Diazonium functionalized graphene: microstructure, electric, and magnetic properties

Effects of Multidimensional Carbon-Based Nanomaterials on the Low-Carbon and High-Performance Cementitious Composites: A Critical Review

Cementitious composites are ubiquitous in construction, and more and more research is focused on improving mechanical properties and environmental effects. However, the jury is still out on which material can achieve low-carbon and high-performance cementitious composites. This article compares the mechanical and environmental performance of zero-dimensional fullerenes, one-dimensional carbon nanotubes (CNTs), two-dimensional graphene oxide (GO), and three-dimensional nano-graphite platelets (NGPs) on cementitious composites. The literature review shows that two-dimensional (2D) GO has the best mechanical and environmental performance, followed by 3D NGPs, 1D CNTs, and 0D fullerenes. Specifically, GO stands out for its lower energy consumption (120-140 MJ/kg) and CO2 emissions (0.17 kg/kg). When the optimal dosage (0.01-0.05 wt%) of GO is selected, due to its high specific surface area and strong adhesion to the matrix, the compressive strength of the cementitious composites is improved by nearly 50%. This study will help engineers and researchers better utilize carbon-based nanomaterials and provide guidance and direction for future research in related fields.

Covalently Functionalized Nanopores for Highly Selective Separation of Monovalent Ions

Biological ion channels possess prominent ion transport performances attributed to their critical chemical groups across the continuous nanoscale filters. However, it is still a challenge to imitate these sophisticated performances in artificial nanoscale systems. Herein, this work develops the strategy to fabricate functionalized graphene nanopores in pioneer based on the synergistic regulation of the pore size and chemical properties of atomically thin confined structure through decoupling etching combined with in situ covalent modification. The modified graphene nanopores possess asymmetric ion transport behaviors and efficient monovalent metal ions sieving (K+ /Li+ selectivity ≈48.6). Meanwhile, it also allows preferential transport for cations, the resulting membranes exhibit a K+ /Cl- selectivity of 76 and a H+ /Cl- selectivity of 59.3. The synergistic effects of steric hindrance and electrostatic interactions imposing a higher energy barrier for Cl- or Li+ across nanopores lead to ultra-selective H+ or K+ transport. Further, the functionalized graphene nanopores generate a power density of 25.3 W m-2 and a conversion efficiency of 33.9%, showing potential application prospects in energy conversion. The theoretical studies quantitatively match well with the experimental results. The feasible preparation of functionalized graphene nanopores paves the way toward direct investigation on ion transport mechanism and advanced design in devices.

Mechanistic Insights on Functionalization of Graphene with Ozone

The exposure of graphene to O3 results in functionalization of its lattice with epoxy, even at room temperature. This reaction is of fundamental interest for precise lattice patterning, however, is not well understood. Herein, using van der Waals density functional theory (vdW-DFT) incorporating spin-polarized calculations, we find that O3 strongly physisorbs on graphene with a binding energy of -0.46 eV. It configures in a tilted position with the two terminal O atoms centered above the neighboring graphene honeycombs. A dissociative chemisorption follows by surpassing an energy barrier of 0.75 eV and grafting an epoxy group on graphene reducing the energy of the system by 0.14 eV from the physisorbed state. Subsequent O3 chemisorption is preferred on the same honeycomb, yielding two epoxy groups separated by a single C-C bridge. We show that capturing the onset of spin in oxygen during chemisorption is crucial. We verify this finding with experiments where an exponential increase in the density of epoxy groups as a function of reaction temperature yields an energy barrier of 0.66 eV, in agreement with the DFT prediction. These insights will help efforts to obtain precise patterning of the graphene lattice.

Graphene: Preparation, tailoring, and modification

Graphene is a 2D material with fruitful electrical properties, which can be efficiently prepared, tailored, and modified for a variety of applications, particularly in the field of optoelectronic devices thanks to its planar hexagonal lattice structure. To date, graphene has been prepared using a variety of bottom-up growth and top-down exfoliation techniques. To prepare high-quality graphene with high yield, a variety of physical exfoliation methods, such as mechanical exfoliation, anode bonding exfoliation, and metal-assisted exfoliation, have been developed. To adjust the properties of graphene, different tailoring processes have been emerged to precisely pattern graphene, such as gas etching and electron beam lithography. Due to the differences in reactivity and thermal stability of different regions, anisotropic tailoring of graphene can be achieved by using gases as the etchant. To meet practical requirements, further chemical functionalization at the edge and basal plane of graphene has been extensively utilized to modify its properties. The integration and application of graphene devices is facilitated by the combination of graphene preparation, tailoring, and modification. This review focuses on several important strategies for graphene preparation, tailoring, and modification that have recently been developed, providing a foundation for its potential applications.

