Effects of detergent environments on the photocycle of purified monomeric bacteriorhodopsin

Archaeal Lipids Regulating the Trimeric Structure Dynamics of Bacteriorhodopsin for Efficient Proton Release and Uptake

S-TGA-1 and PGP-Me are native archaeal lipids associated with the bacteriorhodopsin (bR) trimer and contribute to protein stabilization and native dynamics for proton transfer. However, little is known about the underlying molecular mechanism of how these lipids regulate bR trimerization and efficient photocycling. Here, we explored the specific binding of S-TGA-1 and PGP-Me with the bR trimer and elucidated how specific interactions modulate the bR trimeric structure and proton release and uptake using long-term atomistic molecular dynamic simulations. Our results showed that S-TGA-1 and PGP-Me are essential for stabilizing the bR trimer and maintaining the coherent conformational dynamics necessary for proton transfer. The specific binding of S-TGA-1 with W80 and K129 regulates proton release on the extracellular surface by forming a “Glu-shared” model. The interaction of PGP-Me with K40 ensures proton uptake by accommodating the conformation of the helices to recruit enough water molecules on the cytoplasmic side. The present study results could fill in the theoretical gaps of studies on the functional role of archaeal lipids and could provide a reference for other membrane proteins containing similar archaeal lipids.

Roles of functional lipids in bacteriorhodopsin photocycle in various delipidated purple membranes

Purple membrane (PM) is composed of several native lipids and the transmembrane protein bacteriorhodopsin (bR) in trimeric configuration. The delipidated PM (dPM) samples can be prepared by treating PM with CHAPS (3-[(3-cholamidopropyl)dimethylammonio]-1-propanesulfonate) to partially remove native lipids while maintaining bR in the trimeric configuration. By correlating the photocycle kinetics of bR and the exact lipid compositions of the various dPM samples, one can reveal the roles of native PM lipids. However, it is challenging to compare the lipid compositions of the various dPM samples quantitatively. Here, we utilized the absorbances of extracted retinal at 382 nm to normalize the concentrations of the remaining lipids in each dPM sample, which were then quantified by mass spectrometry, allowing us to compare the lipid compositions of different samples in a quantitative manner. The corresponding photocycle kinetics of bR were probed by transient difference absorption spectroscopy. We found that the removal rate of the polar lipids follows the order of BPG ≈ GlyC < S-TGD-1 ≈ PG < PGP-Me ≈ PGS. Since BPG and GlyC have more nonpolar phytanyl groups than other lipids at the hydrophobic tail, causing a higher affinity with the hydrophobic surface of bR, the corresponding removal rates are slowest. In addition, as the reaction period of PM and CHAPS increases, the residual amounts of PGS and PGP-Me significantly decrease, in concomitance with the decelerated rates of the recovery of ground state and the decay of intermediate M, and the reduced transient population of intermediate O. PGS and PGP-Me are the lipids with the highest correlation to the photocycle activity among the six polar lipids of PM. From a practical viewpoint, combining optical spectroscopy and mass spectrometry appears a promising approach to simultaneously track the functions and the concomitant active components in a given biological system.

Structures of the archaerhodopsin-3 transporter reveal that disordering of internal water networks underpins receptor sensitization

Many transmembrane receptors have a desensitized state, in which they are unable to respond to external stimuli. The family of microbial rhodopsin proteins includes one such group of receptors, whose inactive or dark-adapted (DA) state is established in the prolonged absence of light. Here, we present high-resolution crystal structures of the ground (light-adapted) and DA states of Archaerhodopsin-3 (AR3), solved to 1.1 Å and 1.3 Å resolution respectively. We observe significant differences between the two states in the dynamics of water molecules that are coupled via H-bonds to the retinal Schiff Base. Supporting QM/MM calculations reveal how the DA state permits a thermodynamic equilibrium between retinal isomers to be established, and how this same change is prevented in the ground state in the absence of light. We suggest that the different arrangement of internal water networks in AR3 is responsible for the faster photocycle kinetics compared to homologs.

Highlighting membrane protein structure and function: A celebration of the Protein Data Bank

Biological membranes define the boundaries of cells and compartmentalize the chemical and physical processes required for life. Many biological processes are carried out by proteins embedded in or associated with such membranes. Determination of membrane protein (MP) structures at atomic or near-atomic resolution plays a vital role in elucidating their structural and functional impact in biology. This endeavor has determined 1198 unique MP structures as of early 2021. The value of these structures is expanded greatly by deposition of their three-dimensional (3D) coordinates into the Protein Data Bank (PDB) after the first atomic MP structure was elucidated in 1985. Since then, free access to MP structures facilitates broader and deeper understanding of MPs, which provides crucial new insights into their biological functions. Here we highlight the structural and functional biology of representative MPs and landmarks in the evolution of new technologies, with insights into key developments influenced by the PDB in magnifying their impact.

