Isotopic exchange plus substrate and inhibition kinetics of D-xylose isomerase do not support a proton-transfer mechanism

Covalent Adduct Formation in Methylthio-d-ribose-1-phosphate Isomerase: Reaction Intermediate or Artifact?

Methylthio-d-ribose-1-phosphate (MTR1P) isomerase (MtnA) functions in the methionine salvage pathway by converting the cyclic aldose MTR1P to its open-chain ketose isomer methylthio-d-ribulose 1-phosphate (MTRu1P). What is particularly challenging for this enzyme is that the substrate's phosphate ester prevents facile equilibration to an aldehyde, which in other aldose-ketose isomerases is known to activate the α-hydrogen for proton or hydride transfer between adjacent carbons. We speculated that MtnA could use covalent catalysis via a phosphorylated residue to permit isomerization by one of the canonical mechanisms, followed by phosphoryl transfer back to form the product. In apparent support of this mechanism, [32P]MTR1P was found by SDS-PAGE and gel-filtration chromatography to radiolabel the enzyme. Susceptibility of this adduct to strongly acidic and basic pH and nucleophilic agents is consistent with an acyl phosphate. C160S and D240N, mutants of two conserved active-site residues, however, exhibited no difference in radiolabeling despite a reduction in activity of ∼107, leading to the conclusion that phosphorylation is unrelated to catalysis. Unexpectedly, prolonged incubations with C160S revealed up to 30% accumulation of radioactivity, which was identified by 31P and 13C NMR to be the result of a second adduct─a hemiketal formed between Ser160 and the carbonyl of MTRu1P. These results are interpreted as indirect support for a mechanism involving transfer of the proton from C-2 to C-1 by Cys160.

Isomerization of Glucose to Fructose in Hydrolysates from Lignocellulosic Biomass Using Hydrotalcite

The isomerization of glucose-containing hydrolysates to fructose is a key step in the process from lignocellulosic biomass to the platform chemical hydroxymethylfurfural. We investigated the isomerization reaction of glucose to fructose in water catalyzed by hydrotalcite. Catalyst characterization was performed via IR, XRD, and SEM. Firstly, glucose solutions at pH-neutral conditions were converted under variation of the temperature, residence time, and catalyst loading, whereby a maximum of 25 wt.% fructose yield was obtained at a 38 wt.% glucose conversion. Secondly, isomerization was performed at pH = 2 using glucose solutions as well as glucose-containing hydrolysates from lignocellulosic biomass. Under acidic conditions, the hydrotalcite loses its activity for isomerization. Consequently, it is unavoidable to neutralize the acidic hydrolysate before the isomerization step with an inexpensive base. As a neutralizing agent NaOH is preferred over Ba(OH)2, since higher fructose yields are achieved with NaOH. Lastly, a pH-neutral hydrolysate from lignocellulose was subjected to isomerization, yielding 16 wt.% fructose at a 32 wt.% glucose conversion. This work targets the application of catalytic systems on real biomass-derived samples.

Mechanistic Studies of the Cu(OH)+ -Catalyzed Isomerization of Glucose into Fructose in Water

The isomerization of glucose to fructose is a crucial interim step in the processing of biomass to renewable fuels and chemicals. This study investigates the copper-catalyzed glucose-fructose isomerization in water, focusing on insights into the roles of the dissolved copper species. Depending on the pH, the thermodynamic equilibrium shifted towards one or a few copper species, namely Cu²⁺ , Cu(OH)⁺ , and Cu(OH)₂ . According to thermodynamics, the highest concentration of Cu(OH)⁺ is at pH 5.3, at which the highest fructose yield of 16 % is achieved. The obtained fructose yields strongly correlate with the concentration of Cu(OH)⁺ . A pH decrease of 2-3 units was observed during the reaction, resulting in the deactivation of the catalyst through hydrolysis in acidic media. Based on the results of the catalytic experiments, as well as spectroscopic and spectrometric studies, we propose Cu(OH)⁺ as an active Lewis-acidic species following an intramolecular 1,2-hydride shift.

Mechanism and stereoselectivity of zeolite-catalysed sugar isomerisation in alcohols

Dinstinction of carbohydrate isotopomers in solution allows mapping the reaction landscape of zeolite-catalysed glucose to fructose isomerisation at great detail.

State of the art of Lewis acid-containing zeolites: lessons from fine chemistry to new biomass transformation processes

The former synthesis of TS-1 opened new catalytic opportunities for zeolites, especially for their application as selective redox catalysts in several fine chemistry processes. Interestingly, isolated Ti species in the framework positions of hydrophobic zeolites, such as high silica zeolites, offer unique Lewis acid sites even in the presence of protic polar solvents (such as water). Following this discovery, other transition metals (such as Sn, Zr, V, Nb, among others) have been introduced in the framework positions of different hydrophobic zeolitic structures, allowing their application in new fine chemistry processes as very active and selective redox catalysts. Recently, these hydrophobic metallozeolites have been successfully applied as efficient catalysts for several biomass-transformation processes in bulk water. The acquired knowledge from the former catalytic descriptions in fine chemistry processes using hydrophobic Lewis acid-containing zeolites has been essential for their application in these novel biomass transformations. In the present review, I will describe the recent advances in the synthesis of new transition metal-containing zeolites presenting Lewis acid character, and their unique catalytic applications in both fine chemistry and novel biomass-transformations.

Engineering acidic Streptomyces rubiginosus D-xylose isomerase by rational enzyme design

To maximize bioethanol production from lignocellulosic biomass, all sugars must be utilized. Yeast fermentation can be improved by introducing the d-xylose isomerase enzyme to convert the pentose sugar d-xylose, which cannot be fermented by Saccharomyces cerevisiae, into the fermentable ketose d-xylulose. The low activity of d-xylose isomerase, especially at the low pH required for optimal fermentation, limits its use. A rational enzyme engineering approach was undertaken, and seven amino acid positions were replaced to improve the activity of Streptomyces rubiginosus d-xylose isomerase towards its physiological substrate at pH values below 6. The active-site design was guided by mechanistic insights and the knowledge of amino acid protonation states at low pH obtained from previous joint X-ray/neutron crystallographic experiments. Tagging the enzyme with 6 or 12 histidine residues at the N-terminus resulted in a significant increase in the active-site affinity towards substrate at pH 5.8. Substituting an asparagine at position 215, which hydrogen bonded to the metal-bound Glu181 and Asp245, with an aspartate gave a variant with almost an order of magnitude lower KM than measured for the native enzyme, with a 4-fold increase in activity. Other studied variants showed similar (Asp57Asn, Glu186Gln/Asn215Asp), lower (Asp57His, Asn247Asp, Lys289His, Lys289Glu) or no (Gln256Asp, Asp287Asn, ΔAsp287) activity in acidic conditions relative to the native enzyme.

