing the necrotic core below, and triggering a series of dangerous biochemical reactions. In contrast, the thin neointima, considered an essential structure growing on the stent, may evolve into vulnerable plaque structures due to lesions induced by the stent. Therefore, the reduction of necrosis around the stent below the thin neointima is indispensable. In this work, different cell model experiments suggested that the content of endogenous labile Zn positively correlated with cell injury. Zinquin-Zn fluorescence experiments and zinc ion channels research suggested that the change in the content of endogenous labile Zn in smooth muscle cells is affected by different stent coatings. The content of endogenous labile Zn in cells negatively correlated with cell viability. Animal experiments indirectly verified the increase in endogenous labile Zn by detecting the expression of Zn regulatory protein (metallothionein) in the necrotic tissues. Reducing the content of endogenous labile Zn may favor a reduction in smooth muscle cell injury and necrosis. This biochemical mechanism is effective in improving the therapeutic effect of vascular stents.

3D printing monetite-coated Ti-6Al-4V surface with osteoimmunomodulatory function to enhance osteogenesis

Titanium and its alloys are widely used in orthopedic implant surgery due to their good mechanical properties and biocompatibility. Recent studies have shown that the healing process of fractures involve not only the calcification of osteoblasts but also the regulation of the immune system. The functionalization of titanium surface coatings is one of the most important methods for solving implant failures. In this study, monetite (CaHPO₄) was coated on the Ti-6Al-4V porous scaffold by hydrothermal method. SEM, XRD and EDS were used to characterize the morphology, phase constitutes, elemental content of the coating, respectively. The results indicated that a well bonded and uniformly distributed monetite coating obtained, and the degradation performance and Ca²⁺ release of the surface coating were also studied. In terms of biology, live/dead staining and CCK8 methods showed the coating had good biocompatibility and BMSCs can adhere and proliferate on the surface. Flow cytometry and ELISA indicated that the surface monetite-coating had good anti-inflammatory properties. Through RNA-seq analysis, it was shown in KEGG that the osteoclast-related pathway was inhibited. In vitro, monetite induced osteogenic gene expression in BMSCs and inhibited the activity of osteoclasts. In vivo experiments showed that the monetite-coating increased bone formation. In summary, monetite-coating can effectively promote the osteogenesis in BMSCs, which may be achieved through bone immune regulation.

Polycatecholamine and gentamicin as modifiers for antibacterial and blood-biocompatible polyester vascular prostheses

Polyester (PET) prostheses are commonly used in reconstructive vascular surgery. The most serious complication after implantation is early or late infection of the graft. Therefore, there is high demand to protect prosthesis against bacterial adhesion and biofilm development. For this reason, in this work PET prostheses were first coated by highly adhesive polycatecholamine layer. The grafts were then coupled with gentamicin and studied in relation to morphological and structural properties, biological safety (contact with blood, reaction of vascular endothelial cells (HUVEC), Danio rerio fish), drug release and antibacterial activity. Among two tested catecholamine monomers, L-DOPA was found to be more effective precursor in this process than dopamine. For L-DOPA, assistance of Cu²⁺, Mg²⁺ and Na⁺ ions seems to increase the amount of further immobilized drug. Coated prostheses exhibited greater human endothelial cell proliferation increase and lower cytotoxic effect than uncoated. The modification reduced the hemolysis observed for pristine commercial graft and limited the rate of abnormalities in D. rerio larvae, confirming the safety of the proposed modification. The coating allowed to double the amount of immobilized antibiotic in comparison with uncoated graft which resulted in increased antibacterial activity and reduced bacterial adhesion against 4 bacterial strains prevalent in biomaterials infections. Overall, poly(L-DOPA)-coatings deposited on PET vascular grafts can effectively functionalize these prostheses for higher safety in biomedical applications.

Anticoagulant Hydrogel Tubes with Poly(ɛ-Caprolactone) Sheaths for Small-Diameter Vascular Grafts

Small-diameter vascular grafts (inner diameter < 6 mm) are useful in treating cardiovascular diseases. The off-the-shelf small-diameter vascular grafts for clinical applications remain a great limitation owing to their thrombogenicity or intimal hyperplasia. Herein, bilayer anticoagulant hydrogel tubes with poly(ε-caprolactone) (PCL) sheaths are prepared by freeze-thawing and electrospinning, which contain nanofibrillated cellulose (NFC)/poly(vinyl alcohol) (PVA)-heparin/poly-L-lysine nanoparticles tube as an inner layer and PCL sheath as an outer layer. The structure, anticoagulant property, and biocompatibility of the inner layer are studied. The effects of thickness of the outer layer on perfusion performance and mechanical property of hydrogel tubes with PCL sheaths (PCL-NFC/PVA-NPs tubes) are investigated. The effect of compliance of PCL-NFC/PVA-NPs tubes on their blood flow is studied by numerical simulation. The tissue compatibility and the patency of PCL-NFC/PVA-NPs tubes are evaluated by implantation in subcutaneous tissue of rats and carotid artery of rabbits. PCL-NFC/PVA-NPs tubes have prominent anticoagulation, sufficient burst pressure and good compliance similar to native arteries. PCL-NFC/PVA-NPs tubes facilitate infiltration of host cells and achieve active proliferation of recruited cells, which will be a promising candidate for small-diameter vascular grafts.