Influence of Lipid Compositions in the Events of Retinal Schiff Base of Bacteriorhodopsin Embedded in Covalently Circularized Nanodiscs: Thermal Isomerization, Photoisomerization, and Deprotonation

Covalently circularized nanodiscs using circular membrane scaffold protein (MSP) serve as a suitable membrane mimetic for transmembrane proteins by providing stability and tunability in lipid compositions, providing controllable biological environments for targeted proteins. In this work, monomeric bacteriorhodopsin (mbR) was embedded in lipid nanodiscs of different lipid compositions using negatively charged lipid dioleoyl phosphatidylglycerol (DOPG) and the zwitterion lipid dioleoyl phosphatidylcholine (DOPC), and the events associated with the retinal Schiff base, including the thermal isomerization during the dark adaptation, photoisomerization, and deprotonation, were investigated. The retinal thermal isomerization from all-trans, 15-anti to the 13-cis, 15-syn configuration during the dark adaptation was accelerated in the DOPG bilayer, whereas the processes in the DOPC bilayer and in Triton X-100 micelles were similar. This observation indicated that the negatively charged lipid reduced the barrier for retinal thermal isomerization at C₁₃═C₁₄-C₁₅═N in the ground electronic state. Furthermore, the broader absorption contour of mbR in the DOPC nanodisc probably indicated various retinal isomers in the light-adapted state, consistent with the observed nontwo-state dark adaptation kinetics. Moreover, the kinetics of the photoisomerization of the retinal was slightly decelerated upon increasing the content of DOPC. However, the cascading deprotonation of the protonated Schiff base is not dependent on the types of the surrounding lipids in the nanodiscs. In summary, our research deepens the understanding of the coupling between lipid membrane and the photochemistry of bR retinal Schiff base. Combined with the results of our previous works (Lee, T.-Y.; Yeh, V.; Chuang, J.; Chan, J. C. C.; Chu, L.-K.; Yu, T.-Y. Biophys. J. 2015, 109, 1899-1906; Kao, Y.-M.; Cheng, C.-H.; Syue, M.-L.; Huang, H.-Y.; Chen, I-C.; Yu, T.-Y.; Chu, L.-K. J. Phys. Chem. B 2019, 123, 2032-2039), these outcomes extend our understanding of the control of photochemistry and biophysical events for other photosynthetic proteins via altering the lipid environments.

Characterization of a Biomimetic Mesophase Composed of Nonionic Surfactants and an Aqueous Solvent

We have investigated the physical and biomimetic properties of a sponge (L₃) phase composed of pentaethylene glycol monododecyl ether (C₁₂E₅), a nonionic surfactant, an aqueous solvent, and a cosurfactant. The following cosurfactants, commonly used for solubilizing membrane proteins, were incorporated: n-octyl-β-d-glucopyranoside (β-OG), n-dodecyl-β-d-maltopyranoside (DDM), 4-cyclohexyl-1-butyl-β-d-maltoside (CYMAL-4), and 5-cyclohexyl-1-pentyl-β-d-maltoside (CYMAL-5). Partial phase diagrams of these systems were created. The L₃ phase was characterized using crossed polarizers, diffusion of a fluorescent probe by fluorescence recovery after pattern photobleaching (FRAPP), and freeze fracture electron microscopy (FFEM). By varying the hydration of the phase, we were able to tune the distance between adjacent bilayers. The characteristic distance (d_b) of the phase was obtained from small angle scattering (SAXS/SANS) as well as from FFEM, which yielded complementary d_b values. These d_b values were neither affected by the nature of the cosurfactant nor by the addition of membrane proteins. These findings illustrate that a biomimetic surfactant sponge phase can be created in the presence of several common membrane protein-solubilizing detergents, thus making it a versatile medium for membrane protein studies.

Surfactant bilayers maintain transmembrane protein activity

In vitro studies of membrane proteins are of interest only if their structure and function are significantly preserved. One approach is to insert them into the lipid bilayers of highly viscous cubic phases rendering the insertion and manipulation of proteins difficult. Less viscous lipid sponge phases are sometimes used, but their relatively narrow domain of existence can be easily disrupted by protein insertion. We present here a sponge phase consisting of nonionic surfactant bilayers. Its extended domain of existence and its low viscosity allow easy insertion and manipulation of membrane proteins. We show for the first time, to our knowledge, that transmembrane proteins, such as bacteriorhodopsin, sarcoplasmic reticulum Ca(2+)ATPase (SERCA1a), and its associated enzymes, are fully active in a surfactant phase.

Nanoscale electron transport and photodynamics enhancement in lipid-depleted bacteriorhodopsin monomers

Potential future use of bacteriorhodopsin (bR) as a solid-state electron transport (ETp) material requires the highest possible active protein concentration. To that end we prepared stable monolayers of protein-enriched bR on a conducting HOPG substrate by lipid depletion of the native bR. The ETp properties of this construct were then investigated using conducting probe atomic force microscopy at low bias, both in the ground dark state and in the M-like intermediate configuration, formed upon excitation by green light. Photoconductance modulation was observed upon green and blue light excitation, demonstrating the potential of these monolayers as optoelectronic building blocks. To correlate protein structural changes with the observed behavior, measurements were made as a function of pressure under the AFM tip, as well as humidity. The junction conductance is reversible under pressure changes up to ∼300 MPa, but above this pressure the conductance drops irreversibly. ETp efficiency is enhanced significantly at >60% relative humidity, without changing the relative photoactivity significantly. These observations are ascribed to changes in protein conformation and flexibility and suggest that improved electron transport pathways can be generated through formation of a hydrogen-bonding network.

Amphipol-assisted folding of bacteriorhodopsin in the presence or absence of lipids: functional consequences

Amphipols are short amphipathic polymers designed to stabilize membrane proteins in aqueous solutions in the absence of detergent. Bacteriorhodopsin (BR), a light-driven proton pump, has been denatured, either by direct solubilization of the purple membrane in sodium dodecylsulfate (SDS) solution or by a procedure that involves delipidation with organic solvent followed by transfer to SDS, and renatured in amphipol A8-35. The effect of different renaturation procedures and of the presence or absence of lipids and the cofactor retinal have been investigated. The resulting samples have been characterized by absorbance spectroscopy, size-exclusion chromatography, thermostability measurements, and determination of photocycle kinetics. Transfer to A8-35 can be achieved by SDS precipitation, dilution, or dialysis, the first route resulting in the highest yield of refolding. Functional BR can be refolded whether in the presence or absence of lipids, higher yields being achieved in their presence. Retinal is not required for the protein to refold, but it stabilizes the refolded form and, thereby, improves folding yields. Lipids are not required for BR to perform its complete photocycle, but their presence speeds up the return to the ground state. Taken together, these data indicate that a membrane or membrane-mimetic environment is not required for correct decoding of the chemical information contained in the sequence of BR; functional folding is possible even in the highly foreign environment of lipid-free amphipols. BR interactions with lipids, however, contribute to an effective photocycle.

