Microporous porphyrin solids

Enhanced Catalytic Activity of Binuclear Oxidovanadium(IV) Bisbenzimidazole Linked Porphyrin Dimer for the Generation of Biologically Active 3,4-Dihydropyrimidinones and Their Corresponding Thiones

Binuclear vanadyl(IV) porphyrin (V2BP), where two vanadium(IV) porphyrin macrocycles are linked through benzimidazole units at the β-positions, has been prepared and characterized with various techniques, such as UV-vis, Fourier transform-infrared, electron paramagnetic resonance, cyclic voltammetry, density functional transform calculations, and mass spectrometry. V2BP exhibits a red shift (Δλmax = 10 nm) in the Soret band as compared with unsubstituted parent vanadyl(IV) meso-tetraphenylporphyrin (VP). The synthesized binuclear vanadyl(IV) porphyrin (V2BP) has further been studied as a catalyst to explore a single-pot multicomponent Biginelli reaction producing biologically active 3,4-dihydropyrimidin-2-(1H)-one (DHPM)-based biomolecules and the corresponding thiones under solvent-free conditions and its catalytic activity has been compared with vanadyl(IV) meso-tetraphenylporphyrin (VP). Several reaction conditions, such as the amount of catalyst, time, solvent, and temperature, have been optimized to obtain the maximum yield of DHPMs or thiones. The synthesized β-functionalized V2BP porphyrin dimer manifests much higher conversion (84-95% yield) of DHPMs or the corresponding thiones under the optimized reaction conditions with high TON (4454-5037) and TOF (1113-1259 h-1) values for the one-pot multicomponent Biginelli reaction as compared to the literature. The catalyst exhibited excellent recyclability up to 10 cycles.

Quantum chemical modeling of hydrogen binding in metal-organic frameworks: validation, insight, predictions and challenges

A detailed chemical understanding of H2 interactions with binding sites in the nanoporous crystalline structure of metal-organic frameworks (MOFs) can lay a sound basis for the design of new sorbent materials. Computational quantum chemical calculations can aid in this quest. To set the stage, we review general thermodynamic considerations that control the usable storage capacity of a sorbent. We then discuss cluster modeling of H2 ligation at MOF binding sites using state-of-the-art density functional theory (DFT) calculations, and how the binding can be understood using energy decomposition analysis (EDA). Employing these tools, we illustrate the connections between the character of the MOF binding site and the associated adsorption thermodynamics using four experimentally characterized MOFs, highlighting the role of open metal sites (OMSs) in accessing binding strengths relevant to room temperature storage. The sorbents are MOF-5, with no open metal sites, Ni2(m-dobdc), containing Lewis acidic Ni(II) sites, Cu(I)-MFU-4l, containing π basic Cu(I) sites and V2Cl2.8(btdd), also containing π-basic V(II) sites. We next explore the potential for binding multiple H2 molecules at a single metal site, with thermodynamics useful for storage at ambient temperature; a materials design goal which has not yet been experimentally demonstrated. Computations on Ca2+ or Mg2+ bound to catecholate or Ca2+ bound to porphyrin show the potential for binding up to 4 H2; there is precedent for the inclusion of both catecholate and porphyrin motifs in MOFs. Turning to transition metals, we discuss the prediction that two H2 molecules can bind at V(II)-MFU-4l, a material that has been synthesized with solvent coordinated to the V(II) site. Additional calculations demonstrate binding three equivalents of hydrogen per OMS in Sc(I) or Ti(I)-exchanged MFU-4l. Overall, the results suggest promising prospects for experimentally realizing higher capacity hydrogen storage MOFs, if nontrivial synthetic and desolvation challenges can be overcome. Coupled with the unbounded chemical diversity of MOFs, there is ample scope for additional exploration and discovery.

Facile Synthesis of β-Tetracyano Vanadyl Porphyrin from Its Tetrabromo Analogue and Its Excellent Catalytic Activity for Bromination and Epoxidation Reactions