Performance of Polydopamine Complex and Mechanisms in Wound Healing

Polydopamine (PDA) has been gradually applied in wound healing of various types in the last three years. Due to its rich phenol groups and unique structure, it can be combined with a variety of materials to form wound dressings that can be used for chronic infection, tissue repair in vivo and serious wound healing. PDA complex has excellent mechanical properties and self-healing properties, and it is a stable material that can be used for a long period of time. Unlike other dressings, PDA complexes can achieve both photothermal therapy and electro activity. In this paper, wound healing is divided into four stages: antibacterial, anti-inflammatory, cell adhesion and proliferation, and re-epithelialization. Photothermal therapy can improve the bacteriostatic rate and remove reactive oxygen species to inhibit inflammation. Electrical signals can stimulate cell proliferation and directional migration. With low reactive oxygen species (ROS) levels, inflammatory factors are down-regulated and growth factors are up-regulated, forming regular collagen fibers and accelerating wound healing. Finally, five potential development directions are proposed, including increasing drug loading capacity, optimization of drug delivery platforms, improvement of photothermal conversion efficiency, intelligent electroactive materials and combined 3D printing.

Challenges and strategies for in situ endothelialization and long-term lumen patency of vascular grafts

Vascular diseases are the most prevalent cause of ischemic necrosis of tissue and organ, which even result in dysfunction and death. Vascular regeneration or artificial vascular graft, as the conventional treatment modality, has received keen attentions. However, small-diameter (diameter < 4 mm) vascular grafts have a high risk of thrombosis and intimal hyperplasia (IH), which makes long-term lumen patency challengeable. Endothelial cells (ECs) form the inner endothelium layer, and are crucial for anti-coagulation and thrombogenesis. Thus, promoting in situ endothelialization in vascular graft remodeling takes top priority, which requires recruitment of endothelia progenitor cells (EPCs), migration, adhesion, proliferation and activation of EPCs and ECs. Chemotaxis aimed at ligands on EPC surface can be utilized for EPC homing, while nanofibrous structure, biocompatible surface and cell-capturing molecules on graft surface can be applied for cell adhesion. Moreover, cell orientation can be regulated by topography of scaffold, and cell bioactivity can be modulated by growth factors and therapeutic genes. Additionally, surface modification can also reduce thrombogenesis, and some drug release can inhibit IH. Considering the influence of macrophages on ECs and smooth muscle cells (SMCs), scaffolds loaded with drugs that can promote M2 polarization are alternative strategies. In conclusion, the advanced strategies for enhanced long-term lumen patency of vascular grafts are summarized in this review. Strategies for recruitment of EPCs, adhesion, proliferation and activation of EPCs and ECs, anti-thrombogenesis, anti-IH, and immunomodulation are discussed. Ideal vascular grafts with appropriate surface modification, loading and fabrication strategies are required in further studies.

Heparin-Eluting Tissue-Engineered Bioabsorbable Vascular Grafts

The creation of small-diameter tissue-engineered vascular grafts using biodegradable materials has the potential to change the quality of cardiovascular surgery in the future. The implantation of these tissue-engineered arterial grafts has yet to reach clinical application. One of the reasons for this is thrombus occlusion of the graft in the acute phase. In this paper, we first describe the causes of accelerated thrombus formation and discuss the drugs that are thought to inhibit thrombus formation. We then review the latest research on methods to locally bind the anticoagulant heparin to biodegradable materials and methods to extend the duration of sustained heparin release. We also discuss the results of studies using large animal models and the challenges that need to be overcome for future clinical applications.

Surface Modification with NGF-Loaded Chitosan/Heparin Nanoparticles for Improving Biocompatibility of Cardiovascular Stent

Late thrombosis and restenosis remain major challenges to the safety of drug-eluting stents. Biofunctional modification to endow the surface with selective anticoagulation and promote endothelium regeneration has become a hotpot recently. In this study, chitosan and heparin were found to form three-dimensional nanoparticles by spontaneous electrostatic interaction. Based on the specific binding properties between heparin and nerve growth factor (NGF), a new type of NGF-loaded heparin/chitosan nanoparticles was constructed for surface modification. The results of material characterization show that the nanoparticles are successfully immobilized on the surface of the material. In vitro blood compatibility and endothelial cell compatibility assay showed that the modified surface could selectively inhibit platelet adhesion and smooth muscle cell overproliferation, while accelerating endothelialization via promoting endothelial cell proliferation and enhancing endothelial progenitor cell mobilization.