Green proteorhodopsin reconstituted into nanoscale phospholipid bilayers (nanodiscs) as photoactive monomers

Over 4000 putative proteorhodopsins (PRs) have been identified throughout the oceans and seas of the Earth. The first of these eubacterial rhodopsins was discovered in 2000 and has expanded the family of microbial proton pumps to all three domains of life. With photophysical properties similar to those of bacteriorhodopsin, an archaeal proton pump, PRs are also generating interest for their potential use in various photonic applications. We perform here the first reconstitution of the minimal photoactive PR structure into nanoscale phospholipid bilayers (nanodiscs) to better understand how protein-protein and protein-lipid interactions influence the photophysical properties of PR. Spectral (steady-state and time-resolved UV-visible spectroscopy) and physical (size-exclusion chromatography and electron microscopy) characterization of these complexes confirms the preparation of a photoactive PR monomer within nanodiscs. Specifically, when embedded within a nanodisc, monomeric PR exhibits a titratable pK(a) (6.5-7.1) and photocycle lifetime (∼100-200 ms) that are comparable to the detergent-solubilized protein. These ndPRs also produce a photoactive blue-shifted absorbance, centered at 377 or 416 nm, that indicates that protein-protein interactions from a PR oligomer are required for a fast photocycle. Moreover, we demonstrate how these model membrane systems allow modulation of the PR photocycle by variation of the discoidal diameter (i.e., 10 or 12 nm), bilayer thickness (i.e., 23 or 26.5 Å), and degree of saturation of the lipid acyl chain. Nanodiscs also offer a highly stable environment of relevance to potential device applications.

Tandem facial amphiphiles for membrane protein stabilization

We describe a new type of synthetic amphiphile that is intended to support biochemical characterization of intrinsic membrane proteins. Members of this new family displayed favorable behavior with four of five membrane proteins tested, and these amphiphiles formed relatively small micelles.

Correlation between absorption maxima and thermal isomerization rates in bacteriorhodopsin

The reported rates of thermal 13-cis to all-trans isomerization of the protonated Schiff base of retinal (PSBR) in solution and in bacteriorhodopsin (BR) are shown to be correlated with the red shift in the absorption maximum of the chromophore, though the linear fit is different for BR and for a model PSBR in solution. Because the red shift in the absorption has been previously shown to be correlated with pi-electron delocalization in the chromophore, this suggests that the thermal isomerization rate is largely regulated by the amount of double bond character in the chromophore. Because the linear fit of isomerization rates with absorption maxima is different for BR and the model PSBR, specific interactions of the protein with the chromophore must also be a factor in determining thermal isomerization rates in BR. A model of the later steps in the photocycle of BR is presented in which the 13-cis to all-trans thermal isomerization occurs during the O intermediate.

A new hybrid protein for production of recombinant bacteriorhodopsin in Escherichia coli

Unique properties of bacteriorhodopsin, namely, photochromism and high thermal stability, make this protein an attractive target for physico-chemical studies, as well as for various biotechnological applications. Using Mistic as a suitable carrier for insertion of recombinant membrane proteins into cytoplasmic membrane of Escherichia coli, we developed a system for overexpression of bacteriorhodopsin and worked out an efficient procedure for its purification and renaturation with the final yield of 120 mg/l of refolded protein, which is the highest value reported to date for bacteriorhodopsin produced in E. coli. Functional activity of recombinant bacteriorhodopsin was confirmed by spectroscopic and electrochemical assays.

Structural guidance of the photocycle of channelrhodopsin-2 by an interhelical hydrogen bond

Channelrhodopsin-2 (ChR2) is a light-gated cation channel and a member of the family of retinylidene photoreceptors. Since the demonstration of light-induced depolarization of ChR2-expressing animal cell membranes, it was increasingly exploited for light triggering of action potentials. ChR2 conducts cations upon light absorption that embodies retinal isomerization as the primary reaction and a structurally unknown opening mechanism. It is evident from spectroscopic data that protonation reactions at the Schiff base are part of the photocycle, comparable to other microbial-type rhodopsins. However, the connection between the processes at the chromophore site and the channel's pore remained enigmatic. Here, we use slow mutants of ChR2 that we generated by disturbing a postulated hydrogen bond when mutating C128 in the transmembrane (TM) helix 3 and D156 in TM helix 4. The lifetime of the mutants' open state is increased more than 100 times. We investigated the spectral properties of the slow mutants. Whereas the deprotonation of the Schiff base (yielding P390) occurs on the same time scale as that of the wild type, reprotonation to P520 is retarded in the slow mutants and their photocycle is split, leading to the presence of two photointermediates, P390 and P520, in the open state. The photoreactions of P390 and P520 lead to a quenching of the current in electrophysiological measurements. We conclude that the putative hydrogen bond between C128 and D156 is an important structural determinant of the channel's closing reaction. Furthermore, we show that the D156A mutant is even more suitable for light control of excitable cells than C128A.