Comparison of homogeneous and heterogeneous catalysts for glucose-to-fructose isomerization in aqueous media

Herein, the first comparison of the mechanisms of glucose-to-fructose isomerization in aqueous media enabled by homogeneous (CrCl3 and AlCl3 ) and heterogeneous catalysts (Sn-beta) by using isotopic-labeling studies is reported. A pronounced kinetic isotope effect (KIE) was observed if the deuterium label was at the C2 position, thus suggesting that a hydrogen shift from the C2 to C1 positions was the rate-limiting step with the three catalysts. (13) C and (1) H NMR spectroscopic investigations confirmed that an intra-hydride-transfer reaction pathway was the predominant reaction channel for all three catalysts in aqueous media. Furthermore, the deuterium atom in the labeled glucose could be mapped onto hydroxymethylfurfural and formic acid through reactions that followed the isomerization step in the presence of Brønsted acids. In all three catalysts, the active site appeared to be a bifunctional Lewis-acidic/Brønsted-basic site, based on a speciation model and first-principles calculations. For the first time, a mechanistic similarities between the homogeneous and heterogeneous catalysis of aldose-to-ketose isomerization is established and it is suggested that learning from homogeneous catalysis could assist in the development of improved heterogeneous catalysts.

Inhibition of D-xylose isomerase by polyols: atomic details by joint X-ray/neutron crystallography

D-Xylose isomerase (XI) converts the aldo-sugars xylose and glucose to their keto analogs xylulose and fructose, but is strongly inhibited by the polyols xylitol and sorbitol, especially at acidic pH. In order to understand the atomic details of polyol binding to the XI active site, a 2.0 Å resolution room-temperature joint X-ray/neutron structure of XI in complex with Ni(2+) cofactors and sorbitol inhibitor at pH 5.9 and a room-temperature X-ray structure of XI containing Mg(2+) ions and xylitol at the physiological pH of 7.7 were obtained. The protonation of oxygen O5 of the inhibitor, which was found to be deprotonated and negatively charged in previous structures of XI complexed with linear glucose and xylulose, was directly observed. The Ni(2+) ions occupying the catalytic metal site (M2) were found at two locations, while Mg(2+) in M2 is very mobile and has a high B factor. Under acidic conditions sorbitol gains a water-mediated interaction that connects its O1 hydroxyl to Asp257. This contact is not found in structures at basic pH. The new interaction that is formed may improve the binding of the inhibitor, providing an explanation for the increased affinity of the polyols for XI at low pH.

Metalloenzyme-like catalyzed isomerizations of sugars by Lewis acid zeolites

Isomerization of sugars is used in a variety of industrially relevant processes and in glycolysis. Here, we show that hydrophobic zeolite beta with framework tin or titanium Lewis acid centers isomerizes sugars, e.g., glucose, via reaction pathways that are analogous to those of metalloenzymes. Specifically, experimental and theoretical investigations reveal that glucose partitions into the zeolite in the pyranose form, ring opens to the acyclic form in the presence of the Lewis acid center, isomerizes into the acyclic form of fructose, and finally ring closes to yield the furanose product. The zeolite catalysts provide processing advantages over metalloenzymes such as an ability to work at higher temperatures and in acidic conditions that allow for the isomerization reaction to be coupled with other important conversions.

Binding energy and catalysis by D-xylose isomerase: kinetic, product, and X-ray crystallographic analysis of enzyme-catalyzed isomerization of (R)-glyceraldehyde

D-Xylose isomerase (XI) and triosephosphate isomerase (TIM) catalyze the aldose-ketose isomerization reactions of D-xylose and d-glyceraldehyde 3-phosphate (DGAP), respectively. D-Glyceraldehyde (DGA) is the triose fragment common to the substrates for XI and TIM. The XI-catalyzed isomerization of DGA to give dihydroxyacetone (DHA) in D(2)O was monitored by (1)H nuclear magnetic resonance spectroscopy, and a k(cat)/K(m) of 0.034 M(-1) s(-1) was determined for this isomerization at pD 7.0. This is similar to the k(cat)/K(m) of 0.017 M(-1) s(-1) for the TIM-catalyzed carbon deprotonation reaction of DGA in D(2)O at pD 7.0 [Amyes, T. L., O'Donoghue, A. C., and Richard, J. P. (2001) J. Am. Chem. Soc. 123, 11325-11326]. The much larger activation barrier for XI-catalyzed isomerization of D-xylose (k(cat)/K(m) = 490 M(-1) s(-1)) versus that for the TIM-catalyzed isomerization of DGAP (k(cat)/K(m) = 9.6 × 10(6) M(-1) s(-1)) is due to (i) the barrier to conversion of cyclic d-xylose to the reactive linear sugar (5.4 kcal/mol) being larger than that for conversion of DGAP hydrate to the free aldehyde (1.7 kcal/mol) and (ii) the intrinsic binding energy [Jencks, W. P. (1975) Adv. Enzymol. Relat. Areas Mol. Biol. 43, 219-410] of the terminal ethylene glycol fragment of D-xylose (9.3 kcal/mol) being smaller than that of the phosphodianion group of DGAP (~12 kcal/mol). The XI-catalyzed isomerization of DGA in D(2)O at pD 7.0 gives a 90% yield of [1-(1)H]DHA and a 10% yield of [1-(2)H]DHA, the product of isomerization with incorporation of deuterium from solvent D(2)O. By comparison, the transfer of (3)H from the labeled hexose substrate to solvent is observed only once in every 10(9) turnovers for the XI-catalyzed isomerization of [2-(3)H]glucose in H(2)O [Allen, K. N., Lavie, A., Farber, G. K., Glasfeld, A., Petsko, G. A., and Ringe, D. (1994) Biochemistry 33, 1481-1487]. We propose that truncation of the terminal ethylene glycol fragment of d-xylose to give DGA results in a large decrease in the rate of XI-catalyzed isomerization with hydride transfer compared with that for proton transfer. An ultra-high-resolution (0.97 Å) X-ray crystal structure was determined for the complex obtained by soaking crystals of XI with 50 mM DGA. The triose binds to XI as the unreactive hydrate, but ligand binding induces metal cofactor movement and conformational changes in active site residues similar to those observed for XI·sugar complexes.

