Covalent Immobilization of Proteins on 3D Poly(acrylic acid) Brushes: Mechanism Study and a More Effective and Controllable Process

Effect of Saccharides Coating on Antibacterial Potential and Drug Loading and Releasing Capability of Plasma Treated Polylactic Acid Films

More than half of the hospital-associated infections worldwide are related to the adhesion of bacteria cells to biomedical devices and implants. To prevent these infections, it is crucial to modify biomaterial surfaces to develop the antibacterial property. In this study, chitosan (CS) and chondroitin sulfate (ChS) were chosen as antibacterial coating materials on polylactic acid (PLA) surfaces. Plasma-treated PLA surfaces were coated with CS either direct coating method or the carbodiimide coupling method. As a next step for the combined saccharide coating, CS grafted samples were immersed in ChS solution, which resulted in the polyelectrolyte complex (PEC) formation. Also in this experiment, to test the drug loading and releasing efficiency of the thin film coatings, CS grafted samples were immersed into lomefloxacin-containing ChS solution. The successful modifications were confirmed by elemental composition analysis (XPS), surface topography images (SEM), and hydrophilicity change (contact angle measurements). The carbodiimide coupling resulted in higher CS grafting on the PLA surface. The coatings with the PEC formation between CS-ChS showed improved activity against the bacteria strains than the separate coatings. Moreover, these interactions increased the lomefloxacin amount adhered to the film coatings and extended the drug release profile. Finally, the zone of inhibition test confirmed that the CS-ChS coating showed a contact killing mechanism while drug-loaded films have a dual killing mechanism, which includes contact, and release killing.

Highly sensitive pregnancy test kit via oriented antibody conjugation on brush-type ligand-coated quantum beads

Lateral flow assays (LFA) enable development of portable and rapid diagnostic kits; however, their capacity to detect low levels of disease markers remains poor. Here, we report a highly sensitive pregnancy test kit as a proof of concept, by combining brush-type ligand-coated quantum beads (B-type QBs) and nanobody, which can control the antibody orientation and enhance sensitivity. The brush-type ligand provided excellent dispersion stability and high-binding capacity toward antibody. Fc-binding nanobody increased the antigen-binding capacity of conjugated antibodies on the B-type QBs. To facilitate convenient acquisition of the LFA results, we developed a smartphone-based reader with a 3D-printed optical imaging module, and validated the diagnostic performance of the sensing platform. The pregnancy test kit achieved a 5.1 pg mL^-1 limit of detection, corresponding to the levels for early-stage detection of heart disease and malaria. Our LFA application can potentially be expanded to diagnosis other diseases by simply changing the antibody pair in the kit.

Hairy Fluorescent Nanospheres Based on Polyelectrolyte Brush for Highly Sensitive Determination of Cu(II)

Currently, it is an ongoing challenge to develop fluorescent nanosphere detectors that are uniform, non-toxic, stable and bearing a large number of functional groups on the surface for further applications in a variety of fields. Here, we have synthesized hairy nanospheres (HNs) with different particle sizes and a content range of carboxyl groups from 4 mmol/g to 9 mmol/g. Based on this, hairy fluorescent nanospheres (HFNs) were prepared by the traditional coupling method (TCM) or adsorption-induced coupling method (ACM). By comparison, it was found that high brightness HFNs are fabricated based on HNs with poly (acrylic acid) brushes on the surface via ACM. The fluorescence intensity of hairy fluorescent nanospheres could be controlled by tuning the content of 5-aminofluorescein (5-AF) or the carboxyl groups of HNs easily. The carboxyl content of the HFNs could be as high as 8 mmol/g for further applications. The obtained HFNs are used for the detection of heavy metal ions in environmental pollution. Among various other metal ions, the response to Cu (II) is more obvious. We demonstrated that HFNs can serve as a selective probe and for the separation and determination of Cu(II) ions with a linear range of 0-0.5 μM and a low detection limit of 64 nM.