Identifying the Active Sites of Heteroatom Graphene as a Conductive Membrane for the Electrochemical Filtration of Organic Contaminants

The dopants of sulfur, nitrogen, or both, serving as the active sites, into the graphitic framework of graphene is an efficient strategy to improve the electrochemical performance of electrochemical membrane filtration. However, the covalent bonds between the doped atoms and the substrate that form different functional groups have a significant role in the specific activity for pollutant degradation. Herein, we found that the singly doped heteroatom graphene (NG and SG) achieved superior removal efficiency of pollutants as compared with that of the double doped heteroatom graphene (SNG). Mechanism studies showed that the doped N of NG presented as graphitic N and substantially increased electron transfer, whereas the doped S of SG posed as -C-SOx-C- provided more adsorption sites to improve electrochemical performance. However, in the case of SNG, the co-doped S and N cannot form the efficient graphitic N and -C-SOx-C- for electrochemical degradation, resulting in a low degradation efficiency. Through the fundamental insights into the bonding of the doped heteroatom on graphene, this work furnishes further directives for the design of desirable heteroatom graphene for membrane filtration.

Grafting Ink for Direct Writing: Solvation Activated Covalent Functionalization of Graphene

Covalent functionalization of graphene (CFG) has shown attractive advantages in tuning the electronic, mechanical, optical, and thermal properties of graphene. However, facile, large-scale, controllable, and highly efficient CFG remains challenging and often involves highly reactive and volatile compounds, requiring complex control of the reaction conditions. Here, a diazonium-based grafting ink consisting of only two components, i.e., an aryl diazonium salt and the solvent dimethyl sulfoxide (DMSO) is presented. The efficient functionalization is attributed to the combination of the solvation of the diazonium cations by DMSO and n-doping of graphene by DMSO, thereby promoting electron transfer (ET) from graphene to the diazonium cations, resulting in the generation of aryl radicals which subsequently react with the graphene. The grafting density of CFG is controlled by the reaction time and very high levels of functionalization, up to the failing of the Tuinstra-Koenig (T-K) relation, while the functionalization layer remains at monolayer height. The grafting ink, effective for days at room temperature, can be used at ambient conditions and renders the patterning CFG by direct writing as easy as writing on paper. In combination with thermal sample treatment, reversible functionalization is possible by subsequent writing/erasing cycles.

Evolution of Graphene Patterning: From Dimension Regulation to Molecular Engineering

The realization that nanostructured graphene featuring nanoscale width can confine electrons to open its bandgap has aroused scientists' attention to the regulation of graphene structures, where the concept of graphene patterns emerged. Exploring various effective methods for creating graphene patterns has led to the birth of a new field termed graphene patterning, which has evolved into the most vigorous and intriguing branch of graphene research during the past decade. The efforts in this field have resulted in the development of numerous strategies to structure graphene, affording a variety of graphene patterns with tailored shapes and sizes. The established patterning approaches combined with graphene chemistry yields a novel chemical patterning route via molecular engineering, which opens up a new era in graphene research. In this review, the currently developed graphene patterning strategies is systematically outlined, with emphasis on the chemical patterning. In addition to introducing the basic concepts and the important progress of traditional methods, which are generally categorized into top-down, bottom-up technologies, an exhaustive review of established protocols for emerging chemical patterning is presented. At the end, an outlook for future development and challenges is proposed.