Reintroducing electrostatics into macromolecular crystallographic refinement: application to neutron crystallography and DNA hydration

Most current crystallographic structure refinements augment the diffraction data with a priori information consisting of bond, angle, dihedral, planarity restraints, and atomic repulsion based on the Pauli exclusion principle. Yet, electrostatics and van der Waals attraction are physical forces that provide additional a priori information. Here, we assess the inclusion of electrostatics for the force field used for all-atom (including hydrogen) joint neutron/X-ray refinement. Two DNA and a protein crystal structure were refined against joint neutron/X-ray diffraction data sets using force fields without electrostatics or with electrostatics. Hydrogen-bond orientation/geometry favors the inclusion of electrostatics. Refinement of Z-DNA with electrostatics leads to a hypothesis for the entropic stabilization of Z-DNA that may partly explain the thermodynamics of converting the B form of DNA to its Z form. Thus, inclusion of electrostatics assists joint neutron/X-ray refinements, especially for placing and orienting hydrogen atoms.

The reaction mechanism of type I phosphomannose isomerases: new information from inhibition and polarizable molecular mechanics studies

Type I phosphomannose isomerases (PMIs) are zinc-dependent metalloenzymes involved in the reversible isomerization of D-mannose 6-phosphate (M6P) and D-fructose 6-phosphate (F6P). 5-Phospho-D-arabinonohydroxamic acid (5PAH), an inhibitor endowed with nanomolar affinity for yeast (Type I) and Pseudomonas aeruginosa (Type II) PMIs (Roux et al., Biochemistry 2004; 43:2926-2934), strongly inhibits human (Type I) PMI (for which we report an improved expression and purification procedure), as well as Escherichia coli (Type I) PMI. Its K(i) value of 41 nM for human PMI is the lowest value ever reported for an inhibitor of PMI. 5-Phospho-D-arabinonhydrazide, a neutral analogue of the reaction intermediate 1,2-cis-enediol, is about 15 times less efficient at inhibiting both enzymes, in accord with the anionic nature of the postulated high-energy reaction intermediate. Using the polarizable molecular mechanics, sum of interactions between fragments ab initio computed (SIBFA) procedure, computed structures of the complexes between Candida albicans (Type I) PMI and the cyclic substrate β-D-mannopyranose 6-phosphate (β-M6P) and between the enzyme and the high-energy intermediate analogue inhibitor 5PAH are reported. Their analysis allows us to identify clearly the nature of each individual active site amino acid and to formulate a hypothesis for the overall mechanism of the reaction catalyzed by Type I PMIs, that is, the ring-opening and isomerization steps, respectively. Following enzyme-catalyzed ring-opening of β-M6P by zinc-coordinated water and Gln111 ligands, Lys136 is identified as the probable catalytic base involved in proton transfer between the two carbon atoms C1 and C2 of the substrate D-mannose 6-phosphate.

Metal ion roles and the movement of hydrogen during reaction catalyzed by D-xylose isomerase: a joint x-ray and neutron diffraction study

Conversion of aldo to keto sugars by the metalloenzyme D-xylose isomerase (XI) is a multistep reaction that involves hydrogen transfer. We have determined the structure of this enzyme by neutron diffraction in order to locate H atoms (or their isotope D). Two studies are presented, one of XI containing cadmium and cyclic D-glucose (before sugar ring opening has occurred), and the other containing nickel and linear D-glucose (after ring opening has occurred but before isomerization). Previously we reported the neutron structures of ligand-free enzyme and enzyme with bound product. The data show that His54 is doubly protonated on the ring N in all four structures. Lys289 is neutral before ring opening and gains a proton after this; the catalytic metal-bound water is deprotonated to hydroxyl during isomerization and O5 is deprotonated. These results lead to new suggestions as to how changes might take place over the course of the reaction.

The mechanism of the reaction catalyzed by uronate isomerase illustrates how an isomerase may have evolved from a hydrolase within the amidohydrolase superfamily

Uronate isomerase (URI) catalyzes the reversible isomerization of D-glucuronate to D-fructuronate and of D-galacturonate to D-tagaturonate. URI is a member of the amidohydrolase superfamily (AHS), a highly divergent group of enzymes that catalyze primarily hydrolytic reactions. The chemical mechanism and active site structure of URI were investigated in an attempt to improve our understanding of how an active site template that apparently evolved to catalyze hydrolytic reactions has been reforged to catalyze an isomerization reaction. The pH-rate profiles for k(cat) and k(cat)/K(m) for URI from Escherichia coli are bell-shaped and indicate that one group must be unprotonated and another residue must be protonated for catalytic activity. Primary isotope effects on the kinetic constants with [2-2H]-D-glucuronate and the effects of changes in solvent viscosity are consistent with product release being the rate-limiting step. The X-ray structure of Bh0493, a URI from Bacillus halodurans, was determined in the presence of the substrate D-glucuronate. The bound complex showed that the mononuclear metal center in the active site is ligated to the C-6 carboxylate and the C-5 hydroxyl group of the substrate. This hydroxyl group is also hydrogen bonded to Asp-355 in the same orientation as the hydroxide or water is bound in those members of the AHS that catalyze hydrolytic reactions. In addition, the C-2 and C-3 hydroxyl groups of the substrate are hydrogen bonded to Arg-357 and the carbonyl group at C-1 is hydrogen bonded to Tyr-50. A chemical mechanism is proposed that utilizes a proton transfer from C-2 of D-glucuronate to C-1 that is initiated by the combined actions of Asp-355 from the end of beta-strand 8 and the C-5 hydroxyl of the substrate that is bound to the metal ion. The formation of the proposed cis-enediol intermediate is further facilitated by the shuttling of the proton between the C-2 and C-1 oxygens by the conserved Tyr-50 and/or Arg-355.

Overexpression, purification, crystallization and preliminary X-ray crystal analysis of Bacillus pallidusD-arabinose isomerase

D-Arabinose isomerase catalyzes the isomerization of D-arabinose to D-ribulose. Bacillus pallidus D-arabinose isomerase has broad substrate specificity and can catalyze the isomerization of D-arabinose, L-fucose, L-xylose, L-galactose and D-altrose. Recombinant B. pallidus D-arabinose isomerase was overexpressed, purified and crystallized. A crystal of the enzyme was obtained by the sitting-drop method at room temperature and belonged to the orthorhombic space group P2(1)2(1)2, with unit-cell parameters a = 144.9, b = 127.9, c = 109.5 A. Diffraction data were collected to 2.3 A resolution.

Enzymatic characterization of 5-methylthioribose 1-phosphate isomerase from Bacillus subtilis

The product of the mtnA gene of Bacillus subtilis catalyzes the isomerization of 5-methylthioribose 1-phosphate (MTR-1-P) to 5-methylthioribulose 1-phosphate (MTRu-1-P). The catalysis of MtnA is a novel isomerization of an aldose phosphate harboring a phosphate group on the hemiacetal group. This enzyme is distributed widely among bacteria through higher eukaryotes. The isomerase reaction analyzed using the recombinant B. subtilis enzyme showed a Michaelis constant for MTR-1-P of 138 microM, and showed that the maximum velocity of the reaction was 20.4 micromol min(-1) (mg protein)(-1). The optimum reaction temperature and reaction pH were 35 degrees C and 8.1. The activation energy of the reaction was calculated to be 68.7 kJ mol(-1). The enzyme, with a molecular mass of 76 kDa, was composed of two subunits. The equilibrium constant in the reversible isomerase reaction [MTRu-1-P]/[MTR-1-P] was 6. We discuss the possible reaction mechanism.