Complex 2,3,12,13-tetracyano-5,10,15,20-tetraphenylporphyrinatooxidovanadium(IV) {[V^IVOTPP(CN)₄], 2} has been prepared by nucleophilic substitution of β-bromo groups of the corresponding 2,3,12,13-tetrabromo-5,10,15,20-tetraphenylporphyrinatooxidovanadium(IV) {[V^IVOTPP(Br)₄], 1} using CuCN in quinoline. Both complexes show biomimetic catalytic activity similar to enzyme haloperoxidases and efficiently brominate various phenol derivatives in the presence of KBr, H₂O₂, and HClO₄ in the aqueous medium. Between these two complexes, 2 exhibits excellent catalytic activity with high turnover frequency (35.5-43.3 s^-1) due to the strong electron-withdrawing nature of the cyano groups attached at β-positions and its moderate nonplanar structure as compared to 1 (TOF = 22.1-27.4 s^-1). Notably, this is the highest turnover frequency value observed for any porphyrin system. The selective epoxidation of various terminal alkenes using complex 2 has also been carried out, and the results are good, specifying the importance of electron-withdrawing cyano groups. Catalysts 1 and 2 are recyclable, and the catalytic activity proceeds through the corresponding [V^VO(OH)TPP(Br)₄] and [V^VO(OH)TPP(CN)₄] intermediates, respectively.

Unsymmetrically β-Functionalized π-Extended Porphyrins: Synthesis, Spectral, Electrochemical Redox Properties, and Their Utilization as Efficient Two-Photon Absorbers

Two new series of unsymmetrically β-functionalized porphyrins, MTPP(NO₂)MA (1M), (MA = methyl acrylate) and MTPP(NO₂)MB (2M) (MB = mono-benzo) (where M = 2H, Co(II), Ni(II), Cu(II) and Zn(II)), were synthesized and characterized by various spectroscopic techniques. The saddle shape conformation of ZnTPP(NO₂)MAPy and ZnTPP(NO₂)MB was confirmed by single-crystal X-ray analysis. Density functional theory (DFT) calculation revealed that NiTPP(NO₂)MB has a severe nonplanar geometry possessing a high magnitude of ΔC_β = ±0.727 Å and Δ24 = ±0.422 Å values among all other porphyrins. Synthesized β-substituted porphyrins exhibited red-shifted B- and Q-bands corresponding to their parent molecule due to the electron-withdrawing peripheral substituents. Notable redshift (Δλ_max = 50-60 nm) in electronic spectral features and with weak-intensity emission spectral features were observed for the free-base porphyrins and Zn(II) complexes compared to H₂TPP and ZnTPP, respectively. The first-ring reduction potential of MTPP(NO₂)MA (1M) exhibited 0.21-0.5 V anodic shift, whereas 0.18-0.23 V anodic shift was observed in the first-ring oxidation potential compared to the corresponding MTPPs due to the presence of electron-withdrawing β-substituents at the periphery of the macrocycle. Interestingly, NiTPP(NO₂)MA (1Ni) has shown an additional Ni^II/Ni^III oxidation potential observed at 2.05 V along with two ring-centered oxidations. The first-ring reduction and oxidation potentials of MTPP(NO₂)MB (2M) have shown 0.39-0.46 and 0.19-0.27 V anodic shifts with respect to their corresponding MTPPs. The nonlinear optical (NLO) properties of all of the porphyrins were investigated, and the extracted nonlinear optical parameters revealed intense reverse-saturable absorption (RSA) behavior and the self-focusing behavior with positive nonlinear refractive index in the range of (0.19-1.75) × 10^-17 m²/W. Zn(II) complexes exhibited the highest two-photon absorption coefficient (β) and cross section (σ_TPA) of ∼95 × 10^-12 m/W and 19.66 × 10⁴ GM, respectively, among all of the metal complexes.

Corroles at work: a small macrocycle for great applications

Corrole chemistry has witnessed an impressive boost in studies in the last 20 years, thanks to the possibility of preparing corrole derivatives by simple synthetic procedures. The investigation of a large number of corroles has highlighted some peculiar characteristics of these macrocycles, having features different from those of the parent porphyrins. With this progress in the elucidation of corrole properties, attention has been focused on the potential for the exploitation of corrole derivatives in different important application fields. In some areas, the potential of corroles has been studied in certain detail, for example, the use of corrole metal complexes as electrocatalysts for energy conversion. In some other areas, the field is still in its infancy, such as in the exploitation of corroles in solar cells. Herein, we report an overview of the different applications of corroles, focusing on the studies reported in the last five years.

MOF-enabled confinement and related effects for chemical catalyst presentation and utilization

A defining characteristic of nearly all catalytically functional MOFs is uniform, molecular-scale porosity. MOF pores, linkers and nodes that define them, help regulate reactant and product transport, catalyst siting, catalyst accessibility, catalyst stability, catalyst activity, co-catalyst proximity, composition of the chemical environment at and beyond the catalytic active site, chemical intermediate and transition-state conformations, thermodynamic affinity of molecular guests for MOF interior sites, framework charge and density of charge-compensating ions, pore hydrophobicity/hydrophilicity, pore and channel rigidity vs. flexibility, and other features and properties. Collectively and individually, these properties help define overall catalyst functional behaviour. This review focuses on how porous, catalyst-containing MOFs capitalize on molecular-scale confinement, containment, isolation, environment modulation, energy delivery, and mobility to accomplish desired chemical transformations with potentially superior selectivity or other efficacy, especially in comparison to catalysts in homogeneous solution environments.