Bacterial cellulose membrane conjugated with plant-derived osteopontin: Preparation and its potential for bone tissue regeneration

Bacterial cellulose membrane (BCM) has been recently recognized as a new generation of carbohydrate-based nanomaterial that possesses a great potential in tissue engineering applications. This research aims to develop an active non-resorbable guided tissue regeneration (GTR) membrane from BCM by conjugating with plant-derived recombinant human osteopontin (p-rhOPN), an economically produced and RGD-containing biomolecule. The BCM was initially grafted with poly(acrylic acid) (PAA) brushes to form poly(acrylic acid)-grafted BCM. Multiple carboxyl groups introduced to the BCM by PAA can serve as active anchoring points for p-rhOPN conjugation and yielded p-rhOPN-BCM. All chemically modified BCMs were characterized by attenuated total reflectance Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy, while their surface morphology was evaluated by field emission-scanning electron microscopy and atomic force microscopy analyses. The amount of p-rhOPN adhered on the membrane was quantified by enzyme-linked immunosorbent assay. The immunocytochemistry, two-stage quantitative real-time reverse transcriptase polymerase chain reaction and in vitro mineralization analyses strongly suggested that p-rhOPN-BCM could elicit biological functions leading to the enhancement of osteogenic differentiation of human periodontal ligament stem cells as effective as BCM conjugated with commercially available rhOPN from mammalian cells (rhOPN-BCM), suggesting its potential to be used as GTR membrane to promote bone tissue regeneration.

Synthesis and Characterization of Cry2Ab-AVM Bioconjugate: Enhanced Affinity to Binding Proteins and Insecticidal Activity

Bacillus thuringiensis insecticidal proteins (Bt toxins) have been widely used in crops for agricultural pest management and to reduce the use of chemical insecticides. Here, we have engineered Bt toxin Cry2Ab30 and bioconjugated it with 4"-O-succinyl avermectin (AVM) to synthesize Cry2Ab-AVM bioconjugate. It was found that Cry2Ab-AVM showed higher insecticidal activity against Plutella xylostella, up to 154.4 times compared to Cry2Ab30. The binding results showed that Cry2Ab-AVM binds to the cadherin-like binding protein fragments, the 10th and 11th cadherin repeat domains in the P. xylostella cadherin (PxCR_10-11), with a much higher affinity (dissociation equilibrium constant K_D = 3.44 nM) than Cry2Ab30 (K_D = 28.7 nM). Molecular docking suggested that the macrolide lactone group of Cry2Ab-AVM ligand docking into the PxCR_10-11 is a potential mechanism to enhance the binding affinity of Cry2Ab-AVM to PxCR_10-11. These findings offer scope for the engineering of Bt toxins by bioconjugation for improved pest management.

Ultrabright dye-loaded spherical polyelectrolyte brushes and their fundamental structure-fluorescence tuning principles

Ultrabright fluorescent particles (UFPs) have attracted increasing attention because of their outstanding signal amplification functions. However, there is still an urgent demand for designing novel UFPs with new components or structures as the existing ones can not satisfy the practical requirements due to their inherent disadvantages. Here we propose a novel ultrabright fluorescent particle platform by doping dyes of 5-aminofluorescein (5-AF) into silica core-based spherical poly (acrylic acid) brushes (SiO₂@PAA@5-AF) and discuss their fundamental structure-fluorescence tuning principles. A series of brushes with different polymer chain lengths are successfully synthesized and then loaded with 5-AF through chemical binding. The high loading amount, suitable density or distribution, and enhanced quantum yield (QY) of 5-AF due to the amide bond formation with PAA chains on brushes are concluded as the three major reasons for the ultrabrightness of SiO₂@PAA@5-AF. Therefore, a 2350 ± 445 times brighter brush particle in comparison to a single quantum dot (QD) is realized, and a 2.1 ± 0.4 times fluorescence improvement of a brush vs. a QD normalized by volume is also achieved when taking the hydrodynamic diameter into consideration (∼300 nm vs. ∼30 nm). Moreover, the excellent tolerance stabilities in normally applied environments and outstanding label effects to form 4-plexed encoded beads are demonstrated as well. The results in this work strongly indicate a promising potential of SiO₂@PAA@5-AF as an ultrabright and stable signal amplification tool for biomedical related sensing, labeling, and biodetection.