Novel Copper Nanoparticles Intercalated Polyurethane Heparin/Poly-L-Lysine Chelates Coated Stents: Viability Study for Coronary Vascular Cells and Aneurysms Treatments

Continuous delayed endothelium regeneration and continues thrombosis development designate a task for coronary artery stent rehabilitation. To progress the direct vascular cell behavior, aneurysms treatments and compatibility of cardiovascular implants novel copper intercalated polyurethane heparin/poly-L-lysine chelates treated stent has established in this report. The functional group modifications, structural characteristics, and stability of the chelates have investigated for polyurethane heparin: poly-L-lysine, copper intercalated polyurethane heparin/poly-L-lysine coated stents. The FTIR results showed the copper intercalation at 446 cmr and the Cu 2s peak at 932 eV from XPS also indicated that the successful coating of copper, polyurethane heparin, poly-L-lysine. The relative surface geomorphology of the chelates displayed the uniform Cu coating consisting of multilayer poly-L-lysine on the substrate. The stability and biocompatibility studies indicated the significantly enhanced performance with clot the APTT and TT periods as clotting and cell proliferation assessments. This type of composite proposes a stage on a stent external area for discerning track of vascular cell performance and aneurysms treatments with low side effects.

Evolution of drug-eluting biomedical implants for sustained drug delivery

In the field of drug delivery, the most commonly used treatments have traditionally been systemically delivered using oral or intravenous administration. The problems associated with this type of delivery is that the drug concentration is controlled by first pass metabolism, and therefore may not always remain within the therapeutic window. Implantable drug delivery systems (IDDSs) are an excellent alternative to traditional delivery because they offer the ability to precisely control the drug release, deliver drugs locally to the target tissue, and avoid the toxic side effects often experienced with systemic administration. Since the creation of the first FDA-approved IDDS in 1990, there has been a surge in research devoted to fabricating and testing novel IDDS formulations. The versatility of these systems is evident when looking at the various biomedical applications that utilize IDDSs. This review provides an overview of the history of IDDSs, with examples of the different types of IDDS formulations, as well as looking at current and future biomedical applications for such systems. Though there are still obstacles that need to be overcome, ever-emerging new technologies are making the manufacturing of IDDSs a rewarding therapeutic endeavor with potential for further improvements.

Poly-dopamine, poly-levodopa, and poly-norepinephrine coatings: Comparison of physico-chemical and biological properties with focus on the application for blood-contacting devices

Thanks to its simplicity, versatility, and secondary reactivity, dopamine self-polymerized coatings (pDA) have been widely used in surface modification of biomaterials, but the limitation in secondary molecular grafting and the high roughness restrain their application in some special scenarios. Therefore, some other catecholamine coatings analog to pDA have attracted more and more attention, including the smoother poly-norepinephrine coating (pNE), and the poly-levodopa coating (pLD) containing additional carboxyl groups. However, the lack of a systematic comparison of the properties, especially the biological properties of the above three catecholamine coatings, makes it difficult to give a guiding opinion on the application scenarios of different coatings. Herein, we systematically studied the physical, chemical, and biological properties of the three catecholamine coatings, and explored the feasibility of their application for the modification of biomaterials, especially cardiovascular materials. Among them, the pDA coating was the roughest, with the largest amount of amino and phenolic hydroxyl groups for molecule grafting, and induced the strongest platelet adhesion and activation. The pLD coating was the thinnest and most hydrophilic but triggered the strongest inflammatory response. The pNE coating was the smoothest, with the best hemocompatibility and histocompatibility, and with the strongest cell selectivity of promoting the proliferation of endothelial cells while inhibiting the proliferation of smooth muscle cells. To sum up, the pNE coating may be a better choice for the surface modification of cardiovascular materials, especially those for vascular stents and grafts, but it is still not widely recognized.

Photo-functionalized TiO2 nanotubes decorated with multifunctional Ag nanoparticles for enhanced vascular biocompatibility