Covalent organic functionalization of graphene nanosheets and reduced graphene oxide via 1,3-dipolar cycloaddition of azomethine ylide

Organic functionalization of graphene is successfully performed via 1,3-dipolar cycloaddition of azomethine ylide in the liquid phase. The comparison between 1-methyl-2-pyrrolidinone and N,N-dimethylformamide as dispersant solvents, and between sonication and homogenization as dispersion techniques, proves N,N-dimethylformamide and homogenization as the most effective choice. The functionalization of graphene nanosheets and reduced graphene oxide is confirmed using different techniques. Among them, energy-dispersive X-ray spectroscopy allows to map the pyrrolidine ring of the azomethine ylide on the surface of functionalized graphene, while micro-Raman spectroscopy detects new features arising from the functionalization, which are described in agreement with the power spectrum obtained from ab initio molecular dynamics simulation. Moreover, X-ray photoemission spectroscopy of functionalized graphene allows the quantitative elemental analysis and the estimation of the surface coverage, showing a higher degree of functionalization for reduced graphene oxide. This more reactive behavior originates from the localization of partial charges on its surface due to the presence of oxygen defects, as shown by the simulation of the electrostatic features. Functionalization of graphene using 1,3-dipolar cycloaddition is shown to be a significant step towards the controlled synthesis of graphene-based complex structures and devices at the nanoscale.

Synopsis on Pharmotechnological Approaches in Diagnostic to Management Strategies in Fighting Against COVID-19

Nanoparticles (NPs) are projected to play a significant role in fighting against coronavirus disease (COVID-19). The various properties of NPs like magnetic and optical can be exploited to build diagnostic test kits. The unembellished morphological and physiochemical resemblances of SARS-CoV-2 with synthetic NPs make them a potent tool for mediation. Nanoparticles can be analytically functionalized with different proteins, polymers, and functional groups to perform specific inhibitory functions while also serving as delivery vehicles . Moreover, NPs can also be employed to prepare broad-spectrum respiratory drugs and vaccines that can guard seasonal flu and prepare the human race for the pandemic in the future. The present review outlines the role of NPs in detection, diagnostic and therapeutic against members of the coronavirus family. We emphasize nanomaterial-based approaches to address coronaviruses in general and SARS-CoV-2 in particular. We discuss NPs based detection systems like graphene (G-FET), biosensors, and plasmonic photothermal associated sensors. Inorganic, organic virus-like & self-assembly protein (VLP), and photodynamic inactivation of SARS-CoV-2 are also presented as therapeutic approaches exploiting NPs.

Critical Role of Functional Groups Containing N, S, and O on Graphene Surface for Stable and Fast Charging Li-S Batteries

Lithium-sulfur (Li-S) batteries are considered one of the most promising energy storage technologies, possibly replacing the state-of-the-art lithium-ion (Li-ion) batteries owing to their high energy density, low cost, and eco-compatibility. However, the migration of high-order lithium polysulfides (LiPs) to the lithium surface and the sluggish electrochemical kinetics pose challenges to their commercialization. The interactions between the cathode and LiPs can be enhanced by the doping of the carbon host with heteroatoms, however with relatively low doping content (<10%) in the bulk of the carbon, which can hardly interact with LiPs at the host surface. In this study, the grafting of versatile functional groups with designable properties (e.g., catalytic effects) directly on the surface of the carbon host is proposed to enhance interactions with LiPs. As model systems, benzene groups containing N/O and S/O atoms are vertically grafted and uniformly distributed on the surface of expanded reduced graphene oxide, fostering a stable interface between the cathode and LiPs. The combination of experiments and density functional theory calculations demonstrate improvements in chemical interactions between graphene and LiPs, with an enhancement in the electrochemical kinetics, power, and energy densities.

A versatile route to edge-specific modifications to pristine graphene by electrophilic aromatic substitution

Electrophilic aromatic substitution produces edge-specific modifications to CVD graphene and graphene nanoplatelets that are suitable for specific attachment of biomolecules.

Emerging Trends in the Syntheses of Heterocycles Using Graphene-based Carbocatalysts: An Update

Graphene-based carbocatalysts owing to numerous amazing properties such as large specific surface area, high intrinsic mobility, excellent thermal and electrical conductivities, chemical stability, ease of functionalization, simple method of preparation, effortless recovery and recyclability have gained a superior position amongst the conventional homogeneous and heterogeneous catalysts. In this review, an endeavor has been made to highlight the syntheses of diverse heterocyclic compounds catalyzed by graphene-based catalysts. Further, the study also reveals that all the catalysts could be reused several times without significant loss in their catalytic activity. Additionally, most of the reactions catalyzed by graphene-based carbocatalysts were carried out at ambient temperature and under solvent-free conditions. Thus, the graphene-based catalysts do not merely act as efficient catalysts but also serve as sustainable, green catalysts. This review is divided into various sub-sections, each of which comprehensively describes the preparation of a particular heterocyclic scaffold catalyzed by graphene-derived carbocatalyst in addition to synthesis of graphene oxide and reduced graphene oxide, functionalization, and structural features governing their catalytic properties. Synthesis of heterocycles catalyzed by graphene-based carbocatalysts.

