Evidence that phosphate release is the rate-limiting step on the overall ATPase of psoas myofibrils prevented from shortening by chemical cross-linking

Protocols for Myosin and Actin-Myosin Assays Using Rapid, Stopped-Flow Kinetics

Fast transient kinetics using stopped-flow fluorimetry is now a powerful method for defining the ATPase cycle of myosin and its subfragments and has found wide use in defining the difference between myosin isoforms, myosins carrying disease linked mutations, and the effect of small molecules on the ATPase cycle. Here the protocols for completing the classical assays of myosin and actin.myosin using the stopped-flow are described. The assays include ATP and ADP binding to myosin and actin.myosin, displacement of ADP from myosin and actin.myosin, and the cleavage of ATP to ADP and phosphate on myosin. Single and multiple turnover assays are also described.

Single-molecule analysis reveals that regulatory light chains fine-tune skeletal myosin II function

Myosin II is the main force-generating motor during muscle contraction. Myosin II exists as different isoforms that are involved in diverse physiological functions. One outstanding question is whether the myosin heavy chain (MHC) isoforms alone account for these distinct physiological properties. Unique sets of essential and regulatory light chains (RLCs) are known to assemble with specific MHCs, raising the intriguing possibility that light chains contribute to specialized myosin functions. Here, we asked whether different RLCs contribute to this functional diversification. To this end, we generated chimeric motors by reconstituting the MHC fast isoform (MyHC-IId) and slow isoform (MHC-I) with different light-chain variants. As a result of the RLC swapping, actin filament sliding velocity increased by ∼10-fold for the slow myosin and decreased by >3-fold for the fast myosin. Results from ensemble molecule solution kinetics and single-molecule optical trapping measurements provided in-depth insights into altered chemo-mechanical properties of the myosin motors that affect the sliding speed. Notably, we found that the mechanical output of both slow and fast myosins is sensitive to the RLC isoform. We therefore propose that RLCs are crucial for fine-tuning the myosin function.

A small-molecule modulator of cardiac myosin acts on multiple stages of the myosin chemomechanical cycle

Mavacamten, formerly known as MYK-461 is a recently discovered novel small-molecule modulator of cardiac myosin that targets the underlying sarcomere hypercontractility of hypertrophic cardiomyopathy, one of the most prevalent heritable cardiovascular disorders. Studies on isolated cells and muscle fibers as well as intact animals have shown that mavacamten inhibits sarcomere force production, thereby reducing cardiac contractility. Initial mechanistic studies have suggested that mavacamten primarily reduces the steady-state ATPase activity by inhibiting the rate of phosphate release of β-cardiac myosin-S1, but the molecular mechanism of action of mavacamten has not been described. Here we used steady-state and presteady-state kinetic analyses to investigate the mechanism of action of mavacamten. Transient kinetic analyses revealed that mavacamten modulates multiple steps of the myosin chemomechanical cycle. In addition to decreasing the rate-limiting step of the cycle (phosphate release), mavacamten reduced the number of myosin-S1 heads that can interact with the actin thin filament during transition from the weakly to the strongly bound state without affecting the intrinsic rate. Mavacamten also decreased the rate of myosin binding to actin in the ADP-bound state and the ADP-release rate from myosin-S1 alone. We, therefore, conclude that mavacamten acts on multiple stages of the myosin chemomechanical cycle. Although the primary mechanism of mavacamten-mediated inhibition of cardiac myosin is the decrease of phosphate release from β-cardiac myosin-S1, a secondary mechanism decreases the number of actin-binding heads transitioning from the weakly to the strongly bound state, which occurs before phosphate release and may provide an additional method to modulate myosin function.