A spherical poly(acrylic acid) brush-enzyme block with high catalytic capacity for signal amplification in digital biological assays

Ultrasensitive determination of some ultra-low abundance biological molecules closely related to diseases is currently a wide concern and urgent issue to be addressed. Here, a spherical poly(acrylic acid)-alkaline phosphatase (SP-AKP) signal amplification block using spherical poly(acrylic acid) brush nanoparticles (SP) as the immobilized carriers was designed and synthesized optimally first. The results show that a single SP-AKP with high enzyme binding capacity and high catalytic ability (up to about 4800 effective free AKP per SP-AKP) has much greater fluorescence signal amplification ability than a single free AKP or SiO₂-COOH-AKP. Then, a droplet generation microfluidic chip was prepared successfully, and the SP-AKP was loaded and confined in a 14 pL droplet by adjusting its concentration to ensure at most one SP-AKP was encapsulated in each droplet according to Poisson's theory. Finally, the fluorescence signals produced by 4-methylumbelliferyl phosphate (4-MUP) catalyzed via SP-AKP within 6 min were sufficient to be detected by a fluorescence microscope. Thus, the digital signal distribution of "1/0" (signal/background) was obtained, making this SP-AKP signal amplification block a promising enzyme label for potential high sensitivity digital biological detection applications.

Polymer brush interfaces for protein biosensing prepared by surface-initiated controlled radical polymerization

This article discusses protein-binding polymer brushes and the various strategies that can be used to immobilize proteins on these films.

Biocompatible magnetic nanoparticles grafted by poly(carboxybetaine acrylamide) for enzyme immobilization

Herein, the zwitterionic material poly (carboxybetaine acrylamide) was grafted onto iron oxide to obtain biocompatible magnetic nanoparticles Fe₃O₄-pCBAA which were employed to immobilize enzymes. The nanocomplxes Fe₃O₄-pCBAA were characterized using scanning electron microscopy (SEM), dynamic light scattering (DLS), zeta potential, Fourier transform-infrared (FT-IR) spectra and energy dispersive X-ray spectrometry (EDX). The urease as a model enzyme was immobilized with the novel supports and the properties of immobilized urease were further investigated in comparison with the free urease counterpart. The immobilized urease exhibited excellent thermodynamic and chemical stability. Particularly, 60% of initial activity was remained after being stored at 70 °C for 2 h while the free urease only remained 30%. Besides, the relative activity of immobilized enzyme was 1.7 times that of free ones after disposed in ethanol and 2-propanol for 2 h, and 7 times in DMF. Moreover, immobilized urease retained >80% of its initial activity after 5 cycles. In addition, the immobilization carrier Fe₃O₄-pCBAA displayed famous biocompatibility, and the immobilized urease performed better in complex biological samples, which were >85% and <60% of its initial activity for the immobilized and dissociative urease, respectively, in 20% and 25% of serum. These results confirm that the nanoparticles Fe₃O₄-pCBAA are biofriendly and efficient supports for enzyme immobilization and potential for practical applications in bio-microenvironments.

Plasmonic ELISA Based on Nanospherical Brush-Induced Signal Amplification for the Ultrasensitive Naked-Eye Simultaneous Detection of the Typical Tetrabromobisphenol A Derivative and Byproduct

On the basis of H₂O₂-mediated growth of gold nanoparticle (AuNPs), a novel plasmonic enzyme-linked immunosorbent assay (pELISA) was developed with a polyclonal antibody for the ultrasensitive simultaneous naked-eye detection of tetrabromobisphenol A bis(2-hydroxyetyl) ether (TBBPA DHEE) and tetrabromobisphenol A mono(hydroxyethyl) ether (TBBPA MHEE), one of the major derivatives and byproducts of tetrabromobisphenol A (TBBPA), respectively. In this modified indirect competitive pELISA, glucose oxidase (GOx) played an important role leading to the growth of AuNPs through a reaction between GOx and glucose to produce hydrogen peroxide (H₂O₂). In addition, further signal amplification was achieved via a large number of GOx molecules, which were immobilized on silica nanoparticles carrying poly brushes (SiO₂@PAA) to increase the enzyme load, and the whole complex was conjugated on the second antibody. Under the optimized conditions, 10^-3 μg/L TBBPA DHEE can be distinguished via the observation of a colored solution, and the limit of detection (LOD) of the method using a microplate reader reaches 3.3 × 10^-4 μg/L. In contrast, the sensitivity of the method was 3 orders of magnitude higher than that using conventional colorimetric ELISA with the same antibody. Furthermore, the proposed approach showed good repeatability and reliability after a recovery test fortified with a variety of targets was performed (recoveries, 78.00-102.79%; coefficient of variation (CV), 4.38-9.87%). To our knowledge, this is the first case in which pELISA was applied for the detection of small molecules via the production of H₂O₂ from GOx and glucose. The method will be widely used for the investigation of TBBPA DHEE and TBBPA MHEE in real environments.