The structures of L-rhamnose isomerase from Pseudomonas stutzeri in complexes with L-rhamnose and D-allose provide insights into broad substrate specificity

Pseudomonas stutzeri L-rhamnose isomerase (P. stutzeri L-RhI) can efficiently catalyze the isomerization between various aldoses and ketoses, showing a broad substrate specificity compared to L-RhI from Escherichia coli (E. coli L-RhI). To understand the relationship between structure and substrate specificity, the crystal structures of P. stutzeri L-RhI alone and in complexes with L-rhamnose and D-allose which has different configurations of C4 and C5 from L-rhamnose, were determined at a resolution of 2.0 A, 1.97 A, and 1.97 A, respectively. P. stutzeri L-RhI has a large domain with a (beta/alpha)(8) barrel fold and an additional small domain composed of seven alpha-helices, forming a homo tetramer, as found in E. coli L-RhI and D-xylose isomerases (D-XIs) from various microorganisms. The beta1-alpha1 loop (Gly60-Arg76) of P. stutzeri L-RhI is involved in the substrate binding of a neighbouring molecule, as found in D-XIs, while in E. coli L-RhI, the corresponding beta1-alpha1 loop is extended (Asp52-Arg78) and covers the substrate-binding site of the same molecule. The complex structures of P. stutzeri L-RhI with L-rhamnose and D-allose show that both substrates are nicely fitted to the substrate-binding site. The part of the substrate-binding site interacting with the substrate at the 1, 2, and 3 positions is equivalent to E. coli L-RhI, and the other part interacting with the 4, 5, and 6 positions is similar to D-XI. In E. coli L-RhI, the beta1-alpha1 loop creates an unique hydrophobic pocket at the the 4, 5, and 6 positions, leading to the strictly recognition of L-rhamnose as the most suitable substrate, while in P. stutzeri L-RhI, there is no corresponding hydrophobic pocket where Phe66 from a neighbouring molecule merely forms hydrophobic interactions with the substrate, leading to the loose substrate recognition at the 4, 5, and 6 positions.

Uronate isomerase: a nonhydrolytic member of the amidohydrolase superfamily with an ambivalent requirement for a divalent metal ion

Uronate isomerase, a member of the amidohydrolase superfamily, catalyzes the isomerization of D-glucuronate and D-fructuronate. During the interconversion of substrate and product the hydrogen at C2 of D-glucuronate is transferred to the pro-R position at C1 of the product, D-fructuronate. The exchange of the transferred hydrogen with solvent deuterium occurs at a rate that is 4 orders of magnitude slower than the interconversion of substrate and product. The enzyme catalyzes the elimination of fluoride from 3-deoxy-3-fluoro-D-glucuronate. These results have been interpreted to suggest a chemical reaction mechanism in which an active site base abstracts the proton from C2 of D-glucuronate to form a cis-enediol intermediate. The conjugate acid then transfers this proton to C1 of the cis-enediol intermediate to form D-fructuronate. The loss of fluoride from 3-deoxy-3-fluoro-D-glucuronate is consistent with a stabilized carbanion at C2 of the substrate during substrate turnover. The slow exchange of the transferred hydrogen with solvent water is consistent with a shielded conjugate acid after abstraction of the proton from either D-glucuronate or D-fructuronate during the isomerization reaction. This conclusion is supported by the competitive inhibition of the enzymatic reaction by D-arabinaric acid and the monohydroxamate derivative with Ki values of 13 and 670 nM, respectively. There is no evidence to support a hydride transfer mechanism for uronate isomerase. The wild type enzyme was found to contain 1 equiv of zinc per subunit. The divalent cation could be removed by dialysis against the metal chelator, dipicolinate. However, the apoenzyme has the same catalytic activity as the Zn-substituted enzyme and thus the divalent metal ion is not required for enzymatic activity. This is the only documented example of a member in the amidohydrolase superfamily that does not require one or two divalent cations for enzymatic activity.

Crystal Structure of Escherichia coli L-Arabinose Isomerase (ECAI), The Putative Target of Biological Tagatose Production

Escherichia coli L-arabinose isomerase (ECAI; EC 5.3.1.4) catalyzes the isomerization of L-arabinose to L-ribulose in vivo. This enzyme is also of commercial interest as it catalyzes the conversion of D-galactose to D-tagatose in vitro. The crystal structure of ECAI was solved and refined at 2.6 A resolution. The subunit structure of ECAI is organised into three domains: an N-terminal, a central and a C-terminal domain. It forms a crystallographic trimeric architecture in the asymmetric unit. Packing within the crystal suggests the idea that ECAI can form a hexameric assembly. Previous electron microscopic and biochemical studies supports that ECAI is hexameric in solution. A comparison with other known structures reveals that ECAI adopts a protein fold most similar to E. coli fucose isomerase (ECFI) despite very low sequence identity 9.7%. The structural similarity between ECAI and ECFI with regard to number of domains, overall fold, biological assembly, and active site architecture strongly suggests that the enzymes have functional similarities. Further, the crystal structure of ECAI forms a basis for identifying molecular determinants responsible for isomerization of arabinose to ribulose in vivo and galactose to tagatose in vitro.

A quasi-Laue neutron crystallographic study of d-xylose isomerase

The location of hydrogen atoms in enzyme structures can bring critical understanding of catalytic mechanism. However, whilst it is often difficult to determine the position of hydrogen atoms using X-ray crystallography even with subatomic (<1.0 A) resolution data available, neutron crystallography provides an experimental tool to directly localize hydrogen/deuterium atoms in biological macromolecules at resolution of 1.5-2.0 A. D-Xylose isomerase (D-xylose ketol-isomerase, EC 5.3.1.5) is a 43 kDa enzyme that catalyses the first reaction in the catabolism of D-xylose. Linearization and isomerization of D-xylose at the active site of D-xylose isomerase rely upon a complex hydrogen transfer. Neutron quasi-Laue data at 2.2 A resolution were collected at room temperature on a partially deuterated Streptomyces rubiginosus D-xylose isomerase crystal using the LADI instrument at ILL with the objective to provide insight into the enzymatic mechanism. The neutron structure shows unambiguously that residue His 53 is doubly protonated at the active site of the enzyme. This suggests that the reaction proceeds through an acid catalyzed opening of the sugar ring, which is in accord with the mechanism suggested by Fenn et al. (Biochemistry 43(21): 6464-6474, 2004). This is the first report of direct observation of double protonation of His 53 and the first validation of the ring opening mechanism at the active site of D-xylose isomerase.