Evidence That the Pi Release Event Is the Rate-Limiting Step in the Nitrogenase Catalytic Cycle

Nitrogenase reduction of dinitrogen (N2) to ammonia (NH3) involves a sequence of events that occur upon the transient association of the reduced Fe protein containing two ATP molecules with the MoFe protein that includes electron transfer, ATP hydrolysis, Pi release, and dissociation of the oxidized, ADP-containing Fe protein from the reduced MoFe protein. Numerous kinetic studies using the nonphysiological electron donor dithionite have suggested that the rate-limiting step in this reaction cycle is the dissociation of the Fe protein from the MoFe protein. Here, we have established the rate constants for each of the key steps in the catalytic cycle using the physiological reductant flavodoxin protein in its hydroquinone state. The findings indicate that with this reductant, the rate-limiting step in the reaction cycle is not protein-protein dissociation or reduction of the oxidized Fe protein, but rather events associated with the Pi release step. Further, it is demonstrated that (i) Fe protein transfers only one electron to MoFe protein in each Fe protein cycle coupled with hydrolysis of two ATP molecules, (ii) the oxidized Fe protein is not reduced when bound to MoFe protein, and (iii) the Fe protein interacts with flavodoxin using the same binding interface that is used with the MoFe protein. These findings allow a revision of the rate-limiting step in the nitrogenase Fe protein cycle.

Effect of N-Terminal Extension of Cardiac Troponin I on the Ca(2+) Regulation of ATP Binding and ADP Dissociation of Myosin II in Native Cardiac Myofibrils

Cardiac troponin I (cTnI) has a unique N-terminal extension that plays a role in modifying the calcium regulation of cardiac muscle contraction. Restrictive cleavage of the N-terminal extension of cTnI occurs under stress conditions as a physiological adaptation. Recent studies have shown that in comparison with controls, transgenic mouse cardiac myofibrils containing cTnI lacking the N-terminal extension (cTnI-ND) had a lower sensitivity to calcium activation of ATPase, resulting in enhanced ventricular relaxation and cardiac function. To investigate which step(s) of the ATPase cycle is regulated by the N-terminal extension of cTnI, here we studied the calcium dependence of cardiac myosin II ATPase kinetics in isolated cardiac myofibrils. ATP binding and ADP dissociation rates were measured by using stopped-flow spectrofluorimetry with mant-dATP and mant-dADP, respectively. We found that the second-order mant-dATP binding rate of cTnI-ND mouse cardiac myofibrils was 3-fold faster than that of wild-type myofibrils at low Ca(2+) concentrations. The ADP dissociation rate of cTnI-ND myofibrils was positively dependent on calcium concentration, while the wild-type controls were not significantly affected. These data from experiments using native cardiac myofibrils under physiological conditions indicate that modification of the N-terminal extension of cTnI plays a role in the calcium regulation of the kinetics of actomyosin ATPase.

The rates of Ca2+ dissociation and cross-bridge detachment from ventricular myofibrils as reported by a fluorescent cardiac troponin C

The rate-limiting step of cardiac muscle relaxation has been proposed to reside in the myofilament. Both the rates of cross-bridge detachment and Ca(2+) dissociation from troponin C (TnC) have been hypothesized to rate-limit myofilament inactivation. In this study we used a fluorescent TnC to measure both the rate of Ca(2+) dissociation from TnC and the rate of cross-bridge detachment from several different species of ventricular myofibrils. The fluorescently labeled TnC was sensitive to both Ca(2+) dissociation and cross-bridge detachment at low Ca(2+) (presence of EGTA), allowing for a direct comparison between the two proposed rates of myofilament inactivation. Unlike Ca(2+) dissociation from TnC, cross-bridge detachment varied in myofibrils from different species and was rate-limited by ADP release. At subphysiological temperatures (<20 °C), the rate of Ca(2+) dissociation from TnC was faster than the rate of cross-bridge detachment in the presence of ADP. These results support the hypothesis that cross-bridge detachment rate-limits relaxation. However, Ca(2+) dissociation from TnC was not as temperature-sensitive as cross-bridge detachment. At a near physiological temperature (35 °C) and ADP, the rate of cross-bridge detachment may actually be faster than the rate of Ca(2+) dissociation. This provides evidence that there may not be a simple, single rate-limiting step of myofilament inactivation.