Tripod Amphiphiles for Membrane Protein Manipulation

Integral membrane proteins (IMPs) are crucial biological components, mediating the transfer of material and information between cells and their environment. Many IMPs have proven to be difficult to isolate and study. High-resolution structural information on this class of proteins is limited, largely because of difficulties in generating soluble forms of such proteins that retain native folding and activity, and difficulties in generating high-quality crystals from such preparations. Isolated IMPs typically do not dissolve in aqueous solution, a property that arises from the large patches of hydrophobic surface necessary for favorable interactions with the core of a lipid bilayer. Detergents are generally required for IMP solubilization: hydrophobic segments of detergent molecules cluster around and shield from water the hydrophobic protein surfaces. The critical role played by detergents in membrane protein manipulation, and the fact that many IMPs are recalcitrant to solubilization and/or crystallization with currently available detergents, suggest that it should be valuable to explore new types of amphiphiles for these purposes. This review constitutes a progress report on our long-term effort to develop a new class of organic molecules, collectively designated "tripod amphiphiles," that are intended as alternatives to conventional detergents for membrane protein manipulation. One long-range goal of this research is to identify new types of amphiphiles that facilitate IMP crystallization. This review should help introduce an important biochemical need to organic chemists, and perhaps inspire new approaches to the problem.

Bacteriorhodopsin/amphipol complexes: structural and functional properties

The membrane protein bacteriorhodopsin (BR) can be kept soluble in its native state for months in the absence of detergent by amphipol (APol) A8-35, an amphiphilic polymer. After an actinic flash, A8-35-complexed BR undergoes a complete photocycle, with kinetics intermediate between that in detergent solution and that in its native membrane. BR/APol complexes form well defined, globular particles comprising a monomer of BR, a complete set of purple membrane lipids, and, in a peripheral distribution, approximately 2 g APol/g BR, arranged in a compact layer. In the absence of free APol, BR/APol particles can autoassociate into small or large ordered fibrils.

Surface and Dynamic Structures of Bacteriorhodopsin in a 2D Crystal, a Distorted or Disrupted Lattice, as Revealed by Site-directed Solid-state 13C NMR†

The 3D structure of bacteriorhodopsin (bR) obtained by X-ray diffraction or cryo-electron microscope studies is not always sufficient for a picture at ambient temperature where dynamic behavior is exhibited. For this reason, a site-directed solid-state 13C NMR study of fully hydrated bR from purple membrane (PM), or a distorted or disrupted lattice, is very valuable in order to gain insight into the dynamic picture. This includes the surface structure, at the physiologically important ambient temperature. Almost all of the 13C NMR signals are available from [3-13C]Ala or [1-13C]Val-labeled bR from PM, although the 13C NMR signals from the surface areas, including loops and transmembrane alpha-helices near the surface (8.7 angstroms depth), are suppressed for preparations labeled with [1-13C]Gly, Ala, Leu, Phe, Tyr, etc. due to a failure of the attempted peak-narrowing by making use of the interfered frequency of the frequency of fluctuation motions with the frequency of magic angle spinning. In particular, the C-terminal residues, 226-235, are present as the C-terminal alpha-helix which is held together with the nearby loops to form a surface complex, although the remaining C-terminal residues undergo isotropic motion even in a 2D crystalline lattice (PM) under physiological conditions. Surprisingly, the 13C NMR signals could be further suppressed even from [3-13C]Ala- or [1-13C]Val-bR, due to the acquired fluctuation motions with correlation times in the order of 10(-4) to 10(-5) s, when the 2D lattice structure is instantaneously distorted or completely disrupted, either in photo-intermediate, removed retinal or when embedded in the lipid bilayers.

Photobleaching of Bacteriorhodopsin Solubilized with Triton X-100

In the current studies, we examined the effects of hexagonal lattice formation with lipid membranes on the structural stability of native bacteriorhodopsin (bR). Denaturation kinetic measurements for bR solubilized with the mild nonionic detergent Triton X-100 (TX100) were performed in the dark and under illumination by visible light. The solubilized bR was stable in the dark over a wide concentration range of TX100 (1 to 200 mM). In purple membranes, a bilobed band was observed in visible circular dichroism spectra due to interactions between neighboring chromophores. At all concentrations of TX100, this was replaced by a single positive band. Upon illumination with visible light, TX100-solubilized bR clearly showed photobleaching to bacterioopsin. These experimental results suggest that photobleaching is due to a lack of intermolecular interactions inside the purple membrane lattice. Extensive kinetic measurements further revealed that the rate constant of photobleaching is strongly dependent on the detergent concentration, although the activation energy for photobleaching does not significantly change with the TX100 concentration. The mechanism of photobleaching for the solubilized bR is discussed with respect to detergent micelle properties.

Backbone dynamics of membrane proteins in lipid bilayers: the effect of two-dimensional array formation as revealed by site-directed solid-state 13C NMR studies on [3-13C]Ala- and [1-13C]Val-labeled bacteriorhodopsin