Sensitivity of molecular dynamics simulations to the choice of the X-ray structure used to model an enzymatic reaction

A subject of great practical importance that has not received much attention is the question of the sensitivity of molecular dynamics simulations to the initial X-ray structure used to set up the calculation. We have found two cases in which seemingly similar structures lead to quite different results, and in this article we present a detailed analysis of these cases. The first case is acyl-CoA dehydrogenase, and the chief difference of the two structures is attributed to a slight shift in a backbone carbonyl that causes a key residue (the proton-abstracting base) to be in a bad conformation for reaction. The second case is xylose isomerase, and the chief difference of the two structures appears to be the ligand sphere of a Mg2+ metal cofactor that plays an active role in catalysis.

A spectrophotometric assay of D-glucuronate based on Escherichia coli uronate isomerase and mannonate dehydrogenase

Escherichia coli uronate isomerase and mannonate dehydrogenase were overexpressed in E. coli BL21(DE3)pLysS cells and purified to near-homogeneity. The kinetic properties of the two enzymes were investigated. The isomerase was found to be inhibited by EDTA and to be stimulated by Zn(2+), Co(2+), and Mn(2+), but not by Mg(2+) or Ca(2+). Both enzymes were used to develop a sensitive spectrophotometric assay, in which D-glucuronate is converted to D-mannonate with concomitant oxidation of NADH to NAD(+). The sensitivity of this assay permits the detection of less than 1 nmol D-glucuronate. This assay can also be used to determine the concentration of beta-glucuronides and glucuronate 1-phosphate after enzymatic hydrolysis of these compounds with beta-glucuronidase or alkaline phosphatase.

Distinct metal dependence for catalytic and structural functions in the L-arabinose isomerases from the mesophilic Bacillus halodurans and the thermophilic Geobacillus stearothermophilus

L-Arabinose isomerase (AI) catalyzes the isomerization of L-arabinose to L-ribulose. It can also convert d-galactose to d-tagatose at elevated temperatures in the presence of divalent metal ions. The araA genes, encoding AI, from the mesophilic bacterium Bacillus halodurans and the thermophilic Geobacillus stearothermophilus were cloned and overexpressed in Escherichia coli, and the recombinant enzymes were purified to homogeneity. The purified enzymes are homotetramers with a molecular mass of 232 kDa and close amino acid sequence identity (67%). However, they exhibit quite different temperature dependence and metal requirements. B. halodurans AI has maximal activity at 50 degrees C under the assay conditions used and is not dependent on divalent metal ions. Its apparent K(m) values are 36 mM for L-arabinose and 167 mM for d-galactose, and the catalytic efficiencies (k(cat)/K(m)) of the enzyme were 51.4 mM(-1)min(-1) (L-arabinose) and 0.4 mM(-1)min(-1) (d-galactose). Unlike B. halodurans AI, G. stearothermophilus AI has maximal activity at 65-70 degrees C, and is strongly activated by Mn(2+). It also has a much higher catalytic efficiency of 4.3 mM(-1)min(-1) for d-galactose and 32.5 mM(-1)min(-1)for L-arabinose, with apparent K(m) values of 117 and 63 mM, respectively. Irreversible thermal denaturation experiments using circular dichroism (CD) spectroscopy showed that the apparent melting temperature of B. halodurans AI (T(m)=65-67 degrees C) was unaffected by the presence of metal ions, whereas EDTA-treated G. stearothermophilus AI had a lower T(m) (72 degrees C) than the holoenzyme (78 degrees C). CD studies of both enzymes demonstrated that metal-mediated significant conformational changes were found in holo G. stearothermophilus AI, and there is an active tertiary structure for G. stearothermophilus AI at elevated temperatures for its catalytic activity. This is in marked contrast to the mesophilic B. halodurans AI where cofactor coordination is not necessary for proper protein folding. The metal dependence of G. stearothermophilus AI seems to be correlated with their catalytic and structural functions. We therefore propose that the metal ion requirement of the thermophilic G. stearothermophilus AI reflects the need to adopt the correct substrate-binding conformation and the structural stability at elevated temperatures.

Quantum dynamics of hydride transfer catalyzed by bimetallic electrophilic catalysis: synchronous motion of Mg(2+) and H(-) in xylose isomerase

Xylose isomerase exhibits a bridged-bimetallic active-site motif in which the substrate is bound to two metals connected by a glutamate bridge, and X-ray crystallographic studies suggest that metal movement is involved in the hydride transfer rate-controlling catalytic step. Here we report classical/quantal dynamical simulations of this step that provide new insight into the metal motion. The potential energy surface is calculated by treating xylose with semiempirical molecular orbital theory augmented by a simple valence bond potential and the rest of the system by molecular mechanics. The rate constant for the hydride-transfer step was calculated by ensemble-averaged dynamical simulations including both variational transition-state theory for determination of the statistically averaged dynamical bottleneck and optimized multidimensional tunneling calculations. The dynamics calculations include 25 317 atoms, with quantized vibrational free energy in 89 active-site degrees of freedom, and with 32 atoms moving through static secondary zone transition-state configurations in the quantum tunneling simulation. Our simulations show that the average Mg-Mg distance R increases monotonically as a function of the hydride-transfer progress variable z. The range of the average R along the reaction path is consistent with the X-ray structure, thus providing a dynamical demonstration of the postulated role of Mg in catalysis. We also predicted the primary deuterium kinetic isotope effect (KIE) for the chemical step. We calculated a KIE of 3.8 for xylose at 298 K, which is consistent with somewhat smaller experimentally observed KIEs for glucose substrate at higher temperatures. More than half of our KIE is due to tunneling; neglecting quantum effects on the reaction coordinate reduces the calculated KIE to 1.8.

The crystal structure of rabbit phosphoglucose isomerase complexed with 5-phospho-D-arabinonohydroxamic acid

Phosphoglucose isomerase (EC ) catalyzes the second step in glycolysis, the reversible isomerization of D-glucose 6-phosphate to D-fructose 6-phosphate. The reaction mechanism involves acid-base catalysis with proton transfer and proceeds through a cis-enediol(ate) intermediate. 5-Phospho-D-arabinonohydroxamic acid (5PAH) is a synthetic small molecule that resembles the reaction intermediate, differing only in that it has a nitrogen atom in place of C1. Hence, 5PAH is the best inhibitor of the isomerization reaction reported to date with a K(i) of 2 x 10(-7) M. Here we report the crystal structure of rabbit phosphoglucose isomerase complexed with 5PAH at 1.9 A resolution. The interaction of 5PAH with amino acid residues in the enzyme active site supports a model of the catalytic mechanism in which Glu-357 transfers a proton between C1 and C2 and Arg-272 helps stabilize the intermediate. It also suggests a mechanism for proton transfer between O1 and O2.