2-Amino-3-chloro-1,4-naphthoquinone-covalent modification of graphene nanosheets for efficient electrochemical energy storage

The 2-amino-3-chloro-1,4-naphthoquinone molecules are covalently grafted onto graphene nanosheets by diazotization for efficient electrochemical energy storage.

Alkyl-Modified Gold Surfaces: Characterization of the Au-C Bond

The surface of gold can be modified with alkyl groups through a radical crossover reaction involving alkyliodides or bromides in the presence of a sterically hindered diazonium salt. In this paper, we characterize the Au-C(alkyl) bond by surface-enhanced Raman spectroscopy (SERS); the corresponding peak appears at 387 cm^-1 close to the value obtained by theoretical modeling. The Au-C(alkyl) bond energy is also calculated, it reaches -36.9 kcal mol^-1 similar to that of an Au-S-alkyl bond but also of an Au-C(aryl) bond. In agreement with the similar energies of Au-C(alkyl) and Au-S-(alkyl), we demonstrate experimentally that these groups can be exchanged on the surface of gold.

Post-Graphene 2D Chemistry: The Emerging Field of Molybdenum Disulfide and Black Phosphorus Functionalization

The current state of the chemical functionalization of three types of single sheet 2D materials, namely, graphene, molybdenum disulfide (MoS2 ), and black phosphorus (BP) is summarized. Such 2D sheet polymers are currently an emerging field at the interface of synthetic chemistry, physics, and materials science. Both covalent and non-covalent functionalization of sheet architectures allows a systematic modification of their properties, that is, an improvement of solubility and processability, the prevention of re-aggregation, or band-gap tuning. Next to successful functionalization concepts, fundamental challenges are also addressed. These include the insolubility and polydispersity of most 2D sheet polymers, the development of suitable characterization tools, the identification of effective binding strategies, the chemical activation of the usually rather unreactive basal planes for covalent addend binding, and the regioselectivity of plane addition reactions. Although a number of these questions remain elusive in this Review, the first promising concepts to overcome such hurdles are presented.

Graphene Field Effect Transistors for Biomedical Applications: Current Status and Future Prospects

Since the discovery of the two-dimensional (2D) carbon material, graphene, just over a decade ago, the development of graphene-based field effect transistors (G-FETs) has become a widely researched area, particularly for use in point-of-care biomedical applications. G-FETs are particularly attractive as next generation bioelectronics due to their mass-scalability and low cost of the technology’s manufacture. Furthermore, G-FETs offer the potential to complete label-free, rapid, and highly sensitive analysis coupled with a high sample throughput. These properties, coupled with the potential for integration into portable instrumentation, contribute to G-FETs’ suitability for point-of-care diagnostics. This review focuses on elucidating the recent developments in the field of G-FET sensors that act on a bioaffinity basis, whereby a binding event between a bioreceptor and the target analyte is transduced into an electrical signal at the G-FET surface. Recognizing and quantifying these target analytes accurately and reliably is essential in diagnosing many diseases, therefore it is vital to design the G-FET with care. Taking into account some limitations of the sensor platform, such as Debye–Hükel screening and device surface area, is fundamental in developing improved bioelectronics for applications in the clinical setting. This review highlights some efforts undertaken in facing these limitations in order to bring G-FET development for biomedical applications forward.