Novel Lanthanide(III) Porphyrin-Based Metal-Organic Frameworks: Structure, Gas Adsorption, and Magnetic Properties

The present work focuses on the hydrothermal synthesis and properties of porous coordination polymers of metal-porphyrin framework (MPF) type, namely, {[Pr4(H2TPPS)3]·11H2O} n (UPJS-10), {[Eu/Sm(H2TPPS)]·H3O+·16H2O} n (UPJS-11), and {[Ce4(H2TPPS)3]·11H2O} n (UPJS-12) (H2TPPS = 4,4',4″,4‴-(porphyrin-5,10,15,20-tetrayl)tetrakisbenzenesulfonate(4-)). The compounds were characterized using several analytical techniques: infrared spectroscopy, thermogravimetric measurements, elemental analysis, gas adsorption measurements, and single-crystal structure analysis (SXRD). The results of SXRD revealed a three-dimensional open porous framework containing crossing cavities propagating along all crystallographic axes. Coordination of H2TPPS4- ligands with Ln(III) ions leads to the formation of 1D polymeric chains propagating along the c crystallographic axis. Argon sorption measurements at -186 °C show that the activated MPFs have apparent BET surface areas of 260 m2 g-1 (UPJS-10) and 230 m2 g-1 (UPJS-12). Carbon dioxide adsorption isotherms at 0 °C show adsorption capacities up to 1 bar of 9.8 wt % for UPJS-10 and 8.6 wt % for UPJS-12. At a temperature of 20 °C, the respective CO2 adsorption capacities decreased to 6.95 and 5.99 wt %, respectively. The magnetic properties of UPJS-10 are characterized by the presence of a close-lying nonmagnetic ground singlet and excited doublet states in the electronic spectrum of Pr(III) ions. A much larger energy difference was suggested between the two lowest Kramers doublets of Ce(III) ions in UPJS-12. Finally, the analysis of X-band EPR spectra revealed the presence of radical spins, which were tentatively assigned to be originating from the porphyrin ligands.

Metal-organic frameworks of linear trinuclear cluster secondary building units: structures and applications

Secondary building units (SBUs) in metal-organic frameworks (MOFs) are essential from both a structural and performance perspective. While a variety of SBUs, such as paddlewheel CuII2, triangular CrIII3, tetrahedral ZnII4, and octahedral ZrIV6 have been extensively studied, the linear trinuclear SBUs (herein denoted as M₃), though frequently encountered, are rarely discussed as a class. A literature survey reveals that M₃ clusters are ubiquitous in discrete molecular entities as well as in MOFs. Unlike most other cluster types, however, they have an unprecedented metal diversity and ligand tolerance. The single-crystals of some M₃-based MOFs are also sufficiently robust upon guest removal and exchange or multi-step post-modifications to enable catalytic mechanism elucidation. Some of these M₃-based SBUs endow MOFs with stability under demanding conditions necessary, for example, in flue gas separation. Herein we review MOFs sustained by this common but under-appreciated class of SBUs and discuss applications of the resulting MOF motifs.

Effect of solvent on the electronic absorption spectral properties of mixed β-octasubstituted free base tetraphenylporphyrins