We have recorded site-directed solid-state 13C NMR spectra of [3-13C]Ala- and [1-13C]Val-labeled bacteriorhodopsin (bR) as a typical membrane protein in lipid bilayers, to examine the effect of formation of two-dimensional (2D) lattice or array of the proteins toward backbone dynamics, to search the optimum condition to be able to record full 13C NMR signals from whole area of proteins. Well-resolved 13C NMR signals were recorded for monomeric [3-13C]Ala-bR in egg phosphatidylcholine (PC) bilayer at ambient temperature, although several 13C NMR signals from the loops and transmembrane alpha-helices were still suppressed. This is because monomeric bR reconstituted into egg PC, dimyristoylphosphatidylcholine (DMPC) or dipalmytoylphosphatidylcholine (DPPC) bilayers undergoes conformational fluctuations with frequency in the order of 10(4)-10(5) Hz at ambient temperature, which is interfered with frequency of magic angle spinning or proton decoupling. It turned out, however, that the 13C NMR signals of purple membrane (PM) were almost fully recovered in gel phase lipids of DMPC or DPPC bilayers at around 0 degrees C. This finding is interpreted in terms of aggregation of bR in DMPC or DPPC bilayers to 2D hexagonal array in the presence of endogenous lipids at low temperature, resulting in favorable backbone dynamics for 13C NMR observation. It is therefore concluded that [3-13C]Ala-bR reconstituted in egg PC, DMPC or DPPC bilayers at ambient temperature, or [3-13C]Ala- and [1-13C]Val-bR at low temperature gave rise to well-resolved 13C NMR signals, although they are not always completely the same as those of 2D hexagonal lattice from PM.

Comparison of the dynamics of the primary events of bacteriorhodopsin in its trimeric and monomeric states

In this paper, femtosecond pump-probe spectroscopy in the visible region of the spectrum has been used to examine the ultrafast dynamics of the retinal excited state in both the native trimeric state and the monomeric state of bacteriorhodopsin (bR). It is found that the excited state lifetime (probed at 490 nm) increases only slightly upon the monomerization of bR. No significant kinetic difference is observed in the recovery process of the bR ground state probed at 570 nm nor in the fluorescent state observed at 850 nm. However, an increase in the relative amplitude of the slow component of bR excited state decay is observed in the monomer, which is due to the increase in the concentration of the 13-cis retinal isomer in the ground state of the light-adapted bR monomer. Our data indicate that when the protein packing around the retinal is changed upon bR monomerization, there is only a subtle change in the retinal potential surface, which is dependent on the charge distribution and the dipoles within the retinal-binding cavity. In addition, our results show that 40% of the excited state bR molecules return to the ground state on three different time scales: one-half-picosecond component during the relaxation of the excited state and the formation of the J intermediate, a 3-ps component as the J changes to the K intermediate where retinal photoisomerization occurs, and a subnanosecond component during the photocycle.

Subdomains in the F and G helices of bacteriorhodopsin regulate the conformational transitions of the reprotonation mechanism

We have performed cysteine scanning mutagenesis of the bacteriorhodopsin mutant D85N to explore the role of individual amino acids in the conformational transitions of the reprotonation mechanism. We have used whole-cell reflectance spectroscopy to evaluate the spectral properties of the 59 mutants generated during a scan of the entire F and G helices and the intervening loop region. Cys mutants were grouped into one of six phenotypes based on the spectral changes associated with their M <--> N <--> O intermediate-state transitions. Mutations that produced similar phenotypes were found to cluster in discrete molecular domains and indicate that M, N, and O possess distinct structures and that unique molecular interactions regulate the transitions between them. The distribution of these domains suggests that 1) the extramembranous loop region is involved in the stabilization of the N and M intermediates, 2) lipid-protein interactions play a key role in the accumulation of N, and 3) the amino acid side-chain interactions in the extracellular portion of the interface between helices G and A participate in the accumulation of M.

The laser-induced blue state of bacteriorhodopsin: mechanistic and color regulatory roles of protein-protein interactions, protein-lipid interactions, and metal ions

In this paper we characterize the mechanistic roles of the crystalline purple membrane (PM) lattice, the earliest bacteriorhodopsin (BR) photocycle intermediates, and divalent cations in the conversion of PM to laser-induced blue membrane (LIBM; lambda(max)= 605 nm) upon irradiation with intense 532 nm pulses by contrasting the photoconversion of PM with that of monomeric BR solubilized in reduced Triton X-100 detergent. Monomeric BR forms a previously unreported colorless monomer photoproduct which lacks a chromophore band in the visible region but manifests a new band centered near 360 nm similar to the 360 nm band in LIBM. The 360 nm band in both LIBM and colorless monomer originates from a Schiff base-reduced retinyl chromophore which remains covalently linked to bacterioopsin. Both the PM-->LIBM and monomer-->colorless monomer photoconversions are mediated by similar biphotonic mechanisms, indicating that the photochemistry is localized within single BR monomers and is not influenced by BR-BR interactions. The excessively large two-photon absorptivities (> or =10(6) cm(4) s molecule(-1) photon(-1)) of these photoconversions, the temporal and spectral characteristics of pulses which generate LIBM in high yield, and an action spectrum for the PM-->LIBM photoconversion all indicate that the PM-->LIBM and Mon-->CMon photoconversions are both mediated by a sequential biphotonic mechanism in which is the intermediate which absorbs the second photon. The purple-->blue color change results from subsequent conformational perturbations of the PM lattice which induce the removal of Ca(2+) and Mg(2+) ions from the PM surface.