Copper-based bioinspired oxygenation and glyoxalase-like reactivity

Re-engineered, structurally abbreviated models of metalloenzymes may extend their biomimetic functionality to bioinspired reactivity. The oxygenation of external substrates, in particular, remains an important objective of biomimetic and bioinspired catalysis. We report that the reaction of [(Cu(I)TpCF3,CH3)2] with excess acetone in air produces [CuTpCF3,CH3)(lactate)] in over 95% yield at ambient conditions, without any noticeable ligand decomposition. This chemically unprecedented one-pot conversion of acetone to lactate occurs as a multistep process in the gluconeogenic pathway catalyzed by P450 isozyme 3a and Ni- or Zn-based glyoxalases. On the basis of the structure of the [CuTpCF3,CH3)(lactate)] product and oxygenation experiments using isotopically labeled acetone and water, an inner-sphere oxidation/isomerization mechanism is proposed.

Isolation and characterization of a xylose-glucose isomerase from a new strain Streptomyces thermovulgaris 127, var. 7-86

A thermostable D-xylose–glucose isomerase was isolated from the thermophilic strain Streptomyces thermovulgaris 127, var. 7-86, as a result of mutagenic treatment by γ-irradiation of the parent strain, by precipitation and sequential chromatographies on DEAE–Sephadex A50, TSK-gel, FPLC-Mono Q/HR, and Superose 12™ columns. The N-terminal amino acid sequence and amino acid analysis shows 73–92% homology with xylose–glucose isomerases from other sources. The native molecular mass, determined by gel filtration on a Superose 12™ column, is 180 kDa, and 44.6 and 45 kDa were calculated, based on amino acid analysis and 10% SDS-PAGE, respectively. Both, the activity and stability of the enzyme were investigated toward pH, temperature, and denaturation with guanidine hydrochloride. The enzyme activity showed a clear pH optimum between pH 7.2 and 9.0 with D-glucose and 7.4 and 8.3 with D-xylose as substrates, respectively. The enzyme is active up to 60–85°C at pH 7.0, using D-glucose, and up to 50–60°C at pH 7.6, using D-xylose as substrates. The activation energy (Ea = 46 kJ·mol–1) and the critical temperature (Tc = 60°C) were determined by fluorescence spectroscopy. Tc is in close coincidence with the melting temperature of denaturation (Tm = 59°C), determined by circular dichroism (CD) spectroscopy. The free energy of stabilization in water after denaturation with Gdn.HCl was calculated to be 12 kJ·mol–1. The specific activity (km values) for D-xylose-glucose isomerase at 70°C toward different substrates, D-xylose, D-glucose, and D-ribose, were determined to be 4.4, 55.5, and 13.3 mM, recpectively.Key words: D-xylose-glucose isomerase, protein sequencing, protein stability, protein denaturation.

Brief History of Glyoxalase I and What We Have Learned about Metal Ion-Dependent, Enzyme-Catalyzed Isomerizations

Glyoxalase I, a member of the metalloglutathione (GSH) transferase superfamily, plays a critical detoxification role in cells by catalyzing the conversion of cytotoxic methylglyoxal (as the diastereomeric GSH-thiohemiacetals) to S-D-lactoylglutathione via a 1,2-hydrogen transfer. The mechanism-of-action of this Zn2+-metalloenzyme has been the subject of considerable controversy over the past 50 years. Key issues relate to the role of the active-site metal ion in catalysis and how the enzyme is able to use directly both diastereomeric thiohemiacetals as substrates. The results of recent X-ray crystallographic measurements on the enzyme in complex with a transition state analogue and site-directed mutagenesis studies now strongly support a base-mediated, proton-transfer mechanism in which the bound diastereomeric substrates undergo catalytic interconversion before the 1S-diastereomer goes to product via a Zn2+-coordinated, cis-enediolate intermediate. Comparisons with chemical model systems suggest that Zn2+-coordination of thiohemiacetal substrate will dramatically increase the thermodynamic and kinetic acidity of the C1-H bond of substrate. In the human enzyme, the carboxyl group of Glu (172) is well positioned to catalyze a suprafacial proton transfer between the adjacent carbons of substrate. The Zn2+-coordinated carboxyl group of Glu(99) is a reasonable candidate to catalyze proton transfer between the Zn2+-coordinated oxygen atoms of the enediolate intermediate. Other Zn2+ metalloenzymes appear to use similar reaction mechanisms to facilitate proton transfers.

Glucose isomerase: insights into protein engineering for increased thermostability

Thermostable glucose isomerases are desirable for production of 55% fructose syrups at >90 degrees C. Current commercial enzymes operate only at 60 degrees C to produce 45% fructose syrups. Protein engineering to construct more stable enzymes has so far been relatively unsuccessful, so this review focuses on elucidation of the thermal inactivation pathway as a future guide. The primary and tertiary structures of 11 Class 1 and 20 Class 2 enzymes are compared. Within each class the structures are almost identical and sequence differences are few. Structural differences between Class 1 and Class 2 are less than previously surmised. The thermostabilities of Class 1 enzymes are essentially identical, in contrast to previous reports, but in Class 2 they vary widely. In each class, thermal inactivation proceeds via the tetrameric apoenzyme, so metal ion affinity dominates thermostability. In Class 1 enzymes, subunit dissociation is not involved, but there is an irreversible conformational change in the apoenzyme leading to a more thermostable inactive tetramer. This may be linked to reversible conformational changes in the apoenzyme at alkaline pH arising from electrostatic repulsions in the active site, which break a buried Arg-30-Asp-299 salt bridge and bring Arg-30 to the surface. There is a different salt bridge in Class 2 enzymes, which might explain their varying thermostability. Previous protein engineering results are reviewed in light of these insights.

The structure of rhamnose isomerase from Escherichia coli and its relation with xylose isomerase illustrates a change between inter and intra-subunit complementation during evolution

Using a new expression construct, rhamnose isomerase from Escherichia coli was purified and crystallized. The crystal structure was solved by multiple isomorphous replacement and refined to a crystallographic residual of 17.4 % at 1.6 A resolution. Rhamnose isomerase is a tight tetramer of four (beta/alpha)(8)-barrels. A comparison with other known structures reveals that rhamnose isomerase is most similar to xylose isomerase. Alignment of the sequences of the two enzymes based on their structures reveals a hitherto undetected sequence identity of 13 %, suggesting that the two enzymes evolved from a common precursor. The structure and arrangement of the (beta/alpha)(8)-barrels of rhamnose isomerase are very similar to xylose isomerase. Each enzyme does, however, have additional alpha-helical domains, which are involved in tetramer association, and largely differ in structure. The structures of complexes of rhamnose isomerase with the inhibitor l-rhamnitol and the natural substrate l-rhamnose were determined and suggest that an extended loop, which is disordered in the native enzyme, becomes ordered on substrate binding, and may exclude bulk solvent during catalysis. Unlike xylose isomerase, this loop does not extend across a subunit interface but contributes to the active site of its own subunit. It illustrates how an interconversion between inter and intra-subunit complementation can occur during evolution. In the crystal structure (although not necessarily in vivo) rhamnose isomerase appears to bind Zn(2+) at a "structural" site. In the presence of substrate the enzyme also binds Mn(2+) at a nearby "catalytic" site. An array of hydrophobic residues, not present in xylose isomerase, is likely to be responsible for the recognition of l-rhamnose as a substrate. The available structural data suggest that a metal-mediated hydride-shift mechanism, which is generally favored for xylose isomerase, is also feasible for rhamnose isomerase.

