Polarization of cinnamoyl-CoA substrates bound to enoyl-CoA hydratase: correlation of (13)C NMR with quantum mechanical calculations and calculation of electronic strain energy

pH-Rate profiles establish that polyketide synthase dehydratase domains utilize a single-base mechanism

FosDH1 from module 1 of the fostriecin polyketide synthase (PKS) catalyzes the dehydration of a 3-hydroxybutyryl-SACP to the (E)-3-butenoyl-SACP. The steady-state kinetic parameters, kcat and kcat/Km, were determined over the pH range 3.0 to 9.2 for the FosDH1-catalyzed dehydration of the N-acetycsteamine thioester, 3-hydroxybutyryl-SNAC (3), to (E)-3-butenoyl-SNAC (4). The pH rate profiles for both log(kcat) and log(kcat/Km) each corresponded to a single pH-dependent ionization to give an active site general base, with a calculated pKa 6.1 ± 0.2 for kcat and pKa 5.7 ± 0.1 for kcat/Km. These results are inconsistent with the commonly suggested "two-base" (base-acid) mechanism for the dehydratases of PKS and fatty acid biosynthesis and support a simple one-base mechanism in which the universally conserved active site His residue acts as the base to deprotonate C-2 of the substrate, then redonates the proton to the C-3 hydroxyl group to promote C-O bond-cleavage and elimination of water. The carboxylate of the paired Asp or Glu residue is thought to bind and orient the hydroxyl group of the substrate in the stereoelectonically favored conformation.

Theoretical study on the chemical mechanism of enoyl-CoA hydratase and the form of inhibitor binding

Enoyl-CoA hydratase (ECH) catalyzes the second step in the vital β-oxidation pathway of fatty acid metabolism. This enzyme catalyzes the syn-addition of a water molecule across the double bond of 4-(N,N-dimethylamino) cinnamoyl-CoA (DAC-CoA). In this work, the reaction mechanisms of ECH were investigated using the density functional theory (DFT) methods. The different protonation states in which the important residues Glu164 and Glu144 are either neutral or ionized were considered. Four models of the active site were designed based on the X-ray crystal structure of the enzyme. The calculations gave strong support to the proposed mechanism and confirmed that both Glu164 and Glu144 are in a deprotonated state in the reaction mechanism of ECH. In addition, we constructed a model of the active site with the inhibitor acetoacetyl-CoA based on the crystal structure. Caomparison of the calculated energy barriers showed that binding of the keto-enol form of the inhibitor is more reasonable than that of the di-keto form in the inhibition process. Moreover, acetoacetyl-CoA was found to exhibit a keto-enol tautomerism when it acts as an inhibitor in the reaction. The present theoretical results indicated that both residues Glu164 and Glu144 are unprotonated in ECH with the substrate bound, while only Glu164 is unprotonated when the inhibitor binds ECH.

The isomerase and hydratase reaction mechanism of the crotonase active site of the multifunctional enzyme (type-1), as deduced from structures of complexes with 3S-hydroxy-acyl-CoA

The multifunctional enzyme, type-1 (MFE1) is involved in several lipid metabolizing pathways. It catalyses: (a) enoyl-CoA isomerase and (b) enoyl-CoA hydratase (EC 4.2.1.17) reactions in its N-terminal crotonase part, as well as (3) a 3S-hydroxy-acyl-CoA dehydrogenase (HAD; EC 1.1.1.35) reaction in its C-terminal 3S-hydroxy-acyl-CoA dehydrogenase part. Crystallographic binding studies with rat peroxisomal MFE1, using unbranched and branched 2E-enoyl-CoA substrate molecules, show that the substrate has been hydrated by the enzyme in the crystal and that the product, 3S-hydroxy-acyl-CoA, remains bound in the crotonase active site. The fatty acid tail points into an exit tunnel shaped by loop-2. The thioester oxygen is bound in the classical oxyanion hole of the crotonase fold, stabilizing the enolate reaction intermediate. The structural data of these enzyme product complexes suggest that the catalytic base, Glu123, initiates the isomerase reaction by abstracting the C2-proton from the substrate molecule. Subsequently, in the hydratase reaction, Glu123 completes the catalytic cycle by reprotonating the C2 atom. A catalytic water, bound between the OE1-atoms of the two catalytic glutamates, Glu103 and Glu123, plays an important role in the enoyl-CoA isomerase and the enoyl-CoA hydratase reaction mechanism of MFE1. The structural variability of loop-2 between MFE1 and its monofunctional homologues correlates with differences in the respective substrate preferences and catalytic rates.