Alkane derivative-bacteriorhodopsin interaction: proton transport and protein structure

The effects of alkane derivatives, 1-alcohols (ROH), aliphatic amine hydrochlorides (RNH(2).HCl) and sodium aliphatic carboxylates (ROONa), on the proton pumping activity of bacteriorhodopsin (bR) in a purple membrane have been examined. Photocurrents in bR in the purple membrane adsorbed onto polyester thin film were recorded before and after exposure to these test substances. The peak photocurrent in bR was reversibly suppressed by each substance. From the dose-response curve, the concentrations required to reduce the peak capacitive current by 50% were determined for each homolog and then the standard free energies per CH(2) for the adsorption of the alkane derivatives to the site of action were estimated: -3.13 kJ mol(-1) for ROH, -3.05 kJ mol(-1) for RNH(3)(+), and -2.95 kJ mol(-1) for ROO(-). The proton pumping activity of bR was mainly suppressed by the hydrophobic interaction with the additive. The relative potencies of the functional groups of the alkane derivatives were almost comparable between 1-octanol (C(8)OH) and octylamine hydrochloride (C(8)NH(3)(+)) and about 10 times less effective for sodium octanoate (C(8)OO(-)) than for others. The addition of C(8)OH or C(8)OO(-) changed the absorption spectra of bR with a maximum at 560 nm to the spectra of the intermediate state with a maximum at 480 nm, while the C(8)NH(3)(+) decreased the intensity of the 560 nm band only with no blue-shift by the 480 nm band. We conclude that the action of the alkane derivatives is nonspecific and directed to all organized purple membrane structures and that the binding sites of the ROH and ROO(-) are different from that of RNH(3)(+).

Microsecond exchange of internal water molecules in bacteriorhodopsin

The proton-conducting pathway of bacteriorhodopsin (BR) contains at least nine internal water molecules that are thought to be key players in the proton translocation mechanism. Here, we report the results of a multinuclear (1H, 2H, 17O) magnetic relaxation dispersion (MRD) study with the primary goal of determining the rate of exchange of these internal water molecules with bulk water. This rate is of interest in current attempts to elucidate the molecular details of the proton translocation mechanism. The relevance of water exchange kinetics is underscored by recent crystallographic findings of substantial variations in the number and locations of internal water molecules during the photocycle. Moreover, internal water exchange is believed to be governed by conformational fluctuations in the protein and can therefore provide information about the thermal accessibility of functionally important conformational substates. The present 2H and 17O MRD data show that at least seven water molecules, or more if they are orientationally disordered, in BR have residence times (inverse exchange rate constant) in the range 0.1-10 micros at 277 K. At least five of these water molecules have residence times in the more restrictive range 0.1-0.5 micros. These results show that most or all of the deeply buried water molecules in BR exchange on a time-scale that is short compared to the rate-limiting step in the photocycle. The MRD measurements were performed on BR solubilized in micelles of octyl glucoside. From the MRD data, the rotational correlation time of detergent-solubilized BR was determined to 35 ns at 300 K, consistent with a monomeric protein in complex with about 150 detergent molecules. The solubilized protein was found to be stable in the dark for at least eight months at 277 K.

Unravelling the folding of bacteriorhodopsin

The folding mechanism of integral membrane proteins has eluded detailed study, largely as a result of the inherent difficulties in folding these proteins in vitro. The seven-transmembrane helical protein bacteriorhodopsin has, however, allowed major advances to be made, not just on the folding of this particular protein, but also on the factors governing folding of transmembrane alpha-helical proteins in general. This review focusses on kinetic and equilibrium studies of bacteriorhodopsin folding in vitro. It covers what is currently known about secondary and tertiary structure formation as well as the events accompanying retinal binding, for protein in detergent and lipid systems, including native membrane samples.

Coupling photoisomerization of retinal to directional transport in bacteriorhodopsin

In order to understand how isomerization of the retinal drives unidirectional transmembrane ion transport in bacteriorhodopsin, we determined the atomic structures of the BR state and M photointermediate of the E204Q mutant, to 1.7 and 1.8 A resolution, respectively. Comparison of this M, in which proton release to the extracellular surface is blocked, with the previously determined M in the D96N mutant indicates that the changes in the extracellular region are initiated by changes in the electrostatic interactions of the retinal Schiff base with Asp85 and Asp212, but those on the cytoplasmic side originate from steric conflict of the 13-methyl retinal group with Trp182 and distortion of the pi-bulge of helix G. The structural changes suggest that protonation of Asp85 initiates a cascade of atomic displacements in the extracellular region that cause release of a proton to the surface. The progressive relaxation of the strained 13-cis retinal chain with deprotonated Schiff base, in turn, initiates atomic displacements in the cytoplasmic region that cause the intercalation of a hydrogen-bonded water molecule between Thr46 and Asp96. This accounts for the lowering of the pK(a) of Asp96, which then reprotonates the Schiff base via a newly formed chain of water molecules that is extending toward the Schiff base.

Bacteriorhodopsin

Bacteriorhodopsin is a seven-transmembrane helical protein that contains all-trans retinal. In this light-driven pump, a reaction cycle initiated by photoisomerization to 13-cis causes translocation of a proton across the membrane. Local changes in the geometry of the protonated Schiff base and the proton acceptor Asp85, and the proton conductivities of the half channels that lead from this active site to the two membrane surfaces, interact so as to allow timely proton transfers that result in proton release on the extracellular side and proton uptake on the cytoplasmic one. The details of the steps in this photocycle, and the underlying principles that ensure unidirectionality of the movement of a proton across the protein, provide strong clues to how ion pumps function.

An insertion or deletion in the extramembrane loop connecting helices E and F of archaerhodopsin-1 affects in vitro refolding and slows the photocycle

Upon addition of retinal, archaeopsin-1 expressed in Escherichia coli (ecaO-1002) regenerated the chromophore in dimyristoyl phosphatidylcholine (DMPC), 3-[(3-cholamidopropyl) dimethylammonio]-1-propanesulfonate (CHAPS) and sodium dodecyl sulfate (SDS) mixed micelles as efficiently as the same opsin prepared from halobacteria. Introduction of an insertion or a deletion of five amino acids into the surface loop connecting helices E and F changed the secondary and tertiary structures of ecaO-1002 in SDS, and diminished regeneration of the chromophore. The effect of the insertion and deletion on the in vitro refolding was specific to archaeopsin because the same insertion introduced at the corresponding position of bacterioopsin (bO) did not affect chromophore regeneration. The photocycle of the regenerated ecaR-1002 decreased in DMPC/CHAPS/SDS mixed micelles compared with that of aR-1 in the claret membrane, which was consistent with the reported behavior of bO. Unexpectedly, the insertion and deletion in loop EF perturbed the photocycle of the regenerated ecaR-1002. The accumulation of long-lived N- and O-like intermediates suggested that the insertion and deletion slowed down the proton uptake steps at the cytoplasmic surface.