Tuning of surface protein adsorption by spherical mixed charged silica brushes (MCB) with zwitterionic carboxybetaine component

Controlled protein adsorption and release without deformation and loss of activity under mild conditions is an essential issue for biological carriers. A spherical mixed charged silica brush (MCB), which could tune protein adsorption, has been prepared by introducing zwitterionic carboxybetaine copolymer onto the surface of silica nanoparticles for the first time. The simple surface-initiated reversible addition-fragmentation chain transfer polymerization (SI-RAFT) was applied to synthesize the MCB precursor - poly(2-(dimethylamino)ethyl methacrylate) modified silica nanoparticles (SiO₂@PDMAEMA). Then, the end group in PDMAEMA was quaternized with propiolactone to obtain poly(DMAEMA-co-carboxybetaine methacrylate) modified silica nanoparticles (SiO₂@poly(DMAEMA-co-CBMA)), which was denoted as MCB. In comparison, fully quaternized MCB (SiO₂@PCBMA) was also prepared by a one-step strategy. Physicochemical behaviours of MCB in solution were systematically studied. The zwitterionic CBMA component endows the MCB with tunable adsorption towards both acidic and basic proteins through simple adjustment of the DMAEMA to CBMA ratio under mild conditions. This study may have great potential applications in the biomedical field, including tunable drug loading and releasing, and immobilized enzymes, etc.

Improved Protein Conjugation with Uniform, Macroporous Poly(acrylamide-co-acrylic acid) Hydrogel Microspheres via EDC/NHS Chemistry

We demonstrate a robust and tunable micromolding method to fabricate chemically functional poly(acrylamide-co-acrylic acid) (p(AAm-co-AA)) hydrogel microspheres with uniform dimensions and controlled porous network structures for rapid biomacromolecular conjugation. Specifically, p(AAm-co-AA) microspheres with abundant carboxylate functional groups are fabricated via surface-tension-induced droplet formation in patterned poly(dimethylsiloxane) molds and photoinduced radical polymerization. To demonstrate the chemical functionality, we enlisted rapid EDC/NHS (1-ethyl-3-(3-(dimethylamino)propyl)carbodiimide (EDC) and N-hydroxysuccinimide (NHS)) chemistry for fluorescent labeling of the microspheres with small-molecule dye fluorescein glycine amide. Epifluorescence imaging results illustrate the uniform incorporation of carboxylate groups within the microspheres and rapid conjugation kinetics. Furthermore, protein conjugation results using red fluorescent protein R-phycoerythrin demonstrate the highly porous nature of the microspheres as well as the utility of the microspheres and the EDC/NHS scheme for facile biomacromolecular conjugation. Combined, these results illustrate the significant potential for our fabrication-conjugation strategy in the development of biofunctionalized polymeric hydrogel microparticles toward rapid biosensing, bioprocess monitoring, and biodiagnostics.

Integrated fabrication-conjugation methods for polymeric and hybrid microparticles for programmable drug delivery and biosensing applications

Functionalized polymeric microparticles possess significant potential for controlled drug delivery and biosensing applications, yet current fabrication techniques face challenges in simple and scalable fabrication and biofunctionalization. For programmable manufacture of biofunctional microparticles in a simple manner, we have developed robust micromolding methods combined with biopolymeric conjugation handles and bioorthogonal click reactions. In this focused minireview, we present detailed methods for our integrated approaches for fabrication of microparticles with controlled 2D and 3D shapes and dimensions toward controlled release, and for biomacromolecular conjugation via strain promoted alkyne-azide cycloaddition (SPAAC) and tetrazine-trans-cyclooctene (Tz-TCO) ligation reactions utilizing a potent aminopolysaccharide chitosan as an efficient conjugation handle. We believe that the fabrication-conjugation methods reported here from a range of our recent reports illustrate the simple, robust and readily reproducible nature of our approaches to creating multifaceted microparticles in a programmable, cost-efficient and scalable manner toward a wide range of medical and biotechnological application areas.