Electrophoretic Approach for the Simultaneous Deposition and Functionalization of Reduced Graphene Oxide Nanosheets with Diazonium Compounds: Application for Lysozyme Sensing in Serum

Electrophoretic deposition (EPD) of reduced graphene oxide nanosheets (rGO) offers several advantages over other surface coating approaches, including process simplicity, uniformity of the deposited films, and good control of the film thickness. The EPD conditions might also be of interest for the reduction of diazonium salts, which upon the release of N₂ molecules and generation of radicals, can form covalent bonds with the sp² hybridized carbon lattice atoms of rGO films. In this work, we report on the coating of gold electrodes in one step with rGO/polyethylenimine (PEI) thin films and their simultaneous modification using different phenyl (Ph) diazonium salt precursors bearing various functionalities such as -B(OH)₂, -COOH, and -C≡CH. We show further the interest of such interfaces for designing highly sensitive sensing platforms. Azide-terminated lysozyme aptamers were clicked onto the rGO/PEI/Ph-alkynyl matrix and used for the sensing of lysozyme levels in patients suffering from inflammatory bowel disease (IBD), where lysozyme levels are up-regulated. The approach attained the required demand for the determination of lysozyme level in patients suffering from IBD with a 200 fM detection limit and a linear range up to 20 pM without signal amplification.

Experimental studies on magnetization in the excited state by using the magnetic field effect of light scattering based on multi-layer graphene particles suspended in organic solvents

This article reports on experimental studies on magnetic polarization in the excited state by using magnetic field effects of light scattering (MFE_LS) together with a photoexcitation beam based on fluorinated multi-layer graphene (FG) particles suspended in an organic solvent. We observe that a magnetic field can change the light scattering of a 532 nm laser beam from the suspended FG particles, generating a MFE_LS signal with an amplitude of 60% at 900 mT. This phenomenon indicates that the suspended FG particles experience a magnetization force, leading to an orientation of the suspended FG particles in a magnetic field. We find that the magnetization force is a function of a solvent dielectric constant, an analogue phenomenon similar to magneto-electric coupling. More importantly, in the excited state the suspended FG particles exhibit more pronounced MFE_LS, as compared with the ground state, when the magnetic field effects of light scattering are combined with a photoexcitation beam of 325 nm. Clearly, the FG particles in the excited state possess a stronger magnetization relative to the ground state. This excitation-enhanced magnetization suggests an interaction between the magnetization from the localized spins and the polarization from delocalized π electrons in the FG particles. Therefore, the magnetic field effects of light scattering provide a convenient experimental method to investigate the magnetization of nanoparticles in the excited state.

Current and future directions in electron transfer chemistry of graphene

The participation of graphene in electron transfer chemistry, where an electron is transferred between graphene and other species, encompasses many important processes that have shown versatility and potential for use in important applications.

Chemical functionalization and characterization of graphene-based materials

This review offers an overview on the chemical functionalization, characterization and applications of graphene-based materials.

Protection of carbon steel corrosion in 3.5% NaCl medium by aryldiazonium grafted graphene coatings

Modification of CS/G by 1,8 ND containing two phenyl rings and two azo groups led to higher protection efficiency.

Tunable Sub-nanopores of Graphene Flake Interlayers with Conductive Molecular Linkers for Supercapacitors

Although there are numerous reports of high performance supercapacitors with porous graphene, there are few reports to control the interlayer gap between graphene sheets with conductive molecular linkers (or molecular pillars) through a π-conjugated chemical carbon-carbon bond that can maintain high conductivity, which can explain the enhanced capacitive effect of supercapacitor mechanism about accessibility of electrolyte ions. For this, we designed molecularly gap-controlled reduced graphene oxides (rGOs) via diazotization of three different phenyl, biphenyl, and para-terphenyl bis-diazonium salts (BD1-3). The graphene interlayer sub-nanopores of rGO-BD1-3 are 0.49, 0.7, and 0.96 nm, respectively. Surprisingly, the rGO-BD2 0.7 nm gap shows the highest capacitance in 1 M TEABF4 having 0.68 nm size of cation and 6 M KOH having 0.6 nm size of hydrated cation. The maximum energy density and power density of the rGO-BD2 were 129.67 W h kg(-1) and 30.3 kW kg(-1), respectively, demonstrating clearly that the optimized sub-nanopore of the rGO-BDs corresponding to the electrolyte ion size resulted in the best capacitive performance.