Correlation between cross-bridge kinetics obtained from Trp fluorescence of myofibril suspensions and mechanical studies of single muscle fibers in rabbit psoas

Our goal is to correlate kinetic constants obtained from fluorescence studies of myofibril suspension with those from mechanical studies of skinned muscle fibers from rabbit psoas. In myofibril studies, the stopped-flow technique with tryptophan fluorescence was used; in muscle fiber studies, tension transients with small amplitude sinusoidal length perturbations were used. All experiments were performed using the equivalent solution conditions (200 mM ionic strength, pH 7.00) at 10°C. The concentration of MgATP was varied to characterize kinetic constants of the ATP binding step 1 (K (1): dissociation constant), the binding induced cross-bridge detachment step 2 (k (2), k (-2): rate constants), and the ATP cleavage step 3 (k (3), k (-3)). In myofibrils we found that K (1) = 0.52 ± 0.08 mM (±95% confidence limits), k (2) = 242 ± 24 s(-1), and k (-2) ≈ 0; in muscle fibers, K (1) = 0.46 ± 0.06 mM, k (2) = 286 ± 32 s(-1), and k (-2) = 57 ± 21 s(-1). From these results, we conclude that myofibrils and muscle fibers exhibit nearly equal ATP binding step, and nearly equal ATP binding induced cross-bridge detachment step. Consequently, there is a good correlation between process C (phase 2 of step analysis) and the cross-bridge detachment step. The reverse detachment step is finite in fibers, but almost absent in myofibrils. We further studied partially cross-linked myofibrils and found little change in steps 2 and 3, indicating that cross-linking does not affect these steps. However, we found that K (1) is 2.5× of native myofibrils, indicating that MgATP binding is weakened by the presence of the extra load. We further studied the phosphate (Pi) effect in myofibrils, and found that Pi is a competitive inhibitor of MgATP, with the inhibitory dissociation constant of ~9 mM. Similar results were also deduced from fiber studies. To characterize the ATP cleavage step in myofibrils, we measured the slow rate constant in fluorescence, and found that k (3) + k (-3) = 16 ± 1 s(-1).

Micromechanical function of myofibrils isolated from skeletal and cardiac muscles of the zebrafish

The zebrafish is a potentially important and cost-effective model for studies of development, motility, regeneration, and inherited human diseases. The object of our work was to show whether myofibrils isolated from zebrafish striated muscle represent a valid subcellular contractile model. These organelles, which determine contractile function in muscle, were used in a fast kinetic mechanical technique based on an atomic force probe and video microscopy. Mechanical variables measured included rate constants of force development (k_ACT) after Ca²⁺ activation and of force decay (τ_REL⁻¹) during relaxation upon Ca²⁺ removal, isometric force at maximal (F_max) or partial Ca²⁺ activations, and force response to an external stretch applied to the relaxed myofibril (F_pass). Myotomal myofibrils from larvae developed greater active and passive forces, and contracted and relaxed faster than skeletal myofibrils from adult zebrafish, indicating developmental changes in the contractile organelles of the myotomal muscles. Compared with murine cardiac myofibrils, measurements of adult zebrafish ventricular myofibrils show that k_ACT, F_max, Ca²⁺ sensitivity of the force, and F_pass were comparable and τ_REL⁻¹ was smaller. These results suggest that cardiac myofibrils from zebrafish, like those from mice, are suitable contractile models to study cardiac function at the sarcomeric level. The results prove the practicability and usefulness of mechanical and kinetic investigations on myofibrils isolated from larval and adult zebrafish muscles. This novel approach for investigating myotomal and myocardial function in zebrafish at the subcellular level, combined with the powerful genetic manipulations that are possible in the zebrafish, will allow the investigation of the functional primary consequences of human disease–related mutations in sarcomeric proteins in the zebrafish model.