Structure and mechanism of L-fucose isomerase from Escherichia coli

The three-dimensional structure of L-fucose isomerase from Escherichia coli has been determined by X-ray crystallography at 2.5 A resolution. This ketol isomerase converts the aldose L-fucose into the corresponding ketose L-fuculose using Mn2+ as a cofactor. Being a hexamer with 64,976 Da per subunit, L-fucose isomerase is the largest structurally known ketol isomerase. The enzyme shows neither sequence nor structural similarity with other ketol isomerases. The hexamer obeys D3 symmetry and forms the crystallographic asymmetric unit. The strict and favorably oriented local symmetry allowed for a computational phase extension from 7.3 A to 2.5 A resolution. The structure was solved with an L-fucitol molecule bound to the catalytic center such that the hydroxyl groups at positions 1 and 2 are ligands of the manganese ion. Most likely, L-fucitol mimics a bound L-fucose molecule in its open chain form. The protein environment suggests strongly that the reaction belongs to the ene-diol type.

Role of electrostatics at the catalytic metal binding site in xylose isomerase action: Ca(2+)-inhibition and metal competence in the double mutant D254E/D256E

The catalytic metal binding site of xylose isomerase from Arthrobacter B3728 was modified by protein engineering to diminish the inhibitory effect of Ca2+ and to study the competence of metals on catalysis. To exclude Ca2+ from Site 2 a double mutant D254E/D256E was designed with reduced space available for binding. In order to elucidate structural consequences of the mutation the binary complex of the mutant with Mg2+ as well as ternary complexes with bivalent metal ions and the open-chain inhibitor xylitol were crystallized for x-ray studies. We determined the crystal structures of the ternary complexes containing Mg2+, Mn2+, and Ca2+ at 2.2 to 2.5 A resolutions, and refined them to R factors of 16.3, 16.6, and 19.1, respectively. We found that all metals are liganded by both engineered glutamates as well as by atoms O1 and O2 of the inhibitor. The similarity of the coordination of Ca2+ to that of the cofactors as well as results with Be2+ weaken the assumption that geometry differences should account for the catalytic noncompetence of this ion. Kinetic results of the D254E/D256E mutant enzyme showed that the significant decrease in Ca2+ inhibition was accompanied by a similar reduction in the enzymatic activity. Qualitative argumentation, based on the protein electrostatic potential, indicates that the proximity of the negative side chains to the substrate significantly reduces the electrostatic stabilization of the transition state. Furthermore, due to the smaller size of the catalytic metal site, no water molecule, coordinating the metal, could be observed in ternary complexes of the double mutant. Consequently, the proton shuttle step in the overall mechanism should differ from that in the wild type. These effects can account for the observed decrease in catalytic efficiency of the D254E/D256E mutant enzyme.

Exploring the interaction between D-xylose isomerase and D-xylose by free energy calculation

The numerical quadrature thermodynamic integration method is used to investigate enzyme-substrate interaction of D-xylose isomerase. A screening function for the coulombic interaction is introduced into the simulation to correct the effect of finite cut-off radius for the non-bonded interaction. The binding free energy difference for D-xylose with D-xylose isomerase and its N184D mutant has been calculated, and the result 3.9 +/- 1.2 kJ/mol agrees well with experimental data of 4.38 kJ/mol. In addition, the structure and dynamics of enzyme-substrate complex were simulated for mutant and wild-type enzyme, respectively. Analysis of the structures and intramolecular interactions of the complexes were found to be valuable for understanding the reaction mechanism of the enzyme D-xylose isomerase.

Molecular and industrial aspects of glucose isomerase

Glucose isomerase (GI) (D-xylose ketol-isomerase; EC. 5.3.1.5) catalyzes the reversible isomerization of D-glucose and D-xylose to D-fructose and D-xylulose, respectively. The enzyme has the largest market in the food industry because of its application in the production of high-fructose corn syrup (HFCS). HFCS, an equilibrium mixture of glucose and fructose, is 1.3 times sweeter than sucrose and serves as a sweetener for use by diabetics. Interconversion of xylose to xylulose by GI serves a nutritional requirement in saprophytic bacteria and has a potential application in the bioconversion of hemicellulose to ethanol. The enzyme is widely distributed in prokaryotes. Intensive research efforts are directed toward improving its suitability for industrial application. Development of microbial strains capable of utilizing xylan-containing raw materials for growth or screening for constitutive mutants of GI is expected to lead to discontinuation of the use of xylose as an inducer for the production of the enzyme. Elimination of Co2+ from the fermentation medium is desirable for avoiding health problems arising from human consumption of HFCS. Immobilization of GI provides an efficient means for its easy recovery and reuse and lowers the cost of its use. X-ray crystallographic and genetic engineering studies support a hydride shift mechanism for the action of GI. Cloning of GI in homologous as well as heterologous hosts has been carried out, with the prime aim of overproducing the enzyme and deciphering the genetic organization of individual genes (xylA, xylB, and xylR) in the xyl operon of different microorganisms. The organization of xylA and xylB seems to be highly conserved in all bacteria. The two genes are transcribed from the same strand in Escherichia coli and Bacillus and Lactobacillus species, whereas they are transcribed divergently on different strands in Streptomyces species. A comparison of the xylA sequences from several bacterial sources revealed the presence of two signature sequences, VXW(GP)GREG(YSTAE)E and (LIVM)EPKPX(EQ)P. The use of an inexpensive inducer in the fermentation medium devoid of Co2+ and redesigning of a tailor-made GI with increased thermostability, higher affinity for glucose, and lower pH optimum will contribute significantly to the development of an economically feasible commercial process for enzymatic isomerization of glucose to fructose. Manipulation of the GI gene by site-directed mutagenesis holds promise that a GI suitable for biotechnological applications will be produced in the foreseeable future.