Titanium dioxide (TiO2) has a long history of application in blood contact materials, but it often suffers from insufficient anticoagulant properties. Recently, we have revealed the photocatalytic effect of TiO2 also induces anticoagulant properties. However, for long-term vascular implant devices such as vascular stents, besides anticoagulation, also anti-inflammatory, anti-hyperplastic properties, and the ability to support endothelial repair, are desired. To meet these requirements, here, we immobilized silver nanoparticles (AgNPs) on the surface of TiO2 nanotubes (TiO2-NTs) to obtain a composite material with enhanced photo-induced anticoagulant property and improvement of the other requested properties. The photo-functionalized TiO2-NTs showed protein-fouling resistance, causing the anticoagulant property and the ability to suppress cell adhesion. The immobilized AgNPs increased the photocatalytic activity of TiO2-NTs to enhances its photo-induced anticoagulant property. The AgNP density was optimized to endow the TiO2-NTs with anti-inflammatory property, a strong inhibitory effect on smooth muscle cells (SMCs), and low toxicity to endothelial cells (ECs). The in vivo test indicated that the photofunctionalized composite material achieved outstanding biocompatibility in vasculature via the synergy of photo-functionalized TiO2-NTs and the multifunctional AgNPs, and therefore has enormous potential in the field of cardiovascular implant devices. Our research could be a useful reference for further designing of multifunctional TiO2 materials with high vascular biocompatibility.

Interleukin-4 assisted calcium-strontium-zinc-phosphate coating induces controllable macrophage polarization and promotes osseointegration on titanium implant

Titanium (Ti) and its alloys are believed to be promising scaffold materials for dental and orthopedic implantation due to their ideal mechanical properties and biocompatibility. However, the host immune response always causes implant failures in the clinic. Surface modification of the Ti scaffold is an important factor in this process and has been widely studied to regulate the host immune response and to further promote bone regeneration. In this study, a calcium-strontium-zinc-phosphate (CSZP) coating was fabricated on a Ti implant surface by phosphate chemical conversion (PCC) technique, which modified the surface topography and element constituents. Here, we envisioned an accurate immunomodulation strategy via delivery of interleukin (IL)-4 to promote CSZP-mediated bone regeneration. IL-4 (0 and 40 ng/mL) was used to regulate immune response of macrophages. The mechanical properties, biocompatibility, osteogenesis, and anti-inflammatory properties were evaluated. The results showed that the CSZP coating exhibited a significant enhancement in surface roughness and hydrophilicity, but no obvious changes in proliferation or apoptosis of bone marrow mesenchymal stem cells (BMMSCs) and macrophages. In vitro, the mRNA and protein expression of osteogenic related factors in BMMSCs cultured on a CSZP coating, such as ALP and OCN, were significantly higher than those on bare Ti. In vivo, there was no enhanced bone formation but increased macrophage type 1 (M1) polarization on the CSZP coating. IL-4 could induce M2 polarization and promote osteogenesis of BMMSCs on CSZP in vivo and in vitro. In conclusion, the CSZP coating is an effective scaffold for BMMSCs osteogenesis, and IL-4 presents the additional advantage of modulating the immune response for bone regeneration on the CSZP coating in vivo.

•

A chemical conversion calcium-strontium-zinc-phosphate (CSZP) coating is prepared on titanium.

•

The CSZP coating exhibits micellar lamellar crystal morphology in micro-nano scale.

•

The CSZP coating has an optimal topography and element composition for osteogenesis.

•

Interleukin-4 assisted CSZP coating can obtain better osteoimmunomodulation properties.

Single and multi-functional coating strategies for enhancing the biocompatibility and tissue integration of blood-contacting medical implants

Device-associated clot formation and poor tissue integration are ongoing problems with permanent and temporary implantable medical devices. These complications lead to increased rates of mortality and morbidity and impose a burden on healthcare systems. In this review, we outline the current approaches for developing single and multi-functional surface coating techniques that aim to circumvent the limitations associated with existing blood-contacting medical devices. We focus on surface coatings that possess dual hemocompatibility and biofunctionality features and discuss their advantages and shortcomings to providing a biocompatible and biodynamic interface between the medical implant and blood. Lastly, we outline the newly developed surface modification techniques that use lubricant-infused coatings and discuss their unique potential and limitations in mitigating medical device-associated complications.

Heparin/poly-l-lysine nanoplatform with growth factor delivery for surface modification of cardiovascular stents: The influence of vascular endothelial growth factor loading

The rapid re-endothelialization of the vascular stent surface is desirable for preventing thrombosis or reducing restenosis. Many biological factors that promote the biological behavior of endothelial cells have been used for the surface modification of stents. Vascular endothelial growth factor (VEGF), which plays an important role in angiogenesis, induces strong vascular growth. In this study, we investigated different VEGF concentrations (50 to 500 ng/ml) to determine the optimum concentration for biocompatibility. First, VEGF-loaded heparin/poly-l-lysine (Hep-PLL) nanoparticles were created by electrostatic interactions. Then, the VEGF-loaded nanoparticles were immobilized on dopamine-coated 316 L stainless steel (SS) surfaces. The physical and chemical properties of the modified surface were characterized and the biocompatibility was evaluated in vitro. The results indicated that the VEGF-loaded nanoparticles were immobilized successfully on the 316LSS surface, as evidenced by the results of Alcian Blue staining and water contact angle (WCA) measurements. The low platelet adhesion and activation indicated that the modified surfaces had good blood compatibility. The modified surfaces showed a good inhibitory effect on smooth muscle cells, indicating that they inhibited tissue hyperplasia. In addition, the modified surfaces significantly promoted endothelial cell adhesion, proliferation, migration, and biological activity, especially VEGF concentration was 350 ng/ml (NPV350). The optical VEGF concentration of the surface modified Hep-PLL nanoparticles was 350 ng/ml. The proposed method shows promise for potential applications for cardiovascular devices.