Insights into the kinetics of Ca2+-regulated contraction and relaxation from myofibril studies

Muscle contraction results from force-generating interactions between myosin cross-bridges on the thick filament and actin on the thin filament. The force-generating interactions are regulated by Ca(2+) via specialised proteins of the thin filament. It is controversial how the contractile and regulatory systems dynamically interact to determine the time course of muscle contraction and relaxation. Whereas kinetics of Ca(2+)-induced thin-filament regulation is often investigated with isolated proteins, force kinetics is usually studied in muscle fibres. The gap between studies on isolated proteins and structured fibres is now bridged by recent techniques that analyse the chemical and mechanical kinetics of small components of a muscle fibre, subcellular myofibrils isolated from skeletal and cardiac muscle. Formed of serially arranged repeating units called sarcomeres, myofibrils have a complete fully structured ensemble of contractile and Ca(2+) regulatory proteins. The small diameter of myofibrils (few micrometres) facilitates analysis of the kinetics of sarcomere contraction and relaxation induced by rapid changes of [ATP] or [Ca(2+)]. Among the processes studied on myofibrils are: (1) the Ca(2+)-regulated switch on/off of the troponin complex, (2) the chemical steps in the cross-bridge adenosine triphosphatase cycle, (3) the mechanics of force generation and (4) the length dynamics of individual sarcomeres. These studies give new insights into the kinetics of thin-filament regulation and of cross-bridge turnover, how cross-bridges transform chemical energy into mechanical work, and suggest that the cross-bridge ensembles of each half-sarcomere cooperate with each other across the half-sarcomere borders. Additionally, we now have a better understanding of muscle relaxation and its impairment in certain muscle diseases.

The mechanism of the reverse recovery step, phosphate release, and actin activation of Dictyostelium myosin II

The rate-limiting step of the myosin basal ATPase (i.e. in absence of actin) is assumed to be a post-hydrolysis swinging of the lever arm (reverse recovery step), that limits the subsequent rapid product release steps. However, direct experimental evidence for this assignment is lacking. To investigate the binding and the release of ADP and phosphate independently from the lever arm motion, two single tryptophan-containing motor domains of Dictyostelium myosin II were used. The single tryptophans of the W129+ and W501+ constructs are located at the entrance of the nucleotide binding pocket and near the lever arm, respectively. Kinetic experiments show that the rate-limiting step in the basal ATPase cycle is indeed the reverse recovery step, which is a slow equilibrium step (k(forward) = 0.05 s(-1), k(reverse) = 0.15 s(-1)) that precedes the phosphate release step. Actin directly activates the reverse recovery step, which becomes practically irreversible in the actin-bound form, triggering the power stroke. Even at low actin concentrations the power stroke occurs in the actin-attached states despite the low actin affinity of myosin in the pre-power stroke conformation.

Mechanism of tension generation in muscle: an analysis of the forward and reverse rate constants

Tension generation in muscle occurs during the attached phase of the ATP-powered cyclic interaction of myosin heads with thin filaments. The transient nature of tension-generating intermediates and the complexity of the mechanochemical cross-bridge cycle have impeded a quantitative description of tension generation. Recent experiments performed under special conditions yielded a sigmoidal dependence of fiber tension on temperature--a unique case that simplifies the system to a two-state transition. We have applied this two-state analysis to kinetic data obtained from biexponential laser temperature-jump tension transients. Here we present the forward and reverse rate constants for de novo tension generation derived from analysis of the kinetics of the fast laser temperature-jump phase tau(2) (equivalent of the length-jump phase 2(slow)). The slow phase tau(3) is temperature-independent indicating coupling to rather than a direct role in, de novo tension generation. Increasing temperature accelerates the forward, and slows the reverse, rate constant for the creation of the tension-generating state. Arrhenius behavior of the forward and anti-Arrhenius behavior of the reverse rate constant is a kinetic signature of multistate multipathway protein-folding reactions. We conclude that locally unfolded tertiary and/or secondary structure of the actomyosin cross-bridge mediates the power stroke.