Protein purification, and cloning and characterization of the cDNA and gene for xylose isomerase of barley

The first eukaryotic xylose isomerase protein was purified from barley Hordeum vulgare. The enzyme requires Mn2+ for its activity and is fairly thermostable, with the optimum temperature being 60 degrees C. It showed maximum activity over a broad pH range (7.0-9.0). The molecular mass of the monomer was about 50,000 Da based on the SDS/PAGE, and the calculated value from the cDNA-deduced polypeptide sequence was 53,620 Da. A relative mass estimation of 100,000 Da was obtained from the Superose 12 chromatography, suggesting that the barley enzyme is a dimer. The cloned corresponding cDNA sequence of 1710 nucleotides encoded a polypeptide of 480 amino acids. The genomic sequence of 4473 nucleotides, revealed that the isomerase gene contained 20 introns, all starting with GT and ending with AG. One large intron was located in the 5'untranslated region. The barley isomerase has an insertion of about 40 residues at its amino terminus when compared to the prokaryotic cluster (family) II isomerases; cluster (family) I and cluster (family) II isomerases vary from the former in an insertion of around 50 residues at their amino termini. Comparison of the barley protein with the prokaryotic isomerases shows that the conserved catalytic and metal binding regions are also well conserved in barley.

Structure and catalytic mechanism of glucosamine 6-phosphate deaminase from Escherichia coli at 2.1 A resolution

BACKGROUND

Glucosamine 6-phosphate deaminase from Escherichia coli is an allosteric hexameric enzyme which catalyzes the reversible conversion of D-glucosamine 6-phosphate into D-fructose 6-phosphate and ammonium ion and is activated by N-acetyl-D-glucosamine 6-phosphate. Mechanistically, it belongs to the group of aldoseketose isomerases, but its reaction also accomplishes a simultaneous amination/deamination. The determination of the structure of this protein provides fundamental knowledge for understanding its mode of action and the nature of allosteric conformational changes that regulate its function.

RESULTS

The crystal structure of glucosamine 6-phosphate deaminase with bound phosphate ions is presented at 2.1 A resolution together with the refined structures of the enzyme in complexes with its allosteric activator and with a competitive inhibitor. The protein fold can be described as a modified NAD-binding domain.

CONCLUSIONS

From the similarities between the three presented structures, it is concluded that these represent the enzymatically active R state conformer. A mechanism for the deaminase reaction is proposed. It comprises steps to open the pyranose ring of the substrate and a sequence of general base-catalyzed reactions to bring about isomerization and deamination, with Asp72 playing a key role as a proton exchanger.

Probing the roles of active site residues in D-xylose isomerase

The roles of active site residues His54, Phe94, Lys183, and His220 in the Streptomyces rubiginosus D-xylose isomerase were probed by site-directed mutagenesis. The kinetic properties and crystal structures of the mutant enzymes were characterized. The pH dependence of diethylpyrocarbonate modification of His54 suggests that His54 does not catalyze ring-opening as a general acid. His54 appears to be involved in anomeric selection and stabilization of the acyclic transition state by hydrogen bonding. Phe94 stabilizes the acyclic-extended transition state directly by hydrophobic interactions and/or indirectly by interactions with Trp137 and Phe26. Lys183 and His220 mutants have little or no activity and the structures of these mutants with D-xylose reveal cyclic alpha-D-xylopyranose. Lys183 functions structurally by maintaining the position of Pro187 and Glu186 and catalytically by interacting with acyclic-extended sugars. His220 provides structure for the M2-metal binding site with properties which are necessary for extension and isomerization of the substrate. A second M2 metal binding site (M2') is observed at a relatively lower occupancy when substrate is added consistent with the hypothesis that the metal moves as the hydride is shifted on the extended substrate.

xylA cloning and sequencing and biochemical characterization of xylose isomerase from Thermotoga neapolitana

The xylA gene coding for xylose isomerase from the hyperthermophile Thermotoga neapolitana 5068 was cloned, sequenced, and expressed in Escherichia coli. The gene encoded a polypeptide of 444 residues with a calculated molecular weight of 50,892. The native enzyme was a homotetramer with a molecular weight of 200,000. This xylose isomerase was a member of the family II enzymes (these differ from family I isomerases by the presence of approximately 50 additional residues at the amino terminus). The enzyme was extremely thermostable, with optimal activity above 95 degrees C. The xylose isomerase showed maximum activity at pH 7.1, but it had high relative activity over a broad pH range. The catalytic efficiency (kcat/Km) of the enzyme was essentially constant between 60 and 90 degrees C, and the catalytic efficiency decreased between 90 and 98 degrees C primarily because of a large increase in Km. The T. neapolitana xylose isomerase had a higher turnover number and a lower Km for glucose than other family II xylose isomerases. Comparisons with other xylose isomerases showed that the catalytic and cation binding regions were well conserved. Comparison of different xylose isomerase sequences showed that numbers of asparagine and glutamine residues decreased with increasing enzyme thermostability, presumably as a thermophilic strategy for diminishing the potential for chemical denaturation through deamidation at elevated temperatures.

X-ray crystallographic structures of D-xylose isomerase-substrate complexes position the substrate and provide evidence for metal movement during catalysis

The X-ray crystallographic structures of the metal-activated enzyme xylose isomerase from Streptomyces olivochromogenes with the substrates D-glucose, 3-O-methyl-D-glucose and in the absence of substrate were determined to 1.96-, 2.19-, and 1.81-A resolution and refined to R-factors of 16.6%, 15.9%, and 16.1%, respectively. Xylose isomerase catalyzes the interconversion between glucose and fructose (xylose and xylulose under physiological conditions) by utilizing two metal cofactors to promote a hydride shift; the metals are bridged by a glutamate residue. This puts xylose isomerase in the small but rapidly growing family of enzymes with a bridged bimetallic active site, in which both metals are involved in the chemical transformation. The substrate 3-O-methylglucose was chosen in order to position the glucose molecule in the observed electron density unambiguously. Of the two essential magnesium ions per active site, Mg-2 was observed to occupy two alternate positions, separated by 1.8 A, in the substrate-soaked structures. The deduced movement was not observed in the structure without substrate present and is attributed to a step following substrate binding but prior to isomerization. The substrates glucose and 3-O-methylglucose are observed in their linear extended forms and make identical interactions with the enzyme by forming ligands to Mg-1 through O2 and O4 and by forming hydrogen bonds with His53 through O5 and Lys182 through O1. Mg-2 has a water ligand that is interpreted in the crystal structure in the absence of substrate as a hydroxide ion and in the presence of substrate as a water molecule. This hydroxide ion may act as a base to deprotonate the glucose O2 and subsequently protonate the product fructose O1 concomitant with hydride transfer. Calculations of the solvent-accessible surface of possible dimers, with and without the alpha-helical C-terminal domain, suggest that the tetramer is the active form of this xylose isomerase.