Electrochemistry of ferrocene derivatives on highly oriented pyrolytic graphite (HOPG): quantification and impacts of surface adsorption

Cyclic voltammetry of three ferrocene derivatives - (ferrocenylmethyl)trimethylammonium (FcTMA(+)), ferrocenecarboxylic acid (FcCOOH), and ferrocenemethanol (FcCH2OH) - in aqueous solutions shows that the reduced form of the first two redox species weakly adsorbs onto freshly cleaved surfaces of highly oriented pyrolytic graphite (HOPG), with the fractional surface coverage being in excess of 10% of a monolayer at a bulk concentration level of 0.25 mM for both compounds. FcCH2OH was found to exhibit greater and stronger adsorption (up to a monolayer) for the same bulk concentration. The adsorption of FcTMA(+) on freshly cleaved surfaces of high quality (low step edge density) and low quality (high step edge density) HOPG is the same within experimental error, suggesting that the amount of step edges has no influence on the adsorption process. The amount of adsorption of FcTMA(+) is the same (within error) for low quality HOPG, irrespective of whether the surface is freshly cleaved or left in air for up to 12 hours, while - with aging - high quality HOPG adsorbs notably more FcTMA(+). The formation of an airborne contaminating film is proposed to be responsible for the enhanced entrapment of FcTMA(+) on aged high quality HOPG surfaces, while low quality surfaces appear less prone to the accumulation of such films. The impact of the adsorption of ferrocene derivatives on graphite for voltammetric studies is discussed. Adsorption is quantified by developing a theory and methodology to process cyclic voltammetry data from peak current measurements. The accuracy and applicability, as well as limits of the approach, are demonstrated for various adsorption isotherms.

Covalent Reactions on Chemical Vapor Deposition Grown Graphene Studied by Surface-Enhanced Raman Spectroscopy

Graphene is a material of unmatched properties and eminent potential in disciplines ranging from physics, to chemistry, to biology. Its advancement to applications with a specific function requires rational design and fine tuning of its properties, and covalent introduction of various substituents answers this requirement. We challenged the obstacle of non-trivial and harsh procedures for covalent functionalization of pristine graphene and developed a protocol for mild nucleophilic introduction of organic groups in the gas phase. The painstaking analysis problem of monolayered materials was addressed by using surface-enhanced Raman spectroscopy, which allowed us to monitor and characterize in detail the surface composition. These deliverables provide a toolbox for reactivity of fluorinated graphene under mild reaction conditions, providing structural freedom of the species to-be-grafted to the single-layer graphene.

Transfer of Chemically Modified Graphene with Retention of Functionality for Surface Engineering

Single-layer graphene chemically reduced by the Birch process delaminates from a Si/SiOx substrate when exposed to an ethanol/water mixture, enabling transfer of chemically functionalized graphene to arbitrary substrates such as metals, dielectrics, and polymers. Unlike in previous reports, the graphene retains hydrogen, methyl, and aryl functional groups during the transfer process. This enables one to functionalize the receiving substrate with the properties of the chemically modified graphene (CMG). For instance, magnetic force microscopy shows that the previously reported magnetic properties of partially hydrogenated graphene remain after transfer. We also transfer hydrogenated graphene from its copper growth substrate to a Si/SiOx wafer and thermally dehydrogenate it to demonstrate a polymer- and etchant-free graphene transfer for potential use in transmission electron microscopy. Finally, we show that the Birch reduction facilitates delamination of CMG by weakening van der Waals forces between graphene and its substrate.

Fine tuning of graphene properties by modification with aryl halogens

Graphene and its derivatives belong to one of the most intensively studied materials. The radical reaction using halogen derivatives of arene-diazonium salts can be used for effective control of graphene's electronic properties. In our work we investigated the influence of halogen atoms (fluorine, chlorine, bromine and iodine) as well as their position on the benzene ring towards the electronic and electrochemical properties of modified graphenes. The electronegativity as well as the position of the halogen atoms on the benzene ring has crucial influence on graphene's properties due to the inductive and mesomeric effects. The results of resistivity measurement are in good agreement with the theoretical calculations of electron density within chemically modified graphene sheets. Such simple chemical modifications of graphene can be used for controllable and scalable synthesis of graphene with tunable transport properties.