Multistep Instead of One-Step: A Versatile and Multifunctional Coating Platform for Biocompatible Corrosion Protection

Magnesium alloys have potential application in cardiovascular stents and orthopedic implants. However, the rapid corrosion rate of magnesium limits their clinical application. In order to improve the corrosion resistance and biocompatibility of the substrate, a protective coating is constructed by alternate immersing of MgZnMn alloy in epigallocatechin gallate (EGCG) and polyethyleneimine (PEI) solution. The conventional method is immersing magnesium alloy into a conversion solution by simple one-step immersion. In the present work, the EGCG/PEI coating is prepared by a novel alternate immersion method. The number of alternate immersions resulted in a different density of phenolic hydroxyl groups and amino groups on the surface. The corrosion resistance and bonding strength of the coating also varied with alternating immersion times. As the corrosion resistance and density of the functional groups varies, endothelial cells (ECs), smooth muscle cells (SMCs), osteoblasts, and macrophages showed a different growth state on EGCG/PEI coatings. In summary, this EGCG/PEI coating addressed the rapid corrosion rate of the magnesium alloy and can adjust its function by controlling the number of alternate immersions. The EGCG/PEI coating exhibited multifunctions: improved corrosion resistance, good compatibility with ECs and osteoblasts, and inhibition of SMC growth and inflammation, and the effective groups on the coating make it possible for further modification by grafting biomolecules. This is an effective method for preparing a multifunctional platform on biomedical magnesium alloys.

Multiply clustered gold-based nanoparticles complexed with exogenous pDNA achieve prolonged gene expression in stem cells

Development of a stable and prolonged gene delivery system is a key goal in the gene therapy field. To this end, we designed and fabricated a gene delivery system based on multiply-clustered gold particles that could achieve prolonged gene delivery in stem cells, leading to improved induction of differentiation.

Methods: Inorganic gold nanoparticles (AuNPs) underwent three rounds of complexation with catechol-functionalized polyethyleneimine (CPEI) and plasmid DNAs (pDNAs), in that order, with addition of heparin (HP) between rounds, yielding multiply-clustered gold-based nanoparticles (mCGNPs). Via metal-catechol group interactions, the AuNP surface was easily coordinated with positively charged CPEIs, which in turn allowed binding of pDNAs.

Results: Negatively charged HP was encapsulated with the positive charge of CPEIs via electrostatic interactions, making the NPs more compact. Repeating the complexation process yielded mCGNPs with improved transfection efficiency in human mesenchymal stem cells (hMSCs); moreover, these particles exhibited lower cytotoxicity and longer expression of pDNAs than conventional NPs. This design was applied to induction of chondrogenesis in hMSCs using pDNA harboring SOX9, an important chondrogenic transcription factor. Prolonged expression of SOX9 induced by mCGNPs triggered expression of chondrocyte extracellular matrix (ECM) protein after 14 days, leading to more efficient chondrogenic differentiation in vitro and in vivo.

Hyaluronic Acid Nanoparticle Composite Films Confer Favorable Time-Dependent Biofunctions for Vascular Wound Healing