Clickable and Antifouling Platform of Poly[(propargyl methacrylate)-ran-(2-methacryloyloxyethyl phosphorylcholine)] for Biosensing Applications

A functional copolymer platform, namely, poly[(propargyl methacrylate)-ran-(2-methacryloyloxyethyl phosphorylcholine)] (PPgMAMPC), was synthesized by reversible addition-fragmentation chain-transfer polymerization. In principle, the alkyne moiety of propargyl methacrylate (PgMA) should serve as an active site for binding azide-containing molecules via a click reaction, i.e., Cu-catalyzed azide/alkyne cycloaddition (CuAAC), and 2-methacryloyloxyethyl phosphorylcholine (MPC), the hydrophilic monomeric unit, should enable the copolymer to suppress nonspecific adsorption. The copolymers were characterized using Fourier transform infrared (FTIR) and (1)H NMR spectroscopies. Thiol-terminated, PPgMAMPC-SH, obtained by aminolysis of PPgMAMPC, was immobilized on a gold-coated substrate using a "grafting to" approach via self-assembly. Azide-containing species, namely, biotin and peptide nucleic acid (PNA), were then immobilized on the alkyne-containing copolymeric platform via CuAAC. The potential use of surface-attached PPgMAMPC in biosensing applications was shown by detection of specific target molecules, i.e., streptavidin (SA) and DNA, by the developed sensing platform using a surface plasmon resonance technique. The copolymer composition strongly influenced the performance of the developed sensing platform in terms of signal-to-noise ratio in the case of the biotin-SA system and hybridization efficiency and mismatch discrimination for the PNA-DNA system.

Synthesis and Biomedical Applications of Poly((meth)acrylic acid) Brushes

Poly((meth)acrylic acid) (P(M)AA) brushes possess a number of distinctive properties that are particularly attractive for biomedical applications. This minireview summarizes recent advances in the synthesis and biomedical applications of P(M)AA brushes and brushes containing P(M)AA segments. First, we review different surface-initiated polymerization (SIP) methods, with a focus on recent progress in the surface-initiated controlled/living radical polymerization (SI-CLRP) techniques used to generate P(M)AA brushes with a tailored structure. Next, we discuss biomolecule immobilization methods for P(M)AA brushes, including physical adsorption, covalent binding, and affinity interactions. Finally, typical biomedical applications of P(M)AA brushes are reviewed, and their performance is discussed based on their unique properties. We conclude that P(M)AA brushes are promising biomaterials, and more potential biomedical applications are expected to emerge with the further development of synthetic techniques and increased understanding of their interactions with biological systems.

Gold Nanoparticle-Based Facile Detection of Human Serum Albumin and Its Application as an INHIBIT Logic Gate

In this work, a facile colorimetric method is developed for quantitative detection of human serum albumin (HSA) based on the antiaggregation effect of gold nanoparticles (Au NPs) in the presence of HSA. The citrate-capped Au NPs undergo a color change from red to blue when melamine is added as a cross-linker to induce the aggregation of the NPs. Such an aggregation is efficiently suppressed upon the adsorption of HSA on the particle surface. This method provides the advantages of simplicity and cost-efficiency for quantitative detection of HSA with a detection limit of ∼1.4 nM by monitoring the colorimetric changes of the Au NPs with UV-vis spectroscopy. In addition, this approach shows good selectivity for HSA over various amino acids, peptides, and proteins and is qualified for detection of HSA in a biological sample. Such an antiaggregation effect can be further extended to fabricate an INHIBIT logic gate by using HSA and melamine as inputs and the color changes of Au NPs as outputs, which may have application potentials in point-of-care medical diagnosis.