A near planar macrocycle containing 2,3,12,13-tetraphenylethynyl-5,10,15,20-tetrakis-(4[Formula: see text]-[Formula: see text]-butylphenyl)porphyrin, H2T(4[Formula: see text]-[Formula: see text]-Bu Ph)P(PE)4 and a series of antipodally mixed substituted nonplanar porphyrins, 2,3,5,10,12,13,15,20-octaphenyl-7,8,17,18-tetra(2[Formula: see text]-thienyl/phenylethynyl, PE)porphyrin, H2OPP(2[Formula: see text]-Th/PE)4 and 2,3,12,13-tetramethyl-7,8,17,18-tetra(2[Formula: see text]-thienyl/PE)-5,10,15,20-tetraphenylporphyrin, H2TPP(CH[Formula: see text](2[Formula: see text]-Th/PE)4were examined by electronic absorption spectroscopy in twenty different solvents. The presence of push-pull substituents at the antipodal [Formula: see text]-pyrrole positions of the nonplanar macrocycle induces varying degrees of orthogonal dipole moments to the porphyrin ring. The influence of different solvents on the degree of nonplanarity and electronic nature of the macrocycle on their electronic absorption spectral properties were examined. Generally, free base porphyrins showed dramatic solvent dependent absorption spectral band shifts and follow the order: H2OPP(PE)4 > H2OPP(2[Formula: see text]-Th)[Formula: see text] H2TPP(CH[Formula: see text](2[Formula: see text]-Th)4 >[Formula: see text]H2TPP(CH[Formula: see text](PE)4 > H2T(4[Formula: see text]-[Formula: see text]Bu Ph)P(PE)4. Absorption spectral data in different solvents was analyzed using selected solvatochromic parameters, ([Formula: see text] – 1)/(2[Formula: see text] + 1), [Formula: see text] (30),[Formula: see text], and [Formula: see text]*. The enhanced red-shift of the absorption bands of the mixed substituted porphyrins in polar solvents was influenced by solvent-core (porphyrin) interaction and is reflected from the 1H NMR chemical shift of the core imino-hydrogens in polar solvents relative that observed in less polar solvents. The magnitude of the difference in chemical shift ([Formula: see text], ppm) of imino-hydrogens in DMSO-d6 relative to that in CDCl3 follow the order: H2TPP(CH[Formula: see text](2[Formula: see text]-Th)4 (1.37 ppm) > H2OPP(PE)4 (1.17 ppm) > H2TPP(CH[Formula: see text](PE)4 (0.57 ppm). The large red-shift in B and Q bands in polar solvents relative to apolar (or less polar) solvents has been possible due to the combined effect of the electronic nature of the macrocycle, its nonplanarity, and solvent-porphyrin core interactions.

A historical perspective on porphyrin-based metal-organic frameworks and their applications

Porphyrins are important molecules widely found in nature in the form of enzyme active sites and visible light absorption units. Recent interest in using these functional molecules as building blocks for the construction of metal-organic frameworks (MOFs) have rapidly increased due to the ease in which the locations of, and the distances between, the porphyrin units can be controlled in these porous crystalline materials. Porphyrin-based MOFs with atomically precise structures provide an ideal platform for the investigation of their structure-function relationships in the solid state without compromising accessibility to the inherent properties of the porphyrin building blocks. This review will provide a historical overview of the development and applications of porphyrin-based MOFs from early studies focused on design and structures, to recent efforts on their utilization in biomimetic catalysis, photocatalysis, electrocatalysis, sensing, and biomedical applications.

Rapid Exciton Migration and Amplified Funneling Effects of Multi-Porphyrin Arrays in a Re(I)/Porphyrinic MOF Hybrid for Photocatalytic CO2 Reduction

A porphyrinic metal-organic framework (PMOF) known as PCN-222(Zn) was chemically doped with a molecular Re(I) catalyst-bearing carboxylate anchoring group to form a new type of metal-organic framework (MOF)-Re(I) hybrid photocatalyst. The porphyrinic MOF-sensitized hybrid (PMOF/Re) was prepared with an archetypical CO₂ reduction catalyst, (L)Re^I(CO)₃Cl (Re(I); L = 4,4'-dicarboxylic-2,2'-bipyridine), in the presence of 3 vol % water produced CO with no leveling-off tendency for 59 h to give a turnover number of ≥1893 [1070 ± 80 μmol h^-1 (g MOF)^-1]. The high catalytic activity arises mainly from efficient exciton migration and funneling from photoexcited porphyrin linkers to the peripheral Re(I) catalytic sites, which is in accordance with the observed fast exciton (energy) migration (≈1 ps) in highly ordered porphyrin photoreceptors and the effective funneling into Re(I) catalytic centers in the Re(I)-doped PMOF sample. Enhanced catalytic performance is convincingly supported by serial photophysical measurements including decisive Stern-Volmer interpretation.

Porphyrin-based frameworks for oxygen electrocatalysis and catalytic reduction of carbon dioxide

The recent progress made on porphyrin-based frameworks and their applications in energy-related conversion technologies (e.g., ORR, OER and CO₂RR) and storage technologies (e.g., Zn–air batteries).

The role of metal–organic porous frameworks in dual catalysis

Metal–organic frameworks (MOFs) are a valuable group of porous crystalline solids with inorganic and organic parts that can be used in dual catalysis.