Effect of strain on actomyosin kinetics in isometric muscle fibers

Investigations were conducted into the biochemical and mechanical states of cross-bridges during isometric muscle contraction. Rapid length steps (3 or 6 nm hs(-1)) were applied to rabbit psoas fibers, permeabilized and isometric, at either 12 degrees C or 20 degrees C. Fibers were activated by photolysis of P(3)-1-(2-nitrophenyl)-ethyl ester of ATP infused into rigor fibers at saturating Ca(2+). Sarcomere length, tension, and phosphate release were recorded-the latter using the MDCC-PBP fluorescent probe. A reduction in strain, induced by a rapid release step, produced a short-lived acceleration of phosphate release. Rates of the phosphate transient and that of phases 3 and 4 of tension recovery were unaffected by step size but were elevated at higher temperatures. In contrast the amplitude of the phosphate transient was smaller at 20 degrees C than 12 degrees C. The presence of 0.5 or 1.0 mM added ADP during a release step reduced both the rate of tension recovery and the poststep isometric tension. A kinetic scheme is presented to simulate the observed data and to precisely determine the rate constants for the elementary steps of the ATPase cycle.

Endothermic force generation, temperature-jump experiments and effects of increased [MgADP] in rabbit psoas muscle fibres

We studied, by experiment and by kinetic modelling, the characteristics of the force increase on heating (endothermic force) in muscle. Experiments were done on maximally Ca2+-activated, permeabilized, single fibres (length approximately 2 mm; sarcomere length, 2.5 microm) from rabbit psoas muscle; [MgATP] was 4.6 mM, pH 7.1 and ionic strength was 200 mM. A small-amplitude (approximately 3 degrees C) rapid laser temperature-jump (0.2 ms T-jump) at 8-9 degrees C induced a tension rise to a new steady state and it consisted of two (fast and slow) exponential components. The T-jump-induced tension rise became slower as [MgADP] was increased, with half-maximal effect at 0.5 mM [MgADP]; the pre- and post-T-jump tension increased approximately 20% with 4 mM added [MgADP]. As determined by the tension change to small, rapid length steps (<1.4%L0 complete in <0.5 ms), the increase of force by [MgADP] was not associated with a concomitant increase of stiffness; the quick tension recovery after length steps (Huxley-Simmons phase 2) was slower with added MgADP. In steady-state experiments, the tension was larger at higher temperatures and the plot of tension versus reciprocal absolute temperature was sigmoidal, with a half-maximal tension at 10-12 degrees C; the relation with added 4 mM MgADP was shifted upwards on the tension axis and towards lower temperatures. The potentiation of tension with 4 mM added MgADP was 20-25% at low temperatures (approximately 5-10 degrees C), but approximately 10% at the physiological temperatures (approximately 30 degrees C). The shortening velocity was decreased with increased [MgADP] at low and high temperatures. The sigmoidal relation between tension and reciprocal temperature, and the basic effects of increased [MgADP] on endothermic force, can be qualitatively simulated using a five-step kinetic scheme for the crossbridge/A-MATPase cycle where the force generating conformational change occurs in a reversible step before the release of inorganic phosphate (P(i)), it is temperature sensitive (Q10 of approximately 4) and the release of MgADP occurs by a subsequent, slower, two-step mechanism. Modelling shows that the sigmoidal relation between force and reciprocal temperature arises from conversion of preforce-generating (A-M.ADP.P(i)) states to force-bearing (A-M.ADP) states as the temperature is raised. A tension response to a simulated T-jump consists of three (one fast and two slow) components, but, by combining the two slow components, they could be reduced to two; their relative amplitudes vary with temperature. The model can qualitatively simulate features of the tension responses induced by large-T-jumps from low starting temperatures, and those induced by small-T-jumps from different starting temperatures and, also, the interactive effects of P(i) and temperature on force in muscle fibres.