Robust Electrografting on Self-Organized 3D Graphene Electrodes

Improving graphene-based electrode fabrication processes and developing robust methods for its functionalization are two key research routes to develop new high-performance electrodes for electrochemical applications. Here, a self-organized three-dimensional (3D) graphene electrode processed by pulsed laser deposition with thermal annealing is reported. This substrate shows great performance in electron transfer kinetics regarding ferrocene redox probes in solution. A robust electrografting strategy for covalently attaching a redox probe onto these graphene electrodes is also reported. The modification protocol consists of a combination of diazonium salt electrografting and click chemistry. An alkyne-terminated phenyl ring is first electrografted onto the self-organized 3D graphene electrode by in situ electrochemical reduction of 4-ethynylphenyl diazonium. Then the ethynylphenyl-modified surface efficiently reacts with the redox probe bearing a terminal azide moiety (2-azidoethyl ferrocene) by means of Cu(I)-catalyzed alkyne-azide cycloaddition. Our modification strategy applied to 3D graphene electrodes was analyzed by means of atomic force microscopy, scanning electron microscopy, Raman spectroscopy, cyclic voltammetry, and X-ray photoelectron spectroscopy (XPS). For XPS chemical surface analysis, special attention was paid to the distribution and chemical state of iron and nitrogen in order to highlight the functionalization of the graphene-based substrate by electrochemically grafting a ferrocene derivative. Dense grafting was observed, offering 4.9 × 10(-10) mol cm(-2) surface coverage and showing a stable signal over 22 days. The electrografting was performed in the form of multilayers, which offers higher ferrocene loading than a dense monolayer on a flat surface. This work opens highly promising perspectives for the development of self-organized 3D graphene electrodes with various sensing functionalities.

Toward graphene chloride: chlorination of graphene and graphene oxide

Chlorinated graphene derivates with chlorine concentration exceeding 11 at% were synthesized by high temperature exfoliation in chlorine atmosphere. Halogen graphenes have a great potential for electronic and electrochemical devices.

A versatile method for the preparation of carbon-rhodium hybrid catalysts on graphene and carbon black

A direct and rapid access to highly efficient and recyclable carbon–rhodium hybrid catalysts for the hydrosilylation reaction is presented.

Strategies for combining the selectivity and efficiency of homogeneous organometallic catalysts with the versatility of heterogeneous catalysts are urgently needed. Herein a direct and modular methodology is presented that provides rapid access to well-defined carbon–rhodium hybrid catalysts. A pre-synthesized Rh(i) complex containing a carbene-triazole ligand was found to be stable for direct immobilization onto unactivated graphene, carbon black and glassy carbon electrodes. Characterization of the heterogeneous systems using X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), inductively coupled plasma-optical emission spectroscopy/mass spectrometry (ICP-OES/MS), Raman spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) confirmed the well-defined nature of the hybrid catalysts. The hybrid catalysts show excellent activity, comparable to that of the homogeneous system for the hydrosilylation of diphenylacetylene, with turnover numbers ranging from 5000 to 48 000. These catalysts are the best reported to date for the hydrosilylation of diphenylacetylene. In common with conventional heterogeneous catalysts, high reusability, due to a lack of Rh metal leaching, was also observed for all carbon–rhodium complexes under investigation.

Covalent nitrophenyl diazonium functionalized silicene for spintronics: a first-principles study

We predict some novel electronic and magnetic properties of a functionalized silicene sheet by nitrophenyl diazonium (NPD) using first-principles calculations in the framework of density functional theory with dispersion corrections. Our calculations at the HSE06 level show that for the three coverage ratios of NPD considered in this work (i.e., NPD : Si = 1 : 8, 1 : 18 and 1 : 32), spin-polarized electronic structures can be always realized with NPD adsorption although the bandgap decreases upon reducing the NPD coverage ratio. The quasi-localized pz electrons of Si are identified to be responsible for the ferrimagnetism in these two-dimensional systems. Remarkably, the system with the NPD : Si = 1 : 8 ratio is predicted to be a bipolar magnetic semiconductor. As such, half-metallicity can be realized by applying a gate voltage with reversible spin polarization, making NPD-1/8 a potential candidate for future spintronic applications. This work offers a new tailor-made functionalization approach to realize magnetic semiconducting silicene.