Ring Current Effects in the Active Site of Medium-Chain Acyl-CoA Dehydrogenase Revealed by NMR Spectroscopy

Medium-chain acyl-CoA dehydrogenase (MCAD) catalyzes the flavin-dependent oxidation of fatty acyl-CoAs to the corresponding trans-2-enoyl-CoAs. The interaction of hexadienoyl-CoA (HD-CoA), a product analogue, with recombinant pig MCAD (pMCAD) has been studied using (13)C NMR and (1)H-(13)C HSQC spectroscopy. Upon binding to oxidized pMCAD, the chemical shifts of the C1, C2, and C3 HD carbons are shifted upfield by 12.8, 2.1, and 13.8 ppm, respectively. In addition, the (1)H chemical shift of the C3-H is also shifted upfield by 1.31 ppm while the chemical shift of the C4 HD-CoA carbon is unchanged upon binding. These changes in chemical shift are unexpected given the results of previous Raman studies which revealed that the C3=C2-C1=O HD enone fragment is polarized upon binding to MCAD such that the electron density at the C3 and C1 carbons is reduced, not increased (Pellet et al. Biochemistry 2000, 39, 13982-13992). To investigate the apparent discrepancy between the NMR and Raman data for HD-CoA bound to MCAD, (13)C NMR spectra have been obtained for HD-CoA bound to enoyl-CoA hydratase, an enzyme system that has also previously been studied using Raman spectroscopy. Significantly, binding to enoyl-CoA hydratase causes the chemical shifts of the C1 and C3 HD carbons to move downfield by 4.8 and 5.6 ppm, respectively, while the C2 resonance moves upfield by 2.2 ppm, in close agreement with the alterations in electron density at these carbons predicted from Raman spectroscopy (Bell, A. F.; Wu, J.; Feng, Y.; Tonge, P. J. Biochemistry 2001, 40, 1725-33). The large increase in shielding experienced by the C1 and C3 HD carbons in the HD-CoA/MCAD complex is proposed to arise from the ring current field from the isoalloxazine portion of the flavin cofactor. The flavin ring current, which is only present when the enzyme is placed in an external magnetic field, also explains the differences in (13)C NMR chemical shifts for acetoacetyl-CoA when bound as an enolate to MCAD and enoyl-CoA hydratase and is used to rationalize the observation that the line widths of the C1 and C3 resonances are narrower when the ligands are bound to MCAD than when they are free in the protein solution.

Quantifying energetic contributions to ground state destabilization

Vibrational spectroscopy has identified that in many cases, substrate association with enzyme active sites results in significant bond polarization. This bond polarization can be attributed to a combination of desolvation, conformational restriction, and true polarization by the local electric field. Quantum chemical calculations permit the extent of polarization to be quantified both in terms of partial charge and energy. The changes in vibrational frequency that occur during the binding process necessarily result in equilibrium isotope effects. The equilibrium isotope effect on association is one feature that differentiates isotope effects on k(cat) and k(cat)/K(m). An improved chemical understanding of the changes that occur on substrate binding will help elucidate the role of substrate activation in enzyme catalysis.

Stereoselectivity of enoyl-CoA hydratase results from preferential activation of one of two bound substrate conformers

Enoyl-CoA hydratase catalyzes the hydration of trans-2-crotonyl-CoA to 3(S)- and 3(R)-hydroxybutyryl-CoA with a stereoselectivity (3(S)/3(R)) of 400,000 to 1. Importantly, Raman spectroscopy reveals that both the s-cis and s-trans conformers of the substrate analog hexadienoyl-CoA are bound to the enzyme, but that only the s-cis conformer is polarized. This selective polarization is an example of ground state strain, indicating the existence of catalytically relevant ground state destabilization arising from the selective complementarity of the enzyme toward the transition state rather than the ground state. Consequently, the stereoselectivity of the enzyme-catalyzed reaction results from the selective activation of one of two bound substrate conformers rather than from selective binding of a single conformer. These findings have important implications for inhibitor design and the role of ground state interactions in enzyme catalysis.