Does phosphate release limit the ATPases of soleus myofibrils? Evidence that (A)M. ADP.Pi states predominate on the cross-bridge cycle

The ATPases (+/-Ca2+) of myofibrils from rabbit soleus (a slow muscle) and psoas (a fast muscle) have different Ea: -Ca2+, 78 and 60 kJ/mol and +Ca2+, 155 and 71 kJ/mol, respectively. At physiological temperatures, the two types of myofibrillar ATPase are very similar and yet the mechanical properties of the muscles are different (Candau et al. (2003) Biophys J 85: 3132-3141). Muscle contraction relies on specific interactions of the different chemical states on the myosin head ATPase pathway with the thin filament. An explanation for the Ea data is that different states populate the pathways of the two types of myofibril because the rate limiting steps are different. Here, we put this to the test by a comparison of the transient kinetics of the initial steps of the ATPases of the two types of myofibril at 4 degrees C. We used two methods: rapid flow quench ('cold ATP chase': titration of active sites, ATP binding kinetics, k(cat); 'Pi burst': ATP cleavage kinetics) and fluorescence stopped-flow (MDCC-phosphate binding protein for free Pi; myofibrillar tryptophan fluorescence for myosin head-thin filament detachment and ATP cleavage kinetics). We find that, as with psoas myofibrils, the most populated state on the cross-bridge cycle of soleus myofibrils, whether relaxed or activated, is (A)M.ADP.Pi. We propose a reaction pathway that includes several (A)M.ADP.Pi sub-states that are either 'weak' or 'strong', depending on the mechanical condition.

Myofibrillar myosin ATPase activity in hindlimb muscles from young and aged rats

We tested the hypothesis that Ca(2+)-activated myosin ATPase activity is lower in muscles of aged rats relative to muscles of young rats, independent of changes in myosin isoform expression. Myofibrils were prepared from permeabilized fibers of soleus, plantaris, and semimembranosus muscles of young (8-12 months) and aged (32-38 months) F344 x BN rats and assayed for resting myosin ATPase, Ca(2+)-activated myosin ATPase, and myosin heavy chain (MHC) and myosin light chain (MLC) isoform compositions. Resting myosin ATPases were not affected by age in any muscle (P > or = 0.42). Ca(2+)-activated myosin ATPases of soleus and plantaris myofibrils were not affected by age (P > or = 0.31) but were 16% lower in semimembranosus myofibrils from aged rats (0.448 +/- 0.019 micromol P(i)/min/mg) compared to young rats (0.533 +/- 0.031 micromol P(i)/min/mg; P = 0.03). Correspondingly, maximal unloaded shortening velocity of single semimembranosus fibers from aged rats was slow (4.6 +/- 0.2 fiber lengths/s) compared with fibers from young rats (5.8 +/- 0.3 fiber lengths/s; P < 0.01). No age-related changes in MHC or regulatory MLC isoforms were detected in any muscle (P > or = 0.08) but changes in the essential MLC occurred in plantaris and semimembranosus muscles. The data indicate that Ca(2+)-activated myosin ATPase activity is reduced with age in semimembranosus muscle, independent of age-related changes in MHC isoform expression, and is one mechanism contributing to age-related slowing of contraction in that muscle.

Coupling between phosphate release and force generation in muscle actomyosin

Energetic, kinetic and oxygen exchange experiments in the mid-1980s and early 1990s suggested that phosphate (Pi) release from actomyosin-adenosine diphosphate Pi (AM.ADP.Pi) in muscle fibres is linked to force generation and that Pi release is reversible. The transition leading to the force-generating state and subsequent Pi release were hypothesized to be separate, but closely linked steps. Pi shortens single force-generating actomyosin interactions in an isometric optical clamp only if the conditions enable them to last 20-40 ms, enough time for Pi to dissociate. Until 2003, the available crystal forms of myosin suggested a rigid coupling between movement of switch II and tilting of the lever arm to generate force, but they did not explain the reciprocal affinity myosin has for actin and nucleotides. Newer crystal forms and other structural data suggest that closing of the actin-binding cleft opens switch I (presumably decreasing nucleotide affinity). These data are all consistent with the order of events suggested before: myosin.ADP.Pi binds weakly, then strongly to actin, generating force. Then Pi dissociates, possibly further increasing force or sliding.