Mechanochemistry of Metal-Organic Frameworks under Pressure and Shock

ConspectusMetal-organic framework solids (MOFs) are synthetic nanoporous materials that have drawn intense efforts in synthesis and characterization of chemical properties, most notably for their ability to adsorb liquids and gases. They are constructed as "node-spacer" nanostructured materials: metal centers (ions or clusters) connected by organic linkers (commonly containing carboxylate or imidazolate groups) to form crystalline, extended, often highly nanoporous structures. MOFs exhibit a variety of advantages over conventional porous materials: rationally designed synthesis of desired crystal structures and crystal engineering become feasible; great synthetic versatility and ease of incorporating different chemical functionalities are realized; and the use of lightweight organic linkers allows for ultrahigh surface area and porosity previously not accessible to conventional materials (i.e., zeolites and porous carbon). As a consequence, MOFs show great promise for a rapidly expanding collection of applications such as gas storage, separations, catalysis, sensing, and drug delivery.The mechanochemistry of MOFs and their response to shock waves, which we discuss in this Account, have been only partially explored. Mechanochemistry, the connection between the mechanical and the chemical worlds, has ancient origins. Rubbing sticks together to start a fire is mechanochemistry. Only in the past decade or so, however, has mechanochemistry gained a notable focus in the chemical community. In the following discussion, we present a general introduction to the complex mechanochemical behavior of MOFs both under quasi-static compression and under shock loading created by high-speed impact. During elastic deformation, MOFs undergo reversible structural or phase transitions. Plastic deformation of MOFs can result in mechanochemistry and can permanently modify the crystal structure, the pore dimensions and configuration, and the chemical bonding. The large energies required to induce bond rearrangement during plastic deformation suggest an interesting potential of MOFs for shock wave mitigation applications.MOFs are promising materials for shock energy dissipation because of the high density of nanopores which can absorb shock energy as they collapse. We have recently developed a platform to assess shock wave energy attenuation by MOFs and other powdered materials. It uses a tabletop laser-driven flyer plate to impact MOF samples at velocities of up to 2.0 km/s. The pressure of the shock waves that break out from the MOF sample can be measured by photon Doppler velocimetry. By measuring the shock profiles of MOF layers with different thicknesses, we can determine the shock pressure attenuation by the MOF layer. We have identified the two-wave structure of shocks in MOFs caused by nanopore collapse. Electron micrographs of recovered shocked MOFs show distinct zones in the shocked material corresponding to shock powder compaction, nanopore collapse, and chemical bond destruction.

Control of the Porosity in Manganese Trimer-Based Metal-Organic Frameworks by Linker Functionalization

Manganese complexes have attracted significant interest in chemical industries and academic research for their application as catalysts owing to their ability to attain a variety of oxidation states. Generally, sterically bulky ligands are required to isolate molecular homogeneous catalysts in order to prevent decomposition. Herein, we capitalize on the catalytic properties of Mn and circumvent the instability of these complexes through incorporation of Mn-atoms into porous crystalline frameworks, such as metal-organic frameworks (MOFs). MOFs are able to enhance the stability of these catalysts while also providing accessibility to the Mn sites for enhanced reactivity. We solvothermally synthesized two trinuclear Mn-based MOFs, namely [Mn₃O(BDC)₃(H₂O)₃]_n (Mn-MIL-88, where H₂BDC = benzene-1,4-dicarboxylic acid) and [Mn₃O(BDC-Me₄)₃(H₂O)₃]_n (Mn-MIL-88-Me₄, where H₂BDC-Me₄ = 2,3,5,6-tetramethylterephthalic acid). Through comprehensive single-crystal X-ray diffraction, spectroscopic, and magnetic studies, we revealed that both MOFs are in a Mn(II/III) mixed-valence state instead of the commonly observed Mn(III) oxidation state. Furthermore, the use of a methylated linker (BDC-Me₄) allowed access to permanent porosity in Mn-MIL-88-Me₄, which is an analogue of the flexible MIL-88 family, yielding a catalyst for alcohol oxidation.

Enhancing catalytic alkane hydroxylation by tuning the outer coordination sphere in a heme-containing metal-organic framework

Catalytic heme active sites of enzymes are sequestered by the protein superstructure and are regulated by precisely defined outer coordination spheres. Here, we emulate these protective functions in the porphyrinic metal-organic framework PCN-224 by post-synthetic acetylation and subsequent hydroxylation of the Zr6 nodes. A suite of physical methods demonstrates that both transformations preserve framework structure, crystallinity, and porosity without modifying the inner coordination spheres of the iron sites. Single-crystal X-ray analyses establish that acetylation replaces the mixture of formate, benzoate, aqua, and terminal hydroxo ligands at the Zr6 nodes with acetate ligands, and hydroxylation affords nodes with seven-coordinate, hydroxo-terminated Zr4+ ions. The chemical influence of these reactions is probed with heme-catalyzed cyclohexane hydroxylation as a model reaction. By virtue of passivated reactive sites at the Zr6 nodes, the acetylated framework oxidizes cyclohexane with a yield of 68(8)%, 2.6-fold higher than in the hydroxylated framework, and an alcohol/ketone ratio of 5.6(3).