Vascular stent implantation is the primary treatment for coronary artery disease. Surface modification of coronary stents is a topic of interest to prevent thrombosis and restenosis and to promote endothelization. However, bioactive coatings on implants have not yet been fully developed for the time-ordered biological requirements of vascular stents. The first month after vascular stent implantation, the pathological changes in the injured vascular tissue are complex and time-ordered. Therefore, vascular stents possess time-dependent biofunctions with early phase anticoagulant and anti-inflammatory properties. In the later stage, inhibitory effects on smooth muscle cell proliferation and the promotion of endothelial cell adhesion might meet the requirements of vascular repair. We fabricated three types of hyaluronic acid nanoparticles (HA-NPs) by subjecting HA and poly(ether imide) to ethyl(dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide coupling reaction. The HA-NPs prepared by HA with a molecular weight of 100 kDa showed the best stability in a hyaluronidase environment. HA-NP composite films (HA-NCFs) were then fabricated by coimmobilizing selected HA-NPs (100 kDa) and HA molecules (100 kDa) through amide reaction on PDA/HD coated 316 L stainless steel surfaces. The detachment behavior of HA-NPs (100 kDa) in PBS for 20 days indicated that the HA-NPs (100 kDa) gradually detached from the surface. In vitro tests (anticoagulant and anti-inflammatory tests, endothelial cells, and smooth muscle cells seeding, and bacterial adhesion test) indicated that the newly fabricated HA-NCFs have inhibitory effects on the adhesion of fibrinogen, platelets, macrophages, bacteria, SMCs, and ECs. As the HA-NPs detached from the surface, the HA-NCFs showed excellent gradual comprehensive biocompatibility, which promoted adhesion and proliferation of ECs while still exerting inhibitory effects on the platelets, macrophages, and SMCs. Finally, in vivo SS wire implantation test (aortic implantation in healthy Sprague-Dawley rats) showed that HA-NCFs possessed anti-inflammatory properties, inhibited the proliferation of smooth muscle cells, and promoted re-endothelialization. In particular, HA-NCFs with time-dependent biofunctions showed better antirestenosis effects than those of surfaces modified with molecular HA, which exhibited constant biocompatibility. This study provides an important basis for the construction of HA-NP composite films with favorable time-dependent biofunctions for the time-ordered biological requirements of vascular stent.

Cardiovascular stents: overview, evolution, and next generation

Compared to bare-metal stents (BMSs), drug-eluting stents (DESs) have been regarded as a revolutionary change in coronary artery diseases (CADs). Releasing pharmaceutical agents from the stent surface was a promising progress in the realm of cardiovascular stents. Despite supreme advantages over BMSs, in-stent restenosis (ISR) and long-term safety of DESs are still deemed ongoing concerns over clinically application of DESs. The failure of DESs for long-term clinical use is associated with following factors including permanent polymeric coating materials, metallic stent platforms, non-optimal drug releasing condition, and factors that have recently been supposed as contributory factors such as degradation products of polymers, metal ions due to erosion and degradation of metals and their alloys utilizing in some stents as metal frameworks. Discovering the direct relation between stent materials and associating adverse effects is a complicated process, and yet it has not been resolved. For clinical success it is of significant importance to optimize DES design and explore novel strategies to overcome all problems including inflammatory response, delay endothelialization, and sub-acute stent thrombosis (ST) simultaneously. In this work, scientific reports are reviewed particularly focusing on recent advancements in DES design which covers both potential improvements of existing and recently novel prototype stent fabrications. Covering a wide range of information from the BMSs to recent advancement, this study mostly sheds light on DES's concepts, namely stent composition, drug release mechanism, and coating techniques. This review further reports different forms of DES including fully biodegradable DESs, shape-memory ones, and polymer-free DESs.

Multifunctional coatings that mimic the endothelium: surface bound active heparin nanoparticles with in situ generation of nitric oxide from nitrosothiols

Multifunctional coatings that mimic the endothelial function in terms of nitric oxide generation and membrane-bound active heparin species are prepared via the immobilization of cystamine-modified heparin/polyethyleneimine (Hep-Cys/PEI) nanoparticles. Fourier transform infrared spectra (FTIR) and X-ray photoelectron spectroscopy (XPS) were conducted to confirm the coating formation. Functions of active heparin release and nitric oxide (NO) generation are obtained on the material surface after the immobilization of Hep-Cys/PEI nanoparticles. Moreover, a nanoparticle-immobilized coating is sufficiently flexible to resist the deformation of a 316L SS stent without any destruction. With the introduction of heparin, the antithrombin III (AT-III) binding ability was significantly enhanced with prolonged APTT time. Besides, a Hep-Cys/PEI nanoparticle immobilized coating surface not only significantly suppressed the platelet adhesion and activation, but also promoted EC proliferation and inhibited SMC proliferation. Besides, a milder tissue response was observed on the NP immobilized surface. With the synergistic effect of heparin and nitric oxide generating moieties, such multifunctional coatings presented potential for the modification of vascular materials.

Nanoparticles for Detection and Treatment of Peripheral Arterial Disease

Peripheral arterial disease (PAD) is defined as a slow, progressive disorder of the lower extremity arterial vessels characterized by chronic narrowing that often results in occlusion and is associated with loss of functional capacity. Although the PAD occurrence rate is increasing in the elderly population, outcomes with current treatment strategies are suboptimal. Hence, there is an urgent need to develop new technologies that overcome limitations of traditional modalities for PAD detection and therapy. In this Review, the application of nanotechnology as a tool that bridges the gap in PAD diagnosis and therapy is in focus. Several materials including synthetic, natural, biodegradable, and biocompatible materials are used to develop nanoparticles for PAD diagnostic and/or therapeutic applications. Moreover, various recent research approaches are being explored to diagnose PAD through multimodality imaging with different nanoplatforms. Further efforts include targeted delivery of various therapeutic agents using nanostructures as carriers to treat PAD. Last, but not least, despite being a fairly new field, researchers are exploring the use of nanotheranostics for PAD detection and therapy.