Spectrally silent transitions in the bacteriorhodopsin photocycle

The photocycle kinetics of bacteriorhodopsin were analyzed from 0 to 40 degrees C at 101 wavelengths (330-730 nm). The data can be satisfactorily approximated by eight exponents. The slowest component (half-time 20 ms at 20 degrees C) belongs to the 13-cis cycle. The residual seven exponentials that are sufficient to describe the all-trans photocycle indicate that at least seven intermediates of the all-trans cycle must exist, although only five spectrally distinct species (K, L, M, N, and O) have been identified. These seven exponentials and their spectra at different temperatures provide the basis for the discussion of various kinetic schemes of the relaxation. The simplest model of irreversible sequential transitions includes after the first K--> L step the quasiequilibria of L<-->M, M<-->N, and N<-->O intermediates. These quasiequilibria are controlled by rate-limiting dynamics of the protein and/or proton transfer steps outside the chromophore region. Thus there exists an apparent kinetic paradox (i.e., why is the number of exponents of relaxation (at least seven) higher than the number of distinct spectral intermediates (only five)), which can be explained by assuming that some of the transitions correspond to changes in the quasiequilibria between spectrally distinct intermediates (i.e., are spectrally silent).

Correlation between surfactant/micelle structure and the stability of bacteriorhodopsin in solution

The rate of solubilization and isothermal bleaching of bacteriorhodopsin (bR) in a series of nine alkylammonium surfactants is studied by using time-resolved optical spectroscopy. The surfactant series RN(+)R'(3) covers a range in tail length (R = C(12)H(25), C(14)H(29), or C(16)H(33)) and headgroup size and hydrophobicity (R' = CH(3); C(2)H(5), or C(3)H(7)). The rate of bleaching increases initially with increasing surfactant concentration but decreases at higher concentrations. Possible explanations for this behavior are discussed. The kinetic data are consistent with the penetration of the surfactant into the protein interior. Interaction of the surfactants with the protein is a complicated, multistep process, and the rate curves are a function of at least four variables: 1) the micellar environment, 2) the length of the surfactant tail, 3) the size of the headgroup, and 4) the hydrophobicity of the headgroup. Our data provide new insights into the molecular characteristics that help define the performance of surfactants in the solubilization and denaturation of membrane-bound proteins.

Overexpression of bacterio-opsin in Escherichia coli as a water-soluble fusion to maltose binding protein: efficient regeneration of the fusion protein and selective cleavage with trypsin

Bacteriorhodopsin (bR) is a light-driven proton pump from Halobacterium salinarium and is a model system for studying membrane protein folding, stability, function, and structure. bR is composed of bacterio-opsin (bO), the 248-amino acid apo protein, and all-trans retinal, which is linked to lysine 216 via a protonated Schiff base. A bO gene (sbOd) possessing 29 unique restriction sites and a carboxyl-terminal purification epitope (1D4, nine amino acids) has been designed and synthesized. Overexpression of bO was achieved by fusion to the carboxyl terminus of maltose binding protein (MBP). The expressed fusion protein (MBP-sbO-1D4) formed inclusion bodies in Escherichia coli and, following solubilization with urea and removal of the urea by dialysis, approximately 170 mg of approximately 75% pure MBP-sbO-1D4 was obtained from 1 L of culture. MBP-sbO-1D4 formed high molecular weight (> or = 2,000 kDa) oligomers that were water-soluble. The synthetic bO with the 1D4 tag (sbO-1D4) was separated from MBP by trypsin cleavage at the factor Xa site between the MBP and sbO-1D4 domains. Selective trypsin cleavage at the factor Xa site, instead of at the 14 other potential trypsin sites within bO, was accomplished by optimization of the digestion conditions. Both MBP-sbO-1D4 and sbO-1D4 were regenerated with all-trans retinal and purified to homogeneity. In general, 6-10 mg of sbR-1D4 and 52 mg of MBP-sbR-1D4 were obtained from 1 L of cell culture. No significant differences in terms of UV/vis light absorbance, light/dark adaptation, and photocycle properties were observed among sbR-1D4, MBP-sbR-1D4, and bR from H. salinarium.

Membrane-mediated control of the bacteriorhodopsin photocycle

The ability of actinic light to modify the proportion of fast and slow forms of the M intermediate (i.e., Mf and M(s)) in the bacteriorhodopsin (BR) photocycle is lost by exposure of the purple membrane (PM) to 0.05% Triton for 1-2 min. The decay path of Mf through the O intermediate is also lost, and new, much slower kinetic forms of M appear. In this brief exposure, the trimer structure for BR, as measured by circular dichroism (CD) exciton coupling and sedimentability, is unaffected. The optical properties of the treated PM are affected within seconds of exposure to the detergent as indicated by an increase in transmittance and a blue shift in the wavelength of maximum absorbance for the ground state. Different concentrations of Triton cause reproducibly different changes in the kinetics of the system. These observations support the view that the BR trimer-membrane interaction is important in controlling the BR photocycle.