Metalloporphyrinic metal-organic frameworks: Controlled synthesis for catalytic applications in environmental and biological media

Recently, as a new sub-family of porous coordination polymers (PCPs), porphyrinic-MOFs (Porph-MOFs) with biomimetic features have been developed using porphyrin macrocycles as ligands and/or pillared linkers. The control over the coordination of the porphyrin ligand and its derivatives however remains a challenge for engineering new tunable Porph-MOF frameworks by self-assembly methods. The key challenges exist in the following respects: (i) collapse of the large open pores of Porph-MOFs during synthesis, (ii) deactivation of unsaturated metal-sites (UMCs) by axial coordination, and (iii) the tendency of both coordinated moieties (at peripheral meso- and beta-carbon sites) and the N₄-pyridine core to coordinate with metal cations. In this respect, this review covers the advances in the design of Porph-MOFs relative to their counterpart covalent organic frameworks (Porph-COFs). The potential utility of custom-designed porphyrin/metalloporphyrins ligands is highlighted. Synthesis strategies of Porph-MOFs are also illustrated with modular design of hybrid guest@host composites (either Porph@MOFs or guest@Porph-MOFs) with exceptional topologies and stability. This review summarizes the synergistic benefits of coordinated porphyrin ligands and functional guest molecules in Porph-MOF composites for enhanced catalytic performance in various redox applications. This review shed lights on the engineering of new tunable hetero-metals open active sites within (metallo)porphyrin-MOFs as out-of-the-box platforms for enhanced catalytic processes in chemical and biological media.

Two-Dimensional Metal-Organic Framework/Enzyme Hybrid Nanocatalyst as a Benign and Self-Activated Cascade Reagent for in Vivo Wound Healing

Metal-organic frameworks (MOFs)-based peroxidase mimics have been seldom applied in the biomedical field, especially in vivo. One of the main reasons is their optimum reactions occur in strong acidic environments with a pH of 3-4, severely limiting their applications in living systems where neutral pH is usually required. Other types of peroxidase mimics also suffer such a fatal defect. Additionally, the direct introduction of the relatively high concentrated and toxic reaction reagent H₂O₂ would induce undesired damage to normal tissues. Herein, a MOF-based hybrid nanocatalyst as a benign and self-activated cascade reagent has been constructed. Owing to better catalytic performance compared with three-dimensional bulk MOF, an ultrathin two-dimensional (2D) MOF (2D Cu-TCPP(Fe)) nanosheet is chosen as a model of peroxidase mimic to physically adsorb glucose oxidase (GOx) for fabricating such a hybrid nanocatalyst. Nontoxic glucose can be continuously converted into abundant gluconic acid and H₂O₂ by GOx, avoiding the direct use of relatively high concentrated and toxic H₂O₂ and minimizing the harmful side effects. The generated gluconic acid can decrease the pH value from 7 to 3-4, dramatically activating the peroxidase-like activity of 2D Cu-TCPP(Fe) nanosheets. Meanwhile, the produced H₂O₂ is used for subsequent catalysis of activated 2D Cu-TCPP(Fe) nanosheets, leading to efficient generation of an extremely toxic hydroxyl radial and antibacterial capacity. In vitro and in vivo results illustrate the designed benign and self-activated cascade reagent possesses a robust antibacterial effect with negligible biotoxicity.

A novel homochiral metal–organic framework with an expanded open cage based on (R)-3,3′-bis(6-carboxy-2-naphthyl)-2,2′-dihydroxy-1,1′-binaphthyl: synthesis, X-ray structure and efficient HPLC enantiomer separation

A new homochiral MOF with an expanded open cage was synthesized and utilized as a chiral stationary phase for HPLC.