Protein adsorption onto nanomaterials for the development of biosensors and analytical devices: a review

An important consideration for the development of biosensors is the adsorption of the biorecognition element to the surface of a substrate. As the first step in the immobilization process, adsorption affects most immobilization routes and much attention is given into the research of this process to maximize the overall activity of the biosensor. The use of nanomaterials, specifically nanoparticles and nanostructured films, offers advantageous properties that can be fine-tuned to maximize interactions with specific proteins to maximize activity, minimize structural changes, and enhance the catalytic step. In the biosensor field, protein-nanomaterial interactions are an emerging trend that span across many disciplines. This review addresses recent publications about the proteins most frequently used, their most relevant characteristics, and the conditions required to adsorb them to nanomaterials. When relevant and available, subsequent analytical figures of merits are discussed for selected biosensors. The general trend amongst the research papers allows concluding that the use of nanomaterials has already provided significant improvements in the analytical performance of many biosensors and that this research field will continue to grow.

Aggregation of poly(acrylic acid)-containing elastin-mimetic copolymers

Polymer-peptide conjugates were produced via the copper-catalyzed azide-alkyne cycloaddition of poly(tert-butyl acrylate) (PtBA) and elastin-like peptides. An azide-functionalized polymer was produced via atom transfer radical polymerization (ATRP) followed by conversion of bromine end groups to azide groups. Subsequent reaction of the polymer with a bis-alkyne-functionalized, elastin-like peptide proceeded with high efficiency, yielding di- and tri-block conjugates, which after deprotection, yielded poly(acrylic acid) (PAA)-based diblock and triblock copolymers. These conjugates were solubilized in dimethyl formamide, and addition of phosphate buffered saline (PBS) induced aggregation. The presence of polydisperse spherical aggregates was confirmed by dynamic light scattering and transmission electron microscopy. Additionally, a coarse-grained molecular model was designed to reasonably capture inter- and intramolecular interactions for the conjugates and its precursors. This model was used to assess the effect of the different interacting molecular forces on the conformational thermodynamic stability of the copolymers. Our results indicated that the PAA's ability to hydrogen-bond with both itself and the peptide is the main interaction for stabilizing the diblocks and triblocks and driving their self-assembly, while interactions between peptides are suggested to play only a minor role on the conformational and thermodynamic stability of the conjugates.

Horseradish peroxidase-immobilized magnetic mesoporous silica nanoparticles as a potential candidate to eliminate intracellular reactive oxygen species

Horseradish peroxidase-immobilized magnetic mesoporous silica nanoparticles (MMSNs-HRP) have been synthesized by a NHS/EDC coupling between the amino groups of horseradish peroxidase (HRP) and the carboxyl groups on the MMSNs surface. It is found that the immobilized HRP on MMSNs still retain high activity and the MMSNs-HRP can eliminate the reactive oxygen species (ROS) in Chinese hamster ovary (CHO) cells induced by the addition of H2O2 aqueous solution. Further, the fluorescent MMSN-HRP-CD nanoparticles have been prepared by attaching biocompatible, fluorescent carbon dots (CDs) to MMSNs-HRP. We have also investigated the effect of an applied magnetic field on cellular uptake of MMSNs-HRP-CDs and found that the internalization of MMSNs-HRP-CDs by CHO cells could be enhanced within 2 hours under the magnetic field. This work provides us with a novel and efficient method to eliminate ROS in living cells by using HRP-immobilized nanoparticles.

Magnetic beads carrying poly(acrylic acid) brushes as “nanobody containers” for immunoaffinity purification of aflatoxin B1 from corn samples

Magnetic beads with poly(acrylic acid) brushes as “nanobody containers” for aflatoxin B₁ immunoaffinity purification.

Ultrasensitive ELISA using enzyme-loaded nanospherical brushes as labels

Improving the detection sensitivity of enzyme-linked immunosorbent assay (ELISA) is of utmost importance for meeting the demand of early disease diagnosis. Herein we report an ultrasensitive ELISA system using horseradish peroxidase (HRP)-loaded nanospherical poly(acrylic acid) brushes (SPAABs) as labels. HRP was covalently immobilized in SPAABs with high capacity and activity via an efficient "chemical conjugation after electrostatic entrapment" (CCEE) process, thus endowing SPAABs with high amplification capability as labels. The periphery of SPAAB-HRP was further utilized to bind a layer of antibody with high density for efficient capture of analytes owing to the three-dimensional architecture of SPAABs. Using human chorionic gonadotrophin (hCG) as a model analyte, the SPAAB-amplified system drastically boosted the detection limit of ELISA to 0.012 mIU mL(-1), a 267-fold improvement as compared to conventional ELISA systems.