Cell-free synthesis, functional refolding, and spectroscopic characterization of bacteriorhodopsin, an integral membrane protein

Bacteriorhodopsin (bR) is an integral membrane protein which functions as a light-driven proton pump in Halobacterium halobium (also known as Halobacterium salinarium). The cell-free synthesis of bR in quantities sufficient for FTIR and NMR spectroscopy and the ability to selectively isotope label bR using aminoacylated suppressor tRNAs would provide a powerful approach for studying the role of specific amino acid residues. However, no integral membrane protein has yet been expressed in a cell-free system in quantities sufficient for such biophysical studies. We report the cell-free synthesis of bacterioopsin, its purification, its refolding in polar lipids from H. halobium, and its regeneration with all-trans-retinal to yield bacteriorhodopsin in a form functionally similar to bR in purple membrane. Importantly, the yields obtained from in vitro and in vivo expression are comparable. Functionality of the cell-free expressed bR is established using static and time-resolved absorption spectroscopy and FTIR difference spectroscopy.

Proton translocation mechanism and energetics in the light-driven pump bacteriorhodopsin

In spite of many still unsolved problems, the mechanism and energetics of the light-driven proton transport are now basically understood. Energy captured during photoexcitation, and retained in the form of bond rotations and strains of the retinal, is transformed into directed changes in the pKa values of vectorially arranged proton transfer groups. The framework for the spatial and temporal organization of these changes is provided by the protein near the retinal Schiff base. The transport is completed by proton transfer among three essential groups in three domains lying roughly parallel with the membrane plane (Fig. 1): (a) the anionic D85 that is included in a complex of residues on the extracellular side containing also R82, D212, Y57 and bound water; (b) the protonated Schiff base; and (c) the protonated D96 that is included in a complex of residues on the cytoplasmic side containing also R227, T46, S226, and bound water. Other neighboring polar groups and water bound elsewhere which play a role in the transport do so either by further influencing the pKa values of the three protonable groups, or by providing passive pathways for proton transfer. The Schiff base proton, destabilized after photoexcitation, is transferred to the low pKa group D85 located on the extracellular side. The access of the deprotonated Schiff base then changes to the cytoplasmic side (the 'reprotonation switch') and its proton affinity increases. Finally, the proton of the high pKa group D96, with access to the cytoplasmic side, is destabilized by a protein conformational change through rearrangement of R227, T46, S226 and bound water, and becomes transferred to the Schiff base. As shown schematically in Fig. 3, these internal events are coupled to proton release and uptake at the two aqueous surfaces. The charge of the extracellular hydrogen-bonded complex is redistributed upon protonation of D85, and if the pH is above the pKa of the complex a proton is released to the bulk. After reprotonation of the Schiff base the pKa of the cytoplasmic hydrogen-bonded complex is raised well above the pH, and D96 regains a proton from the bulk. If the pH is lower than the pKa of the extracellular complex the proton release is delayed until the end of the photocycle. In either sequence there is net transfer of a proton from the cytoplasmic to the extracellular phase. The transfer of excess free energy from the chromophore to the protein, and finally to the transported proton, is described by a characteristic thermodynamic cycle.(ABSTRACT TRUNCATED AT 400 WORDS)

Structure at 2.5 A of a designed peptide that maintains solubility of membrane proteins

A 24-amino acid peptide designed to solubilize integral membrane proteins has been synthesized. The design was for an amphipathic alpha helix with a "flat" hydrophobic surface that would interact with a transmembrane protein as a detergent. When mixed with peptide, 85 percent of bacteriorhodopsin and 60 percent of rhodopsin remained in solution over a period of 2 days in their native forms. The crystal structure of peptide alone showed it to form an antiparallel four-helix bundle in which monomers interact, flat surface to flat surface, as predicted.

Two-dimensional crystallization of Escherichia coli-expressed bacteriorhodopsin and its D96N variant: high resolution structural studies in projection

Highly ordered two-dimensional (2-D) crystals of Escherichia coli-expressed bacteriorhodopsin analog (e-bR) and its D96N variant (e-D96N) reconstituted in Halobacterium halobium lipids have been obtained by starting with the opsin protein purified in the denaturing detergent sodium dodecyl sulfate. These crystals embedded in glucose show electron diffraction in projection to better than 3.0 A at room temperature. This is the first instance that expressed bR or a variant has been crystallized in 2-D arrays showing such high order. The crystal lattice is homologous to that in wild-type bR (w-bR) in purple membranes (PM) and permit high resolution analyses of the structure of the functionally impaired D96N variant. The e-bR crystal is isomorphous to that in PM with an overall averaged fractional change of 12.7% (26-3.6-A resolution) in the projection structure factors. The projection difference Fourier map e-bR-PM at 3.6-A resolution indicates small conformational changes equivalent to movement of approximately < 7 C-atoms distributed within and in the neighborhood of the protein envelope. This result shows that relative to w-bR there are no global structural rearrangements in e-bR at this 3.6 A resolution level. The e-D96N crystal is isomorphous to the e-bR crystal with a smaller (9.2%) overall averaged fractional change in the structure factors. The significant structural differences between e-D96N and e-bR are concentrated at high resolution (5-3.6 A); however, these changes are small as quantified from the 3.6 A resolution e-D96N-e-bR Fourier difference map. The difference map showed no statistically significant peaks or valleys within 5 A in projection from the site of D96 substitution on helix C. Elsewhere within the protein envelope the integrated measure of peaks or valleys was < approximately 3 C-atom equivalents. Thus, our results show that for the isosteric substitution of Asp96 by Asn, the molecular conformation of bR in its ground state is essentially unaltered. Therefore, the known effect of D96N on the slowed M412 decay is not due to ground-state structural perturbations.