Vanadyl β-tetrabromoporphyrin: synthesis, crystal structure and its use as an efficient and selective catalyst for olefin epoxidation in aqueous medium

We hereby report the synthesis, characterization and catalytic applications in the epoxidation of alkenes by a vanadyl porphyrin having bulky bromo substituents at the β-positions viz. vanandyltetrabromotetraphenylporphyrin (1). The synthesized porphyrin was characterized by various spectroscopic techniques like UV-visible, FT-IR, EPR, MALDI-TOF mass spectrometry and single crystal X-ray analysis. Porphyrin 1 has a nonplanar structure as indicated by its X-ray structure, DFT and electrochemical studies. 1 was analyzed for its catalytic application in the epoxidation of various alkenes. The catalytic reactions were carried out in CH₃CN/H₂O mixture in 3 : 1 (v/v) ratio. 1 displayed good efficiency in terms of mild reaction conditions, lower reaction temperature and minimal catalyst amount consumption. 1 exhibited excellent selectivity, high conversion efficiency and huge TOF (7600–9800 h⁻¹) in a significantly low reaction time of 0.5 h. Catalyst 1 was regenerated at the end of various catalytic cycles making it reusable and industrially important.

We have synthesized β-tetrabromo-meso-tetraphenylporphyrinatooxidovanadium(iv) (VOTPPBr₄) which possesses high thermal stability and nonplanar macrocyclic core. Further, it was utilized for selective epoxidation of olefins in good yields with very high TOF numbers.

Synthesis, spectral and electrochemical redox properties of N-methyl fused nickel(II) porphyrin

[Formula: see text]-methyl fused nickel(II) porphyrin was synthesized by a facile synthetic route in excellent yield. The effect of the electron-donating methyl group on spectral and electrochemical redox properties was analyzed by comparing the electrochemistry with that of its precursors. [Formula: see text]-methylated fused nickel(II) porphyrin exhibited a red-shifted absorption spectrum ([Formula: see text] 6–13 nm) and a 180[Formula: see text]mV anodic shift in the first ring oxidation as well as a 210[Formula: see text]mV shift in reduction with respect to its Ni(II)-fused porphyrin precursor (Ni[Formula: see text]-(NH)TPP). However, the absorption spectral features and redox potentials of N-methyl fused nickel(II) porphyrin are marginally shifted as compared to its immediate precursor, [Formula: see text]-formyl Ni(II)-fused porphyrin. Notably, Ni(II)(N-CH[Formula: see text](CHO)TPP exhibited a third oxidation at 1.51[Formula: see text]mV, corresponding to oxidation of Ni(II) to Ni(III) due to the presence of “push–pull” [Formula: see text] substituents.

Recent Advances in Catalyzed Sequential Reactions and the Potential Use of Tetrapyrrolic Macrocycles as Catalysts

Complexes of porphyrins and of other similar tetrapyrrolic macrocycles are extensively explored as catalysts for different chemical processes, and the development of solid catalysts for heterogeneous processes using molecules with the ability to act as multifunctional catalysts in one-pot reactions is increasing and can lead to the wider use of this class of molecules as catalysts. This mini review focuses on the application of this class of complexes as catalysts in a variety of sequential one-pot reactions.

Magnesium Tetra(phenylethynyl)porphyrin: Stepwise Synthetic Route, Crystal Structures, and Longer Singlet Excited-State Lifetime than Zinc Congener

Magnesium tetra(arylethynyl)porphyrins (aryl=Ph or 4-CF₃ C₆ H₄ ) were synthesized via 5,15-di(triisopropylsilylethynyl)-10,20-di(arylethynyl)porphyrin to ensure good solubility and high synthetic yields. Magnesium tetra(phenylethynyl)porphyrin was subjected to structural analyses and physico-chemical characterization. Single-crystal X-ray analysis revealed porous crystal structures featuring solvent molecules in their pores. From femtosecond transient absorption measurements we concluded that the singlet excited-state lifetime of magnesium tetra(phenylethynyl)porphyrin is with 7.4 ns substantially longer than that of its zinc congener with 2.8 ns; this is attributed to the lower atomic weight of magnesium compared with zinc.

Spectroscopic Evidence of Pore Geometry Effect on Axial Coordination of Guest Molecules in Metalloporphyrin-Based Metal Organic Frameworks

A systematic comparison of host-guest interactions in two iron porphyrin-based metal-organic frameworks (MOFs), FeCl-PCN222 and FeCl-PCN224, with drastically different pore sizes and geometries is reported in this fundamental spectroscopy study. Guest molecules (acetone, imidazole, and piperidine) of different sizes, axial binding strengths, and reactivity with the iron porphyrin centers are employed to demonstrate the range of possible interactions that occur at the porphyrin sites inside the pores of the MOF. Binding patterns of these guest species under the constraints of the pore geometries in the two frameworks are established using multiple spectroscopy methods, including UV-vis diffuse reflectance, Raman, X-ray absorption, and X-ray emission spectroscopy. Line shape analysis applied to the latter method provides quantitative information on axial ligation through its spin state sensitivity. The observed coordination behaviors derived from the spectroscopic analyses of the two MOF systems are compared to those predicted using space-filling models and relevant iron porphyrin molecular analogues. While the space-filling models show the ideal axial coordination behavior associated with these systems, the spectroscopic results provide powerful insight into the actual binding interactions that occur in practice. Evidence for potential side reactions occurring within the pores that may be responsible for the observed deviation from model coordination behavior in one of the MOF/guest molecule combinations is presented and discussed in the context of literature precedent.