3D polyaniline porous layer anchored pillared graphene sheets: enhanced interface joined with high conductivity for better charge storage applications

Here, we report synthesis of a 3-dimensional (3D) porous polyaniline (PANI) anchored on pillared graphene (G-PANI-PA) as an efficient charge storage material for supercapacitor applications. Benzoic acid (BA) anchored graphene, having spatially separated graphene layers (G-Bz-COOH), was used as a structure controlling support whereas 3D PANI growth has been achieved by a simple chemical oxidation of aniline in the presence of phytic acid (PA). The BA groups on G-Bz-COOH play a critical role in preventing the restacking of graphene to achieve a high surface area of 472 m(2)/g compared to reduced graphene oxide (RGO, 290 m(2)/g). The carboxylic acid (-COOH) group controls the rate of polymerization to achieve a compact polymer structure with micropores whereas the chelating nature of PA plays a crucial role to achieve the 3D growth pattern of PANI. This type of controlled interplay helps G-PANI-PA to achieve a high conductivity of 3.74 S/cm all the while maintaining a high surface area of 330 m(2)/g compared to PANI-PA (0.4 S/cm and 60 m(2)/g). G-PANI-PA thus conceives the characteristics required for facile charge mobility during fast charge-discharge cycles, which results in a high specific capacitance of 652 F/g for the composite. Owing to the high surface area along with high conductivity, G-PANI-PA displays a stable specific capacitance of 547 F/g even with a high mass loading of 3 mg/cm(2), an enhanced areal capacitance of 1.52 F/cm(2), and a volumetric capacitance of 122 F/cm(3). The reduced charge-transfer resistance (RCT) of 0.67 Ω displayed by G-PANI-PA compared to pure PANI (0.79 Ω) stands out as valid evidence of the improved charge mobility achieved by the system by growing the 3D PANI layer along the spatially separated layers of the graphene sheets. The low RCT helps the system to display capacitance retention as high as 65% even under a high current dragging condition of 10 A/g. High charge/discharge rates and good cycling stability are the other highlights of the supercapacitor system derived from this composite material.

Azo dye functionalized graphene nanoplatelets for selective detection of bisphenol A and hydrogen peroxide

A new electrochemical sensor is developed based on graphene nanoplatelets functionalized with tri-azo dye (direct blue 71) for selective and highly sensitive detection of bisphenol A and hydrogen peroxide in pH 7 phosphate buffered saline solution.

Electrografting of alkyl films at low driving force by diverting the reactivity of aryl radicals derived from diazonium salts

Alkyl and partial perfluoroalkyl groups are strongly attached to carbon surfaces through (i) the abstraction of the iodine atom from an iodoalkane by the sterically hindered 2,6-dimethylphenyl radical and (ii) the reaction of the ensuing alkyl radical with the carbon surface. Since the 2,6-dimethylphenyl radical is obtained at -0.25 V/Ag/AgCl by reducing the corresponding diazonium salt, the electrografting reaction is facilitated by ∼1.7 V by comparison with the direct electrografting of the iodo compounds. Layers of various thicknesses, including monolayers, are obtained by controlling the time duration of the electrolysis. The grafted films are characterized by electrochemistry, IR, XPS, ellipsometry, and water contact angles.

Scanning-Raman-microscopy for the statistical analysis of covalently functionalized graphene

We report on the introduction of a systematic method for the quantitative and reliable characterization of covalently functionalized graphene based on Scanning-Raman-Microscopy (SRM). This allows for recording and analyzing several thousands of Raman spectra per sample and straightforward display of various Raman properties and their correlations with each other in histograms or coded 2D-plots. In this way, information about the functionalization efficiency of a given reaction, the reproducibility of the statistical analysis, and the sample homogeneity can be easily deduced. Based on geometric considerations, we were also able to provide, for the first time, a correlation between the mean defect distance of densely packed point defects and the Raman ID/IG ratio directly obtained from the statistical analysis. This proved to be the prerequisite for determining the degree of functionalization, termed θ. As model compounds, we have studied a series of arylated graphenes (GPh) for which we have developed new synthetic procedures. Both graphite and graphene grown by chemical vapor deposition (CVD) were used as starting materials. The best route toward GPh consisted of the initial reduction of graphite with a Na/K alloy in 1,2-dimethoxyethane (DME) as it yields the highest overall homogeneity of products reflected in the widths of the Raman ID/IG histograms. The Raman results correlate nicely with parallel thermogravimetric analysis (TGA) coupled with mass spectrometry (MS) studies.