Controlling Molecular Weight of Hyaluronic Acid Conjugated on Amine-rich Surface: Toward Better Multifunctional Biomaterials for Cardiovascular Implants

The molecular weights (MWs) of hyaluronic acid (HA) in extracellular matrix secreted from both vascular endothelial cells (VECs) and vascular smooth muscle cells (VSMCs) play crucial roles in the cardiovascular physiology, as HA with appropriate MW influences important pathways of cardiovascular homeostasis, inhibits VSMC synthetic phenotype change and proliferation, inhibits platelet activation and aggregation, promotes endothelial monolayer repair and functionalization, and prevents inflammation and atherosclerosis. In this study, HA samples with gradients of MW (4 × 10³, 1 × 10⁵, and 5 × 10⁵ Da) were prepared by covalent conjugation to a copolymerized film of polydopamine and hexamethylendiamine (PDA/HD) as multifunctional coatings (PDA/HD-HA) with potential to improve the biocompatibility of cardiovascular biomaterials. The coatings immobilized with high-MW-HA (PDA/HD-HA-2: 1 × 10⁵ Da; PDA/HD-HA-3: 5 × 10⁵ Da) exhibited a remarkable suppression of platelet activation/aggregation and thrombosis under 15 dyn/cm² blood flow and simultaneously suppressed the adhesion and proliferation of VSMC and the adhesion, activation, and inflammatory cytokine release of macrophages. In particular, PDA/HD-HA-2 significantly enhanced VEC adhesion, proliferation, migration, and functional factors release, as well as the captured number of endothelial progenitor cells under dynamic condition. The in vivo results indicated that the multifunctional surface (PDA/HD-HA-2) created a favorable microenvironment of endothelial monolayer formation and functionalization for promoting reendothelialization and reducing restenosis of cardiovascular biomaterials.

Surface Modification with ECM-Inspired SDF-1α/Laminin-Loaded Nanocoating for Vascular Wound Healing

Surface biomimetic modification with extra-cellular matrix (ECM)-derived biomolecules is an emerging potential method of accelerating the healing of vascular stent lesions. However, insufficient capacity of the constructed biofunctional layer in maintaining its long-term efficiency and preventing thrombus and neointimal hyperplasia continue to be major limitations in clinical application. On the basis of the structure and function of ECM, in this study, we constructed a novel stromal cell-derived factor-1α (SDF-1α)/laminin-loaded nanocoating on the 316L stainless steel (SS) surface to provide improved function in modulation of vascular remodeling. The modified surface was found to control delivery of biomolecules and exhibit promising potential to provide stage-adjusted treatment after injury. An in vitro biocompatibility study suggested that the constructed layer may effectively prevent thrombosis formation by inhibiting platelet adhesion and activation, while accelerating endothelium regeneration by inducing endothelial cell (EC) migration and endothelial progenitor cell (EPC) aggregation. An in vivo animal test further demonstrated that the nanocoating may prevent thrombus and neointimal hyperplasia after implantation for 3 months. Therefore, the ECM-inspired nanocoating described in this study is a promising novel approach for vascular stent surface modification.

Hemocompatible ɛ-polylysine-heparin microparticles: A platform for detecting triglycerides in whole blood

Triglycerides are clinically important marker for atherosclerosis, heart disease and hypertension. Here, a platform for detecting triglycerides in whole blood directly was developed based on hemocompatible ɛ-polylysine-heparin microparticles. The obtained products of ɛ-polylysine-heparin microparticles were characterized by fourier transform infrared (FT-IR) spectra, transmission electron microscopy (TEM) and ζ-potential. Moreover, the blood compatibility of ɛ-polylysine-heparin microparticles was characterized by in vitro coagulation tests, hemolysis assay and whole blood adhesion tests. Considering of uniform particle size, good dispersibility and moderate long-term anticoagulation capability of the microparticles, a Lipase-(ɛ-polylysine-heparin)-glassy carbon electrode (GCE) was constructed to detect triglycerides. The proposed biosensor had good electrocatalytic activity towards triglycerides, in which case the sensitivity was 0.40μAmg^-1dLcm^-2 and the detection limit was 4.67mgdL^-1 (S/N = 3). Meanwhile, the Lipase-(ɛ-polylysine-heparin)-GCE electrode had strong anti-interference ability as well as a long shelf-life. Moreover, for the detection of triglycerides in whole blood directly, the detection limit was as low as 5.18mgdL^-1. The new constructed platform is suitable for detecting triglycerides in whole blood directly, which provides new analytical systems for clinical illness diagnosis.