Mechanokinetics of rapid tension recovery in muscle: the Myosin working stroke is followed by a slower release of phosphate

Crystallographic and biochemical evidence suggests that the myosin working stroke that generates force in muscle is accompanied by the release of inorganic phosphate (Pi), but the order and relative speed of these transitions is not firmly established. To address this problem, the theory of A. F. Huxley and R. M. Simmons for the length-step response is averaged over elastic strains imposed by filament structure and extended to include a Pi-release transition. Models of this kind are applied to existing tension-recovery data from length steps at different phosphate concentrations, and from phosphate jumps upon release of caged phosphate. This body of data is simulated by the model in which the force-generating event is followed by Pi release. A version in which the Pi-release transition is slow provides a better fit than a version with rapid Pi release and a slow transition preceding force generation. If Pi is released before force generation, the predicted rate of slow recovery increases with the size of the step, which is not observed. Some implications for theories of muscle contraction are discussed.

Why choose myofibrils to study muscle myosin ATPase?

Our objective is to propose an overview of the usefulness of skeletal myofibril as an experimental system for studying mechanochemical coupling of skeletal muscles and myosin ATPase activity. The myofibril is a true functional mini-muscle that is able to contract in the presence of ATP. It also contains the machinery necessary for the calcium sensitivity of the contraction. In the absence of calcium, myofibrillar ATPase activity is basal, no shortening occurs and no active force is developed. In the presence of calcium, myofibrillar ATPase is activated and myofibrils either shorten with no external load (native myofibrils) or contract isometrically (cross-linked myofibrils). With this organised system, both chemical and mechanical studies can be carried out. For a decade, our laboratory has been using rabbit psoas myofibrils for exploring myosin ATPase activity. The first challenge was to successfully apply rapid kinetic approaches, such as rapid-flow-quench, to this organised system. Another challenge was to work with myofibrils in cryoenzymic conditions, i.e. in the presence of organic solvents and at sub-zero temperatures. In this overview, we highlight differences between the myosin ATPase in organised systems (myofibrils or fibres) and that of contractile proteins in solution (S1 or actoS1) that we observed using these approaches. We discuss the importance of these differences in terms of mechanochemical coupling. It is concluded that great care should be taken when extrapolating mechanochemical properties of the contractile proteins in solution to the whole muscle.

At physiological temperatures the ATPase rates of shortening soleus and psoas myofibrils are similar

We obtained the temperature dependences of the adenosine triphosphatase (ATPase) activities (calcium-activated and relaxed) of myofibrils from a slow muscle, which we compared with those from a fast muscle. We chose rabbit soleus and psoas because their myosin heavy chains are almost pure: isoforms I and IIX, respectively. The Arrhenius plots of the ATPases are linear (4-35 degrees C) with energies of activation for soleus myofibrils 155 kJ mol(-1) (activated) and 78 kJ mol(-1) (relaxed). With psoas myofibrils, the energies of activation were 71 kJ mol(-1) (activated) and 60 kJ mol(-1) (relaxed). When extrapolated to 42 degrees C the ATPase rates of the two types of myofibril were identical: 50 s(-1) (activated) and 0.23 s(-1) (relaxed). Whereas with psoas myofibrils the K(m) for adenosine triphosphate (activated ATPase) is relatively insensitive to temperature, that for soleus myofibrils increased from 0.3 microM at 4 degrees C to 66.5 microM at 35 degrees C. Our results illustrate the importance of temperature when comparing the mechanochemical coupling in different types of muscle. We discuss the problem of how to reconcile the similarity of the myofibrillar ATPase rates at physiological temperatures with their different mechanical properties.