Sorption and catalysis by robust microporous metalloporphyrin framework solids

Two isostructural metalloporphyrin framework solids have been synthesized. Both frameworks contains manganese(III) metal complexes of trans-dicarboxylateporphyrins whose peripheralcarboxylates coordinate the edges of tetrahedral Zn4O[Formula: see text] clusters; the two metalloporphyrins explored are Mn(III) and Co(II). The cubic interpenetrated frameworks have 72% free volume and 4 × 7 Å averaged size pores. The evacuated frameworks are robust and retain a structure open to the sorption of substrates with medium polarity. The manganese porphyrin framework catalyzes the hydroxylation of cyclic and linear alkanes with iodosylbenzene as oxidant in a size- and polarity-selective manner. In addition, the catalysis was found to occur within the pores, making this a rare case of porphyrin framework solid with interior catalysis.

Porphyrins for olfaction mimic: The Rome Tor Vergata approach

The impressive chemistry shown by porphyrins in natural systems is particularly attractive for exploitation in chemical sensors. In these devices the sensing mechanisms can mimic most of the porphyrin biological reactivity, such as reversible binding, activation of small molecules, redox activity, and photoactivated processes. The simultaneous presence of multiple binding mechanisms allows porphyrins to interact with a large variety of analytes. This feature reduces the selectivity, but prompts the development of sensor arrays, where the cross-selectivity of more sensors is used to classify and identify samples characterized by a complex composition. Since 1995 the Sensors Group of the University of Rome Tor Vergata has exploited these features to prepare sensor arrays based on different transducers and aimed at several applications. These kinds of devices have been reported as electronic noses (gaseous phase analytes) and electronic tongues (liquid phase analytes) to underline that their working mechanisms are tentatively similar to that of biological senses. We report here some of the results obtained.

Effect of solvent on the electronic absorption spectral properties of some mixed β-octasubstituted Zn(II)-tetraphenylporphyrins

A series of mixed β-octasubstituted Zn(II)-porphyrins, 2,3,12,13-tetra(chloro/cyano/methyl)-5,7,8,10,15,17,18,20-octaphenylporphinato zinc(II), ZnTPP(Ph)₄X₄ (X=CN, Cl and CH₃) have been examined by electronic absorption spectroscopy in various solvents. These Zn(II)-porphyrins exhibited varying degree of red-shift of absorption bands as high as 20-30nm in 'B' band and 50-60nm in longest wavelength band, 'Q(0,0)' band in polar solvents relative to that found in nonpolar solvents. The red-shift of B and Q(0,0) bands showed an unusual trend, ZnTPP(Ph)₄(CN)₄>ZnTPP(Ph)₄(CH₃)₄>ZnTPP(Ph)₄Cl₄ but fails to follow an anticipated anodic shift in first porphyrin ring oxidation (vs Ag/AgCl) potential: ZnTPP(Ph)₄(CN)₄ (1.02V)>ZnTPP(Ph)₄Cl₄ (0.74V)>ZnTPP(Ph)₄(CH₃)₄ (0.38V). Such a trend suggests the combined effect of non-planarity of the macrocycle and electronic effect of the peripheral substituents. The equilibrium constants for the binding of nitrogenous bases with the Zn(II)-porphyrins showed as high as twenty fold increase for ZnTPP(Ph)₄X₄ (X=Br and CN) relative to ZnTPP(Ph)₄(CH₃)₄ and follow the order: ZnTPP(Ph)₄(CN)₄>ZnTPP(Ph)₄Br₄>ZnTPP(Ph)₄(CH₃)₄≤ZnTPP which is approximately in line with an increase in anodic shift of their first ring redox potentials (ZnTPP(Ph)₄(CN)₄ (1.02V)>ZnTPP(Ph)₄Br₄ (0.72V)>ZnTPP (0.84V)>ZnTPP(Ph)₄(CH₃)₄) (0.38V).

Dramatic improvement of stability by in situ linker cyclization of a metal–organic framework

Towards 3D graphenes: we demonstrate an effective two-step strategy for accessing crystalline porous covalent networks of highly conjugated π-electron systems.