In Situ Growth of Mesoporous Silica with Drugs on Titanium Surface and Its Biomedical Applications

Mesoporous silica has been developed for the modification of titanium surfaces that are used as implant materials. Yet, the traditional modification methods failed to effectively construct mesoporous silica on the titanium surface evenly and firmly, in which the interaction between mesoporous silica and titanium was mainly physical. Here, in situ growth of mesoporous silica on a titanium surface was performed using a simple evaporation-induced self-assembly strategy. Meantime, in situ introduction of drugs (heparin and vancomycin) to mesoporous silica was also adopted to improve the drug-loading amount. Both the above-mentioned processes were completed at the same time. Transmission electron microscopy, N₂ adsorption-desorption isotherms, Fourier transform infrared spectroscopy, scanning electron microscopy, and water contact angle measurements were used to characterize the structure of the mesoporous silica film. Results indicated that the mesoporous silica film that in situ grew on the titanium surface was smooth, thin, transparent, and stable. Cytotoxicity, proliferation performance of osteoblast cells, and in vitro and in vivo studies of the antibacterial activity of the coating were tested. This is the first study to modify the titanium surface by the in situ growth of a mesoporous silica coating with two kinds of drugs. The stability of the mesoporous silica coating can be attributed to the chemical bonding between dopamine and silicon hydroxyl of the mesoporous silica coating, and the smooth surface of mesoporous silica is a result of the method of in situ growth. The large amount of drug-loading also could be ascribed to the in situ introduction of drugs during the synthetic process. The strategy proposed in this work will bring more possibilities for the preparation of advanced functional materials based on the combination of mesoporous structure and metallic materials.

A multifunctional surface for blood contact with fibrinolytic activity, ability to promote endothelial cell adhesion and inhibit smooth muscle cell adhesion

A multifunctional surface with fibrinolytic activity, the ability to promote endothelial cell and inhibit smooth muscle cell adhesion was realized.

In situ incorporation of heparin/bivalirudin into a phytic acid coating on biodegradable magnesium with improved anticorrosion and biocompatible properties

Drugs were incorporated into a phytic acid coating on Mg by an in situ chemical route for corrosion control and biocompatibility.

Multifunctional biomaterial coatings: synthetic challenges and biological activity

A controlled interaction of materials with their surrounding biological environment is of great interest in many fields. Multifunctional coatings aim to provide simultaneous modulation of several biological signals. They can consist of various combinations of bioactive, and bioinert components as well as of reporter molecules to improve cell-material contacts, prevent infections or to analyze biochemical events on the surface. However, specific immobilization and particular assembly of various active molecules are challenging. Herein, an overview of multifunctional coatings for biomaterials is given, focusing on synthetic strategies and the biological benefits by displaying several motifs.

The use of heparin chemistry to improve dental osteogenesis associated with implants

In this study, we designed a hybrid Ti by heparin modifying the Ti surface followed by Growth/differentiation factor-5 (GDF-5) loading. After that, products were characterized by physicochemical analysis. Quantitative analysis of functionalized groups was also confirmed. The release behavior of GDF-5 grafted samples was confirmed for up to 21days. The surface modification process was found to be successful and to effectively immobilize GDF-5 and provide for its sustained release behavior. As an in vitro test, GDF-5 loaded Ti showed significantly enhanced osteogenic differentiation with increased calcium deposition under nontoxic conditions against periodontal ligament stem cells (PDLSc). Furthermore, an in vivo result showed that GDF-5 loaded Ti had a significant influence on new bone formation in a rabbit model. These results clearly confirmed that our strategy may suggest a useful paradigm by inducing osseo-integration as a means to remodeling and healing of bone defects for restorative procedures in dentistry.

Surface biomimetic modification with laminin-loaded heparin/poly-l-lysine nanoparticles for improving the biocompatibility

Late thrombus and restenosis caused by delayed endothelialization and insufficient biocompatibility of polymer coating continue to be the greatest limitations of drug-eluting stents. In this study, based on the specific structure of vascular basement membrane, a novel biomimetic nano-coating was constructed by incorporating laminin into electrostatic-assembled heparin/poly-l-lysine nanoparticles. Alteration of heparin and poly-l-lysine concentration ratio in a certain range has no significantly influence nanoparticle size, uniformity and stability, but may affect the chemical property and subsequently the binding efficiency to dopamine-coated titanium surface. By use of this feature, four different nanoparticles were synthesized and immobilized on titanium surface for creating gradient nanoparticle binding density. According to in vitro biocompatibility evaluation, the nanoparticle modified surfaces were found to effectively block coagulation pathway and reduce thrombosis formation. Moreover, NP10L and NP15L modified surface with relatively low heparin exposing density (4.9 to 7.1μg/cm2) showed beneficial effect in selective promoting EPCs and ECs proliferation, as well as stimulating cell migration and NO synthesis.